maharshi dayanand university, rohtakmriem.org/downloads/files/n5af27d692f790.pdfmaharshi dayanand...

8
MAHARSHI DAYANAND UNIVERSITY, ROHTAK Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per Roll No. List Date Paper Code Subject (Full Nomenclature) ID No. Branches 17.05.2018 CH-101 F Engineering Chemistry (1005) 24005 New Scheme ME-101-F BASICS OF MECH. Engg. (1008) 24008 New Scheme 19.05.2018 MATH-102-F MATHEMATICS-II (1019) 24018 New Scheme 22.05.2018 PHY-102-F PHYSICS-II (1020) 24019 New Scheme 24.05.2018 HUM-102-F COMM. SKILLS IN ENGLISH (1017) 24016 New Scheme BTT-102 F BASICS OF BIO TECH (1018) 24017 New Scheme 26.05.2018 ECE-101-F BASICS OF ELECTRONICS (1004) 24004 New Scheme 29.05.2018 CSE-101-F Fund. of Comp. & Prog. In C (1006) 24006 New Scheme EE-101-F Electrical Technology (1007) 24007 New Scheme Note : 1 Before answering the question paper the candidates should ensure that they have been supplied the correct question paper. Complaints in this regard, if any, shall not be entertained after the examination. 2 Any electronic device / I-Pod / Pager / Mobile phone not allowed in the examination centre at any cost. 3 The use of only simple calculator is allowed. Exchanging of calculator is not allowed. 4 No Candidate will be allowed to enter the Examination Hall without Admit card & College I-Card As amended in the Ordinance's of Engg. Courses vide Resolution No. 58 dated 5.11.2003 of Academic Council :- The Candidate will appear in the Examination in the Paper (s) of their choice in case of clash in the date-sheet and they will not be entitled to claim any benefit consequently Controller of Examinations Theory Date-Sheet for B.E /B.Tech. 2nd Sem.Examinations May /June- 2018

Upload: others

Post on 23-Mar-2021

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: MAHARSHI DAYANAND UNIVERSITY, ROHTAKmriem.org/downloads/files/n5af27d692f790.pdfMAHARSHI DAYANAND UNIVERSITY, ROHTAK Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per

MAHARSHI DAYANAND UNIVERSITY, ROHTAK

Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per Roll No. List

Date Paper Code Subject (Full Nomenclature) ID No. Branches

17.05.2018CH-101 F Engineering Chemistry (1005) 24005 New Scheme

ME-101-F BASICS OF MECH. Engg. (1008) 24008 New Scheme

19.05.2018MATH-102-F MATHEMATICS-II (1019) 24018 New Scheme

22.05.2018PHY-102-F PHYSICS-II (1020) 24019 New Scheme

24.05.2018HUM-102-F COMM. SKILLS IN ENGLISH (1017) 24016 New Scheme

BTT-102 F BASICS OF BIO TECH (1018) 24017 New Scheme

26.05.2018ECE-101-F BASICS OF ELECTRONICS (1004) 24004 New Scheme

29.05.2018CSE-101-F Fund. of Comp. & Prog. In C (1006) 24006 New Scheme

EE-101-F Electrical Technology (1007) 24007 New Scheme

Note :

1 Before answering the question paper the candidates should ensure that they have been supplied the

correct question paper. Complaints in this regard, if any, shall not be entertained after the examination.

2 Any electronic device / I-Pod / Pager / Mobile phone not allowed in the examination centre at any cost.

3 The use of only simple calculator is allowed. Exchanging of calculator is not allowed.

4 No Candidate will be allowed to enter the Examination Hall without Admit card & College I-Card

As amended in the Ordinance's of Engg. Courses vide Resolution No. 58 dated 5.11.2003 of Academic Council :-

The Candidate will appear in the Examination in the Paper (s) of their choice in case of clash in the date-sheet and

they will not be entitled to claim any benefit consequently

Controller of Examinations

Theory Date-Sheet for B.E /B.Tech. 2nd Sem.Examinations May /June- 2018

Page 2: MAHARSHI DAYANAND UNIVERSITY, ROHTAKmriem.org/downloads/files/n5af27d692f790.pdfMAHARSHI DAYANAND UNIVERSITY, ROHTAK Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per

MAHARSHI DAYANAND UNIVERSITY, ROHTAK

Date Paper Code Subject (Full Nomenclature) ID No. Branches

18.05.2018 PT-204 Design & Planning for Print Production 2138 PT

HUM-201 F Engg. Economics 24021 Common for all Branches

BT-204 F Immunology 24187BT

TT-206 F Fabric Manufacture-II 24204 TT

TC-204 F Fabric Formation 24211 FAE, TC

AUE-206 F Automotive Petrol Engines 24221 Automobile Engg

ET-404-F Digital Electronics 24554 ETE

EC-412-F Digital Electronics 24564 Electronic & Computer Engg.

21.05.2018MATH-201 F MATH-III 24022

Common for All Branch's

TT-204 F Yarn Manufacture-II 24203TT

TC-202 F Unit Organic Process & Chemical Engg. 24210TC

FA-204 F Color & Design Concepts 24216FAE

AUE-204 F Heat Transfer and Combustion 24220Automobile Engg

ET-402-FComputational Techniques 24552

ETE

CSIT-201-F Analog Electronics 24581CSIT

23.05.2018PT-206 Flexography 2139 PT

EE-204 F Digital Electronics 24143 ECE, EI, EE, EEE, IC, AEIE

CSE-208 F Internet Fundamentals 24163 CSE, IT, CSIT, Elec. & Com Engg

ME-206 F S.O.M-I 24171 ME,MAE

BT-208 F Bioprocess Engineering - I 24189 BT

CE-206 F Design of Concrete structure-I 24197 Civil Engg.

TT-210 F Computer Aided Designing 24206 TC, TT

FA-206 F Apparel Merchandising 24217 FAE

AUE-210 F Design of M/c. Elements 24223 Automobile Engg

ET-405-F Signals & Systems 24555 ETE

FT-210-F Pumping Machinery and Fluid Mechanics 24765 Fire Tech. & Safety

25.05.2018PT-208 Printing Materials 2140 PT

EE-208 F Electromagnetic Theory 24144 ECE, EI, EE, EEE, IC, AEIE

CSE-210 F Computer Architecture & Organisation 24165IT, CSE, CSIT, AEIE, Ele & Com. Engg (Common

with 6th)

ME-208 F Fluid Mechanics 24172 ME, MAE

BT-210 F Bio-analytical Techniques 24190 BT

CE-208 F Surveying-II 24198 Civil Engg.

MA-201 F Applied Stastics & Operations Research 24207 TC, TT

FA-208 F Apparel Production-II 24218 FAE

ET-406-F Field & Waves 24556 ETE

FT-202-F Safety Engg. And Management 24761Fire Tech. & Safety

Theory Date-Sheet for B.E /B.Tech. 4th Sem.Examinations May /June - 2018Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per Roll No. List

Page 3: MAHARSHI DAYANAND UNIVERSITY, ROHTAKmriem.org/downloads/files/n5af27d692f790.pdfMAHARSHI DAYANAND UNIVERSITY, ROHTAK Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per

28.05.2018 PT-202 Graphic Design 2137 PT

EE-220 F Principals of Comm. System 24147 EEE/EE

EE-206 F Communication System 24152 ECE (Common with 6th Sem)

IT-202 F O.O. Programming using c++ 24164 CSE, IT,CSIT

ME-204 F Kinematics of M/c 24170 ME, MAE

BT-206 F Industrial Microbiology 24188 BT

CE-204 F Fluid Mechanics-II 24196 Civil Engg.

TT-208 F Fabric Structure 24205 FAE, TT

TC-206 F Preparatory Wet Processing 24212 TC

AUE-208 F Theory of M/c. 24222 Automobile Engg

ET-403-F Electronics Instrumentation & Measurement 24553 ETE

EC-413-F Analog Communication Systems 24565 Electronic & Computer Engg.

FT-208-F Electrical Fire Safety 24764 Fire Tech. & Safety

30.05.2018 PT-212 Electrical Mech & its Utilization in Printing 2142 PT

EE-212 F Transmission & Distribution 24141 EE, EEE

EE-228 F Signals & Systems 24151 ECE, EIE, AEIE

CSE-202 F D.B.M.S 24162 CSE, IT, CSIT,Elec & Com Engg.

ME-202 F Manufacturing Tech-I 24169 ME

BT-202 F Molecular Biology 24186 BT

CE-202 F Structural Analysis-II 24195 Civil Engg.

TT-202 F Man Made Fiber Production 24202 TC, TT

FA-202 F Evolution of Clothing & Fashion 24215 FAE

AUE-202 F Engg. Analysis & Numerical Methods 24219 Automobile Engg

ET-401-F Basics of Industrial Sociology Eco. & Mgt. 24551 ETE

MAE-212-F Manufacturing M/Cs 24621 MAE

FT-204-F Energy Environment Ethics and Society 24762Fire Tech. & Safety

01.06.2018 PT-210 Electonics Composition 2141 PT

EE-202 F Analog Electronics 24142 ECE, EI, EE, EEE, IC, AEIE

IT-204 F Multimedia Tech. 24166 I.T,CSIT

ME-210 F Steam & Power Generation 24173 ME

BT-212 F Biostatics 24191 BT

CE-210 F Construction & Concrete Technology 24199 Civil Engg.

AUE-212 F Measurement & Instrumentations 24224 Automobile Engg

MAE-213-F Microprocess & Application 24622 MAE

FT-206-F Strength of Material 24763 Fire Tech. & Safety

04.06.2018CSE-204 F Programming Language 24176 CSE,CSIT

Note : 1 Before answering the question paper the candidates should ensure that they have been supplied the

correct question paper. Complaints in this regard, if any, shall not be entertained after the examination.

2 Any electronic device / I-Pod / Pager / Mobile phone not allowed in the examination centre at any cost.

3 The use of only simple calculator is allowed. Exchanging of calculator is not allowed.

4 No Candidate will be allowed to enter the Examination Hall without Admit card & College I-Card

As amended in the Ordinance's of Engg. Courses vide Resolution No. 58 dated 5.11.2003 of Academic Council :-

The Candidate will appear in the Examination in the Paper (S) of their choice in case of clash in the date-sheet and

they will not be entitled to claim any benefit consequently

Controller of Examinations

B.E / B.Tech. 4th Semester (Page-2)

Page 4: MAHARSHI DAYANAND UNIVERSITY, ROHTAKmriem.org/downloads/files/n5af27d692f790.pdfMAHARSHI DAYANAND UNIVERSITY, ROHTAK Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per

MAHARSHI DAYANAND UNIVERSITY, ROHTAK

Date Paper Code Subject (Full Nomenclature) ID No. Branches

17.05.2018 PT-302 Printing Management 2356 PT

EE-310-F Digital Systems Design 24324 EE,IC, CSE, EI,ECE, AEIE

Math-302 F Operation Research 24336 IT

EE-344 F Transmission Lines & Network 24339 EEE

ME-306-F Heat Transfer 24356 ME

BTF-306 Food Bio Technology 24373 BT

CE-306 F Geotechnology 24380 Civil Engg.

TT-302 F Modern Methods of Yarn Production 24386 TT

TC-302 F Processing of Synthetics & Blends 24394 TC

FA-302 F Dyeing of Textiles 24400 FAE

AUE-302-F Automotive Electrical System & Electronics 24411 AUE

MAE-302-F Optimization Techniques for Engin. Syst. 24571 MAE

ET-601 Fundamentals of Management 24771 ETE

FT-302-F Legal Aspect of Safety Health and Envi. 24831 Fire Tech & Safety

19.05.2018 PT-304 Print Finishing 2357 PT

EE-308-F /

EE-312-F Microcontroller & Embedded Systems 24321 EE, BME/ ECE,EI,EEE,AEIE

IT-302- F Network Programming 24331 IT

ME-310-F Measurement & Instrum. 24358 ME

CSE-306 F Analysis and Design of Algorithm 24362 CSE

BTF-308 Environmental Bio Technology 24374 BT

CE-302 F Design of Concrete Structure-II 24378 Civil Engg.

TT-304 F Febric Manufacture - IV 24387 TT

TC304 F Textile Printing 24395 TC

FA-304 F Textile & Garment Testing 24401 FAE

AUE-304-F Vehicle Body Engineering 24412 AUE, AEIE

MAE-304-F Metrology & Quality Assurance 24572 MAE

ET-602 Control System Engg. 24772 ETE

CSE-206-F Theory of Auomata & Computation 24786 CSIT, Electronics & Computer Engg.

FT-304-F Fire Safety Codes and Standardization 24832 Fire Tech & Safety

22.05.2018 PT-306 Printing Substractes 2358 PT

EE-312- F Power System - II 24319 EE, EEE

EE-302-F Microwave & Radar Engg 24326 ECE

EI-302 F Industrial Electronics 24349 EI,AEIE

ME-302-F Automobile Engg 24354 ME

IT-303-F Syst. Prog. & Syst. Admn. 24361 IT, CSE, CSIT

BTF-310 Bio Material Engineering 24375 BT

CE-304 F Irrigation Engineering - I 24379 Civil Engg.

TT-306 F Textile Testing - II 24388 TT,TC

FA-306 F Garment Production Machines & Equip. 24402 FAE

AUE-306-F Two and Three Wheelers 24413 AUE, CSE

EC-614-F Digital Signal Processing 24792 Electronics & Computer Engg.

MAE-306-F Computer Aided Manufacturing 24573 MAE

ET-603 VHDL & Digital Design 24773 ETE

FT-306-F Fire Fighting & Safety Equipments 24833 Fire Tech & Safety

Theory Date-Sheet for B.E /B.Tech. 6th Sem.Examinations May /June - 2018Time of Exam. 2.30 P.M. to 5.30 P.M. / Center of Exam : As per Roll No. List

Page 5: MAHARSHI DAYANAND UNIVERSITY, ROHTAKmriem.org/downloads/files/n5af27d692f790.pdfMAHARSHI DAYANAND UNIVERSITY, ROHTAK Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per

24.05.2018 PT-310 Printing Image Generation-II 2360 PT

EE-306 F VLSI Design 24327 EEE, ECE

CSE-307 F Web Development 24334 IT

ME-312-F Industrial Engg. 24359 ME

BTF-304 Animal Biotechnology 24372 BT

CE-310 F Transportation Engg- II 24382 Civil Engg.

TT-310 F Textile Chemical Processing - II 24390 TT

TC-310 F Garment Processing & Quality Control 24397 TC

FA-310 F Apparel Marketing Merchandising 24404 FAE

AUE-310-F Quality Control & Reliability Engineering 24415 AUE

MAE-310-F Automation in Manufacturing 24575 MAE

ET-605 Digital Communication 24775 ETE

EC-611-F Computer System Engineering 24791 Electronics & Computer Engg.

FT-310-F Applied Numerical Tech and Computing 24835 Fire Tech & Safety

25.05.2018 CSE-210 F Computer Architecture & Organization 24165

AEIE, IT (Common with 4th Sem.) TIME

9.30 AM to 12.30 PM

26.05.2018 PT-308 Printing Ink Technology 2359 PT

EE-318-F Electric Power Generation 24323 EE,EEE, ECE

CSE-304-F Intelligent System 24333 CSE, IT, CSIT

EI-304 F Communication Circuit & Systems 24350 EI, AEIE

ME-304-F Mech. M/c. Design II (4 Hrs Paper) 24355 ME

BTF-302 Plant Bio Tech. 24371 BT

CE-308 F Sewerage & Sewage Treat. 24381 Civil Engg.

TT-308 F Mechines of Textile Machinery 24389 TT

TC-308 F Textile Finishing - I 24396 TC

FA-308 F Knitted Garment Technology 24403 FAE

AUE-308-F Automotive Pollution & Control 24414 AUE, AEIE

EC-615-F Information Security System 24793 Electronics & Computer Engg.

MAE-308-F Mechatronics 24574 MAE

ET-604 Digital Signal Processing 24774 ETE

FT-308-F Identification and Risk Assessment 24834 Fire Tech & Safety

28.05.2018 EE-206 F Communication System 24152

BME (Common with 4th Sem)TIME 9.30

AM to 12.30 PM

29.05.2018 PT-312 Offset Technology-II 2361 PT

EE-304-F Control System Engg. 24322 EE,EL,EEE,ECE

CSE-302-F Principles of Software Engg. 24332 CSE, IT, CSIT, Electro & Comp Engg.

ME-308-F Automatic Control 24357 ME, MAE

CE-312 F Engineering Geology 24383 Civil Engg.

HUM-312 F Merchandising & Export Management 24391 TT,TC

FA-312 F Structure & Properties of Textile 24405 FAE

ET-606 Computer Communication Network 24776 ETE

AUE-404-F Transport Management & Auto. Industry 24781 AUE(Common with 8th Sem)

FT-312-F Heat Transfer Combustion and Explosives 24836 Fire Tech & Safety

31.05.2018 IT-305-F Computer Networks 24328 CSE, EI, ECE,CSIT, Ele. & Com Engg.

EE-314 F Comp. Aided Electric Machine 24320 EE, EEE

02.06.2018 EE-402-F Wireless Communication 24335 CSE, IT ,CSIT (Common with 7th Sem)

CSE-403-F Software Project Management 24466

Electronics & Computer

Engg.(Common 7th , 8th Sem.)

05.06.2018 CSE-305-F Analysis and Design of Algorthms 24842 CSIT (Common with 8th Sem) TIME 9.30 AM to

12.30 PM

Note :

1 Before answering the question paper the candidates should ensure that they have been supplied the

correct question paper. Complaints in this regard, if any, shall not be entertained after the examination.

2 Any electronic device / I-Pod / Pager / Mobile phone not allowed in the examination centre at any cost.

3 The use of only simple calculator is allowed. Exchanging of calculator is not allowed.

4 No Candidate will be allowed to enter the Examination Hall without Admit card & College I-Card

Controller of Examinations

B.E / B.Tech. 6th Semester (Page-2)

Page 6: MAHARSHI DAYANAND UNIVERSITY, ROHTAKmriem.org/downloads/files/n5af27d692f790.pdfMAHARSHI DAYANAND UNIVERSITY, ROHTAK Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per

Date & Day Syll. Code Subject (Full Nomenclature) Paper ID Branches

18.05.2018 PT-411 Continues Stationary & Security Printing 2459 PT

EE-403 F Electric Drives & Control 24421 EE, EEE

ECE-403 F Satellite Comm. Engg. 24441 ECE

ME-401 F Strength Of Material - II 24476 ME

CE-401 F Design of Steel structure-II 24511 CE

TT-401F High Perfometics Fiber 24523 TT

TC-403 F Textile Finishing-II 24531 TC

FA-401 F Printing of Textiles 24534 FAE

MAE-401-F Networking System 24731 Mech. & Automation

ET-720-F Microcontroller 24820 ETE

21.05.2018 EE-409-F Computer Application to Power Sys Anal 24424 EE

EE-407 F PLCS & SCADA 24438 IC, EEE

ECE-405 F Wireless Communication 24440 EI, ECE

IT-407 F Web Engg. 24468 IT

ME-405 F Operation Research 24478 ME

CSE-405 F Compiler Design 24488 CSE,CSIT

CE-405 F Estimating & Costing 24513 CE

TT-405 F Production Planning & Quality Mgt. 24525 TT, TC

ME-401-F Automobile Engg. 24726 Automobile Engg.

MAE-403-F Computer Integrated Manufacturing 24732 Mech. & Automation

FT-403-F Industrial Engineering 24862 FTS

23.05.2018 EE-405 F Power Sys Operation & Control 24423 EE

EEE-413 F Microcontroller & Embedded System 24437 IC, EEE

ECE-407 F Data Communication 24442 ECE

CSE-409 F Advanced Java 24469 CSE, IT

ME-403 F Refrigeration & Air-conditioning 24477 ME, M&A,MAE

CE-403 F Disaster Mitigation & Management 24512 CE

TT-403 F Multifiber Spinning 24524 TT

TC-401-F Textile Chemical Testing 24530 TC

FA-403 F Textile and Apparel Costing 24535 FAE

AUE-405-F Operations Research & Industrial Mgt. 24722 Automobile Engg.

FT-405-F Operational Research 24863 FTS

25.05.2018 ECE-409 F Digital Signal Processing 24422 EI, ECE, EE, IC, EEE

ME-407 F Power Plant Engineering 24479 ME

CSE-407 F Neural Network 24489 CSE,CSIT

CE-407 F Irrigation Engineering - II 24514 CE

TT-407 F Engineering of textile Structural-I 24526 TT

TC-407-F Wet Processing Machinery 24532 TC

FA-405-F Automation in Garment Industry 24536 FAE

AUE-403-F Vehicle Dynamics 24721 Automobile Engg.

MAE-405-F Robotics Engg. 24733 Mech. & Automation

28.05.2018 EE-450-F Power Management 24436 EE

EE-434-F Advance Instrumentation 24439 EEE

ECE-415 F Optical Communication 24443 EC, EI, ECE

ME-409 F Mechanical vibration 24480 ME, M&A,MAE

CE-451 F Hydro Power engineering 24515 CE

TT-409 F Textile Costing 24527 TT

TC-409 F Theory of Coloration & Comp. Color Matching 24533 TC

MAHARSHI DAYANAND UNIVERSITY, ROHTAKTheory Date-Sheet for B.E / B.Tech. 7th Sem. Examinations May/June-2018

Time of Exam. 2.30 P.M. to 5.30 P.M. / Center of Exam : As per Roll No. List

Page 7: MAHARSHI DAYANAND UNIVERSITY, ROHTAKmriem.org/downloads/files/n5af27d692f790.pdfMAHARSHI DAYANAND UNIVERSITY, ROHTAK Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per

30.05.2018 EE-432-F EHV AC/DC 24431 EE

EE-442 F High Voltage Engineering 24434 Elective Subject

EE-444 F Electrical Power Quality 24435 Elective Subject

ECE-419 F Mobile Communication 24444 Elective Subject

ECE-453 F Radar & Sonar Engg. 24446 Elective Subject

ECE-411 F Wireless Sensor Network 24447 Elective Subject

CSE-423 F Distributed Operating System 24471 Elective Subject

IT-465 F Network Security & Management 24472 Elective Subject

CSE-435 F Advanced Data Base Management System 24473 Elective Subject

IT-467 F Computer Software Testing 24474 Elective Subject

IT-473 F High Speed Network 24475 Elective Subject

ME-417 F Quality Engg 24481 Elective Subject

ME-425 F Computer Integrated Manufacturing 24484 Elective Subject

ME-431 F Solar Energy Engineering 24486 Elective Subject

CE-411 F Environmental Pollution & Control 24518 Elective Subject

CE-421 F Environment Impact & Management 24520 Elective Subject

CE-423 F Element of earthquake Engg. 24521 Elective Subject

TT-411 F Finance Material & HRM 24528 TT,TC

FA-411 F Indian Business Environment 24539 FAE

01.06.2018 HUM-453 F Human resource Management 24426 Open Elective

HUM-459 F Renewable Energy Resources & Technology 24427 Open Elective

IC-455--F Intelligent Instrumentation for Engg. 24429 Open Elective

IT-401 F Data Warehousing & Data Mining 24465 IT, CSE, Electr & Com. Engg

CE-453 F Ground Water Engineering 24516 CE

ME-420-F Industrial Engineering 24784

AUE(Common with 8th

Sem)

02.06.2018EE-402-F Wireless Communication 24335

CSE, IT ,CSIT (Common with

6th Sem)

ME-402-F/

AUF-411-F Computer Aided Design 24782

AUE (Common with 8th

Sem)

CSE-403-F Software Project Management 24466

Electronics & Computer

Engg.(Common 6th & 8th

Sem.)

04.06.2018

IT-403 F System & Network Administration 24467

IT(Common with 8th Sem)

TIME 9.30 AM to 12.30 PM

CSE-401 F Advanced Computer Architecture 24487 CSE,CSIT

FA-407-F Computer Aided Designing 24537 FAE

Note :

1 Before answering the question paper the candidates should ensure that they have been supplied the

correct question paper. Complaints in this regard, if any, shall not be entertained after the examination.

2 Any electronic device / I-Pod / Pager / Mobile phone not allowed in the examination centre at any cost.

3 The use of only simple calculator is allowed. Exchanging of calculator is not allowed.

4 No Candidate will be allowed to enter the Examination Hall without Admit card & College I-Card

As amended in the Ordinance's of Engg. Courses vide Resolution No. 58 dated 5.11.2003 of Academic Council :-

The Candidate will appear in the Examination in the Paper (S) of their choice in case of clash in the date-sheet

and they will not be entitled to claim any benefit consequently

Controller of Examination

B.E / B.Tech. 7th Semester (Page-2)

Page 8: MAHARSHI DAYANAND UNIVERSITY, ROHTAKmriem.org/downloads/files/n5af27d692f790.pdfMAHARSHI DAYANAND UNIVERSITY, ROHTAK Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per

MAHARSHI DAYANAND University, ROHTAK

Date Paper Code Subject (Full Nomenclature) ID No. Branches

29.05.2018

AUE-404-F

Transport Management & Auto. Industry

24781 AUE(Common with 6th Sem) TIME 2.30

PM to 5.30 PM

31.05.2018PT-402 Packing Technology

2461PT

TT-402-F Post Extrusion Operations 24591 TC,TT

FA-402-F High Tech Garments 24611 FAE

ET-802-F Wireless and Mobile Communication 24851 ETE

01.06.2018 ME-420-F Industrial Engg. 24784

AUE(Common with 7th Sem) TIME 2.30

PM to 5.30 PM

FA-412-F(ii) Home Fashions 24617 FAE

02.06.2018 PT-404 Printing Machine Maintenance 2462 PT

CSE-403-F Software Project Management 24466Electronics & Computer Engg.(Common 6th &

7th Sem.) TIME 2.30 PM to 5.30 PM

TC-404-F Developments in Textile Chemical Processing 24592 TC

TT-404-F Spining Technology 24601 TT

FA-404-F Quality Assurance in Apparel Industry 24612FAE

ME-402-F/ AUF-

411-F Computer Aided Design 24782

AUE(Common with 7th Sem) TIME 2.30

PM to 5.30 PM

ET-804-F Radar Engineering 24852 ETE

04.06.2018

IT-403-F System & Network Admn.

24467 CSIT (Common with 7th Sem)

TIME 2.30 PM to 5.30 PM

ME-428-F Management Information Systems 24839 AUE

TC-406-F Process Control in Chemical Processing 24593 TC

TT-406-F Complex Textiles 24602 TT

FA-406-F Fashion Accessories 24613 FAE

PT-406 Newspaper Technology 2463PT

EC-818-F Telecommunication-Switching and Networks 24847Elect. & Computer Engg.

ET-806-F Multimedia Communication 24853 ETE

05.06.2018 PT-408 Printing Costing & Estimating 2464 PT

TC-408-F Knitting & Kniit Proc. Or Eco-Friendly Proc. &

Manufacturing of Textiles

24594 TC

EC-812-F Satellite Communication 24846 Elect. & Computer Engg.

TT-408-F Engineering of Textile Structures-II 24603 TT

FA-408-F Retailing & Fashion Promotion 24614 FAE

CSE-305-F Analysis and Design of Algorthms 24842 CSIT,Elect. & Computer Engg.(Common with 6th

Sem)

ET-824-F Embedded System Design 24854 ETE

06.06.2018 PT-410 Digital Printing 2465 PT

TT-410-F Technical Text. Or Global Scenario of Tex. Ind. 24595 TC,TT

ET-826-F Neuro Fuzzy System 24855 ETE

FA-410-F Chemical & Mechanical Finishing of Textiles 24615 FAE

07.06.2018 CSE-412-F Computer Network & Applications 24596 TC,TT

ET-830-F Transducers and Their Application 24856 ETE

PT-412 Printing Plant Layout 2466 PT

FA-412-F Advanced Apparel Construction Techniques 24616 FAE

Note :

1 Before answering the question paper the candidates should ensure that they have been supplied the

correct question paper. Complaints in this regard, if any, shall not be entertained after the examination.

2 Any electronic device / I-Pod / Pager / Mobile phone not allowed in the examination centre at any cost.

3 The use of only simple calculator is allowed. Exchanging of calculator is not allowed.

4 No Candidate will be allowed to enter the Examination Hall without Admit card & College I-Card

As amended in the Ordinance's of Engg. Courses vide Resolution No. 58 dated 5.11.2003 of Academic Council :-

The Candidate will appear in the Examination in the Paper (S) of their choice in case of clash in the date-sheet and

they will not be entitled to claim any benefit consequently

Theory Date-Sheet for B.E / B.Tech. 8th Sem. Examinations May/June - 2018Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per Roll No. List

Controller of Examinations