Maintenance & Fluids

Mixer SeminarPresented By: Rich Gochenour

Section 2 (Maintenance) Page 3

Continuous Monitoring

Check from wet appearance on gears, tire and support roller

Monitor unusual or irregular sound while mixer is operating

Section 2 Page 3

Daily Maintenance

Check oil distribution on ring gear, tire and support roller

Check auto oilier and fill• 80w90 Gear Lube or 85w140 Gear Lube

Check hydraulic fluid level in sight glass of reservoir

Section 2 Page 3

Weekly Maintenance

Grease Support Roller Bearings (4 zerks)Grease Tilt Cylinder Pins (4 zerks)Grease Tilt Pins (4 zerks)Grease Mixer Drive Reducers (2 zerks)

Bearings and Pins-high quality extreme pressure bearing grease

Section 2 Page 5

Grease Locations

Section 2 Page 3

Monthly Maintenance

File the “Monthly Inspection”Check Oil Level in the Gear ReducerReplace Hydraulic Filters

• Replace quarterly or as needed• 10 micron absolute

Section 2 Page 7

Section 2 Page 4

Section 2 Page 3

Annual Maintenance

Drain and Replace Gear Reducer Oil• Oil-API-GL-5, No.80 or 90-capacity 80 oz.

Drain and Replace Hydraulic Fluid. Replace the hydraulic filters and clean tank.• 120-140 Gallon• See list of recommended fluids.