(manual pc k7 810s50)
TRANSCRIPT
-
8/11/2019 (Manual Pc k7 810s50)
1/38
Mainboard Users Manual
This publication, including all photographs, illustrations andsoftware, is protected under international copyright laws, with all
rights reserved. Neither this manual, nor any of the material
contained herein, may be reproduced without the express written
consent of the manufacturer.
The information in this document is subject to change without
notice. The manufacturer makes no representations or warranties
with respect to the contents hereof and specifically disclaims anyimplied warranties of merchantability or fitness for any particular
purpose. Further, the manufacturer reserves the right to revise this
publication and to make changes from time to time in the content
hereof without obligation of the manufacturer to notify any person
of such revision or changes.
Trademarks
I!, "#$, and %&'( are registered trademarks of International
usiness !achines.$!) and $thlon are registered trademarks of $dvanced !icro
)evices Inc.
Intel, %entium, %entium*II, and !!+ are registered trademarks of
Intel orporation.
!icrosoft, !&*)-& and indows /0'/1'NT'(222 are registered
trademarks of !icrosoft orporation.
%*cillin and hip$way"irus are trademarks of Trend !icro Inc.$ward is a trademark of $ward &oftware Inc.
$3) is a registered trademark of $ureal Inc.
!edia4ing Talk is a registered trademark of !edia4ing Inc.
3)eep is a registered trademark of 5*olor Inc.
-ther names used in this publication may be trademarks and are
acknowledged.
Copyright 2001
All Rights Reserved
M810 Series, V5.0
S73X!"ly 2001
-
8/11/2019 (Manual Pc k7 810s50)
2/38
Mainboard Users Manual
Notice for AGP4X Slot:This mainboard provides an optional $#%6x slot. e recommend
the user should use one of the $#% "#$ cards that we have tested.
e will test more $#% "#$ cards in the future. 7sers may get this
information from our orld ide eb at www.pcchips.com.tw.
Model Chipset Memory Manufacture
3) 8$&T54 #eForce 3(! reative T9/62
$TI %54!5)I$ ( 1! inFast 3) 8(322
#eForce (09 3(! $&7& "9922
#eForce ( !+ 3(! $&7& $#%*":;22
#eForce ( #T& ))4 3(! $&7& $#%*::22)
#eForce ( #T& ))4 3(! 58&$ #8$)I$#eForce ( #T& 3(! inFast
#eForce ( !+ 3(! inFast
!atrox %roductiva #;22 1! !atrox
!atrox !illennium #(22 1! T$#4$!
N"I)I$ #eForce (09 ))4 3(! $&7& "9122
N"I)I$ #eForce (09 3(! reative T9/:2
N"I)I$ 4I"$ TNT( "anta 3(! Top solution
4I"$ TNT( !96 ;9! %ixel"iew
4I"$ TNT ;9! inFast 3) &3(2
4I"$ TNT( 3(! $&7& $#%*"3122
4I"$ TNT( 3(! reative T91;2
Notice for AM CPU:Si#$e o"r l%&or%tory $%#'t test %ll $%tegories o( #e)ly *%de
AM+ 7 C- or (orth$o*i#g, it is possi&le th%t o"r $"rre#t
&o%rds %#d #e) C- h%ve the $o*p%ti&ility pro&le*s. /# $%se
the pro&le*s h%ppe#, ple%se i**edi%tely $o#t%$t "s or lo$%l
ve#dor.
II
-
8/11/2019 (Manual Pc k7 810s50)
3/38
Mainboard Users Manual
!able of Contents
hapter ;< Introduction...................................................................;
=ey Features...........................................................................(
%ackage ontents....................................................................0
&tatic 5lectricity %recautions..................................................9
%re*Installation Inspection......................................................9
hapter (< !ainboard Installation..................................................:
!ainboard omponents..........................................................1
I'- %orts................................................................................../
Install $ %7........................................................................../
Install !emory......................................................................;;
&etting >umper &witches.......................................................;(Install the !ainboard............................................................;3
-ptional 5xtension rackets.................................................;6Install -ther )evices............................................................;0
5xpansion &lots....................................................................;:
hapter 3< I-& &etup 7tility......................................................;/
Introduction..........................................................................;/
4unning the &etup 7tility.....................................................(2
&tandard !-& &etup %age.............................................. ...(;
$dvanced &etup %age...................................................... .....((
%ower !anagement &etup %age............................................(3
%I ' %lug and %lay &etup %age........................................... .(0
8oad -ptimal &ettings..................................................... .....(08oad est %erformance &ettings...........................................(9
Features &etup %age..............................................................(9
%7 %n% &etup %age............................................................(1
?ardware !onitor %age........................................................(/
hange %assword..................................................................(/
5xit....................................................................................... 32
hapter 6< &oftware @ $pplications.............................................3;
Introduction..........................................................................3;Installing &upport &oftware........................................... .......3;
$uto*installing under indows /1.......................................33
III
-
8/11/2019 (Manual Pc k7 810s50)
4/38
Mainboard Users Manual
I"
-
8/11/2019 (Manual Pc k7 810s50)
5/38
": #ntroduction
Chapter 1
#ntroduction
This mainboard has a So$et2processor socket for an AM+
7type %7s. Aou can install any one of these processors on the
mainboard.
The mainboard supports &ocket*69( processor front*side bus
speeds of (22'2M4.
This mainboard uses the 6irdchipset which integrates a 128&it
A- r%phi$s A$$eler%tor, and provides a optional X A-slot
for highly graphics display, C- -l"g 9 -l%ythrough firmware,
ltr% +MA 33'100function. The mainboard has a built*in
AC':7 Ch Code$, provides an AMRB$udio !odem 4iserC slot
to support $udio and !odem application, and has a built*in
10%se6100%se6X ;et)or /#ter(%$e. In addition, the
mainboard has an extended set of A6X /< -ortsincluding %&'(
keyboard and mouse ports, two 7& ports, an 4>*60 8$N port, aparallel port, one serial port, and one "#$ port. Two extra 7&
ports can be added using the 5xtended 7& !odule that connects
to the mainboard.
This mainboard has all the features you need to develop a powerful
multimedia workstation that is network ready. The board is Mi$ro
A6X sieand has power connectors for an A6Xpower supply.
;
-
8/11/2019 (Manual Pc k7 810s50)
6/38
Mainboard Users Manual
Key Features
The key features of this mainboard include7&; header on the mainboard.
(. %lug the bracket cable onto the >7&; header.
3. In the system chassis, remove a slot cover from one of the
expansion slots and install the extension bracket in the
opening. 7se the screw that held the slot cover in place to
secure the extension bracket to the chassis.
;6
JUS*1 He./er
+5V $P6* %P6+ 5
D 1Key
2 +5V3 P$*4 P$+ D$6 C
-
8/11/2019 (Manual Pc k7 810s50)
19/38
': Mainboard #nstallation
Install Ot$er 'e(ices
Install and connect any other devices in the system following the
steps below.
3loppy is$ ri7eThe mainboard ships with a floppy disk drive cable that can
support one or two drives. )rives can be 3.0 or 0.(0 wide, with
capacities of 392=, :(2=, ;.(!, ;.66!, or (.11!.
Install your drives and connect power from the system power
supply. 7se the cable provided to connect the drives to the floppydisk drive header >
-
8/11/2019 (Manual Pc k7 810s50)
20/38
Mainboard Users Manual
If you want to install more I)5 devices, you can purchase a secondI)5 cable and connect one or two devices to the &econdary I)5
channel connector /+=2on the mainboard. If you have two
devices on the cable, one must be !aster and one must be &lave.
#nternal Sound ConnectionsIf you have installed a )*4-! drive or )")*4-! drive, you
can connect the drive audio cable to the onboard sound system.-n the mainboard, locate the two 6*pin connectors C+1and C+2.
There are two kinds of connector because different brands of )*
4-! drive have different kinds of audio cable connectors.
onnect the cable to the appropriate connector.
#nfrared Port
Aou can connect an infrared port to the mainboard. Aou canpurchase this option from third*party vendors.;. 8ocate the infrared port /R1header on the mainboard.
(. If you are adding an infrared port, connect the ribbon cable
from the port to the header and then secure the port to an
appropriate place in your system chassis.
*nboard 2AN 2( ConnectionsIf you have a set indicator 85)s for the onboard 8$N
communication, you can connect the 85) cable to the header !-.
%ins ;*( are for 8ink 85). %ins 3*6 are for ;2';22 !bps mode
85), the onboard 8$N run in ;22 !bps mode when the 85) lit.
;9
CD1
CD2
I&1 He./er
$
JP6$
0eser7ed $+5V %
"08 5
2 Key3 D4 "008
-
8/11/2019 (Manual Pc k7 810s50)
21/38
': Mainboard #nstallation
E%pansion Slots
This mainboard has two 3(*bit %I expansion slots, one $!4 slot
and one optional $#% slot.
Follow the steps below to install a %I'$!4'$#% expansion card.;. 8ocate the $#%, $!4 or %I slots on the mainboard.
(. 4emove the slot cover for this slot from the system chassis.
3. Insert the expansion card edge connector into the slot and press
it firmly down into it so that it is fully inserted.
6. &ecure the expansion card bracket to the system chassis using
the screw that held the slot cover in place.
AM SlotThe $!4 B$udio !odem 4iserC slot is an industry standard slot
that allows for the installation of a special audio'modem riser card.
)ifferent territories have different regulations regarding the
specifications of a modem card. Aou can purchase an $!4 card
that is approved in your area and install it directly into the $!4
slot.
;:
PCI2
PCI1
AP1
AM&1
-
8/11/2019 (Manual Pc k7 810s50)
22/38
8: -#*S Setup Utility
Chapter 3
-#*S Setup Utility
Introduction
The I-& &etup 7tility records settings and information about
your computer such as the date and time, the kind of hardware
installed, and various configuration settings. Aour computer uses
this information to initialiDe all the components when booting up
and functions as the basis for coordination between systemcomponents.
If the &etup 7tility configuration is incorrect, it may cause the
system to malfunction. It can even stop your computer from
booting properly. If this happens, you can use the clear !-&
jumper to clear the !-& memory used to store the configuration
information, or you can hold down the -%ge pkey while you
reboot your computer. ?olding down the -%ge pkey also clears
the setup information.
Aou can run the setup utility and manually make changes to the
configuration. Aou might need to do this to configure some of the
hardware that you install on or connect to the mainboard, such as
the %7, system memory, disk drives, etc.
;/
-
8/11/2019 (Manual Pc k7 810s50)
23/38
Mainboard Users Manual
)unning t$e Setup !tility
5ach time your computer starts, before the operating system loads,
a message appears on the screen that prompts you to Jit *,-
if you !ant to run ST.. hen you see this message, press the
+eletekey and the !ain menu page of the &etup 7tility appears on
your monitor.
AM"&"#S S"MP)- S-UP U")"9 : V-0S"# $;2$;6$ "nc; All 0i=hts 0eser7ed
Standard CM#S Setup .eatures Setup
Ad7anced Setup CPU PnP Setup
Po,er Mana=e!ent Setup ?ard,are Monitor
PC" / Plu= and Play Setup Chan=e Pass,ord
)oad #pti!al Settin=s -@it
)oad &est Perfor!ance Settin=s
-SC Buit Select "te! Shift.2 Chan=e Color .5 #ld Values
.4 #pti!al 7alues .1 &est perfor!ance 7alues .$6 Sa7eE-@it
Aou can use the cursor arrow keys to highlight any of the options
on the main menu page. %ress =#terto select the highlighted
option. To leave the setup utility, press the =s$%pekey. To cyclethrough the &etup 7tilitys optional color schemes hold down the
Shi(tkey and press 2.
&ome of the options on the main menu page lead to tables of items
with installed values. In these pages, use the cursor arrow keys to
highlight the items, and then use the -gpand -g+#keys to cyclethrough the alternate values for each of the items. -ther options on
the main menu page lead to dialog boxes which reHuire you to
answer Aes or No by hitting the Bor ; keys.
If you have already made changes to the setup utility, press 10tosave those changes and exit the utility. %ress 5to reset the
changes to the original values. %ress to install the setup utilitywith a set of default values. %ress 7to install the setup utility with
a set of high*performance values.
(2
-
8/11/2019 (Manual Pc k7 810s50)
24/38
8: -#*S Setup Utility
Standard CMOS Setup Page
7se this page to set basic information such as the date, the time,
the I)5 devices, and the diskette drives. If you press the F3 key,
the system will automatically detect and configure the hard disks
on the I)5 channels.
AM"&"#S S-UP : SADA0D CM#S S-UP "nc; All 0i=hts 0eser7ed
Date !!/dd/yy ue #ct 23> 2666i!e hh/!!/ss $3245% )&A &l( P"# %2&it ype SiFe Cyln ?ead GPco! Sec Mode Mode Mode ModePri Master Auto #n
Pri Sla7e Auto #nSec Master Auto #nSec Sla7e Auto #n
.loppy Dri7e A $;33M& % $/2H
.loppy Dri7e & ot "nstalled
Month 'an : Dec (SC -@it
Day 6$ : %$ Select "te!
9ear $6$ : 26 PU0P090% Modify Shift;3' Color 38 Detect All ?DD
Date & Time Use these ite!s to set the syste! date and ti!e
Pri Master
Pri SlaveSec MasterSec Slave
Use these ite!s to confi=ure de7ices connected to
the Pri!ary and Secondary "D- channels; oconfi=ure an "D- hard dis( dri7e> chooseA+to; "f theA+tosettin= fails to find a hard dis( dri7e> set it toU$er> and then fill in the hard dis( characteristicsSiFe> Cyls> etc; !anually; "f you ha7e a CD*0#Mdri7e> select the settin= CD&OM; "f you ha7e an
AAP" de7ice ,ith re!o7able !edia e;=; a I"Pdri7e or an )S*$26 select Fo3tic.;
Floppy Drive AFloppy Drive B
Use these ite!s to set the siFe and capacity of thefloppy dis(ette dri7es installed in the syste!;
(;
-
8/11/2019 (Manual Pc k7 810s50)
25/38
Mainboard Users Manual
d(anced Setup Page
7se this page to set more advanced information about your system.
Take some care with this page. !aking changes can affect the
operation of your computer.
AM"&"#S S-UP : ADVAC-D S-UPC 2666 A!erican Me=atrends> "nc; All 0i=hts 0eser7ed
rend ChipA,ay Virus -nabledBuic( &oot -nabled$st&oot De7ice "D-*62nd&oot De7ice .loppy%rd&oot De7ice CD0#Mry #ther &oot De7ices 9esS;M;A;0;; for ?ard Dis(s Disabled
&ootUp u!*)oc( #n.loppy Dri7e S,ap Disabled.loppy Dri7e See( DisabledPass,ord Chec( Setup&oot o #S/2 J 43M& o)$ Cache -nabled)2 Cache -nabledSyste! &"#S Cacheable -nabled
-SC Buit Select "te!
.$ ?elp PU/PD/+/* Modify
.5 #ld Values Shift.2 Color
.4 )oad #pti!al 7alues
.1 )oad &est perfor!ance 7alues
Trend ChipAwayir!s
his !ainboard has built*in 7irus protection in thefir!,are; Use this ite! to enable or disable thebuilt*in 7irus protection;
"!ic# Boot "f you enable this ite!> the syste! starts up !oreuic(ly be eli!ination so!e of the po,er on test
routines;
1stBoot Device2ndBoot Device3rdBoot Device
Use these ite!s to deter!ine the de7ice order theco!puter uses to loo( for an operatin= syste! toload at start*up ti!e;
Try $ther BootDevice
"f you enable this ite!> the syste! ,ill also searchfor other boot de7ices if it fails to find an operatin=syste! fro! the first t,o locations;
S%M%A%%T% 'or(ard Dis#s
-nable this ite! if any "D- hard dis(s support theS;M;A;0;; Self*Monitorin=> Analysis and 0eportin=echnolo=y feature;
Boot)p *!m+,oc#
his ite! deter!ines if the u! )oc( (ey is acti7eor inacti7e at syste! start*up ti!e;
Floppy DriveSwap
"f you ha7e t,o dis(ette dri7es installed and you
enable this ite!> dri7e A beco!es dri7e & and dri7e& beco!es dri7e A;
((
-
8/11/2019 (Manual Pc k7 810s50)
26/38
8: -#*S Setup Utility
Floppy DriveSee#
"f you enable this ite!> your syste! ,ill chec( allfloppy dis( dri7es at start up; Disable this ite!unless you are usin= an old %46K& dri7e;
Password Chec# "f you ha7e entered a pass,ord for the syste!> usethis ite! to deter!ine> if the pass,ord is reuired toenter the Setup Utility Set+3 or reuired both atstart*up and to enter the Setup Utility Aw.$;
Boot to $S-2 ./0MB
-nable this ite! if you are bootin= the #S/2operatin= syste! and you ha7e !ore than 43M& ofsyste! !e!ory installed;
,1-,2 Cache )ea7e these ite!s enabled since all the processorsthat can be installed on this board ha7e internal)$/)2 cache !e!ory;
System B$SCacheale
"f you enable this ite!> a se=!ent of the syste!&"#S ,ill be cached to !ain !e!ory for fastere@ecution;
Po#er Management Setup Page
This page sets some of the parameters for system power
management operation.
AM"&"#S S-UP : P#G-0 MAA-M- S-UPC 2666 A!erican Me=atrends> "nc; All 0i=hts 0eser7ed
Po,er Mana=e!ent DisabledStandby i!e #ut DisabledSuspend i!e #ut DisabledDisplay i!e #ut Disabled?ard Dis( i!e #ut Disabled0in= #n Po,er #n DisabledKeyboard Po,er #n Disabled0C Alar! Po,er #n Disabled 0C Alar! Date -7ery Day 0C Alar! ?our $2 0C Alar! Minute %6 0C Alar! Second %6
-SC Buit Select "te!
.$ ?elp PU/PD/+/* Modify
.5 #ld Values Shift.2 Color
.4 )oad #pti!al 7alues
.1 )oad &est perfor!ance 7alues
Power
Manaement
Use this ite! to enable or disable a po,er
!ana=e!ent sche!e; "f you enable po,er!ana=e!ent> you can use the ite!s belo, to setthe po,er !ana=e!ent operation; &oth APM and
ACP" are supported;
(3
-
8/11/2019 (Manual Pc k7 810s50)
27/38
Mainboard Users Manual
Standy Time $!t his sets the ti!eout for Standby !ode in!inutes; "f the ti!e selected passes ,ithout anysyste! acti7ity> the co!puter ,ill enter po,er*sa7in= Standby !ode;
S!spend Time $!t his sets the ti!eout for Suspend !ode in!inutes; "f the ti!e selected passes ,ithout anysyste! acti7ity> the co!puter ,ill enter po,er*sa7in= Suspend !ode;
Display Time $!t his sets the ti!eout for display de7ice in !inutes;"f the ti!e selected passes ,ithout any displayacti7ity> the display ,ill enter po,er*sa7in= !ode;
(ard Dis# Time$!t
his sets the ti!eout for hard dis( in !inutes; "fthe ti!e selected passes ,ithout any hard dis(acti7ity> the dis( ,ill enter po,er*sa7in= !ode;
in $n Power $n he syste! can be turned off ,ith a soft,areco!!and; "f you enable this ite!> the syste! canauto!atically resu!e if there is an inco!in= callon the .a@/Mode!; 9ou !ust use an A8 po,ersupply in order to use this feature;
4eyBoard Power$n
"f you enable this ite!> you can turn the syste! onand off by pressin= hot (eys on the (eyboard; 9ou!ust enable the Keyboard Po,er #n Lu!per inorder to use this feature;
TC Alarm Power$n - Date - (o!r -Min!te - Second
he syste! can be turned off ,ith a soft,areco!!and; "f you enable this ite!> the syste! canauto!atically resu!e at a fi@ed ti!e based on thesyste!s 0C realti!e cloc(; Use the ite!s
belo, this one to set the date and ti!e of the,a(e*up alar!; 9ou !ust use an A8 po,ersupply in order to use this feature;
(6
-
8/11/2019 (Manual Pc k7 810s50)
28/38
-
8/11/2019 (Manual Pc k7 810s50)
29/38
Mainboard Users Manual
*oad &est Per+ormance Settings
If you select this item and press =#tera dialog box appears. If you
press B, and then =#ter, the &etup 7tility loads a set of best*
performance default values. These default values are Huite
demanding and your system might not function properly if you are
using slower memory chips or other low*performance components.
Features Setup Page
This page sets some of the parameters for peripheral devicesconnected to the system.
AM"&"#S S-UP : P-0"P?-0A) S-UPC 2666 A!erican Me=atrends> "nc; All 0i=hts 0eser7ed
#n&oard .DC -nabled#n&oard Serial Port %.h/C#M$#n&oard "0 Port Disabled#n&oard Parallel Port %1h Parallel Port Mode SPP Parallel Port "0B 1 Parallel Port DMA /A#n&oard a!e Port 26$h#n&oard M"D" Port %66h M"D" Port "0B $6#n&oard PC" "D- &oth
AC1 Sound -nabledAC1 Mode! Auto#n&oard )A -nabledUS& .unction Support -nabledUS& .unction for D#S Disabled
-SC Buit Select "te!
.$ ?elp PU/PD/+/* Modify
.5 #ld Values Shift.2 Color
.4 )oad #pti!al 7alues
.1 )oad &est perfor!ance 7alues
$nBoard FDC Use this ite! to enable or disable the onboardfloppy dis( dri7e interface;
$nBoard SerialPort
Use this ite! to enable or disable the onboardC#M$ serial port> and to assi=n a port address;
$nBoard r Port Use this ite! to define the protocol for an infraredport if you ha7e installed an optional "0 port; hechoices are "rDA and ASK"0;
$noard ParallelPort
Use this ite! to enable or disable the onboard)P$ parallel port> and to assi=n a port address;he Auto settin= ,ill detect and a7ailable address;
(9
-
8/11/2019 (Manual Pc k7 810s50)
30/38
8: -#*S Setup Utility
Parallel Port Mode Use this ite! to set the parallel port !ode; 9oucan select SPP Standard Parallel Port> -CP-@tended Capabilities Port> -PP -nhancedParallel Port> or -CP + -PP;
Parallel Port " Use this ite! to assi=n either "0B 5 or 1 to theparallel port;
Parallel Port DMA Use this ite! to assi=n a DMA channel to theparallel port; he options are 6> $ and %;
$nBoard 6amePort
Use this ite! to enable or disable the onboard=a!e port> and to assi=n a port address;
$nBoard MD Port Use this ite! to enable or disable the onboardM"D" port> and to assi=n a port address;
MD Port " Use this ite! to assi=n an "0B to the M"D" port;
$noard PC D7 Use this ite! to enable or disable either or both ofthe onboard Pri!ary and Secondary "D-channels;
AC89: So!nd his ite! enables or disables the onboard AC1audio chip;
AC89: Modem his ite! enables or disables the onboard AC1!ode! chip;
$nBorad ,A* his ite! enables or disables the onboard )Achip;
)SB F!nctionS!pport
-nable this ite! if you plan to use the US& portson this !ainboard;
)SB F!nction 'or
D$S
-nable this ite! if you plan to use the US& portson this !ainboard in a D#S en7iron!ent;
(:
-
8/11/2019 (Manual Pc k7 810s50)
31/38
Mainboard Users Manual
CP! PnP Setup Page
This page lets you manually configure the mainboard for the %7.
The system will automatically detect the kind of %7 that you
have installed and make the appropriate adjustments to the items
on this page.
AM"&"#S S-UP : CPU PnP S-UP "nc; All 0i=hts 0eser7ed
CPU &0AD AMD K1CPU ype AthlonCPU Speed 166 M?FCPU Core Volta=e $;166 VCPU 0atio 1;6@CPU .reuency $66 M?FD0AM .reuency $66 M?F
-SC Buit Select "te!
.$ ?elp PU/PD/+/* Modify .5 #ld Values Shift.2 Color .4 )oad #pti!al 7alues .1 )oad &est perfor!ance 7alues
CP) BA*D-Type-Core oltae-atio-Fre;!ency
hese ite!s sho, the (ind> core 7olta=e> ratio andfreuency of CPU that has installed in yoursyste!;
CP) Speed Use this ite! to set the CPU speed that hasinstalled in your syste!;
DAM Fre;!ency Use this ite! to set the freuency of D0AM thathas installed in your syste!;
;ote< If you manually set the wrong speed and the system wont
run properly, press the -%ge pkey while the system is booting
and a default setting will replace the incorrect %7 setting.
(1
-
8/11/2019 (Manual Pc k7 810s50)
32/38
8: -#*S Setup Utility
,ard#are Monitor Page
This page sets some of the parameters for the hardware monitoring
function of this mainboard.
AM"&"#S S-UP : ?A0DGA0- M#"#0C 2666 A!erican Me=atrends> "nc; All 0i=hts 0eser7ed
*** ?ard,are Monitor ***CPU e!perature %6NC/4N.Syste! e!peratureCPU .an SpeedSyste! .an SpeedVcore 2;666 VVcc257 2;566 V
Vcc% %;%66 VVcc 5;666 V+$2V $2;666 V:$2V *$2;666 VS&%V %;%66 VS&5V 5;666 VVolta=e &attery %;666 V
-SC Buit Select "te!
.$ ?elp PU/PD/+/* Modify
.5 #ld Values Shift.2 Color
.4 )oad #pti!al 7alues
.1 )oad &est perfor!ance 7alues
CP) - SystemTemperat!re
hese ite!s display CPU and syste! te!perature!easure!ent;
FA*s & oltaeMeas!rements
hese ite!s indicate coolin= fan speeds in 0PMand the 7arious syste! 7olta=e !easure!ents;
C$ange Pass#ord
If you highlight this item and press =#ter, a dialog box appears
which lets you enter a &upervisor password. Aou can enter no more
than six letters or numbers. %ress =#terafter you have typed in the
password. $ second dialog box asks you to retype the password for
confirmation. %ress =#terafter you have retyped it correctly. The
password is then reHuired to access the &etup 7tility or for that and
at start*up, depending on the setting of the %assword heck item
in $dvanced &etup.
(/
-
8/11/2019 (Manual Pc k7 810s50)
33/38
Mainboard Users Manual
Chan,e or emo7e the Pass+ord?ighlight this item, press 5nter and type in the current password.
$t the next dialog box, type in the new password, or just press
5nter to disable password protection.
E%it
?ighlight this item and press =#terto save the changes that you
have made in the &etup 7tility configuration and exit the program.
hen the &ave and 5xit dialog box appears, press Bto save and
exit, or press ;to exit without saving.
32
-
8/11/2019 (Manual Pc k7 810s50)
34/38
4: Soft+are < Applications
Chapter 0
Soft+are < Applications
Introduction
The support software )*4-! that is included in the mainboard
package contains all the drivers and utility programs needed to
properly run our products. elow you can find a brief description
of each software program, and the location for your mainboard
version. !ore information on some programs is available in a45$)!5 file, located in the same directory as the software.
/( the oper%ti#g syste* "sed i# yo"r syste* is ?i#do)s :8, it
)ill %"to*%ti$%lly i#st%ll %ll the drivers %#d "tilities (or yo"r
&o%rd. &ee the $uto*Installing under indows /1 section.
Installing Support So+t#are
The software on the support )*4-! is for indows /0'NT'(222
and indows /1. The installation procedure differs depending on
which -perating &ystem you have, but the automatic installation isnow for in/1 only.
#nstallin, under =indo+s .>0N!0'???To install support software for indows /0'NT'(222 follow this
general procedure