masoneilan specification data 28000 series varipak control … valve/dresser... · 2015-01-16 ·...

Precise Microflow Valveswith Compact Design

and Flexible Capabilities

Masoneilan®

28000 SeriesVaripak® Control Valves

Specification Data

CH 4500

09/03

CH 4500 E - 09/0328000 Varipak Control Valves

2

Numbering System ................................................... 2Features .................................................................... 3Micro-Flow Control Innovation .................................. 4General Data ............................................................ 5Materials of Construction .......................................... 6 & 7Standard Flangeless Varipak .................................... 8Standard Flanged Varipak ........................................ 9Varilog® Anti-cavitation Varipak .................................. 10High Pressure Varipak .............................................. 11Bellows Seal Varipak ................................................ 12Cryogenic Varipak ..................................................... 13Accessories and Options .......................................... 14Standard Actuator Options ........................................ 15Masoneilan Direct Sales Offices ................................ 16

Table of Contents

Numbering System

Particulars contained in this publication are for generalinformation only and Masoneilan reserves the right to modifythe contents without prior notice. No warranty either expressedor implied is either given or intended.

1st Digit

22nd Digit

Actuatortype

27 Air-to-Close28 Air-to-Open

1st Digit

22nd Digit

83rd Digit 4th Digit 5th Digit Suffix

Bodyseries

28

Actuator mountingposition

0 Undefined1 (*) (**)2 (**)34

* Standard actuator mounting arrangement

** Flanged valvemounting positionsFace-to-face =102 mm (4.02’’)

Trim MaximumN° Cv

0 3.81 2.32 1.23 0.64 0.255 0.106 0.0507 0.0258 0.0109 0.004

Constructionoption

StandardA Angle

BS Bellows sealEB CryogenicHP High pressureMS Anti-cavitationSP Special

Fig. 1 : Actuator Mounting Positions

AdjustableCv

0 Undefined1 Without2 With


3

Designed specifically for low flow applications,the Masoneilan 28000 Series Varipak providesexcellent throttling control performance with awide range of options and capabilities. Designoptimization has also resulted in an extremelyintegrated and compact assembly. Key designfeatures include :

Heavy Top-GuidingRugged valve plug support is provided along theentire stroke length using an integrated plugguide and seat ring. This ensures excellent plugstability and control even under high pressuredrop conditions. Heavy guiding is critical forcontrolling vibration damage, providingdependable control and seating performance,and minimizing trim mechanical wear.

Application Flexibility Ten standard contoured trim designs areavailable providing flexible application using thesame body platform. This helps to eliminate theeffects of valve oversizing and improves controlloop performance resulting in higher processefficiency.

Adjustable CvIn addition to multiple standard trim sets, theVaripak is also available with an adjustable Cvoption. This feature allows users to easilyincrease or decrease the Cv setting in order toaccommodate changing operating conditions.Adjustment is achieved by simply setting a knobwithin the actuator assembly (see page 4 fordetails).

Compact AssemblyMaximum space savings is provided by theVaripak assembly through modular design andforce amplification actuator technology. Theactuator also includes a low profile top-mountedhandwheel option.

Anti-Cavitation TrimVaripak is also available with an effective highpressure liquid letdown anti-cavitation trimsolution - the Varilog® trim. This unique designincludes a multi-stage axial flow plug and liner,which provides dirt tolerant operation and highwear resistance.

Design FlexibilityOther standard configurations include a HighPressure ANSI Class 2500 design, a zeroemissions Bellows Seal design, and a design forcryogenic applications. The Varipak is alsoavailable with an angle body design toaccommodate existing piping configurations.

Ease of MaintenanceVaripak's simple top-entry body constructionincludes an integrated body and bonnet design,which allows for easy access and removal of thequick change trim. The integral liner and seatring also reduces components and simplifiesassembly and disassembly. Modularity of theactuator design further enhances maintainabilityof this unique valve assembly.

Features

Fig. 2 : Varipak Family


4

VariPak is far superior to conventional microflowvalves in that it provides the user with a very widerange of nominal Cv ranges from 0.0016 to 3.8,using only eight plugs and five seats.

Micro-Flow Control Innovation

Optimized Cv Characteristics

Precise Cv Calibration and Selection

Fig. 3 : Flow Coefficient Adjustment

Trim

No.

9

8

7

6

5

4

3

2

1

0

Min

0.0016

0.004

0.010

0.020

0.04

0.10

0.25

0.5

0.9

1.5

0.0020

0.005

0.013

0.025

0.05

0.13

0.30

0.6

1.1

1.9

0.0024

0.006

0.016

0.030

0.06

0.16

0.35

0.7

1.3

2.3

Risk-free (3)

0.0028

0.007

0.019

0.035

0.07

0.19

0.40

0.8

1.5

2.6

0.0032

0.008

0.021

0.040

0.08

0.21

0.45

0.9

1.7

2.9

0.0036

0.009

0.023

0.045

0.09

0.23

Max

0.0040

0.010

0.025

0.050

0.10

0.25

With adjustable Cv function

0.50

1.0

1.9

3.2

0.55

1.1

2.1

3.5

0.60

1.2

2.3

3.8

0.85

0.85

0.85

0.85

0.85

0.90

0.90

0.92

0.92

0.92

CriticalFlow factor FL

Flow coefficient Cv

Withoutadjustable Cv

function

0.0040

0.010

0.025

0.050

0.10

0.25

0.60

1.2

2.3

3.8

15 mm(1/2’’)

•••••••••

20 mm(3/4’’)

••••••••••

25 mm(1’’)

••••••••••(2) (1)

Valve Sizes

(1) : Flangeless, flanged or threaded connections.(2) : Flangeless connections.(3) : The "Risk-free" setting allows for easy valve capacity adjustments in the field to meet changing service conditions.

Cv and FL


5

General Data

Body

Type : globe style with angle style optionSizes : 1" (DN 25) standard

1/2" (DN 15) and 3/4" (DN 20) optionalMaterials : Standard : type 316L st. st.

Optional : Monel®, Hastelloy® C, Alloy 20, othersOptions : • Flanged valve

• Anti-cavitation Varilog®

• High pressure• Bellows seal• Cryogenic• Angle valve• NACE version

Trim

Plug type : contoured, heavy top guided,multistaged anticavitation (Varilog)

Seat type : metal seatCv ratio : 500/1 at max. Cv

200/1 at min. CvFlow characteristics : linear (trim No. 0 to 5)

modified linear (trim No. 6 to 9)Flow direction : flow-to-open

Actuator

Type : spring-opposed rolling diaphragmAction : direct or reverse, easily performed without additional partsCv adjustment : optional adjustable knob / leverHandwheel : optional top mountedAir connection : 1/8" NPT

Temperature Range / Seat Leakage

Valve type

Standard and High Pressure valves

Cryogenic valves

Varilog anti-cavitation valves

Temperature range (1)

-196°C to +343°C (-320°F to +650°F)

-270°C to +150°C (-455°F to +300°F)

-29°C to +343°C (-20°F to +650°F)

IV V

Seat Class (2)

(1) : Please consult Masoneilan for applications outside the temperature range.(2) : Class IV seat leakage is standard and Class V is optional. Seat leakage class ratings per IEC 534-4 and ANSI/FCI 70-2.

Ratings / End Connections**

(*) : Available with maximum rating of ANSI Class 600 / ISO PN 100.(**) : Please consult Masoneilan for applications requiring ANSI Class 2500 / ISO PN 420 rating.

Inches

1/2

3/4

1

mm

15

20

25

2.3

2.3

3.8

Flangeless

••(*)

•

Threaded

•••

SW

•••

BW

•

FlangedFace-to-face : 160 mm (6.3’’)

•••

FlangedFace-to-face : 102 mm (4’’)

•••

ANSI Class 150-600ISO PN 20-100

ANSI Class 150-1500ISO PN 20-250Valve sizes

MaximumCv


6

Materials of Construction

15

14

13

11

9

10

7

6

8

3

2

1

12

5

4

Fig. 4 : Cut-away View


7

Materials of Construction

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Part Name

Body

Seat

Plug

Seat Ring Gasket

Seat Ring Retainer

Packing

Packing Follower

Packing Spacer

Packing Flange

Packing Flange Studs

Packing Flange Nuts

Safety Pin

Cv Adjustment Knob

Actuator Cover

Handwheel (optional)

Standard Materials (optional materials)

316L st. st. ASTM A182 Gr. F 316L (forging)

316L st. st. ASTM A351 Gr. CF3M (casting)

Optional : Monel®, Hastelloy® C, Alloy 20

17-4 PH st. st. ASTM A564 Gr. 630 Condition H900(Max. Cv ≥ 0.10, trims No. 0 to 5)

Solid Stellite® No. 6 (Max. Cv ≤ 0.05, trims No. 6 to 9)

Optional : 440C st. st., Monel®, Hastelloy® C, Alloy 20

Solid Stellite® No. 6 (Max. Cv ≥ 0.10, trims No. 0 to 5)

Solid Stellite® No. 12 (Max.Cv ≤ 0.05, trims No. 6 to 9)

Optional : 440C st. st., Monel®, Hastelloy® C, Alloy 20

Grafoil® with 316 st. st. inserts

17-4 PH st. st. ASTM A564 Gr. 630 Condition H1075

Kevlar® PTFE (standard up to ASME Class 1500)

Lattyflon® (with optional Viton® O-rings)

303 st. st. ASTM A582 TY 303

316 st. st. ASTM A479 TY 316

304 st. st. AISI 304

304 st. st. ASTM A193 Gr. B8

304 st. st. ASTM A193 Gr. 8

316 st. st. ASTM A479 TY 316

Stainless steel

Polycarbonate

Optional : stainless steel

Lexan® + austenitic st. st.

* Other materials suitable for corrosive fluids and NACE Specification are available on request.** Materials noted throughout text are for reference only. Masoneilan reserves the right to supply trade name material

or equivalent.

Materials*(standard construction**)

Temperature Range -196°C(-320°F)

+343°C(+650°F)

+232°C(+450°F)

Material not applicable

Ref.No.


8

Standard Flangeless Varipak - 28000 Series

The standard flangeless Varipak valve is widely usedin all industries. This can be attributed to the overallcompactness and simplicity of the flangelessconstruction, and the wide application range of thestainless steel body design.

• Numbering system : see page 2.• General data : see page 5.• Materials : standard construction, see page 7.• Accessories and options : see page 14.

Provide a removal clearance of 140 mm (5.5 inches)

Standard Varipak (stainless steel) Bar stock body (for non-castable material)

Fig. 5 : Standard Flangeless Varipak

Dimensions - mm (inches)


Rated Cv Range / Weight

7 kg(15.4 lbs)

3.8 to 0.0040(trim No. 0 to 9)

Rated Cv rangeBody / actuator assembly weight

1/2’’ NPT3/4’’ NPT Optional1’’ NPT

2 holes tapped5/16’’ - 18 UNC

depth 11 (7/16’’)

)

105(4.13)

260(10.24)

33(1.30)

102(4.02) 217.5

(8.56)

282(11.10)

325(12.80)

28(1.10)

45(1.77)


9

Standard Flanged Varipak - 28000 Series

Fig. 6 : Standard Flanged Varipak

The Varipak is also available in flangedconfigurations with connections and ratings asindicated in the table below.

• Numbering system : see page 2.• General data : see page 5.• Materials : standard construction, see page 7.• Accessories and options : see page 14.





depth 11 (7/16’’)

Flange Ratings / Weight

102 mm (4’’)

160 mm (6.3’’)

ANSI Class 150-600ISO PN 20-100

(raised face only)

ANSI Class 150-1500ISO PN 20-250DIN PN 10-250

(RF, FF, RTS, etc...)

8 to 10 kg(17.4 to 22 lbs)

10 to 12 kg(22 to 26.5 lbs)

3.8 to 0.0040(trim No. 0 to 9)

Rated Cv rangeFlange ratings Body / actuator S/A weight *Face-to-face dimensions

* depending on rating.

105(4.13)

260(10.24)

160(6.30)

217.5(8.56)

282(11.10)

325(12.80)

102(4.02)


Standard Varipak (stainless steel) Bar stock body (for non-castable material)





depth 11 (7/16’’)

)

105(4.13)

260(10.24)

33(1.30)

102(4.02) 217.5

(8.56)

282(11.10)

325(12.80)

28(1.10)

45(1.77)


10

Varilog® Anti-Cavitation Varipak - 28000 MS Series

The Varilog multi-stage trim design providesunmatched anticavitation performance in low flowapplications.

It minimizes erosion and vibrations, which typicallyleads to failure in conventional single-seated valves.The Varilog trim is available with the standard Varipakbody designs in either the flanged or flangelessconfigurations.

• Numbering system : see page 2.• General data : see page 5.• Accessories and options : see page 14.• Materials : see chart below.

Fig. 7 : Varilog Trim Subassembly

Specific Characteristics

0.60 to 0.050(trim No. 3 to 6) ≥ 0.98 -29°C to +350°C

(-20°F to +660°F)

MaterialsCritical flow factorFL

TemperaturerangeRated Cv range

Seat

Plug

Other parts

ASTM A 564 Gr. 630 Condition H900Type 17-4 PH st. st.

One part from solid stellite No. 12or ASTM A 276 type 440 C st. st.

Standard construction : see page 7




1/2’’ NPT3/4’’ NPT Optional

1’’ NPT


depth 11 (7/16’’)

1/4’’ NPTSupply Connection

1/4’’ NPTInstrument Connection

mm152025

inches1/23/41

mm80

102

inches3.15

4.02

Valve Sizes X

105(4.13)

260(10.24)

28(1.10)

162(6.38)

217.5(8.56)

282(11.10)

325(12.80)

57(2.24)


11

High Pressure Varipak - 28000 HP Series

Fig. 8 : High Pressure Varipak

Where very high upstream pressure occurs or wherethe pressure drop exceeds the pressure rating of thestandard body (see page 8), a high pressure Varipak isthe recommended choice.



0.60 to 0.0040(trim No. 3 to 9)

ANSI Class 2500ISO PN 420 Class IV

MaterialsBody rating Seat leakageRated Cv range

ASTM A 182 Gr. F 316LOptional : ASTM A182 Gr. F 316

Standard construction : see page 7

Body

Other parts

Note : Please consult Masoneilan for further information.



Handwheel(optional)



depth 11 (7/16’’)

)

105(4.13)

260(10.24)

33(1.30)

102(4.02) 217.5

(8.56)

282(11.10)

325(12.80)

Fig. 9b : Plug and bellows subassembly


12

Bellows Seal Varipak - 28000 BS Series

A version of the Varipak with bellows seal is availablefor applications requiring zero leakage at the packingbox.This type of valve is often needed for applicationsinvolving the handling of flammable, toxic or explosivefluids.


Fig. 9a : Bellows Seal Varipak


2.3 to 0.0040(trim No. 1 to 9)

ANSI Class 150-600ISO PN 20-100 Class IV

55 bar at +100°C(800 psi at +212°F)40 bar at +200°C(580 psi at +392°F)

MaterialsBody rating Seat leakageRated Cv range

ASTM A 182 Gr. F 316LOptional : A182 Gr. F 316

Plug and seat : standard materialsBellows assembly : 316L St. St.

Viton® O-ringsStandard construction : see page 7

Body

Plug / bellowssubassembly

Other parts

Operatingpressures

Fig. 10 : CryogenicVaripak


Dimensions - mm (inches)Handwheel(optional)


depth 11 (7/16’’)

1/4’’ NPTSupplyConnection

1/4’’ NPTInstrumentConnection


3.8 to 0.10(trim No. 0 to 5)

-270°C to + 150°C(-455°F to +300°F)

ANSI Class 150-600 ISO PN 20-100

excepted trim No. 0 :ANSI Class 150-300

ISO PN 20-50

Class IV

MaterialsTemperaturerange Body ratingRated Cv range

ASTM A 182 Gr. F 316LStandard material

Trim No. 0 : standard materialTrim No. 1 to 5 : ASTM A 564 Gr. 630Condition H900 Type 17-4 PH. St. St.

PTFEStandard construction : see page 7

Body and extensionPlug / stem

Seat

O-ring seat gasketOther parts

Seat leakage

105(4.13)

260(10.24)

33(1.30)

399(15.71)

217.5(8.56)

519(20.43)

562(22.13)

57(2.24)

102(4.02)


13

Cryogenic Varipak - 28000 EB Series

Simplified maintenanceThe cryogenic Varipak meets the requirements ofcryogenic processes requiring thermal insulation. An‘insulating interface’ sets up between the valve body(‘cold zone’) and the body extension located in thehigher temperature area (‘warm zone’). The valve bodyassembly and its thermal extension are positionedinside the ‘cold box’. The plug can be easily removedand inspected without disturbing the valve body. Thisprecludes any preliminary, complicated dismounting,and more importantly, prevents interfering in any waywith the ‘cold box’.

BodyThe valve body, manufactured from a material suitable forlow temperatures, maintains ductility in service. It can beconveniently mounted to suit any specific piping needs.However, arrangements must be made so that the anglebetween the valve axis and vertical does not exceed 60°.

The bonnet is located away from the cryogenic fluid,which means that the body gasket is not inside the coldzone. This design prevents any leakage of the cryogeninto the insulated zone.

Body extensionThe body extension and coupling sleeve are thin-walled metal tubes so as to minimize the inflow of heatby conduction. The annular space is reduced in orderto exclude any convection currents.

PlugThe design of the plug allows the working parts to beperfectly centered in relation to the seat and providesa uniform temperature zone for the guiding.



14

Accessories and Options

Pneumatic positioner (model 7700P) Electropneumatic positioner (model 7700E)

Type : pneumatic, force balanceMounting : built-in bracket in actuatorAction : direct : increasing instrument

signal increases air outputCharacteristics : linearInstrument signal : 200 to 1000, 400 to 2050

or 200 to 1850 mbar(3 to 15, 6 to 30 or 3 to 27 psi)200 to 600 and 600 to 1000 mbar(3 to 9, and 9 to 15 psi)split range

Connections : 1/4’’ NPT instrumentand supply - 1/8’’ NPT output

Average airconsumption : 0.26 Nm3/h at 2.1 bar supply

(0.15 scfm at 30 psi supply)Max. air output : 7 Nm3/h (4.20 scfm)Supply pressureeffect : 0.07% of full stroke variation

per 100 mbar supply pressure change (0.05% per psi)

Open loop gain : 70Linearity : ± 0.5%Sensitivity : 0.1%Repeatability : 0.1%Full stroke time : less than one secondWeight : 1.5 kg (3.3 lbs)

Other Accessories

Proximity sensors and limit switchesDigital positioners - HART® and Fieldbus FoundationHandwheel, airsets and solenoid valves

Fig. 11 : Model 7700P Pneumatic Positioner

Type : electropneumatic, force balanceMounting : compact, without external linkage

to the actuator.Action : direct : increasing instrument

signal increases air outputCharacteristics : linearInstrument signal : 4-20 mAAir connections : 1/4’’ NPT supply - 1/8’’ NPT outputAverage airconsumption : 0.4 Nm3/h (0.24 scfm)Electricalconnections : 1/2’’ NPT or M20Weight : 3.5 kg (7.7 lbs)

Hazardous Location Protection

ATEX Approvals (94/9/EC Directive) ExplosionproofNo. SIRA 02 ATEX 1274Intrinsic SafetyNo. SIRA 02 ATEX 2277 X

FM (Factory Mutual) ApprovalsExplosionproofIntrinsic Safety Non-incendive and Dust-ignitionproof

CSA Approvals (Canadian Standards Association)ExplosionproofIntrinsic Safety Non-incendive

Fig. 12 : Model 7700E Electropneumatic Positioner


15

Standard Actuator Options

Fig. 16 : Adjustable Cv Actuator

Fig. 13 : Non Adjustable Cv Actuator

Fig. 15 : Varipak with 7700EElectropneumatic Positioner

Fig. 14 : Varipak with Non-AdjustableCv Actuator (cover removed)

MasoneilanDirect Sales

Offices

CL

D+

33 (

0)1

60 9

4 00

17

- w

ww

.cld

.fr

© 2003 All rights reserved

www.masonei lan.com

BELGIUMDresser Valves Europe 281-283 Chaussée de Bruxelles, 1190 BrusselsTelephone + 32.2.3440970Fax + 32.2.3441123

BRAZILDresser Industria e Comercio Ltda.Rua Senador Vergueiro, 43309521-320 Sao Caetano Do Sul, Sao PauloTelephone + 55.11.453.5511Fax + 55.11.453.5565

CANADAOntarioDresser - Masoneilan - DI Canada Inc.5010 North Service Road, Burlington, Ontario L7L 5R5Telephone + 1.905.335.3529Fax + 1.905.336.7628

AlbertaDresser - Masoneilan - DI Canada Inc.Suite 1300, 311-6th Ave., S.W., Calgary, Alberta T2P 3H2Telephone + 1.403.290.0001Fax + 1.403.290.1526

CHINADresserSuite 2403, Capital Mansion, 6 Xinyuannan Rd.Chao Yang District, Beijing 100040Telephone + 86.10.64661164Fax + 86.10.64660195

FRANCEDresser Produits Industriels S.A.S.4, Place de Saverne, 92971 Paris la Défense CedexTelephone + 33.1.49.04.90.00Fax + 33.1.49.04.90.10

Dresser Produits Industriels S.A.S.55, rue de la Mouche, 69540 Irigny (Lyon)Telephone + 33.4.72.39.06.29Fax + 33.4.72.39.21.93

GERMANYDresser Valves Europe GmbHHeiligenstrasse 75, 41751 Viersen (Dülken)Telephone + 49.2162.81.700Fax + 49.2162.81.70.200

Dresser Valves Europe GmbHUhlandstrasse 58, 60314 FrankfurtTelephone + 49.69.439350Fax + 49.69.4970802

INDIADresser Valve India Pvt. Ltd.305/306 "Midas" Sahar Plaza, Mathurdas Vasanji RoadJ.B. Nagar, Andheri East, Mumbai - 400059Telephone + 91.22.28351134Fax + 91.22.28354791

Dresser Valve India Pvt. Ltd.205, Mohta Building, 4, Bhikaiji Cama PlaceNew Delhi - 110066Telephone + 91.11.26164175Fax + 91.11.26165618

ITALYDresser Italia S.r.l. - Masoneilan DivisionVia Cassano, 77 - 80020 Casavatore, NaplesTelephone + 39.081.7892111Fax + 39.081.7892208

JAPANNiigata Masoneilan CO. Ltd.20th Floor, Marive East Tower, WBG 2-6 Nakase,Mihama-Ku, Chiba-shi, Chiba 261-7120Telephone + 81.43.2979222Fax + 81.43.2991115

KOREADresser Korea Inc.2107 Kuk Dong Building60-1, 3Ka, Choongmu-ro Chung-Ku,Seoul, 100705Telephone + 82.2.274.0792Fax + 82.2.274.0794

KUWAITDresserMiddle East Operations,10th Floor, Al-Rashed Complex,Fahad Salem Street,P.O. Box 242, Safat, 13003Telephone + 965.9061157Fax + 965.3718590

MALAYSIADresser Flow Solutions Business Suite, 19A-9-1, Level 9,UOA Centre, n° 19, Jalan Pinang,50450 Kuala Lumpur, West MalaysiaTelephone + 60.3.2163.2322Fax + 60.3.2163.6312

MEXICODresser Valve de Mexico, S.A. de C.V.Henry Ford n° 114, Esq. Fulton,Fracc. Industrial San Nicolas, 54030 Tlalnepantla,Estado de MexicoTelephone + 52.5.310.9863Fax + 52.5.310.5584

THE NETHERLANDSDresser Valves Europe Steenhouwerstraat 11, 3194 AG, HoogvlietMailing address : P.O. Box 640,NL3190 AN Hoogvliet RTTelephone + 31.10.438.4122Fax + 31.10.438.4443

NIGERIADresser Flow Solutions Plot 293, Akin Olugbade Street Victoria Island, Logos, Nigeria Telephone + 234.1.555.4229 Fax + 234.1.555.7969

RUSSIADS Controls61, Nekhinskaya Street,Veliky Novgorod 173021Telephone + 7.8162.157898Fax + 7.8162.157921

SAUDI ARABIADresser Al Rushaid Valve & Instrument CO.P.O. Box 10145 - Jubail Industrial City 31961Telephone + 966.3.341.0278Fax + 966.3.341.0696

SINGAPOREDresser Singapore Pte Ltd.16, Tuas Avenue 8 - Singapore 639231Telephone + 65.6.861.6100Fax + 65.6.861.7172

SOUTH AFRICADresser Ltd., South Africa BranchP.O. Box 2234, 16 Edendale Road Eastleigh,Edenvale 1610Telephone + 27.11.452.1550Fax + 27.11.452.6542

SPAINMasoneilan S.A.C/Murcia 39 C, 08030 Sant Boi de Llobregat,BarcelonaTelephone + 34.93.652.6430Fax + 34.93.661.6444

UNITED ARAB EMIRATESDresser - Middle East OperationsP.O. Box 61302, Roundabout 8,Units JAO1 & JAO2Jebel Ali Free Zone, DubaiTelephone + 971.4.8838.752Fax + 971.4.8838.038

UNITED KINGDOMDI UK Ltd.Trevithick Works Gillibrands Estate,Skelmersdale, Lancashire WN8 9TUTelephone + 44.1695.52600Fax + 44.1695.52662

DI UK Ltd.Unit 4, Suite 1.1, Nobel House,Grand Union Office Park, Packet Boat Lane, Uxbridge, Middlesex UB8 2GHTelephone + 44.1895.454900Fax + 44.1895.454919

UNITED STATESNorthern RegionDresser - Masoneilan85 Bodwell StreetAvon, MA 02322-1190Telephone + 1.508.586.4600Fax + 1.508.427.8971

Southern RegionDresser - Masoneilan2135 Highway 6 SouthHouston, TX 77077Telephone + 1.281.496.8100Toll Free + 1.800.847.1099Fax + 1.281.596.4222

South Texas OperationsDresser - Masoneilan4841 Leopard StreetCorpus Christi, TX 78408-2621Telephone + 1.361.877.2414Fax + 1.361.584.1196

Masoneilan AftermarketSales & Service Center16030 Bear Bayou DriveChannelview, TX 77530Telephone + 1.281.862.1500Fax + 1.281.862.1550

Western RegionDresser - Masoneilan2950 East Birch StreetBrea, CA 92821Telephone + 1.714.572.1528Fax + 1.714.572.1463

masoneilan specification data 28000 series varipak control … valve/dresser... · 2015-01-16 ·...

Documents