Make the most of your energy

Needing a total network solution?

PowerLogic Ethernet Communications Card (ECC21)

Schneider Electric 2- Marketing – ECC21 – December 2008

About the ECC21

●The PowerLogic ECC21 Ethernet communication card expands the capability of the CM4000 and CM3000 circuit monitors as a total network solution for your power monitoring needs. 

Schneider Electric 3- Marketing – ECC21 – December 2008

Ethernet communication card - ECC21

●3 Main functions● Provides a fast access to Ethernet networks to the CM3000

●Share information through intranet

● Provides an Ethernet gateway to products daisy chained to the ECC

●Provides access to Power Meters, CM2000, Micrologic, Sepam, and other Modbus devices

● Provides an embedded HTML page server

●Share information with a standard Web navigator

●Same Ethernet card as used in CM4000

Schneider Electric 4- Marketing – ECC21 – December 2008

ECC 21 Advantages

●Providing basic web-enabled displays, the ECC21:● Furthers the migration of PowerLogic systems to open networks

● Provides direct, high speed Ethernet connectivity.

●The ECC21 also allows for: ● Easy device setup

● Real-time power system information from the circuit monitors through a standard web browser using embedded HTML pages.

● Information can also be viewed for devices daisy-chained to the ECC21 onboard RS-485 port. 

Schneider Electric 5- Marketing – ECC21 – December 2008

ECC21 Features

●Based on plug and play technology, the ECC21, with MODBUS/TCP protocol support, plugs into an expansion slot on the circuit monitor.

● This provides a direct connection to the Ethernet network using either UTP or fiber cabling. 

●An RS-485 Modbus® master port on the ECC supports a daisy chain of up to 31 additional devices without a repeater.

● This allows the circuit monitors with ECC to act as an Ethernet gateway for downstream devices.

Schneider Electric 6- Marketing – ECC21 – December 2008

For more information

●Please visit ● www.powerlogic.com