manual ten2

8/7/2019 Manual Ten2

1/8

Ten2Ten2 EX

IMPORTANT SAFETY INSTRUCTIONS

1) Read theseinstructions.

2) Keep theseinstructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6)Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordancewith manufacturers instructions.

8) Do not install near any heat sources such as radiators, heat

registers, stoves or other apparatus (including amplifiers) thatproduce heat.

9) Do not defeat the safety purpose of the polarized orgrounding-type plug. A polarized plug has two blades with onewider than the other. A grounding type plug has two blades anda third grounding prong. The wide blade or the third prong areprovided for your safety. If the provided plug does not fit intoyour outlet, consult an electrician for replacement of theobsolete outlet.

10) Protect the power cord from being walked on pinchedparticularly at plugs, convenience receptacles, and the pointwhere they exit from the apparatus.

11) Use only attachments/accessories specified by themanufacturer.

12) Use only with the cart, stand, tripod, bracket, or tablespecified by the manufacturer, or sold with the apparatus.

13) Unplug this apparatus during lightning storms or whenunused forlong periods of time.

14) Refer all servicing to qualified service personnel. Servicingis required when the apparatus has been damaged in any way,such as power-supply cord or plug is damaged, liquid has beenspilled or objects have fallen into the apparatus, the apparatushas been exposed to rain or moisture, does not operatenormally or has been dropped.


2/8


3/8


4/8


5/8


6/8


7/8


8/8

FCC Compliance Notice

This device complies with part 15 of the FCC rules. Operationis subject to the following two conditions: (1) This device maynot cause harmful interference, and (2) this device must acceptany interference received, including interference that maycause undesired operation.

CAUTION: Changes or modifications not expressly approvedby the party responsible for compliance could void the usersauthority to operate the equipment.

NOTE: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to part 15 ofthe FCCrules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmfulinterference to radio communications. However, there is noguarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to tryto correct the interference by one or more of the followingmeasures:

--Reorient or relocate the receiving antenna.--Increase theseparation between theequipment and

receiver.

--Connect theequipment into an outlet on a circuit differentfrom that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician

forhelp.

2010 Acoustic Image LLC

TEN2TM

Model 570 AA

TEN2 EXTM

Model 571 EX

manual ten2

Documents