MAGIC LAMPWith arduino uno

D3 – RACE

‘2A’

When or

where we used

it ?

What is the temperature lamp ?

Which kind of system that this temperature lamp is used ?

How can it work ?

LIST

NEXT

What Is The Temperature Lamp ?

Temperature Lamp is a

lamp that we can used it for

light some places with

different function of different

colors of that lamp.

When Or Where Can We Used It ?

We can used it in

everywhere but, if we wanted to

get a nice performance, we

should have to put it on the dark

places. Because this lamp its

especially used for your

bedroom.

So when you sleep, you just

not to get one kind of colors

lamp, but you can see some

different colors of your lamp.

.

Which Kind Of System That This Temperature Lamp Is Used ?

This lamp are built with three steps

that can make one system, these

steps are :

1.We used Arduino Uno and other

components

2.We used electrical series

3.We used some coding for the

system

.

Which Kind Of System That This Temperature Lamp Is Used ?

These are components that

we used for build

temperature lamp :

Arduino Uno&USB Cable

Laptop / pc

FrameworkOf

lamp

Casing

Of

arduino

LED (red,blue,white

)

Resistor of the lamps (100µ)

TIN SOLDER WIRE,

solder, unsoldering

LDR

Resistor of LDR (10 kµ)

LM 35

CONNECTOR CABLES

PIN HEADER&

BLACK HOUSE

pcb

Which Kind Of System That This Temperature Lamp Is Used ?

These are steps to make the

temperature lamp :

1. Prepare all of components and

make sure that all of it worked

2. Make an electrical series like this

picture. But remember, we should

have to pair it with voltage

source (adaptor 5 V).

Which Kind Of System That This Temperature Lamp Is Used ?

3. Combine two series of

electrical (LDR and LM35)

then put it on the PCB (in

here, we also use solder and

so on)

4. Turn ON the Arduino Uno and

make some coding like this…

Which Kind Of System That This Temperature Lamp Is Used ?

5. And after that, put the arduino

uno in the box or casing from

acrylic.

6. After all of components ready to

used, then we put it on the

framework of the lamp.

7. Finally, we can turn on the lamp

with adaptor or other power

supply.

MAGIC LAMPWith

Arduino Uno

THE RESULTS….

How Can It Work ?This lamp can work (or the lamp will turn on) when

we put it on the dark places. Why? Because when we

make the coding we set the sensor value of LDR is

less than 500. So its mean when the sensor read no

light around it, so the LED will turn ON. And the other

way, when the sensor read light around it, the LED

will turn OFF.

And how about the difference colors of the lamp?

This is the special of our lamp. Its not just one

kind of color, but we can turn ON three kind of colors.

We can call it temperature lamp because with LM 35

we can set one colors which has some range of

temperature around it. So this lamp is not only for

lighting, but this lamp can be used to for measuring

temprature. ^^

SOURCE

http://www.ladyada.net/

learn/sensors/tmp36.html

THANK YOU FOR YOURATTENTION ^_^