manual cosmed treadmill ergometer en

file: n:\article\cos14310m5-v1_07cme-en\20140318_cos14310m5-v1_07cme-en_manual_cosmed_running_machine_print.doc © 2014 h/p/cosmos sports & medical gmbh [email protected] created 15.04.2014 printed 15.04.2014 page: 1 of 16

running machines operat ing and service manual

Following chapters of the provided h/p/cosmos operating and service manual have to be replaced by the content of this

attachement; for these chapters please consider the content of this attachement only.

Foreword, chapter 1 “model overview“, chapter 11 “technical data“, chapter 12 “options and accessories”, chapter 17 “contact“.

treadmill ergometer

T150

T170

T200

manual-version

MCU5-v1.07

revision 15.04.2014

order number:

[cos14310m5-v1.07cme-en]

sales & service

COSMED S.r.l.

Via dei Piani di Monte Savello, 37

IT 00040 Pavona di Albano - Rome

Italy

phone +39 06 9 31 54 92

fax +39 06 9 31 45 80

[email protected]

www.cosmed.it

development & production

h/p/cosmos sports & medical gmbh

Am Sportplatz 8

DE 83365 Nussdorf-Traunstein

Germany

phone +49 86 69 86 42 0

fax +49 86 69 86 42 49

[email protected]

www.h-p-cosmos.com


Dear customer, We would like to express our gratitude for putting your trust in us, in deciding for this top of the range running machine. Since 1988 h/p/cosmos® has been developing and manufacturing running machines, systems and accessories for applications in sports, rehabilitation, medicine, diagnostics and science. When it comes to technology, ergonomy, design and safety, we have set extremely high standards for ourselves.

Because the running machine is a motor-driven device, you must pay special attention to the mentioned safety regulations. If proper notice is taken of the safety regulations, the operation of our running machines is nearly without risk. Neglect of the safety regulations could result in dangerous situations and accidents with serious injury or death. Therefore please read this operating and service manual and the danger precautions in full before taking the device into operation. Some simple maintenance and monitoring (no repair work!), as described, can easily be done or even have to be done by yourself. All kinds of installation and repair work and most maintenance work are to be performed only by trained and authorized technicians who have been certified by h/p/cosmos. The following symbols will indicate which work can be done by the customer and which work has to be done by authorized technicians only:

The customer/user should perform this maintenance and monitoring work. Some safety checks or monitoring (for example harnesses and ropes, running belt condition and position, etc.) have to be performed on daily basis. It is not expedient to contract certified technicians for such maintenance work. However, where it is practical, all maintenance and monitoring work marked with this symbol can also be performed by certified technicians also.

All installation, maintenance, repair and monitoring work marked with this symbol must only be performed by trained and authorized technicians who have been certified by h/p/cosmos. Customers/users must not perform these kinds of tasks and work.

We recommend calling our competent service team or entering into a maintenance contract for a routine service at an interval of 6 or 12 months for standard machines and standard applications. A form for registration of your institution and device is included in the delivery. In order to be able to supply you with the latest technical information and service, it is important for you to fill out the form. Therefore please fill out the form for registration immediately and send it back via fax, email or mail. This and the manufacturer’s operating and service manual as a firm part of the delivery have to be accessible to the user at any time. They have been written with great care. Should you, however, still find any details which do not correspond with your device, please notify us so that we can correct any mistakes as soon as possible. Subject to alterations without prior notice. Errors and omissions excepted. We wish you a lot of fun and success while exercising and working with your h/p/cosmos running machine.

h Franz Harrer President & CEO h/p/cosmos sports & medical gmbh


1 Model overview

n

medical running machines

c sports & fitness running machines

T150 D med

T150 DE med T150 D T150 DE

T170 D med

T170 DE med

T170 DE sportmed

T170 D T170 DE

T200 S

T200 M n.a.


11 Technical data

11.1 Treadmill ergometer, 150/50 (T150)

T150 DE med T1

50 D

T150

DE

T150

D m

ed

T150

DE

med

UserTerminal (display & keyboard)

6 LCD displays / 6 keys / display of mode and unit with LED.

Power supply AC (standard, read nameplate), dedicated line required.

U: 100 V ~ / 110 V ~ / 200 V ~ / 208 V ~ / 230 V ~ including N and PE

f: 50/60 Hz Fuse (standard, read nameplate) C 16 A at 230 V ~Power input (long time) 1500 VA

Power input (momentary) 3400 VA

(peak performances for milliseconds; max. 1s/min during heel strike) Drive motor capacity 3300 VA Elevation motor capacity n.a. 390 VA n.a. 390 VA

Safety standards

c

IEC EN 60335-1(VDE 0700) IEC EN 60601-1-2,

IEC EN 60601-1-4, VDE 0701, EN 957-1, EN 957-6, Machinery Directive 2006/42/EG

n

MDD, directive 93/42/EEC + 2007/47/EC, IEC EN 60601-1 (VDE 0750), VDE 0751, IEC EN 60601-1-2, IEC EN 60601-1-4,

EN 957-1, EN 957-6, Machinery Directive 2006/42/EC Leakage current 0.6 mA 0.2 mA Isolation transformer --- 2000 VA

Degree of protection: class I M / --- / IP 20 class I M / type B R / IP 20

Overvoltage category Life-Earth < 300 V

transient over-voltage limit 1500 V Category II: Life-Earth < 300 V

transient over-voltage limit 2500 V Mode of operation continuous operation with intermittent loading (according to IEC 60601-1) Field of application / accuracy sports and fitness: S,I,A (EN957) sports and medical: S,I,A (EN957)

Classification according to MDD --- active therapeutic device and

active diagnostic device, risk class II b Speed Definition

0.0 ... 22.0 km/h0.1 km/h

Speed accuracy* +/- 5 %Option special speed 0.0 ... 10.0 km/h or ... 30.0 km/hAngle of inclination** Definition

n.a. 0.0 ... 25.0 %**

0.1 % n.a.

0.0 ... 25.0 %**0.1 %


T150 DE med T1

50 D

T150

DE

T150

D m

ed

T150

DE

med

Dimension of running surface length x width

1500 x 500 mm

Dimension frame length x width x height

2100 x 800 x 1370 mm(UserTerminal + 150 mm width)

Track access height from floor 180 mmWeight of device 200 kg 220 kg

Weight load limits to floors (traffic load to DIN 1055 part 3)

8.2 kN/m² 8.3 kN/m²

In case of any further questions related to load limits onto floors, please ask our service department.

Max. permissible user weight 200 kg (deviation on request specially made)

Environmental conditions: Transport and storage

temperature: –30...+50 °C,humidity: 0...95 % - without condensation

barometric pressure: 700...1060 hPa

Environmental conditions: Operation

temperature: +10...+40 °C (deviation on request), humidity: 30...70% - without condensation (up to 95% on request),

barometric pressure: 700...1060 hPa Maximum operating altitude: approx. 10,000 feet (3000m), without pressurization

Pollution degree Degree 2: Normally only nonconductive pollution. Temporary conductivity caused by condensation is to be expected.Central lubrication system manualNumber of stored programmes 6 training profiles / 10 test profiles / 8 user definable profiles

RS232 Digital interface / serial port (USB-converter optional)

COM1: standardCOM2: optional

COM3: optional (standard for service) COM4: optional

Heart rate measurement POLAR, 1 channel receiver, ECG preciselyPC software (not for medical applications)

h/p/cosmos para control® includedoptions: h/p/cosmos para graphics®, h/p/cosmos para analysis® and h/p/cosmos para motion®

Reverse belt rotation optionalSafety arch with chest belt system***

optional

Handrails options: short / long / adjustable handrails, crossbar

Arm support optional

Additional keyboard optional

* Overload and weak power supply (under voltage) could lead to higher discrepancies concerning the speed display or dripping of the fuse.

** The time of operation of the elevation motor (TO = 15 %) converts to approx. 5 full elevation cycles. Overload can result in temporary tripping of the fuse, but can be used again after short cool down period. Treadmills of the h/p/cosmos saturn series built approx. before January 2007 have a maximum elevation of 25 %.

*** For maximum stress tests and with oversize running machines (track sizes) a safety facility (e.g. a safety arch with chest belt system) is necessary and highly recommended. Data of weight and measurements can deviate.

Ask for further details and optional equipment or visit www.h-p-cosmos.com. Subject to technical alterations without prior notice. E & OE.


11.2 Treadmill ergometer, 170/65 (T170)

T170 DE med T1

70 D

T170

DE

T170

D m

ed

T170

DE

med

T170

DE

spor

tmed


6 LCD displays / 6 keys / display of mode and unit with LED.


U: 100 V ~ / 110 V ~ / 200 V ~ / 208 V ~ / 230 V ~ including N and PE

f: 50/60 Hz Fuse (standard, read nameplate) C 16 A at 230 V ~Power input (long time) 1600 VA

Power input (momentary) 3500 VA

(peak performances for milliseconds; max. 1s/min during heel strike) Drive motor capacity 3300 VAElevation motor capacity n.a. 500 VA n.a. 500 VA

Safety standards

c

IEC EN 60335-1(VDE 0700) IEC EN 60601-1-2,

IEC EN 60601-1-4, VDE 0701, EN 957-1, EN 957-6, Machinery Directive

2006/42/EG

n

MDD, directive 93/42/EEC + 2007/47/EC, IEC EN 60601-1 (VDE 0750), VDE 0751, IEC EN 60601-1-2, IEC EN 60601-1-4,

EN 957-1, EN 957-6, Machinery Directive 2006/42/EC

Leakage current 0.6 mA 0.2 mA Isolation transformer --- 2000 VA

Degree of protection: class I M / --- / IP 20 class I M / type B R / IP 20

Overvoltage category Life-Earth < 300 V

transient over-voltage limit 1500 V Category II: Life-Earth < 300 V

transient over-voltage limit 2500 V Mode of operation continuous operation with intermittent loading (according to IEC 60601-1) Field of application / accuracy sports and fitness: S,I,A (EN957) sports and medical: S,I,A (EN957)

Classification according to MDD --- active therapeutic device and

active diagnostic device, risk class II b Speed Definition

0.0 ... 30.0 km/h0.1 km/h

0.0 ... 40.0 km/h0.1 km/h

Speed accuracy* +/- 5 %

Option special speed 0.0 ... 10.0 km/h, 0.0 ... 40.0 km/h, 0.0... 45.0 km/h 0.0 ... 10.0 km/h0.0... 45.0 km/h

Angle of inclination** Definition

n.a. 0.0 ... 25.0 %

0.1 % n.a.

0.0 ... 25.0 % 0.1 %


T170 DE med T1

70 D

T170

DE

T170

D m

ed

T170

DE

med

T170

DE

spor

tmed


1700 x 650 mm


2300 x 1050 x 1410 mm(UserTerminal + 150 mm width)

Track access height from floor 230 mmWeight of device 310 kg 315 kg 330 kg 335 kg Weight load limits to floors (traffic load to DIN 1055 part 3)

6.2 kN/m²In case of any further questions related to load limits onto floors, please ask our service department.

Max. permissible user weight 200 kg (deviation on request specially made)







Pollution degree Degree 2: Normally only nonconductive pollution. Temporary conductivity caused by condensation is to be expected.Central lubrication system manualNumber of stored programmes 6 training profiles / 10 test profiles / 8 user definable profiles

RS232 Digital interface / serial port (USB-converter optional)

COM1: standardCOM2: optional

COM3: optional (standard for service) COM4: optional

Heart rate measurement POLAR, 1 channel receiver, ECG precisely

PC software (not for medical applications)

h/p/cosmos para control® included options: h/p/cosmos para graphics® and h/p/cosmos para analysis®

para control®,para graphics®

options: para analysis®, para motion®

Reverse belt rotation optional standardSafety arch with chest belt system***

optional

Handrails options: short, long, crossbar (standard)Arm support optionalAdditional keyboard optional






11.4 Treadmill ergometer, 200/75 up to 300/125 (T200, T250, T300)

T200

T200 S T200 M


External control unit with TouchScreen


200 V 3N~ / 208 V 3N~ / 400 V 3N~with N and PE

(peak performances for milliseconds; max. 1s/min during heel strike) Fuse (standard, read nameplate) 3 x C 32 A at 400 V 3N~Power input (long time) 7500 VAPower input (momentary) 15200 VADrive motor capacity 11000 VAElevation motor capacity 370 VA

Safety standards

n

MDD, directive 93/42/EEC + 2007/47/EC, IEC EN 60601-1 (VDE 0750), IEC EN 60601-1-2, IEC EN 60601-1-4

VDE 0751, EN 957-1, EN 957-6, Machinery Directive 2006/42/EC Leakage current 0.25 mAIsolation transformer 3 x 3000 VA

Degree of protection: class I M / type B R / IP 20

Overvoltage category Category III: Life-Earth < 300 Volt = transient over-voltage limit 4000 Volt Mode of operation continuous operation with intermittent loading (according to IEC 60601-1)

Field of application / accuracy sports and medical / S,I,A (EN957)

[r] = suitable for bicycle and wheelchair application (from running surface 3000 x 1250 mm standard) Classification according to MDD active therapeutic device and active diagnostic device, risk class II b Speed Definition

0.0 ... 40.0 km/h / 0.1 km/h0.0 ... 11.11 m/s / 0.1 m/s

Speed accuracy* +/- 5 % (class A based on EN 957)

Option special speed 0.0 ... 30.0 or ... 50.0 or ... 60.0 or ... 80.0 km/h

on request higher speed versions than 40 km/h only for sports models Angle of inclination** Definition

-35.0 % ... +35.0 %0.1 %


T200 T200

S

T200

M


2000 x 750 2000 x 1000


2400 x 1150 x 1380 2400 x 1400 x 1380

Track access height from floor 480 mmWeight of device 850 kg 900 kg

Weight load limits to floors (traffic load to DIN 1055 part 3)

9.0 kN/m² 7.5 kN/m²

In case of any further questions related to load limits onto floors, please ask our service department.

Max. permissible user weight 280 kg

(deviation on request specially made)







Pollution degree Degree 2: Normally only nonconductive pollution. Temporary conductivity caused by condensation is to be expected.Central lubrication system manual / running machines with [r] have automatic central lubrication system Number of stored programmes 6 training profiles / 10 test profiles / 8 user defined profiles RS232 Digital interface / serial port (USB-converter optional)

COM1: standard; COM2: standard; COM3: n/a (standard for service); COM4: n/a

Heart rate measurement POLAR W.I.N.D. with WearLink

coded transmission transmission range approx. 10 m

PC software (not for medical applications)

h/p/cosmos para control® and h/p/cosmos para graphics® included option: h/p/cosmos para analysis®, h/p/cosmos para motion®

Reverse belt rotation standardSafety arch with chest belt system***

obligatory option (or alternative fall stop preventive system)

Handrails optional

Wheelchair stabilizer optional

Additional keyboard optional





Chapter 11.3 does not apply, chapter 11.5 up to 11.8 see h/p/cosmos operating and service manual.


12 Options and accessories

The following chapter describes the accessories and options available at COSMED.

Only connect and/or use accessories, software and host equipment if it is approved as compatible by all manufacturers. Non-compliance with this clause can lead to serious injury or death. Furthermore, manufacturer warranty and liability expires. Pay special attention to all safety regulations and operation instructions in the manufacturer’s operating and service manual.

OEM options order number article description

COSMED handrail long 150/50 cos100114

COSMED handrail long 170/65

handrails upgrade (during production) order number higher prices than the upgrade prices are applicable for retrofitting

of options and accessories ***

Handrail crossbar 50/36 arched with grip cover cos16571 crossbar with fixation clamps for handrail D=60 mm, for models with

running surface 150/50 cm

Handrail crossbar 65/36 arched with grip cover cos15133-02 crossbar with fixation clamps for handrail D=60 mm, for models with

running surfaces 170&190/65 cm

Handrail long/short/rolled sep.1/3 200 cos14190 2/3 of the rear length of the handrails are detachable for running surface

200 cm long

Bottle holder for handrail (D=60 mm) cos11020 the bottle holder is suitable for all standard drinking bottles (1x included

with every treadmill)

additional keyboard & accessories order number

h/p/cosmos additional keyboard cos100680 6 keys with wire connection; works parallel to user terminal keys - without

mounts

Holder for optional keyboard on handrail (D=60

mm)

cos14135 holder for the additional keyboard on the handrail (D=60 mm)

Rear panel terminal for additional options cos10109 for running machines with user terminal (free with safety arch, additional

keyboard, extra safety stop)

reverse belt rotation order number

Reverse belt rotation (downhill) 150/50 cos00098100045 for models with running surface 150/50 cm, incl. safety-stop waist belt &

magnet switch

Reverse belt rotation (downhill) 170/65 cos10181-01 for models with running surface 170/65 cm, incl. safety-stop waist belt &

magnet switch

sepcial speed * order number higher prices than the upgrade prices are applicable for retrofitting


Special speed 0 - 10 km/h 150/50 cos10000 for rehabilitation and therapy for models with running surface 150/50 cm

Special speed 0 - 30 km/h 150/50 cos00096110008 for athletes for models with running surface 150/50 cm

Variable elevation speed 200+/75+ cos100923 Elevation/gradient can be changed in various speed; for models with

running surface 200/75…300/125 cm. Manufactured after January 2011.

safety systems order number higher prices than the upgrade prices are applicable for retrofitting


Safety arch 50 with harness & chest belt / fall-stop

prevention

cos10079 fall protection for all applications (mandatory for high risk applications); for

running surface 50 cm wide


prevention




prevention




prevention



Safety arch upgrade h=220 cm cos144 ** upgrade for safety arch for users up to 2.20 m

Chest belt XL for safety arch cos14903-03-XL chest belt for safety arch, size XL (chest measurement: 125-155 cm)

Chest belt L for safety arch cos14903-03-L chest belt for safety arch, size L (chest measurement: 105-135 cm)

Chest belt M for safety arch cos14903-03-M chest belt for safety arch, size M (chest measurement: 85-115 cm)


Chest belt S for safety arch cos14903-03-S chest belt for safety arch, size S (chest measurement: 65-95 cm)

Chest belt XS for safety arch cos14903-03-XS chest belt for safety arch, size XS (chest measurement: 55-75 cm)

Chest belt XXS for safety arch cos14903-03-XXS chest belt for safety arch, size XXS (chest measurement: 45-65 cm)

Rear panel terminal for additional options cos10109 for running machines with user terminal (free with safety arch, additional

keyboard, extra safety stop)

Magnet with ripcord incl. plastic clip (spare part) cos101699 safety stop lanyard pull-cord with magnet (only spare part "magnet, cord

and clip", not the integrated contact switch)

Emergency stop-button with magnet holder + 5 m

spiral cable

cos15933 and Velcro-Strip for safety reasons. Jack at this treadmill is prerequisite!

Quote treadmill serial no. for refitting.

Emergency stop-button with magnet holder + 10 m

spiral cable

cos100548 and Velcro-Strip for safety reasons. Jack at this treadmill is prerequisite!

Quote treadmill serial no. for refitting.

special colour order number

Special colour treadmill frame 150/50 in RAL cos00098110004 all special (RAL) colours (incl. pure white, signal blue, sulphur yellow); free

of charge for orders of 5 or more

Special colour treadmill frame xx/65 in RAL cos100138 all special (RAL) colours (incl. pure white, signal blue, sulphur yellow); free

of charge for orders of 5 or more

special voltages order number

Special voltage for medical devices from 150/50 to

170/65

cos101214 voltage-M U:100V AC1~/N/PE 25A f50/60Hz (not recommended due to

performance limitations)

Special voltage for sports devices from 150/50 to

170/65

cos101215 voltage-S U:100V AC1~/N/PE 25A f50/60Hz (not recommended due to



170/65

cos10470 voltage-S U:110V AC1~/N/PE 25A f50/60Hz (not recommended due to



170/65

cos10468 voltage-S U:200V AC1~/N/PE 20A f50/60Hz (consider performance

limitations)


170/65

cos16172 voltage-S U:208V AC1~/N/PE 20A f50/60Hz (consider performance

limitations)


170/65

cos10469 voltage-M U:110V AC1~/N/PE 25A f50/60Hz (not recommended due to



170/65

cos12850 voltage-M U:200V AC1~/N/PE 20A f50/60Hz (consider performance

limitations)

Special voltage for medical device 170/65 3p cos16153-01 voltage-M U:200V AC3~/PE 32A f50/60Hz


170/65

cos15990 voltage-M U:208V AC1~/N/PE 20A f50/60Hz (consider performance

limitations)

Special voltage for medical device 170/65 3p cos12068 voltage-M U:208V AC3~/N/PE 32A f50/60Hz

Transformer 3p Dyn5 200V/208/220/400/480 cos100803-01 transformer for special voltage of 3x200V/76A, 3x208V/72A, 3x220V/67A,

3x400V/36A, 3x480V/30A

f: 50/60 Hz, incl. housing in IP21, protectors and jacks of 1p/3 p

wheel chair ramps order number

Wheelchair ramp L: 1.25 m for treadmill 150/50 cos16186-01 wheelchair ramp (L: 125 cm x W: 80 cm) for models with running surface

150/50 cm

Access aid for wheelchair ramp cos16186-01 cos101614 additional hatch (1 pair = left/right), which almost eliminates the step

between wheelchair ramp and running deck

Wheelchair ramp L: 1.25 m for treadmill

170&190/65

cos101057va01 wheelchair ramp (L: 125 cm x W: 105 cm) for models with running surface

170&190/65 cm

user terminals order number

UserTerminal Touchpanel external remote control cos10002-02 connected via RS232 and coscom® interface to the treadmill (available on

request)

UserTerminal Touchpanel retro fit kit for handrail

mounting

cos14569-02 connected via RS232 and coscom® interface to the treadmill (available on

request), for handrail (D=60 mm)

Display & Keyboard 6 keys retro fit kit for

UserTerminal MCU5

cos15312va02 retrofit-kit Display & Keyboard for UserTerminal, extra charge for travel

costs and installation; (available on request)

Folding shelf for external control desk,

UserTerminal oversize treadmill

cos100781 for models with running surface 200+/75+ cm, manufactured after January

2011

Notebookholder (mounted on ext. control desk

oversize treadmill)

cos13320-01 for models with running surface 200+/75+ cm, manufactured after January

2011

interfaces, cables & printers order number

Heart rate receiver set POLAR® WIND incl.

Waerlink transmitter

cos100106 digital heart rate transmission through POLAR® WIND WearLink, coded,

with transmission range approx. 10 m


POLAR® HeartRate Sensor H7 Wearlink® Bluetooth

Smart

cos101787 wireless transmitter including chest belt size M-XXL, for smartphones,

iPhone (from iPhone 4S, iOS 5.1)

2nd interface RS232 com2 coscom® 9,600 bps cos00098010025 additional RS232 port for ECG, EEG, PC, printer or UserTerminal

3rd interface RS232 com3 coscom® 115,200 bps cos16487 additional RS232 port for ECG, EEG, PC, or UserTerminal with increased

data speed

Connection cable RS232 5 m cos00097010034 RS232, 5 m (Sub-D 9-pin male/female), USB-Adapter optionally available

(cos12769-01)

Connection cable RS232 10 m cos00097010035 RS232, 10 m (Sub-D 9-pin male/female), USB-Adapter optionally

available (cos12769-01)

Connection cable RS232 15 m cos11889 RS232, 15 m (Sub-D 9-pin male/female), USB-Adapter optionally

available (cos12769-01)

Potential equalization cable 5 m (with 2 POAG-

plugs)

cos10223 potential equalization cable for medical devices

RS232 - Centronix converter for printer cos10056 converter for connecting PCL printer directly to running machine

USB to RS232 converter cos12769-01 converter from USB to serial port RS232 (Sub-D 9-pin male)

Laser printer BW + interface converter cos10073 laser printer BW + interface converter and cable

Laser printer COL cos15511-03 laser printer 4-COL

h/p/cosmos satellite print bw cos14954 laser printer B/W, RS232 converter and cable, h/p/cosmos printer table

h/p/cosmos satellite PC med cos14970 medical PC, 19" LCD Monitor, COL Laser printer, h/p/cosmos PC table

with 4 wheels

DELL Laptop Computer cos13476-01 technical details and specification on request

lactate measurement, supplies & software order number

Software h/p/cosmos para control® cos10071-v4.1.0-txt software for controlling running machines

Software h/p/cosmos para graphics® cos10156-V2.6.14 software for controlling, recording and displaying running machine

parameters

floor protection mats order number

Floor protection mat 150/50 cos14005 for all h/p/cosmos running machines with running surface 150/50 cm

Floor protection mat 170/65 cos14042 for all h/p/cosmos running machines with running surface 170/65 cm

Floor protection, steel base plate (for elevation

wheels 150/50)

cos101393 floor plate for weight distribution, for models 150/50 cm

Floor protection, steel base plate (for elevation

wheels 170/65)

cos101394 floor plate for weight distribution, for models 170/65 cm

* We recommend a dedicated line 3 phase power connection (400 Volt AC3~/N/PE 50/60 Hz 16 to 32A fuse) and 3-phase device for high speed, fast

acceleration, special applications and for heavier subjects due to higher performance. For all single phase powered treadmills the natural performance limitations of single phase voltage supply apply due to the law of physics. For professional performance diagnostics, athletic training and high performance applications we strongly recommend running machines with 3-phase voltage power supply.

** Article in several sizes, variants or versions available (detailed addition of the article no.) Please quote size in your order.

*** In case of retrofitting of options and accessories, prices will be higher than indicated in the price list. Please specify device, model and serial number for

a detailed quotation.


17 Contact

For additional orders and technical enquiries please have the model type, the serial

number and the date of installation of your running machine ready. In case of any

further questions about delivery dates, service or maintenance, orders for

consumables etc., please contact the corresponding phone, fax or email for

qualified help.

Sales & service

COSMED S.r.l.

Via dei Piani di Monte Savello, 37

IT 00040 Pavona di Albano - Rome

Italy

phone +39 06 9 31 54 92

fax +39 06 9 31 54 92

email [email protected]

Headquarters of manufacturer

h/p/cosmos sports & medical gmbh

Am Sportplatz 8


Germany

phone +49 18 05 16 76 67

fax +49 18 05 16 76 69

[email protected]

www.h-p-cosmos.com

Building 1 (top picture)

h/p/cosmos development & production

Am Sportplatz 8


Building 2 (picture below)

h/p/cosmos sales & service

Feldschneiderweg 5


manual cosmed treadmill ergometer en

Documents