making a pinhole camera from a pringle tube
TRANSCRIPT
![Page 1: Making a pinhole camera from a pringle tube](https://reader035.vdocuments.mx/reader035/viewer/2022062307/55853ef9d8b42a58788b4aea/html5/thumbnails/1.jpg)
Making A Pinhole Camera from a Pringle tube!
![Page 2: Making a pinhole camera from a pringle tube](https://reader035.vdocuments.mx/reader035/viewer/2022062307/55853ef9d8b42a58788b4aea/html5/thumbnails/2.jpg)
WE USED....WE USED....
• Half Pringles tube• Black Sugar paper• Tracking paper• Foil• Elastic band • Scissors• Masking Tape
![Page 3: Making a pinhole camera from a pringle tube](https://reader035.vdocuments.mx/reader035/viewer/2022062307/55853ef9d8b42a58788b4aea/html5/thumbnails/3.jpg)
11stst Step Step
First we had to cut the Pringles tube into two halves because we only needed one half which was the bottom half.
![Page 4: Making a pinhole camera from a pringle tube](https://reader035.vdocuments.mx/reader035/viewer/2022062307/55853ef9d8b42a58788b4aea/html5/thumbnails/4.jpg)
22ndnd Step Step
Then we drew a circle on the sugar paper and cut the circle out in order to place it in the Pringles tube and used blue tac.
![Page 5: Making a pinhole camera from a pringle tube](https://reader035.vdocuments.mx/reader035/viewer/2022062307/55853ef9d8b42a58788b4aea/html5/thumbnails/5.jpg)
Next we mad a hole in the Pringles tube at the tin bit using a compass in order to see the hole if not how else can we see it.
The hole in the Pringles tube.
33rdrd Step Step
![Page 6: Making a pinhole camera from a pringle tube](https://reader035.vdocuments.mx/reader035/viewer/2022062307/55853ef9d8b42a58788b4aea/html5/thumbnails/6.jpg)
44thth Step Step
Next we covered the inside of the tube by covering the inside of the tube with black sugar paper all around inside.
![Page 7: Making a pinhole camera from a pringle tube](https://reader035.vdocuments.mx/reader035/viewer/2022062307/55853ef9d8b42a58788b4aea/html5/thumbnails/7.jpg)
55thth Step Step
After covering, we then closed the open end with tracing paper and secured it tightly with a elastic band.
![Page 8: Making a pinhole camera from a pringle tube](https://reader035.vdocuments.mx/reader035/viewer/2022062307/55853ef9d8b42a58788b4aea/html5/thumbnails/8.jpg)
66thth Step Step
Finally we wrapped the Pringles tube with foil so there is a good look and it would cover the masking tape as well as the Pringles cover.
![Page 9: Making a pinhole camera from a pringle tube](https://reader035.vdocuments.mx/reader035/viewer/2022062307/55853ef9d8b42a58788b4aea/html5/thumbnails/9.jpg)
That’s how we got our pin hole camera!
Which Worked Fine!