manual screen printer for smt solder paste
TRANSCRIPT
www.smthelp.com
1.) Install screw lever, wire clip, fixed block and couter weight lever in sequence according to the graphic presentation above.
Installation Instruction
www.smthelp.com
2.) Rotate counterweight lever while adjusting tight nut.
Installation Instruction
www.smthelp.com
Operation Instruction
1.) Put steel stencial in the wire clip, and tighten the steel stencial by its handwheel.
www.smthelp.com
Operation Instruction
2.) Put the simple DIY position on the printing table and also put the PCB accordingly. Adjust the five-star handle on the operation platform to make the holes on PCB match the holes on the steel stencil
www.smthelp.com
S1688 Stencil Cleaner Machine:
• Using range: • Steel mesh, wire mesh, copper mesh,
microporous network, scraper, fixture, PCB,
etc., can effectively lower removal from the
solder paste, such as red glue residue.
• 1.Use full pneumatic control cleaning, pneumatic logic control
• 2.Without electricity, avoid fire hazards
• 3.Can use water or solvent, safe and reliable
• 4.Totally enclosed cleaning process, to avoid direct contact
with cleaning fluid
• 5.Liquid can be recycled, save cost
• 6.Spray pressure, and the size of the diaphragm pump air
pressure is adjustable
• 7.The machine maintenance is simple, all 304 stainless steel
body, prolong life
www.smthelp.com
Welcome inquiry
1,Please visit : www.smthelp.com
2, Find us more: https://www.facebook.com/autoinsertion
3, Know more our team: https://cn.linkedin.com/in/smtsupplier
4, Welcome to our factory in Shenzhen China
5, See more machine working video, please Youtube: Auto Insertion
6, Google: Auto+insertion, to get more informations
7,Looking forward to your email: [email protected]