materials drying product guide

click here

Find out where your nearest Maguire Partner

is located …

04ContaCt

click here

View our full technical specification and energy

usage comparison …

03Model

suMMary

click here

The dryer operates with 3 stainless steel

canisters that are mounted …

02How it works

click here

Our dryers are proven to dry all types of polymers

in a fraction …

01overview

Materials DryingProduct Guide

Our Vacuum dryers are prOVen tO dry plastics materials 6 times faster than cOnVentiOnal dryers

http://www.maguire.com

A revolution in dryersMaguire Vacuum dryers are proven to dry plastics materials 6 times faster than conventional dryers and use up to 85% less energy.

Speed of DryingTypically the vacuum dryer will dry materials in one-sixth the time of a desiccant dryer. If your desiccant dryer drying time is 4 hours, the vacuum dryer will do the job in 40 minutes. The result is time-savings of 3 hours and 20 minutes every time you start up a dryer. This not only represents reduced energy cost, but could also represent 3 hours and 20 minutes of additional production time.

Energy SavingsSide-by-side testing of the vacuum dryer and a desiccant dryer shows reduced energy consumption of 70 - 85%. The key to the reduced energy consumption is that the vacuum dryer does not rely on desiccant. Desiccant, once saturated, must be regenerated by a heating and cooling process so it will again be able to absorb moisture. All energy required to regenerate desiccant is lost to ambient.

85%reduction in energy useSpeed of Drying Reduced Maintenance

Maguire Vacuum Dryer – drying time

Additional free production time40 mins

0 1 2 3 4DRying houRS

Desiccant Dryer – drying time

4 hours

83%reduction in drying time Maguire

Vacuum Dryer Desiccant Dryer

70-85%Saving on

youR eneRgy conSuMption

Typically the vacuum dryer will dry materials in one-sixth the time of a desiccant dryer.

OVerViewOur dryers are proven to dry all types of polymers in a fraction …

5yeArwArrAnTy

Maguire Products offers one of the most comprehensive warranties in the plastics industry.

✓

ProDucT GuiDe Materials Drying OVerView

cOntactFind out where your nearest Maguire Partner is located …

mOdel summaryView our full technical specification and energy usage comparison …

hOw it wOrksThe dryer operates with 3 stainless steel canisters that are mounted …

a reVOlutiOn in dryers

VBd Vacuum dryer

lpd Vacuum dryer

VACUUM DRYER LOW MAINTENANCE

DESICCANT HIGH MAINTENANCE

A revolution in dryersMaguire Vacuum dryers are proven to dry plastics materials 6 times faster than conventional dryers and use up to 85% less energy.

Reduced MaintenanceSince desiccant degrades over time it must be replaced on a regular basis. This expense is avoided with a vacuum dryer. In addition the need to monitor the condition of desiccant is eliminated.

Low Material StressLong drying times at elevated temperatures can cause thermal, chemical and physical material degradation. Materials if exposed to prolonged elevated temperature during drying run the risk of degradation including discoloration and/or IV drop which leads to reduced physical properties of the end product.

Speed of Drying Reduced Maintenance

The reduced drying time required with the vacuum dryer dramatically reduces the risk of material degradation. Since the vacuum

dryer first heats up the material, then applies vacuum to accomplish

drying, the heating cycle is only 20 to 30 minutes.


5yeArwArrAnTy


✓






VBd Vacuum dryer

lpd Vacuum dryer

• continuous batch drying process.

• -40° dew point air is bled into vacuum and retention hoppers.

• vertical design minimizes footprint.

• no heat loss is guaranteed with double-insulation on all vessels.

• Reduced Maintenance – no desiccant to change – no filters to clean.

• Faster drying improves production planning.

• “no stress” material drying – means no material degradation.

• process temperatures up to 360°F (190°c).

• vacuum take-off or gravity feed material discharge available.

• Backed by same 5-year warranty as all Maguire products.

VBD Vacuum DryerImproved design obsoletes moving canisters and minimizes moving parts.

less energythan desiccant

dryers

50%per hour in 1/6

of the time

1000lb

Dry up toLowmaintenance

MODELVBD-1000

VIEW MODEL VBD-150 cLIck hERE


5yeArwArrAnTy


✓






VBd Vacuum dryer

lpd Vacuum dryer

less energythan desiccant

dryers

50%per hour in 1/6

of the time

1000lb

Dry up toLowmaintenance

MODELVBD-1000

VIEW MODEL VBD-150 cLIck hERE

• continuous batch drying process.

• -40° dew point air is bled into vacuum and retention hoppers.

• vertical design minimizes footprint.

• no heat loss is guaranteed with double-insulation on all vessels.

• Reduced Maintenance – no desiccant to change – no filters to clean.

• Faster drying improves production planning.

• “no stress” material drying – means no material degradation.

• process temperatures up to 360°F (190°c).

• vacuum take-off or gravity feed material discharge available.

• Backed by same 5-year warranty as all Maguire products.

VBD Vacuum DryerImproved design obsoletes moving canisters and minimizes moving parts.


5yeArwArrAnTy


✓






VBd Vacuum dryer

lpd Vacuum dryer

cLOSE

x

MoDeLvBD-150The VBD-150 offers the same fast and economical drying as the VBD-1000. It is mounted on a rigid frame with a footprint of only 5.5 sq. ft. Large casters allow it to be quickly moved around the plant.

The vacuum vessel and retention hopper are easily removed for cleaning.

LPD Vacuum DryerProven technology with over 2400 LPD installed globally.

The LPD-30 Dryer is part of the first series of Vacuum Drying Systems from Maguire, a range with over 2,400 dryers installed worldwide.

whilst larger kg/h applications benefit from the new design of the VBD series, for small kg/h technical drying requirements the LPD-30 remains the standard solution given how popular the system design has been for a range of tool making and prototyping processes.

A key attraction of the 3 canister standard deign is the fact that multiple materials can be processed though the dryer in sequence – in the form of on-the-fly material changes.

On-ThE-FLy MaTERIaL changE

Downtime During

clean-out

No

No interruption of the drying process occurs during the on-the-fly material change.

• Since the vacuum dryer dries in batches a material or color change can be accomplished on-the-fly.

• This means no downtime related to clean-out of the drying hopper during a material change.

• every time you have a material change with a desiccant dryer the dryer must be shutdown and the drying hopper cleaned. This is normally a time consuming and labor-intensive process.

• The LPD vacuum dryer will automatically notify the operator when it's time to conduct an on-the-fly material change.

• no interruption of the drying process occurs during the on-the-fly material change.

• This makes the LPD-30 size and portability ideal for tool makers and rapid prototyping, alongside small technical moulding also.


5yeArwArrAnTy


✓






VBd Vacuum dryer

lpd Vacuum dryer

3 Stage drying processThe dryer operates in a 3 step process and the material goes through the drying steps accordingly.

STagE 1

Material in the heating hopper is brought to set point by means of a centrifugal blower through a 40 Kw heating element. The requested heating temperature is adjusted on the control panel and the cycle lasts 45 minutes (60 minutes for PeT).

STagE 2

Upon reaching the desired set point, heated material is discharged from the heating hopper into the vacuum vessel. The vacuum is brought to 75mm Hg absolute pressure and held to a 20mm Hg differential for the set cycle time. The vacuum cycle typically lasts for about 20 minutes so you have ready-to-process material in 65 - 80 minutes.

STagE 3

The dried material is discharged into an insulated retention / take-off hopper for consumption. A positive pressure heated dry air purge is maintained on the material.

STagE 1

STagE 2

STagE 3

SEE hOW ThE LPD SySTEM WORkS cLIck hERE

Maguire vBD 3 Stage drying process





5yeArwArrAnTy


✓

3 stage drying prOcess

cOntrOllers

hOw it wOrksProDucT GuiDe

Materials Drying

STagE 1

STagE 2

STagE 3

Maguire vBD 3 Stage drying process

SEE hOW ThE LPD SySTEM WORkS cLIck hERE

3 Stage drying processThe dryer operates in a 3 step process and the material goes through the drying steps accordingly.

STagE 1

Material in the heating hopper is brought to set point by means of a centrifugal blower through a 40 Kw heating element. The requested heating temperature is adjusted on the control panel and the cycle lasts 45 minutes (60 minutes for PeT).

STagE 2

Upon reaching the desired set point, heated material is discharged from the heating hopper into the vacuum vessel. The vacuum is brought to 75mm Hg absolute pressure and held to a 20mm Hg differential for the set cycle time. The vacuum cycle typically lasts for about 20 minutes so you have ready-to-process material in 65 - 80 minutes.

STagE 3

The dried material is discharged into an insulated retention / take-off hopper for consumption. A positive pressure heated dry air purge is maintained on the material.





5yeArwArrAnTy


✓


cOntrOllers


Materials Drying

cLOSE

x

STagE 1

STagE 3

STagE 2

Maguire LpD 3 Stage drying process

Controllers

• Four buttons provide access for setting operation mode, adjusting dryer parameters and many additional program functions.

• The controller monitors numerous alarm conditions to ensure proper performance. Comparable to a dew point monitor, vacuum level is always monitored to ensure proper vacuum level is maintained.

• Alarms are shown on the display and signaled by an alarm light and horn with silence function.

• As an aid to monitoring dryer performance and documenting operation reports can be generated via a USB port to either a memory stick or printer. A printer port is provided on the LPD controller.

• Program updates via flash memory using a standard USB memory device.

• The display will indicate temperature and elapsed cycle time or, alternatively, temperature and vacuum level. If a problem occurs during operation an alarm strobe and horn will be activated and the nature of the problem will be indicated on the display.

• The controller can be easily removed for service or replacement. If you have a controller problem a complete new control panel may be installed in minutes.

screens to monitor

twoonly

Four buttons provide access for setting operation mode, adjusting dryer parameters and many additional program functions.

The display will indicate temperature and elapsed cycle time or, alternatively, temperature and vacuum level.

LPD cOnTROLLER

VBD cOnTROLLER

Simple is betterNo confusing icons





5yeArwArrAnTy


✓


Materials Drying


cOntrOllers

Technical Specification

viewModel Drawings

cLIck hERE

i

Model

LPD-30 VBD-150 VBD-1000

U.S. Metric U.S. Metric U.S. Metric

Maximum Throughput up to 30 lb/hr up to 15 Kg/hr up to 200 lb/hr up to 95 Kg/hr Up to 1000 lb/hr up to 455 Kg/hr

Heating Hopper Volume 0.32 cu ft 9 L 76 lb (2 ft3) 34.6 Kg (56 L) 1200 lb (26 ft3) 544 Kg (735 L)

Vacuum Vessel Volume 0.32 cu ft 9 L 38 lb (1 ft3) 17.3 Kg (28 L) 1200 lb (26 ft3) 180 Kg (297 L)

Retention Hopper Volume 0.32 cu ft 9 L 50 lb (1.3 ft3) 22.5 Kg (37 L) 1200 lb (26 ft3) 180 Kg (297 L)

Max. Temperature 360°F 190°C 360°F 190°C 360°F 190°C

Power Supply 460V/3Ph/60Hz 3.47 kW / 16 A

400V/3Ph/50Hz 3.47 kW / 16 A

480V/3ph/60Hz 100 A Service




Process Heater 3 KW 6 KW 40 KW

Blower 0.5 hp / 2.5 A 0.37 kW / 2.5 A 1.1 HP, 105 scfm .82 KW, 2973 L/min 10 HP, 600 scfm 7.5 KW, 16990 L/min

Compressed Air Pressure 70-90 psi 6 - 8 bar 80 psi 5.5 bar 80 psi 5.5 bar

Compressed Air Usage 0.4 cfm 0.7 m3/h 12.5 ft3/hr 354 L/hr 169 ft3/hr 4757 L/hr

Product Weight 550 lb 250 Kg 501 lb 228 Kg 2500 lb 1135 Kg

Dual Bed VBD

Nylon at 170°F ( 77°C) watts/Kg/hr watts/Kg/hr

Electrical consumption only 81.8 30.8

Compressed air generation electrical requirement for 9.8 SCFM

8.1

TOTAL True Energy Consumption 81.8 38.9

ENERGY SAVINGS 53%

PET at 300°F ( 148°C) watts/Kg/hr watts/Kg/hr


ENERGY SAVINGS 60%

energy usage comparisonDual Bed Desiccant Dryer vs. Maguire vBD-1000 vacuum DryerDrying 1000 lb/hr (454 kg/hour) of each of the following resins

VBD Dual Bed

Drying 1000 lb/hrnylon @ 170°

VBD Dual Bed

Drying 1000 lb/hrpet @ 300º

38.952.8

81.8 130.2





5yeArwArrAnTy


✓

mOdel summaryProDucT GuiDe

Materials Drying

Technical Specification

viewModel Drawings

cLIck hERE

i

Model

VBD-100 VBD-1000

U.S. Metric U.S. Metric

Maximum Throughput Up to 1000 lb/hr up to 455 Kg/hr Up to 1000 lb/hr up to 455 Kg/hr

Heating Hopper Volume 1200 lb (26 ft3) 544 Kg (735 L) 1200 lb (26 ft3) 544 Kg (735 L)

Vacuum Vessel Volume 1200 lb (26 ft3) 180 Kg (297 L) 1200 lb (26 ft3) 180 Kg (297 L)

Retention Hopper Volume 1200 lb (26 ft3) 180 Kg (297 L) 1200 lb (26 ft3) 180 Kg (297 L)

Max. Temperature 370°F 185°C 370°F 185°C

Power Supply 480V/3ph/60Hz 100 A Service




Process Heater 40 KW 40 KW

Blower 10 HP, 600 scfm 7.5 KW, 16990 L/min 10 HP, 600 scfm 7.5 KW, 16990 L/min

Compressed Air Pressure 80 psi 5.5 bar 80 psi 5.5 bar

Compressed Air Usage 169 ft3/hr 4757 L/hr 169 ft3/hr 4757 L/hr

Product Weight 2500 lb 1135 Kg 2500 lb 1135 Kg

Model

LPD-30

U.S. Metric

Standard version max. 265 ° F 130 ° C

High Heat version max. 300 ° F 150 ° C

Throughput 30 lb/h 0.32 cu ft

Canister volume 0.32 cu ft 9 l

Empty weight 550 lb 250 kg

Packing weight 620 lb 280 kg

Packing dim. (L x W x H) 40" x 35" x 75" 100 x 90 x 190 cm

Heater element 3 kW / 13 A

Blower 0.5 hp / 2.5 A 0.37 kW / 2.5 A

Total Power Supply 460V/3Ph/60Hz3.47 kW / 16 A

400V/3Ph/50Hz3.47 kW / 16 A

Compressed air requirement 70-90 psi 6 - 8 bar

Compressed usage 0.4 cfm 0.7 m3/h

Dual Bed VBD

Nylon at 170°F ( 77°C) watts/Kg/hr watts/Kg/hr

Electrical consumption only 81.8 30.8

Compressed air generation electrical requirement for 9.8 SCFM

8.1


ENERGY SAVINGS 53%

PET at 300°F ( 148°C) watts/Kg/hr watts/Kg/hr


ENERGY SAVINGS 60%

energy usage comparisonDual Bed Desiccant Dryer vs. Maguire vBD-1000 vacuum DryerDrying 1000 lb/hr (454 kg/hour) of each of the following resins

VBD Dual Bed

Drying 1000 lb/hrnylon @ 170°

VBD Dual Bed

Drying 1000 lb/hrpet @ 300º





5yeArwArrAnTy


✓

mOdel summaryProDucT GuiDe

Materials Drying

cLOSE

x

VBD-1000 VBD-150





5yeArwArrAnTy


✓

ProDucT GuiDe Materials Drying ContaCt

5-Year WarrantY Maguire Products offers one of the most comprehensive warranties in the plastics industry. We warrant all Maguire equipment to be free from defects in material and workmanship for 5 years from the date of delivery. In addition, we are committed to satisfying our customers in whatever manner is deemed most expedient to overcome any problems they may have in connection with Maguire equipment.

All information in this document is subject to change without notice. © 2013 MAGUIRE Products, Inc. All rights reserved Document #1013-VBD

nOrth america

sOuth america

eurOpe

africa

asia

middle east

key tO lOcatiOns

regional Head Offices

l Maguire Branches

l Maguire Partners

i

http://www.youtube.com/user/MaguireEurope

https://twitter.com/maguire_europe

http://www.linkedin.com/company/maguire-europe-emea





5yeArwArrAnTy


✓




nOrth america

sOuth america

eurOpe

africa

asia

middle east

key tO lOcatiOns


l Maguire Branches

l Maguire Partners

i

hEaD OFFIcES

Maguire uSa11 Crozerville roadAston, PA 19014Toll free: 888-459-2412Tel: 610-459-4300Fax: 610-459-2700email: [email protected]

Maguire canada299 Basaltic road, Unit 1Vaughan, Ontario, L4K 4w8Toll free: 866-441-8409Tel: 905-879-1100Fax: 905-879-1101email: [email protected]

PaRTnERS

neW engLanD teRRitoRy(Me, nh, Ma, ct, Ri, vt)HAMILTOn PLASTICS eqUIPMenT, LLC25 Bartlett DriveBedford, nH 03110Mark Hamiltontel: (603) 472-3282Fax: (603) 714-5746email: [email protected]: www.HamiltonPlasticsequipment.com

noRth neW JeRSey teRRitoRy(Se. ny, n. nJ)r. T. KUnTz COMPAny, InC.5142 west Hurley Poad roadP.O. Box 476Farmingdale, nJ 07727rod Kuntz, Brian Sampson and Scott Thompsontel: (732) 751-1770Fax: (732) 751-1505email: [email protected]: www.rtkuntz.com

THe MACHInery GrOUP1156 Springfield AveMountainside, nJ 07092Alan niebuhr, Tom waldron, Andrew niebuhr, and Chris Didonatotel: 908-389-1009Fax: 908-389-1060

MiD-atLantic teRRitoRy(e. pa, S. nJ, De, MD, va)PLASTIC MACHInery SALeS1365 Kings Hwy.Pilesgrove, nJ 08098Herb Keaton and Pat McGuiretel: (856) 769-1415Fax: (856) 769-1708email: [email protected]

PArAGOn MACHInery InC.244 wisteria DriveChurchville, PA 18966Steve etris, eric Hendersontel: 215-322-7386Fax: 215-355-1145email: [email protected]

SoutheaSteRn teRRitoRy(nc, Sc, ga, FL, aL, e. tn)JUST ADD PLASTIC, InC.5257 essex FarmsStone Mountain, GA 30088Pat Mcquade, Jim Kean, Tom Kean, and Gary eggerstel: (770) 981-3244Fax: (770) 593-2166email: [email protected]: www.JustAddPlastic.com

SOUTHeASTern POLyMer MACHInery, InC.2515 Ivy Street westCumming, GA 30041Contacts: walt Terry, Sr., walt Terry, Jr.tel: 770-889-3448Fax: 770-889-4988email: [email protected]: http://www.spm-inc.net

neW yoRK, WeSt pennSyLvania, anD WeSt viRginia teRRitoRyGeM CITy PLASTIC MACHInery, InC.99 Ken Mar Industrial ParkwayCleveland, OH 44147nick rajkovich, Jerry Pochatek, Scott Balcomtel: 440-526-0678Fax: 440-838-4757e-mail: [email protected]@[email protected]

ohio, inDiana, KentucKy teRRitoRyMIKe CInDIA SALeS, InC.7244 Hartman roadwadsworth, OH 44281Mike Cindia, Bret Irons, Craig Jans, Bill Birchtel: (330) 334 4994Fax: (330) 334 4996email: [email protected]

Michigan teRRitoRyMAnVeL MACHInery SALeS CO. InC.5275 Dixie Highway, Suite C-4waterford, MI 48329Harry Manvel, Jim weesiestel: (248) 666-7700Fax: (248) 666-3442email: [email protected]: http://www.Manvel.com

chicago teRRitoRy(n. iL, SW. Wi)nOrTHwOODS PrOCeSS TeCHnOLOGy911 Althoff Dr.McHenry, IL 60051Terry Devoytel: 847 514 5514email: [email protected]: www.npt-sales.com

noRth-centRaL teRRitoRy(nD, SD, Mn, W Wi, n. ia)CArrOLL enTerPrISeS, InC.Pete CarrollPat Carroll4100 elm StreetOrono, Mn 55356tel: 952-476-8767Fax: 952-476-0977email: [email protected]

centRaL teRRitoRy(ia, ne, Wy, co, KS, Mo, S. iL)BArry SALeS enGIneerInG, InC.1755 Larkin williams roadFenton, MO 63026Chris Barry, nick Klukvin, Timm Duceytel: (636) 326-1211email: [email protected]

South centRaL teRRitoRy(tX, nM, oK, aR, La, MS)ADAMS enGIneerS & eqUIPMenT, InC.13638 Highway 110 SouthTyler, TX 75713-0956Don Gruber, Patti Pinkerton, Cliff Adams, David Salls, Steve whitetel: (903) 561-8835Fax: (903) 561-6862email: [email protected]: http://www.adamsengineers.com

noRthWeSt teRRitoRy(Wa, oR, iD, Mt)wOODS PLASTICS eqUIPMenT1700 river Park Blvd.napa, Ca 94559Terry S. woodstel: 707-363-1514email: [email protected]: www.woodsplastics.com

SouthWeSt teRRitoRy(S. ca, aZ)HAnSen PLASTIC MACHInery SALeSBusiness address:1437 random LaneDuarte, CA 91010-2629Charlie Hansentel: (626) 359-7852Fax: (626) 359-0552email: [email protected]

noRth caLiFoRnia teRRitoRy(n. ca, nv, ut)SMITH MACHInery SALeS5279 n. Cambridge wayStansbury Park, UT 84074George Smithtel: 800-688-8760Fax: 435-249-0297email: [email protected]: www.smsplastics.com

nORTh aMERIca

x

mailto:info%40maguire.com?subject=


mailto:info%40maguirecanada.com?subject=

http://www.maguirecanada.com





5yeArwArrAnTy


✓




nOrth america

sOuth america

eurOpe

africa

asia

middle east

key tO lOcatiOns


l Maguire Branches

l Maguire Partners

i

SOUTh aMERIca

x

hEaD OFFIcE

Maguire uSa11 Crozerville roadAston, PA 19014Toll free: 888-459-2412Tel: 610-459-4300Fax: 610-459-2700email: [email protected]

MagUIRE OFFIcES

BRaZiLDéBOrA wOIGTGerente de vendasMaguire Productstel: (19) 8307-3000email: [email protected]

PaRTnERS

aRgentina, paRaguay & uRuguay BreGAr ArGenTInA S.A.Haiti 1772, B 1640 eBTMartinez, Buenos AiresArgentinaContact: esteban Hubertel: (54) 11-47170600Fax: (54) 11-47170909email: [email protected]: www.bregarargentina.com.ar

BRaZiLALIMATIC LTDA rua rosaria 32CeP 09061-080 Santo AndréSão Paulo-BrasilContact: Alexandre Corraditel: + 5511 4473 3711Fax: + 5511 4421 8312email: [email protected]

chiLePLASTeC U.S.A. InCOrPOrATeD7752 n.w. 74 AvenueMiami, Florida 33166David Sosa - Product Sales Mgr.Gladys estrada - Dryer Sales Mgr.tel: 1-305 887 6920Fax: 1-305 883 8254email: [email protected]: www.plastecusa.com

ALIMATIC LTDArua rosaria 32CeP 09061-080 Santo AndréSão Paulo-BrasilContact: Alexandre Corraditel: + 5511 4473 3711Fax: + 5511 4421 8312email: [email protected]

MeXico, centRaL & South aMeRicaPLASTeC U.S.A. InCOrPOrATeD7752 n.w. 74 AvenueMiami, Florida 33166David Sosa - Product Sales Mgr.Gladys estrada - Dryer Sales Mgr.tel: 1-305 887 6920Fax: 1-305 883 8254email: [email protected]: www.plastecusa.com

pueRto Rico & caRiBBeanPLASTeXPO Box 997Guaynabo, Pr 00970-0997John Hammeltel: 787-272-8050Fax: 787-830-2202email: [email protected]: www.plastexcorp.com

veneZueLaPLASTeC U.S.A. InCOrPOrATeD7752 n.w. 74 AvenueMiami, Florida 33166Janet Kevlin - Product Sales Managertel: 1-305 887 6920Fax: 1-305 883 8254Website: www.plastecusa.comemail: [email protected]

mailto:info%40maguire.com?subject=









5yeArwArrAnTy


✓




nOrth america

sOuth america

eurOpe

africa

asia

middle east

key tO lOcatiOns


l Maguire Branches

l Maguire Partners

i

hEaD OFFIcE

Maguire europeTame Park, Tamworth, StaffordshireB77 5Dy, UKTel: +44 1827 265 850Fax: +44 1827 265 855email: [email protected]

MagUIRE OFFIcE

itaLyMAGUIre ITALIAPadova - Italytel: +39 049 970 5429Fax: +39 049 971 1838email: [email protected]

PaRTnERS

auStRiaBüCHLer GeSMBHwipfingerstrasse 233433 KönigstettenMr. Peter Büchlertel: +43 2273 21 77 0Fax: +43 2273 21 77 22email: [email protected]: www.buechler.at

BeLgiuM, LuXeMBouRg & netheRLanDSPMe - PLASTIC MACHInery eqUIPMenT nVIndustriezone IIBallingsweg 25B-9620zottegemBelgiumyves DrappierGeneral Managertel: 32 9 361 03 31Fax: 32 9 361 03 32email: [email protected]: www.pme.be

BoSnia, cRoatia, heRZegovina, MaceDonia, MontenegRo & SeRBiaTOP TeH PreDSTAVnISTVOSutjeska 7, 21314 nestin-Backa PalankaSrbijaMr. Petar Preradovictel: +381 21 769 040Fax: +381 21 769 038Mobile: +381 64 20 70 826Website: www.topteh.siemail: [email protected]

cZech RepuBLicA.M. SPOL SrOSladovnicka 167, 463 11 LiberecLibor Hosic - Directortel: +420 482 750 037Fax: +420 485 163 999email: [email protected]

DenMaRKAnDerTeCH PLASTTeKnIK A/SBakkegaardsvej 406 BDK-3050 HummlebaekKen Mark, Account Manager tel: 45-4915 0400Fax: 45-4915 0401email: [email protected]

FinLanDBOwTeC OyAlakartanonkuja 1A602360 espoo, FinlandMr Pontus westerbergtel: +358 4 585 50 202email: [email protected] Website: www.bowtec.fi/

FRanceMArTIPLAST S.r.L z.A. Des LavoursMartignat, 01100, FranceHervé Carlod - PDGtel: 33 -74 81 13 20Fax: 33-74 81 10 12email: [email protected]

FILM InDUSTry SPeCIALISTPronix, 83, Boulevard BerthierParis, 75017, FranceMr. Christophe Chemeltel: + 33 1 44 29 79 79Fax: + 33 1 44 29 79 70email: [email protected]

geRManyDIGICOLOr GMBHeckendorfer Strasse, 125aD-33 609 BielefeldMr. Hans Jürgen Haintel: 49-521 972520Fax: 49-521 74446email: [email protected]

LABOTeK DeUTSCHLAnD GMBHMathildenstr. 16D-42105 wuppertal, Germanytel: +49 202 74 75 85 - 0Fax: +49 202 74 75 85 - 11email: [email protected] Website: www.labotek-de.com

gReeceOrBIT POLyMerS SA14, Pentelis AvenueVrilissia, Athens, 152 35GreeceMr Atha Triantafilloutel: + 30 210 68 37 097Fax: + 30 210 68 28 882email: [email protected]

GreeCe Film extrusion SpecialistMP eXTrUDerSTatoiou 118 MetamorfosiAthens, GreeceContact Mr Dimitris Kotsopoulostel: +302102817901Fax: +302102817901email: [email protected]: www.mpextruders.com

hungaRyBüCHLer GeSMBHwipfingerstrasse 233433 Königstetten, HungaryMr. Csaba Jozantel: +43 2273 21 77 0Fax: +43 2273 21 77 22email: [email protected]: www.buechler.at

noRWaySCAn POLyMer ASniels Leuchsvej 99, nO-1359 eiksmarkanorwayKlaus LienteL: +47 67 16 21 84FaX: +47 67 14 30 44email: [email protected]: www.maguire.com

poLanDMUeHSAM-eLeKTrOMeCH341 Patriotów Street, 04-760 warsaw, PolandPiotr Lubachtel: +48 22 517 30 40Fax: +48 22 517 30 54Mobile: +48 505 128 998email: [email protected]

RuSSiarIVerDALe COLOr rUnevsky Pr. 22-24191186, Saint-Petersburg, russiaAlexander Grigoryevtel: +7 812 949 87 14Fax: +7 812 497 22 53email: [email protected]: grigoryev_alexwebsite: www.riverdalecolor.ru IBC SySTeMSKuskovskaya str. 20A, off. 611A111141 Moscow, russianebojsa Mrkaljevic - General Managertel: +7 495 727 05 28Fax: +7 495 727 05 29email: [email protected]: www.ibcplastic.ru

SLovaKiaA.M.SK, SPOL. S r.O.Pri Dynamitke 7, 831 03 BratislavaMr. Tomas Matuskatel: +421 905 349 777Fax: +421 2 4463 8827email: [email protected]

SLoveniaTOP TeH D.O.O.Cesta Toneta Kralja 261290 Grosuplje, Slovenijatel: +386 1 787 16 61Fax: +386 1 787 16 62Website: www.topteh.siemail: [email protected]

SpainALIMATIC SLC/ Andorra 19B,19C08830 Sant Boi de LlobregatBarcelona, SpainAlex revoltos - Sales Directortel: + 34 936 525 680Fax: +34 93 652 56 86email: [email protected]: www.alimatic.com

SWeDenLABOTeK nOrDIC ABnorra Industrigatan 1Se-274 30 SkurupSwedenJonas Svenssontel: +46 411 401 55Fax: +46 411 401 56email: [email protected]: www.laboteknordic.se

SWitZeRLanDTHOMAPLAST GMBHBoesch 416331 HuenenbergSwitzerlandcontacts: Josef Thoma and Stefan Imhoftel: 0041 41 784 41 20Fax: 0041 41 784 41 21email: [email protected]: www.thomaplast.ch

tuRKeyPLASTTeKnIK ITHALAT IHrACAT LTD STIBayar Caddesi, Sitma Pinar Sokak,Tara Apt. no:9/3 34742, Kozyatagi-Kadikoy-Istanbul,TUrKeytel: +90 216 380 99 92Fax: +90 216 380 99 93email: [email protected]

uKRaineIBC SySTeMSMarini raskovoy str. 19,2902002 Kiev, Ukrainetel: +38 044 2049648Fax: +38 044 5411213email: [email protected]: www.ibcplastic.ru

uniteD KingDoMSUMMIT SySTeMS LTDVanguard, Tame ParkTamworth, StaffordshireB77 5Dy United KingdomMike Jordan - MDtel: 44-1827-265-800Fax: 44-1827-265-801Website: www.summitsystems.co.ukemail: [email protected]

EUROPE

x

mailto:info%40maguire-europe.com?subject=






5yeArwArrAnTy


✓




nOrth america

sOuth america

eurOpe

africa

asia

middle east

key tO lOcatiOns


l Maguire Branches

l Maguire Partners

i

MIDDLE EaST

x

hEaD OFFIcE


PaRTnERS

iSRaeLFLOrMAHabanai St. no. 5Industrial Area Gil-Amal, MagdielHod Hasharon 45100IsraelDaniel Florenthaltel: +972 9 7442921Fax: +972 9 7442920email: [email protected], [email protected]: www.florma.co.il

LeBanonACIS-PLASTIC TeCHnOLOGIeSLebanon BranchMr George Valassidistel: +966 1 206 4804Fax: +966 1 206 4875Mobile: +966 5 449 1764email: [email protected]

SauDi aRaBiaACIS - ArABIAn COMMerCIAL & InDUSTrIAL SerVICeSKanoo Building, 2nd FloorKind Abdul Aziz StreetriyadhKingdom of Saudi ArabiaMr George Valassidistel: +966 1 206 4804Fax: +966 1 206 4875email: [email protected]

SyRiaenG. SAMIr AL KHOUryACIS-Plastic TechnologiesSafitaTartousSyriatel: +963 43 521 104Fax: +963 43 524 039Mobile: +963 93 575 123email: [email protected]

uaePOLyMATIOn MIDDLe eAST & AFrICA FzCPO Box 16111, ras Al Khaimah, UAeed Fitzgeraldtel: +971 720 76672 Fax: +971 720 41010 email: [email protected]: www.poly-mation.com










5yeArwArrAnTy


✓




nOrth america

sOuth america

eurOpe

africa

asia

middle east

key tO lOcatiOns


l Maguire Branches

l Maguire Partners

i

aFRIca

x

hEaD OFFIcE


egypt, ghana, ivoRy coaSt, MoRocco, nigeRia MAGUIre eUrOPe Tame ParkTamworth, StaffordshireB77 5Dy United KingdomChris Crittenden - Marketing Directortel: 44-1827-265-800Fax: 44-1827-265-801Website: www.maguire.comemail: [email protected]

PaRTnERS

South aFRica

JohanneSBuRgHeSTICO (PTy) LTD94-96, 10th roadKew 2090PO Box 1985, Bramley 2018Johannesburgrepublic of South AfricaJuanita Stiehler Britstel: +27 11 786 5228Fax: +27 11 885 1693email: [email protected]

DuRBanHeSTICO (PTy) LTDUnit 3, 5 Dudley StreetJacobs, 4052PO Box 12773Durbanrepublic of South AfricaMr Harald rannertel: +27 31 467 0414Fax: +27 31 467 0410email: [email protected]

cape toWnHeSTICO CAPe (PTy) LTDUnit 10, Freeway ParkCorner Berkerley & Upper Camp StreetPO Box 410, Maitland 7405Cape Townrepublic of South AfricaMr Jochem Greinertel: + 27 21 510 8322Fax: + 27 21 511 4706email: [email protected]

KenyaPOLyMATIOn eAABC Place, 3rd Floor,waiyaki waywestlands, nairobiKenyatel: +254 204443621-24Fax: +254 2044436-25

tanZaniaPOLyMATIOn eAABC Place, 3rd Floor,waiyaki waywestlands, nairobiKenyatel: +254 204443621-24Fax: +254 2044436-25

uganDaPOLyMATIOn eAABC Place, 3rd Floor,waiyaki waywestlands, nairobiKenyatel: +254 204443621-24Fax: +254 2044436-25

eithiopiaPOLyMATIOn eAABC Place, 3rd Floor,waiyaki waywestlands, nairobiKenyatel: +254 204443621-24Fax: +254 2044436-25










5yeArwArrAnTy


✓




nOrth america

sOuth america

eurOpe

africa

asia

middle east

key tO lOcatiOns


l Maguire Branches

l Maguire Partners

i

hEaD OFFIcE

Maguire asia15 Changi north Street 1#01-15, I-LoftsSingapore, 498765Tel: (+65) 6848-7117Fax: (+65) 6542-8577email: [email protected]

www.maguire.com

MagUIRE OFFIcES

BangLaDeSh, caMBoDia, MaLaySia, MyanMaR, nepaL, paKiStan & phiLippineSMAGUIre PrODUCTS ASIA PTe LTD15 Changi north Street 1#01-15, I-LoftsSingapore 498765Contact: Mr Hubert nerlichManaging Directortel: +65 6848 7117 ext 11Fax: +65 6542 8577email: [email protected]: www.maguire.com

PaRTnERS

auStRaLia & neW ZeaLanDFLeMInG PLASTICS DynAMICS PTy LTD.20/32 roseberry StreetPO Box 638Balgowlah nSw 2093Tim Fleming - Managing Directortel: 1300 730 736Fax: 1300 730 739email contacts:new South wales: [email protected]: [email protected]: [email protected] Australia: [email protected] Australia: [email protected]: www.fleming.net.au

chinaMAGUIre PrODUCTS SHAnGHAI CO LTD7-C02 Majesty Building138 Pu Dong AvenueShanghai 200120 People’s republic of ChinaContact: Marshall Guotel: +86 21 5882 3410Fax: +86 21 5882 3420 email: [email protected]

MAGUIre PrODUCTS SHAnGHAI CO LTDroom 1170,Century Tea TradeCenter A2, no.10 Maliandao,Xuanwu District, Beijing,100055People’s republic of Chinatel: +86 10 6332 2756Fax: +86 10 6332 2756email: [email protected]

MAGUIre PrODUCTS SHAnGHAI CO LTDroom 2706, Gao ya PavilionAthen Gardenno. 152 Lin He zhong roadTianhe DistrictGuangzhou 510610People’s republic of Chinatel: +86 20 3893 4030 Fax: +86 20 3878 0166 email: [email protected]

MAGUIre PrODUCTS SHAnGHAI CO LTDA-317, #3 Buildingno.1388 Bin He road Suzhou Jiangsu 215000People’s republic of Chinatel: 86-512-6802-0561 Fax: 86-512-6802-0562 email: [email protected]

inDiaUnIMArKA-157, 3rd Cross1st Stage, Peenya Industrial estateBenGALUrU 560 058BangaloreIndiaContact: Mr y r Anand, Partnertel: +91-80-2837-6044Fax: +91-80-2837-0614email: [email protected]: www.unimark.in

UnIMArK201, Vikrant Industrial estateOpposite Victory Flask, GovandiMumbai 400 088IndiaContact: Mr y r Anand, Partnertel: +91 22 2550 6712Fax: +91 22 2550 6713email: [email protected]: www.unimark.in

SRi LanKa API TrADeS (PVT) LTD56 Dharmapala Mawatha Colombo 7 Sri Lanka Contact: Mr Anil Dissanayake tel: +94 11 257 3028 Fax: +94 11 257 4178 email: [email protected]

inDoneSiaPT BILPLAST GrAPInDOApartmen Istana Harmoni Lt 1 Blok 2U Komplek Harmoni Plaza Jl Suryopranoto no 2 Jakarta Pusat 10130 Indonesia Contact: Mr Billy Tjang, Director tel: +62-21-630-5835 Fax: +62-21-6386-0154 email: [email protected]: www.bilplast.com

JapanSAnKO SHOJI LTDShin Shibakawa Bldg 4-11, 3-Chome, Doshomachi Chuo-Ku, Osaka 541-0045 Japan Contact: Mr yuichi Kimura, General Managertel: +81 6 6203 2831 Fax: +81 6 6227 1105 email: [email protected]: www.sankojapan.co.jp

KoReaInnO TrADInG COB-1202 Daewoo Techno Park 187-7 Dodang-dong wonmi-ku, Bucheon-shi, 420-806 Korea Contact: Mrs Jay ChoiGeneral Managertel: +82 32 670 8284 Fax: +82 32 670 8984 email: [email protected]: www.innotrd.com

MaLaySiaSingapoRe heaD oFFice +nTL PLASTeCHno. 43 Jalan Apollo U5/190, Bandar Pinggiran Subang, Section U5,40150 Shah Alam, Selangor, MalaysiaContact: Mr wong Mun wai, Technical & Sales Managertel: +60 12 375 5599 Fax: +60 3 7781 4550 email: [email protected]

neW ZeaLanDFLeMInG PLASTICS DynAMICS PTy LTD.20/32 roseberry StreetPO Box 638Balgowlah nSw 2093Tim Fleming - Managing Directortel: 1300 730 736Fax: 1300 730 739email contacts:new South wales: [email protected]: [email protected]: [email protected] Australia: [email protected] Australia: [email protected]: www.fleming.net.au

phiLippineSSingapoRe heaD oFFice +CrISwILL InTernATIOnAL TrADInGBroadway International Plaza 1232 United nations Avenue Paco, Manila 1007 Philippines Contact: Mr wilson Lei, Presidenttel: +632 521 7334 / +632 526 3739Fax: +632 338 2669 / +632 536 8405email: [email protected]: www.criswill.ph

taiWanULTrACHeM COrPOrATIOn2F, n0. Lane 1, Chung Cheng roadPan Chiao City, Taipei 220TaiwanS. F. Houng - Presidenttel: 8862-896-5888-98Fax: 8862-299-6608-94email: [email protected]

LUXUrIAnCe-TeCH CO LTDno 38, Lane 89, Sec 3 Taichung Port rd Xitun District Taichung City 407 Taiwan Contact: Mr Lee wei-Chen, General Managertel: 886 4 2358 8038 Fax: 886 4 2358 7917 email: [email protected]: www.luxuriance-tech.com.tw

thaiLanDAUTOMATIC InDUSTrIAL TeCHnOLOGy CO LTD1465 Moo 6, Karnchanapisek roadBangkae-nue, Bangkae Bangkok 10160 Thailand Contact: Mr Suweerawat Chairoj Managing Director tel: +66 2 454 8708-10, Fax: +66 2 454 8711 email: [email protected]: www.autoindtech.co.th

vietnaMM-Lee InTernATIOnAL110 yen The Street, ward 2Tan Binh District, Ho Chi Minh CityVietnamContact: Mark L Murphy, Directortel: +84 8 3508 8820Fax: +84 8 3547 1988Mobile: 84 90 260 1928 email: [email protected]: www.mleei.com

aSIa

x

mailto:magasia%40maguire-products.com.sg?subject=

mailto:magasia%40maguire-products.com.sg?subject=


materials drying product guide

Documents