maintenance training module 2 - tuthill pumptuthill confidential. • for all pumps, tightening of...
TRANSCRIPT
![Page 1: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/1.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
Maintenance Training Module 2 GlobalGear® with Cartridge Mechanical Seals
![Page 2: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/2.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
Topics in Maintenance Module 2 • Reassembly of Drive Module • Reinstall Drive Module • Adjusting End Clearance • Mechanical Seal Installation • Relief Valve Disassembly & Relief Valve
Troubleshooting • Servicing High Temperature Greased Bearing Units • Replacing Bushings • Lubrication Notes
![Page 3: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/3.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Reinstall the rotor into the bracket
Reassembly of the Drive Module
![Page 4: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/4.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Pick up external ball bearing
Reassembly of the Drive Module
![Page 5: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/5.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Reinstall bearing into bearing carrier
Reassembly of the Drive Module
![Page 6: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/6.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Reinstall inner bearing cap using fasteners
Reassembly of the Drive Module
![Page 7: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/7.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Move cartridge mechanical seal into position
• Have flush ports in correct orientation
• Very loosely tighten gland nuts
Reassembly of the Drive Module
![Page 8: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/8.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Reinstall bearing carrier
Reassembly of the Drive Module
![Page 9: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/9.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Push rotor all the way in the bracket
Reassembly of the Drive Module
![Page 10: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/10.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Insert lock washer with tabs
• If there is a bearing spacer, bearing spacer goes on first
Reassembly of the Drive Module
![Page 11: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/11.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Install locknut
Reassembly of the Drive Module
![Page 12: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/12.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
Reassembly of the Drive Module Locknut Torque Requirements
Nut Size Pump Size Newton-Meters
N-05 GG15-30 68 - 95
N-07 GG120-210 136 – 176
N-08 GG250 163 – 203
KM-12 GG550 163- 203
![Page 13: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/13.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Bend over tab of lock washer into slot on locknut
Reassembly of the Drive Module
![Page 14: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/14.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Check and make sure that the gasket is in the correct position for flush
• Center of three holes at flush opening is correct
Reinstall Drive Module
![Page 15: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/15.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Gasket must align to allow flow through internal flush drilling size GG250 & smaller
• NPT plug indicates internal flush path at this location
Reinstall Drive Module
![Page 16: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/16.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
Reinstall Drive Module Position Drive Module Over Foot and Near Housing
![Page 17: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/17.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
Reinstall Drive Module Push Drive Module into Housing
![Page 18: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/18.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
Reinstall Drive Module Fasten Bolts Connecting Bracket to Housing
![Page 19: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/19.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
Reinstall Drive Module Fasten Bolts Connecting Bearing Carrier to Foot
![Page 20: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/20.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• End clearance is distance between the rotor/idler end and the closest surface on the cover
Adjusting End Clearance
![Page 21: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/21.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Loosen set screws on rear cover
• Slowly and gradually tighten hex nuts on rear cover until rotor touches the pump cover
Adjusting End Clearance
![Page 22: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/22.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• When rotor is touching cover, there will be a slight drag when turning the shaft
Key in place
Adjusting End Clearance
![Page 23: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/23.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Measure the gap between the end the end cover and the bearing carrier at four places 90° apart
• Make small adjustments to set screws and/or hex nuts so that the gap is the same at all four measured points
Adjusting End Clearance
![Page 24: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/24.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Record the gap measurement with the rotor touching the cover
• This is zero end clearance
Adjusting End Clearance
![Page 25: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/25.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Refer to TPC 254 for Tuthill recommended end clearance
• Add the value from TPC 254 to the gap measurement for zero clearance
• This will be the target gap measurement for end clearance setting
Adjusting End Clearance
![Page 26: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/26.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Loosen hex bolts, several complete turns
• Tighten set screws on rear cover, enough to achieve the target gap measurement
Adjusting End Clearance
![Page 27: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/27.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Make adjustments to set screws & hex nuts so that the measured gap is the same 4 points 90° apart
• Do final even tightening of the set screws/hex nuts & measure again to confirm the same measurements of the gap at 4 points 90° apart
Adjusting End Clearance
Gap is the Same
![Page 28: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/28.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Final tightening of hex bolts to secure the rear cover in place
Adjusting End Clearance
![Page 29: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/29.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• If adjustment is being done in the shop, clearances can be measured directly from the open flanges
Adjusting End Clearance
![Page 30: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/30.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• After final tightening for end clearance, rotate the shaft by hand to confirm that the shaft rotates freely
Adjusting End Clearance
![Page 31: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/31.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• With cover removed, check clearance between rotor outer diameter and housing inner diameter at 4 points, 90° apart
Adjusting Radial Clearance
![Page 32: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/32.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Hex nuts can be adjusted to change radial rotor position
• Set screws may also need adjustment
Adjusting Radial Clearance
![Page 33: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/33.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
Final Tightening of Fasteners Recommend Using a Torque Wrench
Fastener Size Newton-meters
M6 8 – 12
M8 19 – 28
M10 41 – 54
M12 75 – 88
![Page 34: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/34.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• For all pumps, tightening of the mechanical seal is the last step for reassembling pump
• Gland nuts should only be barely started tightened, and seal cartridge left loosely in place until the final seal tightening
Final Tightening of Mechanical Seals
![Page 35: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/35.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Mechanical seal has a limited travel range for self alignment, and it is best to reserve the travel range for end clearance adjustments done in the field
Final Tightening of Mechanical Seals
![Page 36: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/36.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Have flush ports in the correct position for piping
• Install the mechanical seal flush and square to the stuffing box
• Support the seal weight to center the seal cartridge on the shaft
Final Tightening of Mechanical Seals
![Page 37: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/37.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Tighten gland nuts in an even alternating pattern
Final Tightening of Mechanical Seals
![Page 38: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/38.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Tighten mechanical seal set screws in an even alternating pattern
Final Tightening of Mechanical Seals
![Page 39: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/39.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Remove fasteners securing the relief valve
Removal of the Relief Valve
![Page 40: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/40.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Relief valve and gasket removed
Removal of the Relief Valve
![Page 41: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/41.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
Disassembly of the Relief Valve
![Page 42: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/42.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Use large wrench to remove cap
Disassembly of the Relief Valve
![Page 43: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/43.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Relief valve cap removed
Disassembly of the Relief Valve
![Page 44: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/44.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Loosen jam nut using large wrench
• Remove bonnet using large wrench
Disassembly of the Relief Valve
![Page 45: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/45.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Bonnet removed
Disassembly of the Relief Valve
![Page 46: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/46.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Spring guide removed
Disassembly of the Relief Valve
![Page 47: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/47.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Remove spring
Disassembly of the Relief Valve
![Page 48: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/48.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Orange paint on spring indicates high pressure spring, range 10-17 bar for full bypass
• No orange bands indicates standard pressure range 3-10 bar for full bypass
Disassembly of the Relief Valve
![Page 49: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/49.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Remove poppet
Disassembly of the Relief Valve
![Page 50: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/50.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
Potential Problems with Relief Valves
![Page 51: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/51.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Poppet sealing edge and/or poppet seat not clean
• Result will be bypassing
• Corrective action is to clean the poppet and seat
Potential Problems with Relief Valves
![Page 52: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/52.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Relief valve chattering • Relief valve bypassing
flow • Cause is relief valve set
too low
Potential Problems with Relief Valves
![Page 53: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/53.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Correction is to increase the setting for full bypass pressure
• Higher pressure spring may be required
Potential Problems with Relief Valves
![Page 54: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/54.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Remove cap • Start pump • Slowly close discharge
valve completely • Read pressure gauge
on pump discharge • This is current full
bypass pressure setting
Setting Relief Valve in the Field
![Page 55: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/55.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Must know highest normal differential pressure
• Set relief valve to 50% higher than highest normal differential pressure
Setting Relief Valve in the Field
![Page 56: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/56.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
1. Loosen jam nut 2. Use adjusting nut to
set pressure on gauge to target setting
Setting Relief Valve in the Field
2. 1.
![Page 57: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/57.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
3. Once desired pressure setting is achieved, tighten jam nut
4. Replace cap
5. Open discharge valve
Setting Relief Valve in the Field
4. 3.
![Page 58: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/58.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Setting Relief Valve in the field should be accomplished in ten minutes or less
• Do not run the pump in full bypass for extended periods to avoid overheating
Setting Relief Valve in the Field
![Page 59: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/59.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
1. Hold relief valve inverted as shown
2. Drop in poppet, feet
down
Reassemble Relief Valve
![Page 60: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/60.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
3. Drop in spring 4. Drop in spring guide
Setting Relief Valve in the Field
4. 3.
![Page 61: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/61.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Holding relief valve inverted
Reassemble Relief Valve
![Page 62: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/62.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Reinstall bonnet using Teflon pipe dope on threads
• Reinstall cap using pipe dope on threads
Reassemble Relief Valve
![Page 63: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/63.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Remove bearing cover fasteners
Removing High Temp. Greased Bearings
![Page 64: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/64.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Greased bearings have a special bearing cover
• Greased bearings have a grease fitting
Removing High Temp. Greased Bearings
![Page 65: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/65.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Remove bearing cover
• Remove outer bearing cap hex nuts
• Remove outer bearing cap
Removing High Temp. Greased Bearings
![Page 66: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/66.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Remove inner bearing cap fasteners
Removing High Temp. Greased Bearings
![Page 67: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/67.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Push Back Inner Bearing Cap Toward Mechanical Seal Cartridge
Removing High Temp. Greased Bearings
![Page 68: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/68.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Greased bearings are shrunk onto the shaft for interference fit
• Must be pulled off with a bearing puller
• Best practice is not to reuse a bearing that has been pulled off a shaft
Removing High Temp. Greased Bearings
![Page 69: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/69.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Use recommended lubricant or equivalent
• Add grease to the grease fitting using a grease gun
Greasing High Temperature Bearings
![Page 70: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/70.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Old grease will come out here
• Old grease will slip under the lip seal
• Add new grease until a color change is observed with the old grease
Greasing High Temperature Bearings
![Page 71: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/71.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Can be pressed out with a hydraulic press
• Need to be pressed in with one forceful movement with no stops or hesitation
• Stopping mid way or hesitation may result in breaking the carbon bushing
Helpful Hint Carbon Bushings
![Page 72: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/72.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Tungsten Carbide Bushings can be pressed out with a hydraulic press
• Bracket or idler needs to be heated to 425° C before installing tungsten carbide bushings
• Safety provisions for handling hot materials required
Helpful Hint Tungsten Carbide Bushings
![Page 73: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/73.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Grease and oils designed to take years to break down
• Contaminants of moisture and particulate from dust and dirt degrade grease and oils
• Cleanliness is critical • Tips of grease guns need to be clean
Lubrication Helpful Hints
![Page 74: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/74.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Grease fittings should be cleaned before using • Work environment should be clean so as to avoid
introducing particulate into grease or oil • Use manufacturer recommend lubricants or cross-
over equivalents
Lubrication Helpful Hints
![Page 75: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/75.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Concept of predictive maintenance is to identify the need for equipment overhaul before a breakdown
• Planned maintenance is less expensive than responding to break-downs
• Planned maintenance has much less impact on potential loss of production or disruption to production schedules
Predictive Maintenance
![Page 76: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/76.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Significant increases from baseline recordings for temperature and/or vibration are indicators of coming maintenance requirements.
• Bearing temperature increases of 10 °C from baseline is an alarm level, 20 °C increase over baseline is an immediate action level.
• Vibration level increases by a factor of 2 above baseline is an alarm level, vibration increase of 2.5 times baseline is an immediate action level.
Predictive Maintenance How to know when maintenance is necessary?
![Page 77: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/77.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
• Record temperatures as degrees above ambient • Bearing temperature from the pump, gear
reducer, and motor
Predictive Maintenance Suggestion is to record monthly bearing temp. and vibration readings
![Page 78: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/78.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
Learn More About Tuthill Visit Our Websites www.tuthillpump.com www.tuthill.com
Like Us on Facebook
www.facebook.com/tuthillcorporation
Follow Us on Twitter @TuthillCorp
![Page 79: Maintenance Training Module 2 - Tuthill PumpTuthill confidential. • For all pumps, tightening of the mechanical seal is the last step for reassembling pump • Gland nuts should](https://reader036.vdocuments.mx/reader036/viewer/2022062417/613bbbe4f8f21c0c82692a1f/html5/thumbnails/79.jpg)
© Tuthill Corporation. All rights reserved. Tuthill confidential.
Excellence at work. Excellence in life.