INSTRUCTION MANUAL

Model #Z470

(Lens: not included)

PROFESSIONAL Day & Night COLOR CAMERA

These symbols with supplemental markings are located at the rear of the camera

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : DO NOT REMOVE THE COVER

RISK OF ELECTRIC SHOCK.SNO USER ERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

CAUTION

Explanation of Graphical Symbols This symbol is intended to alert the user when there is un-insulated “dangerous voltage” within the products enclosure that may cause a risk of an electric shock. This symbol is intended to alert the user when there is important operating and maintenance instructions. . Note: This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a commercial environment. This product generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

- 1 -

WARNING

WARNING .............................................................................................. 1 Table of Content ..................................................................................... 2 Important Safety Precaution .......................................................................... 3 Feature .............................................................................................. 4 System Content ....................................................................................... 6 Description of Menu Set up ........................................................................... 7 Description of Controls & Operations Set up ....................................................................................... 9 Set up Lens .................................................................................. 10 Shutter Speed ................................................................................ 12 White Balance ................................................................................ 14 Back Light Compensation, AGC ................................................................. 15 DNR / Sense Up ............................................................................... 16 Camera ID .................................................................................... 17 Color / Sync. ................................................................................ 18 Motion Detection ............................................................................. 19 Privacy ...................................................................................... 20 Mirror ....................................................................................... 21 Sharpness .................................................................................... 22 Reset & Return ............................................................................... 23

TABLE OF CONTENT

Trouble Shooting .................................................................................... 24 Specifications ....................................................................................... 26 Warranty ............................................................................................. 29

- 2 -

Congratulations on purchasing this professional color camera. Before operating your Video Security System please read all the safety and operating instructions completely, and retain for future reference. To prevent electric shock and risk of fir hazards, Do NOT use power sources other than those specified. Never keep the camera face to strong light directly. It can damage the CCD. Do not drop the camera or subject them to physical shocks. It can cause malfunctions to occur. For best results, the installation should be made by a qualified technician. Modification of internal components may void the warranty.

Do not place the camera or its AC cord within reach of a child. Unplug the AC power from the wall outlets when the system is not in use. Plug into an electrical outlet with standard 110V household voltage Do not install the camera in extreme temperature conditions. To prevent overheating, keep the camera away from heat sources, such as

radiator, heat registers, stoves, or other appliances which produce heat. Use only the cables provided. Use of any others may damage the camera and void the warranty.

IMPORTANT SAFETY PRECAUTION

- 3 -

This video surveillance system will give you added security and comfort for many years. It is easy to install in almost anywhere you need video surveillance. Please read the installation and operating instruction in this manual, and keep it for future reference. FEATURES

DNR(Digital Noise Reduction)

By using the DSP chip applied to the DNR technology, the amount of low luminance noise has been reduced significantly and the signal-to-noise ratio as well as horizontal resolution has been improved. Therefore, you can get clear and sharp image display even in the subdued light.

Horizontal Resolution 530TV Lines Clear image quality has been achieved by employing a 1/3" SONY Super HAD CCD with 410,000 pixel (NTSC), 470,000 pixel (PAL), which provides a horizontal resolution of 530 TV lines.

Day & Night (Electronic changeable method) This camera has a auto function that electronically selects the mode that is appropriate for daytime or night-time condition. The COLOR mode operates in daytime condition to provide optimum colors, and BW mode operates

FEATURE

in night-time conditions to enhance the definition of the image.

Electronic IRIS The electronic IRIS function enables continuous automatic control of the shutter between 1/60(1/50)~1/120,000.

- 4 -

PRIVACY function

PRIVACY Masking function conceals the areas you do not wish to appear on the screen.

OSD menu The camera can be controlled by selecting text displayed on the monitor screen.

Dynamic BLC When the image is in front of strong background lighting, this feature reduces the back lighting to get the best image.

Sense Up (Fine Picture Condition Under Very Low Illumination)

1/3inch density CCD and digital processor permit high quality pictures to be captured in very low light conditions.

Motion Detection Your camera detects motion of objects.

Mirror Image You can switch to reverse the image on screen.

FEATURE

- 5 -

The following products should be included in the box. Please check that you have them all before starting the installation.

o (1) Professional Day & Night Color Camera. o (1) Auto Iris Lens Socket. o (1) Metal Lens Wrench o (1) Instruction Manual o (1) Warranty Registration Card

SYSTEM CONTENT

- 6 - • Menu Set Up

Push the SET button of control key and you will see the MENU map on screen.

LENS option ------------- DC MANUAL REAR SWITCH (VIDEO) SHUTTER -------------- ---(auto) FLK MANUAL / ESC WHITE BALANCE ---- ATW AWC MANUAL BACKLIGHT ----------- OFF LOW MIDDLE HIGH AGC ---------------------- OFF LOW MIDDLE HIGH DNR ---------------------- OFF LOW MIDDLE HIGH SENSE UP ------------- AUTO OFF SPECIAL ---------------- CAMERA ID COLOR SYNC MOTION DET

PRIVACY MIRROR SHARPNESS RESET RETURN

EXIT

DESCRIPTION OF MENU SET UP

- 7 - • Control Buttons Open the front glass cover and metal body by turning anti-clockwise and you will see the control key buttons.

SET Button – the camera provides an on-screen-picture menu.

DESCRIPTION OF MENU SET UP

DOWN

UP SET

LEF RIGHT

(A) Scroll up/down the functions by pressing the / button repeatedly (B) As you scroll down the function, the selected function will be highlighted by finger-sign (C) When the desired function is selected, press the & to adjust the value of the function

If nothing is selected for 20 seconds, it will automatically exit the menu mode or you can select Exit at the bottom of the menu mode and press the MENU button to exit the menu mode

- 8 -

Press the SET button to access the SETUP mode. The SETUP menu is displayed on the monitor screen.

Select the desired feature using the UP or DOWN button By pressing the UP or DOWN button.

Move the arrow indicator to the desired item. Change the status of the selected feature

using the LEFT or RIGHT button. If you press RIGHT or LEFT button,

it appears available status. Press the button when gets desired feature.

When completed, move the arrow indicator to ‘EXIT’ and press the SET button. Note

DESCRIPTION OF CONTROLS & OPERATION - SET UP

• • You can access submenu using SET button. • For the mode with ’---’, you may not access submenu.

- 9 -

Setting up the LENS -- Select the lens by pressing the RIGHT button. On the SETUP menu screen, move the arrow indicator to the lens using the UP or DOWN button. Select the desired feature using the LEFT or RIGHT button.

DESCRIPTION OF CONTROLS & OPERATION - SET UP LENS

- 10 -

When DC LENS selected, press SET button to control the BRIGHTNESS.

Note

DESCRIPTION OF CONTROLS & OPERATION – SET UP LENS

AUOT IRIS LENS(DC TYPE) is recommended than MANUAL LENS.

- 11 - Shutter status and speed control (You can control brightness of the screen by the shutter speed)

Press the SET button to display the setup menu and move the arrow indicator to ‘SHUTTER’ using the UP or DOWN button. Set ‘SHUTTER’ to the desired mode using the LEFT or RIGHT button. OFF : Deactivation

DESCRIPTION OF CONTROLS & OPERATION - SHUTTER SPEED

FLK(1/100) : Flicker mode (When WDR is on, the image may flicker a little.)

- 12 -

MANUAL : When setting shutter speed manually, ESC : You can control the BRIGHTNESS. (Only for LENS mode) You can select speed from When completed, press ‘SET’ ‘1/60’ to ‘1/200,000’sec

DESCRIPTION OF CONTROLS & OPERATION - SHUTTER SPEED

- 13 -

WHITE BALANCE (WHITE BAL.) MANUAL : To fine adjust, select the Manual mode. When color correction is needed, use You can increase or decrease the red/blue factor ‘WHITE BALANCE’ function. while monitoring the difference on the screen. Press the SET button to display the SETUP menu Set to ‘MANUAL’ mode and press the SET button. and move the arrow indicator to Increase or decrease the value for RED(R-Gain) to ‘WHITE BALANCE’. and BLUE(B-Gain), watching the color Set ‘WHITE BAL.’ to the desired mode. of the picture, and press the SET button when you obtain the best color.

DESCRIPTION OF CONTROLS & OPERATION – WHITE BALANCE

Don’t make the camera exposed fluorescent lamp directly not to get unstable image in the internal synchronization modes. When the SHUTTER menu is set to FLK mode, SENS-UP can not work. Please control the menu.

. ATW (Auto Tracking White Balance) When color temperature is 2400~12000K, (ex. A fluorescent lamp, outdoor) Select this mode. AWC (Auto White Balance Control) The white balance is automatically adjusted in a specific environment. In order to obtain the best result, press the set button while the camera focuses on white paper. If the environment including the light source is changed, you have to adjust the white balance again.

- 14 -

BACKLIGHT AUTO GAIN CONTROL (AGC) The built-in SR chip provides intelligent light level control AGC is to get bright picture. Higher GAIN level, to compensate for severe Backlight conditions. getting brighter screen. ① Press the SET button to display the SETUP menu But you can increase digital noise (static).

and move the arrow indicator to ‘BACKLIGHT’. ① Press the SET button to display the SETUP

② SET ‘BACKLIGHT’ to the desired mode. menu and move the arrow indicator to ‘AGC’ SET ‘BACKLIGHT’ to the desired mode.

DESCRIPTION OF CONTROLS & OPERATION-BACK LIGHT, AGC

Proper White Balance may not be obtained under the following conditions. In these cases select the AWC mode. -When the scene contains mostly high color temperature object, such as a blue sky or sunset. -When the scene is dim. -If your camera faces fluorescent lamp directly or is installed in the place of the changing

illumination.

OFF LOW MIDDLE HIGH OFF LOW MIDDLE HIGH

- 15 - DESCRIPTION OF CONTROLS & OPERATION - DNR / SENSE UP

Digital Noise Reduction (DNR) SENSE-UP DNR is to reduce the digital noise on the screen. You can improve your image with this Press the SET button to display the SETUP menu function under night or low-lighting level. and move the arrow indicator to ‘DNR’. ① Press the SET button to display the SETUP Set ‘DNR’ to the desired mode. menu and move the arrow indicator to ‘SENCE UP’.

② Set ‘SENSE UP’ to the desired mode.

OFF : Deactivation AUTO : When your camera is LOW : Low reduction of the noise under night or low-lighting MIDDLE : Middle reduction of the noise level, select this mode. HIGH : High reduction of the noise OFF : Deactivation

- 16 -

SPECIAL Press the SET button to display the SETUP menu and move the arrow indicator to ‘SPECIAL’. Move the arrow indicator to ‘CAMERA ID’ and set ‘ON’ using the LEFT or RIGHT button.

DESCRIPTION OF CONTROLS & OPERATION-CAMERA ID

Afterimage may appear with DNR. If you change the ‘GAIN’ menu from AGC-L to AGC-H, sensitivity is increased as well as noise on the screen. When selected ‘GAIN’ menu OFF, DNR will not work.

If you control the low-light action maximum magnifications.(X2~X128), You can get the brighter screen as well as the afterimage. When increase the magnifications, it may appear noise, spots and whitish. This is not out of order.

Press SET button to access the SETUP mode and you can enter up to 15 characters. a. Move the cursor to character-enter location and select the desired character. b. Press SET button to confirm the blinking character. The first character is saved and the cursor moved to the next position. Repeat steps of a and b until you create the full name you want. c. Select the position at which the CAMERA ID will b located on the screen. - Move the cursor to ‘POS’ and press SET button to select the position. - Press the SET button to confirm the position. d. When completed, move the cursor to ‘END’ and press SET button

- 17 -

COLOR. SYNC. You can choose color and B/W mode electronically. Two SYNCHRONIZATION modes are available, Press the SET button to display the setup menu INTERNAL and EXTERNAL LINE-LOCK.

DESCRIPTION OF CONTROLS & OPERATION-COLOR/SYNC.

If the CAMERA ID feature is set to ‘OFF’, the name will not displayed in the monitor.

If you make a mistake while entering name, move the cursor to ‘CLR’ and press ‘SET’ button. After erasing the character from right to left, correct the character again.

and move the arrow indicator to ‘COLOR’. The line-lock synchronization is only used SET ‘COLOR’ to the desired mode. in the area of 60Hz(NTSC) / 50Hz(PAL Mode).

ON : color mode OFF : B/W mode Press the SET button to display the setup AUTO : Color mode --> B/W mode in low light. menu and move the arrow indicator to ‘SYNC’. SET to the desired mode.

INT : Internal synchronization L/L : If you choose ‘L/L’, you can adjust the desired phase. - Press the SET button. - You can adjust the phase from 0 to 270.

- 18 -

Whenever your camera detects motion of objects being displayed ‘MOTION DETECTED’ with the number Count will appear on the screen.

DESCRIPTION OF CONTROLS & OPERATION-MOTION DETECTION

OSD Key may not work for 3 seconds for the stable when COLOR/BW mode is changed. If you see the screen under the infrared light, you can get out of focus.

When it used in AC power, L/L mode can be used. In DC12V, the SYNC menu sets ‘INT’ mode.

Press the SET button to display the setup menu and move the arrow indicator to ‘MOTION DET’. SET ‘MOTION DET’ to the desired mode using the LEFT or RIGHT button.

Maximized Size Minimized Size

OFF : Deactivation ON : MOTION DET. activated - Move the arrow indicator to ‘AREA SET’ and set the areas you want to observe.

- 19 -

PRIVACY : To mask area which you want to hide from the monitors view.. Press the SET button to display the setup menu and move the arrow indicator to ‘PRIVACY’

DESCRIPTION OF CONTROLS & OPERATION-PRIVACY

using the UP and DOWN button. SET ‘PRIVACY’ to the desired mode using the LEFT or RIGHT button.

OFF : Deactivation ON : PRIVACY mode activated - Press the SET button and move the arrow indicator to area you want to mask. - Set ‘ON’ and then the area’s bounds will be displayed like "MOTION DET. set"

- 20 - DESCRIPTION OF CONTROLS & OPERATION-MIRROR

MIRROR IMage Press the SET button to display the setup menu and move the arrow indicator to ‘MIRROR’ using the UP and DOWN button. SET ‘MIRROR’ to the desired mode using the LEFT or RIGHT button.

OFF : Deactivation ON : Make a reverse turn to RIGHT or LEFT.

- 21 -

SHARPNESS

DESCRIPTION OF CONTROLS & OPERATION-SHARPNESS

Press the SET button to display the setup menu and move the arrow indicator to ‘SHARPNESS’ using the UP and DOWN button. SET ‘SHARPNESS’ to the desired mode using the LEFT or RIGHT button.

OFF : Deactivation ON : SHARPNESS control mode (level 0~31) Increasing the sharpness can make image clearer. Please do not increase the level too much as you could get the an unnatural image with digital noise.

- 22 -

RESET : To reset your camera to FACTORY DEFAULT SETTING.

DESCRIPTION OF CONTROLS & OPERATION-RESET & RETURN

RETURN : Save the setting of SPECIAL function, and then move to SET UP menu.

- 23 -

If you have trouble operating your camera, refer to the following table.

TROUBLE SHOOTING

Before calling for service, check the chart. If the guidelines do not enable you to solve the problem, contact an authorized technician.

Symptom Solution

No Picture

Check that the AC cord is correctly connected Check that the AC socket is live by plugging in another piece of equipment Ensure that the camera cables are properly connected Check that the connector is not bent or the pins bent Check that the video cable is connection between camera

and monitor properly. The image on the screen Is too dim.

Is lens stained with dirt? Clean your lens with soft, clean cloth. If the camera is exposed to too strong light change the camera position. Adjust the lens’ focus properly.

The image on the screen is too dark.

Adjust the contrast feature of the monitor. If you have an intermediate device, set the 75Ω/Hi-z properly.

The camera is not working properly or the picture is unstable.

Check that you have properly connected the camera to an appropriate power source

Cable should be securely attached to the camera Press the power switch ON or OFF

MOTION DETECTION function is not active.

Have you set ‘MOTION DET.’ menu to off? Have you set ‘MD LEVEL’ to too low ? Have you set ‘MD AREA’ properly

- 24 -

TROUBLE SHOOTING

Symptom Solution

The color of the picture is not correct.

Check that you have properly set the ‘WHITE BAL’ feature

The image on the screen flickers.

Is the camera facing into direct sunlight or fluorescent lighting? Change the camera position.

L/L mode can not be selected.

Have you connected your camera to DC power source? Never connect it to AC power source directly.

Bouncing or wavy picture on the monitor

Move any electrical devices that may be causing the electrical interference away from the monitor

See this manual for FCC information Unshielded audio speakers placed next to the monitor can cause picture

distortion. If applicable, move the speakers away from the monitor

- 25 - SPECIFICATIONS

Specification NTSC PAL

Image Device 1/3inch, Sony Super HAD CCD (ICX408AK)

1/3inch, Sony Super HAD CCD (ICX409AK)

Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Scanning System 2:1 Interlace Synchronization Internal/Line Lock Frequency Horizontal:15.734KHz/Vertical:59.94Hz Horizontal:15.625KHz/Vertical:50.00Hz Resolution 530 TV Lines(Min.) S/N (Y signal) 50 dB (AGC Off, Weight ON) Video Output CVBS : 1.0Vp-p/75Ω Min. Illumination 0.3 Lux/F1.2 (50 IRE , AGC HIGH, DNR HIGH) / 0.002 Lux (Sens-up X128)

White Balance ATW / AWC / Manual (1,800° K ~ 10,500° K)

Electronic shutter speed AUTO / MANUAL (X128, 1/60sec ~ 1/120,000sec)

Sens-up and Sens-up Limit is selectable / Flickerless

AUTO / MANUAL (X128, 1/50sec ~ 1/120,000sec)

Sens-up and Sens-up Limit is selectable / Flickerless

O.S.D Built-In Backlight Compensation Low, Middle, High, Off Selectable Gain Control Low, Middle, High, Off Selectable DNR Low, Middle, High, Off Selectable

˚ ˚ ˚ ˚

- 26 - SPECIFICATIONS

Specification NTSC PAL

DAY & NIGHT AUTO / ON SYNC INT / LL Selectable Motion Detection ON / OFF (4 Zone) PRIVACY ON / OFF (4 Zone) MIRROR ON / OFF SHARPNESS ON / OFF (Level Adjustable) Input Voltage DC 12V ± 10 % Power Consumption Max. 2.0W (166mA) Operation Temperature / Humidity

-10° C to +50° C / 30% to 80% RH

Storage Temperature/ Humidity

-20° C to +60° C / 20% to 90% RH

Dimension 62(W) × 54(H) × 108(L)mm Weight 300g Net

- 27 -

LIMITED 2 YEAR WARRANTY

This warranty gives the original purchaser specific legal rights and you may also have other rights, which vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair free for 2 year on parts and labor from the date of original purchase. This warranty does not cover modification, abuse, incidental or consequential damages unless the state of owner’s residence specially prohibits limitations on incidental or consequential damages.

HOW TO OBTAIN FACTORY SERVICE 1. Original purchaser must fill out a warranty card and mail to factory with model number, serial number and the

date of purchase. 2. We will repair or replace the item and return to owner under this limited warranty. 3. Please pack the system carefully and securely using the original packing materials, and send it prepaid and

insured to the factory. 4. Please include a check for US$20.00 to cover the cost of return postage and handling. If the system is returned

within the warranty period, please include a proof of purchase. If the system is out of warranty, you will receive an estimate of the repair cost for your approval before repair work will be started.

- 28 -

WARRANTY REGISTRATION This card should be mailed within 15 days of purchase. Description _______________________________________

Model Number _______________________________________

Serial Number _______________________________________

Purchase Date _______________________________________

Point of Purchase Address _______________________________________

“I hereby certify that the products on this card will be used in accordance with User’s Instructions” Your Name _______________________________________________

Address _______________________________________________

City __________________________ State ____________Zip_________

Your Signature ______________________________________________