made in the u.s.a. - colwood · pdf filethe logical question to ask is, “how much...

Made in the U.S.A.

Detailer Cub Galaxy Renaissance Super Pro

Pyrography: The art or process of producing designs on wood, or other material using heated tools or a fine flame.

Since 1979 Colwood has supplied the art world with professional, affordable woodburning tools and accessories. With a choice of five control units and over 100 variations of 40 tip styles, Col-wood can satisfy any skill level, budget, or pyrographic need. No longer the sole province of duck and bird carvers, woodburn-ing tools are now being used by everyone from the stamp artist to the leather worker. New materials, such as vellum, ivory, bone, eggshell, gourds, card stock, x-ray film, cork, and of course wood, work well with Colwood tools.

Burning your piece adds a unique dimension; the burned piece has more depth than if the pieces were merely painted. The picture of the owl on the left is an example of a woodburning that was also colored in. Woodburners are also very popular with gourd artists. Some gourds are very hard and re-quire a woodburner with more power; we recommend using a heavy duty cord for generating this extra power.

Each of our products has been developed with the customer in mind. Using input from world class artists, we created and tailored our products to satisfy your most meticulous needs. Thus, Colwood tools are precise, easy-to-use, and cost effec-tive. All our units are manufactured right in our New Jersey locations in order to provide the best possible service. Colwood also offers a full line of accessories, as well as books and instructional materials on carving and burning. Our staff is knowledgeable and friendly, so feel free to give us a call for additional information or any questions or concerns that you may have. If you have access to the Internet, please visit our web site at www.woodburning.com.

Colwood 44 Main Street

Farmingdale, NJ 07727 Tel: 732.938.5556 Fax:732.938.9037

www.woodburning.com

Great Blue Heron

How Woodburning Units Work Virtually all of the modern woodburning units are constructed in the same manner. A transformer provides the power and is controlled by a device not unlike a light dimmer that passes the power to a handpiece cord where a burning pen and tip are attached. The trans-former’s purpose is to step down the voltage to a useable level that is regulated by the controller that passes the power through the cord to the handpiece and tip.

The Wattage Controversy There has been a lot of misleading information concerning watt-age on woodburning units. Many manufacturers make high watt-age claims that are false. We have tested many of these units and have found that they all consume less than 45 watts of power, including the units claiming to deliver 130 watts max. Simply put, wattage is power; and generally speaking, more is better than

less. The logical question to ask is, “How much wattage do I need?” To answer this we conducted an experiment in our shop using a wattmeter (a device that measures power consumption), a Detailer with 18 gauge cord, and a “K” tip (small point). Several lines were burned with the Detailer’s control knob set to 5. We were able to burn nice, crisp “toast” colored lines-- the wattmeter registered 15 watts! Next, we set the Detailer to full power. The “K” tip glowed a bright orange, ignited the wood, and burned thick, charred lines lacking the fine detail that artists require. The wattmeter registered 27 watts. With respect to woodburning, we feel that wattage rating is severely overrated. You should chose a woodburner that has the features that you require, and a price tag that fits your budget. Colwood’s wide selection of control units, and handpiece cords make it easy for you to accomplish this while satisfying all your artistic needs.

Heat Setting of 5

“K” Tip

Heat Setting of 10

“K” tip glowing with Detailer set to max power

Learn to Burn “Pyrography Basics”

By

Lora Irish

“The Art & Craft of Pyrography” By

Lora Irish

“Woodburning: Project & Pattern Treasury” by

Deborah Pompano

This book offers more than forty amazingly detailed new projects that explore the craft of pyrography across a full range of inventive media. Also included are tips and tech-niques on creating tonal values, understanding shadows, adding color to your burnings, and finishing your work. Each fascinating project has complete instructions plus pho-tographs of both finished pieces and the work-in-progress across pale, medium, dark, and detailed stages.

Inside this, her first book, Deborah Pompano shares techniques for getting started in woodburning. You'll learn what 5 tips she recommends, how to create a vast variety of dimension, shade and texture with your woodburner and how to develop your drawing skills for use in pyrography. At the heart of this book is an unbelievable treasure trove of patterns. The patterns cover a wide spectrum of themes including: harvest, arbor, birds and other wildlife, seaside, clipper ship, teatime, Native Ameri-can, garden, floral, lighthouse, and much more. The book includes two practice exercises, one step by step project and close up instruction on lettering.

Nationally recognized artist and pyrog-rapher Lora S. Irish makes it easy for beginners to learn the creative craft of woodburning in Pyrography Basics. All that aspiring beginners need is this book and an inexpensive woodburning tool to start adorning wood, gourds, leather, paper and more ...

More From Colwood Pyrography Workshop DVD by Sue Walters

Watch and follow along as Sue Walters demonstrates how to create a bird portrait in high realism from pattern to finished picture. A complete instructional DVD workshop including:

• 1 hardcopy outline pattern

• 1 hardcopy texture map

• 1 hardcopy full color picture

• 2 DVD Set Over 85 minutes One on One Training Bonus 20 minute chapter—An introduc-tion to Burning including Tips and Tech-niques, a How To Guide, and a Guide to Troubleshooting

Sally’s Artist Graphite and Transfer Paper Use Sally's WAX FREE Artists Graphite Pa-per to transfer your design from a pattern, sketch, template or free-hand onto ANY sur-face: paper, wood, fabric, canvas, metal, glass, tile, ceramic, etc. Sally's leaves no wax resi-due, so the transfer line can be erased like pencil with any eraser; it can be washed off ceramic, glass, tile and metal. Sally's can be washed out of fabric and a hot iron will NOT set the transfer lines as with other tracing or transfer papers made for fabrics. The transfer line can be painted or inked over with no skipping or bleeding. Each sheet can be used over and over again - Economical. 12 Individual Sheets 18" x 24" or one roll 12’ x 12”

How to Use Your Colwood Woodburning Tool

Woodburning Kits

For those people who are not sure what to purchase, Colwood has several kits that are available with the most

popular tip styles. These tip styles are designed to let the artist achieve the most popular techniques — fine detail, writing/drawing and shading. The Deluxe Kits (pictured)

includes an instructional book, a piece of poplar, clean-ing cloth and honing paper. Visit our web site for more details.

Variable

Heat Control

Handpiece Clip

Separate On/Off Switch

Removable Handpiece

Cord

Detailer Yes Yes Yes Yes

Cub Yes No No No

Super Pro II Yes

Yes (2)

Yes Yes

Accepts RT / FT

Yes

Yes

Yes

Available In Kit

Yes

Yes

Yes

Olympiad Yes No Yes Yes Yes No

Galaxy Yes Yes Yes Yes Yes Yes

Digital Display

No

No

No

No

Yes

Control Unit Comparison Chart

Pyrography Basics Techniques and Exercises for Beginners

by Lora S. Irish

Nationally recognized artist and pyrographer Lora S. Irish makes it easy for beginners to learn the creative craft of woodburning in Pyrography Basics. All that aspiring beginners need is this book and an inexpensive woodburning tool to start adorning wood, gourds, leath-er, paper and more with beautifully burned images and patterns. The author provides a thorough introduc-tion to basic tools, materials and tech-niques. Readers learn how to set up a practice board to experiment with strokes and settings before moving on to working projects with confidence. Seven skill-building projects provide step-by-step exercises in using tempera-ture, time, layering and texturing to create artistic tonal values.

Specialized Tip Packages Now Available

Ball Tip Package All 3 ball tips can now be purchased together in a package at discounted

prices. Ball Tip Packag-es are available in the Fixed Tip and Replacea-

ble Tip Systems

B1—.0394” dia.

B2—.0625” dia. B3—.0938” dia.

Call or visit our website for

pricing and more details.

Circle Tip Package

All 4 circled tips can now be purchased to-gether in a package at

discounted prices. Circle Tip Packages are availa-ble in the Fixed Tip or

Replaceable Tips Sys-tems.

Circle Tip Sizes

.071”

.100”

.189”

.240” Call or visit our website for


Shading Tip Package

Colwood is now offering 4 shading tips in a package at discounted pricing. The

Shading Tip Packages are available in the Fixed Tip and Replaceable Tip Sys-

tems. The 4 shading tips offered in the package are:

S

LSS Spoon Shader

Small Round Shader

Call or visit our website for


Colwood Now Has a YouTube Channel

To view our latest videos visit www.youtube.com and search for “Colwood Woodburning Tools”. A guide to using Colwood Woodburning tools. This video walks you through tip systems and proper burning techniques, outlining every-thing you need to know. It also contains common questions and an-swers, common problems and solutions, and helpful hints.

Control Units Precision, Versatility, Control, and Service - Qualities that describe Colwood’s full line of woodburning tools and accessories. Colwood offers five control units with their own distinct features to satisfy all skill levels—the novice to the professional artist. Each unit includes a sold state controller and an ultra-flex cord as standard equipment. The “guts” of all our control units are housed in a sturdy, custom “cold rolled steel” enclosure, as opposed to a generic, off-the-shelf, plastic box that is susceptible to potential cracking or melting from careless mistakes. All of our units are manufactured and serviced right in our factory. Thus, we can ship virtually every order and repair within a 24 hour period.

The Galaxy Digital display (nominal range 0-550) / 55 distinct temperature settings / Circuitry that compensates for fluctuations in line voltage / 3-Pronged AC cord and built in fuse / Precise, solid state temperature controller / Terminal barrier for easy replacement of handpiece cord / Separate on-off switch / Clip for mounting handpieces / One ultra-flex cord (18 gauge) / Four year warranty / Tip and handpieces sold separately

The Super Pro II The most versatile of Colwood’s line / Selectable front panel switch al-lowing the user to have two different tip styles set up and ready to use / Two terminal barriers for easy replacement of handpiece cords / Lighted on-off switch / Precise solid state temperature controller / Highly visible, slanted front panel / One ultra-flex handpiece cord (18 gauge) / One heavy duty handpiece cord (16 gauge) / Recommended unit for fish carv-ing / Two year warranty / Tips and handpieces sold separately

The Detailer Colwood’s original wood burner / Lighted on-off switch / Precise solid state temperature controller / Terminal barrier for easy replacement of handpiece cord / Clip for mounting handpieces / Two year warranty / Tips and handpieces sold separately

The Cub The smallest and most economical of Colwood’s line / Compact and handy for travel / Pilot light / On-off switch incorporated into the dial / Precise solid state temperature controller / Cable clamp which allows the user to suspend the unit over the work area / One ultra-flex cord (18 gauge) / Two year warranty / Tips and handpieces sold separately

The Olympiad Widest heat range of all our units; contains two trans-

formers / Lighted on-off switch / Precise solid state tem-perature controller / One ultra-flex handpiece cord (18 gauge) / Ideal for signs and plaques, woodworkers, gourd artists / Hot Knife included (not pictured) / Two year warranty / Handpiece pictured not included

Tip Packages

Allows for easy removal of carbon buildup, resulting in

longer tip life and more hours of comfortable burn-

ing.

Used with Grinders ex. Dremel, Foredom, RAM,

NSK, etc. with an 1/8” collet.

- B1 - B2 - B3

- S - LSS - SP - SRS

- C - E - H - J - S - B2

- .071 - .100 - .189 - .240

- B - C - D - J - S

Tip Cleaning Burrs

Package of 5 — $7.00/PK

Tip Packages are available in both Fixed and Replaceable.

Ball Tip Package

Shading Tip Package Standard Variety Tip Package

Gourd Tip Package

Circle Tip Package

Make Your Own Tip Package

Colwood now offers a package that in-cludes everything you need to create your own custom tip.

Includes: -2 RT Bushings -6” Straight Wire -1’ High Temp Solder

IMPORTANT: Tip must be soldered into bushing or it can result in damage to the RT handle.

Product ID: MTP Product ID: TCB

Product ID: STPF

Product ID: STPR

Product ID: BTPF

Product ID: BTPR

Product ID: CTPF

Product ID: CTPR

Product ID: GTPF

Product ID: GTPR

Product ID: VTPF

Product ID: VTPR

- B - C - D - J - S

Deluxe Variety Tip Package Product ID: VDPF

Product ID: VDPR

- K - MC - MR - C1

Suggested Tip Uses

Rounded Tips A, D, J, Mini J, SRW, LRW - Used anywhere on the carving. Best for straight thin lines and concaved areas where the rounded tip helps prevent gouging. The SRW and LRW are unsharpened tips that can be used for doing hair and thicker lines. Pointed Tips B, F, G, K - Used anywhere on the carving, especially good for thin lines on flat areas. Styles BR, GR, HR, KR, MR - Developed at the suggestion of world class carvers. The heel has been rounded off to prevent digging into the wood. Style C, MC - These are two writing tips used in signing your work. Style C is similar to a med-large ballpoint pen. The MC is similar to a fine ballpoint pen. Each MC is individually ground and polished. The MC is is used for extremely fine writing, raising a duck bill’s nostrils, indenting around a duck bill nail, carving wrinkles on birds and fish, modeling around eyes, modeling bird feet, finishing the center shaft of feathers and signing. Special Purpose Tips DA & DG - Double line burning tips allowing you to burn two lines simultaneously. Style E - A general burning tip shaped like a spade with symmetrical burning edges. Style FSL, FSM, FSS - Designed to burn scales on fish. FSL - 1/4”, FSM - 3/16”, FSS - 1/8” Style H - The same size and shape as the “G” tip, but made with a heavier gauge material. This tip is sharpened with a wider angle. It will burn a fine line, but does not burn as deeply into the wood as other tips. Style LE - The “flame tip” or “Long E”. A smaller, longer (1-3/8”) version of the “E” tip ideally suited for smaller carvings. It has a sharp edge on both sides. Made from heavier gauge wire. Style LM - Same shape as the “M” tip but a little longer (1-3/8”) Style M - A micro tip, especially useful on miniatures and wherever fine detail burning is desired. Needle Point - This tip style is very similar to a sewing needle and is useful for extremely fine detail and pointillism. Style PS - Very useful for burning in tight and hard-to-reach areas like under wings. One of Colwood’s longest tips (1-3/8”) Circles - Used to burn circles. Four diameters: .071”, .100”, .189”, .240”. Burn complete circles with one impression Styles S, SP, LSS, SHS, SRS - These are all shading tips, used for adding highlights to the work piece. The “S” is the standard and most popular of the shaders which is suitable for most applications. The “SP” is similar to a spoon shape and useful in tight areas. The “LSS” is the largest of the shaders and best for larger strokes. The “SRS” and “SHS” are the newest of the shading tips. The “SHS” is probably the smallest of the shading tips and is pre-polished. The “SRS” is also pre-polished and is a medium to small sized shading tip. Style QT (Quill Tip) - This tip is used for outlining feathers and shading. Style SQ - Used in raising of shafts and outlining feathers. Also suited for flat burning and for raising sharp lines, shading and calligraphy. Ball Tips - There are three sizes: B1(.039”), B2(.062”), B3(.093”). These tips are chrome ball bearings that glide effortlessly across the work area and are great for drawing, writing and burnishing. Angled Tips - Used to outline and raise feathers and shading or detailing under wings. Available in 45 or 90 degree angle. (Please specify tip angle and whether for right handed or left handed use when ordering.)

Accessories

#0500 RT Handle

#0000C Fixed Tip Protective Container

#0020C Replaceable Tip Protective Container

#0150F Foam Grip for handpieces

#0155 EZ Tip Puller

#0200 Honing Paper

#0201 Cleaning Cloth (for keeping tips clean)

#0750 18 gauge handpiece cord



#0850 Adapter Cord for Detail Master

#0850H Heavy Duty Detail Master Adapter Cord

#0851 Adapter Cord (male x female)

#0852 Razortip Adapter (Razortip tips to Colwood Unit)

#0860 Plastic Carrying Case

#0860S Storage Box (8-1/4” x 4-1/2” x 1-3/4”)

#0866 Wood Carrying Case

#2010D Hot Knife w/ Detail Tip*

#2010W Hot Knife w/ Writing Tip*

#2010TWD Replacement Detail Tip for Hot Knife*

#2010TWW Replacement Writing Tip for Hot Knife*

#2011 Heavy Duty Olympiad Cord*

#2012 Ultra Flex Olympiad Cord*

#3100 Graphite Paper 18” x 24”

#SPC0001 Saral Transfer Paper 12’ Roll

#SPC0020 Sally’s Graphite Paper—12 sheets 18” x 24”

BMP Binocular Magnifier w/ 3 lenses

BML Binocular Magnifier Light

KDP Kiln Dried Poplar

Books & Instructional Materials

#PB1 Pyrography Basics: Techniques and Exercises for Beginners

#FC1 Great Book of Woodburning—Instruction

#FC2 Woodburning: Project & Pattern Treasury

#FC3 The Art & Craft of Pyrography

#SW3 Pyrography Workbook—Instruction

#FR1 Carving Patterns by Frank Russell; 80 carving patterns

#SW5 Pyrography Workshop—2 DVD Set

#SP1 Learning the Art of Pyrography by Al Chapman

TCB Tip Cleaning Burrs –Pack of 5 (for keeping tips clean)

*These products can only be used with the Olympiad control unit.

Instructions for Insertion and Removal ofFixed Tip Handpieces and Replaceable Tips

CORRECT

INCORRECT

A B

IMPORTANT - Make sure that the Male connector “A” is pushed all the way into, and completely covers

the Female Connector “B”. If not fully engaged intermittent operation could result.(see picture abo ve)

PULL

HOW TO REMOVE TIP

1. Grasp tip firmly by collar and pull out. OR2. Use our EZ Tip Puller as shown to the left.

EZ Tip Puller

HOW TO INSERT RT TIPS INTO HANDLE

1. Grasp tip assembly by the collar2. Align keyway in tip with key in handpiece

3. Push tip in firmly

COLLAR KEYWAY

KEY

A

Cork Male Connector

Female Connector

B

Handpiece Cord

Fixed Tip Handpiece

The Fixed Tip handpiece and the RT handle connectto the Handpiece cord in exactly the same manner;Male Connector inserts into the Female connector.The burning tip cannot be removed from the Fixed Tip Handpiece.

RT HandleA

Male Connector

The RT Handle does not come with any tips; theymust be purchased separately. See below for instructionson how to insert or remove the RT tip assembly into RT Handle.

Handpiece Cord

Insertion of Fixed Tip Handpiece and RT Handle into Handpiece Cord

COLLAR

KEYWAY

RT Tip Assembly

The whole RT Tip Assembly isthe . The tip wirecannot be removed from the assembly.

When you want to change tip stylesjust change the RT Tip Assembly.

replaceable tip

RT Tip Insertion and Removal Instructions

Handpiece Systems

RT System The RT system has three components: the Tip Wire, the RT Bushing and the RT Handle / Handpiece. The RT Tip Assembly comprises the Tip Wire and the RT Bushing. The Tip Wire cannot be removed from the RT Bushing, it is permanently crimped and soldered into the RT bushing which provides a more reliable and consistent burn. The RT Tip Assembly plugs into the RT Handle / Handpiece that has special gold plated connectors that ensure consistent operation. To change tip styles, just change RT Tip Assembly.

RT Handle / Handpiece

RT Tip Assembly

Tip Wire

RT Bushing

FT System The FT system also has the three components, but they are hard wired and cannot be separated. Like the RT System, the Tip Wire cannot be removed from the FT Bushing. However, the FT System differs from the RT in that the FT Bushing cannot be removed from the Handle / Handpiece. To change tip styles the entire FT Handpiece is unplugged from the handpiece cord and replaced with a handpiece that has a different tip style.

Colwood offers two kinds of handpiece systems: the Replaceable / Removable Tip and the Fixed Tip. All tip styles are available in either system. In both systems all important connections are gold plated to reduce corrosion and en-hance reliability.

FT Handpiece

Tip Wire

FT Bushing

Advantages and Disadvantages Although both Systems provide consistent and reliable operation, there are some advantages and disadvantages to both. The biggest advantage of the RT System is price. You only have to purchase one Handle / Handpiece and each tip style is less expensive than its counterpart in the FT System. The advantage of the FT System is ease of use. Even though an EZ Tip Puller is available for the RT System, the FT Handpieces are easier to change. The RT System has one more electrical connection (RT Bushing into Handle) than the FT System. Over time this connection may become worn as a result of constant changing of tip styles, and inconsistent operation may result. Having said this, however, the RT System is far more popular; a resounding testament to its superior design over the competitor’s replaceable tip

system. Note: It is recommended to have a second RT Handle as a back-up.

Colwood Price List

Prices Subject to Change Without Notice

SKU Description Price SKU Description Price

CSP Cub Standard Kit w/RT 153.00 CDP Cub Deluxe Kit w/RT 219.00

CSPF Cub Standard Kit w/FT 162.00 CDPF Cub Deluxe Kit w/FT 250.00

DSP Detailer Standard Kit w/RT 165.00 DDP Detailer Deluxe Kit w/RT 231.00

DSPF Detailer Standard Kit w/FT 174.00 DDPF Detailer Deluxe Kit w/FT 262.00

GSP Galaxy Standard Kit w/RT 279.00 GDP Galaxy Deluxe Kit w/RT 345.00

GSPF Galaxy Standard Kit w/FT 288.00 GDPF Galaxy Deluxe Kit w/FT 376.00

SPSP Super Pro Standard Kit w/RT (inc. 2 RT handles) 214.00 SPDP Super Pro Deluxe Kit w/RT 280.00

SPSPF Super Pro Standard Kit w/FT 207.00 SPDPF Super Pro Deluxe Kit w/FT 295.00

GSK Gourd Standard Kit w/RT 183.00 GDK Gourd Deluxe Kit w/RT 199.00

GSKF Gourd Standard Kit w/FT 195.00 GDKF Gourd Deluxe Kit w/FT 212.00

2000 Cub 63.75 2009 Olympiad w/Hot Knife & Uf Cord 212.00

2000H Cub w/HD Cord 65.75 2004 Super Pro II(UF&HD Cord) 109.00

2001 Detailer 75.75 2006 Super Pro II w/2 UF Cords 109.00

2001H Detailer w/HD Cord 77.75 2004V Super Pro II - 220V 130.50

2001R Detailer w/Hi Power Cord 79.75 CCB25 Colwood Craft Burner 15.99

2001V Detailer - 220V 97.25 CCBTP Tip Package for CCB25 ONLY - 19 Tips 15.95

2013 Galaxy 190.00

BTPF All 3 FT-Ball Tips (B1,B2,B3) Save $5.85 54.00 BTPR All 3 RT Ball Tips (B1,B2,B3) Save $4.85 43.00

STPF 4 FT Shaders (S,SRS,SP,LSS) Save $6.55 58.25 STPR 4 RT Shaders (S,SRS,SP,LSS) Save $4.55 40.25

CTPF 4 FT Circle Tips (.071, .100, .189, .240 dia) Save $8.30 75.50 CTPR 4 FT Circle Tips (.071, .100, .189, .240 dia) Save $6.30 61.50

GTPF Gourd Tip FT-C,E,H,J,S,B2 Save $4.50 85.00 GTPR Gourd Tip RT-C,E,H,J,S,B2 Save $2.75 53.00

VTPF Standard Variety Tip FT-B,C,D,J,S Save $3.75 66.00 VTPR Standard Variety Tip RT-B,C,D,J,S Save $1.75 38.00

VDPF Deluxe Variety Tip FT-B,C,D,J,S,K,MC,MR,C1 Save $6.55 124.00 VDPR Deluxe Variety Tip RT-B,C,D,J,S,K,MC,MR,C1 Save $3.80 74.75

0500 RT Handle 15.95 RI18 1/8" Collet for Dremel, Foredom, RAM, NSK, etc. 22.00

0000C Fixed Handpiece Container 0.75 0860 Plastic Carrying Case w/ storage box 28.50

0020C Replaceable Tip Container 0.50 0860S Storage Box 7.75

0100 Extra Handpiece Clips 1.00 0866 Wood Carrying Case 44.95

0150 Extra Custom Cork Grip 1.25 2010D Hot Knife w/Detail Tip (use with Olympiad only) 55.95

0150F Foam Grip 1.00 2010W Hot Knife w/Writing Tip (use with Olympiad only) 55.95

0151 Cork Heat Shield 1.75 2010TWD Replacement Detail Tip for Hot Knife 20.00

0155 EZ Tip Puller 5.25 2010TWW Replacement Writing Tip for Hot Knife 20.00

0200 Honing Paper 1.50 2011 Heavy Duty Olympiad Cord 18.95

0201 Colwood Cleaning Cloth (for tips) 1.50 2012 Ultra Flex Olympiad Cord (18awg) 16.95

0750 Ultra Flex Cord 12.50 3100 Graphite Paper 18" x 24" 3.95

0801 Heavy Duty Cord (16awg) 14.75 SPC0001 Saral Transfer Paper 12' Roll 12.75

0802 High Power Cord (14awg) 16.75 SPC0020 Sally's Graphite Paper -12 sheets 18" x 24" 17.75

0850 Detail Master Adapter Cord 16.25 BMP Binocular Magnifier w/3 lenses (1.75x,2.25x,2.75x) 24.95

0850H Heavy Duty Detail Master Adapter Cord (16awg) 18.25 BML Binocular Magnifier Light 9.95

0851 Adapter Cord (male x female) 16.25 KDP Kiln Dried Poplar (7-1/4" x 13") 1.50

0852 Razortip Adaptor (Razertip tips w/Colwood unit) 10.00 TCB Tip Cleaning Burrs-Pacakge of 5-Use with 1/8" Collet 7.00

RI116 1/16" Collet for Dremel, Foredom, RAM, NSK, etc. 22.00 SOL High Temp Solder - 1 Foot 2.00

RI332 3/32" Collet for Dremel, Foredom, RAM, NSK, etc. 22.00 MTP Make Your Own Tip Package 13.50

FC1 Great Book of Woodburning 22.95 SW3 Pyrography Workbook 19.95

FC2 Woodburning: Project & Pattern Treasury 24.95 FR1 Carving Patterns by Frank Russell 14.95

FC3 The Art & Craft of Pyrography 19.95 SW5 Pyrography Workshop DVD (2 DVD Set) 24.95

SP1 Learning the Art of Pyrography 12.95 PB1 Pyrography Basics 10.95

Tip Packages

Accessories & Additional Products

Books & Instructional Materials

Deluxe KitsStandard Kits

Control Units

Colwood Price List

SKU Description Price SKU Description Price

0001 FT-A (1/4") Large Round 13.95 0021 RT-A (1/4") Large Round 7.95

0001D FT-DA (3/16") 2 Line Round 19.95 0041 RT-DA (3/16") 2 Line Round 14.95

0001W FT-Large Round Wire Stoning 13.95 0021W RT-Large Round Wire Stoning 7.95

0002 FT-B (1/4") Large Point 13.95 0022 RT-B (1/4") Large Point 7.95

0002R FT-BR (1/4") Rounded Heel 14.95 0022R RT-BR (1/4") Rounded Heel 8.95

0002U FT-B Unsharpened (1/4") Unsharpened 13.95 0022U RT-B Unsharpened (1/4") Unsharpened 7.95

0002G FT - Bob Guge Unsharpened 17.95 0022G RT- Bob Guge Unsharpened 13.95

0003 FT-C (.076") Writing 13.95 0023 RT-C (.076") Writing 7.95

0003M FT-MICRO C (.03) Micro Writing 17.95 0023M RT-MICRO C (.03) Micro Writing 13.95

0003N FT-Needle Point Needle Point 18.95 0023N RT-Needle Point Needle Point 14.95

0004 FT-D (3/16") Small Round 13.95 0024 RT-D (3/16") Small Round 7.95

0004W FT-Small Round Wire Stoning 13.95 0024W RT-Small Round Wire Stoning 7.95

0005 FT-E (1/4") Spade 13.95 0025 RT-E (1/4") Spade 7.95

0006 FT-F (3/16") Spear 13.95 0026 RT-F (3/16") Spear 7.95

0007 FT-G (3/16") Small Point 13.95 0027 RT-G (3/16") Small Point 7.95

0007R FT-GR (3/16") Rounded Heel 14.95 0027R RT-GR (3/16") Rounded Heel 8.95

0007D FT-DG (3/16") 2 Line Point 20.95 0042 RT-DG (3/16") 2 Line Point 17.95

0008 FT-H (3/16") Heavy Point 13.95 0028 RT-H (3/16") Heavy Point 7.95

0008R FT-HR (3/16") Rounded Heel 14.95 0028R RT-HR (3/16") Rounded Heel 8.95

0008GO FT-Pat Godin Pat Godin 17.95 0028GO RT-Pat Godin Pat Godin 11.95

0009 FT-J (1/8") Tight Round 13.95 0029 RT-J (1/8") Tight Round 7.95

0009M FT-Mini J Mini J 15.95 0029M RT-Mini J Mini J 8.95

0010 FT-K (5/32") 1/2 Small Point 13.95 0030 RT-K (5/32") 1/2 Small Point 7.95

0010BA FT-Larry Barth - K Larry Barth 17.95 0030BA RT-Larry Barth - K Larry Barth 11.95

0007BA FT-Larry Barth - G Larry Barth 17.95 0027BA RT-Larry Barth - G Larry Barth 11.95

0010R FT-KR (5/32") Rounded Heel 14.95 0030R RT-KR (5/32") Rounded Heel 8.95

11SP FT-Spoon Shader Spoon Shader 17.95 31SP RT-Spoon Shader Spoon Shader 13.95

0011 FT-S (3/16") Shading 13.95 0031 RT-S (3/16") Shading 7.95

0011S FT-Sm. Round Shader Shading 17.95 0031S RT-Sm. Round Shader Shading 13.95

0011H FT-S w/ Heavy Wire Shading 14.95 0031H RT-S w/ Heavy Wire Shading 8.95

8003S FT-Large Square Shader Shading 14.95 0038S RT-Large Square Shader Shading 8.95

FSHS FT-Small Heavy Shader Shading 17.95 RSHS RT-Small Heavy Shader Shading 13.95

0012 FT-PS (1/8" x 1 3/8") Primary Short 13.95 0033 RT-PS (1/8" x 1 3/8") Primary Short 7.95

0014 FT-M (3/32") Micro 13.95 0035 RT-M (3/32") Micro 7.95

0014R FT-MR (3/32") Rounded Heel 14.95 0035R RT-MR (3/32") Rounded Heel 8.95

0016 FT-SQ (3/32") Square 13.95 0043 RT-SQ (3/32") Square 7.95

0017 FT-LM (3/32" x 1 3/8") Long M 13.95 0044 RT-LM (3/32" x 1 3/8") Long M 7.95

0018 FT-LE (3/32" x 1 3/8") Small Long E 13.95 0045 RT-LE (3/32" x 1 3/8") Small Long E 7.95

0018S FT-Short LE Short LE 13.95 0045S RT-Short LE Short LE 7.95

18Q FT-Quill Tip Quill Tip 17.95 45Q RT-Quill Tip Quill Tip 13.95

8001 FT-FSS (Small 1/8") Fish Scale 16.95 0036 RT-FSS (Small 1/8") Fish Scale 13.95

8002 FT-FSM (Medium 3/16") Fish Scale 16.95 0037 RT-FSM (Medium3/16") Fish Scale 13.95

8003 FT-FSL (Large 1/4") Fish Scale 16.95 0038 RT-FSL (large 1/4") Fish Scale 13.95

8003L FT-Xlg Fish Scale (3/8") Fish Scale 19.95 0038L RT-Xlg Fish Scale (3/8") Fish Scale 17.95

8001C FT-C1 Sm. Calligraphy 13.95 0036C RT-C1 Sm. Calligraphy 7.95

8003C FT-C2 Lg. Calligraphy 13.95 0038C RT-C2 Lg. Calligraphy 7.95

FR071 FT-Circle .071" Dia. Circle 20.95 R071 RT-Circle .071" Dia. Circle Tip 16.95




FTB1 FT-Ball Tip #1 .0394" Ball Tip 19.95 RTB1 RT-Ball Tip #1 .0394" Ball Tip 15.95



0000 FT Handle w/ out tip 10.95 0020 RT Bushing w/ out tip 4.95

3000 6" Nichrome Wire 2.50 3000 6" Nichrome Wire 2.50

0500 15.95

Fixed Tips (FT) Replaceable Tips (RT)

RT Handle (necessary for RT Tips)

Name_________________________________________________________________ Phone______________________________________ Address___________________________________________________________________________________________________________ City______________________________________________________________ State ________ Postal Code_________________________ Email ____________________________________________________________________________________________________________ Credit Card #_____________________________________________ Sec. Code________________________ Exp. Date________________

PART # QTY DESCRIPTION PRICE TOTAL

DOMESTIC SHIPPING AND HANDLING CHARGES

ORDER TOTAL COST $0.01—$9.99 $5.75 $10.00—$49.99 $6.75 $50.00—$99.99 $7.75 $100.00—$199.99 $10.75 Over $200.00 $11.75

Shipping and handling charges apply to the 48 contiguous states. Call or Email for shipping charges to Alaska and Hawaii. You can also visit our web site, www.woodburning.com where you can place your order and make payment through PayPal, the secure payment system. It’s Safe, Simple and Fast.

SUBTOTAL

7 % (NJ RESIDENTS ONLY) TAX

SHIPPING & HANDLING

TOTAL

All international shipments will be shipped via USPS unless requested otherwise and will be charged the actual shipping and han-kling cost plus $3.00 handling per carton. All prices subject to change without notice.

Return & Repair Policy Returns

If you wish to return your order for any reason you must notify Colwood within 10 days after receiving it. Refunds are

only issued for items after they are returned in their original, undamaged condition. When returning an item you should

use the original packing material and ship it via an insured carrier. Colwood is not responsible for any damage in return

shipping. Actual shipping and handling charges are not refundable.

If you wish to return items that were ordered in quantities of 10 or more, there will be 20% restocking fee. There is also

a 20% restocking fee for any Reed & Barton item regardless of quantity.

If you receive an item that you believe was damaged in shipment, you must notify Colwood within 10 days of receipt of

your order. DO NOT throw away the original packing material. Damaged or defective items will be replaced with an

identical product and return shipping will be refunded.

If your equipment was purchased from one of our distributors you should consult them as to their return policy.

Repairs

If your woodburner is in need of repair you should send the unit directly to us; DO NOT try to repair the unit yourself.

Attempting to repair the unit yourself will void any existing warranty. If you send the unit in for repair you should in-

clude the following:

• A brief note explaining the problem

• The control unit (Detailer, Super Pro, Cub, etc.) with handpiece cords attached

• Any RT Handles or FT Handpieces used when experiencing the problem.

• Any RT Tip if applicable

• A daytime phone number where you can be reached

Handpieces and tips cannot be repaired but should be included when sending a unit in for repair as they are sometimes

the cause of the problem.

After our technical staff evaluates the woodburner you will be given a call with an estimate for repair. The vast majority

of repairs cost less than $25.00.

Warranty Information

Renaissance Controller 2 Years*

Renaissance Grinder Motor 6 Months

Galaxy 4 Years*

Olympiad 2 Years*

Super Pro II 2 Years*

Detailer 2 Years*

Cub 2 Years*

All Handpiece Cords 1 Year

Fixed Tip Handpieces 3 Months

RT Handle 3 Months

RT Tips 3 Months

*Does not include handpiece cords, handpieces or tips. These

items are covered under a separate warranty.

If any piece of equipment should be in need of repair, do not at-

tempt to repair it yourself. For the warranty to remain valid ALL

work must be done in our factory. When sending a unit in for re-

pair please include a brief description of the problem and a day-

time phone number.

Colwood 44 Main Street

Farmingdale, NJ 07727 T: 732.938.5556 F: 732.938.9037

made in the u.s.a. - colwood · pdf filethe logical question to ask is, “how much...

Documents