Non - Conforming Product

Mark GoodsellDirector - Manufacturing

RAAF Fairbairn 2003 Infinity and Olsent Cable 2013

USB Charger 2014 Lacrosse Fire 2014

92% face an NCP problem

Ai Group NCP Report 2013

Half face NCP penetration between 11% and 50%

Ai Group NCP Report 2013

43% face but don’t report an NCP problem

Ai Group NCP Report 2013

?

Australian Industry Group

Airconditioning & Mechanical Contactors Assn

Amorphous Silica Assn of Aust

Ash Development Assn of Aust

Australian Constructors Assn

Australian Steel Institute

Australian Institute of Architects

Australian Glass & Glazing Assn

Cement Concrete & Aggregates Aust

Australian Institute of BuildingSurveyorsAustralian Window Association

Building Products Innovation CouncilBureau of Steel Manufacturers of Aust

Concrete Masonry Assn of Aust

Consult Australia

Consumer Electronics Suppliers Assn

Engineered Wood Products Assn of Aust

Engineers Australia

Facility Management Assn of Aust

Fire Protection Assn of Aust

Galvanizers Assn of Aust

Housing Industry Assn

Insulation Council of Australasia

Insulation Australasia

Insulated Panel Council of A&NZ

Lighting Council Australia

National Association of Steel Framed Housing

National Electrical and Communications Assn

National Fire Industry Assn

National Precast Concrete Assn of Aust

Plastics Industry Pipe Assn of Aust

Plumbing Products Industry Group

Property Council of Aust

Roofing Tile Assn of Aust

Steel Reinforcement Institute of Aust

Think Brick Australia

Vinyl Council of Australia

causes

• confusion over responsibilities of regulators and

insufficient knowledge of the conformance framework

• inadequate surveillance, audit checks, testing,

enforcement and first party certification

• responsibility on building certifiers from conformance

framework and inadequate clarity of their role

• overemphasis on regulatory controls at the point of

installation

reactions • competitor testing

• third party accreditation schemes driven by industry

• industry/consumer awareness campaigns

• Senate inquiry – interim report May 2016

• Building Ministers Forum (and its Senior Officers Group)

• Victorian Building Authority audit of Melb cladding

Non - Conforming Product

Mark GoodsellDirector - Manufacturing