magival valve supplier distributor - global supply line · 2020. 9. 28. · trunnion ball valves mg...
TRANSCRIPT
indexTrunnion ball valves- Trunnion ball valves mg 1000
Double bloCK anD bleeD valves- Trunnion Double bloCK anD bleeD valves mg 2500
- Double bloCK anD bleeD valves mg 2000
spliT boDy ball valves- spliT boDy ball valves - full bore
- spliT boDy ball valves - reduced bore
wafer ball valves- wafer ball valves mg20
- wafer THree way ball valve mg22
monobloCK valves- monobloCK THreaDeD ball valve mg30
- monobloCK soCKeT welD ball valve mg60
- monobloCK buTT welD ball valve wiTH pre-welDeD nipples mg50
- monobloCK buTT welD ball valve wiTH inTegral nipples mg50i
- monobloCK THree way ball valve mg40
- monobloCK THree pieCes ball valve mg24
neeDle valves- neeDle valves f/f mg300
- neeDle valves m/f pressure gau ge mg350|360|370
CheCK valves mg100qualiTy anD TesT
05
09
11
15
17
21
23
27
29
31
33
35
37
41
43
45
47
Global Supply Line Australia major Magival distributor & stockist, supplying world wide. www.globalsupplyline.com.au
Contact us: [email protected]
Trunnion BallValVes
ref
1 boDy asTm a105/asTm a350 lf2 asTm a105 aisi a182 f316
17 seaT seal viTon viTon viTon
9 sTem bearing aisi a182 f316 + pTfe aisi a182 f316 + pTfe aisi a182 f316 + pTfe
25 boDy gasKeT grapHiTe grapHiTe grapHiTe
5 seaT/inserT asTm a350 lf2 + enp/Devlon aisi a182 f316/Devlon aisi a182 f316/Devlon
21 nuT asTm a194 2H asTm a194 2H asTm a194 gr.8
13 sTem-Key Carbon sTeel Carbon sTeel Carbon sTeel
29 seaT spring inConel X750 inConel X750 inConel X750
3 ball asTm a350 lf2 + enp aisi a182 f316 aisi a182 f316
19 glanD plaTe seal viTon viTon viTon
11 bearing reTainer aisi a182 f316 + pTfe aisi a182 f316 + pTfe aisi a182 f316 + pTfe
27 sTem gasKeT grapHiTe grapHiTe grapHiTe
7 bearing reTainer fe 510b uni 7070 fe 510b uni 7070 fe 510b uni 7070
23 sTem inJeCTor asTm a105 galvaniZeD asTm a105 galvaniZeD aisi a182 f316
15 lifTing-lug fe 360 fe 360 fe 360
31 nuT asTm a194 2H asTm a194 2H asTm a194 gr.8
33 pin Carbon sTeel Carbon sTeel Carbon sTeel
2 Closure asTm a105/asTm a350 lf2 asTm a105 aisi a182 f316
18 sTem seal viTon viTon viTon
10 bearing reTainer aisi a182 f316 + pTfe aisi a182 f316 + pTfe aisi a182 f316 + pTfe
26 seaT gasKeT grapHiTe grapHiTe grapHiTe
6 glanD plaTe asTm a105 asTm a105 aisi a182 f316
22 Cap sCrew 8.8 8.8 8.8
14 supporT leg fe 360 fe 360 fe 360
30 sTuD asTm a193 b7 asTm a193 b7 asTm a193 b8
4 sTem aisi 4140 + enp aisi a182 f316 aisi a182 f316
20 sTuD asTm a193 b7 asTm a193 b7 asTm a193 b
12 bearing reTainer aisi a182 f316 + pTfe aisi a182 f316 + pTfe aisi a182 f316 + pTfe
28 glanD plaTe gasKeT grapHiTe grapHiTe grapHiTe
8 aDapTer plaTe asTm a105 asTm a105 aisi a182 f316
24 Drain plug asTm a105 galvaniZeD asTm a105 galvaniZeD aisi a182 f316
16 boDy seal viTon viTon viTon
32 venT plug asTm a105 galvaniZeD asTm a105 galvaniZeD aisi a182 f316
34 gear operaTor
description material material material
- antiblowout stem- operating temperature -29°C+200°C for lf2 (-46°C+200°C)
- antistatic device- painted with our ral 7031- iso 5211 top work drilling- with lever
- rTJ and bw ends- bare stem- locking device- seat in different material- as per customer specification
Trunnion BallValVes MG 1000
ball valves “Trunnion” barstock construction in according to:
- peD 97/23/Ce - api 6D - api 598- asme 16.34 iso 14313- ansi b 16.10 – en 558-1- ansi b 16.5 en 1092-1
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
12
3
4
6
7
8
9
10
1112
13
15
14
16 17
18
19
2021
22
23
24
25
26
27
28
29
30
31
33
34
32
5
Full and reduced Bore
Certifications
Standard features:
Upon request:
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
05
douBle BloCK and BleedValVes
antistatic device
sTanDarD feaTures
parTiCular Trunnion ball valves
opTions
vent bleeder npt thread – ½ - ¾-1
locking device
seat grease injector
stem grease sealant injector
Drain plug on all valves
bare stem
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- rTJ ends- THD x THD- THD x flg- iso 5211 top work drilling
- locking device- lever extension- bare stem- as per customer specification
Full and reduced Bore
Standard features:
Upon request:
Trunnion douBle BloCK and Bleed ValVes MG 2500
09
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
ref
1 boDy asTm a105 asTm a350 lf2 aisi a182 f316
17 sTuD asTm a193 b7 asTm a193 b7 asTm a193 b7
9 sTem bearing aisi 316 + pTfe aisi 316 + pTfe aisi 316 + pTfe
25 glanD plaTe gasKeT grapHiTe grapHiTe grapHiTe
5 seaT/inserT aisi a182 f316/Devlon aisi a182 f316/Devlon aisi a182 f316/Devlon
21 plug asTm a105 asTm a105 asTm a105
13 boDy seal viTon viTon viTon
29 nuT Cs galvaniZeD Cs galvaniZeD Cs galvaniZeD
3 ball aisi a182 f316 aisi a182 f316 aisi a182 f316
19 CapsCrew 8.8 8.8 8.8
11 ball bearing aisi 316 + pTfe aisi 316 + pTfe aisi 316 + pTfe
27 lever Cs galvaniZeD Cs galvaniZeD Cs galvaniZeD
7 bearing reTainer fe 510b uni 7070 fe 510b uni 7070 fe 510b uni 7070
23 seaT gasKeT grapHiTe grapHiTe grapHiTe
15 sTem seal viTon viTon viTon
2 Closure asTm a105 asTm a350 lf2 aisi a182 f316
18 nuT asTm a194 2H asTm a194 2H asTm a194 2H
10 ball bearing aisi 316 + pTfe aisi 316 + pTfe aisi 316 + pTfe
26 spring inConel X718 inConel X718 inConel X718
6 glanD plaTe asTm a105 asTm a105 aisi a182 f316
22 boDy gasKeT grapHiTe grapHiTe grapHiTe
14 seaT seal viTon viTon viTon
30 pin Carbon sTeel Carbon sTeel Carbon sTeel
4 sTem aisi a182 f316 aisi a182 f316 aisi a182 f316
20 sTem inJeCTor asTm a105 asTm a105 asTm a105
12 sTem bearing aisi 316 + pTfe aisi 316 + pTfe aisi 316 + pTfe
28 sTop Cs galvaniZeD Cs galvaniZeD Cs galvaniZeD
8 aDapTer plaTe asTm a105 asTm a105 aisi a182 f316
24 sTem gasKeT grapHiTe grapHiTe grapHiTe
16 glanD plaTe seal viTon viTon viTon
description material material material
ball valves “Trunnion Double bloCK anD bleeD” bar stock construction in according to:
- peD 97/23/Ce - api 6D - api 598- asme 16.34 iso 14313- ansi b 16.10 – en 558-1- ansi b 16.5 en 1092-1
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
Certifications
12
3
4 5
6
7
8
9
10
11
12
13
14
1516
1718
19
20
21 22
23
2425
26
272829
30
ref description material material material
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- rTJ ends- THD x THD- THD x flg- iso 5211 top work drilling
- locking device- lever extension- as per customer specification- bare stem
Full and reduced Bore
Standard features:
Upon request:
1 boDy asTm a105 asTm a350 lf2 aisi a182 f316
17 neeDle sTem aisi a182 f316 aisi a182 f316 aisi a182 f316
9 pressing busH asTm a105 galvaniZeD asTm a350 lf2 galvaniZeD asTm a105 galvaniZeD
5 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
21 paCKing pTfe pTfe pTfe
13 spring C.72 galvaniZeD C.72 galvaniZeD C.72 galvaniZeD
3 ball aisi a182 f316 aisi a182 f316 aisi a182 f316
19 HeaDworK asTm a105 asTm a350 lf2 aisi a182 f316
11 o-ring viTon viTon viTon
7 seaT rpTfe/Delrin* rpTfe/Delrin* rpTfe/Delrin*
23 T-bar asTm a105 galvaniZeD asTm a350 lf2 galvaniZeD aisi a182 f316
15 bolTs asTm a193 b7 asTm a320 l7 asTm a193 b7
2 Closure asTm a105 asTm a350 lf2 aisi a182 f316
18 gasKeTs KlingeriTe KlingeriTe KlingeriTe
10 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
6 nuTs gr.6s galvaniZeD gr.6s galvaniZeD gr.6s galvaniZeD
22 glanD asTm a105 asTm a350 lf2 aisi a182 f316
14 sTem gasKeTs rpTfe rpTfe rpTfe
4 sTem aisi a182 f316 aisi a182 f316 aisi a182 f316
20 Cover asTm a105 asTm a350 lf2 aisi a182 f316
12 gasKeT grapHiTe grapHiTe grapHiTe
8 lever galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
16 moving sTopper aisi a182 f316 aisi a182 f316 aisi a182 f316
douBle BloCK and BleedValVes MG 2000
11
1 234
5
6
78
9
1011
12
13
14
15
16
17
18
19
25
21 22
23
24 20
26
27
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
ball valves “Double bloCK anD bleeD”bar stock construction in according to:
- peD 97/23/Ce - api 6D - api 598- asme 16.34 iso 14313- ansi b 16.10 – en 558-1- ansi b 16.5 en 1092-1
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
Certifications
spliT BodyBall ValVes
antistatic device bare stem
sTanDarD feaTures
parTiCular Double bloCK anD bleeD valves
opTions
locking device extended stem
full bore
reduced bore
iso 5211 - Top Drilling worKextended stem and locking device
size
size
1/2”
1/2”
3/4”
3/4”
1”
1”
1. 1/4”
1. 1/4”
1. 1/2”
1. 1/2”
2”
2”
2. 1/2”
2. 1/2”
3”
3”
4”
4”
5”
5”
6”
6”
8”
8”
f 03
f 03
iso 5211
iso 5211
f 03
f 03
f 04
f 04
f 07
f 05
f 07
f 07
f 03
f 03
f 04
f 03
f 05
f 04
f 07
f 05
f 10
f 07
f 10
f 07
f 14
f 10
ref
size size
size
PN 1
6/40
ANSI
300
ANSI
900
/150
0AN
SI 1
50
ANSI
600
ANSI
250
0
description
15 15
15
1/2” 1/2”
1/2”
32 32
32
65 65
65
20 20
20
3/4” 3/4”
3/4”
1” 1”
1”
1 1/4” 1 1/4”
1 1/4”
1 1/2” 1 1/2”
1 1/2”
2” 2”
2”
2 1/2” 2 1/2”
2 1/2”
3” 3”
3”
4” 4”
4”
5” 5”
5”
6” 6”
6”
40 40
40
80 80
80
25 25
25
50 50
50
100 100
100
125 125
125
material material material
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- painted with our ral 7031- iso 5211 top work drilling- iso 3202 face to face
- rTJ ends- special face to face dimension- seat and seal in different materials- locking device- lever extension- metal to metal valves- as per customer specification
Full Bore
Standard features:
Upon request:
1 boDy asTm a105 asTm a182 f316l asTm a350 lf2
9 pressing busH asTm a105 galvaniZeD asTm a105 galvaniZeD a350 lf2 galvaniZeD
5 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
13 spring C.72 galvaniZeD C.72 galvaniZeD C.72 galvaniZeD
115l 125 140 170 190120 130 150 180 325 350 140l 165 190 241 305152 178 216 282 381 403
216l 254 305229 368
108l 127 165 190 229117 140 178 203 254 267165l 216 241 330 432190 229 292 355
273l 356 384308
150a 185 285 380 460185 285 285 380 460 460150a 185 285 380 460185 285 285 380 460 gear
150a 185 285185 380
88r 107 127 177 22898 117 152 190 254 27995r 123 155 190 273117 133 165 209
133r 158 203139
95r 123 155 190 254117 133 165 209 279 317
120r 149 177130 215
75H 90 105 150 18590 100 115 160 200 22575H 90 105 150 18590 100 115 160
75H 90 13090
14D 25 38 65 9420 32 48 75 119 145 14D 25 38 65 9420 32 48 75 119 145
14D 25 3820 48
14D 25 38 65 9420 32 48 75 119 14514D 25 38 65 9420 32 48 75
14D 25 3820
75H 90 105 150 18590 100 115 160 200 22575H 90 105 150 18590 100 115 160 200 258
75H 120 105105 115
150a 185 285 380 460185 285 285 380 460 460150a 185 285 380 590185 285 285 380
150a 185 285185
3 ball asTm a182 f316l asTm a182 f316l asTm a182 f316l
11 o-ring viTon viTon viTon
7 seaTs rpTfe/Delrin* rpTfe/Delrin* rpTfe/Delrin*
15 bolTs 8.8 galvaniZeD * 8.8 galvaniZeD * asTm a320 l7
2 Closure asTm a105 asTm a182 f316l asTm a350 lf2
10 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
6 nuTs gr.6s galvaniZeD gr.6s galvaniZeD gr.6s galvaniZeD
14 sTem gasKeTs rpTfe rpTfe rpTfe
4 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
12 gasKeT grapHiTe grapHiTe grapHiTe
8 lever galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
ball valves “spliT boDy” barstock construction in according to:
- peD 97/23/Ce - api 6D - api 598- asme 16.34 iso 14313- ansi b 16.10 – en 558-1- ansi b 16.5 en 1092-1
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
Certifications
spliT BodyBall ValVes
ØR
A
H
L
ØD
12
3
4
5
7
86
9
10
11
12
13
14
15
150 150
150
* from #150 To #600 (rpTfe)from #900 To #2500 (Derlin)
* from #300 To #2500 (a193 b7)
15
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
ref
size
PN 1
6/40
ANSI
150
description
151/2”
32 65203/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6” 8”
40 8025 50 100 125
material material material
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- painted with our ral 7031- iso 5211 top work drilling- iso 3202 face to face
- rTJ ends- special face to face dimension- seat and seal in different materials- locking device- lever extension- metal to metal valves- as per customer specification
reduced Bore
Standard features:
Upon request:
1 boDy asTm a105 asTm a182 f316l asTm a350 lf2
9 pressing busH asTm a105 galvaniZeD asTm a105 galvaniZeD a350 lf2 galvaniZeD
5 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
13 spring C.72 galvaniZeD C.72 galvaniZeD C.72 galvaniZeD
120l 125 140 170 190120 130 150 180
117l 127 165 190 229117 140 178 203 254 267
150a 185 285 285 380150 185 285 285
98r 107 127 177 22898 117 152 190 254 279
90H 90 105 105 20790 100 105 120 200 220
20D1 25 40 65 10020 32 50 8014D 20 32 48 7514 25 38 48
20D1 25 40 65 10020 32 50 80 125 15014D 20 32 48 7514 25 38 48 94 94
90H 90 105 105 20790 100 105 120
150a 185 285 285 380150 185 285 285 460 590
3 ball asTm a182 f316l asTm a182 f316l asTm a182 f316l
11 o-ring viTon viTon viTon
7 seaTs rpTfe/Delrin* rpTfe/Delrin* rpTfe/Delrin*
15 bolTs 8.8 galvaniZeD * 8.8 galvaniZeD * asTm a320 l7
2 Closure asTm a105 asTm a182 f316l asTm a350 lf2
10 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
6 nuTs gr.6s galvaniZeD gr.6s galvaniZeD gr.6s galvaniZeD
14 sTem gasKeTs rpTfe rpTfe rpTfe
4 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
12 gasKeT grapHiTe grapHiTe grapHiTe
8 lever galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
ball valves “spliT boDy” barstock construction in according to:
- peD 97/23/Ce - api 6D - api 598- asme 16.34 iso 14313- ansi b 16.10 – en 558-1- ansi b 16.5 en 1092-1
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
Certifications
spliT BodyBall ValVes
150 200 * from #150 To #600 (rpTfe)from #900 To #2500 (Derlin)
* from #300 To #2500 (a193 b7)
size
ANSI
300
ANSI
600
151/2”
32 65203/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6”
40 8025 50 100 125
152l 165 190 241 305152 178 216 282 381 403
190l 216 241 330 432190 229 292 355 502 559
150a 185 285 285 380150 185 285 285 460 590
117r 123 155 190 273117 133 165 209 330 335
117r 123 155 190 254117 133 165 209 279 317
90H 90 105 105 20790 100 105 120 220 220
14D 20 32 48 7514 25 38 48 94 9420D1 25 40 65 10020 32 50 80 125 150
14D 20 32 48 7514 25 38 48 94 94
90H 90 105 105 20790 100 105 120 220 220
20D1 25 40 65 10020 32 50 80 125 150
150a 185 285 285 380150 185 285 285 460 590
150size
ANSI
900
/150
0AN
SI 2
500
151/2”
32 65203/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6”
40 8025 50 100 125
229l 254 305229 368
308l 356 384308 451
150a 185 285150 285
139r 158 203139 234
130r 149 177130 215
90H 90 13090 130
14D 20 3214 3820D1 25 4020 50
14D 20 3214 38
90H 90 13090 112
20D1 25 4020 50
150a 185 285150 285
150
200
590
292
342144
225
17Ø
R
A
H
L
ØD
12
3
4
5
7
86
9
10
11
12
13
14
15
ØD
1
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
waFer BallValVes
antistatic device bare stem
sTanDarD feaTures
parTiCular spliT boDy ball valves
opTions
locking device
extended stem
full bore
reduced bore
iso 5211 - Top Drilling worK
extended stem and locking device
gear operator
size
size
1/2”
1/2”
3/4”
3/4”
1”
1”
1. 1/4”
1. 1/4”
1. 1/2”
1. 1/2”
2”
2”
2. 1/2”
2. 1/2”
3”
3”
4”
4”
5”
5”
6”
6”
8”
f 03
f 03
iso 5211
iso 5211
f 03
f 03
f 04
f 04
f 07
f 05
f 07
f 07
f 03
f 03
f 04
f 03
f 05
f 04
f 07
f 05
f 10
f 07
f 10
f 07
f 14
8”
f 10
ref description material material material
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- painted with our ral 7031- iso 5211 top work drilling
- locking device- lever extension- bare stem- as per customer specification
Full Bore
Standard features:
Upon request:
1 boDy asTm a105 asTm a182 f316l asTm a350 lf2
9 pressing busH asTm a105 galvaniZeD asTm a105 galvaniZeD a350 lf2 galvaniZeD
5 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
12 spring C.72 galvaniZeD C.72 galvaniZeD C.72 galvaniZeD
3 ball asTm a182 f316l asTm a182 f316l asTm a182 f316l
11 o-ring viTon viTon viTon
7 seaTs rpTfe/Delrin rpTfe/Delrin rpTfe/Delrin
2 Closure asTm a105 asTm a182 f316l asTm a350 lf2
10 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
6 nuTs gr.6s galvaniZeD gr.6s galvaniZeD gr.6s galvaniZeD
13 sTem gasKeTs rpTfe rpTfe rpTfe
4 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
8 lever galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
ball valves “wafer” barstock construction in according to:
- peD 97/23/Ce - api 598- asme 16.34 iso 14313- ansi b 16.10 – en 558-1- ansi b 16.5 en 1092-1
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
Certifications
waFer BallValVes MG 20
ØD
A
L
H
1 2
3
4
5
6
7
8
9
10
11
1213
L1
size size
PN 1
6/40
ANSI
300
ANSI
150
ANSI
600
15 151/2” 1/2”
32 3265 6520 203/4” 3/4”1” 1”1 1/4” 1 1/4”1 1/2” 1 1/2”2” 2”2 1/2” 2 1/2”3” 3”4” 4”5” 5”6” 6”
40 4080 8025 2550 50100 100125 125
35l 46 66 98 14043 55 73 120 177 210 35l 46 66 98 14043 55 73 120 177 210
35l 46 66 98 14043 55 73 120 177 210150a 185 285185 285 285
150a 185 285 380 460185 285 285 380 460 46014D 25 38 65 9420 32 48 75 118 144
150a 185 285 380 460185 285 285 380 460 460
150a 185 285 380 460185 285 285 380 460 46035l1 46 66 107 15243 55 80 120 177 240 35l1 46 66 107 15243 55 80 120 177 240
35l1 46 66 107 15243 55 80 120 177 24014D 25 3820 32 48
14D 25 38 65 9420 32 48 75 118 14440l 53 7343 55 80
14D 25 38 65 9420 32 48 75 118 144
150 150
21
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- painted with our ral 7031- iso 5211 top work drilling- Three way ball valve “l”
- locking device- lever extension- bare stem- as per customer specification
Full Bore
Standard features:
Upon request:
ball valves “wafer THree way” bar stock construction in according to:
- peD 97/23/Ce - api 598- asme 16.34 iso 14313- ansi b 16.10 – en 558-1- ansi b 16.5 en 1092-1
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
Certifications
waFer BallValVes MG 22
WAFER THREE WAY
A
ØD
L
L1
H
V
ref description material material material
1 boDy asTm a105 asTm a182 f316l asTm a350 lf2
9 pressing busH asTm a105 galvaniZeD asTm a105 galvaniZeD a350 lf2 galvaniZeD
5 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
12 spring C.72 galvaniZeD C.72 galvaniZeD C.72 galvaniZeD
3 ball asTm a182 f316l asTm a182 f316l asTm a182 f316l
11 o-ring viTon viTon viTon
7 seaTs rpTfe/Delrin rpTfe/Delrin rpTfe/Delrin*
2 Closure asTm a105 asTm a182 f316l asTm a350 lf2
10 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
6 nuTs gr.6s galvaniZeD gr.6s galvaniZeD gr.6s galvaniZeD
13 sTem gasKeTs rpTfe rpTfe rpTfe
4 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
8 lever galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
size size
PN 1
6/40
800
PSI
ANSI
150
20 2040 401/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”5” 5”4” 4”6” 6”
25 2550 5015 1532 3265 6580 80125 125
35l 46 66 98 14043 55 73 120 177 210 35l 46 66 98 14043 55 73 120 177 210
35l 46 66 98 14043 55 73 120 177 21085v 90 120 150 18590 105 130 175 85v 90 120 150 18590 105 130 175
95v 90 120 150 18590 105 130 175
150a 185 285 380 460185 285 285 381 460 460 150a 185 285 380 460185 285 285 380 460 460
150a 185 285 380 460185 285 285 380 460 460
35l1 46 66 107 15243 55 80 120 177 240 35l1 46 66 107 15243 55 80 120 177 240
35l1 46 66 107 15243 55 80 120 177 240
14D 25 38 65 9420 32 48 75 118 144 14D 25 38 65 9420 32 48 75 118 144
14D 25 38 65 9420 32 48 75 118 144
100 100150 150
23
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
MonoBloCKValVes
antistatic device
sTanDarD feaTures
parTiCular wafer ball valves
opTions
locking device extended stem
extended stem and locking device
size 1/2” 3/4” 1” 1. 1/4” 1. 1/2” 2” 2. 1/2” 3” 4” 5” 6”
f 03iso 5211 f 03 f 05 f 05 f 07f 03 f 03 f 05 f 07 f 10 f 10
bare stem
iso 5211 - Top Drilling worK
ref description material material material
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- Cs galvanized- bsp female or npT female
- bsp or npT male/male ends- bsp or npT male/female ends- locking device- lever extension- iso 5211 top work drilling- as per customer specification
Full and reduced Bore
Standard features:
Upon request:
1 boDy asTm a105 asTm a182 f316l asTm a350 lf2
9 pressing busH asTm a105 galvaniZeD asTm a105 galvaniZeD a350 lf2 galvaniZeD
5 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
12 spring C.72 galvaniZeD C.72 galvaniZeD C.72 galvaniZeD
3 ball asTm a182 f316l asTm a182 f316l asTm a182 f316l
11 o-ring viTon viTon viTon
7 seaTs rpTfe/Delrin* rpTfe/Delrin* rpTfe/Delrin*
2 Closure asTm a105 asTm a182 f316l asTm a350 lf2
10 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
6 nuTs gr.6s galvaniZeD gr.6s galvaniZeD gr.6s galvaniZeD
13 sTem gasKeTs rpTfe rpTfe rpTfe
4 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
8 lever galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
ball valves “monobloCK” bar stock construction in according to:
- peD 97/23/Ce
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
Certifications
MonoBloCKValVes MG 30
THREADED BALL VALVE
size size
800
PSI
3000
PSI
1500
PSI
6000
PSI
8 81/4” 1/4”
20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”
25 2550 5015 1532 3265 6580 80
65l 75 100 125 16065 90 115 150 200 225 65l 75 100 125 16065 90 115 150 200
65l 75 100 125 16065 90 115 150 200 225 65l 75 100 12565 90 115 150
150a 150 185 285 380150 185 285 285 380 460 150a 150 185 285 380150 185 285 285 380
150a 150 185 285 380150 185 285 285 380 460 150a 150 185 285150 185 285 380
11D 14 25 38 6511 20 32 48 75 94 11D 14 25 38 6511 20 32 48 75
11D 14 25 38 6511 20 32 48 75 94 11D 14 25 3811 20 32 48
62H 70 90 100 16062 80 95 105 203 227 62H 70 90 100 16062 80 95 105 203
62H 70 90 100 16062 80 95 105 203 227 62H 70 90 10062 80 95 105
100 100
* from 1500 To 6000 (Delrin)
full bore
reDuCeD bore
A
H
L
ØD
1 2
3
4
5
6
7
8
9
10
11
12
13
27
size size
800
PSI
3000
PSI
1500
PSI
6000
PSI
8 81/4” 1/4”
20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”
25 2550 5015 1532 3265 6580 80
65l 65 90 115 15065 75 100 125 160 200 65l 65 90 115 16065 75 100 125 160
65l 65 90 115 15065 75 100 125 160 200 65l 65 90 11565 75 100 125
150a 150 185 285 380150 185 285 285 380 460 150a 150 185 285 380150 185 285 285 380
150a 150 185 285 380150 185 285 285 380 460 150a 150 185 285150 185 285 285
11D 11 20 32 4811 14 25 38 65 75 11D 11 20 32 4811 14 25 38 65
11D 11 20 32 4811 14 25 38 65 75 11D 11 20 3211 14 25 38
62H 62 80 95 10562 70 90 100 160 203 62H 62 80 95 10562 70 90 100 160
62H 62 80 95 10562 70 90 100 160 203 62H 62 80 9562 70 90 100
100 100
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
ref description material material material
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- Cs galvanized- nipples 100mm
- sw sHorT paTTern- sw x THD female ends- sw x THD male ends- locking device- lever extension- iso 5211 top work drilling- as per customer specification
Full and reduced Bore
Standard features:
Upon request:
1 boDy asTm a105 asTm a182 f316l asTm a350 lf2
9 pressing busH asTm a105 galvaniZeD asTm a105 galvaniZeD a350 lf2 galvaniZeD
5 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
12 spring C.72 galvaniZeD C.72 galvaniZeD C.72 galvaniZeD
3 ball asTm a182 f316l asTm a182 f316l asTm a182 f316l
11 o-ring viTon viTon viTon
7 seaTs rpTfe/Delrin* rpTfe/Delrin* rpTfe/Delrin*
2 Closure asTm a105 asTm a182 f316l asTm a350 lf2
10 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
6 nuTs gr.6s galvaniZeD gr.6s galvaniZeD gr.6s galvaniZeD
13 sTem gasKeTs rpTfe rpTfe rpTfe
4 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
8 lever galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
ball valves “monobloCK” barstock construction in according to:
- peD 97/23/Ce
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
Certifications
SOCKET WELD BALL VALVE
* from 1500 To 6000 (Delrin)
size size
800
PSI
3000
PSI
1500
PSI
6000
PSI
8 81/4” 1/4”
20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”
25 2550 5015 1532 3265 6580 80
237l 241 264 281 305237 253 271 300 315 348 237l 241 264 281 305237 253 271 300 315
237l 241 264 281 305237 253 271 300 315 348 237l 241 264 281237 253 271 300
150a 150 185 285 380150 185 285 285 380 460 150a 150 185 285 380150 185 285 285 380
150a 150 185 285 380150 185 285 285 380 460 150a 150 185 285150 185 285 285
11D 14 25 38 6511 20 32 48 75 94 11D 14 25 38 6511 20 32 48 75
11D 14 25 38 6511 20 32 48 75 94 11D 14 25 3811 20 32 48
62H 70 90 100 16062 80 95 105 203 227 62H 70 90 100 16062 80 95 105 203
62H 70 90 100 16062 80 95 105 203 227 62H 70 90 10062 80 95 105
100 100A
H
L
ØD
1 2
3
4
5
6
7
8
9
10
11
12
13
100 100
MonoBloCKValVes MG 60
size size
800
PSI
3000
PSI
1500
PSI
6000
PSI
8 81/4” 1/4”
20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”
25 2550 5015 1532 3265 6580 80
237l 237 253 271 300237 241 264 281 305 315
237l 237 253 271 300237 241 264 281 305 315
237l 237 253 271 300237 241 264 281 305
237l 237 253 271237 241 264 281
150a 150 185 285 285150 150 185 285 380 380
150a 150 185 285 285150 150 185 285 380 380
150a 150 185 285 285150 150 185 285 380
150a 150 185 285150 150 185 285
11D 11 20 32 4811 14 25 38 65 75
11D 11 20 32 4811 14 25 38 65 75
11D 11 20 32 4811 14 25 38 65
11D 11 20 3211 14 25 38
62H 62 85 95 10562 70 90 100 160 203
62H 62 85 95 10562 70 90 100 160 203
62H 62 85 95 10562 70 90 100 160
62H 62 85 9562 70 90 100
100 100
full bore
reDuCeD bore
29
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
ref description material material material
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- Cs galvanized- schedule 80 nipples (100mm)
- bw x THD female ends- bw x THD male ends- locking device- lever extension- schedule 160 or XXs nipples- iso 5211 top work drilling- as per customer specification
Full and reduced Bore
Standard features:
Upon request:
1 boDy asTm a105 asTm a182 f316l asTm a350 lf2
9 pressing busH asTm a105 galvaniZeD asTm a105 galvaniZeD a350 lf2 galvaniZeD
5 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
12 spring C.72 galvaniZeD C.72 galvaniZeD C.72 galvaniZeD
3 ball asTm a182 f316l asTm a182 f316l asTm a182 f316l
11 o-ring viTon viTon viTon
7 seaTs rpTfe/Delrin* rpTfe/Delrin* rpTfe/Delrin*
2 Closure asTm a105 asTm a182 f316l asTm a350 lf2
10 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
6 nuTs gr.6s galvaniZeD gr.6s galvaniZeD gr.6s galvaniZeD
13 sTem gasKeTs rpTfe rpTfe rpTfe
4 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
8 lever galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
ball valves “monobloCK” barstock construction in according to:
- peD 97/23/Ce
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
Certifications
BUTT WELD BALL VALVE WITH PRE-WELDED NIPPLES
* from 1500 To 6000 (Delrin)
A
H
L
ØD
1 2
3
4
5
6
7
8
9
10
11
12
13
100100
size size
800
PSI
3000
PSI
1500
PSI
6000
PSI
8 81/4” 1/4”
20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”
25 2550 5015 1532 3265 6580 80
265l 275 300 325 360265 290 315 350 400 425
265l 275 300 325 360265 290 315 350 400 425
265l 275 300 325 360265 290 315 350 400
265l 275 300 325265 290 315 350
150a 150 185 285 380150 185 285 285 380 460
150a 150 185 285 380150 185 285 285 380 460
150a 150 185 285 380150 185 285 285 380
150a 150 185 285150 185 285 285
11D 14 25 38 6511 20 32 48 75 94
11D 14 25 38 6511 20 32 48 75 94
11D 14 25 38 6511 20 32 48 75
11D 14 25 3811 20 32 48
62H 70 90 100 16062 80 95 105 203 227
62H 70 90 100 16062 80 95 105 203 227
62H 70 90 100 16062 80 95 105 203
62H 70 90 10062 80 95 105
100 100
31
MonoBloCKValVes MG 50
size size
800
PSI
3000
PSI
1500
PSI
6000
PSI
8 81/4” 1/4”
20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”
25 2550 5015 1532 3265 6580 80
265l 275 300 325 360265 290 315 350 400 425
265l 275 300 325 360265 290 315 350 400 425
265l 275 300 325 360265 290 315 350 400
265l 275 300 325265 290 315 350
150a 150 185 285 380150 185 285 285 380 460
150a 150 185 285 380150 185 285 285 380 460
150a 150 185 285 380150 185 285 285 380
150a 150 185 285150 185 285 285
11D 14 25 38 6511 20 32 48 75 94
11D 14 25 38 6511 20 32 48 75 94
11D 14 25 38 6511 20 32 48 75
11D 14 25 3811 20 32 48
62H 70 90 100 16062 80 95 105 203 227
62H 70 90 100 16062 80 95 105 203 227
62H 70 90 100 16062 80 95 105 203
62H 70 90 10062 80 95 105
100 100
full bore
reDuCeD bore
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
ref description material material material
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- Cs galvanized- schedule 80 nipples (100mm)
- bw x THD female ends- bw x THD male ends- locking device- lever extension- schedule 160 or XXs nipples- iso 5211 top work drilling- as per customer specification
Full and reduced Bore
Standard features:
Upon request:
1 boDy asTm a105 asTm a182 f316l asTm a350 lf2
9 pressing busH asTm a105 galvaniZeD asTm a105 galvaniZeD a350 lf2 galvaniZeD
5 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
12 spring C.72 galvaniZeD C.72 galvaniZeD C.72 galvaniZeD
3 ball asTm a182 f316l asTm a182 f316l asTm a182 f316l
11 o-ring viTon viTon viTon
7 seaTs rpTfe/Delrin* rpTfe/Delrin* rpTfe/Delrin*
2 Closure asTm a105 asTm a182 f316l asTm a350 lf2
10 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
6 nuTs gr.6s galvaniZeD gr.6s galvaniZeD gr.6s galvaniZeD
13 sTem gasKeTs rpTfe rpTfe rpTfe
4 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
8 lever galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
ball valves “monobloCK” barstock construction in according to:
- peD 97/23/Ce
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
Certifications
BUTT WELD BALL VALVE WITH INTEGRAL NIPPLES
* from 1500 To 6000 (Delrin)
A
H
L
ØD
1 2
3
4
5
6
7
8
9
10
11
12
13
100 100
30 30
size size
800
PSI
3000
PSI
1500
PSI
6000
PSI
8 81/4” 1/4”
20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”
25 2550 5015 1532 3265 6580 80
237l 241 264 281 305237 253 271 300 315 348
237l 241 264 281 305237 253 271 300 315 348
237l 241 264 281 305237 253 271 300 315
237l 241 264 281237 253 271 300
150a 150 185 285 380150 185 285 285 380 460
150a 150 185 285 380150 185 285 285 380 460
150a 150 185 285 380150 185 285 285 380
150a 150 185 285150 185 285 285
11D 14 25 38 6511 20 32 48 75 95
11D 14 25 38 6511 20 32 48 75 95
11D 14 25 38 6511 20 32 48 75
11D 14 25 3811 20 32 48
62H 70 90 100 16062 80 95 105 203 227
62H 70 90 100 16062 80 95 105 203 227
62H 70 90 100 16062 80 95 105 203
62H 70 90 10062 80 95 105
100 100
33
MonoBloCKValVes MG 50i
size size
800
PSI
3000
PSI
1500
PSI
6000
PSI
8 81/4” 1/4”
20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”
25 2550 5015 1532 3265 6580 80
237l 237 253 271 300237 241 264 281 305 315 237l 237 253 271 300237 241 264 281 305
237l 237 253 271237 241 264 281237l 237 253 271 300237 241 264 281 305 315
150a 150 185 285 285150 150 185 285 380 380 150a 150 185 285 285150 150 185 285 380
150a 150 185 285150 150 185 285150a 150 185 285 285150 150 185 285 380 380
11D 11 20 32 4811 14 25 38 65 75 11D 11 20 32 4811 14 25 38 65
11D 11 20 3211 14 25 3811D 11 20 32 4811 14 25 38 65 75
62H 62 85 95 10562 70 90 100 160 203 62H 62 85 95 10562 70 90 100 160
100 100
full bore
reDuCeD bore
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
ref description material material material
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- Cs galvanized- iso 5211 top work drilling- Three way ball valve “l”
- locking device- lever extension- reduced bore- Three way ball valve “T”- as per customer specification
Full Bore
Standard features:
Upon request:
1 boDy asTm a105 asTm a182 f316l asTm a350 lf2
9 pressing busH asTm a105 galvaniZeD asTm a105 galvaniZeD a350 lf2 galvaniZeD
5 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
12 spring C.72 galvaniZeD C.72 galvaniZeD C.72 galvaniZeD
3 ball asTm a182 f316l asTm a182 f316l asTm a182 f316l
11 o-ring viTon viTon viTon
7 seaTs rpTfe/Delrin* rpTfe/Delrin* rpTfe/Delrin*
2 Closure asTm a105 asTm a182 f316l asTm a350 lf2
10 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
6 nuTs gr.6s galvaniZeD gr.6s galvaniZeD gr.6s galvaniZeD
13 sTem gasKeTs rpTfe rpTfe rpTfe
4 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
8 lever galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
ball valves “THree way” bar stock construction in according to:
- peD 97/23/Ce
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
Certifications
THREE WAY BALL VALVE
* from 1500 To 6000 (Delrin)
12 3
4
5
6
7
89
10
11
1213
A
H
L
E
ØD
B
size
PN 1
6/40
ANSI
150
20 401/2” 3/4” 1” 1,1/4” 1.1/2” 2” 2.1/2”
25 50 6515 32
75l 90 120 15575 102 135
75l 90 120 15575 102 135
63H 85 95 10563 90 100
63H 85 95 10563 90 100
22,5e 30 40 5022,5 35 45
22,5e 30 40 5022,5 35 45
11D 14 25 3811 20 32
11D 14 25 3811 20 32
150a 150 185 285150 185 285
150a 150 185 285150 185 285
37,5b 45 60 77,537,5 51 67,5
37,5b 45 60 77,537,5 51 67,5
size
ANSI
300
20 401/2” 3/4” 1” 1,1/4” 1.1/2” 2” 2.1/2”
25 50 6515 32
75l 90 120 15575 102 135
63H 85 95 10563 90 100
22,5e 30 40 5022,5 35 4511D 14 25 3811 20 32
150a 150 185 285150 185 285
37,5b 45 60 77,537,5 51 67,5
35
MonoBloCKValVes MG 40
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
ref description material material material
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- Cs galvanized
- Threaded- with nipples- locking device- lever extension- reduced bore- as per customer specification
Full Bore
Standard features:
Upon request:
1 boDy asTm a105 asTm a182 f316l asTm a350 lf2
9 pressing busH asTm a105 galvaniZeD asTm a105 galvaniZeD a350 lf2 galvaniZeD
5 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
12 spring C.72 galvaniZeD C.72 galvaniZeD C.72 galvaniZeD
3 ball asTm a182 f316l asTm a182 f316l asTm a182 f316l
11 o-ring viTon viTon viTon
7 seaTs rpTfe/Delrin* rpTfe/Delrin* rpTfe/Delrin*
2 Closure asTm a105 asTm a182 f316l asTm a350 lf2
10 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
6 nuTs gr.6s galvaniZeD gr.6s galvaniZeD gr.6s galvaniZeD
13 sTem gasKeTs rpTfe rpTfe rpTfe
14 sCrews 8.8 galvaniZeD 8.8 galvaniZeD 8.8 galvaniZeD
4 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
8 lever galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel
ball valves “THree pieCes” bar stock construction in according to:
- peD 97/23/Ce
fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497
Certifications
* from 1500 To 6000 (Delrin)
A
H
L
ØD
1 2
3
4
5
6
7
8
9
10
11
12
13
14
size
800
PSI
1500
PSI
20 40103/8” 1/2” 3/4” 1” 1,1/4” 1.1/2” 2” 2.1/2” 3” 4”
25 5015 32 65 80
l
l
a 150 185 285 380185 285 285 380 460
150 185 285 380185 285 285 380 460a
D
D
H
75 100 125 16075 90 115 150 200 225
15014 25 38 6511 20 32 48 75 94
70 90 100 16065 85 95 105 203 22775 100 125 16075 90 115 150 200 225
15014 25 38 6511 20 32 48 75 94
70 90 100 16065 85 95 105 203 227H
100size
3000
PSI
6000
PSI
20 40103/8” 1/2” 3/4” 1” 1,1/4” 1.1/2” 2” 2.1/2” 3” 4”
25 5015 32 65 80
l
l
a
150 185 285 380185 285 285 380 460
150 185 285 380185 285 285 380 460
a
D
D
H
75 100 125 16075 90 115 150 200 225
15014 25 38 6511 20 32 48 75 94
70 90 100 16065 85 95 105 203 22775 100 125 16075 90 115 150 200 225
15014 25 38 6511 20 32 48 75 94
70 90 100 16065 85 95 105 203 227H
100
37
THree pieCes BallValVes MG 24
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
needleValVes
antistatic device
sTanDarD feaTures
parTiCular monobloCK valves
opTions
locking device extended stem
extended stem and locking device
ref description material material material
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- gas or npT- Cs galvanized
- flange needle valves- needle valve a 90°- sw- npTxgas
DifferenT HanDwHeel- T-bar- bachelite
Standard features:
Upon request:
1 boDy asTm a105 asTm a182 f316l asTm a350 lf2
9 HanDwHeel formeD sTeel formeD sTeel formeD sTeel
5 HeaDworK asTm a105 galvaniZeD aisi a182 f316 asTm a350 lf2
3 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
7 paCKing pTfe* pTfe* pTfe*
2 moving sTopper asTm a182 f316l asTm a182 f316l asTm a182 f316l
6 Cover asTm a105 galvaniZeD aisi a182 f316 asTm a350 lf2
4 gasKeT KlingeriTe KlingeriTe KlingeriTe
8 glanD asTm a105 galvaniZeD aisi a182 f316 asTm a350 lf2
needle valves bar stock constructionin according to:
- peD 97/23/Ce- aTeX
Certifications
* for 6000 psi (grapHoil)
ØG
E
H1
H2
L
ØF
1
2
3
4
5
6
7
8
9
size size
3000
PSI
6000
PSI
8 81/4” 1/4”
20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”
25 2550 5015 1532 32
30e 30 40 6030 35 50 70 30e 35 50 7030 40 60 70
115H1 115 136 175115 118 165 185 115H1 118 165 185115 136 175 185
60l 60 75 10060 70 90 120 60l 70 90 12060 75 100 1205f 6 9 166 7,5 11,5 19 5f 6 9 166 7,5 11,5 19
127H2 127 147 187127 129 177 197 127H2 129 177 197127 147 187 197
70g 70 80 12570 70 125 125 70g 70 125 12570 80 125 125
41
needleValVes MG 300
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- gas or npT- Cs galvanized- pressure gauge (mg350)- pressure gauge wiTH Drain (mg360)- pressure gauge wiTH Drain anD ConTrol flange (mg370)
DifferenT HanDwHeel- T-bar- baCHeliTe
Standard features:
350 360370 Upon request:
needle valves “pressure gauge” bar stock constructionin according to:
- peD 97/23/Ce- aTeX
Certifications
PRESSURE GAUGE VALVE
needle ValVesMG 350 360 370
* for 6000 psi (grapHoil)
ØG
E
H1
L
ØF
1
2
3
6
5
9
H2
4
8
7
ref description material material material
1 boDy asTm a105 asTm a182 f316l asTm a350 lf2
9 HanDwHeel formeD sTeel formeD sTeel formeD sTeel
5 HeaDworK asTm a105 galvaniZeD aisi a182 f316 asTm a350 lf2
3 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
7 paCKing pTfe* pTfe* pTfe*
2 moving sTopper asTm a182 f316l asTm a182 f316l asTm a182 f316l
6 Cover asTm a105 galvaniZeD aisi a182 f316 asTm a350 lf2
4 gasKeT KlingeriTe KlingeriTe KlingeriTe
8 glanD asTm a105 galvaniZeD aisi a182 f316 asTm a350 lf2
size
3000
PSI
6000
PSIM
G350
/MG3
60
81/4”
103/8” 1/2”
15
30e 3030
30e 3030
115H1 115115
115H1 115115
60l 6060
70l 7070
3,5f 44
3,5f 44
127H2 127127
127H2 127127
70g 7070
70g 7070
size
MG3
7030
00 P
SI60
00 P
SI
81/4”
103/8” 1/2”
15
30e 3030
30e 3030
115H1 115115
115H1 115115
30p 3030
40p 4040
60l 6060
60l 6060
3,5f 44
3,5f 44
127H2 127127
127H2 127127
3,5m 44
40m 4040
70g 7070
70g 7070
E
H1
ØG
L
1
ØF
3
2
5
6
9
H2
4
8
7
E
H1
ØG
L
1
ØF
3
2
5
6
9
H2
4
8
7
ØM
P
43
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
ref description material material material
- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- Cs galvanized- gas or npT
- sw
Full Bore
Standard features:
Upon request:
1 boDy asTm a105 galvaniZeD asTm a182 f316l asTm a105 galvaniZeD
5 gasKeT pTfe/Delrin* pTfe/Delrin* pTfe/Delrin*
3 ring nuT asTm a105 asTm a182 f316l asTm a350 lf2
2 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l
4 spring aisi 316 aisi 316 aisi 316
Check valves bar stock constructionin according to:
- peD 97/23/Ce - aTeX
Certifications
* from 1500 To 6000 (Delrin)
size
3000
PSI
3000
PSI
3000
PSI
81/4”
20 40103/8” 1/2” 3/4” 1” 1,1/4” 1.1/2” 2”
25 5015 32
75a 65 80 9575 75 90 110
75a 65 80 9575 75 90 110
75a 65 80 9575 75 90 110
40l 40 50 7040 40 60 80
40l 40 50 7040 40 60 80
40l 40 50 7040 40 60 80
1
2
3
4
5
L
ØA
45
CHeCK ValVesMG 100
magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]
qualiTy TesT
To achieve this objective magival valves has implemented and maintains an updated Quality management system in accordance with iso 9001:2008 and api Q1.magival valves ensures that the quality policy is understood, implemented and maintained at all levels; the quality program is focused on continual improvement and it’s continually subjected to review and audit by internal personal, external agency inspectors and the most important worldwide engineering companies.
magival valves products fulfill all the main international standards (ex. iso, api, asme, ansi, asTm, naCe, bs etc.)we obtained the following products certificates and new ones are in progress.
100% ball valves are tested:
• Hydrostatic body test• Hydrostatic seat test• pneumatic body test• visual and dimensional test• functional and operability test
upon request also the following test:
• fugitive emission Test• gas test• non-destructive Test
47
magival valves s.r.l. is an italian longlasting ball valves manufacturer with a well equipped production unit that satisfies most of the engineering requirements of oil & gas, petrochemical and water world.european forged materials (lf2 - f316 – f53 – f55 – inConel 625…), speedy deliveries (one week for split body valves), competitive prices, multinational flexible work force and quality management keep magival valves an ethical and reliable partner.mr. possamai and his daughter federica invite you to join the evolution path that started in 1978.
hi..'-. -- --
MAGIVAL VALVES
Magival valves S.r.l. , via per Gallarate, 50/b - 21010 Besnate (YA) Italy I T +39 0331 27 41 09 I F +39 0331 27 45 65
[email protected] t I comme rcial e@magi val. it I www.magival.it
Global Supply Line Australia major Magival distributor & stockist, supplying world wide. www.globalsupplyline.com.au
Contact us: [email protected]