magnus set ix mechanical set packer product no.: mg-550
TRANSCRIPT
www.maximuscompletions.com
PACKER SYSTEMS
MagnusSet – IXMechanical Set Testing Packer
MagnusSet - IX Mechanical Set Production Packer is a retrievable, double-
grip compression - or tension - set production packer that can be left in
tension, compression, or in a natural position, and will hold pressure from
above or below.
A large internal bypass reduces the swabbing effect during run-in and
retrieval, and closes when the packer is set. When the packer is released,
the bypass opens first, allowing the pressure to equalize before the upper
slips are released.
FEATURES:
Sets securely in any hardness casing, including P-110.
Pressure Rating up to 10,000 Psi.
Temperature rating up to 350 Degree F.
¼ Turn Set & ¼ Turn (to right) Release type packer.
Emergency Shear Release feature, shear rating 50,000 Lbs.
Can be left in tension, compression, or neutral position
Metallurgy L-80, 9Cr. 1 Moly, 13Cr. Flow wet parts
www.maximuscompletions.com
PACKER SYSTEMS
All Premium & Drill Pipe connections are available on request.Elastomers available: Nitrile, HNBR, HSN, Viton, Aflas
5.00’’
Casing O.D.
Maximum Packer
O.D.
11.5 – 15.018.0 – 20.8
Casing Weight
4.408’’4.156’’
Minimum Casing I.D.
4.125’’4.000’’
1.938’’1.938’’
Packer I.D.
2-3/8’’ EU2-3/8’’ EU
Connection
5-1/2’’
20.0 – 23.014.0 – 20.020.0 – 23.015.5 – 17.09.0 – 13.0
4.670’’4.892’’4.670’’4.892’’5.044’’
4.500’’4.625’’4.500’’4.625’’4.875’’
1.984’’1.984’’2.375’’2.375’’2.359’’
2-3/8’’ EU2-3/8’’ EU2-7/8’’ EU2-7/8’’ EU2-7/8’’ EU
MagnusSet – IXMechanical Set Testing Packer
Casing & Packer Dimension Table
6-5/8’’ 24 - 28 5.791’’ 5.588 2.900’’ 3-1/2’’ EU
7.0’’
26.0 – 32.017.0 – 26.017.0 – 26.026.0 – 35.0
5.875’’6.276’’6.276’’6.004’’
5.890’’6.000’’6.000’’5.875’’
2.500’’2.500’’3.000’’3.000’’
2-7/8’’ EU2-7/8’’ EU3-1/2’’ EU3-1/2’’ EU
9-5/8’’43.5-53.532.3-43.5
8.535’’8.755’’
8.250’’8.500’’
4.000’’4.000’’
4-1/2’’ EU4-1/2’’ EU
Note*:
10-3/4" 32.75-45.50 9.950" 10.192" 4.000’’ 4-1/2’’ EU
MagnusSet – IXMechanical Set Testing Packer
Packer Setting Procedure
Run the packer to setting depth. Pick up and slack off to establish true
slack-off and pick-up weights. Pick up on tubing and rotate ¼ turn to the
right at the packer. Lower tubing to engage slips, release right hand torque
while moving downward. (Tubing must be able to rotate back to the left at
packer to lock into set position.) Continue to set weight on packer to pack
off elements.
After setting weight on packer, pick up on tubing and pull tension into
packer to engage upper slips and complete element pack off. Repeat
setting weight and pulling tension 2-3 times before landing tubing. Packer
may be landed in compression, tension, or neutral position.
www.maximuscompletions.com
PACKER SYSTEMS
Releasing Procedure
The releasing procedures are the same whether the packer has been
tension or compression set. Set down weight (normally 1,000 lbs. is
sufficient) on the packer and rotate the tubing ¼ turn to the right at the
packer, then pick up holding the right hand torque.
The internal bypass will open, allowing pressure to equalize. Further pick
up releases the patented releasing sequential slip system, relaxing the
elements, allowing the packer to be removed from the well. The packer
can be moved and reset without tripping the pipe if the Elastomers have
not been permanently altered from the well environment.
www.maximuscompletions.com
PACKER SYSTEMS
5.00’’
SIZE(Inch)
MagnusSet – IXPacker Setting Forces
Setting Forces Guide
12,000 Lbs.
Minimum Force required at Packer(Lbs.)
Low Temp.
TemperatureRating
MiddleElement(Duro)
60 -125
TemperatureRange Deg (F)
80
UpperElement(Duro)
60 80
End Element(Duro)
5-1/2’’ 12,000 Lbs.
7.00’’ 14,000 Lbs.
9-5/8’’ 25,000 Lbs.
Packing Element Guide
Standard 125 – 225 90 70 90
Moderate 225 – 275 80 80 80
High 275 – 350 90 80 90
10-3/4’’ 30,000 Lbs.
46
MagnusSet – IX
www.maximuscompletions.com
PACKER SYSTEMS
QTY PART NO. MATERIALSr. # DESCRIPTION
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
MAGNUS SET I-X
TOP SUB
SPRING CAGE CAP
SPRING CAGE
F0LLOWER SPRING
UPPER SLIP BODY
SPRING RETAINING RING
UPPER SLIP SPRING
UPPER SLIP
RELEASING SLIP
INNER MANDREL
UPPER CONE
O-RING #155
SEAL ASSEMBLY NIT
SEAL RING A
SEAL RING B
O-RING # 243
CENTRE COUPLING
GAGE RING
PACKING ELEMENT NIT 90D
RUBBER SPACER
PACKING ELEMENT NIT 70D
RUBBER MANDREL
RUBBER MANDREL [PART-1]
RUBBER MANDREL [PART-2]
RUBBER RETAINER
LOWER CONE
LOWER SLIP
LOWER SLIP SPRING
CONTROL BODY
DRAG BLOCK, DB 800 CASE HARDN
1
1
1
1
1
1
1
6
2
1
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1
1
1
4
8
1
6
M550-72
M550-72-610
M550-72-810
M550-72-310
M550-72-920
M550-72-320
M550-72-820
M550-72-901
M550-72-115X
M550-72-125
M550-72-210
M550-72-410
O-155-NB
M550-72-520
M550-72-520A
M550-72-520B
O-243-NB
M550-72-620
M550-72-830
M550-72-513N
M550-72-840
M550-72-511N
M550-72-220
M550-72-220A
M550-72-220 B
M550-72-850
M550-72-420
M550-72-131
M070-70-900
M550-72-330
M090-80-900
-
4140
4140
4140
SPRING STEEL
4140
4140
SPRING STEEL
8620
8620
4140
4140
NITRILE
-
4140
4140
NITRILE
4140
4140
NITRILE
4140
NITRILE
4140
4140
4140
8620
SPRING STEEL
4140
8180
SPRING STEEL
4140
[MG-550-72]7" 17-26 PPF
46www.maximuscompletions.com
PACKER SYSTEMS
QTY PART NO. MATERIALSr. # DESCRIPTION
31
32
33
34
35
36
37
38
39
40
41
DRAG BLOCK SPRING
DRAG BLOCK RETAINER
SET SCREW HEX SKT 3/8-18 UNC 1/2
RUBBER MANDREL CAP
O-RING #237
J BODY SUB-ASSEMBLY
J-BODY
J-BODY RING
BOTTOM SUB ASSEMBLY
BOTTOM SUB
J PIN RING
36
1
3
1
1
1
1
1
1
1
1
M091-01-900
M550-72-910
M003-C6-008
M550-72-230
O-237-NB
M550-72-340
M550-72-340A
M550-72-340B
M550-72-651
M550-72-651A
M550-72-651B
MS
4140
NITRILE
4140
4140
4140
4140
4140
4140
4140
4140
MagnusSet – IX [MG-550-72]7" 17-26 PPF
46
MagnusSet – IX
www.maximuscompletions.com
PACKER SYSTEMS
QTY PART NO. MATERIALSr. # DESCRIPTION
[MG-550-1034]10-3/4" 32.75-45.50 PPF
MAGNUS SET I-X
TOP SUB
SPRING CAGE CAP
SPRING CAGE
F0LLOWER SPRING
UPPER SLIP BODY
UPPER SLIP SUPPORT
SPRING RETAINING RING
UPPER SLIP SPRING
UPPER SLIP
RELEASING SLIP
INNER MANDREL
UPPER CONE
O-RING #160
SEAL ASSEMBLY NIT
SEAL RING A
SEAL RING B
O-RING # 254
CENTRE COUPLING
GAGE RING
PACKING ELEMENT NIT 90D
RUBBER SPACER
PACKING ELEMENT NIT 70D
RUBBER MANDREL
RUBBER MANDREL [PART-1]
RUBBER MANDREL [PART-2]
RUBBER RETAINER
LOWER CONE
LOWER SLIP
LOWER SLIP SUPPORT
LOWER SLIP SPRING
CONTROL BODY
DRAG BLOCK, DB 900 CASE HARDN
1
1
1
1
1
1
1
1
6
2
1
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1
1
1
4
1
8
1
6
M550-1034
M550- -610
M550- -810
M550- -310
M550- -920
M550- -320
M550-1034-720
M550- -820
M550- -901
M550- -115X
M550- -125
M550- -210
M550- -410
O-160-NB
M550- -520
M550- -520A
M550- -520B
O-254-NB
M550- -620
M550- -830
M550- -513N
M550- -840
M550- -511N
M550- -220
M550- -220A
M550- -220 B
M550- -850
M550- -420
M550- -131
M070-70-900
M550- -330
M090-90-900
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
1034
M550-1034-730
1034
-
4140
4140
4140
SPRING STEEL
4140
4140
4140
SPRING STEEL
8620
8620
4140
4140
NITRILE
-
4140
4140
NITRILE
4140
4140
NITRILE
4140
NITRILE
4140
4140
4140
8620
SPRING STEEL
4140
4140
8180
SPRING STEEL
4140
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
46www.maximuscompletions.com
PACKER SYSTEMS
QTY PART NO. MATERIALSr. # DESCRIPTION
33
34
35
36
37
38
39
40
41
42
43
DRAG BLOCK SPRING
DRAG BLOCK RETAINER
SET SCREW HEX SKT 3/8-18 UNC 1/2
RUBBER MANDREL CAP
O-RING #348
J BODY SUB-ASSEMBLY
J-BODY
J-BODY RING
BOTTOM SUB ASSEMBLY
BOTTOM SUB
J PIN RING
36
1
3
1
1
1
1
1
1
1
1
M091-01-900
M550- -910
M003-C6-008
M550- -230
O-348-NB
M550- -340
M550- -340A
M550- -340B
M550- -651
M550- -651A
M550- -651B
1034
1034
1034
1034
1034
1034
1034
1034
MS
4140
NITRILE
4140
4140
4140
4140
4140
4140
4140
4140
MagnusSet – IX [MG-550-1034]10-3/4" 32.75-45.50 PPF
www.maximuscompletions.com
PACKER SYSTEMS
Magnus Set IX HTHP 10KMechanical Set Packer
The Magnus Set IX HTHP 10K packer to withstand 10,000 Psi.,
of differential pressure above or below.
The Magnus Set IX HP packer can withstand 7,500 Psi., of
differential pressure above or below.
Production Pumping Injection Fiberglass tubing Zonal isolation
FEATURES:
Sets securely in any hardness casing, including P-110.
Pressure Rating up to 10,000 Psi.
Temperature rating up to 350 Degree F.
¼ Turn Set & ¼ Turn (to right) Release type packer.
Emergency Shear Release feature,
Can be left in tension, compression, or neutral position
Metallurgy L-80, P-110
Magnus Set IX HPMagnus Set IX HTHP