marine · pdf filea division of remmel enterprises, inc. truss gangways tred design truss...

A DIVISION OF

REMMEL ENTERPRISES, INC.

ALUMINUM DOCK ROLLER

MARINE GANGWAYS 1831 WEST E STREET

LaPorte, TX 77571

TEL (281) 470-7200 FAX (281) 470-7202

www.marinegangways.com

“Manufactured with your people in mind.”

TRUSS GANGWAYS WITH ROPE

AND ALUMINUM HANDRAILS 20

TO 70 FEET LONG

BEAM GANGWAYS WITH

ROPE HANDRAILS

BEAM GANGWAYS WITH

ALUMINUM 1” PIPE

HANDRAILS

BULWARK LADDERS

4 & 5 STEP

NEW V TREAD DESIGN

PRODUCT INDEX (Hold CTRL then click)

HUTRUSS GANGWAYS

HUBEAM GANGWAYSU

HUWHEEL KITS AND

ACCESSORIES U

HUBULWARK & CUSTOM

LADDERSU

HUNEW V TREAD DESIGN U

HUGANGWAY SPECS AND

SIZES

HUQUALITY ASSURANCE U

HUEURO-TREAD REPACEMENT U

HUREPAIRSU

HUSPECIALUH HPROJECTS

HSPECIAL PLATFORM DESIGN

WHEEL KITS

A DIVISION OF


TRUSS GANGWAYS

Truss Style Gangways

All welded aluminum

Available with flat floor with aluminum cleats as an option or new V-

Tred design

Slip resistant gravel paint

Galvanized or aluminum lifting bar and/or lifting lugs

Dock roller or wheels

Gunwale Clip

Gunnel Hook and Chain Retainer

Yoke Assembly Devise

Toe Plate

Poly-Rope or Aluminum handrails

Available up to 70 feet with 24” walk area width

A DIVISION OF


BEAM GANGWAYS

Beam Style Gangways

All aluminum construction

Decking is available in dimple “Traction Tread” or slip resistant gravel

paint.

Poly-Rope, 3/16’’ Long Link Chain S.S or Aluminum Pipe handrails

placed in speed rail fittings for ease of removal and repair.

8” Hard Phenolic wheels or aluminum dock roller

Lifting bar or lifting lugs

Gunnel Hook and Chain Retainer

Yoke Assembly Devise

Gunwale clip

Available with cleats or new V-TREAD with gravel paint.

ROPE HANDRAILS ALUMINUM PIPE HANDRAILS

1’’ or 1 ¼’’

A DIVISION OF


DIFFERENT WHEEL KITS

AND ACCESSORIES ARE

AVAILABLE

Wheel Kits

8” Phenolic wheels with self-lubricating

Delrin bearings; Swivel wheels available. 5’’4’’ & 3’’ Aluminum Dock Rollers

Grip Strut is available on some units. Replacement treads for old Euro-style treads.

Traction Tread

V-Tred Design

A DIVISION OF


Gunnel Hook & Chain Retainer

Lifting Lug

Tie off Lug

Lifting Sling

Yoke Assembly

Pier Edge or Flat

Toe Plate

Cleats

Paint & Gravel

Lifting Lug

Tie off Lug Lifting Sling

A DIVISION OF


BULWARK LADDERS

BULWARK LADDERS

All welded aluminum construction

Widths from 24” to 36”

Grip strut stair treads 10” on center

Handrails placed 42” above top step

Rubber foot pads for sure footing

Heights beginning at 32” for a three tread, 42” for a four tread, 52”

for a five tread etc.

ALSO AVAILABLE ARE CUSTOM ALUMINUM AND GALVANIZED

STEEL PLATFORMS BUILT TO YOUR SPECS.

BULWARK LADDER

CUSTOM LADDERS & PLATFORMS

A DIVISION OF


NEW! V-TRED DESIGN

V-TREDS

Are designed to replace cleats, All V-TRED surfaces

are painted with slip resistant gravel paint.

V-TREDS

Allow safe walking conditions from a flat surface up

to an incline of 45 degrees and still remain safe even

in bad weather.

A DIVISION OF


GANGWAY SPECS AND

SIZES

ALL BEAM TYPE GANGWAYS ARE AVAILABLE WITH:

ROPE HANDRAILS WITH ALUMINUM PIPE UPRIGHTS SECURED IN SPEED-RAIL

BASE FITTINGS FOR EASE OF REMOVAL AND REPAIR.

1” ALUMINUM PIPE HAND-RAILS SECURED IN SPEED-RAIL FITTINGS FOR EASE OF

REMOVAL AND REPAIR.

1-1/4” ALUMINUM PIPE HANDRAILS AVAILABLE ON SPECIAL ORDER.

8” DOCK WHEELS ON ONE END FOR EASE OF HANDLING.

GUNWALE CLIP ON ONE END TO GRAB ONTO THE VESSEL’S GUNWALE FOR

SECURING ONE END OF THE GANGWAY TO THE VESSEL.

CLEATS OR 1-1/4” X 1-1/4” ALUMINUM ANGLE WELDED ACROSS THE GANGWAY

ON APPROXIMATELY 18” CENTERS FOR SURE FOOTING ON A STEEP INCLINE.

NEW V-TREAD DESIGN FOR MAXIMUM FOOTING UP TO A 45 DEGREE INCLINES

WITH COVERED WITH SLIP RESISTANT GRAVEL PAINT.

SLIP RESISTANT GRAVEL PAINT AS AN OPTION.

LIFTING BAR OR LUGS FOR EASE OF LIFTING THE GANGWAY ONTO THE VESSEL

WITH A DAVIT OR CRANE.

STANDARD BEAM SIZES AVAILABLE:

THREE MAN GANGWAY RATED AT 750 LBS. CENTER LOAD

WIDTHS IN 24” AND OTHER CUSTOM SIZES

STANDARD LENGTHS: 10 FEET, 12 FEET, 16 FEET 20 FEET, 24 FEET ARE STOCK

ITEMS

CUSTOM LENGTHS ARE AVAILABLE.

NOTE: BECAUSE OF LENGTH AND STABILITY, IT IS RECOMMENDED THAT ALL

GANGWAYS OVER 30 FEET LONG SHOULD BE TRUSS TYPE GANGWAYS.

ALL TRUSS TYPE GANGWAYS ARE AVAILABLE WITH:

ROPE HANDRAILS WITH ALUMINUM PIPE UPRIGHTS SECURED IN SPEED-RAIL

BASE FITTINGS FOR EASE OF REMOVAL AND REPAIR.

1” ALUMINUM PIPE HAND-RAILS SECURED IN SPEED-RAIL FITTINGS FOR EASE OF

REMOVAL AND REPAIR.

1-1/4” ALUMINUM PIPE HANDRAILS AVAILABLE ON SPECIAL ORDER.

3’’ 4’’&5’’ ALUMINUM DOCK ROLLER THE FULL INSIDE WIDTH OF THE GANGWAY.

GUNWALE CLIP ON ONE END TO GRAB ONTO THE VESSEL’S GUNWALE FOR

SECURING ONE END OF THE GANGWAY TO THE VESSEL.

OPTIONS ON EACH GANGWAY ARE CLEATS OR 1-1/4” X 1-1/4” ALUMINUM ANGLE

WELDED ACROSS THE GANGWAY ON APPROXIMATELY 18” CENTERS FOR SURE

FOOTING ON A STEEP INCLINE AND SLIP RESISTANT GRAVEL PAINT.

A DIVISION OF


NEW V-TREAD DESIGN FOR MAXIMUM FOOTING UP TO A 45 DEGREE INCLINES

WITH SLIP RESISTANT GRAVEL PAINT.

EURO-TREADS ARE AVAILABLE AS A SPECIAL ORDER.

LIFTING LUGS OR LIFTING BAR FOR EASE OF LIFTING THE GANGWAY ONTO THE

VESSEL WITH A DAVIT OR CRANE.

YOKE ASSMEBLY DEVISE FLAT OR PIER EDGE MOUNT

GUNNEL HOOKS AND CHAIN RETAINERS

STANDARD TRUSS SIZES AVAILABLE:

WIDTHS IN 24”, 30”, AND 36” “TRACTION TREAD” WALKWAY WIDTHS

STANDARD LENGTHS: 10 FEET, TO 70 FEET.

CUSTOM LENGTHS ARE AVAILABLE.

DEPENDING ON WORK LOADS, ALLOW 4- 6 WEEKS DELIVERY

LONGER GANGWAYS ARE BOLTED TOGETHER IN TWO PARTS FOR EASE OF

GROUND TRANSPORTATION.

ALL BULWARK LADDERS ARE AVAILABLE WITH:

ALL WELDED ALUMINUM CONSTRUCTION

GRIP STRUT STAIR TREADS FOR SURE FOOTING IN ROUGH WEATHER.

RUBBER BASE PADS FOR NON-SLIP GRIP TO THE DECK.

GUNWALE CUT-OUTS TO LASH UNIT TO THE GUNWALE OR OTHER SUPPORT.

TOP STEP IS WIDER THAN THE OTHER STAIR TREADS FOR EASE OF STANDING.

TOP HANDRAILS ARE 42” ABOVE THE LAST STEP/PLATFORM TO COMPLY WITH

OSHA.

STANDARD BULWARK LADDER SIZES AVAILABLE:

STANDARD STOCKED WIDTH IS 24” AND 28’’. CUSTOM WIDTHS ARE AVAILABLE

UP TO 36”.

STANDARD HEIGHT IS A 4 TREAD OR 42” HIGH AND 5 TREAD OR 52” HIGH AND

ARE STOCK ITEMS.

CUSTOM HEIGHTS ARE AVAILABLE. JUST ADD 10” PER TREAD HEIGHT.

SPECIAL ORDER UNITS HAVE BEEN CONSTRUCTED UP TO 15’-0” HIGH.

A DIVISION OF


QUALITY ASSURANCE This is our simple NO B.S. policy:

If you do not like our equipment and we cannot satisfy you

within 30 days, Marine Gangways will take back the

equipment and refund the full purchase price! (Freight Charges and special orders are not included)

All of MARINE GANGWAYS’ products are guaranteed to satisfy

the most discriminating customer. Each product is short arc welded by a

certified welder, not a robotic machine. Attention is paid to detail and

function to operated under the most stressful and inclement conditions.

MARINE GANGWAYS are on ships and barge docks all over the

world. We understand that anything to do with the marine industry is

physically and mentally challenging, so we manufacture our gangways

and other products with inclement weather and people in mind.

HANDRAILS IN KEE KLAMP RAIL

FITTINGS

MARINE GANGWAYS’ handrails are placed in fittings so that the

customer can replace damaged sections, not the entire welded handrail.

See pictures below.

TOP TEE

MIDDLE CROSS

BASE WALL SOCKET

A DIVISION OF


REPLACE YOUR OLD EUROPEAN TREAD DESIGN WITH

THE NEW EURO-TREADS

STANDARD WIDTHS FROM 24” TO 30”

OLD EUROPEAN TREADS

NEW EURO- TREADS

SIDE VIEW

SIDE VIEW

COMPARE THE SHAPE!

OLD EUROPEAN TREADS

NOW! EURO-TREADS MADE IN

THE USA

A DIVISION OF


REPAIR THOSE TIRED OLD

GANGWAYS!!!

According to the US Coast Guard and OSHA, all marine gangways

must be “in good repair and safe condition”. If your gangways are

not in good repair and safe condition let us repair them. We have

an expert staff with over 20 years combine experience in repairing

gangways that are damaged and in poor condition.

BEFORE

AFTER

A DIVISION OF


SPECIAL PROJECTS

Long Return Handrails,

Gunnel Hook & Chain Retainer

Handrails with S. S.

Chain and Removable

Stanchions

A DIVISION OF


A DIVISION OF


Cantilever Gangway

Tip out

Pilot Ladder

Flip Plate

Custom Gunwale Clip

Viewing Stand

A DIVISION OF


SPECIAL PLATFORM DESIGN

marine · pdf filea division of remmel enterprises, inc. truss gangways tred design truss...

Documents