manaksia coated metals and industries limited · 2016-04-19 · payment: all payments in form of...
TRANSCRIPT
MANAKSIA COATED METALS AND INDUSTRIES LIMITED
e-SALE CATALOGUE
FOR Rolling Mill from
Chandrani , Kutch , Gujarat
CONDUCTED BY
mjunction services limited
SALE OF USED Rolling Mill– Manaksia Coated Metals and Industries Limited/ Kutch, GUJARAT/May ,2016 Online Sealed Bid conducted by mjunction services ltd (This may be followed by a forward auction on the same day)
“Being sold on “AS IS WHERE IS & NO COMPLAINT BASIS” Table : 1
Mandate Number: VJ15215637
Seller: MANAKSIA COATED METALS AND INDUSTRIES LIMITED Online Event website: www.metaljunction.com Date & Time: 06/05/2016 at 12:00pm Inspection Date & Time: 19/04/2016 to 05/05/2016 with prior appointment with concerned person from mjunction
services limited. Inspection timings - 10.00 am to 4 pm on working days only (Lunch break from 1pm to 2pm).
Location of material: MANAKSIA COATED METALS AND INDUSTRIES LIMITED , Chandrani , Kutch, GUJARAT Contact Details:
mjunction services ltd:
For Details :
1. Mr.Subrata Bhattacharyya: 8584008277;
2. Mr.Gaurav Das : 8584008249;
Auction Room No’s: (033)66031760-72 (13 lines) (033)44091760-72 (13 lines)
MANAKSIA COATED METALS AND INDUSTRIES LIMITED
To visit & inspection Contact Person: 1. MR. OP MISHARA : +91 99-09-018156
LOT DETAILS:
Table : 2
Lot No
Material
Qty
UOM
EMD (INR)
Excise Duty with Cess
VAT
CST
TCS
MIL/1
ROLLING MILL
1
LOT
10,00,000
0 %
5 %
5 % without
Form “C”
N/A
MATERIAL DETAILS :
LOT : MIL /1
Sr. No.
Particular No. of. QTY Pcs. / Set. Specification
01 FURNACE 1 set. Lenghth-15.6 M,Width-2.9 (outer side) used as reheating the billet.
02 ROLLER STAND 7 set. 3 pinion stand , Centre to Centre Height 10 Inch,16.1 meter for getting the required out put size after each stand as per pass
design
03 ROLLER 49 Nos. (Appx.) Normally forged, used for exerting the force to get the output size
04 GEAR BOX 2 Nos.
05 MOTOR 2 Nos. (600 & 400 HP)
06 ELECTRICAL PANEL 1 set.
07 EQUIPMENT 1 set.
08 COOLING TOWER 1 Nos. (Size-2.5 Mx2.5 MX2.5 M) Motor- 2.2 kw,rpm-715,Duty-S1
09 PUMP 3 Nos 15 Hp
10 COOLING BED 1 Nos. 110 FT LONG
11 TMT CUTTING MACHINE 1 Nos.
12 MAIN SHED 1 Nos. Combined covered area of 20,000 sqft.
13 OTHER SHED 2 Nos.
14 SHEARING MACHINE 3 Nos. with 40 Hp Motor
15 COKE PULVERZER 1 set.
MILL DESCRIPTION
The mill has 3 separate cutter/shearing machines , to process scrap plates and convert it to usable raw material. The other form of raw material that can be used for conversion is steel Billets/ Ingots.
This TMT rebar rolling mill, complete with multiple stands having semiautomatic production capacity of about 5,000MT/ Month. The Mill is equipped and attached with re-heating furnace fired by coal/ oil. The furnace is accompanied by a coal pulverizer with dust collection system to process the coal fuel. The Mill is fitted and equipped with electrical motors, starters and auxiliary electrical equipment . Available water quenching along with cooling bed allows proper treatment and surface hardenning of the TMT bars. (LOCAL THERMAX MAKE)
The mill has a unique feature of motor drive from both ends with complete gearbox and pinion stand and additional mill stands, thus one can run two rolling mills simultaneously out of available equipments.
The Rolling mill comes along with complete manufacturing shed of approximately 20,000 sqft covered area, which can be easily dismantled and re- erected at the new location.
MILL TECHNICAL SPECIFICATIONS: ROLLING MILL IS 8 INCH MILL : PINION TO PINION CENTRE HEIGHT 10 INCH ( 3 PINION STAND) INPUT BILLET/ INGOT SIZE (CROSS SECTION) : 100 MM X100 MM ( MAXIMUM ) FINISH ROLLED REBAR SIZE : 6 MM TO 25 MM PRODUCTION CAPACITY: 8MM ROD 5,000 MT/MONTH ( APPROX. 165 MT/ DAY) WATER QUENCHING TANK COOLING BED SIZE : 110 FT LONG MODE: SEMI-AUTO/ MANUAL
YEAR OF INSTALLATION: 2005
MAKE OF MACHINES: Rajkot equipment manufacturer
Payment & Lifting Schedule:
Table: 3
LOT No. LOT VALUE LIFTING PERIOD
MIL/1 Payment has to be made in 2 equal installments within 10 and 20 days from the date of lot confirmation (Lot value + applicable tax & duties)
60 days from the receiving go ahead to commence lifting, after payment has been made
TERMS & CONDITIONS:
1. Materials are being offered on “as is where is” & “no complaint” basis. Bidders are advised to inspect the materials and satisfy themselves before bidding.
2. All lots are ‘site to be cleared basis’. 3. Prices quoted must be valid for this sale event only. VAT/CST & TCS will be applicable. 4. Form "C" is to be deposited in advance; otherwise 3% margin money has to be deposited alongwith material value
towards the security money for Form "C". On receipt of Form "C" from customer, MANAKSIA will refund the 3% security money.
5. Payments: Payment has to be made in 2 equal installments within 10 and 20 days from the date of lot confirmation
6. Price to be quoted ex- KUTCH, GUJARAT exclusive of taxes. 7. Cutting, dismantling, Transportation, loading & unloading is in the scope of the buyer.
1. Requirements of participation:
1.1 Registration: Before participation in the e-Tender, a prospective bidder shall be required to get registered with mjunction services limited. For details visit www.auction.metaljunction.com OR get in touch with the concerned person from mjunction.
1.2 Documentation: The following documents need to be submitted by the bidder interested for participating in the e-Sale to mjunction services limited prior to the date of the e-Sale:
Letter of Interest duly signed and stamped by bidder (attached with this catalogue). Each page of this catalogue to be signed and stamped by the buyer and to be submitted to Mjunction Services Limited.
New bidders (not registered with mjunction) are requested to submit notarized copies of their SOI's before participating in the e Sale.
1.3 Pre Bid Security Deposit: Security Deposit: Non-Interest bearing security deposits (Given in Table: 2) through Online Payment only: Details as under:
Beneficiary Name MJUNCTION SERVICES LIMITED
Bank Name HDFC BANK LTD
Branch Name Sandoz Branch, Mumbai
Account No Explained below *
IFSC Code HDFC0000240
Account No: *All the customers will have a unique account number. The unique account number is an alpha
numeric code consisting of 13 characters. The Customer’s unique “account number” is a combination of the MJ’ SAP code along with the 7 digit bidder SAP ID and can be used as reference for all subsequent transactions. The Customer’s Account Number detail is available in “Profile” after the customer logs into our website using the user id and password
1.4 Last Date for submission of Pre Bid Security Deposit: 05/05/2016 by 4 pm
2. Bidding modalities:
2.1 Price Bid Basis for Online sealed bid/Forward auction: In Rs/Lot. & Rs/MT ( as per Table : 2 ) Price to be quoted is basic, ex- location exclusive of VAT/CST & TCS.
2.2 Type of auction: (Online sealed bid from 12:30pm-1:30pm, followed by a forward auction)
2.3 Bid Validity: Bid shall be valid for TEN (10) days from the date of e-Tender.
Note:
a) L1 will be eliminated from the Online Sealed Bid. Rest of the customers will be allowed to participate in the forward auction. b) If the forward auction is not conducted after the online sealed bid, the H1 price of online sealed bid will be processed for approval. c) If the forward auction is conducted after online sealed bid and if there are no bids in the forward auction the H1 bid of the Online Sealed Bid will be processed for approval. d) Final decision will be taken by MANAKSIA COATED METALS AND INDUSTRIES LIMITED to accept or reject the H1 bid. Mjunction will confirm acceptance to the H1 bid customer only on receipt of clearance/confirmation from MANAKSIA COATED METALS AND INDUSTRIES LIMITED in writing.
3. Payment terms & conditions :
Payment: All payments in form of RTGS are to be deposited directly to MANAKSIA COATED METALS AND INDUSTRIES LIMITED. H1 Buyer will deposit the lot value along with the taxes and duties in the bank details given below.
BANK DETAILS :
Company Name MANAKSIA COATED METALS & INDUSTRIES LTD
Name of Bank HDFC Bank
Account Type Current Account
Bank A/c No 0 0 1 4 0 1 1 0 0 0 0 3 7 4
Name of Branch Kolkata
Bank Address Central Plaza Branch- Kolkata- 700 020
RTGS / IFSC Code H D F C 0 0 0 0 0 1 4
CMS client code MNKASIALTD
4. Lifting Terms:
5.1 Lifting time: 20 days from the date of full & final payment.
Note: Lifting will only be permitted after full & final payment including taxes has been submitted by the winning customer. MANAKSIA has obtained the TIN, so they are authorized to collect VAT & generate the way bill to the buyer.
5. Penalties:
The following penalties shall be applicable in the eventuality of a buyer defaulting in adhering to any of the payment or lifting norms.
5.1 The pre bid security deposit shall be recovered from the winning customer in case of failure in making the payment within stipulated time after lot confirmation.
6. Refund
a) For the winning customer, if price is approved the pre bid security will be retained till lifting of all material is completed & successful completion of the contract. b) For non H1 buyers, the pre-bid security will be refunded within 4 working days of receiving the refund request letter on company letter head along with cancelled cheque copy with company seal from the customer.
Letter of interest to be filled and submitted on company letter head by mail to [email protected] , [email protected] and [email protected]
LETTER OF INTEREST
To
The Manager,
mjunction services limited
Dear Sir,
REF. : Online Sale of used assets and spares items Dt. 06/05/2016
(1) We are interested in participating in the Online sale event notified vide your notice under reference for the used assets and spares at Kutch , Gujarat and lifting of material to be done ex Gujarat by road. We also agree to abide by all the instructions
contained in the indicated Online sale event Catalog above, General Rules and Regulations governed in Conduct of Online Sealed
bid followed by forward auction, invitation to online sale event auction notice.
(2) We are hereby submitting the applicable Pre-bid security deposit of Rs. for LOT as per
following details in favor of “mjunction services limited” for participating in the above mentioned Online Sale event.
LOT NUMBER UTR No. RTGS date Bank, Branch Amount (Rs.)
(3) We agree to offer our best bid in the online event, in Rupees per Lot for the lot in the auction process, Ex- KUTCH, GUJARAT exclusive of all taxes & duties, and other Statutory Levies if any, as legally applicable at the time of delivery/dispatch and hold
the same valid for 10 days for acceptance of the bid from the date of online sale event.
(4) We agree to comply with all "SAFETY MEASURES" of MANAKSIA COATED METALS AND INDUSTRIES LIMITED. during the
activity of lifting.
(5) We are providing the following details of ourselves in connection with the above Online Sale event.
Name of the Company: Name of the contact person
Address of the Company: Telephone No:
Mobile No. FAX No. :
e-mail Particulars:
Yours faithfully
Name and Signature of authorized Person.
For M/S
( With Company’s Seal )
Place ,
Date
Following particulars to be furnished along with LETTER OF INTEREST on the company’s letter
head.
1) NAME OF THE COMPANY :
2) ADDRESS :
3) CONTACT PHONE & FAX NO. :
4) E-MAIL ID :
5) NAME OF CONTACT PERSON :
6) CONSIGNEE ADDRESS :
7) NAME OF BANK :
8) NAME OF BR. WITH ADDRESS :
9) BANK A/C. NO. :
10) BANK IFSC CODE :
11) VAT NO. :
12) CST NO. :
13) PAN NO :
14) ECC No. :
15) EXCISE RANGE :
16) EXCISE DIVN :
17) EXCISE COMM. :
Authorized Signatory
(With Name and Seal)
PHOTOGRAPHS :
………………………………………
…………………
……Image:-1 [FURNACE]……
= Image:-2 [MILL ROLLER
STAND] =
.....Image:-2 [MILL ROLLER STAND]……
= Image:-4 [ELECTRICAL
=Image:-2-B ( Gear Box ) =IMAGE NO;-2 C. (
ROLLER )=
= Image:-4 [ELECTRICAL =Image:-2-B ( Gear Box ) =IMAGE NO;-2 C. ( ROLLER )
=IMAGE NO:-3 [
MOTOR]=
= Image:-4 [ELECTRICAL
=IMAGE NO:-3 [
MOTOR]
Image:-5 ( Equipment )
…… Image:-6 [COOLING
TOWER]……..
Image:-6A & 6B [PUMP]
Image:-6A & 6B [PUMP]
Image:-8 ( TMT CUTTING MACHINE )
Image:-9-A (MAIN
Image:-9-B (COOLING BED SHED ) Image:-9-BC (PULVERIZER SHED )
Image:-10-B & 10-C ( SHEARING MACHINE )
20
Image:-10-B & 10-C ( SHEARING MACHINE )
21
Image:-11 (COKE PULVERIZER)
TRAINING MANUAL FOR DYNAMIC RANK BASED FORWARD AUCTION
Please login at www.metaljunction.com for participation in the auction.
Please insert your username and password and select client from the dropdown list and click on “LOGIN” for
proceeding to bidding page. In case if there is any problem with your Username/ Password, please send a reset
request from your MJ registered mail Id to [email protected], [email protected].
Start price and Lead price will not be visible to any party. You need to quote your best price and downward
revision in price is not allowed but you can increase your price (Refer Screenshot 1)
Screenshot 1 :-
22
…..
Once you have placed a bid in a lot, you can see your “RANK” at the right hand extreme column in the bidding
page. (Refer Screenshot 2). You can improve your rank by further bidding.
Buyer with Rank 1 at the time of closure of auction will be declared as winner of the lot.
In case of tie bid, buyer whose bid is received first will be considered as the leading bidder.
Screenshot 2 :-
23
You need to quote your price in My Bid column in multiples of Rs. 50/-.
Auto extension will run if bidding continues beyond initial duration time.
For your practice, before auction you may use following link and user id & password.
1. http://demoauction1.metaljunction.com:9080/MetalWeb/getSignIn.do
2. For any assistance , please contact our customer contact officers.
Sr No User Id Password
1 testbidder4 Pass@123
2 testbidder11 Pass@123
3 testbidder13 Pass@123
24