Gurgaon (Linux release 2.6.9-78.0.1.ELsmp #1 SMP Tue Jul 22 18:11:48 EDT 200 8) (3) login: gomcr Password: Last login: Wed Aug 7 15:26:18 from 10.147.204.106 -bash-3.00$ telnet 10.131.152.9 Trying 10.131.152.9... Connected to 10.131.152.9 (10.131.152.9). Escape character is '^]'. (none) login: zte Password: Processing /etc/profile... Done # /ushell -> Please input password! -> *** -> Login success!! ushell tool menu: -----------------------------------------------------------------------------'ps' or 'PS' list process run on the board 'pr xxx' or 'PR xxx' take over xxx process printf info 'npr xxx' or 'NPR xxx' not take over xxx process printf info 'db xxx' or 'DB xxx' debug xxx process printf info 'ndb xxx' or 'NDB xxx' not debug xxx process printf info 'pad xxx' or 'PAD xxx' debug and take over xxx process printf info 'npad xxx' or 'NPAD xxx'not debug and take over xxx process printf info 'pall' or 'PALL' display current debug and take over info 'Q' or 'q' cancel all process debug and printf info 'exit' or 'EXIT' cancel ushell xxx is process id you want to debug or take over printf inf o -----------------------------------------------------------------------------$$pad 657 $$ [657] ushell enter print mod ushell enter debug mod $$brsarp [657] [ begin to excel fun:brsarp ] ARP Info On Port: 0, vlan: ----, (Statue:UP) This SubPort Arp Num is 0. ARP Info On Port: 0, vlan: 1006, (Statue:UP) 0: IP: Haddr: 00-00-5E-00-01-01, 1: IP: Haddr: 00-15-EB-9D-A3-2A, This SubPort Arp Num is 2. ARP Info On Port: 0, vlan: 1506, (Statue:UP) 0: IP: Haddr: 00-00-00-00-00-00, 1: IP: Haddr: 00-15-EB-9D-A3-2A, This SubPort Arp Num is 2. ARPF_INUSE ARPF_ALWAYS_USEARPF_WAITING ARPF_ALWAYS_USEvalue = 28(0x1c) [ end to excel fun:brsarp $$]