mandatory disclosures for year 2020-21 name of the

Mandatory Disclosures for Year 2020-21

Name of the Institution (Address including Telephone, Mobile, E-Mail)

Government Engineering College, Bhuj

Near Uma Nagar, New Raval Vadi Relocation Site,

Mirzapar Road, Bhuj-Kutch

2832231164

[email protected]

Name and Address of the Principal (Address including Telephone, Mobile, E-

Mail)

Prof (Dr.) Pravin Punjalal Rathod

Mobile Number: 9429100699

STD code: 2832 Land Phone Number: 231164

Email: [email protected]

Name of the affiliating University

Gujarat Technological University

Address: GJ SH 41, near Visat Three Roads, Nigam Nagar,

Chandkheda, Ahmedabad, Gujarat 382424

Phone: 079 2326 7521

Anti-Ragging Committee

Convener Members

Prof (Dr.) B N Suthar

Prof. M R Vithlani

Prof. D P Majethiya

Prof. M K Kathiriya

Prof M K Bhatt

Prof H C Patel

Prof I H Dave

Prof D M Patel

Internal Complaint Committee

Convener Members

Prof H S Syed

Prof. K A Sonagara

Prof. A M Buddhabhati

Prof. Y N Mansuri

Prof Alvina Patel

Mrs. S V Ramani

Mrs M P Savaliya

SC/ST Committee

Convener Members

Prof(Dr.) P P Rathod

Prof. P H Rana

Prof. M A Chaudhari

Prof. H G Chaudhari

Prof Jinal Y Patel

IQAC Committee

Chairman Prof(Dr.) P P Rathod

Coordinator Prof(Dr.) K V Modi, Prof(Dr.) P H Rana, Prof Shivam Kapoor

and Prof W J Koshi

Co-coordinator Prof R K Mevada

Professor/Asso Prof/Asst Prof Prof M B Jhala, Prof P V Savaliya, Prof D J Patel

Representative of Local Society Mr David Satish Khantu

Administrative Officer Prof R B Raval, Prof D A Vaishnav

Alumni Mr. Ajit Yadav

Student Mr Milan Modhvadiya

Industrialist Mr Milan Bhai

Parents Mr Ghanshyam Jethi, Mrs Priyaben Jethi

Programmes

Programme: Engineering and Technology

Sr

No. Course Name Level Affiliating Intake 2020-21

Status of NBA

Accreditation

1 CIVIL ENGINEERING UG GTU 60 NOT ACCREDITATED

2 ELECTRONICS &

COMMUNICATION ENGINNERING UG GTU 0 NOT ACCREDITATED

3 ELECTRICAL ENGINEERING UG GTU 60 NOT ACCREDITATED

4 ENVIRONMENTAL ENGINEERING UG GTU 30 NOT ACCREDITATED

5 MECHANICAL ENGINEERING UG GTU 60 NOT ACCREDITATED

6 MINING ENGINNERING UG GTU 30 NOT ACCREDITATED

7 CHEMICAL ENGINEERING UG GTU 60 NOT ACCREDITATED

8 ELECTRICAL ENGINEERING PG GTU 18 NOT ACCREDITATED

9 MECHANICAL (IC ENGINE &

AUTOMOBILE ENGINEERING) PG GTU 18 NOT ACCREDITATED

Profile of Vice Chancellor/ Director/ Principal/ Faculty

Prof. (Dr.) Pravin P Rathod

In charge Principal


E-mail : [email protected]

Mobile: 9429100699

EDUCATION

Ph. D. 2006-2010

Indian Institute Of technology Roorkee (Uttarakhand)

Thesis title: “Condensation of Refrigerants over Single Horizontal Integral-Fin Tubes”

Guide: Prof. (Dr.) R. P. Sharma

M.E. in Mechanical Engineering 1995-1997

The M.S.University of Baroda, Vadodara

B.E. in Mechanical Engineering 1991-1994

Lukhadhirji Engineering College, Morbi - 363641, Gujarat

TEACHING EXPERIENCE

Professor 2015 to present


Associate Professor 17-10-2010 to 2015

Government Engineering College, Valsad

Lecturer 28-06-1999-TO-16-7-2010

Government Engineering College, Bhuj (Kachchh), Gujarat

Lecturer 1997-1999

Faculty of Technology & Enginering,The M.S.University of Baroda,Vadodara,Gujarat

PROFESSIONAL EXPERIENCE

1994-95 as a maintenance engineer in Rishiroop rubber (International) Limited, Ankleswar,

Gujarat

FIELDS OF RESEARCH INTEREST

Heat Transfer & Thermal Engineering

TECHNICAL SKILLS

Languages: C, basics of C++

Software Packages:MS OFFICE, AUTOCAD, BASICS OF PRO-E

Operating Systems: Windows XP, 2000,95/98/NT,Vista,7,8 and MS-DOS

RESEARCH PROJECTS

--------

Books / Book Chapter

_______

PATENTS

1. Pandya Jay K., Bhatt Nirav M. and Dr. Pravin P. Rathod, “COMPOSITE CAM” INDIAN

Patent Application Number 1698/MUM/2013 (Provisional Specification)

PROFESSIONAL MEMBERSHIPS

Life Member, Indian Society for Technical Education-LM25774

SUBJECT TAUGHT

Research Skill

Automobile maintenance and pollution control

Heat transfer

I.C. Engine and automobile technology

Advanced thermodynamics and heat transfer

Chemical Engineering Department

Prof. AMIT N ZALA

Assistant Professor




AICTE Unique id: 1-2376287954

Work Experience Teaching:- 6 years & 5 months.

EDUCATION

M.E. in Chemical Engineering (CAPD) July 2014

L. D. College of Engineering, Ahmedabad

B.E. in Chemical Engineering June 2012

V.V.P. Engineering College, Rajkot

TEACHING EXPERIENCE

Assistant Professor 27-10-2014 to present



Simulation and optimization

TECHNICAL SKILLS

Computer Aided Process Design packages: CHEMCAD.

Programming languages: Scilab

Other: Windows OS, Microsoft Office.

SUBJECT TAUGHT

mailto:[email protected]

Fluid Mechanics

Chemical Engineering Maths

Process Control

Computer Aided Process Synthesis

Process Modelling, Simulation and optimization

Transport Phenomena

Name : KANZARIYA REKHA KARSHANBHAI

Date of Birth : 4TH DEC 1991

AICTE Unique id : 1-4619743034

Education Qualifications : MASTER DEGREE(GENERAL CHEMICAL

ENGINEERING)

Work Experience

Teaching : 4YR

Research : 0

Industry : 0

Others : 0

Area of Specialization : 0

Courses taught at :

Research guidance

No. of papers published in National:

International Journals:

Conferences:

Master : 0

Ph.D. : 0

Projects carried out : 0

Patents :0

Technology Transfer :0

Research Publications :0

No. of Books published :0

Name : KRUNAL SURESHBHAI

RAMANANDI

Date of Birth : 24/09/1989


Education Qualifications : M. E. CHEMICAL

Work Experience

Teaching : 7.5 years

Research : Nil

Industry : Nil

Others : Nil

Area of Specialization : Computer aided process design

Courses taught at : B. E. Chemical

Research guidance

No. of papers published in National: 00

International Journals: 00

Conferences: 01

Master : 00

Ph.D. : 00


Patents : 00

Technology Transfer : 00

Research Publications : 00

No. of Books published : 00

sport Size

photograph

Name :SONALBEN BACHUBHAI PRAJAPATI

Date of Birth :20/05/1987


Education Qualifications : M.E in Chemical Engineering

Work Experience

Teaching : 3 years 4 months

Research : NA

Industry : 3 year 5 months

Others :

Area of Specialization : Chemical Reaction Engineering, Process Equipment Design,

Thermodynamics

Courses taught at : CRE-I, PED-I,PED-II, HT, CET-I, CET-II

Research guidance

No. of papers published in National:NA

International Journals:NA

Conferences:1

Master :

Ph.D. :

Projects carried out : working on SSIP Project

Patents :

Technology Transfer :

Research Publications :

No. of Books published :

Latest

Passport

Size

photograph

Name : Williams J. Koshy

Date of Birth :15/02/1989


Education Qualifications : ME ( Chemical )

Work Experience : 7 yrs

Teaching : 6

Research : 0

Industry : 0

Others : 1

Area of Specialization : Mass Transfer Operations, Wastewater treatment

Courses taught at : MTO-I, MTO-II, PRPC, PED-II, PDPE , ASP

Research guidance

No. of papers published in National: 0


Conferences: 1

Master : 0

Ph.D. : 0


Patents :0

Technology Transfer :0

Research Publications :0

No. of Books published :0

assport

Size

photograp

h

Name : Dr. Imran H. Khan

Date of Birth : 14/02/1984


Education Qualifications : Ph.D.

Work Experience

Teaching : 04 Years

Research : 02 Years

Industry : NIL

Others : NIL

Area of Specialization : Organic Medicinal Chemistry

Courses taught at : Chemistry, Applied Chemistry, Unit Process and Chemical

Technology

Research guidance

No. of papers published in National:02


Conferences: 16

Master : 00

Ph.D. : 00


Patents : 00

Technology Transfer : 00

Research Publications : 08

No. of Books published : 00

Name :Rupal R. Patel

Date of Birth :17-11-1972

AICTEUnique id :

Education Qualifications :B.E. (Chemical Engg.))

Work Experience

Teaching : 25 Years

Research : NA

Industry : NA

Others : NA

Area of Specialization : Process heat transfer,

Coursestaughtat :FFO.MO, PHT,PRPC,SFO,CET-I,CRE-I,CPI-I,CPI-II

Research guidance

No. of paperspublished in National: 1

InternationalJournals: NA

Conferences: NA

Master :

Ph.D. :

Projects carriedout :

Patents : 1

TechnologyTransfer :

Research Publications :

No. of Bookspublished :

Civil Engineering Department

Name MARVANIYA PRAKASH VALLABHBHAI Date of Birth 15/08/1960 Unique id GECB/GEO/01 Education Qualifications M.Sc Work Experience Teaching 31 years 3 months Research 00 Industry 00 others 7 years 6 months Area of Specialization Geology

CoursestaughtatDiploma/PostDiploma/UnderGraduate/PostGraduate/PostGraduateDiploma Level UNDERGRADUATE

Research guidance- nil No. of paperspublished in National/InternationalJournals/Conferences Masternil Ph.D.nil Projects Carried out nil Patentsnil TechnologyTransfernil Research Publicationsnil No. of Bookspublishedwith details nil

Name : Mehul Ramniklal Vithalani Date of Birth : 29-09-1978 Unique id : GECB/CED/10 Education Qualifications: M.E. (Water Resources Management) Work Experience Teaching : 15 Years Research : 00 Years Industry : 00 Years others : 00 Years Area of Specialization : Water Resources Management Courses taught at: Under Graduate Research guidance : 00 No. of papers published in National/International Journals/Conferences : 03 Master : 12 Ph.D. :00 Projects Carried out : 00 Patents : 00 Technology Transfer : 00 Research Publications : 00 No. of Books published with details : 00

Name : DEVANG P. MAJITHIYA Date of Birth : 15-12-1980 Unique id : GECB/CIVIL/03 Education Qualifications: M.E. ( HIGHWAY & TRANSPORTATION

Engineering) Work Experience Teaching : 10 Years Research : 00 Years Industry : 10 Years others : 00 Years

Area of Specialization : TRANSPORTATION PLANNING Courses taught at: Under Graduate Research guidance : 00 No. of papers published in National/International Journals/Conferences : 03 Master : 00 Ph.D. :00

Projects Carried out : 00 Patents : 00 Technology Transfer : 00 Research Publications : 00 No. of Books published with details : 00

Name :KuldipBiharilal Patel Date of Birth :02-06-1984 Unique id :GECB/CED/05 Education Qualifications: M.E. (Water Resources Engineering) Work Experience Teaching :12 Years 6 Month Research :00 Years Industry :00 Years others :00 Years Area of Specialization :Water Resources Engineering Courses taughtat: UnderGraduate Research guidance :00 No. of paperspublished in National/InternationalJournals/Conferences : 21 Master : 00 Ph.D. :00 Projects Carried out :00 Patents :00 TechnologyTransfer :00 Research Publications :00 No. of Bookspublishedwith details :02

Name:IshaHardikkumar Dave Date of Birth: 17-11-1982 Unique ID :GECB/CED-8 Education Qualifications: M.Tech. Civil Work Experience Teaching :08 Years Research :00 Years Industry :00 Years others :00 Years Area of Specialization :Urban Planning Courses taughtat: Under Graduate Research guidance :00 No. of paperspublished in National/InternationalJournals/Conferences : 00 Master : 00 Ph.D. :00 Projects Carried out :00 Patents :00 TechnologyTransfer :00 Research Publications :00 No. of Bookspublishedwith details :00

Name:Jay Hiranand Brahmkhatri Date of Birth: 07-11-1986 Unique ID :GECB/CED-09 Education Qualifications: M.E. (Highway and Transportation Engineering) Work Experience Teaching :10 Years Research :00 Years Industry :00 Years others :00 Years Area of Specialization :Traffic Engineering Courses taught at: Under Graduate Research guidance :00 No. of paperspublished in National/InternationalJournals/Conferences : 00 Master : 00 Ph.D. :00 Projects Carried out :00 Patents :00 TechnologyTransfer :00 Research Publications :00 No. of Bookspublishedwith details :00

Name : Tushar Hematlal Bhoraniya Date of Birth : 24-06-1980 Unique id : GECB/AMD-2 Education Qualifications: M.E. (Structural Engineering) Work Experience Teaching : 15 Years Research : 00 Years Industry : 03 Years others : 00 Years Area of Specialization : Structural Engineering Courses taught at: Under Graduate Research guidance : 00 No. of paperspublished in National/InternationalJournals/Conferences : 01 Master : 00 Ph.D. :00 Projects Carried out : 00 Patents : 00 TechnologyTransfer : 00 Research Publications : 00 No. of Bookspublishedwith details : 00

Name : Hiteshkumar Chhaganbhai Patel Date of Birth : 11-06-1984

Unique id : GECB/APM/03 Education Qualifications: M.E. (Geotechnical Engineering) Work Experience Teaching : 10 Years Research : 00 Years Industry : 01 Years others : 00 Years Area of Specialization : Geotechnical Engineering Courses taught at: Under Graduate Research guidance : 00 No. of papers published in National/International Journals/Conferences : 00 Master : 00 Ph.D. :00 Projects Carried out : 00 Patents : 00 Technology Transfer : 00 Research Publications : 00 No. of Books published with details : 00

Name: Mistry Maulik Jayendrabhai Date of Birth: 22.08.1987 Unique id: GECB/AMD-4 Education Qualifications: M.Tech (Civil-Structural Engineering) Work Experience Teaching: 09 Years Research:00 Years Industry: 02 Years others: 00 Years Area of Specialization: Structural Engineering Coursestaughtat: UnderGraduate Research guidance: 00 No. of paperspublished in National/InternationalJournals/Conferences: 01 Master: 00 Ph.D.: 00 Projects Carried out: 00 Patents: 00 TechnologyTransfer: 00 Research Publications: 00 No. of Bookspublishedwith details: 00

Electrical Engineering

1] Name : Prof.(Dr.) B.N. Suthar Date of Birth : 01/09/1971 Unique id : 1-3582117677 Education Qualifications : B.E. /ME/PHD Work Experience Teaching : 26 Research : 13 Industry : NA Others : NA Area of Specialization : Electrical Engineering Courses taught at : Under Graduate and Post Graduate Level Research guidance No. of papers published : National - 23

: International Journals - 20 : Conferences - 11

Master : 21 (Student guided) Ph.D. : 07 Projects carried out : 01 Patents : NIL Technology Transfer : NIL Research Publications : 5(2+3) No. of Books published : 01 2] Name : Prof.M.B. Jhala Date of Birth : 15/10/1972 Unique id : 1-1516332640 Education Qualifications : B.E. /M.E. Work Experience Teaching : 25 Research : NA Industry : NA Others : NA Area of Specialization : Electrical Engineering Courses taught at : Under Graduate and Post Graduate Level Research guidance No. of papers published :5 Master : 7(Student guided) Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

3] Name : Prof. (Dr.) P. L. Kamani Date of Birth : 05/04/1975 Unique id : 1-1489660114 Education Qualifications : B.E. Work Experience Teaching : 16 Research : NA Industry : NA Others : NA Area of Specialization : Electrical Engineering Courses taught at : Under Graduate and Post Graduate Level Research guidance No. of papers published : National - 2


Master : 5 (Student guided) Ph.D. : Nil Projects carried out : 01 Patents : NIL Technology Transfer : NIL Research Publications : 12 No. of Books published : 01

4] Name : Prof. R.D. Bhagiya Date of Birth : 10/06/1978 Unique id : 1-2300309963 Education Qualifications : B.E. Work Experience Teaching : 16 Research : NA Industry : 4 Others : NA Area of Specialization : Electrical Engineering Courses taught at : Under Graduate and Post Graduate Level Research guidance No. of papers published : NIL Master : 2 (Student guided) Ph.D. : NA Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

5] Name : Prof. M.K. Kathiria Date of Birth : 09/03/1975 Unique id : 1-2974213669 Education Qualifications : B.E. /M.E. Work Experience Teaching : 18 Research : NA Industry : NA Others : NA Area of Specialization : ELECTRICAL POWER SYSTEM Courses taught at : Under Graduate and Post Graduate Level Research guidance No. of papers published : 4 Master : NIL Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

6] Name : Prof. R.K. Patel Date of Birth : 26/06/1974 Unique id : 1-7519578844 Education Qualifications : B.E./ M.E. Work Experience Teaching : 23.5 YEAR Research : NA Industry : 1.5 YEAR Others : NA Area of Specialization : Power System Courses taught at : Under Graduate Research guidance No. of papers published : 2 Master : 5 Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

7] Name : PROF. (Ms) K. A. SONAGRA

Date of Birth : 07/10/1985 Unique id : 1-764879640 Education Qualifications : B.E. /M.E. Work Experience Teaching : 12.8 Research : NA Industry : NA Others : NA Area of Specialization : Electrical Engineering Courses taught at : Under Graduate and Post Graduate Level Research guidance No. of papers published : 6 JOURNALS Master : 3 Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : INTERNATIONAL CONFERENCE-1 No. of Books published : NIL

8] Name : PROF. M. A. CHAUDHARI Date of Birth : 03/02/1988 Unique id : 1-3582117588 Education Qualifications : B.E. & M.E. (Elect. Engg.) Work Experience Teaching : 5 years Research : 0 year Industry : 0 year Others : PRIVATE COLLEGE: AS ASST. PROF. : 4.5 YEAR Area of Specialization : Electrical Engineering Courses taught at : Under Graduate Level & Post graduate level Research guidance No. of papers published in National (0)/ International Journals (6) / International Conferences (0) Master : 3 Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : 0

9] Name : PROF. V. N. CHAUDHARI Date of Birth : 02/03/1967 Unique id : 1-3582117635 Education Qualifications : B.E. Work Experience Teaching : 05 Year Research : NA Industry : NA Others : NA Area of Specialization : Power Electronics and

Electrical Drives Courses taught at : Under Graduate Level Research guidance No. of papers published : NIL Master : NIL Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

10] Name : Prof. R.T. Patel Date of Birth : 08/03/1988 Unique id : 1-3581724453 Education Qualifications : B.E. /M.E. Work Experience Teaching : 9 YEAR Research : NA Industry : NA Others : NA Area of Specialization : ELECTRICAL ENGINEERING( INDUSTRIAL

ELECTRONICS) Courses taught at : Under Graduate Research guidance No. of papers published : NIL Master : NIL Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

11] Name : PROF. G. V. BHATT Date of Birth : 18/07/1992 Unique id : 1-4713644839 Education Qualifications : B.E. /ME. Work Experience Teaching : 3 YEAR Research : NA Industry : 3 YEAR Others : NA Area of Specialization : Electrical Engineering Courses taught at : Under Graduate Research guidance No. of papers published : NIL Master : NIL Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

12] Name : PROF. N. H. ADROJA Date of Birth : 11/06/1987 Unique id : 1-4713968216 Education Qualifications : B.E. /M.E. Work Experience Teaching : 10 YEAR Research : NA Industry : NA Others : NA Area of Specialization : Electrical Engineering Courses taught at : Under Graduate Research guidance No. of papers published : 9 Master : NIL Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

13] Name : PROF. B. D. PATEL Date of Birth : 02/03/1967 Unique id : 1-4714726733 Education Qualifications : B.E. / M.E. Work Experience Teaching : 3 YEAR Research : NA Industry : NA Others : NA Area of Specialization : Electrical Engineering Courses taught at : Under Graduate Research guidance No. of papers published : NIL Master : NIL Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

14] Name : PROF. V. B. RATHOD Date of Birth : 28/01/1988 Unique id : 1-4734862344 Education Qualifications : B.E. /M.E. Work Experience Teaching : 2.8 YEAR Research : NA Industry : NA Others : PRIVATE COLLEGE: AS ASST. PROF. : 4.10 YEAR Area of Specialization : Electrical Engineering Courses taught at : Under Graduate Research guidance No. of papers published : NIL Master : NIL Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

15] Name : PROF. D. M. PATEL Date of Birth : 15/02/1988 Unique id : 1-7535200418 Education Qualifications : B.E. /M.E. Work Experience Teaching : 10 YEAR Research : 3 YEAR Industry : NA Others : NA Courses taught at : Under Graduate Research guidance No. of papers published : 4 Master : NIL Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

16] Name : PROF. R. B. CHAUDHARY Date of Birth : 05/05/1991 Unique id : 1-4712649874 Education Qualifications : B.E. /M.E Work Experience Teaching : 2.5 YEAR Research : NA Industry : NA Others : NA Area of Specialization : Electrical Power System Courses taught at : Under Graduate and Post Graduate Level Research guidance No. of papers published : 5 Master : NIL Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

18] Name : PROF. H. K. VAGHELA

Date of Birth : 27/11/1991 Unique id : 1-4730293864 Education Qualifications : B.E. /M.E. Work Experience Teaching : 5 YEAR Research : NA Industry : NA Others : NA Area of Specialization : Electrical Power System Courses taught at : Under Graduate Research guidance No. of papers published :1 Master : NIL Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

Electronics & Communication Engineering

Name :Nakum Suresh Date of Birth :15/12/1977 Unique id : 1-1490688089

Education Qualifications : B.E. (ECE) Work Experience Teaching : 20 Research : 1 Industry : 1 others : 0

Area of Specialization : Signal Processing Courses taught at : Under Graduate Level Research guidance No. of papers published in National (2)/ International Journals-5/ Conferences(1) Master : Signal Processing Ph.D. : Registered(GTU)

Projects Carried out : - Patents :- Technology Transfer :- Research Publications :8(5+2+1) No. of Books published :0

Name : Maharshi K Bhatt Date of Birth :30/11/1988 Unique id : 1-766353680 Education Qualifications : M.E. (CSE) Work Experience Teaching : 9 years 6 months Research : 0 years Industry : 1 year 5 months others : 0

Area of Specialization : Wireless Communication Courses taught at : Under Graduate Level Research guidance No. of papers published in National/ International Journals/ Conferences: 7 Master : 0 Ph.D. : 0

Projects Carried out : 0 Patents : 0 Technology Transfer : 0 Research Publications : 0 No. of Books published : 0

Name : Krunal K. Patel Date of Birth : 24.10.1986 Unique id : 1-4576633588 Education Qualifications : Ph.D(Pursuing), M.E. (Electronics and

Telecommunication), B.E. (Electronics and Telecommunication) Work Experience Teaching : 5.5 Research : - Industry : - others : -

Area of Specialization : Electronics and Telecommunication, Antennas, Microwaves

Courses taught at : Antennas and Wave Propagation, Electromagnetic Theory, Microwave Engineering, Network Theory

Research guidance No. of papers published in National/ International Journals/ Conferences: 5 Master : - Ph.D. : -

Projects Carried out : - Patents : - Technology Transfer : Research Publications : 5 No. of Books published : -

Name :YagneshKumar Jayantilal Parmar Date of Birth :04/08/1987 Unique id : 1-3746067202 Education Qualifications :BE EC,ME EC,research scholar at GTU Work Experience Teaching :9 year Research : Industry : others :

Area of Specialization :signal processing,antenna and wave propagation Courses taught at : Under Graduate Level Research guidance No. of papers published in National/ International Journals/ Conferences:18 Master : 05 students Ph.D. :pursuing at GTU batch 2019-20

Projects Carried out :nil Patents :nil Technology Transfer :nil Research Publications :01 No. of Books published :01

Name : DHARMENDRA HASMUKHRAY RATHOD Date of Birth : 17/05/1984 Unique id : 1-441950297 Education Qualifications : BE (EC) Work Experience Teaching : 12 YEARS and 04 MONTHS Research : NIL Industry : 05 MONTHS others : NIL

Area of Specialization : ELECTRONICS AND COMMUNICATION Courses taught at : Under Graduate Level Research guidance No. of papers published in National/ International Journals/ Conferences: NIL Master : NIL Ph.D. : NIL

Projects Carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

Name : Milankumar N Bareja Date of Birth : 27/01/1989 Unique id : 1-1489659883 Education Qualifications : M.E. (Communication Engineering) Work Experience Teaching : 8 years 2 months Research : 0 years Industry : 0 years others : 0



Name : Rakesh R Panchiwala Date of Birth : 18/10/1988 Unique id : 1-2300279563 Education Qualifications : M.E. Work Experience Teaching : 7 years 2 months Research : 0 years Industry : 0 years others : 0



Name :Bhavika Ashok bhai Vithalapara Date of Birth :22/04/1992 Unique id : 1-3363789901 Education Qualifications :ME EC Work Experience Teaching :4 years Research :1 Industry :0 others :na

Area of Specialization : Communication, Networking Courses taught at : Under Graduate Level DCN, PE Research guidance No. of papers published in National/ International Journals/ Conferences: Master :2 Ph.D. :na

Projects Carried out :na Patents :na Technology Transfer :na Research Publications :na No. of Books published :na

Name :AJAYSINGH RAVINDRASINGH BHADAURIA Date of Birth :19/02/1992 Unique id : 1-3363198041 Education Qualifications :M.Tech Work Experience Teaching :4YEAR 4 MOMTHS Research :NIL Industry :NIL others :NIL

Area of Specialization : COMMUNICATION SYSTEMS Courses taught at : Under Graduate Level Research guidance No. of papers published in National/ International Journals/ Conferences: NIL Master : NIL Ph.D. : NIL

Projects Carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : NIL No. of Books published : NIL

Name : BHAVIN BHARATBHAI PATEL Date of Birth :23/04/1992 Unique id : 1-3363878694 Education Qualifications :ME Work Experience Teaching :4 YEAR 4 MONTH Research : NIL Industry : NIL others : NIL

Area of Specialization : COMMUNICATION SYSTEM, NETWORKING Courses taught at : Under Graduate Level Research guidance No. of papers published in National/ International Journals/ Conferences: Master : 2 Ph.D. : 0


Environmental Engineering

Name : Huma S Syed Date of Birth : 02/03/1967 Unique id : 1-3568343793 Education Qualifications : B.E. (Env. Engg.) & M.E. (Env. Mngt.) Work Experience Teaching : 30 Research : NA Industry : NA Others : NA Area of Specialization : Environmental Engineering Courses taught at : Under Graduate and Post Graduate Level Research guidance No. of papers published : National - 2

: International Journals - NIL : Conferences - 3

Master : 15 (Student guided) Ph.D. : NA Projects carried out : 03 Patents : NIL Technology Transfer : NIL Research Publications : 5(2+3) No. of Books published : NIL

Name :Hardikkumar Trikamjeebhai Bhatiya Date of Birth : 22/07/1990 Unique id : 1-3561524094 Education Qualifications : B.E. (Env. Engg.) & M.E. (Env. Mngt.) Work Experience Teaching : 3 years Research : 0 year Industry : 0 year Others : 1.5 year Area of Specialization : Environmental Legislation Courses taught at : Under Graduate Level Research guidance No. of papers published in National (2)/ International Journals (0) / International Conferences (1) Master : N.A. Ph.D. : N.A. Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : 3 (2+0+1) No. of Books published : 0

Name : Shivam Kapoor Date of Birth : 24/02/1988 Unique id : 1-3560982775 Education Qualifications : B.Tech (ENV ENGG) : M.Tech (ENV ENGG) Work Experience Teaching : 4.5 Research : 3.5 Industry : 0.5 Others : NA Area of Specialization : Heavy Metal Removal from Groundwater, Sustainable

Sanitation, Environmental Impact Assessment, Bioremediation

Courses taught at : Under Graduate Level Research guidance No. of papers published : National - 1


Master : 01 (Student guided) Ph.D. : NA Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : 7(1+4+2) No. of Books published : 01 (Chapter)

Name : JINAL YASHVANTBHAI PATEL Date of Birth : 23/05/1992 Unique id : 1-3758435163 Education Qualifications : M.E. (ENV) Work Experience Teaching : 4 year 3months Research : 0 Industry : 0 Others : 0 Area of Specialization : Environmental engineering Courses taught at : Under Graduate Level Research guidance No. of papers published in National (2)/ International Journals-(0)/ Conferences (0) Master : Environmental engineering Ph.D. : NIL Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : (2) No. of Books published : 0

Mechanical Engineering

Prof. (Dr.) Pravin P Rathod

In charge Principal



Mobile: 9429100699

EDUCATION

Ph. D. 2006-2010

Indian Institute Of technology Roorkee (Uttarakhand)

Thesis title: “Condensation of Refrigerants over Single Horizontal Integral-Fin Tubes”


M.E. in Mechanical Engineering 1995-1997

The M.S.University of Baroda, Vadodara

B.E. in Mechanical Engineering 1991-1994

Lukhadhirji Engineering College, Morbi - 363641, Gujarat

TEACHING EXPERIENCE

Professor 2015 to present


Associate Professor 17-10-2010 to 2015


Lecturer 28-06-1999-TO-16-7-2010

Government Engineering College, Bhuj (Kachchh), Gujarat

Lecturer 1997-1999

Faculty of Technology & Enginering,The M.S.University of Baroda,Vadodara,Gujarat


1994-95 as a maintenance engineer in Rishiroop rubber (International) Limited, Ankleswar, Gujarat


Heat Transfer & Thermal Engineering

TECHNICAL SKILLS

Languages: C, basics of C++

Software Packages:MS OFFICE, AUTOCAD, BASICS OF PRO-E

Operating Systems: Windows XP, 2000,95/98/NT,Vista,7,8 and MS-DOS

RESEARCH PROJECTS

--------


_______

PATENTS

2. Pandya Jay K., Bhatt Nirav M. and Dr. Pravin P. Rathod, “COMPOSITE CAM” INDIAN Patent

Application Number 1698/MUM/2013 (Provisional Specification)


Life Member, Indian Society for Technical Education-LM25774

SUBJECT TAUGHT

Research Skill

Automobile maintenance and pollution control

Heat transfer

I.C. Engine and automobile technology

Advanced thermodynamics and heat transfer

Prof. (Dr.) KALPESH V. MODI

Professor and Head of Department

Mechanical Engineering Department,



[email protected]

[email protected]

Mobile: 8200875956

EDUCATION

Ph. D. April 2015

Indian Institute of Technology, Delhi

Thesis title: “Magneto-fluid Turbulence and Scaling Laws”


M.E. in Mechanical Engineering February 2002

Sardar Vallabhbhai Regional College of Engineering and Technology, Surat

B.E. in Mechanical Engineering June 1999


TEACHING EXPERIENCE

Professor 27-12-2018 to present


Associate Professor 18-09-2012 to 26-12-2018


Lecturer / Assistant professor 28-12-2004 to 17-09-2012


Lecturer 01-01-2002 to 27-12-2004

N. G. Patel Polytechnic, Bardoli, Surat

Lecturer (Adhoc) 13-03-2001 to 29-12-2001

Government Polytechnic, Chhotaudepur


C. K. Pithawala College of Engineering and Technology, Surat






-----------


Solar Energy: Performance Enhancement of Solar Thermal Devices, Solar Refrigeration and Air-

Conditioning

Mathematical Modeling: Development of Model for the Solar Thermal Devices

TECHNICAL SKILLS

Programming languages: -----

Computer Aided Design packages: -----

FEM and CFD: ------

Other: Windows OS, Microsoft Office

RESEARCH PROJECTS

--------


1) Nayi K. H. and Modi K. V., Thermal Modeling of Pyramid solar still, Solar Desalination

Technology, Green Energy and Technology, Springer, doi: 10.1007/978-981-13-6887-5_9.

PATENTS

------


Life Member, Indian Society for Technical Education

SUBJECT TAUGHT

Solar Energy Engineering

Solar Refrigeration and Air-conditioning

Computational Methods for Mechanical

Engineering

Research Skill

Advanced Thermodynamics and Heat

Transfer

Biomass Energy Conversion

Renewable Energy Engineering

Operations Research

Control Engineering

Engineering Graphics

Experimental Techniques and

Instrumentations in Thermal Engineering

Prof.(Dr.) Arvind S Sorathiya

Associate Professor




Mobile: 9879122171

EDUCATION

Ph.D in Mechanical Engineering Sep.2017

Rai University Ahmedabad

M.E. in IC /Automobile June 2008

L.D.Engineering College Ahmedabad (Gujarat University)


L.E. Engineering ,Morbi (Gujarat) Saurastra University

TEACHING EXPERIENCE

Associate Professor 14-07-2010 to continue…


Lecturer / Assistant professor 2/8/2008 to 12/6/2009

Government Engineering College, Morbi

Lecturer 21/3/2000 to 1/8/2008



-----------


Thermal Engineering ,Internal Combustion Engine and Automobile Engineering

TECHNICAL SKILLS

Windows OS, Microsoft Office

SUBJECT TAUGHT

Elements of Mechanical Engineering

Thermal Hydro Prime Movers

Research Skill

High Speed Diesel Engine

Automobile Maintenance and Pollution

Control

Automotive Aerodynamics and Safety

Alternate Energy and sources



Internal Combustion Engine

Automobile Engineering

Power Plant Engineering

RUSHI BHARATRAY RAWAL

Assistant Professor




Mobile: 9033482952

EDUCATION

M.E – MECHANICAL ( Thermal Science ) June 2012

FACULTY OF TECHNOLOGY & ENGINEERING, M.S. UNIVERSITY, BARODA

B.E. Mechanical Engineering February 2000

BVM ENGINEERING COLLEGE, VALLABH VIDYANAGAR, ANAND.

TEACHING EXPERIENCE

Assistant professor 19-12-2013 to present


Lecturer / Assistant professor 16-12-2004 to 18-12-2013

Lukhdhirji Engineering College, Morbi

Lecturer 01-09-2001 to 14-12-2004

Sardar Vallabhbhai Patel Institute of Technology, Vasad


Sardar Vallabhbhai Patel Institute of Technology, Vasad


Nil -


Thermal Fluid Science

TECHNICAL SKILLS

Programming languages: C/ C++ and MATLAB

Computer Aided Design packages: AUTOCAD, SIEMENS NX-10



Nil


Life Member, Indian Society for Technical Education – LM90636

SUBJECT TAUGHT


Fluid Mechanics

Engineering Thermodynamics

Heat transfer

Refrigeration and Air Conditioning

Computational Methods for Mechanical Engineering

Advanced Thermodynamics and Heat Transfer

Advanced Gas Dynamics

Prof. KAMLESH R. DER

Asst. Professor




Mobile: 9925426246

EDUCATION

M.E. in CAD/CAM February 2015

Atmiya Institute of Technology and Science, Rajkot


Lakhdirsinh Engineering College, Morbi

TEACHING EXPERIENCE

Asst. Professor 12-12-2013 to present


Asst. Professor 01/04/2010 to 11-12-2013


Lecturer (Adhoc) 05/09/2008 to 31/03/2010

Government Polytechnic, Junagadh


Government Polytechnic, Jamnagar


Dr. J N Mehta Government Polytechnic, Amreli


Atul Auto Ltd., Rajkot 14/04/1996 to 22/06/1998


CAD/ CAM

Machine Design

Manufacturing Process

TECHNICAL SKILLS

Programming languages: C

Computer Aided Design packages: Auto Cad, Creo, Solid works

FEM and CFD: ------


RESEARCH PROJECTS

-----



SUBJECT TAUGHT


Elements of Mechanical Engineering

Thermodynamics

Fluid Mechanics & Hydraulics of Machine

Theory of Machine

Kinematics of Machine

Machine Design & Industrial Drafting

Thermal Engineering

Manufacturing Technology

Production Technology

Refrigeration & Air-conditioning

Computer Aided Design

Operations Research

Prof. VINOD M. MAKWANA

Assistant Professor




Mobile: 9510330661

EDUCATION

M.E. in Mechanical Engineering July 2011

Faculty of Technology, M.S. University, Baroda

B.E. in Mechanical Engineering July 1999

L.D.C.E., Gujarat University, Ahmedabad

TEACHING EXPERIENCE



Lecturer 26-03-2010 to 18-02-2011

Government Polytechnic, Ahmedabad


L.D.C.E., Ahmedabad

Lecturer 22-06-2006 to 03-10-2008

P.I.E.T., Waghodia

Lecturer 05-01-2006 to 20-06-2006

L.C.I.T., Bhandu


N.M.G.P., Ranpur


Quality Engg. 01-01-2000 to 31-12-2000

Rekha Textiles M/C Pvt.Ltd., Wadhwan


Thermal Science : Performance Enhancement of Power Plant

Automobile : Performance Enhancement of IC engine automobile vehiclet

Mathematical Modeling: Development of Model to know performance of 4 stroke diesel engine

TECHNICAL SKILLS


Computer Aided Design packages: -----

FEM and CFD: ------


RESEARCH PROJECTS

--------


------.

PATENTS

------



SUBJECT TAUGHT

Automobile Engineering

Power Plant Engineering

Design of Machine Element

Fluid Mechanics


Dynamics of Machine

Biomass Energy Conversion

Experimental Techniques and

Computational Methods for Mechanical

Engineering

Energy Conservation Management

Advanced Thermodynamics and Heat

Transfer

Instrumentations in Thermal Engineering

Prof. Dharmendra Jerambhai Patel

Assistant Professor,




Mobile: 9427334484

EDUCATION

Ph. D. Pursuing

Gujarat Technological University

Thesis title: “Performance analysis of bio fuel as a cutting fluid on VMC”

Guide: Prof. (Dr.) Pravin P. Rathod

M.E. in Mechanical Engineering June 2009

C. U. Shah College of Engineering and Technology, wadhvancity

Saurashtra University



TEACHING EXPERIENCE



Assistant Professor 18-02-2010 to 20-04-2011

Takshshila College of Engineering and Technology

Lecturer (Regular) 22-08-2006 to 17-02-2010

C. U. Shah Technical Institute of diploma studies, Wadhwancity

Lecturer (Regular) 01-07-2003 to 21-08-2006

Shree N. M. Gopani polytechnic, Ranpur


Shree N. M. Gopani Polytechnic, Ranpur


-----------


Manufacturing

TECHNICAL SKILLS

Pro-e

CNC Programming

FEM

CATIA


RESEARCH PROJECTS

--------


--------

PATENTS

------


Life Member, Indian Society for Technical Education , LM:38685

SUBJECT TAUGHT


Basics of Mechanical Engineering

Kinematics and Theory of Machines


Computer Aided Manufacturing

Computer Integrated Manufacturing



Metal Forming Analysis

Manufacturing Process-I

Manufacturing Process- II

Prof. PRADIP V. SAVALIA

Asst. Professor




Mobile: 9714117822

EDUCATION

M.E. in Mechanical (General) November 2004

SVNIT, Surat

B.E. in Production Engineering July 2002

B. V. M., V. V. Nagar (Sardar Patel University, V. V. Nagar)

TEACHING EXPERIENCE

Asst. Professor 16-02-2016 to present


Asst. Professor 04/05/2011 to 15-02-2016

Government Engineering College, Surat

Lecturer 01/06/2006 to 03/05/2011

N. G. Patel Polytechnic, Bardoli


Shahlon Industries (P) Ltd., Surat 01/01/2005 to 31/05/2006


CAD/ CAM

Machine Design


TECHNICAL SKILLS

Programming languages: C, C++

Computer Aided Design packages: Auto Cad, Creo, Solid Edge

FEM and CFD: Ansys


RESEARCH PROJECTS

-----



SUBJECT TAUGHT


Fundamental of Machine Design




Operations Research


Machine Design-II

Prof. DARSHAN A. VAISHNAV

Assistant Professor




Mobile: 9428623162

EDUCATION

M.Tech. (CAD/CAM) October 2009

Institute of Technology, Nirma University.

B.E. in Mechanical Engineering July 2007

Gujarat University, Ahmedabad

TEACHING EXPERIENCE

Lecturer 23-07-2009 to 30-01-2010

U.V. Patel College of Engineering, Kherva.


Institute of Diploma Studies, Nirma University, Ahmedabad.

Assistant Professor 01-02-2012 to Till Date

Government Engineering College, Bhuj.


Mechanical Engineering Design, Robotics.

TECHNICAL SKILLS


Computer Aided Design packages: Pro/Engineer, Catia

FEM and CFD: Ansys




SUBJECT TAUGHT

Material Science & Metallurgy

Mechanical Measurement & Metrology

Theory of Machines

Dynamics of Machinery



Control Engineering

Prof. MONIR.M.CHANDRALA

Assistant Professor




Mobile: 9662034909

EDUCATION

M.Tech. in Machine Design June 2013

Oriental Institute of Science & Technology- Bhopal


C.U.Shah college of Engineering & Technology, Wadhwan

TEACHING EXPERIENCE




-----------


Solar Energy

TECHNICAL SKILLS

Computer Aided Design packages: Pro-e



---------------------



SUBJECT TAUGHT


Metal Forming Analysis

Machine Design


Material Science & Metallurgy

Mechanical Measurement & Metrology


Design of Machine Elements

Prof. BRIJESH K. GOTAWALA

Assistant Professor




Mobile: 9428139015

EDUCATION

M.Tech. in CAD/CAM Aug 2010

S. V. National Institute of Technology, Surat

B.E. in Mechanical Engineering Jun 2002

S. V. Regional College of Engg & Tech, Surat

TEACHING EXPERIENCE




Dr. S. & S. S. Ghandhy Govt. Engg. College, Surat

Lecturer/ Assistant Professor 01-10-2005 to 27-06-2016

Shri S’ad Vidya Mandal Institute of Tech, Bharuch

Teaching Assistant 03-02-2005 to 30-06-2005

Sardar Vallabhbhai National Institute of Technology, Surat


One-year Apprenticeship at Batliboi & Co., Ltd, Udhna, Surat 01-02-2003 to 31-01-2004


Computer-aided Design & Manufacturing: Simulation-based design and Computer-aided Engineering

TECHNICAL SKILLS

Programming languages: C/C++

Computer Aided Design packages: AutoCAD, ProEngineer, Autodesk Inventor

FEM and CFD: ------



NIL



SUBJECT TAUGHT


Engineering Drawing/ Machine Drawing

Basic Mechanical Engg

Elements of Machine Design

Computer-aided Design

Computer-aided Manufacturing

Dynamics of Machinery

Theory of Machines

Prof. PRITESH K. JARADI

Assistant Professor




Mobile: 8141018628

EDUCATION

M.Tech in Fluid and Thermal Engineering (Mechanical) May 2012

Indian Institute of Technology Guwahati Assam


Birala Vishvakarma Mahavidhyalaya, V V Nagar Gujarat

TEACHING EXPERIENCE

Assistant professor 10-06-2016 to Present

Government Engineeirng College Bhuj

Assistant professor (Contractual) 21-10-2013 to 09-06-2016

Government Engineeirng College Bhuj

Assistant professor 18-06-2012 to 15-07-2013

HJD Kera Kachchh


Graduate Apprentice Trainee (GAT) 17-07-2008 to 30-05-2009

Dresser-Rand India Pvt Ltd, Ahmedabad


Solar Energy

Thermal Energy

Fluid Engineering

TECHNICAL SKILLS

Programming languages: ----- C

Computer Aided Design packages: ----- Pro-E


RESEARCH PROJECTS

--------

PATENTS

------

SUBJECT TAUGHT

Fluid Power Engineering

Refrigeration and Air-conditioning

Advanced Thermodynamics and Heat Transfer


Basic Mechanical Engineering


Engineering Thermodynamics

Fluid Mechanics

Prof. YASMIN N. MANSURI

Assitant Professor of Department




Mobile: 9428895401

EDUCATION

B.E. in Production Engineering Nevember 1995

Lukhdhirji Engineering College, Morbi.

TEACHING EXPERIENCE

Lecturer / Assistant professor(Adhoc) 07-03-2000 to present

Government Engineering College,Bhuj.

Lecturer/Assistant professor (Adhoc) 10-02-1999 to 06-03-2000

Government Engineering College,Modasa.

Lecturer/Assistant professor (Adhoc) 02-07-1998 to 09-02-1999

Lukhdhirji Engineering College,Morbi.


----nil----


-----nil---

TECHNICAL SKIL

------nil----

RESEARCH PROJECTS

----nil-----


----nil------

SUBJECT TAUGHT

Metal forming analysis

Production technology

Manufacturing process

Material technology

Kinematis of machine

management

Engineering Economics

Industerial Engineering

Enterpreneurship


Prof. HIMANSHU G CHAUDHARI

Assistant Professor




Mobile: 8980003691

EDUCATION

M.E. in Jet Propulsion and Gas Turbine Plant June 2011

Oriental Institute of Science & Technology- Bhopal


L E College Morbi

TEACHING EXPERIENCE




-----------


--------------------------

TECHNICAL SKILLS



---------------------

SUBJECT TAUGHT

MACHINE DESIGN

THEORY OF MACHINES

I C ENGINE

HEAT TRANSFER

ENGINEERING GRAPHICS

Prof. Vishwanath K Patel

Assistant Professor (Contractual)




Mobile: 9925305702

EDUCATION

M.Tech. in Mechanical Engineering December 2012

Mewar University,Chittorgarh,Rajasthan

B.E. in Mechanical Engineering May 2005

C.U.Shah College Of Engineering & Technology,Wadhawan City,Gujarat

TEACHING EXPERIENCE

Assistant professor 7-3-2013 to Present



-----------


______

TECHNICAL SKILLS

Excel, Microsoft Office

RESEARCH PROJECTS

--------

Prof. JIGNESHKUMAR R CHAUDHARI

Assistant Professor




Mobile: 9727205811

EDUCATION

M.E. in Mechanical Engineering June 2013

Government engineering college valsad


L D College of engineering Ahmedabad

TEACHING EXPERIENCE

Asst Professor 25-10-2013 to present



-----------


------------

TECHNICAL SKILLS



---------------------

SUBJECT TAUGHT

Energy conservation and management Engineering Thermodynamics

Power plant engineering

Machine Design

Automobile engineering

Basic mechanical engineering

Design of Machine Elements

Mining Engineering

Name : Tripti Maurya Date of Birth : 22/02/1992 Unique id : 1-4643545074 Education Qualifications : B.E. (Mining. Engg.) & M.Tech (by

Research) (Rock Excavation Technology and Management)

Work Experience Teaching : 4 years 7 months Research : NA Industry : NA Others : NA Area of Specialization : Rock Excavation Technology and Management Courses taught at : Under Graduate Graduate Level Research guidance No. of paperspublished : National - 0


Master : NA Ph.D. : NA Projects carriedout : NA Patents : NIL TechnologyTransfer : NIL Research Publications : 2 No. of Bookspublished : NIL

Name : HARDIKBHAI PARSHOTTAMBHAI KARKAR Date of Birth : 20/01/1992 Unique id : 1-3367124873 Education Qualifications : B.E. (Mining Engg.) & M. Tech. (Mine Planning) Work Experience Teaching : 4 Years and 6 Months Research : NA Industry : NA Others : NA Area of Specialization : Mining Engineering Courses taught at : Under Graduate Level Research guidance No. of papers published : National - 1

: International Journals - NIL : Conferences - 0

Master : NA Ph. D. : NA Projects carried out : NIL Patents : NIL Technology Transfer : NIL Research Publications : 1 No. of Books published : NIL

Name : J. A. Vaniya Date of Birth : 03/11/1987 Unique id : 1-3681085193 Education Qualifications : B.E. (Mining. Engg.) & M. Tech. (Mine Planning) Work Experience Teaching : 3.5 years Research : NA Industry : 01 year Others : NA Area of Specialization : Mine Planning Coursestaughtat : Under Graduate Research guidance No. of paperspublished : Nil Master : Nil Ph.D. : NA Projects carriedout : nil Patents : NIL TechnologyTransfer : NIL Research Publications : nil No. of Bookspublished : NIL

General Department Name : Dr. Jeegnesh. C. Bosamiya Date of Birth : 18/01/1980 Unique id : 1-2300279218

Education Qualifications : Ph. D(Mathematics) Work Experience Teaching : 12 years Research : 07 years Industry : NA Others : NA Area of Specialization : Mathematics Coursestaughtat :Under Graduate and Post Graduate Level Research guidance No. of paperspublished : National - 4

:International Journals - NIL : Conferences - 3

Master : Ph.D. : NA Projects carriedout : NA Patents : NIL TechnologyTransfer : NIL Research Publications : 4 No. of Bookspublished : 2

Name :Avani M. Buddhbhatti Date of Birth : 13/04/1983 Unique id : 1-766433148

Education Qualifications : M.Sc.(Mathematics) Work Experience Teaching : 12 years Research : 0 year Industry : 0 year Others : 0 year Area of Specialization : Applied Mathematics Coursestaughtat :Under Graduate Level Research guidance No. of paperspublished in National (0)/InternationalJournals (0) /International Conferences (1) Master : N.A. Ph.D. : N.A. Projects carriedout : NIL Patents : NIL TechnologyTransfer : NIL Research Publications : 0 No. of Bookspublished : 0

Name : Dr. Manisha K. Gosai Date of Birth : 10/11/1985 Unique id : 1-766679292

Education Qualifications : Ph.D.(English) : Work Experience Teaching : 10 years Research : 7 years Industry : 0 Others : NA Area of Specialization : English Literature Coursestaughtat : Under Graduate and Post Graduate Level Research guidance No. of paperspublished : National - 2

:International Journals- 0 : Conferences - 2

Master : 00 Ph.D. : NA Projectscarriedout : NIL Patents : NIL TechnologyTransfer : NIL Research Publications : 2 No. of Bookspublished : 02

Name : Dr. Maulik P.Vyas Date of Birth : 25/09/1981 Unique id : 1-2968569470

Education Qualifications : Ph.D. Work Experience Teaching : 10 year Industry : 0 Others : 0 Area of Specialization : English Literature Coursestaughtat : Under Graduate and Post Graduate Level Research guidance No. of paperspublished in National (4)/International Journals-(3)/Conferences (10) Master : NIL Ph.D. : NIL Projects carriedout : NIL Patents : NIL TechnologyTransfer : NIL Research Publications : (7) No. of Bookspublished : 1

Name : Kishor K.Pokar Date of Birth : 11/05/1981 Unique id : 1- Education Qualifications : M.Phil Work Experience Teaching : 10 year Industry : 0 Others : 0 Area of Specialization : Mathematics Coursestaughtat : Under Graduate Research guidance No. of papers published in National (0)/International Journals-(0)/Conferences (0) Master : NIL Ph.D. : NIL Projects carriedout : NIL Patents : NIL TechnologyTransfer : NIL Research Publications : (0) No. of Bookspublished : 0

Name : Dr. Sanjaykumar K. patel Date of Birth : 28/06/1975 Unique id : 1-3747530654

Education Qualifications : Ph.D. Work Experience Teaching : 21 year Industry : 0 Others : 0 Area of Specialization : Analysis, Graph Theory Coursestaughtat : Under Graduate and Post Graduate Level Research guidance No. of papers published in National (0)/International Journals-(16)/Conferences (0) Master : NIL Ph.D. : 2 (on going) Projects carriedout : NIL Patents : NIL TechnologyTransfer : NIL Research Publications : (16) No. of Bookspublished : 2

Name : Irfan I Sumara Date of Birth : 01/06/1985 Unique id : 1-766433144

Education Qualifications : M.Phil Work Experience Teaching : 10 year Industry : 0 Others : 0 Area of Specialization :Physics( Material Science) Coursestaughtat : Under Graduate Research guidance No. of paperspublished in National (0)/International Journals-(0)/Conferences (0) Master : NIL Ph.D. : NIL Projects carriedout : NIL Patents : NIL TechnologyTransfer : NIL Research Publications : (0) No. of Bookspublished : 0

Fee

Details of Fee, as approved by State Fee Committee, for the Institution

Time schedule for payment of Fee for the entire Programme

One Month time duration given to students for payment of fee after starting of odd

semester of the academic year.

No. of Fee waivers granted with amount and name of students

Total 107 students are granted for fee waivers and amount =107x1500=1,60,500 Rs.

List of students is as following:

Chemical - 1st year

1 201190125316 FUL RAJENDRASINH SHANKUBHA

2 201190108271 GAUSWAMI HITESHGIRI SHAILESHGIRI

3 201190113736 BELA YASH SAJAN

Chemical - 2nd year

4 190150105036 PARMAR RAHUL DHIRAJBHAI

5 190150105073 VASOYA RUTIK TULSIBHAI

Chemical - 3rd year

6 180150105005 BHANDERI BHAGIRATHBHAI RAVJIBHAI

Chemical - 4th year

7 170150105017 LAKHANI NIKHILKUMAR MUKESHBHAI

8 170150105021 MISTRI NILESH RAJESHKUMAR

9 180153105005 CHHUCHHIYA CHIRAG HEMANTBHAI

Civil - 1st year

10 201190123454 PINDORIYA MINESH ARJAN

11 201190117980 MANGE SHIVKUMAR NARENDRABHAI

12 201190119800 Nand Kesariya

13 201190131365 DANGAR JAYDEVBHAI SHAMBHUBHAI

Civil - 2nd year

14 190150106029 JADEJA VANRAJSINH JITUBHA

15 190150106033 KHATRI REHAN MUNIR

16 190150106038 PATEL MAYURBHAI RAJUBHAI

17 190150106043 RAJGOR DEEP PRATAPBHAI

18 190150106046 SARDHARA MAYURKUMAR BHARATBHAI

19 201190724567 Patariya mamta shivjibhai

Civil - 3rd year

20 180150106044 KALATHIYA NIRAVKUMAR POPATBHAI

21 180150106092 RANA RUTURAJSINH YOGRAJSINH

22 180150106100 SENGHANI HARSHIL JAGDISH

23 180150106107 SONEJI MOHAMMADZAID ABDULMAJID

24 190153106019 PATHAK VALLABHDAS VISHNUDAS

Civil - 4th year

25 170150106031 GOR HEMANGINI PRAKASHBHAI

26 160150106022 DABHI JAYESHKUMAR RAMJIBHAI

27 170150106092 RUDANI DARSHAN NATVARLAL

28 170150106111 VACHHANI NENSI RASIKLAL

29 170150106119 VASOYA JAYDIPKUMAR BHAGVANBHAI

30 180153106008 GORI JIGAR BHAILAL

Electrical - 1st year

31 201190112011 JADEJA HARDEEPSINH JUVANSINH

32 201190124711 Vyas Ayushi Dilipbhai

33 201190106954 Gondaliya Nayandas Bharatdas

Electrical - 2nd year

34 190150109002 ASODARIYA HARSHAD BIPINBHAI

35 190150109008 BHUDIYA KRUPALI NARANBHAI

36 190150109014 GAJJAR KRUPALI HARESHBHAI

37 190150109020 JADAV RAVIBHAI JERAMBHAI

38 190150109023 KACHHATIYA ARVINDBHAI LADHABHAI

39 190150109039 SAMA SUMBULA MAHAMADSALIM

40 190150109040 SHEKHVA MIHIR MOHANBHAI

41 201190725032 UDAVANI HARSH PRATAPBHAI

Electrical - 3rd year

42 180150109050 KADIYA MAHESH JAYASUKHBHAI

43 180150109057 KANZARIYA PARAS HARJIBHAI

44 180150109067 MAHESHWARI ROSHANIBEN NANJIBHAI

45 180150109107 SIDDHAPURA NIRAV TUSHARBHAI

46 190153109016 PRAJAPATI PARTHKUMAR DEVJIBHAI

Electrical - 4th year

47 170150109002 BADRESIYA CHINTANKUMAR DILIPBHAI

48 170150109045 JETHI MAYANK JAGDISHBHAI

49 170150109046 JETHI NEEL GHANSHYAMBHAI

50 170150109070 MEHTA SAGAR CHETANBHAI

51 170150109111 VALA HITESH FULCHANDBHAI

52 180153109024 PATADIYA DHANESH KALPESHBHAI

53 140150109060 NANDANIYA BHAVESH MAISHUR

E.C. - 2nd year

54 190150111004 GOSWAMI KIRAN MAHESH

55 190150111009 RIBADIYA NIRAVKUMAR SHAILESHBHAI

56 190150111010 VARSANI HARSH KISHOR

E.C. - 3rd year

57 170150111014 LIMBANI HARDIK CHHAGANLAL

58 180150111029 VAISHNAV SHIVAM MUKESHCHANDRA

59 190153111001 GAUTTAM AYUSHH CHANDRAKANT

E.C. - 4th year

60 170150111025 RAMDATI KEVALGIRI TANESHGIRI

61 170150111021 NANDASANA BANSEEBEN DAYALJEEBHAI

62 170150111036 ZALA KASHMIRABA SHAILENDRASINH

63 180153111002 RAJYAGURU MITESH MANHARLAL

Environmental - 2nd year

64 190150113002 BATTA GHANSHYAM HARIBHAI

65 190150113020 PANDYA ANURAG VIPULBHAI

Environmental - 3rd year

66 180150113011 DUDHAGARA KINAL TULSIBHAI

67 180150113036 RABADIYA NANDANI NITINBHAI

Environmental - 4th year

68 170150113018 KACHHADIYA AMITKUMAR NARSINHBHAI

Mechanical - 1st year

69 201190135698 PRAJAPATI BHAVESH DHARSHIBHAI

70 201190131109 NANGESH NARSI LAKHAMANBHAI

71 201190117551 DABHI KISHOR DEVRAMBHAI

72 201190125776 RACHHADIYA HARSHIT SATISHBHAI

Mechanical - 2nd year

73 190150119008 DHARAK YASH RAJESHBHAI

74 190150119010 GHOGHAREE NIKUNJ LALJEEBHAI

75 190150119037 PATEL SACHIN RAKESHBHAI

76 190150119039 PINDORIYA KISHAN RASHIKLAL

77 190150119041 RABADIYA HIREN VALJI

78 190150119049 SORATHIYA NILESH GOPALBHAI

Mechanical - 3rd year

79 180150119003 ATIT NIKHIL DILIPBHARATHI

80 180150119008 BHATT DHRUV SANJAYBHAI

81 180150119036 JETHI GAURAV TARUN

82 180150119053 MER VISHAL JIVRAJBHAI

83 180150119112 VAYEDA MEET CHANDRESH

84 180150119113 VORA VANSH VIRAL

85 190153119013 MARAND SAHIL PREMJI

Mechanical - 4th year

86 170150119006 BAKUTRA RAJESH GHELABHAI

87 170150119009 BAMANIYA MADHAVIK DHANJIBHAI

88 170150119019 BHOGAYATA KISHAN GIRISHBHAI

89 170150119056 MAGHUDIYA HIREN DILIPBHAI

90 180153119006 CHAVDA BHAVIN KIRANBHAI

Mining - 1st year

91 201190130723 RAFALIYA SAHIL PARESHBHAI

92 201190133836 GAMI HARDIKKUMAR BHANUBHAI

Mining - 2nd year

93 190150122003 CHANDERA NAYANKUMAR MULUBHAI

94 190150122004 GARAMBHA KIRTI HARIBHAI

95 190150122006 KANERIYA PRINCE MANISHBHAI

96 190150122010 PATEL NISHIT SAMIRBHAI

97 201190715347 CHAUHAN DARSHAN YOGESHBHAI

Mining - 3rd year

98 180150122001 BELIM UVESHKHAN HUSENKHAN

99 180150122004 BUTANI KRUSHNAL GHANSHYAMBHAI

100 180150122017 MADAM ARJUN NARAN

101 180150122019 MONPARA RAHIL MUKESHBHAI

Mining - 4th year

102 170150122007 CHHODVADIYA BHARGAV RAGHVBHAI

103 170150122018 LAGARIYA NILESHKUMAR BHIKHABHAI

104 170150122024

MOHAMMAD BILAL JAMALI MOHAMMAD FAHEEM

KHAN

105 170150122025 MORADIYA SHREY DINESHBHAI

106 170150122031 RAKHOLIYA JAGADISH PANKAJBHAI

107 180153122020 SALAKHANA SOHAM DINESHBHAI

Criteria for Fee waivers

The candidate who is willing to avail benefits of TFW scheme should have family

income of less than 8 Lakh. The candidate needs to upload the valid income certificate

issued by Government as mentioned in document uploading section.

Estimated cost of Boarding and Lodging in Hostels

Estimated cost of boarding is Rs. 3000/- per annum.

Admission

a. Number of seats sanctioned with the year of approval

Program Shift Level Course FT/PT+ Affiliating Body

(Univ/Body)

Intake

Approved for

2020-21

ENGINEERING

AND

TECHNOLOGY

1ST U.G. CHEMICAL

ENGINEERING

FT Gujarat Technological

University,

Ahmedabad

60

ENGINEERING

AND

TECHNOLOGY

1ST U.G. CIVIL

ENGINEERING


University,

Ahmedabad

60

ENGINEERING

AND

TECHNOLOGY

1ST U.G. ELECTRICAL

ENGINEERING


University,

Ahmedabad

60

ENGINEERING

AND

TECHNOLOGY

1ST U.G. ENVIRONMENTAL

ENGINEERING


University,

Ahmedabad

30

ENGINEERING

AND

TECHNOLOGY

1ST U.G. MECHANICAL

ENGINEERING


University,

Ahmedabad

60

ENGINEERING

AND

TECHNOLOGY

1ST U.G. MINING

ENGINEERING


University,

Ahmedabad

30

ENGINEERING

AND

TECHNOLOGY

1ST P.G. ELECTRICAL

ENGINEERING


University,

Ahmedabad

18

ENGINEERING

AND

TECHNOLOGY

1ST P.G. MECHANICAL (I.C

. ENGINE &

AUTOMOBILE

ENGINEERING)


University,

Ahmedabad

18

Number of Students admitted under various categories each year in the last three years

A.Y. Link

2019-20 https://drive.google.com/file/d/16oAm5c2uAYYTACKZ4B8DfsTrE_5EaAdj/

view?usp=sharing

2018-19 https://drive.google.com/file/d/1PNt_be0ReJqO3HjdCXjA0EONA6-C2em-

/view?usp=sharing

2017-18 https://drive.google.com/file/d/1vNN_l8z8zANGkM8m2Ige7PXY7toKSwX4/

view?usp=sharing

Admission Procedure

Mention the admission test being followed, name and address of the Test Agency and its

URL (website)

http://www.jacpcldce.ac.in

Number of seats allotted to different Test Qualified candidate separately (AIEEE/ CET (State

conducted test/ University tests/ CMAT/ GPAT)/ Association conducted test)

www.jacpcldce.ac.in

Criteria and Weightages for Admission

Describe each criterion with its respective weightages i.e. Admission Test, marks in

qualifying examination etc.

https://drive.google.com/file/d/1dkyVAa131u-epuDiu4pIx76A6wv7-la_/view

Mention the minimum Level of acceptance, if any


Mention the cut-off Levels of percentage and percentile score of the candidates in the admission

test.

For (Gujcet) Entrance test

http://www.jacpcldce.ac.in/Adm20/BE/Percentile_PCM_GujCET.pdf

For GSEB

http://www.jacpcldce.ac.in/Adm20/BE/Percentile_PCM_GB.pdf

For CBSE

http://www.jacpcldce.ac.in/Adm20/BE/Percentile_PCM_CB.pdf

For ICSE

http://www.jacpcldce.ac.in/Adm20/BE/Percentile_PCM_ISCE.pdf

http://www.jacpcldce.ac.in/

http://www.jacpcldce.ac.in/



http://www.jacpcldce.ac.in/Adm20/BE/Percentile_PCM_GujCET.pdf

http://www.jacpcldce.ac.in/Adm20/BE/Percentile_PCM_GB.pdf

http://www.jacpcldce.ac.in/Adm20/BE/Percentile_PCM_CB.pdf

http://www.jacpcldce.ac.in/Adm20/BE/Percentile_PCM_ISCE.pdf

INSTRUCTIONAL AREA

Sr. No.

Programme ENGINEERING AND TECHNOLOGY

Level Under Graduate

1 Room Type Classroom Room ID/ Name 101Area of Room in Sqm 63.94 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting

Ready Readiness of Electrification and Lighting

Ready

Readiness of furniture/fixtures

Ready

Air Conditioning Not Available

Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



5 Room Type Laboratory Room ID/ Name 104CArea of Room in Sqm 185.7 Building Name LAB ENVIRONMENTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



6 Room Type Laboratory Room ID/ Name 115Area of Room in Sqm 167.9 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



7 Room Type Laboratory Room ID/ Name 115-1Area of Room in Sqm 167.8 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



11 Room Type Tutorial Room Room ID/ Name 120Area of Room in Sqm 66 Building Name MAIN BUILDING

Building Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



12 Room Type Seminar Hall Room ID/ Name 129Area of Room in Sqm 218.15 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



13 Room Type Seminar Hall Room ID/ Name 130Area of Room in Sqm 218.15 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.


Level Post Graduate



Ready


Ready


Sr. No.



18 Room Type Workshop Room ID/ Name 133Area of Room in Sqm 513.55 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



23 Room Type Computer Laboratory Room ID/ Name 205-AArea of Room in Sqm 70 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.


Level Post Graduate

28 Room Type Classroom Room ID/ Name 212-3Area of Room in Sqm 120.54 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.


Level Post Graduate



Ready


Ready


Sr. No.



30 Room Type Laboratory Room ID/ Name 213Area of Room in Sqm 181.25 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Ready Readiness of Ready

Painting Electrification and Lighting


Ready


Sr. No.





Ready


Ready


Sr. No.


Level Post Graduate

32 Room Type Tutorial Room Room ID/ Name 216Area of Room in Sqm 34.68 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.


Level Post Graduate

36 Room Type Classroom Room ID/ Name 225-3Area of Room in Sqm 91 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



37 Room Type Additional Workshop Room ID/ Name 226Area of Room in Sqm 378.84 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.


Level Post Graduate



Ready


Ready


Sr. No.



39 Room Type Computer Laboratory Room ID/ Name 236Area of Room in Sqm 407.187 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



43 Room Type Classroom Room ID/ Name 304Area of Room in Sqm 63.94 Building Name MAIN BUILDING



Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



45 Room Type Laboratory Room ID/ Name 306-1Area of Room in Sqm 151 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



49 Room Type Laboratory Room ID/ Name 319Area of Room in Sqm 151 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



54 Room Type Drawing Hall Room ID/ Name 319-5Area of Room in Sqm 151.3 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



55 Room Type Drawing Hall Room ID/ Name 319-6Area of Room in Sqm 183.27 Building Name MAIN BUILDINGBuilding Number 1 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



57 Room Type Tutorial Room Room ID/ Name A101Area of Room in Sqm 84.99 Building Name CLASSROOM ANNEXY

BUILDINGBuilding Number 2 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



58 Room Type Classroom Room ID/ Name A102Area of Room in Sqm 84.99 Building Name CLASSROOM ANNEXY



Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. Programme ENGINEERING AND Level Under Graduate

No. TECHNOLOGY




Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready


Ready


Sr. No.






Ready

Readiness of Ready Air Conditioning Not Available

furniture/fixtures

Sr. No.






Ready


Ready


Sr. No.



81 Room Type Classroom Room ID/ Name AM 101Area of Room in Sqm 95.3 Building Name CIVIL-APPLIED BUILDINGBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



82 Room Type Classroom Room ID/ Name AM 102Area of Room in Sqm 95.3 Building Name CLASSROOM CIVIL-APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



83 Room Type Seminar Hall Room ID/ Name AM 115Area of Room in Sqm 412.02 Building Name SEMINAR ROOM-APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready

Air Conditioning Available

Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



88 Room Type Tutorial Room Room ID/ Name AM 310Area of Room in Sqm 34.86 Building Name TUTORIAL ROOM-APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



89 Room Type Laboratory Room ID/ Name AM103Area of Room in Sqm 261.02 Building Name LAB CIVIL-APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



90 Room Type Laboratory Room ID/ Name AM104AArea of Room in Sqm 256.15 Building Name LAB CIVIL-APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



91 Room Type Laboratory Room ID/ Name AM104BArea of Room in Sqm 255.91 Building Name LAB CIVIL-APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



92 Room Type Laboratory Room ID/ Name AM105Area of Room in Sqm 369.17 Building Name LAB CIVIL-APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Ready Readiness of Ready

Painting Electrification and Lighting


Ready


Sr. No.





Ready


Ready


Sr. No.



94 Room Type Other Room ID/ Name AM109Area of Room in Sqm 22.37 Building Name STAFFR CIVIL APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



95 Room Type Other Room ID/ Name AM110Area of Room in Sqm 51.42 Building Name HOD CIVIL APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



96 Room Type Other Room ID/ Name AM111Area of Room in Sqm 34.86 Building Name STAFF CIVIL APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



98 Room Type Research Laboratory Room ID/ Name AM203BArea of Room in Sqm 225.88 Building Name CONFERANCE CIVIL-

APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready

Readiness of Ready Air Conditioning Not Available

furniture/fixtures

Sr. No.





Ready


Ready


Sr. No.



100 Room Type Classroom Room ID/ Name AM204BArea of Room in Sqm 255.91 Building Name LAB CIVIL-APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



101 Room Type Computer Laboratory Room ID/ Name AM205-AArea of Room in Sqm 190.1 Building Name LAB CIVIL-APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



102 Room Type Other Room ID/ Name AM209Area of Room in Sqm 36.47 Building Name LAB CIVIL-APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



105 Room Type Laboratory Room ID/ Name AM303A

Area of Room in Sqm 413.38 Building Name LAB CIVIL-APPLIEDBuilding Number 6 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



110 Room Type Classroom Room ID/ Name CH 001Area of Room in Sqm 94.12 Building Name CHEMICAL CLASSROOMBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



111 Room Type Classroom Room ID/ Name CH 002Area of Room in Sqm 94.12 Building Name CHEMICAL CLASS ROOMBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting

Ready Readiness of Electrification and

Ready

LightingReadiness of furniture/fixtures

Ready


Sr. No.



112 Room Type Seminar Hall Room ID/ Name CH 005Area of Room in Sqm 406.41 Building Name CHEMICAL SEMINAR HALLBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



113 Room Type Other Room ID/ Name CH 006Area of Room in Sqm 23.83 Building Name CHEMICAL BOYS TOILETBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



114 Room Type Other Room ID/ Name CH 007Area of Room in Sqm 23.83 Building Name CHEMICAL GIRLS TOILETBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



115 Room Type Other Room ID/ Name CH 008Area of Room in Sqm 34.65 Building Name CHEMICAL FACULTY ROOMBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



116 Room Type Other Room ID/ Name CH 009Area of Room in Sqm 23.83 Building Name CHEMICAL HOD OFFICEBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



117 Room Type Other Room ID/ Name CH 010Area of Room in Sqm 22.84 Building Name CHEMICAL DEPARTMENT

LIBRARYBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



118 Room Type Other Room ID/ Name CH 011Area of Room in Sqm 23.83 Building Name CHEMICAL GENTS STAFF

TOILETBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



119 Room Type Other Room ID/ Name CH 012Area of Room in Sqm 23.83 Building Name CHEMICAL LADIES STAFF



Ready


Ready


Sr. No.



120 Room Type Other Room ID/ Name CH 013Area of Room in Sqm 18.2 Building Name CHEMICAL PH TOILETBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



123 Room Type Other Room ID/ Name CH 204Area of Room in Sqm 23.83 Building Name CHEMICAL BOYS TOILETBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



124 Room Type Other Room ID/ Name CH 205Area of Room in Sqm 23.83 Building Name CHEMICAL GIRLS TOILETBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



125 Room Type Other Room ID/ Name CH 206Area of Room in Sqm 34.65 Building Name CHEMICAL FECULTY ROOMBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



126 Room Type Other Room ID/ Name CH 207Area of Room in Sqm 23.83 Building Name CHEMICAL HOD OFFICEBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



127 Room Type Other Room ID/ Name CH 208Area of Room in Sqm 34.65 Building Name CHEMICAL LADIES ROOMBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



128 Room Type Other Room ID/ Name CH 209Area of Room in Sqm 23.83 Building Name CHEMICAL GENTS STAFF



Ready


Ready


Sr. No.



129 Room Type Other Room ID/ Name CH 210Area of Room in Sqm 23.83 Building Name CHEMICAL LADIES STAFF



Ready


Ready


Sr. No.



130 Room Type Other Room ID/ Name CH 211Area of Room in Sqm 18.2 Building Name CHEMICAL PH TOILET



Ready


Ready


Sr. No.



131 Room Type Other Room ID/ Name CH 212Area of Room in Sqm 183.28 Building Name CHEMICAL COMPUTER LABBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



132 Room Type Laboratory Room ID/ Name CH003AArea of Room in Sqm 99.3 Building Name CHEMICAL LABORATORY

OCUP/P&ICBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



133 Room Type Laboratory Room ID/ Name CH003BArea of Room in Sqm 99.3 Building Name CHEMICAL LABORATORY

CPIBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



134 Room Type Laboratory Room ID/ Name CH003CArea of Room in Sqm 74.07 Building Name CHEMICAL LABORATORY

PRPCBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



135 Room Type Laboratory Room ID/ Name CH003DArea of Room in Sqm 74.07 Building Name CHEMICAL LABORATORY

CRE I & CRE IIBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.




FFO



Ready


Ready


Sr. No.




IPC / HTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



138 Room Type Laboratory Room ID/ Name CH004CArea of Room in Sqm 182.52 Building Name CHEMICAL LABORATORY

MOBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.




MTOBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.




PSO / CSMBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.




PEDBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



142 Room Type Tutorial Room Room ID/ Name CH203BArea of Room in Sqm 148.94 Building Name CHEMICAL TUTORIAL

ROOMBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



143 Room Type Tutorial Room Room ID/ Name CH203CArea of Room in Sqm 148.94 Building Name CHEMICAL TUTORIAL ROOMBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



144 Room Type Classroom Room ID/ Name EC-101Area of Room in Sqm 92.83 Building Name EC BUILDINGBuilding Number 7 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



146 Room Type Laboratory Room ID/ Name EC-104-AArea of Room in Sqm 616.25 Building Name EC BUILDINGBuilding Number 7 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



147 Room Type Multi-Purpose Hall Room ID/ Name EC-115Area of Room in Sqm 218.15 Building Name EC BUILDINGBuilding Number 7 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



150 Room Type Laboratory Room ID/ Name EC-203Area of Room in Sqm 616.25 Building Name EC BUILDINGBuilding Number 7 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



151 Room Type Laboratory Room ID/ Name EC-203AArea of Room in Sqm 616.25 Building Name EC BUILDINGBuilding Number 7 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



152 Room Type Laboratory Room ID/ Name EC-203BArea of Room in Sqm 181.29 Building Name EC BUILDINGBuilding Number 7 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.





Ready


Ready


Sr. Programme ENGINEERING AND Level Under Graduate

No. TECHNOLOGY



Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



157 Room Type Laboratory Room ID/ Name EC-303AArea of Room in Sqm 616.25 Building Name EC BUILDINGBuilding Number 7 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



158 Room Type Laboratory Room ID/ Name EC-303BArea of Room in Sqm 181.29 Building Name EC BUILDINGBuilding Number 7 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.





Ready


Ready


Sr. No.



160 Room Type Classroom Room ID/ Name EN101Area of Room in Sqm 94.12 Building Name CLASSROOM

ENVIRONMENTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



161 Room Type Classroom Room ID/ Name EN102Area of Room in Sqm 94.12 Building Name CLASSROOM

ENVIRONMENTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



162 Room Type Laboratory Room ID/ Name EN103AArea of Room in Sqm 110.11 Building Name LAB ENVIRONMENTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



163 Room Type Laboratory Room ID/ Name EN103BArea of Room in Sqm 110.11 Building Name LAN ENVIRONMENTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



164 Room Type Laboratory Room ID/ Name EN103CArea of Room in Sqm 185.7 Building Name LAB ENVIRONMENTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



165 Room Type Laboratory Room ID/ Name EN104AArea of Room in Sqm 183.76 Building Name LAB ENVIRONMENTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



166 Room Type Laboratory Room ID/ Name EN104BArea of Room in Sqm 148.8 Building Name LAB ENVIRONMENTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



167 Room Type Laboratory Room ID/ Name EN104CArea of Room in Sqm 185.7 Building Name LAB ENVIRONMENTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



168 Room Type Other Room ID/ Name EN107Area of Room in Sqm 34.65 Building Name STAFF ENVIRONMENTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



169 Room Type Other Room ID/ Name EN108Area of Room in Sqm 23.83 Building Name HOD ENVIRONMENTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


Sr. No.



170 Room Type Other Room ID/ Name EN109Area of Room in Sqm 23.83 Building Name SATFF ENVIRONMENTBuilding Number 5 Readiness of Flooring ReadyReadiness of Wall and Painting


Ready


Ready


This is to certift that Government Engineering college, Bhuj is governrnerit institutionset up on the land owned by government. college buildings are owned by the government ofGujarat and the ta<es of buildings are regularly paid to Nagarparika Bhuj.

All the buildings are suitable for occupancy.

This certificate is issued for the purpose of submitting to AICTE,application of extension of approval.

W

along with the

Head,Civil Engineering Departmen!

GoW. Engg. College, Bhuj

eputy Executive EnrStateR&BSubDivisi

Bhuj - Kachchh

@Priflcipal

Govt. Engg.College,Bhuj - 370001

PRITif,IPAL

Govern ment Englneerhg 0ollegeBHUJ-370 001

CRO1-7011876748 17.1 004001

CERTIFICATE

Date: L4/O2/2OL8

This is to certiff that Government Engineering College, Bhuj, at New Ravalwadi Re-LocationSite, B/FI. Sahyog Nagar, Bhuj - Kachchh Pin:- 370 001, This college is Government Institution set upon the land owned Government. College buildings are owned by the government of Gujarat. The mainbuilding, Anexy, chemical, civil, Ec buildings of the college are constructed and maintained by Roadand Building Department, Government of Gujarat.

All above mentioned buildings are planned and designed according to fire safety standards and areequipped with necessary fire safety requirements.

StateR&B SubDivision

Bhuj-Kuchchha

l\a,w.

2zl?

g

CRO1-7011876748 17.1 005001

Library

TOTAL BOOKS: 8549

DEPARTMENT WISE BREAK-UP

DEPARTMENT TITLES VOLUMES TITLES

(RUSA)

VOLUMES

(RUSA)

TOTAL

TITLES

TOTAL

VOLUMES

CIVIL 137 928 12 50 149 978

CHEMICAL 40 240 07 25 47 265

ELECTRICAL 216 2629 17 50 233 2679

E.C. 195 663 24 92 219 755

ENVIRONMENT 73 239 05 12 78 251

MECHANICAL 294 2609 14 56 308 2665

MINING 65 232 00 00 65 232

GENERAL 124 1008 09 28 133 1036

TOTAL 1144 8548 88 313 1232 8861

SUBSCRIBED JOURNALS

Institute is subscribed to 07 Journals (05 Mechanical, 02 Electrical) & 16 Magazines.

E-JOURNALS

Institute is subscribed to ASME E-JOURNAL under ESS program

Computing Facilities

Internet Bandwidth: 100 MBPS

Number and configuration of System: 340, i3 -4GB RAM, HDD-512 GB(Mostly)

Total number of system connected by LAN: 340

Total number of system connected by WAN: 2

Major software packages available: 3

Special purpose facilities available: 44 printers, Wi-Fi & CCTV, DTH receiver, Video

Conference System.

Laboratory and Workshop

Electrical Engineering Department

List of Major Equipment/Facilities in each Laboratory/ Workshop

Room No.

Lab Name Name of Equipment Quantity

212-A

CIRCUIT AND NETWORK

THEVENIN THEOREM 2

NORTONS THEOREM 2

SUPERPOSITION THEOREM 2

RESIPROCITY THEOREM 2

ADIRON MAKE EDUCATION TRAINING BOARD MAXIMUM POWER TRANSFER THEOREM

2

ADIRON MAKE EDUCATION TRAINING BOARD KIRCHHOF'S LAW

2

TWO PORT NETWORK KIT MAKE ED KIT 2

R-L-C RASONANT KIT OMEGA TYPE ES 215 2

NETWORK THEOREM TRAINING KIT 64 ETB OMEGA

1

THEVENIN'S THEORM MODEL-ETB201 1

NORTON'S THEOREM MAKE ED KIT 1

RECIPROCITY THEOREM OMEGA MAKE ETB-201

1

SUPERPOSITION THEOREM ETB-201 1

MAXIMUM POWER TRANSFER THEOREM ETB-183 OMEGA

1

PERFORMANCE OF PARAMETER LIKE ABCD, Z, Y, H EDKIT

1

212-B

MICROPROCESSOR AND MICROCONTROLLER

DMS 8085 MICROPROCESSOR TRAINING KIT 3

SMPS POWER SUPPLY (1 A) 3

8086 MICROPROCESSOR TRAINING KIT 2

SMPS POWER SUPPLY (3 A) 2

8155 STUDY CARD 1

8212 STUDY CARD 1

8255 STUDY CARD 1

8253 STUDY CARD 1

8251 STUDY CARD 1

LATCH, BUFFER, DECODER, RAM STUDY CARD 1

8259 STUDY CARD 1

8279 STUDY CARD 1

DMA 8257 CONTROLLER STUDY CARD 1

DC MOTOR CONTROLLER CARD & MOTOR 1

THUMB WHEEL INTERFACE CARD 1

TRAFFIC LIGHTS CONTROLLER CARD 1

STEPPER MOTOR CONTROLLER CARD 1

ELEVATOR SIMMULATOR CARD 1

D TO A CONVERTER CARD 1

A TO D CONVERTER CARD 1

LOGIC INTERFACE CARD 1

SERIAL DISPLAY CARD 1

KEYBOARD SIMMULATOR CARD 1

MICROPROCESSER 8085 TUTOR SOFT-WARE WITH HARDWARE LOCK

5

8085 MICROPROCESSOR TRAINER MODEL (VMC-8502)

5

8086 MICROPROCESSOR TRAINER WITH PRINTER (VMC-8603)

8

DSP 30F 4011 BASED CONTROLLER CARD (MICRO4011)

1

MCS FAMILY MICROCONTROLLER TRAINER (MICRO 51EB LED)

10

UNIVERSAL 8/16 BIT MICROPROCESSOR TRAINER (MICROPOWER 1 LED)

10

2 CHANNEL DAC INTERFACE BOARD (VBMB 002)

2

8 CHANNEL ADC INTERDACE BOARD (VBMB 003)

2

8251 & 8253 INTERFACE BOARD (VBMB 04) 2

ADC AND DAC MEASUREMENT AND CONTROL MODULE ( VBMB030)

2

TMS 320 LF 240 TA BASED DSP TRAINER KIT (MICRO 2407A)

1

TMS 320 C 6713 BASED DSP TRAINER KIT (VSK 6713)

1

PROGRAMMABLE LOGIC CONTROLLER (VPLCT 04)

1

PROGRAMMABLE LOGIC CONTROLLER TRAINER (VPLCT 038)

1

212-C1

INSTRUMENTATION STRIP CHART RECORDER 2

"ADTRON", MEASUREMENT OF TEMPERATURE USING RTD PROBE

4

"ADTRON", MEASUREMENT OF TEMPERATURE USING THERMOCOUPLE

4

"ADTRON", MEASUREMENT OF TEMPERATURE USING THERMISTOR

4

TORQUE MEASURMENT TRAINER MODEL (UTTM 06) SL NO :3220

1

DISPLACEMENT MEASUREMENT USING LVDT-ITB-012CE

1

LIQUID LEVEL MEASUREMENT AND CONTROLLER KIT (VLMT-3)

1

LEVEL MEASUREMENT TRAINER USING ULTRASONIC (VLMT04)

1

TEMPERATURE INDICATOR 3

LOAD CELL TRAINER MODULE (ITB 004 CE) 3

STRAIN MEASUREMENT TRAINER(ITB 017 CE) 1

TEMPERATURE CONTROLLER(VTC-01) 1

PRESSURE MEASUREMENT TRAINER KIT (ITB-16B)

1

SYNCHRO TRANSMITTER AND RECEIVER TRAINER (PEC-03)

1

TEMPERATURE CONTROL SYSTEM (VTCS 02) 1

DIGITAL MEASUREMENT OF ANGULAR VELOCITY (ITB PEC 00AN)

1

STRIP CHART RECORDER, MAKE TOSHNIWAL, MODEL NO. RM1002C0000

1

212-C2

MEASUREMENT MAXWELL L/C BRIDGE (MEASUREMENT OF INDUCTANCE) (OMEGA TYPE ETB-135)

1

INSULATION TESTER MODEL 55 A 2

PORTABLE WHEATSTONE BRIDGE PL 32-03 1

KELVIN BRIDGE MODEL PL 39 1

LIGHT SPOT GALVANOMETER PL 61-04 1

AC/DC AMMETER HOUSED IN CASE WITH SCALE 0.5/10 A DYNAMOMETER TYPE

2

DE SAUTY'S BRIDGE 1

DIAL CONDENSOR BOX PACIFIC 4

RESISTANCE BOX PACIFIC AER-35 4

INDUCTION BOX PACIFIC 4

PORTABLE AC/DC ELECTRO DYNAMOMETER TYPE AMMETER 0-1 A

2

KELVIN BRIDGE DC POWER SUPPLY 1

KELVIN BRIDGE 2

WHEATSTONE BRIDGE 2

D- SAUTY'S BRIDGE 2

MEASUREMENT OF DISPLACEMENT USING LVDT

1

MEASUREMENT OF PRESSURE USING PRESSURE TRANSDUCER

1

MEASUREMENT OF DISTANCE USING ULTRASONIC TRANSDUCER

1

MEASUREMENT OF LOAD USING LOAD CELL 1

MEASUREMENT OF FORCE USING TRANSDUCER 1

ELECTRONIC LEVEL CONTROLLER WITH PUMP 1

OPTO TRANSMITTER AND RECIEVER DEMONSTRATOR

1

MEASUREMENT OF STRAIN USING STRAIN GAUGE

1

DC POSITION SERVO SYSTEM DEMONSTRATION 1

OPTICAL TRANSDUCER TRAINER MODEL (ST-2301)

1

STROBOSCOPE DIG. 2

WHEATSTONE BRIDGE 2

3 PHASE ELECTRONICS ENERGY METER 2

MEGGER 3

INSULATION TESTER 2

DIGITAL MEASUREMENT OF PHASE DIFFERENCE TRAINER

1

KELVIN DOUBLE BRIDGE TOSHNIWAL PL-39 CONDUCTOR CLAMP AND PS

1

SCHERING BRIDGE ETB-229 OMEGA 1

MAXWELL'S BRIDGE ETB-135 OMEGA 1

ANDERSON BRIDGE ETB-31 OMEGA 1

212-D1

Analog Electronics

DIGITAL LCR METER 925 TYPE WITH INSTRUCTION MANUAL & OTHER ACCESSORIES

1

DIGITA IC TESTER 910 TYPE 1

LINEAR IC TRAINER LTB 85 1

211303 SINGLE PULSE GENERATOR (10 MHZ) WITH INSTRUCTIONAL MANUAL

1

"SEINTECH" 20MHZ DUAL TRACE OSSILLOSCOPE WITH ALTERNAL TRIGGER,

3

COMPONENTS TESTER, CONTINUITY TESTER MODEL 201

FUNCTION GENERATOR (CADD0-4062) 16

SINGLE POWER SUPPLY (ST-4073) 10

DUAL POWER SUPPLY (ST-4075) 10

DUAL TRACKING REGULATED POWER SUPPLY (ST-4076)

5

DC REGULATOR POWER SUPPLY (0-30 V, 2 AMP)

3

LABORATORY TYPE MILI AMMETER (0-1/3/10/30 mA)

3

LABORATORY TYPE MILI AMMETER (0-10/30/100/300 mA)

3

AF OUTPUT METER/POWER METER (10 W) 1

M.C. TYPE (0-1 AMP) METER 4

DC REGULATED DUAL POWER SUPPLY (0-30 V, 2 AMP)

2

M.C. TYPE (0-5/10 AMP) METER 4

M.I. TYPE (20 AMP/50 AMP) METER 4

AC/DC PORTABLE METER, M.I. TYPE (0-5/10 AMP)

2

AC/DC PORTABLE METER, M.I. TYPE (0-30 V) METER

5

AC/DC PORTABLE METER, M.I. TYPE (0-150/300/600 V) METER

10

AC/DC PORTABLE METER, M.I. TYPE (0-1 AMP) METER

4

AMPLIFIER - 741 (SL NO - 325,326,328,329) 4

FUNCTION GENERATOR WITH FREQUENCY COUNTER MODEL FC-200

5

DUAL TRACE OSCILLOSCOPE (MODEL 05 320) 10

CONVERT GALVANOMETER 1

DIGITAL AMPLITUDE MODULATION 1

FREQUENCY MODULATION 1

ACTIVE FILTERS (S.S) 2

TWO STAGE RC COUPLED TRANSISTOR 2

PUSH PULL AMPLIFIER WITH POWER SUPPLY 1

PHASE SHIFT AUDIO OSCILLATOR WITH POWER SUPPLY

2

LINEAR IC TRAINER TYPE ETB-85 1

DIGITAL MULTIMETER MECO 85 1



"AE" MAKE PORTABLE AC VOLTMETER (O-15/30 VOLT)

3


6


3

"TECLOCK" MAKE ANALOG TECHNOMETER 2

555 TIMER CIRCUIT AND APPLICATION TIMER DELAY

1

AUTO DIGITAL IC TRAINER 1

1 PHASE ELECTRONICS ENERGY METER 2

MOVING COIL VOLTMETER 15

DYNEMOMETER TYPE WATTMETER 45

DIGITAL MULTIMETER 3

LOW POWER FACTOR WATT METER 45

MOVING IRON VOLTMETER (0-15V, 0-30V, 0-150V, 0-300V×2, 0-600V×2)

15

MOVING IRON AMMETER (01A, 0-3A, 0-5A×2, 0-10A×2, 0-20A)

15

LINEAR IC TESTER TRAINER MAKE OMEGA ETB 85

2

OP-AMP AS INTEGRATOR AND DIFFERENTIATOR TRAINER ETB 216

3

BREADBOARD IC OMEGA BBS101 10

RC COUPLED TRANSISTOR AMPLIFIER KIT ETB-45

1

OP-AMP PARAMETER MEASUREMENT KIT ETB 92

2

OP-AMP APPLICATION KIT OMEGA TYPE 152 2

OP-AMP TRAINER KIT WITH NECESSARY INPUT SIGNALS OAD 14

2

MULTIVIBRATOR KIT USING 555 TIMER ETB-141

2

PLL KIT USING 565 IC OMEGA TPYE - ETB 90 1

DIGITAL FREQUENCY METER OMEGA TYPE DFC018

1

DIGITAL STOP WATCH, MAKE - OMEGA DSC-602 3

212-D2

Basic Electronics

REGULATED POWER SUPPLY (S.S) 3

HARTLY OSCILLATOR 3

COLPITTS OSCILLATOR 3

PHASE SHIFT OSCILLATOR 3

SINGLE STAGE TRANSISTOR AMPLIFIER 4

TRANSISTOR DOUBLE STAGE RC COUPLED COM FEEDBACK AMPLIFIER

4

PUSH PULL AMPLIFIER 4

DIFFERENTIAL AMPLIFIER 4

TRANSISTOR BISING METHOD 5

HYBRID PARAMETER METHOD 4

NEGATIVE FEEDBACK AMPLIFIER MODEL 4

CLIPPING AND CLAMPING CIRCUIT 4

PN JUNCTION DIODE CHARACTERISTIC KIT WITH DIGITAL PANEL METER OF RANGE ETB-81

3

TRANSISTOR CHARACTERISTIC AND BIASING METHOD KIT WITH DIGITAL PANEL METER ETB-52

3

FET CHARACTERISTIC KIT WITH DIGITAL PANEL METER ETB-53

3

MOSFET CHARACTERISTIC KIT WITH DIGITAL PANEL METER ETB-78

3

ASTABLE MULTIVIBRATOR KIT USING TRANSISTOR ETB-26

1

BISTABLE MULTIVIBRATOR KIT USING TRANSISTOR ETB-27

1

MONOSTABLE MULTIVIBRATOR KIT USING TRANSISTOR ETB-28

1

ZENER DIODE CHARACTERISTIC KIT WITH DIGITAL METER ETB-51

3

SCHMITT TRIGGER KIT MAKE- OMEGA TYPE - ETB 42

1

PHOTO DIODE CHARACTERISTICS WITH PANEL METER TYPE - ETB 117

1

PV CELL CHARACTERISTICS KIT WITH PANEL METER (BPSX50W SOLARKT TYPE - ETB 117

1

78XX SERIES AND 79XX SERIES VOLTAGE REGULATOR KIT ETB 108

2

SPECIAL DIODE LIKE VARACTOR DIODE AND LED KIT TYPE - ETB154

2

STUDY OF BEHAVIOUR OF LIGHT EMMITING DIODE WITH POWER SUPPLY OSC (CR)

2

212-D1

DIGITAL ELECTRONICS

LOGIC TRAINER BOARD 2

OR/NOR/AND/NAND/BUFFER/OMEGA/LTB-804 BOOLEAN ALGEBRA 3

ADDER AND SUBTRACTOR 3

HALF AND FULL ADDER 3

VERIFICATION OF DEMORGEN'S THEOREM 3

BINARY COUNTER 3

BCD TO SEVEN SEGMENT 3

DIGITAL/LOGIC IC TRAINER (DILT) 6

DIGITAL ICs 10

DIGITAL IC TRAINER (TDIT 002) 4

DIGITAL TO ANALOG CONVERTER TRAINER (TDAT 20)

2

ANALOG TO DIGITAL CONVERTER (TADT 38) 2

MULTIPLEXER AND DEMULTIPLEXER (TMDT 42)

2

RS 232 C CABLE 2

DIGITAL IC TRAINER KIT TO PERFORM VARIOUS LOGIC GATE TYPE - LTB 817

2

A TO D CONVERTER USING OP-AMP TYPE - LTB 812

1

A TO D CONVERTER USING ICS TYPE - LTB 833 1

D TO A CONVERTER USING OP-AMP TYPE - LTB 813

1

D TO A CONVERTER USING ICS TYPE - LTB 834 1

DECODER SCANNER MATROLOGIC-MS5145 SR NO. 5207481007

1

212-E

COMPUTER LAB

A GAUTAM IBM COMPATIBLE PENTIUM COMPUTER

12

14" SVGA COLOUR MONITER 12

ANTI VIRUS SOFTWARE 12

1 KVA SERVO VOLTAGE STABILIZER 12

COMPUTER PENTIUM - III 21

SR Nos. (IR04997, IR05028, IR05021, IR05008, IR05027, IR05024, IR04999, IR05002, IR04991, IR05044, IR05039, IR05013, IR04995, IR05012, IR05000, IR05033, IR05029, IR05046, IR05048, IR05032, IR0502) =CPU: INTEL PENTIUM III 866 MHZ INTEL CHIPSET 815E MOTHER BOARD WITH 133 MHZ BUS SPEED =CACHE: 256 KB

=RAM: 128 MB 133 MHZ SDRAM UPGRADABLE TO 512 MB =HARD DISK: 20 GB HARD DISK INE DRIVE

=MONITER: 15" SVGA COLOR NON INTERFACED 2MB (MAX, 4MB) VRAM SHARED WITH MAIN MEMORY =DRIVES: 1.44 MB FLOPPY DRIVE

=52×CD ROM DRIVE

=I/O PORTS: 2 SERIAL, 1 PARELLEL 2 USB

=KEYBOARD: WINDOWS 98, 104 KEYS

#NAME?

#NAME?

COMPUTER SYSTEM WITH MULTIMEDIA KIT 4

Sr. Nos. (IR02000, IR02001, IR02002, IR02003)

=CPU: INTEL PENTIUM III 850 MHZ INTEL CHIPSET 815E MOTHER BOARD WITH 133 MHZ BUS SPEED =CACHE: 256 KB

=RAM: 128 MB 133 MHZ SDRAM UPGRADABLE TO 512 MB =HARD DISK: 20 GB HARD DISK IDE DRIVE

=MONITER: 15" SVGA COLOR NON INTERFACED 2MB (MAX, 4MB) VRAM SHARED WITH MAIN MEMORY =DRIVES: 1.44 MB FLOPPY DRIVE

=MULTIMEDIA KIT: 52×CD ROM DRIVE WITH REMOTE CONTROL, 180 W SPEAKERS, SOUND BLASTER AND MICROPHONE =NETWORK INTERFACE: PCI-32 BIT 10/100 MBPS ETHERNET CARD WITH UTP PORT

=I/O PORTS: 2 SERIAL, 1 PARELLEL 2 USB

=KEYBOARD: WINDOWS 98, 104 KEYS MULTIMEDIA KEYBOARD WITH INTERNET FUNCTIONS & PROGRAMMABLE KEYS #NAME?

#NAME?

POWER ONE MAKE ONLINE UPS (5KVA ONLINE UPS SYSTEM OF 1 PHASE INPUT, 1 PHASE OUTPUT WITH 9 NUMBER OF BATTERIES STAND)

6

GAUTAM COMUTER SYSTEM (P-4, 1.5 GHZ, 128 MB PDRAM, 40 GB HDD, 15" COLOUR MONITOR WITH

15

32 MB 4*AGP CARD, 1.44 MB FDD, 52*CD ROM DRIVE, SPEAKERS, SOUND BLASTARAND

MICROPHONE, 32 BIT 10/100 MBPS ETHERNET CARD WITH UTP, 2 SERIES, 1 PARALLEL, 2 USB PORTS, PS/2 MULTIMEDIA & INTERNET READY KEYBOARD, PS/2 TWO BUTTON LOGITECH SCROLL MOUSE WITH PED) GAUTAM COMPUTER SYSTEM CELINT(NODES) P-4, 1.4 GHZ WITH MS WINDOW 2000 PROFISSIONAL OEM AND ANTI VIREUS SOFTWARE

20

GAUTAM COMPUTER SYSTEM COMPUTER SERVER P3 1GHZ WITH MS WINDOW 2000 SERVER

2

AUTOMATIC SERVO STABILISERS 1 KVA 3

115-A

POWER ELECTRONICS

"HAMES" OSCILLOSCOPE (Z13216, Z12895) DIGITAL/A+B18NALOG STORAGE OSSILOSCOPE, 150MHZ WITH INSTRUCTION MANNUAL, C.D. AND OTHER ASSESSORIES

2

1 PHASE HALF & FULL CONTROLLED BRIDGE CONVERTER (ITB PEC 14HV4)

3

1 PHASE LOADING RHEOSTAT (PEC HV ACC1A) 3

1 PHASE INDUCTIVE LOAD (PEC HV ACC2A) 3

R, RC AND UJT FIRING MODULE (ITB PEC 14M12)

3

DC DRIVE USING JONES CHOPPER WITH DC SERIES MOTOR (1 HP, 220 V DC) (PEC 14M21A)

1

1 PHASE CYCLO CONVERTER (PEC 14M14CY) 1

DEVICE MODULE (ITB PEC 14M13) 2

555 FIRING MODULE (ITB PEC 14M13) 2

1 PHASE PARALLEL INVERTER (ITB PEC 14M7) 2

SCR, TRIAC, MOSFET & IGBT STATIC CHARACTERISTICS (PEC 16M1A)

3

VI CHARACTERISTICS OF TRIAC (PEC 16M1C) 3

VI CHARACTERISTICS OF SCR (PEC 16M1B) 3

VI CHARACTERISTICS OF DIAC (PEC 16M1D) 3

AC DRIVE TRAINER KIT 2

DC DRIVE TRAINER KIT WITH DC SHUNT MOTOR

2

SOLID STATE INDUCTION HEATING UNIT 1

PULSE TRANSFORMER FIRING CIRCUIT 1

1 PHASE SERIES INVERTER (ITB PEC 14M6) 1

3 PHASE IGBT BASED MODULE (VPET 106A) 2

CHOPPER CONTROL CIRCUTORY MODEL (ITB PEC 16M5)

1

1 HP DC MOTOR WITH SPRING BALANCE LOAD SET-UP (PEC HV ACC3A)

1

1 PHASE PWM INVERTER CONTROL (ITB PEC 16M4H1)

1

MICROPROCESSOR BASED THYRISTOR TRIGGERING CIRCUIT (PEC 18MP1)

2

3 PHASE IGBT PWM INVERTER & V/F CONTROL (ITB PEC 16HV2)

1

CATHODE RAY OSCILLOSCOPE (ST-201P6) 10

SEMICONDUCTOR DEVICES 1

SILICON CONTROLLED RECTIFIER 2

FET CHARACTERISTICS 2

TRIAC CHARACTERISTICS 2

SCR TURN ON METHOD 3

UNIVERSAL SPEED CONTROL WITH MOTOR 1

SMPS TRAINING BOARD 1

ADIRON MAKE INVERTER USING SCR BOARD 1

ADIRON MAKE EDUCATION TRAINING BOARD CHOPPER USING SCR

2

UJT RELAXATION OSCILLATOR 1

POLY PHASE RECTIFIER 1

PHASE CONTROL USING DIAC AND TRAIC 2

PHASE CONTROL RECTIFIER USIG SCR 1

PHASE CONTROL RECTIFIER USIG SCR AND UJT 2

DC MOTOR CONTROL USING SCR 2

"ALFA", 0.5 HP, HYSTERISIS MOTOR WITH PANEL

1

DC MOTOR BASED POSITION CONTROL SYSTEM (ITB PEL 01)

1

SPEED MEASUREMENT AND CLOSED LOOP OF AC SERVO MOTOR 00A

2

DC SERVO MOTOR CONTROLLER (ITB PEC-005) 1

THREE PHASE IGBT BASED POWER MODULE (VPET 106A)

1

DC AND AC TACHOGENERATOR 1

PLC REAL TIME APPLICATION DC SPEED CONTROL (VPAT 02)

1

APPLICATION OF DIODE AS HALFWAVE AND FULL WAVE RECTIFIER ETB 81

3

115-B BASIC OF ELECTRICAL ENGINEERING

SERIES AND PARALLEL RESONANCE (OMEGA TYPE ETB-30)

1

RHEOSTAT MAKE TOSHNIVAL 0.3 A 1230 OHMS 3

ADIRON MAKE EDUCATION TRAINING BOARD OHMS LAW

2

ADIRON MAKE EDUCATION TRAINING BOARD SERIES RESONANCE

2

ADIRON MAKE EDUCATION TRAINING BOARD PARALLEL RESONANCE

2

ADIRON MAKE EDUCATION TRAINING BOARD SERIES AND PARALLEL RESONANCE

2

DECADE INDUCTANCE BOX MAKE OMEGA TYPE DLI 120 V

5

DECADE RESISTANCE BOX MAKE OMEGA TYPE DRBC 115 L

3

DECADE CAPACITANCE BOX MAKE OMEGA TYPE 150 PM

5

RESISTORS, REGULATED POWER SUPPLIES, METERS TO PERFORM VARIOUS LAWS AND THEOREMS

5

CAPACITOR BANK UNIT 440V 5A 3 PHASE POWER CAPACITOR AUTO DISCHARGE

1

VERIFICATION OF OHM'S LAW ETB-128 OMEGA 1

VERIFICATION OF KIRCHOFF'S LAW ETB-120 OMEGA

1

115-C

HIGH VOLTAGE

IMPLUSE GENERATOR 1

150 KV, ENERGY 200J, NO OF STAGE-5,

1) 30 KV DC POWER SOURCE

2) 30 KV BLEEDING RESISTOR

3) CONTROL PANEL

4) 5 STAGE IMPULSE GENERATOR

5) 3 ELECTRODE TYPE TRIGGER UNIT

6) 150 KV RESISTOR DEVIDER

7) 150 KV LOADING CAPACITOR

8 ) CHARGING AND WAVE SHAPING RESISTOR

9) AUTO GROUNDING WITH STORAGE OSCILLOSCOPE 30 KV AC/40 KV DC HIGH VOLTAGE TESTING SET

1

SPHERE GAP ASSEMBLY 1

HIGH VOLTAGE TESTING TRANSFORMER CAPACITY 100 KV

1

TRANSFORMER OIL TESTING KIT 1

HIGH VOLTAGE INSULATION TESTER 1

HYPERTENSION CABLE TESTING KIT 1

CABLE FAULT LOCATION KIT 1

CAPACITANCE DIVIDER 1

PEAK VOLTMETER 1

SPHERE GAP 1

CASCADE TRANSFORMER 1

STRANDED CAPACITOR 1

COUPLING CAPACITOR 1

PARTIAL DISCHARGE MEASUREMENT INSTRUMENT

1

ELECTROLYTIC TANK 1

CORONA CAGE 1

HIGH VOLTAGE BREAKDOWN TESTER 1

2 KVA, 1 PHASE, AIR COOLED TRANSFORMER 3

3 PHASE CHOKE COIL 1

"ALFA", WELDING TRANSFORMER 1

127 ELECTRICAL MACHINE

"ALFA" 3-PHASE CAPACITOR BANK 1

3-PHASE CHOKE COIL 2

SCHRAGE MOTOR D.C. SHUNT GENERATOR SET 1

DC SERIES MOTOR - DC SERIER GENERATOR SET

1

3-PHASE AUTO SYNCHRONOUS DC SHUNT GENERATOR SET

1

"ALFA" 5 KVA DIESEL GENERATOR SET 1

"ALHA" 30 KW STATIC CONVERTER (DC POWER SUPPLY)

2

5 HP DC SYNCHRONOUS INDUCTION MOTOR 1

5 HP DC SHUNT MOTOR & 3 KW DC COMPOUND GENERATOR SET

1

DC SHUNT MOTOR AND DC SHUNT GENERATOR SET

2

DC SHUNT MOTOR 3-PHASE ALTERNATOR SET 2

DC SHUNT MOTOR 3-PHASE ALTERNAROT SET (SILENT POLE TYPE)

1

5 HP DC SHUNT MOTOR AND 3 KW DC SERIES GENERATOT SET

2

3 - PHASE SQUIREL CAGE INDUCTION MOTOR AND DC SHUNT GENERATOR

1

AC SYNCHRONOUS - DC SERIES GENERATOR SET

1

3 PHASE SQUIVREL CAGE INDUCTION MOTOR (3 HP, 3 PHASE, 440 V AC, 1440 RPM, MECHANICAL LOADING CONTROL PANEL)

1

DC MOTOR COUPLED WITH 3-PHASE SALIENT POLE TYPE ALTERNATOR AND CONTROL PANEL

2

SHUNT TYPE DC MOTOR COUPLED WITH 3 PHASE CYLINDRICAL POLE TYPE ALTERNATOR

2

SLIPRING INDUCTION MOTOR (5 HP, 440 V, 1500 RPM)

1

SYNCHRONOS MOTOR (3 HP, 3 PHASE, 415 V AC, 50 HZ, 1500 RPM)

1

"ALFA" TRANSFORMER (5 KVA, 415/240 V, 3 PHASE, 50 HZ, STAR/DELTA AIR COOLED)

2

"ALFA" POLE CHANGING INDUCTION MOTOR (2.5-5 HP, 415 V, 3 PHASE, 1500-3000 RPM, SELF FAN COOLED, CLASS-B INSULATION, FOOT MOUNTED DOUBLE WOUND SQUIRREL CAGE INDUCTION MOTOR)

1

"ALFA" CAPACITOR START SQUIRREL CAGE INDUCTION MOTOR

1

SLIPRING INDUCTION MOTOR (5 HP, 3 PHASE, 440 V AC, 1500 RPM)

1

SPLIT PHASE INDUCTION MOTOR (0.5 HP, 1 PHASE, 230 V AC, 50 HZ, 1500 RPM)

1

3 HP, 415 V AC, 3 PHASE, 50 HZ, 1500 RPM, SLIPRING INDUCTION MOTOR, 220 V EXCITATION COUPLED WITH 2 KW, 1500 RPM, CLASS B INSULATION, DC COMPOUND GENERATOR WITH CONTROL PANEL

1

SCOTT CONNECTION TRANSFORMER (2.5 KVA, 250 V, 10 A WITH 0%-50%-86.6%-100% TAPPING)

4

1 HP, 2 PHASE, AC SERVO MOTOR TORQUE CHARACTERISTICS MEASUREMENT UNIT

1

WIRE WOUND RHEOSTAT 1.2 A, 360 OHMS 5

WIRE WOUND RHEOSTAT 12 A, 9 OHMS 2

WIRE WOUND RHEOSTAT 5 A, 100 OHMS 2

WIRE WOUND RHEOSTAT 8.5 A, 38 OHMS 2

TRANSFORMER 1 PHASE DOUBLE WOUND TYPE KEW MAKE,

3

PORTABLE WATTMETER 750 W 5/10 A 0-150/300 V

2

GALVANOMETER 30-0-30 KEW MAKE 2

CHOKE COIL 1 PHASE5/10 A KEW MAKE 2

LOADING RHEOSTAT 1=SINGLE PHASE KEW MAKE

2

POWER FACTOR METER THREE PHASE THREE WIRE ELECTRODYNAMOMETER TYPE 2.5/5 A -62.5/125 V

2

POWER FACTOR METER THREE PHASE THREE WIRE 10/20 A 250-500 V

2

PORTABLE POWER FACTOR METER 5 A 250 V 2

PORTABLE WATTMETER 0-10/20 A 0-300/600 V

2

PORTABLE WATTMETER 0-1.5/3 A 0-150 V 2

SINGLE PHASE ENERGY METER 2

DC MILLI AMMETER 0-25 Ma 4

CAPACITOR BANK 230 V, 50 HZ 5 KVAR 2

CAPACITOR BANK 415 V, 50 HZ 1 KVAR 2

VARIAC 10 A 3

RHEOSTAT MAKE TOSHNIVAL 12 A 18 OHMS 2

RHEOSTAT MAKE TOSHNIVAL 5 A 50 OHMS 4





DC POTENTIOMETER (100-300 OHMS) 2

D.C VOLTMETER( 0-30/ 60 V) 3

D.C VOLTMETER( 0-150-330 V) 6

D.C VOLTMETER( 0-500- 1000 V) 3

ELECTRICAL HAND DRILL (10 MM, 400 W, 2800 RPM)

1

TRANSFORMER CUT SECTION MODEL 3 PHASE 2

AC SLIPRING INDUCTION MOTOR CUTSECTION 2

DC MOTOR/ GENERATOR CUT SECTION MODEL 2

AC SQUIRREL INDUCTION MOTOR CUT SECTION

2

ALTERNATOR TABLE TOP CUT SECTION WORKING MODEL

1

WINDING AND CONNECTION STUDY MOTOR 2

DC SHUNT MOTOR 1

CURRENT TRANSFORMER (50/5, 20/1, 10/5, 50/1, 20/1, 10/1)

12

POTETIAL TRANSFORMER (400/20, 400/15, 230/10, 230/15, 230/110)

10

TRIPPLE POLE DOUBLE THROW SWITCH (FORK SWITCH)

10

"ALFA", ROTOR RESISTANCE STARTER 3

3 PHASE SQUIRREL CAGE INDUCTION MOTOR 2

DC MACHINE CUT SECTION 1

3 PHASE INDUCTION MOTOR CUT SECTION 1

1 PHASE INDUCTION MOTOR 2

1 PHASE VARIAC (10 AMP) 5

DOL STARTER 6

STAR DELTA STARTER 5

DC 3 POINT STARTER 6

1 PHASE CHOKE COIL 4

ISOLATION TRANSFORMER 3

AUTO TRANSFORMER STARTER 3

SINGLE PHASE LOAD BANK 3

DIGITAL TACHOMETER ATLUTRON-DT-2236 5

THREE PHASE 0.5 HP AC INDUCTION MOTOR 1

DIGITAL MULTIMETER METRAVI 540 3

AMMETER MOVING IRON PORTABLE TYPE 0-1/2 A AC (MECO-V)

5


AMMETER MOVING COIL PORTABLE TYPE 0-100uA DC (MECO-V)

5

VOLTMETER MOVING COIL PORTABLE TYPE 0-15/30/75 V DC

5


AMMETER MOVING IRON PORTABLE TYPE 0-1/2 A AC (MECO-V)

5

VOLTMETER MOVING COIL PORTABLE TYPE 0-15/30/75 V AC

5


5


5



5


5


5

PORTABLE DYNAMOMETER TYPE WATT METER SINGLE PHASE SINGLE ELEMENT UPF WATTMETER (0-5 A, 500 V)

5

COMPACT DIGITAL TACHOMETER METRAVI DT 2234C

5

ELECTRONIC SYNCHROSCOPE METRAVI 1

PHASE SEQUENCE INDICATOR METRAVI 2

POWER FACTOR METER THREE PHASE TWO ELEMENT THREE WIRE BALANCED/UNBALANCED LOAD 0/10 A, 110/440 V

5

VAR METER THREE PHASE THREE WIRE TWO ELEMENT MEC0-G 0-2.5/5 A , 110/440 V

2

DIGITAL CLAMP ON METER METRAVI-DT 3250 3

FREQUENCY METER SINGLE PHASE PORTABLE TYPE MEC0-V

2

ELECTRODYNAMOMETER TYPE PORTABLE WATTMETER SINGLE PHASE SINGLE ELEMENT

5

CURRENT TRANSFORMER AIR COOLED TYPE 3

POTENTIAL TRANSFORMER AIR COOLED TYPE 3

CURRENT TRANSFORMER AIR COOLED TYPE (5 - 1200A (25 RANGES) AND SECONDARY CURRENT OF 5 A(2 NOS) AND 1A(2NOS) WITH BURDEN = 5VA, 1 PHASE 50 HZ

2

POTENTIAL TRANSFORMER AIR COOLED TYPE (6.6 KV AND SECONDARY 110V WITH BURDEN = 5VA, 1 PHASE, 50 HZ

3

DPST KNIFE BLADE SWITCH CNC MAKE CENTER STORE 10 A 230 V

5

VARIAC DIMMER STATE MAKE AGRONIC INPUT 415 V 50 HZ, OUTPUT 0-470 V 0-10 A 3 PHASE

5

STANDARD RHEOSTAT BENN 10 A 20 OHMS 5

LOADING RHEOSTAT STANDARD BENN 1 PHASE 240 V 50 HZ 7.5 KW IN STEP OF 375 WATTS 20 SWITCHING SEQUENCES

3

POWER LAMP LOAD MAKE BENN 3 PHASE STEP OF 1 AMP UPTO 10 AMP PER PHASE ENCLOSED AND PORTABLE TYPE

5

WINDING STUDY MOTOR MAKE BENN AC 3 PHASE 3 HP 440 V 1440 RPM

1

CUT SECTION OF AMPLIDYNE MOTOR MAKE BENN

1

CUT SECTION OF REPULSION MOTOR MAKE BENN

1

CUT SECTION OF COMMUTATOR MOTOR MAKE BENN

1

CUT SECTION OF COMPOUND DC MOTOR 1 HP MAKE BENN

1

COIL WINDING MACHINE MOTORISED MAKE ACME

1

SINGLE DIAL RESISTANCE BOX MODEL DRBC 115 U

5

DECADE CAPACITANCE BOX MAKE OMEGA

ENERGY METER SINGLE PHASE 240 V 5-10 A MAKE- JAIPUR( SUPPLIED BY MITRAVI)

1

ENERGY METER 3 PHASE 240 V 10 A 1500 REV/ KWH

1

GALVANOMETER RANGE (30-0--30 V) MAKE MACOV

2

DECADE INDUCTANCE BOX MAKE OMEGA

AMMETER MAKE-MECOV, RANGE: 0-10/20 A AC 5

VOLTMETER MAKE-MECOV, RANGE: 0-75/150/300 V AC

5

WATTMETER (UPF) MAKE : MECOG, RANGE: 0-5/10 A, 150/300V,750/1500W

10

WATTMETER (LPF) MAKE : MECOG, RANGE: 0-5/10 A, 75/150/300V

5

FLUX METER, MAKE- MITRAVI, MODEL- EMF822

1

DIGITAL CLAMP METER, MAKE - METRAVI, MODEL - DT-5250

5

DIGITAL MULTIMETER , MAKE : METRAVI 603 5

MODELS OF DC STRARTER, MAKE - BENN

MODEL OF FULLY AUTOMATIC STAR DELTA STARTER , MAKE - BENN

1

OPEN MODEL OF SEMI AUTOMATIC STAR DELTA STARTER, , MAKE - BENN

1

PCB DESIGNING TOOLS, PCB DRILLING MACHINE, MAKE : PRESCENT, MODEL - PHOTO DRILL3000

1

PCB CUTTING MACHINE, MAKE : PRESCENT, MODEL - SLASH 300

1

IRON PLATES 2

BRASS PLATES 2

DC VARIABLE DUAL POWER SUPPLY 0-30 V, 2 A MODEL 93B MAKE TESTRONIX

1

DC SUPPLY 5 V FIXED MODEL 532 TESTRONIX 1

306-A CONTROL SYSTEM PROCESS CONTROL SIMULATOR (TIB PCS 01) 1

LEAD LAG NETWORK COMPENSATOR (VLLN01) 1

STEPPER MOTOR CONTROLLER TRAINER (VSMT 02)

1

RELAY CONTROL SYSTEM (VRCS 01) 1

STEPPER MOTOR CONTROLLER TRAINER (VSMT 02)

1

306-B

POWER SYSTEM CONDUCTOR CLAMP 1

VOLTMETER SELECTOR SWITCH 5

AMMETER SELECTOR SWITCH 5

"GEC" INSTANTANEOUS CURRENT RELAY O/C E/F (TYPE-CAG-14)

1

OVERCURRENT RELAY (TYPE: CDG-11) 2

EARTH FAULT RELAY (TYPE: CDG-11) 2

"GEC" INSTANTANEOUS UNDER VOLTAGE AND OVER VOLTAGE RELAY WITH ADJUSTABLE SETTINGS (TYPE-VAGM-22)

2

"GEC" A THREE ELEMENT AUXILLARY RELAY (TYPE:-VAA-33)

2

"GEC" SELF POWERED DIRECTIONAL INVERSE TIME OVER CURRENT RELAY AND DIRECTIONAL TIME EARTH FAULT RELAY (TYPE-CDD-21)

1

"GEC" MAKE SINGLE POLE HIGH SPEED TRIPPING RELAY WITH HAND RESET (TYPE-VAJH-13)

2

"GEC" STATIC DEFINITE TIME UNDER VOLTAGE RELAY (TYPE-VTVM-21)

1

POLY PHASE METER 3 PHASE 3 WIRE-415 V 2

POLY PHASE ENERGY METER 3 PHASE 3 WIRE-240 V

2

PHASE SEQUENCE INDICATOR 5

DIGITAL TIME INTERVAL METER 2

BOUNCE/TIME INTERVAL METER 1

INSTANEOUS HIGH STABILITY CIRCULETING CURRENT RELAY FOR EARTH FAULT OF GENERATOR, TRANSFORMER, BUSBAR, ETC (S POLE UNIT) CAG-14 (E/F RELAY)

2

A SINGLE POLE RELAY WHICH CAN BE USED FOR SELECTIVE PHASE EARTH FAULT PROTECTION IN TIME GREADED SYSTEM FOR AC MACHINE, TRANSFORMER ETC.

2

GENERALLY APPLICABLE FOR OVER CURRENT PROTECTION IN AC CIRCUIT (TYPE-CDG-11)

TIME OVER CURRENT RELAY (DD- 21CB) 1

INVERSETIME EARTH FAULT RELAY (DD- 21CB)

1

FIVE ELEMENT VOLTAGE OPERATIONAL HIGH SPEED TRIP RELAY

1

SEMAPHORE INDICATOR FOR AUTOMATIC INDICATION ON MIMIC DIAGRAM OF POSITION (OPEN OR CLOSE) OF CIRCUIT BREAKERS, ISOLATORS & REMOTE SWITCHES (TYPE-VAM-12)

2

PLUG IN VOLTAGE OPERATED AUXILIARY RELAY (TYPE-VAA-11(VP))

2

MAXIMUM DEMAND METER PART-1 1

3 PHASE, 4 WIRE CT OPERATED KWH/ KVAH METER WITH MD1 PART-2

1

MICROCONTROLLER BASED OVER/UNDER VOLTAGE RELAY VPL 05

1

ELECTROMECHANICAL TYPE UNDERVOLTAGE RELAY VPST-103B

1

ELECTROMECHANICAL BASED DIRECTIONAL OVERCURRENT RELAY TRAINER VPL-81A

2

MICROCONTROLLER BASED NEGATIVE SEQUENCE RELAY TRAINER

1

AC MOTOR PROTECTION RELAY TEST SET UP VPST-97/1

1

ELECTROMECHANICAL TYPE EARTH FAULT RELAYVPL-04A

1

FEEDER PROTECTION TESTING KIT 1

NUMERICAL TRANSFORMER PROTECTION RELAY TRAINER

1

GENERATOR PROTECTION SYSTEM VPST-100/1 1

NUMERICAL 3 OVERCURRENT AND NUMERICAL 2 OVERCURRENT 1 EARTHFAULT RELAY

1

BUCHHOLZ RELAY TRAINER VPL-84 1

PORTABLE RELAY TESTING KIT 1

List of Experimental Setup in each Laboratory/ Workshop

SUBJECT ROOM NUMBER

SR NO

PLANNED PRACTICAL

CN 212-A 1 To measure and calculate currents and voltages for a given resistive circuit and verify KCL and KVL.

2 To verify superposition theorem experimentally for a given resistive circuit consisting two independent sources.

3 To verify Thevenin’s theorem experimentally for a given circuit.

4 To verify maximum power transfer theorem experimentally for a given circuit.

5 To verify reciprocity theorem experimentally for a given circuit.

6 To measure and calculate RC time constant for a given RC circuit.

7 To measure and calculate Z-parameters for a given two-port system.

8 To measure and calculate Y-parameters for a given two-port system.

9 To measure and calculate h-parameters for a given two-port system.

10 To measure and calculate ABCD-parameters for a given two-port system.

MICRO PROCESSOR

212-B 1 Data moving operations

2 Logical operations

3 Arithmetic operations

4 Branching operations

5 Find the Largest Number in a array of numbers

6 Arranging the array of numbers in ascending order

7 Hexadecimal to ASCII code conversion

8 Frequency Measurement

9 Data transfer between 8051 microcontroller kit and IBM PC using serial port

10 Matrix Keyboard interfacing with 89C51

INSTRU- MENTATION

212-C1 1 To obtain the characteristics between strains applied to the cantilever beam strain sensor and bridge voltage

2 To obtain the characteristics of LVDT position sensor with respect to the secondary output voltage and measure the voltage due to the residual magnetism.

3 To obtain the characteristics of LVDT position sensor with respect to the signal conditioned output voltage

4 To obtain the characteristics between applied load and the bridge voltage of load cell.

5 To obtain the characteristics between applied load and the output voltage of load cell.

6 To measure the liquid level in the process tank using ultrasonic transmitter.

7 To obtain the characteristics of level transmitter.

8 To measure liquid level using strain gauge type load cell sensor.

9 To measure temperature using resistance thermometer (RTD).

10 To measure temperature using thermocouple.

11 To measure temperature using Thermistor.

12 To measure the stator output voltage with respect to rotor position and plot a graph.

13 To measure the change in stator position with respect to rotor position.

14 To obtain the characteristics of the pressure cell with respect to bridge voltage.

15 To obtain the characteristics of the pressure cell with respect to signal conditioned output voltage.

MEASUREMENT

212-C2 1 To measure the value of resistance by Wheatstone Bridge.

2 To measure the value of resistance by Kelvin’s Double Bridge.

3 To measure value of unknown capacitance by Schearing’s bridge.

4 To measure unknown inductance by & demonstrate operation of Maxwell's bridge.

5 To measure value of unknown capacitance by Owen’s bridge.

6 To measure unknown inductance by Hays Bridge

7 To measure unknown inductance by Anderson Bridge

8 To demonstrate distance measurement using LVDT.

9 To measure value of unknown inductance and capaciitance using LCR meter.

10 To measure high resistance and insulation resistance using Megger.

AE 212-D1 1 To study class B push pull amplifier.

2 To study and measure the OPAMP parameters.

3 To study & verify, an op-amp as inverting and non-inverting amplifier.

4 To study & verify, an op-amp as summing, scaling and averaging circuits.

5 To study and verify, an op-amp as differentiator and integrator circuit.

6 To study and verify OPAMP as inverting and non-inverting comparator.

7 To study and verify OPAMP as square, pulse, sawtooth and triangle waveform generator.

8 To study and verify OPAMP as active filters.

9 To study & verify astable and monostable multivibrator using IC 555 timer circuit.

10 To prepare a DC power supply using voltage regulator ICs.

DE 212-D1 1 To verify the truth table of logic gates.

2 To verify the universality of the NAND and NOR gates by implementing various logic gates.

3 To verify the function of half and full adder.

4 To verify the function of half and full subtractor.

5 To verify the function of encoder.

6 To verify the function of decoder.

7 To study & verify the operation of multiplexer and demultiplexer circuit.

8 To study & verify the operation of magnitude comparator circuit.

9 To verify the function of Latch and flip-flop.

10 To study the operation of registers.

11 To study the operation of counters.

BE 212-D2 1 To observe sine wave, square wave, triangular wave and ramp waveforms on the C.R.O. and to measure amplitude and frequency of the waveforms.

2 To obtain V-I characteristics of PN junction diode

3 To obtain V-I characteristics of Zener diode

4 To observe waveform at the output of half wave rectifier with and without filter capacitor. To measure DC voltage, DC current, ripple factor with and without filter capacitor.

5 To observe waveform at the output of bridge rectifier with and without filter capacitor. To measure DC voltage, DC current, ripple factor with and without filter capacitor.

6 To observe waveforms at the output of clamper circuits.

7 To observe waveforms at the output of clipper circuits.

8 To obtain common emitter characteristics of NPN transistor.

9 To obtain common base characteristics of NPN transistor

10 To obtain common collector characteristics of NPN transistor.

COMPUTER LAB

212 -E 1 To study Vector Analysis using MATLAB

2 To calculate Surface and Volume integrals using MATLAB

3 To calculate the electric field at point in space due to linear charges using MATLAB

4 To calculate the electric field at point in space due to sheet charges using MATLAB

5 Introduction to MATLAB and Simulink (Theory).

6 Implement MATLAB Program

7 Generation of basic CT signals

8 Generation of basic DT signals

9 Discretization of CT signals (Sampling theorem).

10 Performing various operations on signals

11 To perform convolution.

12 To perform Z-Transform.

13 To perform DFT

PE 115/A 1 To study and verify the characteristics of MOSFET & IGBT.

2 To study and verify the characteristics of SCR, DIAC & TRIAC.

3 To study and perform 1- phase half controlled and fully controlled rectifier.

4 To study and perform series inverter

5 To study and perform parrallel inverter.

6 To study and perform 1-phase ac voltage controller using phase-control principle.

7 To study and perform speed control of Induction Motor using stator voltage control.

8 To study and perform speed control of DC motor by varying armature applied voltage with single phase controlled converter.

9 To study and perform speed control of DC motor by using Jones Chopper.

10 To study and perform 1-phase CYCLO CONVERTER.

BEE 115 B 1 To study the standard symbols generally used in Electrical Engineering.

2 State and Verify Kirchoff’s Laws.

3 To study and verify the Thevenin’s theorem.

4 Measurement of Inductance and power factor in R-L series circuit.

5 Measurement of Capacitance and power factor in R-C series circuit.

6 Measurement of power factor in R-L-C series circuit by analytically and graphically

7 To study the relationship between line voltage and phase voltage in star connection and line current and phase current in Delta connection.

8 To measure power in a three phase circuit by two wattmeter method and find power factor of the balanced three phase circuit.

9 Study of the construction of DC Machine and Demonstration of its cut-section.

10 Study of Electric Power supply and safety devices.

HVE 115-C 1 To Perform Experiment to obtainBreakdown Strength Of Transformeroil

2 To Perform Experiment to obtain breakdown strength of various solid Insulations.

3 To Perform Experiment to obtain breakdown strength of Cable insulation of 66KV transmission line.

4 To study impulse voltage generator using Virtual lab.

5 To perform experiment with electrolytic tank to trace equi-potential and electric field lines for different types of electrodes.

6 To measure insulation resister with High voltage insulation tester.

7 To study impulse current generator using Virtual lab.

8 To study critical flashover of a sphere gap using impulse voltage generator using Virtual lab.

9 To perform experiment of 3 stage cocroft Walton voltage multiplier circuit using Virtual lab.

10 To study high voltage laboratory.

MACHINE LAB

127 1 To perform open circuit test & short circuit test on Three Phase Alternator.

2 To perform open circuit test & short circuit test on Single Phase Transformer.

3 To perform load test on Three Phase Alternator.

4 To obtain V Curves and Inverted V curves of Three Phase Synchronous Motor.

5 To perform No load test on Three Phase Induction Motor.

6 To perform Blocked Rotor Test on Three Phase Induction Motor.

7 Determine full load parameters of Three Phase Induction Motor using No load & Blocked Rotor Test.

8 Determine the voltage regulation of 3-phase alternator by Synchronous impedance (EMF) method.

9 Determine the voltage regulation of 3-phase alternator by MMF Method.

10 Study of starters of DC & AC Machines.

11 To perform Sumpener Test on two identical single phase transformers.

12 To perform speed control of DC machine by armature voltage control & field control method.

13 To obtain Magnetizing Characteristics, Internal & External Characteristic of Self Excited DC ShuntGenerator. Also obtain the critical field resistance of the machine from magnetizing Characteristics.

14 To conduct direct load test on a D.C. compound generator with a) Shunt field alone b) Cumulative and differential compounding for short and long shunt connections.

15 To obtain Speed-Torque characteristics of DC Series Motor and DC Shunt Motor

16 To determine the efficiency of two similar shunt machines by regenerative method. (Hopkinson’s Test.)

17 To perform field test on identical D.C. series machines.

http://em-coep.vlabs.ac.in/Exp3/Theory.html?domain=Electrical%20Engineering&lab=Welcome%20to%20Electrical%20Machines!




18 To perform direct load test on a D.C. shunt motor and plot variation of (a) Input current (b) Speed (c) Torque (d) Efficiency versus output power.

19 To perform Swinburn’s test on DC shunt motor to find out its efficiency

20 To perform brake test on DC shunt motor.

CST 306-A 1 Introduction to Control Systems.

2 Introduction to MATLAB.

3 Introduction To Basics of MATLAB Program

4 Represent the Given Transfer Function by Using MATLAB in Terms of Z (Zero), P (Pole) and K (Gain).

5 To Find Out The Overall Transfer Function For The Series, Parallel And Feedback System Using MATLAB Function.

6 To Find Out The Overall Transfer Function For The System Using MATLAB Function.

7 Obtain the state space model of the given system.

8 Represent Graphically Time Response of a First and Second Order Control System.

9 For Unity feedback Control System with Given Transfer Function Plot Root Locus of the System.

10 For Unity feedback Control System with Given Transfer Function Obtain Bode Plot of the System.

SGP 306-C 1 To study construction and demonstrate operation of Buchholz Relay through virtual lab.

2 To plot the magnetization characteristics of a given current transformer.

3 To plot and Compare operating characteristics of inverse, IDMT and DMT over-current relays.

4 To Design time-current coordination of relays for transmission line for backup protection

5 To verify the circulating current differential protection scheme

6 To study parallel feeder protection on the simulation of parallel feeder protection scheme.

7 To Simulate and verify restricted earth fault protection of transformer using PSIM.

8 To study Numerical Protection.

9 To Study A. SF6 Circuit Breaker B. Vacuum Circuit Breaker

10 To Study A. Air Blast Circuit Breaker B. Minimum Oil Circuit Breaker

Environmental Engineering Department

List of Major Equipment/Facilities in each Laboratory/ Workshop Room No Lab Name Name of Equipment Quantity

103 A Environmental

Chemistry 1

pH meter 1

Turbidity Meter 1

Microprocessor

Conductivity/TDS/Salinity/Temp Meter 1

Filter Assembly with Pump 1

Water distillation Apparatus 1

103 B Fundamentals of

Wastewater Quality

Hot Air Oven 1

Refrigerator 1

Analytical Weighing Balance 1

103 C Fundaments of Air

Pollution Digital Sound Level Meter 1

104 A

Physico-Chemical

Treatment

Technologies

Magnetic stirrer 1

Bench top Stirrer 1

Hot plate 1

Water bath 8 LTS 1

Jar Test Apparatus 1


SUBJECT No. PLANNED PRACTICAL

Biological

Processes for

Wastewater

Treatment

1 Determination of COD of given wastewater sample

2 Determination of BOD of given wastewater sample

3 Determination of TOC of given wastewater sample

4 To find BOD reaction rate constant for given sample

5 To find rate of re-aeration of tap water

6 Determination of biokinetic constants for aerobic suspended

growth treatment

7 Determination of biokinetic constants for aerobic attached growth treatment

1 Determination of turbidity from water sample using Nephelo

turbidity meter

Advanced

Environmental

Instrumentation

2 Determination of flouride concentration in drinking water using spectrophotometer

3 Colorimetric analysis for copper using UV-Vis spectrophotometer

4 Preparation of calibration curve of chromium using UV- Vis

spectrophotometer

5 Determination of metals (chromium/nickel/copper/arsenic) using

Atomic Absorption Spectrophotometer

6 Determination of cations and anions using Ion-Chromatograph

7 Determination of TOC from wastewater using TOC analyzer

Physico-

Chemical

Treatment

Technologies

1 Determination of optimum coagulant dose using multiple Jar Test

Apparatus

2 Determination of effect of coagulant dose on pH and alkalinity of

water

3 To measure Ammonical Nitrogen from waste water

4 Determination of Residual Chlorine in drinking water

5 Determination of removal efficiency in Type I settling using Settling

Column

Fundamentals of

Air Pollution

1 Measurement of Ambient Air Quality Parameters using High

Volume Air Samplers

2 Measurement of Sound Pressure Levels at different locations

Municipal

Engineering

1 To collect drinking water samples and check drinking water quality

parameters as per IS :10500

2 To determine residual chlorine from tap water

Municipal &

Industrial Solid

Waste

management

1 Determination of composition of MSW

2 Determination of moisture content of MSW

3 Determination of calorific value of solid waste

4 Determination of volatile matter in MSW

5 Determination of fixed carbon in MSW

Fundamentals of

Wastewater

Quality

1 Determination if acidity of water and wastewater samples

2 Determination of sulphates from water and wastewater samples

3 Determination of DO from water and wastewater samples

4 Determination of COD from wastewater samples

5 Determination of BOD from wastewater samples

6 Determination of oil and grease from wastewater samples

7 Determination of Ammonical nitrogen from wastewater samples

8 Determination of pH in the given sample of effluent using digital pH

meter

9 Determination of Total Dissolved Solid of the given sample of effluent

10 Determination of Calcium Hardness of given wastewater sample

Environmental

Microbiology

and

Bioremediation

1 To determine MPN of given water sample

2 Familiarization with labware in instruments used in environmental

engineering laboratory

3 Calibration of different glass wares & Instruments (pH meter and

Weigh balance)

4 To determine pH of given water and wastewater samples

5

To Determine Total solids (TS), Total suspended solids (TSS) and

Total dissolved solids (TDS) for given water and wastewater

samples

6 To determine Total Hardness , Calcium Hardness and magnesium

hardness from given water samples

7 To determine Alkalinity (Phenolphthaleine and Methyl orange

Alkalinity) from given water samples

8 To determine Chloride from given water and wastewater samples

Basics of

Environmental

Hydraulics

1 Measurement of viscosity

2 Study of pressure measurement devices

3 Study Characteristics of Laminar and Turbulent flows (Reynolds

experiment)

4 Calibration of flow measuring devices (Venturimeter, Orificemeter)

5 Calibration of Rectangular and V notch.

Electronics and Communication Department


S r N o . R o o m N o . N a m e o f t h e l a b N a m e o f t h e e u i p m e n t Q u a n t i t y

1 104 VLS I

Te s t in g & Ve r i f i c a t ion

De v ic e Dr ive r

C P LD De ve lopm e n t P l a t e f o r m 1

2 104 M ic r op r oc e s so r

M ic r o c on t r o l l e r

Adva nc e M ic r o p r oc e s so r

Em be de d S y s t e m

8085 M ic r op r oc e s s o r T r a ine r 2

AR M P r oc e sso r Ta i ne r B oa r d 1

8051 Tr a ine r B oa r d 1

R a spbe r r y P i 10

3 104 S c ie n t i f i c M a ke Dua l T r a c e Osc i l l o sc ope 1

S igna l & S ys t e m

DS P

I m a ge Pr oc e s s in g

S DT

DC P owe r S up p ly 1

F unc t io n Ge ne r a to r 1

D ig i t a l M ul t i m e te r 1

4 203 Dig i t a l E le c t r on ic s D ig i t a l I C t e s t e r 1


Dig i t a l M ul t i m e te r 1

S c i e n t i f i c M a ke Dua l T r a c e Osc i l l o sc ope 1

5 203 B a s i c E le c t r on ic s

Ana lo g E le c t r on ic s

E le c t r on ic De v ic e & C i r c u i t




D iode C ha r a c t e r i s t i c s T r a ine r 1

F e e dba c k Am pl i f i e r T r a ine r 1

R e c t i f i e r T r a ine r k i t w i t h F i l t e r C a pa c i to r 1

C l ippe r c i r c u i t s T r a ine r K i t . 1

C la m pe r c i rc u i t s T r a ine r K i t . 1

P ho to d iode Tr a ine r K i t 1

T r a ns i s t o r a s a swi t c h Tr a ine r 1

C om m on Em i t t e r a m pl i f i e r T r a ine r 1

F re que nc y r e sp on se o f s ing le s t a ge t r a ns i s t o r a m pl i f i e r T r a ine r 1

Ne ga t ive F e e dba c k A m pl i f i e r T r a ine r 1

C E Am p l f i e i r w i th Vo l t a ge S e r i e s & c u r r e n t S er i e s Ne ga t i ve F e e dba c k 1

P ush P u l l Am pl i f i e r T r a ine r 1

C la s s A Tr a ns f o r m e r C oup le d Am pl i f i e r T r a ine r 1

F ET C hs . B oa r d 1

L ine a r I C t e s t e r 1

OP - AM P Tr a ine r K i t 2

6 203 C i r c u i t a nd ne t wor k

C on t r o l S y s t e m

Eng i ne e r ing E le c t r om a g ne t i c s

EM M I

Ne twor k The or e m Tr a ine r K i t 1

Two P or t Ne tw or k Tr a ine r 1




7 203 M in i P r o j e c t

De s ig n En g ine e r ing

E le c t r on ic W or ksh op

R e se ar c h P r o j e c t




S o lde r ing I r on


C om po ne n t s

8 203 P owe r E le c t r on ic s

I ndus t r i a l Au to m a t ion

S c ie n t i f i c M a ke Dua l T r a c e Osc i l l o sc ope 1

9 303 TS S N

Ana lo g C om m unic a t io n





AM R e c e ive r T r a ine r k i t 1

AM Tr a nsm i t t e r T r a ine r k i t 1

F M M OD UL A TI ON DE M O DU LA TI O N KI T 1

10 303 Dig i t a l C om m u nic a t ion S c ie n t i f i c M a ke Dua l T r a c e Osc i l l o sc ope 1


11 303 M ic r owa ve En g ine e r in g

Wi r e l e s s C om m unic a t i on

S a te l i t e C om m unic a t i on

S c ie n t i f i c M a ke Dua l T r a c e Osc i l l o sc ope 1

M ic r owa ve B e nc h Wi th VS WR M e te r 1

12 303 An te n na & Wa ve P r op oga t i on

13 303 F ibe r Op t i c F ibe r Op t i c T r a ine r K i t 1


14 303 Aud i o a nd v ide o s ys t e m Lou dspe a ke r T r a ine r 1

M ic r opho ne s Tr a ine r 1


Sr

No. Name of the lab Name of the euipment Quantity

1 Electronic Device &

Circuit

Scientific Make Dual Trace Oscilloscope 9

DC Power Supply 3

Diode Characteristics Trainer 1

Feedback Amplifier Trainer 1

Rectifier Trainer kit with Filter Capacitor 1

Clipper circuits Trainer Kit. 1

Clamper circuits Trainer Kit. 1

Photo diode Trainer Kit 1

Transistor as a switch Trainer 1

Common Emitter amplifier Trainer 1

Frequency response of single stage transistor

amplifier Trainer 1

Negative Feedback Amplifier Trainer 1

CE Amplfieir with Voltage Series & current

Series Negative Feedback 1

Push Pull Amplifier Trainer 1

Class A Transformer Coupled Amplifier

Trainer 1

FET Chs.Board 1

2 Analog Circuit Design


DC Power Supply 1

OP-AMP Trainer Kit 2

3 Digital Electronics Digital IC tester 1

Linear IC tester 1

4 Communication

Engineering


DC Power Supply 1

AM Receiver Trainer kit 1

AM Transmitter Trainer kit 1

FM MODULATION DEMODULATION KIT 1

5 Microprocessor 8085 Microprocessor Trainer 2

6 Micro controller ARM Processor Tainer Board 1

8051 Trainer Board 1

7 Microwave Engineering Scientific Make Dual Trace Oscilloscope 1

Microwave Bench With VSWR Meter 1

8 Fiber Optic Fiber Optic Trainer Kit 1


9 VLSI CPLD Development Plateform 1

10 Circuit and network Network Theorem Trainer Kit 1

Two Port Network Trainer 1

11 Audio and video system Loudspeaker Trainer 1

Microphones Trainer 1

Civil Department


Sr. Name of the Equipment Manufacturer Name of Laboratories

1 Tensile testing machine 1000kgf EIE Mechanics of solids

2 Vickers cum brinell hardness testing m/c 120

kgf

EIE

Mechanics of solids

3 Torsion testing m/c EIE Mechanics of solids

4 Fatigue testing m/c EIE Mechanics of solids

5 Automatic Universal Testing Machine EIE Mechanics of solids

6 consolidation apparatus EIE Geotechnical Engineering

7 Universal Triaxial outfit with electronic

instrumentation system

AIMIL Ltd.

Geotechnical Engineering

8

Direct shear apparatus,electronic consisting

of AIM-104 & AIM-10501

AIMIL Ltd.


9 In-situ vane shear test apparatus EIE Geotechnical Engineering

10 Permiability apparatus 3cell model with foot

pump & stand


11 Cement Autoclave EIE Concrete Technology

12 reinforcement corrosion meter EIE Concrete Technology

13 Rebar locator EIE Concrete Technology

14 electronic concreete test hammer EIE Concrete Technology

15 Automatic compression testing m/c. 3000KN HEICO Concrete Technology

16 Los angeles abrasion testin m/c EIE Concrete Technology

17 Flecure testing m/c. 100KN EIE Concrete Technology

18 Flexure testing m/c. 4KN EIE Concrete Technology

19 Ultrasonic pulse velocity meter AIMIL Ltd. Concrete Technology

20 Servo controlled dynamic universal testing

machine- 10 tonnes capacity HEICO Concrete Technology

21 Prestressing Jack AIMIL Ltd. Concrete Technology

22 Relative Density Apparatus AIMIL Ltd. Concrete Technology

23 Static cone Penetro meter 30KN AIMIL Ltd. Concrete Technology

24 Shake table AIMIL Ltd. Earthquck Engineering

25 OR36-8 CH FFT analyser AIMIL Ltd. Earthquck Engineering

26 Kelunji eco seismic recorder with CMG-3T

seismic re

AIMIL Ltd.

Earthquck Engineering

27 Prestressing Jack AIMIL Ltd. Soil Mechanics

28 Relative Density Apparatus AIMIL Ltd. Soil Mechanics

29 Static cone Penetro meter 30KN AIMIL Ltd. Soil Mechanics

30 Marshal apparatus AIMIL Ltd. Soil Mechanics

31 uv-vs spectrophotometer

EIE Environment Engineering

32 B.O.D. incubetor

EIE Environment Engineering

33 Iron selective meter

EIE

Environment Engineering

34 Deval abrasion testing m/c

EIE Transportation

Engineering

35

Micro Optic Theodolite

EIE

Surveying

36 GPS Remote sensing system

EIE

Surveying

37 Automatic Rain Gauge Observator

EIE

Fluid Mechanics

38 Ductility Test Apparatus

EIE Transportation

Engineering

39 Los angeles abrasion testin m/c

EIE Transportation

Engineering



Sr. No Name of

Laboratory

No. of

Students

per setup (

Batch size)

Name of Important Equipments Quantity

Weekly utilization

status (all the courses

for which the lab is

utilized)hrs

Room No Year of

Purchase

1

Chemistry/

Organic

chemistry/

Physicaland

lnorganic

chemistry

20

1. pH meter Apparatus 1 16

CH-003 A

2019

2. Kjeldah Appratus 1 2 2017

3. Weighing balance Apparatus 1 20 2017

4. Polarising microscope model 1 2 2011

5. Melting point appratus 1 2 2010

2

Chemical

Reaction

Engineering

15

1. RTD study using Continuous stirred tank Reactor 1

12 CH-003 C

2017

2. RTD study using Plug flow Reactor 1 2017

3. RTD study using Annular reractor 1 2017

4. Fluidized bed reractor 1 2020

3 Fluid Flow

Operations 20

1.venturimeter 1

6 CH-004 A

2010

2.orificemeter 1 2010

3.rotameter 1 2010

4.bernoulli study 1 2010

5.centrifugal pump 1 2010

6.reciprocating pump 1 2010

7.notch apparatus 1 2010

8.pitot tube 1 2010

9.energy losses in pipes 1 2010

10.energy losses in fittings 1 2010

11.Reynolds apparatus 1 2010

4 Heat transfer 20 1. Composite Wall 1 6 CH-004 B 2010

2. Metal Rod 1 2010

3.Insulating Powder 1

4. Emissivity Apparatus 1 2010

5. Shell & Tube Heat Exchanger 1 2010

6. Heat Transfer By Natural Convection 1 2010

7. Heat Transfer By Drop wise and Film Wise

Condensation 1

8. Critical Radius of Insulating Material 1 2010

9. Thermal Conductivity Of Liquid 1 2010

10. Pin Fin Apparatus 1 2010

11. Unsteady State Heat Transfer 1 2010

5 Mechanical

Operation 15

1. Sheve Shaker Apparatus 1

12 CH-004 C

2011

2. Forth Floatation Apparatus 1 2011

3. Jaw Crusher 1 2011

4. Basket Centrifuge 1 2011

6 IPC 15

1. Interacting and Non Interacting system 1

12 CH-004 D

2019

2. Measurement of Air purge Apparatus 1 2017

3. Temperature measurement using Thermocouple 1 2017

7 AST 15 1. Ion exchange Unit 1 12 CH-004 A 2011

8 Mass Transfer

Operation 15

1. Air - vapor diffusion 1 12 CH-014 A

2. Water bath 1 2011

9

Petroleum

refineries and

petrochemicals

15

1 CLEAVELAND FLASH & FIRE POINT

APPARATUS 1

12 CH-003 D

2018

2.ASTM Distillation apparatus 1 2018

3. Smoke point apparatus 1 2018

4.Aniline point apparatus 1 2018

Innovation Cell

GOVERNMENT ENGINEERING COLLEGE, BHUJ has applied for the grant under

SSIP (Student Startup and Innovation Policy) Phase – V.

Institute was allotted grant of Rs.5, 00,000/- for SSIP activities.

M.o.U. between GKS (Gujarat Knowledge Society) and GEC-Bhuj was done on 31st

May,2019

Institute Scrutiny Committee, IPR Scrutiny committee, Institute level committee were

formed as per directives of GKS.

52 faculties are registered as mentor from various departments.

For year 2019-20 following activities were conducted:

Sensitization Program

1) For enlightening students regarding startups and SSIP policy sensitization

programs were conducted.

2) At departmental level various sensitization programs where conducted

wherein 563 students were sensitized.

Scrutiny of projects

1) Proposals were invited from students for availing SSIP grants.

2) First level of scrutiny was carried out at departmental level, from which 17

innovative projects were scrutinized and sent to institute scrutiny

committee.

3) Institute scrutiny committee short-listed 08 projects for availing SSIP grants

on basis of various parameters such as innovation, research, social

application of projects etc.

4) 01 project requiring funding more than Rs. 50,000/- is forwarded to institute

level scrutiny committee.

5) Total 08 proposals were sanctioned with amount of Rs. 1,04,500/-

Workshop

For enhancing entrepreneurial skills one day workshop on “Innovation at Grass-Root Level”

was organized on 24th February, 2020 in association with IIC-PDPU, Gandhinagar. Around

143 students actively participated in the same. Fund of Rs. 10,817.5 was utilized for this

workshop.

For year 2020-21 following activities are conducted till date:

Sensitization Program

1) For enlightening students regarding startups and SSIP policy sensitization

programs were conducted. Owing to ongoing pandemic, sensitization

program were carried out in online mode through MS Team platform.

2) At departmental level various sensitization programs where conducted

wherein 459 students were sensitized.

Scrutiny of projects

1) Proposals were invited from students for availing SSIP grants.

2) First level of scrutiny was carried out at departmental level, from which 23

innovative projects were scrutinized and sent to institute scrutiny

committee.

3) Owing to ongoing pandemic, institute scrutiny were carried out in online

mode through MS Team platform. Institute scrutiny committee short-listed

12 projects for availing SSIP grants on basis of various parameters such as

innovation, research, social application of projects etc.

4) 01 project requiring funding more than Rs. 50,000/- is forwarded to institute

level scrutiny committee.

Total 12 proposals were sanctioned with amount of Rs. 1, 65,300/-

Online Capacity Building Program

07 Faculties were nominated for participating in online capacity building

program “Nurturing Innovation and Startup Ecosystem” (NISE) held by iHub

during 08/09/2020 to 24/10/2020. Fund of Rs. 14,000/- was utilized for the

same.

List of Facilities Available

List of Facility available: Gymkhana Building with canteen

Games and sports facility: Table tennis Room, Cricket ground , volleyball ground

Extra-curricular activities: Students are encouraged to participate in inter college Sports

and cultural events organized by GTU. Inter class tournaments are being held. No

events this year due to COVID

Enrollment of students in the last 3 years

A.Y. Link

2019-20 https://drive.google.com/file/d/16oAm5c2uAYYTACKZ4B8DfsTrE_5EaAdj/

view?usp=sharing

2018-19 https://drive.google.com/file/d/1PNt_be0ReJqO3HjdCXjA0EONA6-C2em-

/view?usp=sharing

2017-18 https://drive.google.com/file/d/1vNN_l8z8zANGkM8m2Ige7PXY7toKSwX4/

view?usp=sharing

EoA of last three years

Best Practices adopted, if any

Civil Department organizes various co-curricular activities and activities under 100

point activity.

Civil Department meeting at regular intervals for planning and execution of

department work.

Undertaking various consultancy work in civil engineering related work such as Road

and Bulding, Vrudavan Gram Yojna, Unnat Bharat Abhiyan, Vishwakarma Yojna etc

Focused approach for improving teaching and learning processes

Workshops /Webinars are arranged to keep student up-to-date with recent

development in electronics and communication related skills

In Covid-19 related situation complete teaching done Online

Students are encouraged to take part in various completions and SSIP activity

Students are encouraged to take part in various sports and cultural activity

mandatory disclosures for year 2020-21 name of the

Documents