magnetic drive pumps - gri – the pump people drive pumps p r e s e n t s a gorman-rupp company...
TRANSCRIPT
MagDrive_Product_Overview-0714 062614 Page 1
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
Contents• MagneticDrivePumpOverview....................................2
• Features,OEMOptions.................................................3
• SeriesComparisonChart..............................................4
• 14110Series.................................................................5
• 14520Series.................................................................7
• 15651Series.................................................................9
• 15700Series...............................................................11
• 17650Series...............................................................13
• 18650Series...............................................................15
• INTG1Series...............................................................17
• INTG3Series...............................................................19
MagneticDrivePumps
p r e s e n t sA GORMAN-RUPP COMPANY
Gorman-RuppIndustriesdesignsandmanufacturespumpsandpumpingsolutionsfortheOriginalEquipmentManufacturer(OEM).Allseries/modelsshowncanbeconfiguredtomeetspecificOEMapplicationrequirements.ContactGRIfordesignpointsthatfalloutsideofshownparameters.
MagDrive_Product_Overview-0714 062614 Page 2
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
Product Overview
Magnetic drive centrifugal pump operation is similar to a standard centrifugal pump except the motor shaft seal is eliminated. Magnetic drive pumps are designed to isolate the pump body from the motor by driving an impeller and magnet assembly with a drive magnet attached to the motor shaft. Motor torque is transmitted by a drive magnet through a plastic housing to the impeller assembly. The plastic housing separates the motor drive magnet from the fluid being pumped. Leaks caused by shaft seal failure are eliminated. The end result is a more efficient seal-less centrifugal pump that will not leak and is capable of achieving up to 50 thousand hours of continuous duty operation.
To handle the most aggressive chemicals, GRI’s material of construction consists of special combina-tions of chemically inert plastic. The impeller shaft and bearing system handle the inherent friction and motor heat with built-in cooling passages that are designed to use the pumped liquid as a lubricating coolant. GRI uses ceramic shafts with either Teflon® or ceramic thrust bearings as standard materials for each magnetic drive pump line. These robust features add tremendously to the chemical compat-ibility and overall life of the pump to make it virtually maintenance free.
Impellers and pump bodies are designed to produce efficient flow and head characteristics required in today’s applications. The hydraulic designs, coupled with motors specifically designed for the pump end, means less power consumption for the work performed.
Typical OEM applications include film processors, laser and x-ray cooling systems, medical, scien-tific, laboratory and silver recovery equipment. Magnetic drive centrifugal pumps must be used where flooded suction conditions exist.
Pump Specifications:Flow Rates: Range to 35 gpm (132 lpm)Max. Discharge Head: Range to 53 feet (16 m)Max. Fluid Temperature: Up to 250°F (121°C)Motors: All motors, except the 15651 series and 18650 series motors which use sleeve bearings, have sealed electric motor grade ball bearings, are thermally protected, class B insulated, and continuous duty rated. Most pumps available with AC or DC motors.
For proper selection of the wetted materials of construction (pump body, impeller, adapter disc, O-ring, impeller bearing) please visit GRI’s website to view Chemical Resistance Charts.
BODY
O-RING
FRONTTHRUSTBEARING
PUMPSHAFT
IMPELLER &MAGNET
ASSEMBLY
ADAPTER DISK
MAGNET & DRIVE HUB ASSEMBLY
MOTOR ADAPTER
MOTOR
GRI specializes in the custom design and manufacturing of fluid pumps for the OEM market. Please contact us to discuss your project’s needs and specifications.
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 3
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
Body• NSF certified models available• 3/8” MNPT
Thrust Bearings• Reinforced Thermoplastic Resin• Vectra®*
O-Rings (Elastomers)• Flurosilicone (14110 & 14518/20 Series only)• Kel-F®• Nitrile• Neoprene• Silicone• Viton®/Fluoroelastomer
Motors• 115V, 50/60 Hz• 115V/230V, 50/60 Hz Capacitor start, drip-proof,
ball bearing, thermally protected• 115V, 50/60Hz; 230, 50/60 Hz Explosion-proof
(14520 Series only)• 115V, 50/60 Hz; 230V, 50/60 Hz Open, shaded
pole• 115V, 50/60Hz; 230V, 50/60 Hz Open, shaded
pole, impedance protected, ball bearing• 230V, 50/60 Hz• Brush and brushless DC available• Drip-proof, shaded pole, thermally protected• TEFC/PSC, thermally protected
Features:• Corrosion resistant • Limited dry run capability• Hydraulically efficient• Quiet operation• No shaft seals
• Flexible mounting and body discharge positions• Low current draw and heat rise• NSF certified models available
OEM Options:GRI specializes in the custom design and manufacturing of fluid pumps for the OEM market. Please contact us to discuss your project’s needs and specifications.
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 4
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
MAXFLOW MAXHEADMAXSYSTEMPRESSURE
MAXFLUIDTEMPERATURE
MOTORSPECS/VOLTAGES
14110 11GPM 16FT 25PSI 180°F(82°C) •115,230,50/60Hz14520 26GPM 35FT 75PSI 203°F(95°C) •115,230,50/60Hz15651 3.75GPM 13FT 75PSI 203°F(95°C) •115,230,50/60Hz15700 35GPM 53FT 75PSI 203°F(95°C) •115,230,50/60Hz
17650 10.5GPM 57FT 75PSI 160°F(71°C)•115,230,50/60Hz•12,24DCBrushless
18650 12GPM 23FT 25PSI 180°F(82°C) •115,230,50/60HzINTG1 2GPM 11.5FT 75PSI 203°F(95°C) •12,24DCIntegratedBrushlessINTG3 7.93GPM 45FT 75PSI 203°F(95°C) •9-24DCIntegratedBrushless
Magnetic Drive Pumps Series Comparison Chart
This chart is just a general overview of the magnetic drive pumps offered. GRI specializes in the cus-tom design and manufacturing of fluid pumps for the OEM market. There are many variables that must be considered when specifying a pump for your application. At first glance you may not find a pump that meets your requirements. GRI recommends that you con-tact our Technical Sales Staff to discuss your project so that the right pump can be specified. Many times we will customize an existing pump to meet your needs or design a new pump from the ground up.
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 5
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
14110 Series MagneticDrivePump• Ask us about available OEM options
Specifications
FlowRates MaxRange:11gpm
MaxHead:16ft
MaxSys.Pressure:25psi
FluidTemp.Max 180°F(82°C)
Materials in contact with solution / OEM options
Body Ryton®
Impeller Ryton®withEpoxyadhesive
Adaptor Ryton®
PumpShaft Ceramic
ImpellerBearings ResinImpregnatedCarbon
FrontThrustBearings Glass-FilledTeflon®
RearThrustBearings Ceramic
O-Rings(Elastomers) •EPT/EPDM•Viton®/Fluoroelastomer•Nitrile•Neoprene•Silicone•Kel-F®
Motor specifications / OEM options
MotorSpecs •115V,50/60hz•230V,50/60hz•Vented•Shadedpole•Thermallyprotected•Tefc/psa
Features
CorrosionResistant Quietoperation
Hydraulicallyefficient Flexiblemountingandbodydischargepositions
Noshaftseals NSFcertifiedmodelsavailable
Lowcurrentdrawandheatrise
p r e s e n t sA GORMAN-RUPP COMPANY
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 6
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
2.50 (63.50)3.25 (82.55)
FLOW
1/2-14 N.P.T.(12.7 N.P.T.)
.99 (25.15)1.91 (48.51)
4.14 (105.16)
4.75(120.65)
7.62 (193.63)4.31 (109.47) 2.38 (60.45)
1.56(39.62)
2.25(57.15)
.281 X .656 (7.14 X 16.66) 4-SLOTS
3/4-14 N.P.T.(19.05 N.P.T.)
Dimensions in Inches(Dimensions in Millimeters)
14110 Series MagneticDrivePump• Ask us about available OEM options
p r e s e n t sA GORMAN-RUPP COMPANY
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 7
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
TOTA
L H
EA
D -
FE
ET
U.S. GALLONS PER MINUTE
LITERS PER MINUTE
TOTA
L H
EA
D -
ME
TE
RS
35
30
25
20
15
10
5
0
10.0
8.0
6.0
4.0
2.0
0
0 20 40 60 80 100
0 5 10 15 20 25 30
A - 60 Hz curve. B - 50 Hz curve.
A
C
B
14520 Series MagneticDrivePump• Ask us about available OEM options
Specifications
FlowRates MaxRange:26gpm
MaxHead:35ft
MaxSys.Pressure:75psi
FluidTemp.Max 203°F(95°C)
Materials in contact with solution / OEM options
Body Ryton®
Impeller Ryton®withEpoxyadhesive
Adaptor Ryton®
PumpShaft Ceramic
ImpellerBearings ResinImpregnatedCarbon
FrontThrustBearings Glass-FilledTeflon®
RearThrustBearings Ceramic
O-Rings(Elastomers) •EPT/EPDM•Viton®/Fluoroelastomer•Nitrile•Neoprene•Silicone•Kel-F®
Motor specifications / OEM options
MotorSpecs •115V,50/60hz•230V,50/60hz•Vented•Shadedpole•Thermallyprotected•Tefc/psa
Features
CorrosionResistant Quietoperation
Hydraulicallyefficient Flexiblemountingandbodydischargepositions
Noshaftseals NSFcertifiedmodelsavailable
Lowcurrentdrawandheatrise
p r e s e n t sA GORMAN-RUPP COMPANY
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 8
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
3/4" N.P.T.(19.05 N.P.T.)
1" N.P.T. (25.4 N.P.T.)
FLOW
2.74 (69.60)
2.50 (63.50)
2.25(57.15)
5.13(130.30)
4.21(106.93)
5.79 (147.07)3.48 (88.39) 1.09
(27.69)2.06 (52.32)
3.91 DIA.
(99.31)
6.39 (162.31)
10.06 (255.52)
2.38 (60.45)
.281 X .656 (7.14 X 16.66) 4-SLOTS
Dimensions in Inches(Dimensions in Millimeters)
14520 Series MagneticDrivePump• Ask us about available OEM options
p r e s e n t sA GORMAN-RUPP COMPANY
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 9
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
TOTA
L H
EA
D -
FE
ET
0 1 2
0
1.5
3.0
4.5
6.0
9.0
11.5
13.0
14.5
16.0
1.5
LITERS PER MINUTE
U.S. GALLONS PER MINUTE
TOTA
L H
EA
D -
ME
TE
RS
0 3 6 9 12 15
7.5
3 4 5 6
18 21
0
1.0
2.0
.5
2.5
3.0
3.5
4.0
4.5
B A
C
A - 60 Hz curve. B - 50 Hz curve. C - 12VDC curve. D - 12V BLDC curve.
D
15651 Series MagneticDrivePump• Ask us about available OEM options
Specifications
FlowRates MaxRange:3.75gpm
MaxHead:13ft
MaxSys.Pressure:75psi
FluidTemp.Max 203°F(95°C)
Materials in contact with solution / OEM options
Body Vectra®,Noryl®
Impeller Vectra®
Bearings Vectra®
PumpShaft Ceramic
ThrustBearings Glass-FilledTeflon®
O-Rings(Elastomers) •EPT/EPDM•Viton®/Fluoroelastomer•Nitrile•Neoprene•Silicone•Kel-F®
Motor specifications / OEM options
MotorSpecs •115V,50/60Hz•230V,50/60Hz•Open,•ShadedPole,• ImpedanceProtected,•SleeveBearing•12Vdc
Features
CorrosionResistant Quietoperation
Hydraulicallyefficient Flexiblemountingandbodydischargepositions
Noshaftseals NSFcertifiedmodelsavail-able
Lowcurrentdrawandheatrise
p r e s e n t sA GORMAN-RUPP COMPANY
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 10
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
.172 (4.37) DIA.-TYP. 2-PLC'S.
2.58 (65.53).52 (13.2)DIA.-TYP.
2.27 (57.66)2.52 (64.01)
3.08 (78.23)4.56 (115.82)
1.25(31.75)
1.25(31.75)
2.50(63.5)
3.00(76.2)
1.50(38.1)
3.06(77.72)
3.80(96.52)
.22(5.59) 1.05 (26.67)
2.38 (60.45)1.56
(39.62)
1.50(38.1)
3.00(76.2)
.52 (13.21)
.06(1.52)
.562 (14.27) DIA.-TYP.
.172 (4.37) DIA.-TYP. 2-PLC'S.
.375 (9.53)DIA.-TYP. 2-PLC'S.
.147 (3.73)DIA.-TYP. 2-PLC'S.
±.384.00 (101.6)15651 Series AC Models:
15651-05015651-05115651-05215651-05315651-05415651-05515651-05615651-057
Dimensions in Inches(Dimensions in Millimeters)
15651 Series DC Models:
15651-05815651-059
.060(1.52)
3.06(77.72)
2.58 (66.53)
1.05(26.67)
.52(13.21)
1.50(38.1)
1.25(31.75) 2.52 (64.01)
2.27 (57.66)
4.56 (115.82)3.08 (78.23)
.375 (9.53)TYP.
2-PLC'S.
1.25(31.75)
2.50(63.5)
3.00(76.2)
.147 (3.73) DIA.-TYP. 2-PLC'S.
1.50(38.1)
3.00(76.2)
TYP..562 DIA.(14.27)
TYP..52 DIA.(13.21)
1.58 DIA.(40.13)
1.50(38.1) .750
(19.05)
.172 (4.37) DIA.-TYP. 2-PLC'S..172 (4.37) DIA.-TYP. 2-PLC'S.
15651 Series MagneticDrivePump• Ask us about available OEM options
p r e s e n t sA GORMAN-RUPP COMPANY
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 11
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
TOTA
L H
EA
D -
FE
ET
0 10 20 30 40 50 60
0
20
30
40
60
70
20.0
LITERS PER MINUTE
U.S. GALLONS PER MINUTE
TOTA
L H
EA
D -
ME
TE
RS
0 40 80 120 160
0
4.0
8.0
12.0
16.0
10
50
200
A
A - 60 Hz curve.
15700 Series MagneticDrivePump• Ask us about available OEM optionsSpecifications
FlowRates MaxRange:35gpm
MaxHead:53ft
MaxSys.Pressure:75psi
FluidTemp.Max 203°F(95°C)
Materials in contact with solution / OEM options
Body Ryton®
Impeller Ryton®
ImpellerBearings ResinImpregnatedCarbon
PumpShaft Ceramic
ThrustBearings Ceramic
O-Rings(Elastomers) •EPT/EPDM•Viton®/Fluoroelastomer•Nitrile•Neoprene•Silicone•Kel-F®
Motor specifications / OEM options
Volts 115/230
Hz 50/60
Amps 6.4/3.2
Motortype •CapacitorStart•BallBearing•ThermallyProtected
Shell OpenDripProof
Approx.weight 18.3lbs
Features
CorrosionResistant Quietoperation
Hydraulicallyefficient Flexiblemountingandbodydischargepositions
Noshaftseals NSFcertifiedmodelsavail-able
Lowcurrentdrawandheatrise
p r e s e n t sA GORMAN-RUPP COMPANY
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 12
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
2.06 (52.30)
5.50 DIA.
(139.70)
5.70(144.78)
2.75 (69.85) 8.61 (218.69)
15.81 (401.57)
2.81 (71.37)
5.62 (142.75)
2.95(74.93)
6.70(170.18)
3.59 (91.19)4.91 (124.71)
FLOW
1-111/2 N.P.T.
2.09 (53.09)
1-11 1/2 N.P.T.Dimensions in Inches(Dimensions in Millimeters)
15700 Series MagneticDrivePump• Ask us about available OEM options
p r e s e n t sA GORMAN-RUPP COMPANY
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 13
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
TOTA
L H
EA
D -
FE
ET
0 1 2
0
3
6
9
18
21
24
27
30
33
36
39
42
45
48
51
3.0
LITERS PER MINUTE
U.S. GALLONS PER MINUTE
TOTA
L H
EA
D -
ME
TE
RS
0 4 8 12 16 20
0
1.0
2.0
15
3 4 5 6
12
4.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
A - 60 Hz curve. B - 50 Hz curve. C - 12VDC curve. D - 12V BLDC curve. E - 12V & 24V BLDC curve. F - 24V BLDC curve. G - 12VDC curve.
D
A
B
C
E
F
G
17650 Series MagneticDrivePump• Ask us about available OEM options
Specifications
FlowRates MaxRange:10.5gpm
MaxHead:57ft
MaxSys.Pressure:75psi
FluidTemp.Max 160°F(71°C)
Materials in contact with solution / OEM options
BodyandHousing •Vectra®*•Noryl®•NSFcertifiedmodelsavailable•3/8”MNPT
Impeller Vectra®
Bearings Vectra®
PumpShaft Ceramic
ThrustBearings •Glass-FilledTeflon®•ReinforcedThermoplasticResin•Vectra®
O-Rings(Elastomers) •EPT/EPDM•Viton®/Fluoroelastomer•Nitrile•Neoprene•Silicone•Kel-F®
Motor specifications / OEM options
MotorSpecs •115V,50/60Hz•230V,50/60Hz•Drip-Proof•ShadedPole•12VdcBrushed-Type&brushless•24VdcBrushed-Type&brushless
Features
CorrosionResistant Quietoperation
Hydraulicallyefficient Flexiblemountingandbodydischargepositions
Noshaftseals NSFcertifiedmodelsavailable
Lowcurrentdrawandheatrise
p r e s e n t sA GORMAN-RUPP COMPANY
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 14
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
(304.80)12.00
(STD. LEADLENGTH)
WHITEGR/YEL
BLACK3.50 (88.90)2.875 (73.02)2.375 (60.32)
3.32 DIA. (84.33)
.562 (14.27) DIA. TYP.
.531 (13.49) DIA. TYP..750 (19.05) .39 I.D.
(9.91)TYP.
.25(6.35)TYP.
2.42 (61.47)2.84 (72.14)2.375 (60.32).234
(5.94)
.265 (6.73)
5.97 (151.64) "O.A." DUAL FREQ. (FAN COOLED)2.266 (57.55)
.969(24.61)
.50(12.70)
17650 Series AC Models:
17651-05017651-05117651-05217651-05317651-05417651-05517651-05617651-057
Dimensions in Inches(Dimensions in Millimeters)
17650 Series DC Models:
17651-05817651-059
3.250(82.55)
1.750(44.45)
1.50(38.61)
.66 (16.76)TYP.
.750 (19.05)
.562 (14.27) DIA. TYP.
.531 (13.49) DIA. TYP.
.39 I.D. (9.91) TYP.
4.974 (126.34)2.454 (62.33)
1.950 (49.53)1.781 (45.24)
1.246 (31.65)
2.822(71.68)
1.411(35.84)
2.360(59.94)
1.180(29.97)
.215 (5.46)TYP. 2-PLC'S
1.532(38.91).060 (1.52) TYP.
.750 (19.05)
17650 Series MagneticDrivePump• Ask us about available OEM options
p r e s e n t sA GORMAN-RUPP COMPANY
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 15
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
TOTA
L H
EA
D -
FE
ET
0 2 4 6 8 10 12
0
5
10
20
25
7.0
LITERS PER MINUTE
U.S. GALLONS PER MINUTE
TOTA
L H
EA
D -
ME
TE
RS
0 6 12 18 36
0
2.0
4.0
6.0
15
24 30 42
5.0
3.0
1.0
A - 230v 60 Hz B - 230v 50 Hz C - 115v 60 Hz
ABC
18650 Series MagneticDrivePump • Ask us about available OEM options
Specifications
FlowRates MaxRange:12gpm
MaxHead:23ft
MaxSys.Pressure:25psi
FluidTemp.Max 180°F(82°C)
Materials in contact with solution / OEM options
BodyandHousing PPR
Impeller PPS
PumpShaft Ceramic
ThrustBearings Ceramic
O-Rings(Elastomers) •EPT/EPDM•Viton®/Fluoroelastomer•Nitrile•Neoprene•Silicone•Kel-F®
Motor specifications / OEM options
MotorSpecs •115V,50/60Hz•TEFC/PSC•Thermallyprotected
Features
CorrosionResistant Quietoperation
Hydraulicallyefficient Flexiblemountingandbodydischargepositions
Noshaftseals NSFcertifiedmodelsavailable
Lowcurrentdrawandheatrise
p r e s e n t sA GORMAN-RUPP COMPANY
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 16
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
MOUNTING SLOTS(4) .281 X .656 LG.
(7.14 X 16.66)
2.88 (73.15)
3.81 (96.77)
1.14(28.96)
4.69(119.13)
2.25(57.15)
3/4-14 NPT
3.90(99.06)
DIA.
9.07 (230.38)
1/2-14 NPT
1.18(29.97)
2.38 (60.45) 4.56 (115.82)
3 FT. LONGSPT CORD
18650 Series (115V) Models:18650-05018650-051
Dimensions in Inches(Dimensions in Millimeters)
18650 Series (230V) Models:18650-05218650-053
3 FT. LONGSPT CORD
3/4-14 NPT
1.18(29.97)
1/2-14 NPT
3.90(99.06)
DIA.
4.69(119.13)
MOUNTING SLOTS(4) .281 X .656 LG.
(7.14 X 16.66)
2.25(57.15)
1.14(28.96)
2.38 (60.45) 2.88 (73.15)
3.81 (96.77)
4.86(123.44)
9.09 (230.89)
3.45 (87.63)
18650 Series MagneticDrivePump • Ask us about available OEM options
p r e s e n t sA GORMAN-RUPP COMPANY
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 17180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • [email protected] • www.GRIpumps.com
Materials in contact with solutionBody:PPS(Ryton®) Housing:PPS(Ryton®)
Impeller:PPS(Ryton®) Rotor Shell:PPS(Ryton®)
Impeller Shaft:Ceramic Static O-Ring:EPDM,FKM
Bearing Plate:PPS(Ryton®)
FeaturesLightweightdesign Impellerassemblyonlymovingpart
Nomotorbearings Lowpowerconsumption
Quietoperation Longlife
Submersibleoption MultipleOEMoptions
Motor specificationsSupply Voltage • Motor Speed Control•12vBLDC•24vBLDCw/0-5vthirdwirespeedcontrol(optional)Inrush Current:None.•Rampsuptorunningcurrent.Submersibleoptionavailable
SpecificationsMax. Fluid Temp:203°F(95°C) Weight:10oz(283.5grams)
Max Sys. Pressure:75psi Connector:1/2”MHB,3/8”MPT
Max Flow: 2GPM Max Head: 11.5feet
Dimensions:2.57”Wx3.29”Hx3.42”L
INTG1 Series SpecSheet
p r e s e n t sA GORMAN-RUPP COMPANY
Note:Testingperformedinacontrolledlaboratoryenvironment.Actualperformancemayvary(+)or(-)10%fromtheinformationshownonthisspecsheet.
Flow (GPM)
Flow (LPM)
Total Head (Ft)
Total Head (PSI)
Total Head (M) Watts Volts Amps
2.23 8.44 4.62 2.00 1.41 19.62 12.00 1.63
1.96 7.40 5.39 2.34 1.64 19.32 12.00 1.61
1.83 6.92 5.95 2.58 1.81 19.11 12.00 1.59
1.62 6.13 6.33 2.75 1.93 18.87 12.00 1.57
1.42 5.38 6.89 2.99 2.10 18.70 12.00 1.56
1.18 4.46 7.71 3.34 2.35 18.44 12.00 1.54
1.00 3.78 8.31 3.60 2.53 18.17 12.00 1.51
0.81 3.06 8.86 3.84 2.70 17.92 12.00 1.49
0.75 2.82 9.02 3.91 2.75 17.82 12.00 1.48
0.00 0.00 11.52 5.00 3.51 16.99 12.00 1.42
0.00
2.00
4.00
6.00
8.00
10.00
12.00
0.00 0.50 1.00 1.50 2.00 2.50
TOTA
L H
EAD
(Fee
t of W
ater
)
0.87
1.73
2.60
3.47
4.34
5.20
TOTA
L H
EAD
(PSI
)
CAPACITY (GPM)
1.89 3.79 5.68 7.57 9.46
CAPACITY (LPM)
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 18180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • [email protected] • www.GRIpumps.com
General SpecificationsMaxFluidTemp 203°F(95°C)MaxSystemPressure 75PSIWeight 10oz(283.5grams)
Wetted MaterialsPumpBody PPS(Ryton®)Housing PPS(Ryton®)Impeller PPS(Ryton®)RotorShell PPS(Ryton®)StaticO-Ring EPDM,FKMPumpShaft CeramicBearingPlate PPS(Ryton®)
.39 (9.9)
.531 (13.49)
.562 (14.27)
.75
1.54(39.1)
.66(16.8)
3.29(86.1)
.25(6.4)
2.49
3.42
.25 (6.4)TYP.
.96
MOD
ECU
ST.
DO N
18.00(457.2)
TYP.
+2.00-0.00
.25(6.4 )
±.06
BLACK (-)
RED (+)
450
3D VIEW
(65.3)
(19.1)
DIA. TYP.
DIA. TYP.
DIA. TYP.
(24.4)
(63.2)
(86.9)
TYP.±1.5
+50.8-0.0
2.57
p r e s e n t sA GORMAN-RUPP COMPANY
INTG1 Series SpecSheet
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 19
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
INTG3 SpecSheet
The above curve is an all inclusive overview of the INTG3 Series cata-log models represented on this tech sheet. Gorman-Rupp Industries designs and manufactures pumps and pumping solutions for the Origi-nal Equipment Manufacturer (OEM). All models shown can be config-ured to meet specific OEM application requirements. Contact GRI for design points that fall outside of shown parameters.
Note: Testing performed in a controlled laboratory environment. Actual performance may vary (+) or (-) 10% from the information shown.
p r e s e n t sA GORMAN-RUPP COMPANY
Materials in contact with solutionBody:PPS(Ryton®)
Impeller:PPS(Ryton®)
Pump Shaft:Ceramic
Bearing Plate:PPS(Ryton®)
Housing:PPS(Ryton®)
Rotor Shell:PPS(Ryton®)
Static O-Ring:EPDM,FKM(Viton)
Mounting BaseVariable360°rotation
Motor specifications / OEM OptionsSupply Voltage:9-24VDC Reverse Polarity Protection:No
Over Current Protection:No Thermal Overload:No
Inrush Current:None.• Rampsuptorunningcurrent.
High Current Limit:No
Locked Rotor Current Limit:No
Electronics Max Power:60watts.
Remote Speed Control (Optional - Consult Factory)• ThirdWire• 0-5volts(ReferenceDCNEG).Speediscontrolledbyanominal0-5
voltDCsignal.
FLOW RATES: H2O / 9-24 VDC SUPPLY VOLTAGE
MaxFlow:7.93GPM,30.01LPM
MaxHead:45.00FT,19.50PSI
Flowandpressuredependentoninputvoltage
SpecificationsMax. Fluid Temp:203°F(95°C)
Max Sys. Pressure:75psi
Weight:12.8oz(362.9grams)
Connector:1/2”,3/4”MHB,3/8”MPT
0
5
10
15
20
25
30
35
40
45
50
2.16
4.33
6.50
8.67
10.83
13.00
15.17
17.34
19.50
21.67
0 1 2 3 4 5 6 7 8
TOTA
L H
EAD
(fee
t of w
ater
)
TOTA
L H
EAD
(PSI
)
CAPACITY (GPM)
0 3.78 7.57 11.35 15.14 18.92 22.71 26.49 30.28CAPACITY (LPM)
Back to Front Cover
MagDrive_Product_Overview-0714 062614 Page 20
180 Hines Ave. • Bellville, OH 44813 • PH: 419-886-3001 • FAX: 419-886-2338 • www.GRIpumps.com
INTG3 SpecSheet
Model Voltage Max Amps @Max Flow
Max FlowGPM (LPM)
Max HeadFeet (PSI)
ConnectionsInlet/Outlet
(Inches)O-Ring Material
INTG3-550 9-24VDC 2.13 7.27(27.51) 35.67(15.46) 3/4MHB EPDM
INTG3-551 9-24VDC 2.13 7.27(27.51) 35.67(15.46) 3/4MHB FKM
INTG3-552 24VDC,0-5vcontroller 2.13 7.27(27.51) 35.67(15.46) 3/4MHB EPDM
INTG3-553 24VDC,0-5vcontroller 2.13 7.27(27.51) 35.67(15.46) 3/4MHB FKM
INTG3-560 9-24VDC 2.27 4.91(18.58) 37.61(16.30) 1/2MHB EPDM
INTG3-561 9-24VDC 2.27 4.91(18.58) 37.61(16.30) 1/2MHB FKM
INTG3-562 24VDC,0-5vcontroller 2.27 4.91(18.58) 37.61(16.30) 1/2MHB EPDM
INTG3-563 24VDC,0-5vcontroller 2.27 4.91(18.58) 37.61(16.30) 1/2MHB FKM
INTG3-564 9-24VDC 2.27 4.91(18.58) 37.61(16.30) 3/8MPT EPDM
INTG3-565 9-24VDC 2.27 4.91(18.58) 37.61(16.30) 3/8MPT FKM
INTG3-566 24VDC,0-5vcontroller 2.27 4.91(18.58) 37.61(16.30) 3/8MPT EPDM
INTG3-567 24VDC,0-5vcontroller 2.27 4.91(18.58) 37.61(16.30) 3/8MPT FKM
INTG3-570 9-24VDC 2.63 6.56(24.83) 52.94(22.95) 1/2MHB EPDM
INTG3-571 9-24VDC 2.63 6.56(24.83) 52.94(22.95) 1/2MHB FKM
INTG3-572 24VDC,0-5vcontroller 2.63 6.56(24.83) 52.94(22.95) 1/2MHB EPDM
INTG3-573 24VDC,0-5vcontroller 2.63 6.56(24.83) 52.94(22.95) 1/2MHB FKM
INTG3-574 9-24VDC 2.63 6.56(24.83) 52.94(22.95) 3/8MPT EPDM
INTG3-575 9-24VDC 2.63 6.56(24.83) 52.94(22.95) 3/8MPT FKM
INTG3-576 24VDC,0-5vcontroller 2.63 6.56(24.83) 52.94(22.95) 3/8MPT EPDM
INTG3-577 24VDC,0-5vcontroller 2.63 6.56(24.83) 52.94(22.95) 3/8MPT FKM
•ElectronicsMaximumpower=60Watts.•0-5vControllerrequiresthirdwireondriver.•Testingperformedinacontrolledlaboratoryenvironment.Actualperformancemayvary(+)or(-)10%fromtheinformationshown.
p r e s e n t sA GORMAN-RUPP COMPANY
DrawingrepresentsmodelINTG3-550with3/4”MHBconnectorsand2wiredriver.
Back to Front Cover