mahmoud mansour cv
TRANSCRIPT
1
Mahmoud Ahmed Mohamed AbdelBaky Mansour
5th Settlement, New Cairo, Egypt
Mobile no. : (+201000 959 032)
E-mail : [email protected]
Objective
Looking for a challenging career opportunity to be a member in the technical team of a growth oriented
company, to utilize and improve my skills and experience gained from my technical study and Working in
international prestigious companies.
Personal Data
Date Of Birth : 10th of May 1990
Nationality : Egyptian
Marital Status : Married
Military Status : Done
Education
B.Sc. of Mechanical Engineering, Faculty of Engineering, Shoubra, Benha University
Graduation Year: 2012
Graduation grade: Fair (63.72 %)
B.Sc. Year Degree: Very Good
Graduation Project: "Air Conditioning Systems with Thermal cool storage"
Graduation Project Grade: Excellent
Current Job
Working as Mechanical Design Engineer at :
From (16-8-2015) Till Now
Job Description:
Implements specific Plumbing & Fire fighting works in accordance with the work program of a project or as
requested within my department
Prepares and assists with the preparation of technical reports, schemes, bills of quantities, cost estimates, etc.
Carries out designs of Plumbing & Fire Fighting works, drawings, tender documents, etc., as required
Undertakes special and/or project assignments as required by the senior or Principal Engineer.
2
PROJECTS:
AL-MASSA PARK AT THE NEW CAPITAL
- The client is developing approximately 25 feddans located at the New Capital. The aim of the development is to construct a high-end, luxurious hotel. The project comprises hotel buildings, chalets, day-use villas, and a golf course.
AL-REHAB EXT 01 PROJECT: NORTH-TO-THE-CLUB
- Over a land area of 54,029 m2 and with a built-up area of 45,850 m2, the mall comprises a basement for
parking (around 870 cars), retail shops, prayer rooms, toilets, showers & lockers, and services. It also
includes a ground floor (3 entrances, retail shops, anchor stores, kiosks, supermarket, 2 pharmacies,
restaurants, toilets & services); outdoor parking area (around 290 cars); first floor (retail shops, anchor
stores, toilets, and services); and second floor (retail shops, kiosks, food court, restaurants, outdoor terrace,
kids area, mall administration, toilets, and services).
AL-REHAB SHOPPING CENTER (9TH & 10TH ZONES)
- The project comprises a supermarket, food court, fast-food hall, retail shopping center, showrooms, and
service shops. It also comprises an outdoor landscaped area with water features. The project's plot area is
29,416 m2.
SOMA BREEZE PROJECT
- The project comprises four residential blocks, each with a basement, ground floor, first floor, second floor,
and third floor. The total built-up area is 26,550 m2. The basement at the main building has a total area of
2,160 m2, including MEP spaces.
MOUNTAIN VIEW KUWADICO
- The project is set to be developed as a mixed-use development on an area of approximately 216 feddans.
The scope of work involves the design of site infrastructure, plus all utility buildings, as well as MEP design
for 10 types of buildings (each with a basement, ground floor, first floor, and 25% roof).
RENOVATION OF BIYALA, AL-BAYADEYAH, NAGAA HAMMADI, AND ABU TESHT HOSPITALS
- The project comprises 4 hospitals: Biyala Hospital in Kafr Al-Sheikh (3 buildings and 7 service buildings over a
land area of 6,135 m2 with a built-up area of 2,390 m2); Al-Bayadeyah Hospital in Luxor (5 buildings and 4
service buildings over a land area of 4,150 m2 with a built-up area of 2,561 m2); Nagaa Hammadi Hospital in
Qena (5 buildings over a land area of 8,631 m2 with a built-up area of 3,591 m2); and Abu Tesht Hospital in
Qena (5 buildings and 3 service buildings over a land area of 11,870 m2 with a built-up area of 3,603 m2).
Work Experience
Worked as a General Maintenance Engineer at:
Hi-Food Egypt Co. For Food industries (Ülker Egypt)
From (1-11-2013) To (1-8-2015)
3
Job Description:
Overseeing maintenance, repair & troubleshooting of 5 Biscuit Lines
Assisted in the installation and commissioning of the 5th production line (Wafer Line)
Overseeing Modifications of 5 production Lines
Overseeing Installation and Operation of new Machines
Planning of daily, shutdown and preventive activities.
Planning and following up preventive maintenance & following up maintenance's teams (Mechanical - Electrical
- Utilities) to insure that it is achieved.
Following up the ISO documentations & quality assurance.
Monitoring waste rates, analyzing root causes and suggesting means to reduce waste and cost.
Installation and maintenance of Pumps, Heat Exchanger, Boiler, Chiller, HVAC systems
Coordinates, activities of workers engaged in repair, maintenance, and installation of machines, and in
maintenance of buildings, grounds, and utility systems of industrial plant.
Prepares reports, analyzes data, and makes recommendations for improving operations
Build a good relation and interaction behavior between the Maintenance and Production Teams to get the
highest performance either from the machines or people
Managing the time during the periodical Maintenance and putting the perfect plan to do it with short time with
high quality by using the Advanced Maintenance.
Professional Experience
Experience of working with minimal supervision or as part of a small team in analyzing mechanical failures.
Knowledge of considering time constraints like safety, cost and environmental issues.
Have previously worked with multi-national and multi-skilled crews.
Explaining technical problems to non-technical colleagues.
Skills Profile
Advanced presentation skills
Demonstrating consistent achievement of objectives
Strong communication and interpersonal abilities.
Goal oriented.
Strong sense of responsibility.
Relevant Skills
Knowledge of HVAC and Refrigeration Systems Design
- Calculating and Installation of HVAC systems
- Calculate Static Of Equipment And It's Electric Power
- Ventilation And Civil Defense Calculation Of Pressurization And Smoke Extract
- Duct And Pipe Sizing
- Prepare Schedules And Bill Of Quantity And Details Drawing
4
Knowledge of Fire Fighting Systems Design
- Designing Water Sprinkler System , Including Pump Selection .
- Design Gas Extinguishing Systems
-Design Foam System
Knowledge Of Hydraulic Systems
Knowledge of Fluid/Solid Mechanics, Thermodynamics and Aerodynamics
AutoCad 2D and Autodesk Inventor and Autodesk Revit MEP
Some Knowledge of SolidWorks and Matlab
O/S: Win 9X, Win 2002 Professional, Win XP, Win Vista, Win 7, Win 8
Microsoft Office: Word, Excel, Power Point and Outlook
Courses
Project Planning and Control Techniques at (American University In Cairo) (2015)
Autodesk Revit MEP (2014)
Autodesk Inventor (2014)
Fire Fighting Systems Design (2013)
HVAC Systems Design and Load Estimation using hap (2013)
Autocad 2D (2012)
Hydraulic Basics (2011)
Training
Training at Cairo Oil Refining Company
Training at Belayim Petroleum Company (Petrobel)
Training at Military Factory 27 - Shubra Company for Engineering Industries
Languages
Arabic : Mother Tongue
English: Very good
References
Available upon request
Thank you for giving time to read my CV
Mahmoud A. Mansour