2008

Satisfying the professional’s needs

NEMESIS DRILL BITS

made for the best

One piece integrated solid carbidetip ensures optimum drilling.

1www.

makit

auk.c

om

Cus

tome

r car

e019

08 21

1678

The Head: A one piece, solid carbide, 4–cutter headoffers the perfect solution to the toughest drillingconditions. The 90º symmetry ensures even drilling andgreatly reduces the possibility of seizing on contact withreinforcing steel. The carbide tip is embedded directlyinto the drill core and fused to ensure maximum bondingbetween the surfaces. This results in a very strong bond

and a high resistance to torsional forces. The special headgeometry with a centring tip is perfect for accurate drillinggiving a round holes perfect for critical fixings. Sizes from5mm to 14mm Nemesis drills are perfectly matched withthe latest generations of hammer drills including Makita’sAVT anti vibration technology.

The one-piece, solid carbide tip andpatented reinforcing chamfering ensurelow vibrations and optimum drillingperformance when drilling intoreinforced concrete.

Thanks to the optimum4 x 90° symmetry, allfour carbide cuttingedges function evenlyand do not seize up onhitting reinforcing steel.

Lateral support and themaximum possible area of theinterface between the carbideand steel body provide the mostsecure bond to compensatefor torsional forces.

Centring tipfacilitates spotdrilling withpinpoint accuracy.

RESOLVES PROBLEMSDrilling into reinforced concrete is no longer a hit and miss application,reinforcing bar being no obstacle for the Nemesis drill. Also perfect foruse in the hardest of natural stone.

DRILLS MORE PRECISELYIts unique symmetrical head geometry ensures precision drill holes.Perfect for critical anchor fixings and where spot drilling is required.

LASTS LONGERThe Nemesis will drill up to 50% more holes than normal rotary hammer drill bits.

2

The Flute: The symmetrical four-fluted spiral ensuresdrilling loads are evenly distributed down the length of thedrill shaft. As a result, drilling combines low vibration withhigh efficiency which remains constant throughout thelifetime of the drill. High grade steel and special surface

treatment ensure the Nemesis drill is resistant to bendingfractures, especially important with drills over 300mmoverall length. With rapid debris clearing from the drillingsurface, the Nemesis provides efficient drilling with lowwear properties.

The PGM seal guaranteesprecisely fitting anchor holesover the entire life time of thedrill bit.

Four symmetricallyfunctioning spiralridges ensure low,uniform flute wear.

Optimised flute core strengthensures low vibration drillingperformance and exceptionalfracture resistance.

The high-volume flute geometryensures the optimum removal ofdrilling dust.

NEMESIS DRILL BITS SDS+

PART NUMBER Ø D mm L1 mm PRICEL2 mm

B-11623 5 110 50 £4.10B-11639 5 160 100 £4.40B-11645 5.5 110 50 £4.10B-11651 5.5 160 100 £4.40B-11667 6 110 50 £4.20B-11673 6 160 100 £4.40B-11689 6 210 150 £5.60B-11695 6 260 200 £6.90B-11704 6 310 250 £9.40B-11710 6.5 160 100 £5.80B-11726 6.5 210 150 £7.60B-11732 6.5 260 200 £9.50B-11748 6.5 310 250 £11.00B-11754 7 110 50 £5.50B-11760 7 160 100 £5.80B-11776 8 110 50 £4.80B-11782 8 160 100 £5.00B-11798 8 210 150 £5.60B-11807 8 260 200 £6.80B-11813 10 110 50 £5.20B-11829 10 160 100 £5.50B-11835 10 210 150 £6.20B-11841 10 260 200 £7.20B-11857 10 310 250 £8.80B-11863 10 450 400 £15.20B-11879 12 160 100 £6.00B-11885 12 210 150 £7.40B-11891 12 260 200 £8.20

><

>L2<

>L1<

D

PART NUMBER Ø D mm L1 mm PRICEL2 mm

B-11900 12 310 250 £11.20B-11916 12 450 400 £16.40B-11922 14 160 100 £8.40B-11938 14 210 150 £11.00B-11944 14 310 250 £13.50B-11950 14 450 400 £17.00

PART NUMBER DETAILS Ø D mmL1 = 110mm PRICEØ D mm

L1 = 160mm

B-12354 5pc set 5, 6, 8 £14.00B-12332 5pc set 6, 8, 10 £15.00B-11994 5pc set 5, 6 6, 8, 10 £23.00B-12304 7pc set 5.5, 6 5.5, 6.5, 7, 8,10 £36.00B-12027 7pc set 5, 6, 8 6, 8, 10, 12 £38.00

Performance SDS MAXRemains a cost effective choice when fast drilling is required and hole roundness and accuracy arenot paramount.

Satisfying the professional’s needs

Makita UKMichigan Drive, Tongwell, Milton Keynes, Buckinghamshire MK15 8JDT: 01908 211678 F: 01908 211400

www.makitauk.com

98N317 0908

CONCRETE DRILLINGGood drill bits are one of the most important parts of any tool box. The wrong bit can mean apoor finish, a damaged tool and could be potentially be dangerous. Makita offers a fullselection of drill bits ensuring the right tool for the job is available, from High Speed Steel at aprecise 1.5mm to massive 50mm Tungsten Tipped bits for reinforced concrete. They areavailable with Straight Shank; ¼ hex; SDS+ and SDS Max shank. Many bits are optimised toreduce vibration and this range is expanding all the time.

Makita produce high quality accessories which when used in combination with anyprofessional power tool make an efficient and reliable solution for any job.

MAK4 SDS MAXPremium SDS Max drill with a dynamic 4-cutter head. Symmetrical head-geometry with centring-tip foroptimised results in the event of reinforcement collision. Shortened spiral windings and conical shapeddust tracks for extra fast material removal into the high-volume double flute. The MAK4 significantlyraises the performance parameters of drilling speed and life expectancy. This considerably reduces theuser cost per hole.

Standard SDS PLUSA range of 2 cutter drills available from 4mm to 30mm. Suitable for the serious home renovatorand ocasional jobs for the proffessional tradesman. A cost effective choice when rapid drillingis required.

Performance SDS PLUSThis bit specialises in heat-resistance and is perfect for drilling in high-resistance materials suchas Green Concrete or Engineering Brick. Suitable quality for regular proffessional use, these drillsgive excellent economic value, with good drilling speed and improved life expectancy.

Nemesis SDS PLUSThe Nemesis SDS+ drill bits are engineered for lower vibration than standard hammerdrills, reducing the risks of exposure to vibration and increasing trigger time. The specialydesigned solid carbide tip makes the Nemesis drill suitable for the toughest applications.

Core cutter SDS MAX/PLUSA multi-piece tool system to fit all makes of rotary hammer drills.Adaptors are available for SDS PLUS and SDS MAX with sizesfrom 40mm to 125mm.

Concrete core cutter SDS MAXA one piece core cutter specialy developed for the latest generation of powerful rotary hammers, ensuringefficient drilling and superior life. Fast drilling in diameters upto 80mm with out the need to use adaptors orcentering drills. Working lengths upto 900mm.