maker presentation 2012 galvanizing spares... · 2020. 4. 21. · hot dip galvanizing line (both...
TRANSCRIPT
2012
Maker Metallurgy Technology Co., Ltdwww.cnmaker.com
Directory
MAKER METALLURGY www.cnmaker.com
www.sinkroll.com
CGL/CGA integrated supplier
Sink roll · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Stabilizing roll · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Arms· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Bush and sleeves · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Snout · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Arm tension rod · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Center protection cap
Drosser
Stopper and slider
Furnace roll · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Water cooled hearth roll ·· · · · · · · · · · · · · · · · · · · · · · · ·
Hot bridle roll/Deflector roll · · · · · · · · · · · · · · · · · · · · · · ·
Radiant tube· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Page 1
Page 2
Page 3
Page 4
Page 4
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Maker Catalogue Directory
Company Profile · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Pot equipments· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Annealing furnace equipments · · · · · · · · · · · · · · · · · · · ·
Air knife· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Contact information· · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Maker Profile
MAKER METALLURGY 1www.cnmaker.com
MAKER
With 10 years production experience of
heat-resistant and wear-resistant alloy
product. Was invested by HMT in China.
Focus on becoming a professional supplier
of metallurgical accessories.
Application:Hot dip galvanizing line (both wet flex and gas
reduction type)
• Strip Continuous galvanizing line
• Strip Continuous galvafan line
• Strip Continuous galvalume line
• Strip Continuous Color coating line
• Strip Continuous annealing line
CGL/CGA integrated supplier
www.sinkroll.com
Company Profile
Company name Maker Metallurgy Technology Co., Ltd
Date of establishment 2003 (Since 1976)
Enterprise type Private
Total registered capital Approx. USD 760,000
Total area / workshop area 40000 m2 / 25000 m2
Number of employees 200
Engineer & Technicians 30
Capability OD45mm – OD1600mm (Centrifugal casting tube)
Process Centrifugal casting, Lost wax casting, Sand casting and etc.
Inspection Direct reading spectrometer, PT test, Balance test, Ultrasonic test
Total sales 2011 Approx. USD 30million
Local / Export (%) 90 / 10
AddressRoom 410,Building 44, No.258, Xinzhuan Road. ShangHai, China
Factory: Dongxin Industrial Park, Jingjiang city, Jiangsu, China
Contact person Mike Wang (Manager)
Mobile +8613482876468
Telephone +86 21 67684218
E-mail [email protected] / [email protected]
Website www.cnmaker.com / www.sinkroll.com
Pot equipments
Sink roll
Stabilizing roll
Arms
Bush and sleeves
Snout
Arm tension rod
Center protection cap
Drosser
Stopper and slider
…
MAKER METALLURGY 2www.cnmaker.com
Zinc pot is one of the key sector of the GI
and GA line. The spare parts determine the
quality of the product and production costs.
MAKER can provide all the spare parts
related with the zinc pot.
CGL/CGA integrated supplier
www.sinkroll.com
MAKER METALLURGY 3www.cnmaker.com
Sink roll
• Part Name
Sink roll
• Material
SS316L ferrite free
CF-3M
…
• Production Process
Centrifugal casting
Solid solution treatment
• Inspection
Melting material inspection
PT inspection
Balance test
• Comments
Surface could be smooth, groove,
---hole, drum and etc.
Pot equipments
CGL/CGA integrated supplier
www.sinkroll.com
MAKER METALLURGY 4www.cnmaker.com
Stabilizing roll
• Part Name
Stabilizing roll
• Material
SS316L ferrite free
CF-3M
…
• Production Process
Centrifugal casting
Forging
Solid solution treatment
• Inspection
Melting material inspection
PT inspection
Balance test
Pot equipments
CGL/CGA integrated supplier
www.sinkroll.com
MAKER METALLURGY 5www.cnmaker.com
• Part Name
Sink roll arm
Stabilizing roll arm
• Material
SS316L ferrite free
CF-3M
…
• Production Process
Sand casting
• Inspection
Melting material inspection
PT inspection
Arms
Pot equipments
CGL/CGA integrated supplier
www.sinkroll.com
MAKER METALLURGY 6www.cnmaker.com
• Part Name
Sink roll bush & sleeve
Stabilizing roll bush & sleeve
• Material
Maker-1(Private formula)
Maker-2(Private formula)
Canalloy
Stellite 6
…
• Production Process
Centrifugal casting
(Much better than sand casting or lost wax casting)
• Inspection
Melting material inspection
Bush & Sleeve
Pot equipments
CGL/CGA integrated supplier
www.sinkroll.com
MAKER METALLURGY 7www.cnmaker.com
• Part Name
Snout
• Material
SS316L
CF-3M
Carbon steel for flange
…
• Production Process
Sand casting
• Inspection
Melting material inspection
Snout
Pot equipments
CGL/CGA integrated supplier
www.sinkroll.com
MAKER METALLURGY 8www.cnmaker.com
• Arm tension rod
• Drosser
• Center protection cap
• Stopper and slider
• Arms assembly
• Zinc pump
• …
Others
Pot equipments
CGL/CGA integrated supplier
www.sinkroll.com
Annealing furnace
MAKER METALLURGY 9www.cnmaker.com
We can provide below products,
Furnace roll
Water cooled hearth roll
Hot bridle roll / Deflector roll
Gas radiant tube
Electric radiant tube
Electric radiant tube ceramic heater
Gas Burner
Heating elements
…
Annealing furnace is one of the key
sector of GI/GA line.
Annealing furnace was also widely used
in other steel continuous annealing line.
CGL/CGA integrated supplier
MAKER METALLURGY 10www.cnmaker.com
• Part Name
Furnace roll
• Material
1Cr18Ni9Ti
3Cr24Ni7NSiRe
Cr25Ni20
Cr25Ni35 (Nb)
Cr28Ni48
Cr28Ni48W5
MORE series
HK HH series
SCH series
…
• Production Process
Centrifugal casting
• Inspection
Melting material inspection
PT inspection
Balance test
Furnace roll
Annealing furnace
CGL/CGA integrated supplier
www.sinkroll.com
MAKER METALLURGY 11www.cnmaker.com
• Part Name
Water cooled hearth roll
• Material
Cr28Ni48W5
Cr25Ni12
SS304
…
• Production Process
Centrifugal casting
• Inspection
Melting material inspection
PT inspection
Balance test
Water cooled roll
Annealing furnace
CGL/CGA integrated supplier
www.sinkroll.com
MAKER METALLURGY 12www.cnmaker.com
• Part Name
Hot bridle roll
Deflector roll
• Material
3Cr24Ni7NSiRe
SS316L
CF-3M
…
• Production Process
Centrifugal casting
• Inspection
Melting material inspection
PT inspection
Balance test
Hot bridle/Deflector roll
Annealing furnace
CGL/CGA integrated supplier
www.sinkroll.com
MAKER METALLURGY 13www.cnmaker.com
• Part Name
Furnace roll
• Material
Cr25Ni20Cr25
Cr25Ni35 (Nb)
Cr28Ni48
Cr28Ni48W5
…
• Shape type
U, W, Straight Pipe…
• Heat type
Gas burn
Electric
• Production Process
Centrifugal casting
• Inspection
Melting material inspection
PT inspection
Hydraulic pressure test
Radiant tube
Annealing furnace
CGL/CGA integrated supplier
www.sinkroll.com
Air knife
MAKER METALLURGY 14www.cnmaker.com
We can provide below products,
Full set air knife
Air knife assembly
Air knife nozzle assembly
Side baffle
Lips
Lifting device
Mobile device
…
Maker mainly provide 3 types air knife
with different structures.
The minimum coated weight could reach
40g/sqm (Double surface).
Maker-AK01 type:
Basic structure, absorb and combine the
technology from Kohler air knife.
Maker-AK02 type:
Advance structure, absorb and combine
the technology from FOEN and DUMA air
knife. Multi-joint air injection.
Maker-AK03 type:
Advance structure, Private design.
Double-joint air injection.
CGL/CGA integrated supplier
CGL/CGA integrated supplier
Contact
MAKER METALLURGY 15www.cnmaker.com
www.sinkroll.com
Contact: Mike Wang (Manager)
Tel: +862167684218
Mob: +8613482876468
Skype: juntrade
Address: Room 2303-2, (Twin Towers A) No.668, Xinzhuan Road.
(Caohejing Hi-Tech Park) ShangHai, China
Website: www.cnmaker.com www.sinkroll.com
Email: [email protected] [email protected]
MAKER METALLURGY TECHNOLOGY CO., LTD
MAKER
Address: Dongxing TownIndustrial Park, Jiangsu Province, China.
Website: www.cnmaker.com www.sinkroll.com
Email: [email protected] [email protected]
Factory Location
GUJARAT NIPPON INTERNATIONAL PVT LTD.
Tel : +91 22 40997010/40997000.
Mob : +91 9619866005
Address: 21, Navyug Industrial Estate, Behind Kotak Mahindra Bank,
J.B.Nagar, Andheri-Kurla Road,Andheri [E]. Mumbai-59.
Email : [email protected]
Overseas Partner