macbook pro 13' unibody mid 2012 airport/bluetooth cable ...€¦ · step 3 — battery...
TRANSCRIPT
![Page 1: MacBook Pro 13' Unibody Mid 2012 AirPort/Bluetooth Cable ...€¦ · Step 3 — Battery Connection Use the edge of a spudger to pry the battery connector upwards from its socket on](https://reader034.vdocuments.mx/reader034/viewer/2022050604/5fabc943e01edd0ccd2f145d/html5/thumbnails/1.jpg)
MacBook Pro 13" Unibody Mid 2012AirPort/Bluetooth Cable Replacement
Replace a broken AirPort/Bluetooth cable on your Mid 2012 MacBook Pro 13" Unibody.
Written By: Andrew Optimus Goldheart
MacBook Pro 13" Unibody Mid 2012 AirPort/Bluetooth Cable Replacement Draft: 2018-07-23Guide ID: 10364 -
This document was generated on 2019-09-20 02:04:39 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6
![Page 2: MacBook Pro 13' Unibody Mid 2012 AirPort/Bluetooth Cable ...€¦ · Step 3 — Battery Connection Use the edge of a spudger to pry the battery connector upwards from its socket on](https://reader034.vdocuments.mx/reader034/viewer/2022050604/5fabc943e01edd0ccd2f145d/html5/thumbnails/2.jpg)
INTRODUCTION
Use this guide to replace a broken AirPort/Bluetooth cable.
TOOLS:Phillips #00 Screwdriver (1)Spudger (1)
PARTS:MacBook Pro 13" Unibody (Early
2011/Late 2011/Mid 2012)Airport/Bluetooth Cable (1)
MacBook Pro 13" Unibody Mid 2012 AirPort/Bluetooth Cable Replacement Draft: 2018-07-23Guide ID: 10364 -
This document was generated on 2019-09-20 02:04:39 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 6
![Page 3: MacBook Pro 13' Unibody Mid 2012 AirPort/Bluetooth Cable ...€¦ · Step 3 — Battery Connection Use the edge of a spudger to pry the battery connector upwards from its socket on](https://reader034.vdocuments.mx/reader034/viewer/2022050604/5fabc943e01edd0ccd2f145d/html5/thumbnails/3.jpg)
Step 1 — Lower Case
Remove the following ten screws:
Three 14.4 mm Phillips #00screws
Three 3.5 mm Phillips #00 screws
Four 3.5 mm shouldered Phillips#00 screws
When replacing the small screws,align them perpendicular to theslight curvature of the case (theydon't go straight down).
Step 2
Use your fingers to pry the lower case away from the body of the MacBook near the vent.
Remove the lower case.
MacBook Pro 13" Unibody Mid 2012 AirPort/Bluetooth Cable Replacement Draft: 2018-07-23Guide ID: 10364 -
This document was generated on 2019-09-20 02:04:39 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 6
![Page 4: MacBook Pro 13' Unibody Mid 2012 AirPort/Bluetooth Cable ...€¦ · Step 3 — Battery Connection Use the edge of a spudger to pry the battery connector upwards from its socket on](https://reader034.vdocuments.mx/reader034/viewer/2022050604/5fabc943e01edd0ccd2f145d/html5/thumbnails/4.jpg)
Step 3 — Battery Connection
Use the edge of a spudger to pry the battery connector upwards from its socket on the logic board.
It is useful to pry upward on both short sides of the connector to "walk" it out of its socket. Becareful with the corners of the connectors, they can be easily broken off.
Step 4
Bend the battery cable slightly awayfrom its socket on the logic board soit does not accidentally connect itselfwhile you work.
MacBook Pro 13" Unibody Mid 2012 AirPort/Bluetooth Cable Replacement Draft: 2018-07-23Guide ID: 10364 -
This document was generated on 2019-09-20 02:04:39 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 6
![Page 5: MacBook Pro 13' Unibody Mid 2012 AirPort/Bluetooth Cable ...€¦ · Step 3 — Battery Connection Use the edge of a spudger to pry the battery connector upwards from its socket on](https://reader034.vdocuments.mx/reader034/viewer/2022050604/5fabc943e01edd0ccd2f145d/html5/thumbnails/5.jpg)
Step 5 — AirPort/Bluetooth Cable
Use the flat end of a spudger to prythe AirPort/Bluetooth connector upfrom its socket on the logic board.
Step 6
Peel back the piece of EMI tapecovering the AirPort/Bluetooth cableconnector above the optical drive.
MacBook Pro 13" Unibody Mid 2012 AirPort/Bluetooth Cable Replacement Draft: 2018-07-23Guide ID: 10364 -
This document was generated on 2019-09-20 02:04:39 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 6
![Page 6: MacBook Pro 13' Unibody Mid 2012 AirPort/Bluetooth Cable ...€¦ · Step 3 — Battery Connection Use the edge of a spudger to pry the battery connector upwards from its socket on](https://reader034.vdocuments.mx/reader034/viewer/2022050604/5fabc943e01edd0ccd2f145d/html5/thumbnails/6.jpg)
To reassemble your device, follow these instructions in reverse order.
Step 7
Use the tip of a spudger to lift theAirPort/Bluetooth connector off of itssocket on the AirPort/Bluetoothboard.
Step 8
Remove the AirPort/Bluetooth cablefrom the machine.
MacBook Pro 13" Unibody Mid 2012 AirPort/Bluetooth Cable Replacement Draft: 2018-07-23Guide ID: 10364 -
This document was generated on 2019-09-20 02:04:39 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 6