manufacturing and materials joining innovation center (ma jic) · 2019. 12. 15. · meeting kickoff...
TRANSCRIPT
Page 1 of 4
Tuesday, June 25th Optional Meetings See separate agenda
Whitaker Lab 3rd Floor Conference Room 5 E. Packer Ave, Bethlehem, PA 18015
9AM-6:00PM
Welcome Reception & Networking Join the Ma2JIC crew for a grill out reception, all guests are welcome!
Lehigh University, Rauch Business Center/Tamerler Courtyard 621 Taylor St, Bethlehem, PA 18015
See maps/parking instructions for details 6:00-8:00PM
Day 1: Wednesday, June 26th Iacocca Conference Center-Wood Dining Room, Lehigh University-Mountaintop Campus
111 Research Drive , Bethlehem, PA 18015
7:00-8:00am Breakfast & Registration All attendees are asked to sign in and will receive an agenda Non-members will be required to sign a “Non-disclosure agreement”
8:00-8:15am Welcome & Introduction John DuPont, Lehigh University Site Director
8:15-8:35am Keynote Dr. Richard Sause, Director Advanced Technology for Large Structural Systems (ATLSS) Engineering Research Center
8:35-8:50am Meeting Kickoff & Annual Update Jorge Penso, Industry Advisory Board Vice-Chair Antonio Ramirez, Center Director
8:50-8:55am Group Photo
Agenda for the June 2019 IAB Meeting of the NSF I/UCRC:
Manufacturing and Materials Joining
Innovation Center (Ma2JIC) June 26-27th
Iacocca Conference Center-Wood Dining Room
Lehigh University-Mountaintop Campus 111 Research Drive
Bethlehem, PA 18015 WIFI: lehigh-guest (open)
Page 2 of 4
9:00-9:20am IUCRC Program Review-Video Prakash Balan, NSF Division of Industrial Innovation & Partnerships (ENG/IIP), Acting IUCRC Program Manager
9:20-9:25am Overview of LIFE form feedback process Craig Scott, NSF Assessment Coordinator
9:25-9:30am Student Award Criteria Review Adam Rowe, Stress Engineering
Modeling
9:30-9:45am
Modeling Cross Cutting Thrust Update Chair: Adam Hope, Thermocalc; Co-Chair Zhenzhen Yu, CSM Modeling focused presentations are integrated in to the thrust area presentations
Materials/Weldability
9:45-11:00am
Thrust Committee Presentation (10 Minutes) Chair: Darren Barborak, AZZ/WSI; Co-Chair Carolin Fink, OSU
Student Presenters: 15 minute presentation + 5 minute Q&A Alejandro Alvarez, OSU, 08-OSU-062017, “Welding of Externally Clad X65 Pipes for Pre-Salt Subsea Oil Applications (Phase II)” William Farrell, UTK, 44-UTK-072016, “Metal Polymer Composite Joining” Jim Rule, OSU, 03-OSU-2016“Criterion for Dissimilar Metal Welds for Service in Hydrogen Containing Environments”
Poster Session
11:00-11:30am Materials/Weldability
Lunch & Hot Topics
11:30am-12:45pm
Buffet lunch in the general meeting room. Presentations will start promptly at 12:00pm
Oak Ridge National Lab Manufacturing Demonstration Facility & IUCRC Project Collaboration Update Suresh Babu, UTK/ORNL & Dr. Steven Shooter, Fellow of Science and Technology Policy, Advanced Manufacturing Office, US Dept. of Energy
Material/Joint Performance
12:45-2:15pm
Thrust Committee Presentation (10 Minutes) Chair: Mike Buehner, Technip FMC; Co-Chair Boian Alexandrov, OSU
Student Presenters: 15 minute presentation + 5 minute Q&A Sebastian Romo, OSU, 03-OSU-032019, Exploration and Development of New Technologies for Coke Drum Fabrication and Repair Ally Fraser, LU, 18-OSU/LU-012017, Effect of Interstitial Elements in the Weldability of Nickel Alloys (Modeling Focus) 7 minute presentation + 3 minute Q&A Jonah Duch, LU, 01-LU-012018, Stress Relation Cracking Phase II Boeing Smith, OSU, 06-OSU-062017, Developing the Relationship between Microhardness, Instrumented Indentation, and Impact Toughness Jiarui Kang, OSU, 01-OSU-082018, Effect of Niobium on Weld Metal Toughness
Poster Session
2:15-2:45pm Material/Joint Performance Refreshments to be served
Page 3 of 4
Additive Manufacturing/Process Development/Control
2:45-4:15pm
Thrust Committee Presentation (10 Minutes) Chair: Dan Javernick, Los Alamos National Laboratory; Co-Chair Bill Hamel, UTK
Student Presenters: 15 minute presentation + 5 minute Q&A Ethan Sullivan, CSM, 04-CSM-012018, “Al-based Metal Matrix Composite Tubular Wires for Additive Manufacturing Deposition” Eric Brizes, OSU, 13-OSU-102017, “Multiscale Characterization and Modeling for Hybrid Joining of Dissimilar Material Combinations for the Transportation Industry” (Modeling Focus)
7 minute presentation + 3 minute Q&A Josh Penny & Logan McNeil, UTK, 02-UTK-012019, “Large Scale Additive Manufacturing Using Non-Gravity Aligned GMAW (LSAMM-NGA)” Bryan Lara, OSU, 03-OSU-082018, “Exploration of Additive Manufacturing Technology to Improve Material Joining for the Transportation Industry” Tim Babyak, OSU, 06-OSU-012016, “Corrosion Resistant Weld Overlays for Pipelines, Oil and Gas, and Petrochemical Installations” Sam Robertson, UTK, 01-UTK-012910, “Adaptive Welding for Power Plant Piping and Pressure Vessels (AW-PPV)”
LIFE Form
4:15-4:30pm LIFE Form Feedback Day 1 Craig Scott, NSF Assessment Coordinator
Poster Session
4:30-5:00pm Additive Manufacturing/Process Development/Control
Dinner & Networking
Fegley’s Bethlehem Brew Works
559 Main Street Suite 101 Bethlehem, PA 18018
Across from the Hyatt Place Hotel
6:00-9:00pm
Dinner, Networking & Trivia Buffet dinner and cash bar at Bethlehem Brew Works. Be on the lookout for trivia team assignments (no stacking your team beforehand!) 6:00PM Dinner is served 6:30PM Trivia starts (90 minutes)
Page 4 of 4
Day 2: Thursday June 27th Iacocca Conference Center-Wood Dining Room, Lehigh University-Mountaintop Campus
111 Research Drive , Bethlehem, PA 18015
7:00-8:00am Breakfast & Registration All attendees are asked to sign in both days Non-members will be required to sign a non-disclosure agreement
8:00-8:10am Morning Kickoff & Recap Jorge Penso John DuPont
8:10-8:30am Presentation of Student Awards Adam Rowe, Stress Engineering
8:30-8:45am Affiliated Site Updates Todd Palmer, Penn State
8:45-9:15am
Proposal Presentations New Proposals (15 minutes including Q&A) Additional Phase Proposals & Extensions (10 minutes including Q&A) Dr. Antonio Ramirez, 01-OSU-062019, Friction Stir Welding for Armor Materials –Phase II Dr. Stephen Liu, 02-CSM-062019, Laser Welding Behavior of Additive Manufactured 304L Stainless Steel- Phase II
9:15-9:45am IUCRC Phase III Preparation Report Antonio Ramirez
9:45-10:15am Required NSF Survey Completion Session & LIFE Form Review Survey is for Industry Members & Faculty Only Craig Scott, Assessment Coordinator
Student Laboratory Tour & Activity
10am-11am Advanced Technology for Large
Structural Systems (ATLSS) Meet with Lehigh student
leaders for logistics
10:15-10:30am Break & Leg Stretch
10:30-11:30am IAB – Closed Door
Meeting PI Meeting Room C002
Lunch
11:30-1:00pm
Buffet lunch in the general meeting room. Presentations will start promptly at 12pm.
1. Dr. Xuesong Gao, Post-Doctoral Scholar, OSU, “Simulation of Thermal and Flow Related Phenomenon in SLM Additive Manufacturing”
2. Dr. Rafael Giorjao, Post-Doctoral Scholar, OSU, “Material flow during friction stir welding of an AZ31B alloy with threaded and unthreaded pin geometries using numerical simulation”
Joint IAB/PI Meeting
1:00-2:00pm Discuss outcomes of IAB & PI meetings and action items
2:00-3:00pm ORNL Manufacturing Demonstration Facility & Ma2JIC Collaboration Discuss next steps, potential projects and collaboration.
3:00-3:15pm Closing Remarks
Page 1 of 2
Updated 6/20/2019
Optional Meetings Manufacturing & Materials Joining Innovation Center (Ma2JIC)
The below are optional meetings for attendees related to specific projects or research topics, which
are open to everyone. Attendees interested in these meetings should reach out to the specified
contact person directly to RSVP and for additional information.
Tuesday June 25th, 2019 All meetings June 25th will take place at Lehigh University’s
Whitaker Lab 3rd Floor Conference Room
5 E Packer Ave, Bethlehem, PA 18015
Stress Relaxation Cracking
Contact: Boian Alexandrov
Time: 8:00-9:00am
Call in Information: Meeting number (access code): 624 381 876 Meeting password: 347H
By WebEx Link, or Phone 1-650-479-3207 Call-in toll number (US/Canada)
Temperbead Welding
Contact: Boian Alexandrov
Time: 9:00-11:00am
Call in Information: Meeting number (access code): 292 513 490 Meeting password: 625F22
By WebEx Link, or Phone 1-650-479-3207 Call-in toll number (US/Canada)
DMW Projects (DMW Criterion, Characterization of DMWs, Welding of internally clad
X65 pipes)
Contact: Boian Alexandrov
Time: 11:00am-12:30pm
Call in Information: Meeting number (access code): 295 446 837 Meeting password: 625X65
By WebEx Link, or Phone 1-650-479-3207 Call-in toll number (US/Canada)
Coke Drum
Contact: Antonio Ramirez
Time: 12:30-1:30 pm
Welding of Hyper Duplex Stainless Steels
Contact: Antonio Ramirez
Time: 4:00-5:00 pm
Thrust Committee Chair & Co-Chair Meeting
Meeting of thrust committee Chairs and Co-Chairs (all welcome) to discuss structure and
responsibilities, including future road mapping/goal setting exercises.
Contact: Brooke Felts
Time: 5:00-6:00pm
Page 2 of 2
Updated 6/20/2019
Grill Out & Reception
Join the Ma2JIC crew for a grill out reception, all attendees are welcome!
Location: Lehigh University, Rauch Business Center/Tamerler Courtyard, 621 Taylor St,
Bethlehem, PA 18015
Time: 6:00-8:00pm
6/26-6/27 MeetingPark in Yellow
MEETING INFORMATION IACOCCA HALL / WOOD DINING HALL
111 RESEARCH DR, LEHIGH UNIVERSITY, BETHLEHEM, PA 18015
LOCATION Iacocca Hall, Wood Dining Hall
111 Research Dr, Bethlehem, PA 18015 • Guests can enter Iacocca Hall
from the Western side of the
building. After entering, Wood
Dining Hall is to the left and up
one floor.
PARKING
• There is visitor parking near
the South side of Iacocca Hall.
• The parking meter fee is $1/
hour and it accepts quarters,
dimes, and nickels. Or you
can pay using the Passport
Mobile App.
• Note: The Hyatt offers a
shuttle for free, but if you
prefer to drive yourself please
refer to the maps shown.
June 2019 Ma2JIC IAB Meeting
Lehigh University
June 26th-27
th
Entering Iacocca Hall to Wood Dining Hall
Please contact Brooke Felts, Ma2JIC Center Manager,
with questions.
Cell: 513-316-1216
E-mail: [email protected]
Iacocca Hall
Hotel
Enter here and turn
left to get to Wood
Dining Hall
GRILL OUT INFORMATION RAUCH BUSINESS CENTER / TAMERLER COURTYARD
621 TAYLOR ST, LEHIGH UNIVERSITY, BETHLEHEM, PA 18015
LOCATION Rauch Business Center, Tamerler Courtyard
621 Taylor St, Bethlehem, PA 18015
• Tamerler Courtyard is located
outside and in between Rauch
Business Center and Zoellner
Arts Center.
PARKING
• There is a visitor parking garage
attached to the Zoellner Arts
Center.
• Zoellner Arts Center Garage is
open everyday from 6am-11pm,
and the charge is $1/hour.
• Accepted forms of payment are
Visa, MasterCard and Discover.
Or you can pay using the
Passport Mobile App.
Ma2JIC Pre-Meeting Grill Out
Lehigh University
June 25th
Entering Tamerler Courtyard
Please contact Brooke Felts, Ma2JIC Center Manager,
with questions.
Cell: 513-316-1216
Rauch Business Cen-
Hotel
Tamerler
Courtyard
Parking
Please contact Brooke Felts, Ma2JIC Center Manager,
with questions.
Cell: 513-316-1216
E-mail: [email protected]
PRE-MEETING INFORMATION WHITAKER LAB. 3RD & 4TH FLOOR CONFERENCE ROOMS
5 E PACKER AVE, LEHIGH UNIVERSITY, BETHLEHEM, PA 18015
LOCATION Whitaker Lab.,3rd & 4th Floor Conference Rooms
5 E Packer Ave, Bethlehem, PA 18015
• Guests can enter Whitaker
Laboratory from East Packer
Avenue or Asa Drive.
• Note: Entering from East
Packer Avenue puts you on the
3rd floor, and entering from Asa
Drive puts you on the 1st floor.
PARKING
• It is recommended that you
park at the meters outside the
building on Webster or East
Packer Ave.
• Parking meters are enforced
Mon.-Sat. 8am-9pm, and they
accept coins or credit cards.
• There is also a visitor parking
garage at the Zoellner Arts
Center (420 E Packer Ave).
June 2019 Ma2JIC IAB Pre-Meeting
Lehigh University
June 25th
Entering Whitaker Laboratory
Hotel
Whitaker Lab.
Enter here from Asa
Drive. You will be
on the 1st floor.
Enter here from E
Packer Ave. You will
be on the 3rd floor.
Please contact Brooke Felts, Ma2JIC Center Manager,
with questions.
Cell: 513-316-1216
E-mail: [email protected]
MEETING INFORMATION FEGLEY’S BETHLEHEM BREW WORKS
559 MAIN ST #101, BETHLEHEM, PA 18018
LOCATION Fegley’s Bethlehem Brew Works 559 Main St #101, Bethlehem, PA 18018
• From the Hyatt, turn left
onto Guetter St.
• Turn right onto W Broad
St.
• Turn left onto Maint St.
• Fegley’s Bethlehem
Brew Works will be on
the right.
Ma2JIC Dinner & Networking
Lehigh University
June 26th
Hotel
Fegley’s Bethlehem
Brew Works
Fegley’s Bethlehem Brew Works
Please contact Brooke Felts, Ma2JIC Center Manager,
with questions.
Cell: 513-316-1216
E-mail: [email protected]
June 2019 Ma2JIC Meeting Shuttle Schedule
Shuttle Departs from the Bethlehem Hyatt for hotel guests For additional shuttle needs (7am-11pm) please contact the hotel directly 610-625-0500
Tuesday June 25th
6:00pm *to be confirmed
Depart Hyatt Lehigh Campus for Welcome Reception
Tuesday June 25th
7:40pm Depart Lehigh Campus Welcome Reception Hyatt
8:00pm
Wednesday June 26th
7:00am
Depart Hyatt Lehigh Mountaintop Campus for Meeting 7:20am
7:40am
Wednesday June 26th
5:00pm Depart Lehigh Mountaintop Campus Hyatt
5:20pm
Thursday June 27th
7:00am
Depart Hyatt Lehigh Mountaintop Campus for Meeting 7:20am
7:40am
Thursday June 27th
2:00pm
Depart Lehigh Mountaintop Campus Hyatt 3:15pm
3:30pm