macquarrie panels brochure artwork- side 1 · macquarrie corporation has been operating for over 65...
TRANSCRIPT
About us
MurphyLink ML2000
Macquarrie Corporation has
been operating for over 65
years and has grown from a
company that specialised in
diesel engine reconditioning
to one which now offers a
multitude of products to a wide
range of markets. The company is a second generation family owned
business and has two executive directors - Adrian Macquarrie (Managing
Director) and Russell Macquarrie (Director). The company employs 90 staff
and has an annual turnover of approximately AUD$40 million.
The ML2000 is well-suited to a large range of electronically governed engines that support SAE J1939 CAN communications. The controller is able to monitor a range of parameters transmitted by the ECM and provide text descriptions for a wide range of common fault codes.
The controller is able to dictate desired engine speeds via TSC1 messaging and supports a range of engine and pump protection functions such as warm-up, cool-down and line-fill. It will also dynamically calculate and adjust engine speed in order to regulate a desired parameter (such as pump discharge pressure).
Interfacing with an electronic engine is often a simple procedure, but please be sure to contact us for information on you specific engine and requirements.
Electronic Engine Options
The ML2000 is equally compatible with mechanically governed engines when coupled with a range of sensors to monitor engine health. The controller supports a large number of sensor inputs to monitor and protect common engine parameters and will protect the engine with fully-configurable safe operating ranges.
The two primary applications for mechanical engines are those which involve a fixed run-speed, and those which require variable run speed. Fortunately the ML2000 happily supports both, with the addition of a throttle actuator (the Murphy ATO3069) which provides all of the fine throttle control you would require for functions such as warm-up, cool-down, line-fill and parameter regulation.
Kits are available which include engine sensors and a basic loom which runs from the ML2000 controller to bare ends for customer up-fit. Variable speed kits also include the Murphy ATO3069 throttle actuator, a throttle cable and a powder-coated stand to mount the ML2000 and ATO3069 throttle actuator.
Mechanical Engine Options
Macquarrie Corporation stocks and manufactures a range of engine harnesses to suit most major engine manufacturers, so please be sure to contact us for information on your specific engine and requirements.
Head Office, Melbourne
1620 Sydney RoadCampbellfield, Victoria 3061
Tel (03) 9358 5555Fax (03) 9358 5556
Email [email protected]
Macquarrie Corporation Pty Ltd
Brisbane Branch
1262 Boundary RoadWacol, QLD 4076
Tel (07) 3271 5011Fax (07) 3271 5022
Email [email protected]
Townsville Branch
485 Woolcock StreetGarbutt, QLD 4814
Tel (07) 4725 0799Fax (07) 4725 0811
Email [email protected]
Cairns Branch
101-103 Aumuller StreetPortsmith, QLD 4870
Tel (07) 4035 3442Fax (07) 4035 3443
Email [email protected]
www.macquarrie.com.au
Backed by
65+
Year
s
of MacquarrieExcellence
The Next-Generation Murphy Control PanelAutomatic control, monitoring and regulation for your diesel-powered irrigation or industrial application.
PanelsNon-Weatherproof Weatherproof MurphyLink
Desig
ned & Built in
for Australian conditions
Australia
Backed by
65+
Year
s
of MacquarrieExcellence
Enclosed in PolyCarbonate plastic enclosures that provide excellent resistance against water, dust and mud ingress; the WP-Range of panels are built to last. With a range of panel options covering everything from basic engine protection panels, to the advanced irrigation panels complete with an engine run-down timer and first-out- indication for fault finding, you can be sure to find the right panel at the right price.
Our range of weatherproof panels are designed with Australian conditions in mind.
WeatherproofNon-Weatherproof
Features reference
steel insert steel insert steel insert
Wiring schematics are also provided to assist in installation.
to suit and gauge capillaries of the same length. Wiring schematics are also provided to assist in installation.
mounting options for indoor protected installations. With a range of panel options covering everything from basic engine protection panels, to the advanced irrigation control panels complete with engine run-down timer, you can be sure to find the right panel at the right price.
Our range of non-weatherproof panels provide high-quality and reliable engine monitoring.
Desig
ned & Built in
for ustralian conditio
ns
Australia
Non-Weather
proof
Oilpressure
Watertemp
Airtemp
Tachohrs-alt
Volts Pumppressure
Timeclock
Keyswitch
Shutdownrelay
First out indication
Annun-ciation
Weatherproof
steel insert steel insert steel insert
Controller
Conditions
˚C
steel insert steel insert
Desig
ned & Built in
for ustralian conditio
ns
Australia
Backed by
65+
Year
s
Excellence
Backed by
65+
Year
s
Excellence
Enclosed in PolyCarbonate plastic enclosures that provide excellent resistance against water, dust and mud ingress; the WP-Range of panels are built to last. With a range of panel options covering everything from basic engine protection panels, to the advanced irrigation panels complete with an engine run-down timer and first-out- indication for fault finding, you can be sure to find the right panel at the right price.
Our range of weatherproof panels are designed with Australian conditions in mind.
WeatherproofNon-Weatherproof
Features reference
steel insert steel insert steel insert
Wiring schematics are also provided to assist in installation.
to suit and gauge capillaries of the same length. Wiring schematics are also provided to assist in installation.
mounting options for indoor protected installations. With a range of panel options covering everything from basic engine protection panels, to the advanced irrigation control panels complete with engine run-down timer, you can be sure to find the right panel at the right price.
Our range of non-weatherproof panels provide high-quality and reliable engine monitoring.
Desig
ned & Built in
for ustralian conditio
ns
Australia
Non-Weather
proof
Oilpressure
Watertemp
Airtemp
Tachohrs-alt
Volts Pumppressure
Timeclock
Keyswitch
Shutdownrelay
First out indication
Annun-ciation
Weatherproof
steel insert steel insert steel insert
Controller
Conditions
˚C
steel insert steel insert
Desig
ned & Built in
for ustralian conditio
ns
Australia
Backed by
65+
Year
s
Excellence
Backed by
65+
Year
s
Excellence
Enclosed in PolyCarbonate plastic enclosures that provide excellent resistance against water, dust and mud ingress; the WP-Range of panels are built to last. With a range of panel options covering everything from basic engine protection panels, to the advanced irrigation panels complete with an engine run-down timer and first-out- indication for fault finding, you can be sure to find the right panel at the right price.
Our range of weatherproof panels are designed with Australian conditions in mind.
WeatherproofNon-Weatherproof
Features reference
steel insert steel insert steel insert
Wiring schematics are also provided to assist in installation.
to suit and gauge capillaries of the same length. Wiring schematics are also provided to assist in installation.
mounting options for indoor protected installations. With a range of panel options covering everything from basic engine protection panels, to the advanced irrigation control panels complete with engine run-down timer, you can be sure to find the right panel at the right price.
Our range of non-weatherproof panels provide high-quality and reliable engine monitoring.
Desig
ned & Built in
for ustralian conditio
ns
Australia
Non-Weather
proof
Oilpressure
Watertemp
Airtemp
Tachohrs-alt
Volts Pumppressure
Timeclock
Keyswitch
Shutdownrelay
First out indication
Annun-ciation
Weatherproof
steel insert steel insert steel insert
Controller
Conditions
˚C
steel insert steel insert
Desig
ned & Built in
for ustralian conditio
ns
Australia
Backed by
65+
Year
s
Excellence
Backed by
65+
Year
s
Excellence
About us
MurphyLink ML2000
Macquarrie Corporation has
been operating for over 65
years and has grown from a
company that specialised in
diesel engine reconditioning
to one which now offers a
multitude of products to a wide
range of markets. The company is a second generation family owned
business and has two executive directors - Adrian Macquarrie (Managing
Director) and Russell Macquarrie (Director). The company employs 90 staff
and has an annual turnover of approximately AUD$40 million.
The ML2000 is well-suited to a large range of electronically governed engines that support SAE J1939 CAN communications. The controller is able to monitor a range of parameters transmitted by the ECM and provide text descriptions for a wide range of common fault codes.
The controller is able to dictate desired engine speeds via TSC1 messaging and supports a range of engine and pump protection functions such as warm-up, cool-down and line-fill. It will also dynamically calculate and adjust engine speed in order to regulate a desired parameter (such as pump discharge pressure).
Interfacing with an electronic engine is often a simple procedure, but please be sure to contact us for information on you specific engine and requirements.
Electronic Engine Options
The ML2000 is equally compatible with mechanically governed engines when coupled with a range of sensors to monitor engine health. The controller supports a large number of sensor inputs to monitor and protect common engine parameters and will protect the engine with fully-configurable safe operating ranges.
The two primary applications for mechanical engines are those which involve a fixed run-speed, and those which require variable run speed. Fortunately the ML2000 happily supports both, with the addition of a throttle actuator (the Murphy ATO3069) which provides all of the fine throttle control you would require for functions such as warm-up, cool-down, line-fill and parameter regulation.
Kits are available which include engine sensors and a basic loom which runs from the ML2000 controller to bare ends for customer up-fit. Variable speed kits also include the Murphy ATO3069 throttle actuator, a throttle cable and a powder-coated stand to mount the ML2000 and ATO3069 throttle actuator.
Mechanical Engine Options
Macquarrie Corporation stocks and manufactures a range of engine harnesses to suit most major engine manufacturers, so please be sure to contact us for information on your specific engine and requirements.
Head Office, Melbourne
1620 Sydney RoadCampbellfield, Victoria 3061
Tel (03) 9358 5555Fax (03) 9358 5556
Email [email protected]
Macquarrie Corporation Pty Ltd
Brisbane Branch
1262 Boundary RoadWacol, QLD 4076
Tel (07) 3271 5011Fax (07) 3271 5022
Email [email protected]
Townsville Branch
485 Woolcock StreetGarbutt, QLD 4814
Tel (07) 4725 0799Fax (07) 4725 0811
Email [email protected]
Cairns Branch
101-103 Aumuller StreetPortsmith, QLD 4870
Tel (07) 4035 3442Fax (07) 4035 3443
Email [email protected]
www.macquarrie.com.au
Backed by
65+
Year
s
of MacquarrieExcellence
The Next-Generation Murphy Control PanelAutomatic control, monitoring and regulation for your diesel-powered irrigation or industrial application.
PanelsNon-Weatherproof Weatherproof MurphyLink
Desig
ned & Built in
for Australian conditions
Australia
Backed by
65+
Year
s
of MacquarrieExcellence
About us
MurphyLink ML2000
Macquarrie Corporation has
been operating for over 65
years and has grown from a
company that specialised in
diesel engine reconditioning
to one which now offers a
multitude of products to a wide
range of markets. The company is a second generation family owned
business and has two executive directors - Adrian Macquarrie (Managing
Director) and Russell Macquarrie (Director). The company employs 90 staff
and has an annual turnover of approximately AUD$40 million.
The ML2000 is well-suited to a large range of electronically governed engines that support SAE J1939 CAN communications. The controller is able to monitor a range of parameters transmitted by the ECM and provide text descriptions for a wide range of common fault codes.
The controller is able to dictate desired engine speeds via TSC1 messaging and supports a range of engine and pump protection functions such as warm-up, cool-down and line-fill. It will also dynamically calculate and adjust engine speed in order to regulate a desired parameter (such as pump discharge pressure).
Interfacing with an electronic engine is often a simple procedure, but please be sure to contact us for information on you specific engine and requirements.
Electronic Engine Options
The ML2000 is equally compatible with mechanically governed engines when coupled with a range of sensors to monitor engine health. The controller supports a large number of sensor inputs to monitor and protect common engine parameters and will protect the engine with fully-configurable safe operating ranges.
The two primary applications for mechanical engines are those which involve a fixed run-speed, and those which require variable run speed. Fortunately the ML2000 happily supports both, with the addition of a throttle actuator (the Murphy ATO3069) which provides all of the fine throttle control you would require for functions such as warm-up, cool-down, line-fill and parameter regulation.
Kits are available which include engine sensors and a basic loom which runs from the ML2000 controller to bare ends for customer up-fit. Variable speed kits also include the Murphy ATO3069 throttle actuator, a throttle cable and a powder-coated stand to mount the ML2000 and ATO3069 throttle actuator.
Mechanical Engine Options
Macquarrie Corporation stocks and manufactures a range of engine harnesses to suit most major engine manufacturers, so please be sure to contact us for information on your specific engine and requirements.
Head Office, Melbourne
1620 Sydney RoadCampbellfield, Victoria 3061
Tel (03) 9358 5555Fax (03) 9358 5556
Email [email protected]
Macquarrie Corporation Pty Ltd
Brisbane Branch
1262 Boundary RoadWacol, QLD 4076
Tel (07) 3271 5011Fax (07) 3271 5022
Email [email protected]
Townsville Branch
485 Woolcock StreetGarbutt, QLD 4814
Tel (07) 4725 0799Fax (07) 4725 0811
Email [email protected]
Cairns Branch
101-103 Aumuller StreetPortsmith, QLD 4870
Tel (07) 4035 3442Fax (07) 4035 3443
Email [email protected]
www.macquarrie.com.au
Backed by
65+
Year
sof Macquarrie
Excellence
The Next-Generation Murphy Control PanelAutomatic control, monitoring and regulation for your diesel-powered irrigation or industrial application.
PanelsNon-Weatherproof Weatherproof MurphyLink
Desig
ned & Built in
for Australian conditions
Australia
Backed by
65+
Year
s
of MacquarrieExcellence