m710ct06enau_new_09_27_07.qxp:mff australian catalog

Fixings and Supports for Plumbing, Fire

Protection, Heating, Ventilation and

Air ConditioningAsia/Australia

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:49 PM Page A

Singapore: 65-6-268-3433 / Australia: 61-2-9479-8500www.erico.com

DESIGNSAll dimensions are ± 5% and product design and specifications are subject to change without notice.

DESIGN AND MANUFACTURINGSupports and hangers may be manufactured in conformance with one or more of the following:Manufacturers Standardization Society MSS-SP-58Federal Specification WW-H-171Factory Mutual Research CorporationUnderwriters Laboratories, Inc.National Fire Protection Association NFPA®-13 , NFPA 24ANSI Code for Pressure Piping

TERMS AND CONDITIONS OF SALEFor ordering, terms and conditions of sale, please consult our current price guide.

WARNING ERICO products shall be installed and used only as indicated in ERICO’s product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTYERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages,defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER’S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITYERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.

ANSI is a registered trademark of American National Standards InstituteASTM is a registered trademark of ASTM InternationalUL is a is a registered trademark of Underwriters Laboratories, Inc.ASME is a is a registered trademark of American Society of Mechanical EngineersNFPA is a registered trademark of National Fire Protection Association

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:49 PM Page B

TABLE OF CONTENTS


Made to Order Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page XXI

1 Pipe Clamps - Rubber Lined/Insulated . . . . . . . . . . . . . . . . . Page 1

2 Pipe Clamps - Unlined/Uninsulated . . . . . . . . . . . . . . . . . . . . Page 7

3 Sprinkler Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 23

4 Clevis Hangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

5 Riser Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 43

6 Strut Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 47

7 Medium Duty Pipe Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . Page 55

8 Heavy Duty Pipe Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 59

9 Domestic Pipe Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 63

10 Ducting Support Products . . . . . . . . . . . . . . . . . . . . . . . . . Page 77

11 Plastic Pipe Fixings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 83

12 Beam Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 87

13 CADDY Spring Steel Fixing & Fasteners . . . . . . . . . . . . . . Page 91

14 CADDY® SPEED LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 123

15 Sound Insulation Products . . . . . . . . . . . . . . . . . . . . . . . . Page 129

16 CADDY® PYRAMID Pipe & Equipment Supports . . . . . . . Page 133

17 C-Profile System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 139

18 Strut, Fittings & Accessories. . . . . . . . . . . . . . . . . . . . . . . Page 145

19 Installation Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 167

20 Stainless Steel Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 185

21 Guides and Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 197

22 CADDY® Seismic Sway Bracing . . . . . . . . . . . . . . . . . . . . Page 213

22 Technical Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 221

23 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 233

N

W E

S

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:49 PM Page C

PIPE CLAMPS - RUBBER LINED / INSULATED


I

243 250 240LF HDPCI

Page 2 Page 3 Page 5

NEWNEW

250 - Steel ADJ - Steel ADJ - Steel ADJ - Copper

Page 9 Page 10 Page 10 Page 11

Page 12

ADJ - PVC NUT - Copper NUT - PVC PNG - PVC


Page 15

SAD - Copper SAD - Steel SAD - PVC SOB - Copper


1

PIPE CLAMPS - UNLINED / UNINSULATED 2

N

W E

S

NEWNEW NEWNEW

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:49 PM Page I

PIPE CLAMPS - UNLINED / UNINSULATED

IISingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com

2

SOB - PVC TPC - Copper TPC - Steel TPC - PVC


TPC - PVC TPC - FRC HDPC


SPRINKLER SUPPORTS 3

EPB FCN CNC HDPC NI


401 CADDY® SLOT LOCK CADDY® EZ RISER CDS

Page 28 Page 29 Page 30 Page 31 N

W E

S

NEWNEW NEWNEW

NEWNEWNEWNEWNEWNEW

NEWNEW

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:49 PM Page II

SPRINKLER SUPPORTS


III

3

CLS CTC ERIC1 U-bolt


107 - For CPVC pipe 108 - For CPVC pipe 109 - For CPVC pipe SO - For CPVC pipe


CLEVIS HANGERS 4

401 CADDY® SLOT LOCK 402 - Clevis for copper pipe


RISER CLAMPS

CADDY® EZ RISER 511 - Riser for copper pipe 700


5

N

W E

S

NEWNEW NEWNEWNEWNEW NEWNEW

NEWNEW NEWNEW

NEWNEWNEWNEW NEWNEW

NEWNEWNEWNEW NEWNEW

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:50 PM Page III

STRUT CLIPS

IVSingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com

6STRUT CLIPS 6

MEDIUM DUTY PIPE CLAMPS 7

ERIC15 ERIC16 ERIC18


HEAVY DUTY PIPE CLAMPS 8

ERIC30 ERIC31

Page 60 Page 61

RIGD TCC CHC - For Copper pipe CHC - For Steel pipe


CHC - For PVC pipe CHC - For P/PVC pipe

Page 52 Page 53

N

W E

S

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:50 PM Page IV


V

DOMESTIC PIPE CLIPS 9

BRC CU-HF CU-SAD CUS


FFC SPH HNG HST


SOW SPC - For Copper pipe SPC - For PVC pipe SPC - For P/PVC pipe


WB WB-PPC WB-ADJ


N

W E

S

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:50 PM Page V

DUCTING SUPPORT PRODUCTS

VISingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com

10

MACRO V ISO EQV EQVS EQZS


EQLS

Page 80

EQ-ZAB

Page 81

PLASTIC PIPE FIXINGS 11

CADDY® SUPERKLIP TSM TSMI


N

W E

S

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:50 PM Page VI

BEAM CLAMPS


VII

12

SPRING STEEL FIXING & FASTENERS 13

H H-i H-ST


H-CT

Page 95

H-CTB H-MA H-Ti/T


H-S

Page 98

H-SR H-MSM H-PSM


EM

0

TK300 BTK310 HB2


315

Page 90

N

W E

S

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:51 PM Page VII

SPRING STEEL FIXING & FASTENERS

VIIISingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com

13

N

W E

S

EM-SM EM-P EM-M VF


VAFT J J-MA J-Ti/T


EBC EBC-MSM EBC-M EBC_P


INC8 122 122 MA 122 Ti


M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:51 PM Page VIII



IX

122 T10 EER EERS EER-Ti/T


EER-MA TDH TDHP MK2 HW


WDC/WDC-M GTD PW2 PW2 Ti/T


4Z34-CTS K AB Ti/T


13

N

W E

S

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:51 PM Page IX


XSingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com

13

B-Ti/T MAB MEBN


N

W E

S

CADDY® SPEED LINK

CADDY® SPEED LINK CADDY® SPEED LINK LD Tools & Accessories

Page 120 Page 121 Page 122-123

SOUND INSULATION PRODUCTS 15

SBFF SGBC SBMF SBMK


SBFK

Page 128

KIT U SILENT

Page 128

14

NEWNEW

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:52 PM Page X


XI

CADDY® PYRAMID 16

CADDY® PYRAMID 50 CADDY® PYRAMID 25 CADDY® PYRAMID 150CADDY® PYRAMID 300

Page 130 Page 131

CADDY® PYRAMID 600

Page 132 - 133Page 132

C-PROFILE SYSTEM

EOL C-EOL CFIX CFIX


ECN EOL/EO

Page 139

KP

Page 139

ADK

0

17

NEWNEW NEWNEW NEWNEW



NEWNEW

N

W E

S

NEWNEW

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:52 PM Page XI

STRUT, FITTINGS & ACCESSORIES

XIISingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com

18

N

W E

S

41 x 41 41 x 21 Slotted Angle KH


ECB

Page 146

ISSP

Page 146

CADDY® SLICK NUT

Page 147

STS

Page 148

UM UA UD ZTA605

Page 149 Page 149 0 Page 150

ADK 421

Page 151

Profile Capping

Page 151

ZTA601

Page 151

ZT606

Page 152

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:52 PM Page XII



XIII

18

N

W E

S

ZZ704 INC8 ZEA110


ZEA100

Page 153

ZEA102 ZEA104 ZEA106


ZEA107

Page 154

ZEA108 ZEA109 ZWA 200


ZWA202

Page 156

ZWA209

Page 157

ZWA203 ZWA205 ZWA207


M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:53 PM Page XIII


XIVSingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com

18

N

W E

S

ZZA702 ZSA301 ZUA400 ZUA401


ZWA214

Page 159

ZWA215

Page 160

ZSA304

Page 160

ZGA501

Page 160

ZZA701 P11 P13 ROL10


ROL11

Page 162

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:53 PM Page XIV

INSTALLATION ACCESSORIES


XV

19

N

W E

S

ISN IHT VDF TMN


LA

Page 166

ANG

Page 167

HSCR

Page 167

CMP

Page 168

Rod Coupling D1 D2 D3


E2

Page 170

Rod Connectors

Page 170

ERIC

Page 171

Strike Anchor

Page 171

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:54 PM Page XV


XVISingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com

19

N

W E

S

Ferrules NUT Threaded Rod Isolation Rubber


Hex Head Set Screws

Page 175

Square Washer

Page 175

Suredrive Anchor

Page 176

VMP

Page 176

Hardware Washers Hardware Washers ESGP MSP


Barrnog/TSGBHD

Page 178

TSGB

Page 179

TPC

Page 179

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:54 PM Page XVI

STAINLESS STEEL RANGE


XVII

20

N

W E

S

CADDY® ERISTRUT CADDY ERISTRUT

Page 183 Page 183

CHC

Page 185-186

SPC

CADDY® MACROFIX

Page 190

UA

Pages 184

UM

Page 184

WB

105

Page 191

406

Page 192

CADDY® MACROFIX NI

Page 189Page 187 Page 188

H-2

Page 193

H-CTB-2

Page 193

M-MSM-2

Page 194

EM-2

Page 194

EM-M-2

Page 195

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:54 PM Page XVII


XVIIISingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com

20

GUIDES & ROLLERS 21

N

W E

S

ROL12 ROL13 ROL14 ROL15


Threaded Rod Hex Head Set Screws

Page 195 Page 195

HSCR

Pages 196

NUT

Page 196

610

Page 202

615

Page 203

PESMO

Page 204

PESHO

Page 205

PESMOS

Page 206

PESHOS

Page 207

PESMT

Page 208

PESHT

Page 209

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:55 PM Page XVIII

GUIDES & ROLLERS


XIX

21

CADDY® SEISMIC SWAY BRACING 22

PESHTS

Page 211

PESMTS

Page 210

N

W E

S

TP220 TP225 TP225G TP225A


TP230

Page 216

TP230G

Page 216

TP235

Page 217

TP240

Page 217

TP280

Page 218

SB55

Page 219

CADDY® EZ BRACE

0

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:55 PM Page XIX

XXSingapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com

M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:55 PM Page XX


When you’re looking for a wide variety of high-quality, made-to-order clamps from a trusted source, turn to ERICO®.Adjustable and stand-off bracket clamps are available with plain, hot-dip galvanized and polyester powder coated finishesand can accommodate pipe sizes up to 315 mm. Or you can choose from saddle or two-piece clamps to accommodatepipe sizes up to 1,200 mm. A wide variety of other configurations are also available upon request.

ERICO offers short lead times on most made-to-order products and can provide product testing and material certificationupon request. And best of all, your custom products are easy to order! Simply call your ERICO representative or visitwww.erico.com and download the Made-to-Order Request for Pricing Form.

XXI

MADE TO ORDER PRODUCTS

Pipe range: up to 315 mm OD

Materials thickness available: 3 mm & 6 mm

Material types available: Mild steel & 316 Stainless Steel (SS)

Material finishes: Plain (PL), Hot Dip Galvanised (HDG) & polyester powder coated (PPC)

Clamp Type


Materials thickness available: 3 mm & 6 mm



Adjustable

Saddle

Stand Off Bracket

Two Piece Clips


Materials thickness available: 3 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm & 20 mm




Materials thickness available: 3 mm, 6 mm, 8 mm, 10 mm, 12 mm, 16 mm & 20 mm



M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:55 PM Page XXI


1Singapore: 65-6-268-3433 / Australia: 61-2-9751-8500www.erico.com

243 250 240LF HDPCI


1


M710CT06ENAU_new_09_27_07.qxp:MFF Australian Catalog 11/15/07 1:55 PM Page 1



2

Ø d W x T Sc x L Max. Rec.(in) (mm) (mm) Load (N)

400063 1/4 12-14 20 x 1.5 M6 x 25 1000 400064 3/8 15-19 20 x 1.5 M6 x 25 1000400065 1/2 21-23 20 x 1.5 M6 x 25 1000400066 3/4 26-28 20 x 1.5 M6 x 25 1000400067 1 32-35 20 x 1.5 M6 x 25 1000400068 1-1/4 40-43 20 x 1.5 M6 x 30 1000400069 44-49 20 x 1.5 M6 x 30 1300400070 1-1/2 48-52 20 x 1.5 M6 x 30 1300589350 54-58 20 x 2.0 M6 x 30 1300400071 2 57-61 20 x 2.0 M6 x 30 1300400072 63-67 20 x 2.0 M6 x 30 1300400073 70-73 20 x 2.0 M6 x 35 1300400074 2-1/2 74-80 20 x 2.0 M6 x 35 1300400075 3 83-91 20 x 2.0 M6 x 35 1300400076 101-106 23 x 2.5 M8 x 40 2200400077 4 108-114 23 x 2.5 M8 x 40 2200

CADDY® SUPERFIX 243 M8/M10

1

One piece pipe clip with M8/M10 combi boss• Easy to install locking mechanism• EPDM rubber insulation for sound reduction compliant

with DIN 4109, average degree of improvement: 20dB• Cylinder head screw M6 (+ 101 mm = M8) with combination

head (slot & crosshead)• Steel profile (W x T)• For pipe diameter from 12 to 114 mm• Temperature rating from -50°C up to +110°C• Fire rating B2 acc. to DIN EN 13501-1:E• Closed cap nut prevents rod damage to hanger• Finish: Electro-zinc plated (EG)

- 50°/+110°BBB22DIN EN13501-

1:E

d

T

W

Sc

L

M8/M10

NEWNEW





596460 1/4 12-15 20 x 1.5 M6 x 20 1000596470 3/8 15-19 20 x 1.5 M6 x 20 1000596480 1/2 20-24 20 x 1.5 M6 x 20 1000596490 3/4 25-30 20 x 1.5 M6 x 20 1000596500 1 32-37 20 x 1.5 M6 x 20 1000596510 1-1/4 40-45 20 x 1.5 M6 x 25 1000595860 1-1/2 48-53 20 x 2.0 M6 x 25 1300595870 54-58 20 x 2.0 M6 x 25 1300595880 2 59-63 20 x 2.0 M6 x 25 1300595885 62-64 20 x 2.0 M6 x 25 1300596450 68-73 20 x 2.0 M6 x 25 1300595890 2-1/2 75-80 20 x 2.0 M6 x 25 1300595900 82-86 20 x 2.0 M6 x 25 1300595910 3 89-91 20 x 2.0 M6 x 25 1300595920 95-103 23 x 2.5 M6 x 25 1300595930 4 108-116 23 x 2.5 M8 x 25 2200595940 121-127 23 x 2.5 M8 x 25 2200595950 5 135-141 23 x 2.5 M8 x 25 2200595955 146-155 23 x 2.5 M8 x 25 2200595960 159-162 23 x 2.5 M8 x 25 2200595970 6 165-168 23 x 2.5 M8 x 25 2200

2 screw pipe clip with M8/M10 combi boss• EPDM rubber insulation for sound reduction compliant

with DIN 4109, average degree of improvement: 20dB• M6 multi-function screw with hexagonal combination head

(slot & crosshead), c/w retaining washer• Steel profile (W x T)• For pipe diameter from 12 mm to 168 mm• Temperature rating from -50°C up to +110°C• Fire rating B2 acc. to DIN EN 13501-1:E• Closed cap nut prevents rod damage to hanger• Finish: Electro-zinc plated (EG)

CADDY® MACROFIX 250 M8/M10

1

d

Sc

L

M8/M10

T

W

- 50°/+110°BB22DIN EN13501-

1:E




4

1CADDY® MACROFIX 240LF

2 screw pipe clip with M8/M10 combi boss for HDPE pipe• HDPE pipes from 16 mm to 160 mm• Easy-to-install closing mechanism • Multi-function screws with hexagonal combination

head (slot & crosshead)• Special rubber lining for plastic pipes to allow expansion

or contraction of the pipe• Plastic washers between the flanges for adjusting the

pipe clamp as a fixpoint or slide • Up to 1500 (N) load capacity • Suits M8/M10 rod• EPDM rubber insulation for sound reduction compliant DIN 4109,

average degree of improvement: 19dB• Temperature range from -50°C to +100°C• Fire rating DIN EN 13501-1:E• Closed cap nut prevents rod damage to hanger• Finish: Electro-zinc plated (EG)

Nom. Actual Pipe D W x T Sc x L Max. Rec.Pipe Size OD (mm) (mm) (mm) Load (N)

595035 10 16 14-19 20 x 1.5 M6 x 25 900595036 15 20 18-23 20 x 1.5 M6 x 25 900595037 20 25 23-28 20 x 1.5 M6 x 25 900595038 25 32 30-35 20 x 1.5 M6 x 25 900595039 32 40 38-43 20 x 1.5 M6 x 25 900595040 40 50 48-53 20 x 2.0 M6 x 30 900595041 56 54-59 20 x 2.0 M6 x 30 900595042 50 63 60-66 20 x 2.0 M6 x 30 900595043 65 75 73-78 20 x 2.0 M6 x 30 900595044 80 90 88-93 20 x 2.0 M6 x 30 900595045 100 110 108-113 23 x 2.5 M8 x 40 1500595046 125 125 123-128 23 x 2.5 M8 x 40 1500595047 140 138-143 23 x 2.5 M8 x 40 1500595048 150 160 158-163 23 x 2.5 M8 x 40 1500

Sc

L

M8/M10

d

T

W

NEWNEW

- 50°/+110°BB22DIN EN13501-

1:E




1

d

Sc

L

RS

B

T

Nom. Actual Pipe d W x T RS Sc x L Max. Rec.Pipe Size OD (mm) (mm) (mm) Load (N)

577034 15 21.3 19 - 23 30 x 2.5 M8/M10 M6 x 30 2000577035 20 26.9 24 - 28 30 x 2.5 M8/M10 M6 x 30 2000577037 25 33.7 33 - 37 30 x 2.5 M8/M10 M6 x 30 2000577038 32 42.4 40 - 45 30 x 2.5 M8/M10 M6 x 30 2000577039 40 48.3 47 - 52 30 x 2.5 M8/M10 M6 x 30 2000577041 50 60.3 60 - 65 30 x 2.5 M8/M10 M8 x 40 2000577043 65 76.1 73 - 78 30 x 3.0 M10/M12 M8 x 40 3500577045 80 88.9 88 - 93 30 x 3.0 M10/M12 M8 x 40 3500577048 100 114.3 108 - 116 30 x 3.0 M10/M12 M8 x 40 3500577052 125 139.7 138 - 145 40 x 4.0 M12/M16 M10 x 40 5000577055 150 165.1 165 - 171 40 x 4.0 M12/M16 M10 x 40 5000577061 200 219.1 219 - 225 40 x 4.0 M16/M20 M12 x 40 8500577066 250 273 265- 273 40 x 4.0 M16/M20 M12 x 40 10000

Suspended steel pipe services• Steel pipes from 15 mm to 250 mm• Multi-function screws with hexagonal/slotted combination

head (up to 100)• Fillet welded connector nut• Fastener nuts spot welded• EPDM rubber insulation for sound reduction compliant

DIN 4109, average degree of improvement: 22dB• Temperature range from -50°C to +110°C• Fire rating DIN EN 13501-1:E• Up to 10000 (N) load capacity • Finish: Electro-zinc plated (EG)

HDPCI

NEWNEW

- 50°/+110°BB22DIN EN13501-

1:E



6




250 ADJ - Steel ADJ - Steel ADJ - Copper


ADJ - PVC NUT - Copper NUT - PVC PNG - PVC


SAD - Copper SAD - Steel SAD - PVC SOB - Copper


SOB - PVC TPC - Copper TPC - Steel TPC - PVC


2




8

TPC - PVC TPC - FRC HDPC


2

NEWNEW




2

2 screw pipe clip with M8/M10 boss• Multi-function screw with hexagonal combination head

(slot & crosshead), c/w retaining washer• Steel profile (W x T)• Closed cap nut helps prevent rod damage to hanger• Finish: Electro-zinc plated (EG)

CADDY® MACROFIX 250 M8/M10


596220 1/2 20-26 20 x 1.5 M6 x 20 1000596230 3/4 23-30 20 x 1.5 M6 x 20 1000596250 1 33-40 20 x 1.5 M6 x 20 1000596260 1-1/4 41-47 20 x 1.5 M6 x 20 1000596270 1-1/2 48-54 20 x 2.0 M6 x 25 1000596280 2 56-62 20 x 2.0 M6 x 25 1300596290 62-69 20 x 2.0 M6 x 25 1300596300 67-71 20 x 2.0 M6 x 25 1300596310 2-1/2 69-78 20 x 2.0 M6 x 25 1300596320 3 85-91 20 x 2.0 M6 x 25 1300596360 4 108-116 23 x 2.5 M8 x 25 1300596380 129-140 23 x 2.5 M8 x 25 2200596410 6 159-168 23 x 2.5 M8 x 25 2200

d

Sc

L

M8/M10

T

W




10

2Adjustable Clamp - ADJ for Steel Pipe

Suspend horizontal & vertical pipe services• Adjustable bracket sizes 15 nb to 150 nb• Adjustable yoke 48 mm to 65 mm• Double bolted• Suits up to M8 rod• Finish: Hot dip galvanised (HDG)

Pipe Size Actual Pipe RS W x T B Fastener Max. Rec.(nb) OD (mm) (mm) (mm) Load (N)

ADJ-015-GWIR-HDG 15 21.3 M8 20 x 3.0 80 M8 x 25 1500ADJ-020-GWIR-HDG 20 26.9 M8 20 x 3.0 86 M8 x 25 1500ADJ-025-GWIR-HDG 25 33.7 M8 20 x 3.0 93 M8 x 25 1500ADJ-032-GWIR-HDG 32 42.3 M8 20 x 3.0 101 M8 x 25 1500ADJ-040-GWIR-HDG 40 48.3 M8 20 x 3.0 107 M8 x 25 1500ADJ-050-GWIR-HDG 50 60.3 M8 20 x 3.0 119 M8 x 25 1500ADJ-065-GWIR-HDG 65 76.1 M8 20 x 3.0 135 M8 x 25 1500ADJ-080-GWIR-HDG 80 88.9 M8 20 x 3.0 148 M8 x 25 1500ADJ-100-GWIR-HDG 100 113.3 M8 20 x 3.0 173 M8 x 25 2500ADJ-125-GWIR-HDG 125 140 M8 20 x 3.0 199 M8 x 25 4000ADJ-150-GWIR-HDG 150 165 M8 20 x 3.0 225 M8 x 25 4000

Pipe Size Actual Pipe RS W x T B Fastener Max. Rec.(mm) OD (mm) (mm) (mm) Load (N)

ADJ-015-PPVC-PPC 15 21.3 M8 20 x 3.0 80 M8 x 25 1500ADJ-025-PPVC-PPC 25 33.4 M8 20 x 3.0 92 M8 x 25 1500ADJ-032-PPVC-PPC 32 42.2 M8 20 x 3.0 101 M8 x 25 1500ADJ-050-PPVC-PPC 50 60.3 M8 20 x 3.0 119 M8 x 25 1500ADJ-080-PPVC-PPC 80 88.9 M8 20 x 3.0 148 M8 x 25 1500ADJ-100-PPVC-PPC 100 114.3 M8 20 x 3.0 173 M8 x 25 1500

Suspend horizontal & vertical pipe services• Adjustable Bracket sizes 15 mm to 100 mm • Adjustable yoke 48 mm to 65 mm • Double bolted • Suits up to M8 rod• Finish: Polyester Powder

Coating (PPC) White

Adjustable Clamp - ADJ for P/PVC Pipe

W

RS

RS

T

W

T

B

B




2

Suspend horizontal & vertical pipe services• Adjustable bracket sizes 20 mm to 300 mm • Adjustable yoke 48 mm to 65 mm • Double bolted• Suits up to M12 rod• Closed cap nut helps prevent rod damage to hanger• Finish: Polyester powder coating (PPC) brown

or hot dip galvanised (HDG)

Adjustable Clamp - ADJ for Copper Pipe


PPC HDGADJ-020-CU-PPC ADJ-020-CU-HDG 20 19 M8 20 x 3.0 78 M8 x 25 1500ADJ-025-CU-PPC ADJ-025-CU-HDG 25 25.4 M8 20 x 3.0 84 M8 x 25 1500ADJ-032-CU-PPC ADJ-032-CU-HDG 32 31.8 M8 20 x 3.0 91 M8 x 25 1500ADJ-040-CU-PPC ADJ-040-CU-HDG 40 38.1 M8 20 x 3.0 97 M8 x 25 1500ADJ-050-CU-PPC ADJ-050-CU-HDG 50 51.2 M8 20 x 3.0 110 M8 x 25 1500ADJ-065-CU-PPC ADJ-065-CU-HDG 65 63.5 M8 20 x 3.0 123 M8 x 25 1500ADJ-080-CU-PPC ADJ-080-CU-HDG 80 76.2 M8 20 x 3.0 135 M8 x 25 1500ADJ-100-CU-PPC ADJ-100-CU-HDG 100 101.6 M8 20 x 3.0 161 M8 x 25 1500ADJ-125-CU-PPC ADJ-125-CU-HDG 125 127 M8 25 x 3.0 186 M8 x 25 1500ADJ-150-CU-PPC ADJ-150-CU-HDG 150 152.4 M8 25 x 3.0 211 M8 x 25 2500

ADJ-200-CU-HDG 200 203.2 M12 40 x 5.0 299 M12 x 50 4000ADJ-250-CU-HDG 250 254 M12 40 x 5.0 350 M12 x 50 6000ADJ-300-CU-HDG 300 304 M12 40 x 5.0 399 M12 x 50 6000

W

T

RS

B




12

Adjustable Clamp - ADJ for PVC Pipe

Suspend horizontal & vertical pipe services• Adjustable bracket sizes 40 mm to 300 mm • Adjustable yoke 48 mm to 65 mm• Double bolted• Suits up to M12 rod• Finish: Polyester powder coating (PPC) white

or hot dip galvanised (HDG)


PPC HDGADJ-040-PVC-PPC ADJ-040-PVC-HDG 40 43 M8 20 x 3.0 102 M8 x 25 1500ADJ-050-PVC-PPC ADJ-050-PVC-HDG 50 55 M8 20 x 3.0 114 M8 x 25 1500ADJ-065-PVC-PPC ADJ-065-PVC-HDG 65 69 M8 20 x 3.0 128 M8 x 25 1500ADJ-080-PVC-PPC ADJ-080-PVC-HDG 80 82 M8 20 x 3.0 141 M8 x 25 1500

ADJ-090-PVC-HDG 90 90 M8 20 x 3.0 149 M8 x 25 1500ADJ-100-PVC-PPC ADJ-100-PVC-HDG 100 110 M8 20 x 3.0 169 M8 x 25 1500ADJ-150-PVC-PPC ADJ-150-PVC-HDG 150 160 M8 25 x 3.0 219 M8 x 25 1500ADJ-225-PVC-PPC ADJ-225-PVC-HDG 225 251 M12 40 x 5.0 346 M12 x 50 6000ADJ-300-PVC-PPC ADJ-300-PVC-HDG 300 316 M12 40 x 5.0 411 M12 x 50 7500

2

W

T B

RS




2

Pipe Size Actual Pipe W x T H Fastener Max. Rec.(mm) OD (mm) (mm) (mm) (Imperial) Load (N)

NUT-015-CU-PPC 15 12.7 20 x 3.0 44 1/4 x 1 1500NUT-020-CU-PPC 20 19 20 x 3.0 50 1/4 x 1 1500NUT-025-CU-PPC 25 25.4 20 x 3.0 56 1/4 x 1 1500NUT-032-CU-PPC 32 31.8 20 x 3.0 63 1/4 x 1 1500NUT-040-CU-PPC 40 38.1 20 x 3.0 69 1/4 x 1 1500NUT-050-CU-PPC 50 51.2 20 x 3.0 82 1/4 x 1 1500NUT-065-CU-PPC 65 63.5 20 x 3.0 95 1/4 x 1 1500NUT-080-CU-PPC 80 76.2 20 x 3.0 107 1/4 x 1 1500NUT-100-CU-PPC 100 101.6 20 x 3.0 133 5/16 x 1 1500NUT-125-CU-PPC 125 127 25 x 3.0 158 5/16 x 1 2500NUT-150-CU-PPC 150 152.4 25 x 3.0 187 5/16 x 1 2500

Suspended pipe services• Nut Clip sizes 15 mm to 150 mm • Cup head fastener• Doubled bolted• Suits M10 rod• Finish: Polyester powder coating (PPC) brown

Nut Clip - NUT for Copper Pipe

W

TH




14

2

Pipe Size Actual Pipe W x T H Surface Fastener Max. Rec.(mm) OD (mm) (mm) (mm) Finish (Imperial) Load (N)

NUT-040-PVC-PPC 40 43 20 x 3.0 74 PPC 1/4 x 1 1500NUT-050-PVC-PPC 50 55 20 x 3.0 86 PPC 1/4 x 1 1500NUT-065-PVC-PPC 65 69 20 x 3.0 100 PPC 1/4 x 1 1500NUT-080-PVC-PPC 80 82 20 x 3.0 113 PPC 1/4 x 1 1500NUT-090-PVC-PPC 90 90 20 x 3.0 121 PPC 5/16 x 1 1500NUT-100-PVC-PPC 100 110 20 x 3.0 141 PPC 5/16 x 1 1500NUT-150-PVC-PPC 150 160 25 x 3.0 191 PPC 5/16 x 1 1500

Suspended pipe services• Nut clip sizes 40 mm to 150 mm • Cup head fastener• Doubled bolted• Suits M10 rod• Finish: Polyester powder

coating (PPC) white

Nut Clip - NUT for PVC Pipe

Pipe Size Actual Pipe W x T B RS Surface Max. Rec.(mm) OD (mm) (mm) (mm) Finish Load (N)

PNG-040-PVC-PPC 40 43 25 x 1.6 78 M10 PPC 1500PNG-050-PVC-PPC 50 55 25 x 1.6 96 M10 PPC 1500PNG-065-PVC-PPC 65 69 25 x 1.6 111 M10 PPC 1500PNG-080-PVC-PPC 80 82 28 x 2.2 131 M12 PPC 1500PNG-100-PVC-PPC 100 110 28 x 2.2 170 M12 PPC 1500PNG-150-PVC-PPC 150 160 32 x 3.2 230 M12 PPC 1500PNG-225-PVC-PPC 225 250 32 x 3.2 391 M12 PPC 6000PNG-300-PVC-PPC 300 315 32 x 3.4 493 M12 PPC 7500

Suspended pipe services - Variable• Pear clip sizes 40 mm to 300 mm • Finish: Polyester powder coating

(PPC) white

Pear hanging Clip - PNG for PVC Pipe

W

TH

BW

T

RS




2

Pipe Size Actual Pipe W x T L HS Max. Rec.(mm) OD (mm) (mm) (mm) (mm) Load (N)

SAD-015-CU-PPC 15 12.7 25 x 1.3 54 8 1500 SAD-020-CU-PPC 20 19 25 x 1.3 61 8 1500 SAD-025-CU-PPC 25 25.4 25 x 1.3 67 8 1500SAD-032-CU-PPC 32 31.8 25 x 1.6 74 8 1500SAD-040-CU-PPC 40 38.1 25 x 3.0 98 10 1500SAD-050-CU-PPC 50 51.2 25 x 3.0 111 10 1500SAD-065-CU-PPC 65 63.5 25 x 3.0 124 10 1500SAD-080-CU-PPC 80 76.2 25 x 3.0 136 10 1500SAD-100-CU-PPC 100 101.6 25 x 3.0 170 10 1500SAD-150-CU-PPC 150 152.4 25 x 3.0 212 10 2500

Light duty support for Copper tubing • Copper saddle sizes 15 mm to 150 mm • Attaches directly to horizontal or vertical structural member • Fixes pipe directly to wall or ceiling• Finish: Polyester powder coating (PPC) brown

Saddle Clamp - SAD for Copper Pipe

W

T

HS

NOTE: Follow fastener manufacturer’s recommended shear and pull-out strength when fastening to the structure.

L




16

Pipe Size Actual Pipe W x T L HS Max. Rec.(nb) OD (mm) (mm) (mm) (mm) Load (N)

SAD-020-GWIR-HDG 20 26.7 25 x 1.3 69 8 1500SAD-025-GWIR-HDG 25 33.7 25 x 1.3 75 8 1500SAD-032-GWIR-HDG 32 42.4 25 x 1.6 85 8 1500SAD-040-GWIR-HDG 40 48.3 25 x 3.0 108 10 1500SAD-050-GWIR-HDG 50 60.3 25 x 3.0 121 10 1500SAD-065-GWIR-HDG 65 76.1 25 x 3.0 136 10 1500SAD-080-GWIR-HDG 80 88.9 25 x 3.0 149 10 1500SAD-100-GWIR-HDG 100 113.3 25 x 3.0 173 10 2500SAD-150-GWIR-HDG 150 165.1 25 x 3.0 225 10 4000SAD-200-GWIR-HDG 200 219 40 x 6.0 315 14 6000SAD-250-GWIR-HDG 250 273 40 x 6.0 369 14 7500

Light & Medium duty support for Steel pipe • Steel saddle sizes 20 nb to 250 nb • Attaches directly to horizontal or vertical structural member • Fixes pipe directly to wall or ceiling• Finish: Hot dip galvanised (HDG)

Saddle Clamp - SAD for Steel Pipe

2

W

T

HS


L




2

Pipe Size Actual Pipe W x T L HS Max. Rec.(mm) OD (mm) (mm) (mm) (mm) Load (N)

SAD-040-PVC-PPC 40 43 25 x 3.0 103 10 1500SAD-050-PVC-PPC 50 55 25 x 3.0 111 10 1500SAD-065-PVC-PPC 65 69 25 x 3.0 129 10 1500SAD-080-PVC-PPC 80 82 25 x 3.0 142 10 1500SAD-090-PVC-PPC 90 90 25 x 3.0 150 10 1500SAD-100-PVC-PPC 100 110 25 x 3.0 170 10 1500SAD-150-PVC-PPC 150 160 25 x 3.0 220 10 1500SAD-225-PVC-PPC 225 251 40 x 6.0 346 14 6000SAD-300-PVC-PPC 300 316 40 x 6.0 411 14 7500

Light & Medium duty support for PVC pipe • PVC saddle sizes 40 mm to 300 mm • Attaches directly to horizontal or vertical structural member • Fixes pipe directly to wall or ceiling• Finish: Polyester powder coating (PPC) white

Saddle Clamp - SAD for PVC Pipe

W

T

HS


L




18

2

Pipe Size Actual Pipe W x T L HS Fastener Max. Rec.(mm) OD (mm) (mm) (mm) (mm) Load (N)

SOB-040-CU-PPC 40 38.1 20 x 3.0 93 10 M8 x 25 1500SOB-050-CU-PPC 50 51.2 20 x 3.0 110 10 M8 x 25 1500SOB-065-CU-PPC 65 63.5 20 x 3.0 119 10 M8 x 25 1500SOB-080-CU-PPC 80 76.2 20 x 3.0 131 10 M8 x 25 1500SOB-100-CU-PPC 90 101.6 20 x 3.0 157 10 M8 x 25 1500SOB-125-CU-PPC 100 127 25 x 3.0 185 10 M8 x 25 1500SOB-150-CU-PPC 150 152.4 25 x 3.0 210 10 M8 x 25 2500

Stand off bracket for vertical pipe services • Stand off bracket sizes 40 mm to 150 mm • Attaches directly to horizontal

or vertical structural member • Double bolted• Finish: Polyester powder

coating (PPC) brown

Stand off Bracket - SOB for Copper Pipe

Pipe Size Actual Pipe W x T L HS Fastener Max. Rec.(mm) OD (mm) (mm) (mm) (mm) Load (N)

SOB-040-PVC-PPC 40 43 20 x 3.0 98 10 M8 x 25 1500SOB-050-PVC-PPC 50 55 20 x 3.0 110 10 M8 x 25 1500SOB-065-PVC-PPC 65 69 20 x 3.0 124 10 M8 x 25 1500SOB-080-PVC-PPC 80 82 20 x 3.0 137 10 M8 x 25 1500SOB-090-PVC-PPC 90 90 20 x 3.0 145 10 M8 x 25 1500SOB-100-PVC-PPC 100 110 20 x 3.0 165 10 M8 x 25 1500SOB-150-PVC-PPC 150 160 25 x 3.0 220 10 M8 x 25 1500SOB-225-PVC-PPC 225 251 40 x 6.0 368 13.5 M12 x 40 6000SOB-300-PVC-PPC 300 316 40 x 6.0 435 13.5 M12 x 40 7500

Stand off bracket for vertical pipe services• Stand off bracket sizes 40 mm to 300 mm • Attaches directly to horizontal

or vertical structural member • Double bolted• Finish: Polyester powder

coating (PPC) white

Stand off Bracket - SOB for PVC Pipe

HSW

T

L

HSW

T

L

NOTE: Follow fastener manufacturer’srecommended shear and pull-outstrength when fastening to the structure.

NOTE: Follow fastener manufacturer’s rec-ommended shear and pull-out strengthwhen fastening to the structure.




2Two Piece Clamp - TPC for Copper Pipe

Fastening of vertical & horizontal pipe services• Two piece bracket sizes 20 mm to 300 mm • Double bolted • Finish: Polyester powder coating (PPC) brown or

hot dip galvanised (HDG)

Pipe Size Actual Pipe W x T L Fastener Max. Rec.(mm) OD (mm) (mm) (mm) Load (N)

PPC HDGTPC-020-CU-PPC 20 19 20 x 3.0 74 M8 x 25 1500TPC-025-CU-PPC 25 25.4 20 x 3.0 80.5 M8 x 25 1500TPC-032-CU-PPC 32 31.8 20 x 3.0 87 M8 x 25 1500TPC-040-CU-PPC 40 38.1 20 x 3.0 93 M8 x 25 1500TPC-050-CU-PPC 50 51.2 20 x 3.0 106 M8 x 25 1500TPC-065-CU-PPC 65 63.5 20 x 3.0 119 M8 x 25 1500TPC-080-CU-PPC 80 76.2 20 x 3.0 131 M8 x 25 1500TPC-100-CU-PPC 100 101.6 20 x 3.0 157 M8 x 25 1500TPC-125-CU-PPC 125 127 25 x 3.0 185 M8 x 25 1500TPC-150-CU-PPC 150 152.4 25 x 3.0 210 M8 x 25 2500TPC-200-CU-PPC 200 203.2 40 x 6.0 317 M12 x 40 4000

TPC-250-CU-HDG 250 254 40 x 6.0 371 M12 x 40 6000TPC-300-CU-HDG 300 304 40 x 6.0 411 M12 x 40 6000

W

T

L




20

2

Pipe Size Actual Pipe W x T L Fastener Max. Rec.(nb) OD (mm) (mm) (mm) Load (N)

TPC-015-GWIR-HDG 15 21.3 20 x 3.0 76 M8 x 25 1500TPC-020-GWIR-HDG 20 26.9 20 x 3.0 82 M8 x 25 1500TPC-025-GWIR-HDG 25 33.7 20 x 3.0 89 M8 x 25 1500TPC-032-GWIR-HDG 32 42.3 20 x 3.0 98 M8 x 25 1500TPC-040-GWIR-HDG 40 48.3 20 x 3.0 103 M8 x 25 1500TPC-050-GWIR-HDG 50 60.3 20 x 3.0 115 M8 x 25 1500TPC-065-GWIR-HDG 65 76.1 20 x 3.0 131 M8 x 25 1500TPC-080-GWIR-HDG 80 88.9 20 x 3.0 144 M8 x 25 1500TPC-100-GWIR-HDG 100 113.3 20 x 3.0 172 M8 x 25 2500TPC-125-GWIR-HDG 125 140 25 x 3.0 195 M8 x 25 4000TPC-150-GWIR-HDG 150 165.1 25 x 3.0 220 M8 x 25 4000

Fastening of vertical & horizontal pipe services • Two piece bracket sizes 15 nb to 150 nb • Double bolted • Finish: Hot dip galvanised (HDG)

Two Piece Clamp - TPC for Steel Pipe

W

T

L




2


TPC-020-PPVC-PPC 20 26.7 20 x 3.0 82 M8 x 25 1500TPC-025-PPVC-PPC 25 33.4 20 x 3.0 89 M8 x 25 1500TPC-032-PPVC-PPC 32 42.2 20 x 3.0 98 M8 x 25 1500TPC-040-PPVC-PPC 40 48.2 20 x 3.0 103 M8 x 25 1500TPC-050-PPVC-PPC 50 60.3 20 x 3.0 115 M8 x 25 1500TPC-080-PPVC-PPC 80 88.9 20 x 3.0 144 M8 x 25 1500TPC-100-PPVC-PPC 100 114.3 20 x 3.0 172 M8 x 25 1500

Fastening of vertical & horizontal pipe services• Two piece bracket sizes 20 mm to 100 mm • Double bolted • Finish: Polyester powder coating (PPC) white

Two Piece Clamp - TPC for Pressure PVC Pipe

Fastening of vertical & horizontal pipe services• Two piece bracket sizes 40 mm to 375 mm• Double bolted • Finish: Polyester powder coating (PPC)

white or hot dip galvanised (HDG)

Two Piece Clamp - TPC for PVC Pipe

Pipe Actual W x T L Fastener Max. Rec.Size Pipe (mm) (mm) Load (N)(mm) OD

PPC HDG (mm)TPC-040-PVC-PPC 40 43 20 x 3.0 98 M8 x 25 1500TPC-050-PVC-PPC 50 55 20 x 3.0 115 M8 x 25 1500TPC-065-PVC-PPC 65 69 20 x 3.0 124 M8 x 25 1500TPC-080-PVC-PPC 80 82 20 x 3.0 144 M8 x 25 1500TPC-100-PVC-PPC 100 110 20 x 3.0 165 M8 x 25 1500TPC-150-PVC-PPC 150 160 25 x 3.0 220 M8 x 25 1500TPC-225-PVC-PPC TPC-225-PVC-HDG 225 250 40 x 5.0 368 M12 x 40 6000TPC-300-PVC-PPC TPC-300-PVC-HDG 300 316 40 x 5.0 435 M12 x 40 7500

TPC-375-PVC-HDG 375 401 40 x 6.0 530 M12 x 40 9000

W

T

L

W

T

L




22


TPC-225-FRC-HDG 225 277 40 x 6.0 388 M12 x 40 contact factoryTPC-300-FRC-HDG 300 358 40 x 6.0 470 M12 x 40 contact factoryTPC-375-FRC-HDG 375 438 50 x 8.0 565 M16 x 50 contact factoryTPC-450-FRC-HDG 450 527 50 x 8.0 655 M16 x 50 contact factory

Fastening of vertical & horizontal pipe services • Two piece bracket sizes 225 mm

to 450 mm • Double bolted medium duty • Finish: Hot dip galvanised (HDG)

Two Piece Clamp - TPC for Fiber ReinforcedConcrete Pipe (FRC)

Nom. Actual Pipe d W x T Surface Connector Sc x L Max. Rec. ApprovalsPipe Size OD (mm) (mm) (mm) Finish Load (N)

577002 15 21.3 20 - 24 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS577003 20 26.9 25 - 30 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577004 25 33.7 31 - 35 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577006 32 42.4 40 - 45 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577007 40 48.3 48 - 53 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577009 50 60.3 60 - 65 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577011 65 76.1 76 - 81 30 x 3.0 EG M10/M12 M8 x 40 3500 VdS / FM577013 80 88.9 88 - 94 30 x 3.0 EG M10/M12 M8 x 40 3500 VdS / FM577016 100 114.3 110 - 116 30 x 3.0 EG M10/M12 M8 x 40 3500 VdS / FM577020 125 139.7 140 - 146 40 x 4.0 EG M12/M16 M10 x 40 5000 VdS / FM577022 150 165.1 159 - 165 40 x 4.0 EG M12/M16 M10 x 40 5000 VdS577028 200 219.1 219 - 226 40 x 4.0 EG M12/M16 M10 x 40 8500 VdS / FM577032 250 273 267 - 273 40 x 4.0 EG M16/M20 M12 x 40 10000 VdS / FM

Suspended steel pipe services• Steel pipes from 15 mm to 250 mm • Multi-function screws with

hexagonal/slotted combination head • Flared steel band, also suitable for

plastic pipes • Fillet welded connector nut • Fastener nuts spot welded• Up to 10000(N) load capacity • FM and VdS approved• Hinged version up to 100

HDPC

2

W

T

L

NEWNEWd

Sc

L

M8/M10

W

T


SPRINKLER SUPPORTS


3

EPB FCN CNC HDPC


401 CADDY® SLOT LOCK CADDY® EZ RISER CDS


107 108 109 SO


CLS

Page 31

CTC

Page 32

NEWNEWNEWNEW

NEWNEW NEWNEW

NEWNEW

ERIC1

Page 32

U-bolt

Page 33

STEEL PIPE

CPVC

NEWNEW

NEWNEW NEWNEWNEWNEW NEWNEW

NEWNEW


SPRINKLER SUPPORTS


24

3

Pipe Size Actual Pipe W x T RS Max. Rec.(nb) OD (mm) (mm) Load (N)

EPB 27 20 27 25 x 1.6 M10 1330EPB 34 25 34 25 x 1.6 M10 1330EPB 43 32 43 25 x 1.6 M10 1330EPB 48 40 48 25 x 1.6 M10 1330EPB 60 50 60 25 x 1.6 M10 1330EPB 76 65 76 28 x 2.2 M12 2340EPB 89 80 89 28 x 2.2 M12 2340EPB 114 100 113 30 x 3.2 M12 2890EPB 165 150 165 32 x 3.2 M12 4450EPB 220 200 219 40 x 3.2 M16 6000

Horizontal suspended steel pipe services• EPB hanger for sizes 27 mm to 219 mm • FM approved• Finish: Electro-zinc plated (EG)

Pear Bands - EPB for Steel Pipe

W

T

RS


SPRINKLER SUPPORTS


3

Heavy Duty Adjustable Band Hanger• Size range: 15 mm to 200 mm • Recommended for the suspension of stationary

non-insulated pipe lines• Features a retained insert nut to ensure that the

loop hanger and insert nut stay together• Finish: Electro-zinc plated (EG)

Note: Imperial sizes available upon special request

20 mm - 200 mm 15 mm - 200 mm

RS

B

A

SWIVEL LOOP HANGER FCN (115)

Item Nominal Steel Pipe OD RS A B Max. Rec.No. Pipe Size mm Metric mm mm Load (N)

mm (in) (in) (in) (in) (lbs)(in)

597860 115M0050EG 15 21 M10 70 25 1330- 1150050EG (1/2) (0.840) (3/8) (2-3/4) (1) (300)

597870 115M0075EG 20 27 M10 78 25 1330- 1150075EG (3/4) (1.050) (3/8) (3-1/16) (1) (300)

597880 115M0100EG 25 34 M10 84 25 1330- 1150100EG (1) (1.315) (3/8) (3-5/16) (1) (300)

597890 115M0125EG 32 43 M10 90 25 1330- 1150125EG (1-1/4) (1.660) (3/8) (3-9/16) (1) (300)

597900 115M0150EG 40 48 M10 97 25 1330- 1150150EG (1-1/2) (1.900) (3/8) (3-13/16) (1) (300)

597910 115M0200EG 50 60 M10 108 25 1330- 1150200EG (2) (2.375) (3/8) (4-1/4) (1) (300)

597920 115M0250EG 65 76 M10 140 25 2340- 1150250EG (2-1/2) (2.875) (3/8) (5-1/2) (1) (525)

597930 115M0300EG 80 89 M10 165 25 2340- 1150300EG (3) (3.500) (3/8) (6-1/2) (1) (525)

597940 115M0400EG 100 114 M10 191 25 2890- 1150400EG (4) (4.500) (3/8) (7-1/2) (1) (650)

597950 115M0500EG 125 140 M12 232 32 4450- 1150500EG (5) (5.563) (1/2) (9-1/8) (1-1/4) (1000)

597960 115M0600EG 150 165 M12 286 32 4450- 1150600EG (6) (6.625) (1/2) (11-1/4) (1-1/4) (1000)

597970 115M0800EG 200 219 M12 325 32 4450- 1150800EG (8) (8.625) (1/2) (12-13/16) (1-1/4) (1000)

NEWNEW


SPRINKLER SUPPORTS


26

3CNC Nut Clip - CNC for Steel Pipe

Suspended sprinkler fire pipe services• Nut Clip sizes 20 nb to 150 nb • Cup head fastener• Doubled bolted• Up to 4000 (N) load capacity • Available in M10 and M12• Finish: Electro-zinc plated (EG)

Pipe Size Actual Pipe W x T Fastener Max. Rec.(nb) OD (mm) (mm) (Imperial) Load (N)

M10/M12RS=M10 RS=M12

CNC 20 20 26.9 20 x 3.0 1/4 x 1 1500CNC 25 25 33.7 20 x 3.0 1/4 x 1 1500CNC 32 32 42.4 20 x 3.0 1/4 x 1 1500CNC 40 40 48.3 20 x 3.0 1/4 x 1 1500CNC 50 50 60.3 20 x 3.0 1/4 x 1 1500CNC 65 CNC 65 M12 65 76.1 20 x 3.0 1/4 x 1 1500/1500CNC 80 CNC 80 M12 80 88.9 20 x 3.0 1/4 x 1 1500/1500CNC 100 CNC 100 M12 100 113.3 25 x 5.0 5/16 x 1 2500/2500CNC 125 CNC 125 M12 125 139.7 25 x 5.0 5/16 x 1 2500/4000CNC 150 CNC 150 M12 150 165.1 25 x 5.0 5/16 x 1 4000/4000

W

RS

T


SPRINKLER SUPPORTS


3

Nom. Actual Pipe d W x T Surface Connector Sc x L Max. Rec. ApprovalsPipe Size OD (mm) (mm) (mm) Finish Load (N)

577002 15 21.3 20 - 24 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS577003 20 26.9 25 - 30 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577004 25 33.7 31 - 35 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577006 32 42.4 40 - 45 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577007 40 48.3 48 - 53 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577009 50 60.3 60 - 65 30 x 2.5 EG M8/M10 M6 x 30 2000 VdS / FM577011 65 76.1 76 - 81 30 x 3.0 EG M10/M12 M8 x 40 3500 VdS / FM577013 80 88.9 88 - 94 30 x 3.0 EG M10/M12 M8 x 40 3500 VdS / FM577016 100 114.3 110 - 116 30 x 3.0 EG M10/M12 M8 x 40 3500 VdS / FM577020 125 139.7 140 - 146 40 x 4.0 EG M12/M16 M10 x 40 5000 VdS / FM577022 150 165.1 159 - 165 40 x 4.0 EG M12/M16 M10 x 40 5000 VdS577028 200 219.1 219 - 226 40 x 4.0 EG M12/M16 M10 x 40 8500 VdS / FM577032 250 273 267 - 273 40 x 4.0 EG M16/M20 M12 x 40 10000 VdS / FM

Suspended steel pipe services• Steel pipes from 15 mm to 250 mm • Multi-function screws with hexagonal combination head

(slot on sizes up to 100) • Flared steel band, also suitable for

plastic pipes • Fillet welded connector nut • Fastener nuts spot welded• Up to 10000(N) load capacity • Hinged version up to 100

HDPC NINEWNEW

d

Sc

L

M8/M10

W

T


SPRINKLER SUPPORTS


28

3

Standard Duty• Size range: 15 mm to 600 mm • Recommended for the suspension of stationary

non-insulated pipe lines• Finish: Electro-zinc plated (EG)

CLEVIS HANGER 401

Item Nominal Pipe RS A B Max.No. Steel Pipe OD Metric (mm) (mm) Rec.

Size (mm) Load(mm) (N)

179398 4010050EG 15 (1/2") 21 M10 54 41 2700179399 4010075EG 20 (3/4") 27 M10 61 45 2700179420 4010100EG 25 (1") 34 M10 79 52 2700179421 4010125EG 32 (1-1/4") 43 M10 84 61 2700179422 4010150EG 40 (1-1/2") 48 M10 100 75 2700179423 4010200EG 50 (2") 60 M10 114 83 2700179424 4010250EGAU 65 (2-1/2") 76 M12 133 95 5000179425 4010300EG 80 (3") 89 M12 152 105 5000179426 4010400EG 100 (4") 114 M16 197 137 5000179427 4010500EG 125 (5") 140 M16 248 173 6400179428 4010600EG 150 (6") 165 M20 298 209 8600179429 4010800EG 200 (8") 219 M20 356 241 8900179430 4011000EG 250 (10") 273 M20 419 276 16000179431 4011200EG 300 (12") 324 M20 473 305 17000179432 4011400EG 350 (14") 356 M24 552 368 18700179433 4011600EG 400 (16") 406 M24 609 400 20500179434 4011800EG 450 (18") 457 M28 680 444 21400179435 4012000EG 500 (20") 508 M32 762 498 21400179436 4012400EG 600 (24") 610 M32 867 552 21400

RS

BA

65 - 200 mm

NEWNEW



3

Standard Duty• Size range: 15 mm and 200 mm• Slotted crossbeam design is easier to assemble

than conventional nut and bolt style clevis hangers• Eliminates the need to install additional parts to

control deflection• Recommended for the suspension of stationary


B

A

“The CADDY® SLOT LOCKHanger is UL Listed underUL 203 for fire protectionapplications”

Features• UL® Listed and FM approved• Each assembly comes individually bagged, ready to assemble• Patent-pending slotted crossbeam design is easier and faster to assemble

than conventional nut and bolt style hangers• Notches in the crossbeam capture the top and bottom legs under load,

minimizing deflection• Meets FM deflection requirements without the need to install

additional parts• Has successfully passed the rigorous vibration testing requirements

for both UL and FM

CADDY® SLOT LOCK



178300 4270050EG 15 (1/2") 21 M10 69 56 2700178301 4270075EG 20 (3/4") 27 M10 80 64 2700178302 4270100EG 25 (1") 34 M10 87 68 2700178303 4270125EG 32 (1-1/4") 43 M10 96 72 2700178304 4270150EG 40 (1-1/2") 48 M10 107 80 2700178305 4270200EG 50 (2") 60 M10 123 90 2700178306 4270250EGAU 65 (2-1/2") 76 M12 138 98 5000178307 4270300EG 80 (3") 89 M12 161 113 5000178308 4270400EG 100 (4") 114 M16 203 142 5000178309 4270500EG 125 (5") 140 M16 249 174 6400178310 4270600EG 150 (6") 165 M20 291 202 8600178311 4270800EG 200 (8") 219 M20 358 243 8900

NEWNEW

SPRINKLER SUPPORTS


SPRINKLER SUPPORTS


30

3

Vertical Pipe Support• Size range: 15 mm to 600 mm• Recommended for supporting vertical steel pipe risers• Slotted holes make assembly a snap – no fumbling

with loose hardware• Bolts are accessible from the front, serrated washer head

design means no wrench required on back side for tightening• Finish: Electro-zinc plated (EG)

NOTE: Clamp is fitted for steel pipe and should beinstalled below a coupling or shear lug, with boltstorqued to recommended value

AHS

B

A

CADDY® EZ RISER

Item Nominal Pipe A B HS Max.No. Steel Pipe OD mm mm Metric Rec.

Size mm (in) (in) (in) Loadmm (in) (in) (N)

129325 5100050EG 15 (1/2") 21 216 25 11 1138129326 5100075EG 20 (3/4") 27 229 25 11 1138129327 5100100EG 25 (1") 34 229 25 11 1138129328 5100125EG 32 (1-1/4") 43 240 25 11 1138129329 5100150EG 40 (1-1/2") 48 251 25 11 1138129330 5100200EG 50 (2") 60 260 30 11 1138129331 5100250EGAU 65 (2-1/2") 76 279 30 11 1736129332 5100300EG 80 (3") 89 298 30 11 2354129333 5100400EG 100 (4") 114 330 38 14 3609129334 5100500EGAU 125 (5") 140 368 38 14 5168129335 5100600EGAU 150 (6") 165 406 51 14 6992129336 5100800EG 200 (8") 219 464 51 17 11140129337 5101000EG 250 (10") 273 524 51 17 11140129338 5101200EG 300 (12") 324 569 51 17 12033129339 5101400EG 350 (14") 356 613 51 17 12033129340 5101600EG 400 (16") 406 708 64 21 12925129341 5101800EG 450 (18") 457 757 64 21 12925129342 5102000EG 500 (20") 508 819 64 21 12925129343 5102400EG 600 (24") 610 918 76 23 12925

NEWNEW

50 - 200 mm


SPRINKLER SUPPORTS


3

Pipe Size Actual Pipe W x T L HS H Max. Rec.(nb) OD (mm) (mm) (mm) (mm) (mm) Load (N)

CDS 25 25 33.7 25 x 1.6 69 8 69 1500CDS 32 32 42.3 25 x 1.6 74 8 74 1500CDS 40 40 48.3 25 x 1.6 79 8 79 1500CDS 50 50 60.3 25 x 1.6 84 8 84 1500

Light duty support for steel pipe • Steel saddle sizes 25 nb to 50 nb • Attaches directly to horizontal or vertical structural member • Finish: Electro-zinc plated (EG)

Deep Saddle Clip - CDS for Steel Pipe

Pipe Size Actual Pipe W x T L HS Max. Rec.(nb) OD (mm) (mm) (mm) (mm) Load (N)

CLS 25 25 33.7 25 x 1.6 69 8 1500CLS 32 32 42.3 25 x 1.6 74 8 1500CLS 40 40 48.3 25 x 1.6 79 8 1500CLS 50 50 60.3 25 x 1.6 84 8 1500CLS 65 65 76.1 30 x 2.0 125 8 1500

Light duty support for steel pipe • Steel saddle sizes 25 nb to 65 nb • Attaches directly to horizontal or vertical structural member • Fixes fire pipe directly to wall or ceiling • Finish: Electro-zinc plated (EG)

Shallow Saddle Clip - CLS for Steel Pipe

W

H

LT

HS

W

T L

HS

NOTE: Follow fastener manufacturer’s recommended shear and pull-out strengthwhen fastening to the structure.

NOTE: Follow fastener manufacturer’s recommended shear and pull-out strengthwhen fastening to the structure.


SPRINKLER SUPPORTS


32

3

Pipe Size Actual Pipe W x T H Max. Rec.(nb) OD (mm) (mm) (mm) Load (N)

CTC 25 25 33.7 25 x 1.5 85 1500CTC 32 32 42.3 25 x 1.5 94 1500CTC 40 40 48.3 25 x 1.5 100 1500CTC 50 50 60.3 25 x 1.5 120 1500CTC 65 65 76.1 30 x 2.0 138 1500

Perpendicular steel pipe support • Steel twist clip sizes 25 nb to 65 nb • Attaches to horizontal structural member

for perpendicular pipe services • Fixes fire pipe directly to

structural member• Finish: Electro-zinc plated (EG)

Twist Clip - CTC for Steel PipeW

H

T

Pipe Size Actual Pipe W x T L S Max. Rec.(nb) OD (mm) (mm) (mm) (mm) Load (N)

ERIC1 - 34 25 33.7 32 x 1.2 32 11 x 11 1500ERIC1 - 43 32 42.4 32 x 1.2 32 11 x 11 1500ERIC1 - 48 40 48.3 32 x 1.2 32 11 x 11 1500

Support steel pipe services • Single piece clip for sizes 25, 32, 40 nb • One piece clip for fast and convenient

installation • Finish: Electro-zinc plated (EG)

ERIC1 One Piece Clamp - ERIC1 for Steel Pipe

W

S S

L

T

NEWNEW




SPRINKLER SUPPORTS


3

Standard U-bolt• Size range: 25 mm to 200 mm• Pipe support for general piping applications• Supplied with two pre-mounted nuts for each U-bolt• Finish: Electro-zinc plated (EG) & Hot Dip Galvanised (HDG)

RS

A

PIPE FIXINGS U-bolt

Nominal Steel ID RS A FinishPipe Size (mm) (mm)

UBOLT-M6X25 25 34 M6 80 EGUBOLT-M6X32 32 42 M6 95 EGUBOLT-M6X40 40 48 M6 85 EGUBOLT-M6X50 50 60 M6 100 EGUBOLT-M10X25 25 34 M10 90 HDGUBOLT-M10X32 32 42 M10 110 HDGUBOLT-M10X40 40 48 M10 110 HDGUBOLT-M10X50 50 60 M10 110 HDGUBOLT-M12X65 65 76 M12 140 HDGUBOLT-M12X80 80 89 M12 150 HDGUBOLT-M12X100 100 114 M12 175 HDGUBOLT-M12X150 150 165 M12 230 HDGUBOLT-M12X200 200 219 M12 295 HDG

NEWNEW


SPRINKLER SUPPORTS


34

3

Item Nominal Pipe A B Max.No. Pipe OD (mm) (mm) Hanger

Size (mm) Spacing(mm) (m)

597816 1070075EG 20 (3/4”) 26.9 31.8 60.3 1.7597817 1070100EG 25 (1”) 33.7 36.5 68.3 1.8597818 1070125EG 32 (1-1/4”) 42.2 41.3 77.8 2.0597819 1070150EG 40 (1-1/2”) 48.3 44.5 84.1 2.1597821 1070200EG 50 (2”) 60.3 47.6 93.7 2.4

One-hole wrap around strap for CPVC pipe• Size range: 20 mm to 50 mm CPVC pipe• Supports CPVC pipe horizontally from top or side of beam• Flared edges protect the CPVC piping• Finish: Electro-zinc plated (EG)

CPVC PIPE FIXINGS 107

A

B

A

B B

NEWNEW


SPRINKLER SUPPORTS


3

30.2 mm

B5.8 mm DIA.5.8 mm DIA.

A

30.2 mm30.2 mm

B5.8 mm DIA.

A

Two-hole Strap for CPVC Pipe• Size range: 20 mm to 50 mm CPVC pipe• Supports CPVC pipe horizontally from top, bottom

or side of beam• Retainer dimples secure hanger to pipe during installation• Flared edges protect the CPVC piping• Finish: Electro-zinc plated (EG)


Item Nominal Pipe A B Max.No. Pipe OD (mm) (mm) Hanger


597822 1080075EG 20 (3/4”) 26.9 82.6 57.2 1.7597823 1080100EG 25 (1”) 33.7 88.9 63.5 1.8597824 1080125EG 32 (1-1/4”) 42.2 108.0 82.6 2.0597825 1080150EG 40 (1-1/2”) 48.3 112.7 87.3 2.1597826 1080200EG 50 (2”) 60.3 125.4 100.0 2.4

NEWNEW


SPRINKLER SUPPORTS


36

3

Item Nominal Pipe A B Max.No. Steel Pipe OD (mm) (mm) Hanger


597827 1090075EG 20 (3/4”) 26.9 58.7 42.9 1.7597828 1090100EG 25 (1”) 33.7 66.7 49.2 1.8597829 1090125EG 32 (1-1/4”) 42.2 74.6 58.7 2.0597831 1090150EG 40 (1-1/2”) 48.3 81.0 63.5 2.1597832 1090200EG 50 (2”) 60.3 92.1 76.2 2.4

Side Mount Strap for CPVC Pipe• Size range: 20 mm to 50 mm CPVC pipe• Supports CPVC pipe horizontally from top or

bottom of beam• Retainer dimples secure hanger to pipe during installation• Flared edges protect the CPVC piping• Finish: Electro-zinc plated (EG)


30.2 mm30.2 mm

B

A

5.8 mm DIA.5.8 mm DIA.

NEWNEW


SPRINKLER SUPPORTS


3

Stand-off Two-hole Strap for CPVC Pipe• Size range: 20 mm to 50 mm CPVC pipe• Supports CPVC pipe off of the vertical face of structural

or composite wood joists with a minimum of 9.5 mmweb thickness

• Flared edges protect the CPVC piping• Finish: Electro-zinc plated (EG)

Note: DO NOT install on the bottom of a beam or under other horizontal surfaces. For those applications see ERICO® Model #108 2-hole strap for CPVC pipe.

CPVC PIPE FIXING SO

Item Nominal Pipe A B Max.No. Steel Pipe OD (mm) (mm) Hanger


597811 SO12A 20 (3/4”) 26.9 68.3 82.6 1.7597812 SO16A 25 (1”) 33.7 74.6 82.6 1.8597813 SO20A 32 (1-1/4”) 42.2 84.1 82.6 2.0597814 SO24A 40 (1-1/2”) 48.3 90.5 114.3 2.1597815 SO32A 50 (2”) 60.3 103.2 127.0 2.4

5.1 mm DIA.5.1 mm DIA.

A

25.4 mm25.4 mm

B

NEWNEW



38


CLEVIS HANGERS


4

401 CADDY® SLOT LOCK 402 - For copper pipe


NEWNEWNEWNEW NEWNEW


CLEVIS HANGERS


40

4

Standard Duty• Size range: 15 mm to 600 mm • Recommended for the suspension of stationary


CLEVIS HANGER 401



179398 4010050EG 15 (1/2") 21 M10 54 41 2700179399 4010075EG 20 (3/4") 27 M10 61 45 2700179420 4010100EG 25 (1") 34 M10 79 52 2700179421 4010125EG 32 (1-1/4") 43 M10 84 61 2700179422 4010150EG 40 (1-1/2") 48 M10 100 75 2700179423 4010200EG 50 (2") 60 M10 114 83 2700179424 4010250EGAU 65 (2-1/2") 76 M12 133 95 5000179425 4010300EG 80 (3") 89 M12 152 105 5000179426 4010400EG 100 (4") 114 M16 197 137 5000179427 4010500EG 125 (5") 140 M16 248 173 6400179428 4010600EG 150 (6") 165 M20 298 209 8600179429 4010800EG 200 (8") 219 M20 356 241 8900179430 4011000EG 250 (10") 273 M20 419 276 16000179431 4011200EG 300 (12") 324 M20 473 305 17000179432 4011400EG 350 (14") 356 M24 552 368 18700179433 4011600EG 400 (16") 406 M24 609 400 20500179434 4011800EG 450 (18") 457 M28 680 444 21400179435 4012000EG 500 (20") 508 M32 762 498 21400179436 4012400EG 600 (24") 610 M32 867 552 21400

RS

BA

65 - 200 mm

NEWNEW


CLEVIS HANGERS


4

Standard Duty• Size range: 15 mm and 200 mm• Slotted crossbeam design is easier to assemble

than conventional nut and bolt style clevis hangers• Eliminates the need to install additional parts to

control deflection• Recommended for the suspension of stationary


B

A

“The CADDY® SLOT LOCKHanger is UL Listed underUL 203 for fire protectionapplications”

Features• UL® Listed and FM approved• Each assembly comes individually bagged, ready to assemble• Patent-pending slotted crossbeam design is easier and faster to assemble

than conventional nut and bolt style hangers• Notches in the crossbeam capture the top and bottom legs under load,

minimizing deflection• Meets FM deflection requirements without the need to install

additional parts• Has successfully passed the rigorous vibration testing requirements

for both UL and FM

CADDY® SLOT LOCK



179300 4270050EG 15 (1/2") 21 M10 69 56 2700179301 4270075EG 20 (3/4") 27 M10 80 64 2700179302 4270100EG 25 (1") 34 M10 87 68 2700179303 4270125EG 32 (1-1/4") 43 M10 96 72 2700179304 4270150EG 40 (1-1/2") 48 M10 107 80 2700179305 4270200EG 50 (2") 60 M10 123 90 2700179306 4270250EGAU 65 (2-1/2") 76 M12 138 98 5000179307 4270300EG 80 (3") 89 M12 161 113 5000179308 4270400EG 100 (4") 114 M16 203 142 5000179309 4270500EG 125 (5") 140 M16 249 174 6400179310 4270600EG 150 (6") 165 M20 291 202 8600179311 4270800EG 200 (8") 219 M20 358 243 8900

NEWNEW


CLEVIS HANGERS


42

4

Light Duty for Copper Tubing• Size range: 15 mm to 200 mm• Recommended for the suspension

of stationary non-insulated copper tubing lines

• Finish: Copper-colored coating (According toMSS-SP58 for identification purposes only, isolation material required for dielectric barrier)

CLEVIS HANGER 402



179312 4020050CP 15 (1/2") 12.7 M10 52 42 1000179313 4020075CP 20 (3/4") 19 M10 58 46 1000179314 4020100CP 25 (1") 25 M10 76 60 1000179315 4020125CP 32 (1-1/4") 32 M10 70 51 1000179316 4020150CP 40 (1-1/2") 38 M10 84 62 1000179317 4020200CP 50 (2") 51 M10 103 73 1000179318 4020250CP 65 (2-1/2") 63.5 M12 122 84 1100179319 4020300CP 80 (3") 76 M12 140 95 1300179320 4020350CP 90 (3-1/2") 89 M12 155 104 1600179321 4020400CP 100 (4") 102 M12 171 114 2000179322 4020500CP 125 (5") 127 M12 232 162 2700179323 4020600CP 150 (6") 152 M16 261 200 3900179324 4020800CP 200 (8") 203 M20 378 268 5200

RS

BA

NEWNEW


RISER CLAMPS


CADDY® EZ RISER 511 700


5

NEWNEWNEWNEW NEWNEW


RISER CLAMPS


44

5

Vertical Pipe Support• Size range: 13 mm to 600 mm• Recommended for supporting vertical steel pipe risers• Slotted holes make assembly a snap – no fumbling

with loose hardware• Bolts are accessible from the front, serrated washer head

design means no wrench required on back side for tightening• Finish: Electro-zinc plated (EG)

NOTE: Clamp is fitted for steel pipe and should beinstalled below a coupling or shear lug, with boltstorqued to recommended value in instruction sheet

AHS

B

A

CADDY® EZ RISER

Item Nominal Pipe A B HS Max.No. Steel Pipe OD (mm) (mm) Metric Rec.

Size (mm) Loadmm (in) (N)

179325 5100050EG 15 (1/2") 21 216 25 11 1100179326 5100075EG 20 (3/4") 27 229 25 11 1100179327 5100100EG 25 (1") 34 229 25 11 1100179328 5100125EG 32 (1-1/4") 43 240 25 11 1100179329 5100150EG 40 (1-1/2") 48 251 25 11 1100179330 5100200EG 50 (2") 60 260 30 11 1100179331 5100250EGAU 65 (2-1/2") 76 279 30 11 1700179332 5100300EG 80 (3") 89 298 30 11 2300179333 5100400EG 100 (4") 114 330 38 14 3600179334 5100500EGAU 125 (5") 140 368 38 14 5200179335 5100600EGAU 150 (6") 165 406 51 14 7000179336 5100800EG 200 (8") 219 464 51 17 11100179337 5101000EG 250 (10") 273 524 51 17 11100179338 5101200EG 300 (12") 324 569 51 17 12000179339 5101400EG 350 (14") 356 613 51 17 12000179340 5101600EG 400 (16") 406 708 64 21 12900179341 5101800EG 450 (18") 457 757 64 21 12900179342 5102000EG 500 (20") 508 819 64 21 12900179343 5102400EG 600 (24") 610 918 76 23 12900

NEWNEW

50 - 200 mm


RISER CLAMPS


5

Item Nominal Pipe A B HS Max.No. Copper OD (mm) (mm) Metric Rec.

Tubing Size (mm) Loadmm (in) (N)

179344 5110050CPAU 15 (1/2") 13 216 25 11 350

179345 5110075CPAU 20 (3/4") 19 235 25 11 350

179346 5110100CPAU 25 (1") 25 235 25 11 500

179347 5110125CPAU 32 (1-1/4") 32 241 32 11 900

179348 5110150CPAU 40 (1-1/2") 38 241 32 11 900

179349 5110200CPAU 50 (2") 51 264 32 11 900

179350 5110250CPAU 65 (2-1/2") 64 279 32 11 1300

179351 5110300CPAU 80 (3") 76 305 32 11 1300

179352 5110400CPAU 100 (4") 102 317 32 11 1300

179353 5110500CPAU 125 (5") 127 371 38 14 2200

179354 5110600CPAU 150 (6") 152 381 51 14 2700

Vertical Support for Copper Tubing• Size range: 15 mm to 150 mm• Recommended for supporting vertical

copper tubing risers• Finish: Copper-colored coating (According to MSS-SP58 for

identification purposes only, isolation material required fordielectric barrier)

NOTE: Clamp is fitted for copper tubing andshould be installed below a coupling or shearlug, with bolts torqued to recommended value

RISER CLAMP 511

HS

B

A

NEWNEW


RISER CLAMPS


46

5

Offset Pipe Clamp• Size range: 15 mm to 200 mm• Industrial pipe hanger to

support piping away from wall or floor• Finish: Black. Electro-zinc plated (EG) or hot dip

galvanized (HDG) finish available upon special request

A

BHS

STANDARD PIPE CLAMP 700

Item Nominal Pipe A B HS Max.No. Steel Pipe OD (mm) (mm) Metric Rec.

Size (mm) Loadmm (in) (N)

179355 7000050PL 15 (1/2") 21 247 83 10 800

179356 7000075PL 20 (3/4") 27 214 84 10 900

179357 7000100PL 25 (1") 34 230 90 10 900

179358 7000125PL 32 (1-1/4") 43 238 97 10 900

179359 7000150PL 40 (1-1/2") 48 247 195 10 900

179360 7000200PL 50 (2") 60 270 117 10 1800

179361 7000250PLAU 65 (2-1/2") 76 295 130 10 1800

179362 7000300PL 80 (3") 89 327 146 12 1800

179363 7000400PL 100 (4") 114 368 171 12 2700

179364 7000500PLAU 125 (5") 140 400 198 12 2700

179365 7000600PLAU 150 (6") 165 463 229 12 3800

179366 7000800PL 200 (8") 219 524 279 12 3800

NEWNEW



STRUT CLIPS


6

RIGD TCC CHC - For Copper pipe CHC - For Steel pipe


CHC - For PVC pipe CHC - For P/PVC pipe

Page 52 Page 53

NEWNEWNEWNEW


STRUT CLIPS


48

6

Nominal Pipe Max. Rec. Pipe Size OD (mm) Load (N)

RIGD0050EG 15 21 1810RIGD0075EG 20 27 2720RIGD0100EG 25 34 2720RIGD0125EG 32 43 2720RIGD0150EG 40 48 3630RIGD0200EG 50 60 3630RIGD0250EG 65 76 3630RIGD0300EG 80 89 3630RIGD0400EG 100 114 4540

1 1/4"1 1/4"

OD

1 1/4"

ODOD

Heavy Duty Strut Clamps• Size range: 15 mm to 100 mm• One piece break apart design includes captive combo

head machine screw and built in nut (thread impression)• No nuts or bolts to drop or lose• Finish: Electro-zinc plated (EG)

STRUT PIPE CLAMPS RIGD

NEWNEW


STRUT CLIPS


6

Controlled SqueezeShoulder Bolt

Nyloc Nut

Elastomer Cushion

Living Hinge

Plated or Stainless Steel

Clamp

A A 1 9/16"

ID ID

B

A 1 9/16" 1 9/16"

ID

B

Tubing Cushion Clamps• Size range: 6 mm to 150 mm• Ideal for multiple runs while absorbing shock and vibration,

reducing unwanted noise and preventing galvanic corrosion• Fits any standard 41 mm wide strut channel• Interlock design helps ensure that the cushion remains in place• Finish: Electro-zinc plated (EG)

Nominal Pipe ID A B Size Copper Tube

TCC0025CP 6 6 16 25TCC0037CP 10 10 21 29TCC0050CP 15 13 24 34TCC0062CP 16 16 27 39TCC0075CP 20 19 31 43TCC0087CP 22 22 33 46TCC0100CP 25 25 37 50TCC0112CP 28 28 40 53TCC0125CP 32 32 43 56TCC0137CP 35 35 46 60TCC0150CP 40 38 50 63TCC0162CP 41 41 53 66TCC0175CP 44 44 56 69TCC0187CP 48 48 59 73TCC0200CP 50 51 62 77TCC0212CP 54 54 65 82TCC0250CP 65 64 75 96TCC0262CP 66 66 78 100TCC0300CP 80 76 91 109TCC0312CP 79 79 91 112TCC0331CP 84 84 101 121TCC0362CP 92 92 107 130TCC0400CP 100 104 116 141TCC0412CP 105 110 126 148TCC0512CP 125 130 142 166TCC0612CP 150 155 167 192

CADDY® CUSHION CLAMP TCC

40 mm

NEWNEW


STRUT CLIPS


50

6

Installation of copper pipe to strut/channel • Channel clip sizes 15 mm to 300 mm• Suits 41 mm wide strut/channel and cantilever brackets• Finish: Electro-zinc plated (EG)/hot dip galvanised (HDG)/

polyester powder coating (PPC) brown

Channel Clip - CHC for Copper Pipe

Pipe Actual W x TSize Pipe (mm) Fastener(mm) OD

EG HDG (mm)CHC-015-CU-GAL CHC-015-CU-HDG 15 12.7 32 x 1.5 M6

CHC-016-CU-GAL CHC-016-CU-HDG 18 15.9 32 x 1.5 M6

CHC-020-CU-GAL CHC-020-CU-HDG 20 19 32 x 1.5 M6

CHC-023-CU-GAL 23 32 x 1.5 M6


CHC-029-CU-GAL CHC-029-CU-HDG 29 32 x 1.5 M6


CHC-035-CU-GAL 35 32 x 2.0 M8













PPC (mm)CHC-015-CU-PPC 15 12.7 32 x 1.5 M6

CHC-020-CU-PPC 20 19 32 x 1.5 M6

CHC-025-CU-PPC 25 25.4 32 x 1.5 M6

CHC-032-CU-PPC 32 31.8 32 x 2.0 M6

CHC-040-CU-PPC 40 38.1 32 x 2.0 M8

CHC-050-CU-PPC 50 51.2 32 x 2.5 M8

CHC-065-CU-PPC 65 63.5 32 x 2.5 M8

CHC-080-CU-PPC 80 76.2 32 x 2.5 M8

CHC-100-CU-PPC 100 101.6 32 x 2.5 M10

CHC-125-CU-PPC 125 127 32 x 2.5 M10

CHC-150-CU-PPC 150 152.4 32 x 3.0 M10

CHC-200-CU-PPC 200 203.2 32 x 3.0 M10

W

T


STRUT CLIPS



EG HDG (mm)

CHC-015-GWIR-GAL CHC-015-GWIR-HDG 15 21.3 32 x 1.5 M6











CHC-200-GWIR-GAL CHC-200-GWIR-HDG 200 219 32 x 3.0 M10

CHC-250-GWIR-GAL CHC-250-GWIR-HDG 250 273 32 x 3.0 M10

6

Installation of steel pipe to strut/channel • Channel clip sizes 15 mm to 250 mm• Suits 41 mm wide strut/channel and cantilever brackets• Finish: Electro-zinc plated (EG)/hot dip galvanised (HDG)

Channel Clip - CHC for Steel Pipe

W

T


STRUT CLIPS


52

6

Installation of PVC pipe to strut/channel • Channel clip sizes 40 mm to 375 mm• Suits 41 mm wide strut/channel and cantilever brackets• Finish: Electro-zinc plated (EG)/hot dip galvanised (HDG)/

polyester powder coating (PPC) white

Channel Clip - CHC for PVC Pipe


EG HDG (mm)

CHC-040-PVC-GAL CHC-040-PVC-HDG 40 43 32 x 2.0 M8











PPC (mm)

CHC-040-PVC-PPC 40 43 32 x 2.0 M8

CHC-050-PVC-PPC 50 55 32 x 2.5 M8

CHC-065-PVC-PPC 65 69 32 x 2.5 M8

CHC-080-PVC-PPC 80 82 32 x 2.5 M8

CHC-090-PVC-PPC 90 90 32 x 2.5 M8

CHC-100-PVC-PPC 100 110 32 x 2.5 M10

CHC-150-PVC-PPC 150 160 32 x 3.0 M10

CHC-225-PVC-PPC 225 251 32 x 3.0 M10

CHC-300-PVC-PPC 300 316 32 x 3.0 M10

CHC-375-PVC-PPC 375 400 32 x 3.0 M10

W

T


STRUT CLIPS


6


EG PPC (mm)

CHC-015-PPVC-PPC 15 21.3 32 x 1.5 M6

CHC-020-PPVC-PPC 20 26.7 32 x 1.5 M6

CHC-025-PPVC-PPC 25 33.7 32 x 2.0 M6

CHC-032-PPVC-PPC 32 42.2 32 x 2.0 M8

CHC-040-PPVC-PPC 40 48.2 32 x 2.5 M8

CHC-050-PPVC-PPC 50 60.3 32 x 2.5 M8

CHC-065-PPVC-PPC 65 75.3 32 x 2.5 M8

CHC-080-PPVC-PPC 80 88.9 32 x 2.5 M8

CHC-100-PPVC-PPC 100 114.3 32 x 2.5 M10

CHC-200-PPVC-GAL 200 219.1 32 x 3.0 M10

CHC-250-PPVC-GAL 250 280 32 x 3.0 M10

Installation of pressure PVC pipe to strut/channel • Channel clip sizes 15 mm to 250 mm• Suits 41 mm wide strut/channel and cantilever brackets• Finish: Electro-zinc plated (EG)/polyester powder

coating (PPC) white

Channel Clip - CHC for P/PVC Pipe

W

T



54


MEDIUM DUTY PIPE CLAMPS


7

ERIC15 ERIC16 ERIC18





56

7

Pipe Actual W x T L HS Max.Size Pipe OD (mm) (mm) (mm) Rec.(nb) (mm) Load

(N)

ERIC15 - 60 50 60.3 40 x 6.0 160 14 3500

ERIC15 - 76 65 76.1 40 x 6.0 175 14 3500

ERIC15 - 89 80 88.9 40 x 6.0 190 14 5000

ERIC15 - 114 100 113.3 40 x 6.0 215 14 6000

ERIC15 - 165 150 165.1 40 x 6.0 265 14 6000

ERIC15 - 219 200 219 40 x 6.0 315 14 6000

Medium duty support for Steel pipe • Steel saddle clamp sizes 50 nb to 200 nb• Attaches directly to horizontal or vertical structural member • Supports pipe close to wall or ceiling• Finish: Hot dip galvanised (HDG)

ERIC15 - Medium Duty Saddle Clamp forSteel Pipe

T L

W

HS





7


(N)

ERIC16 - 60 50 60.3 40 x 6.0 150 14 4000

ERIC16 - 76 65 76.1 40 x 6.0 167 14 4000

ERIC16 - 89 80 88.9 40 x 6.0 180 14 4000

ERIC16 - 114 100 113.3 40 x 6.0 204 14 4000

ERIC16 - 140 125 139.7 40 x 6.0 230 14 4000

ERIC16 - 165 150 165.1 40 x 6.0 256 14 4000

ERIC16 - 220 200 219 40 x 6.0 331 14 6000

ERIC16 - 273 250 273 40 x 6.0 384 14 7500

ERIC16 - 324 300 323.9 40 x 6.0 440 14 10000

Fastening of vertical & horizontal pipe services• Two piece bracket sizes 50 nb to 300 nb & 100 mm

to 150 mm copper pipe• Double bolted medium duty• Finish: Hot dip galvanised (HDG)

ERIC16 - Medium Duty Two Piece Clampfor Steel and Copper Pipe

Pipe Actual W x T L HS Max.Size Pipe OD (mm) (mm) (mm) Rec.(mm) (mm) Load

(N)

ERIC16 - 102 100 101.6 40 x 6.0 192 14 4000

ERIC16 - 127 125 127 40 x 6.0 218 14 4000

ERIC16 - 152 150 152.4 40 x 6.0 243 14 4000

For Copper Pipe

THS

L

W




58

7


(N)

ERIC18 - 60 50 60.3 40 x 6.0 150 14 2000

ERIC18 - 76 65 76.1 40 x 6.0 177 14 4000

ERIC18 - 89 80 88.9 40 x 6.0 180 14 4000

ERIC18 - 114 100 113.3 40 x 6.0 204 14 5000

ERIC18 - 165 150 165.1 40 x 6.0 256 14 5000

ERIC18 - 219 200 219 40 x 6.0 331 14 5000

ERIC18 - 273 250 273 40 x 6.0 384 14 7500

Adjustable suspension of horizontal & vertical pipeservices• Two piece bracket sizes 50 nb to 250 nb &

125 mm and 150 mm copper pipe• Adjustable yoke• Double bolted• Finish: Hot dip galvanised (HDG)

ERIC18 - Adjustable Clamp for Steel andCopper Pipe

Pipe Actual W x T L HS Max.Size Pipe OD (mm) (mm) (mm) Rec.(mm) (mm) Load

(N)

ERIC18 - 127 125 127 40 x 6.0 218 14 5000

ERIC18 - 152 150 152.4 40 x 6.0 243 14 5000

For Copper Pipe

T

L

W

HS

HS


HEAVY DUTY PIPE CLAMPS


8

ERIC30 ERIC31

Page 60 Page 61




60

8

Pipe Actual W x T L HS A Max.Size Pipe OD (mm) (mm) (mm) Rec.(mm) (mm) Load

(N)

ERIC30 - 168 150 165 75 x 10 324 22 260 contact factory








Heavy duty support for steel pipe • Steel saddle clamp sizes 150 mm to 500 mm• Attaches directly to horizontal or vertical structural member • Supports pipe close to wall or ceiling• Heavy duty • Finish: Hot dip galvanised (HDG)

ERIC30 - Heavy Duty Saddle Clamp for Steel Pipe

T LA

W

HS





8

Pipe Actual W x T L HS A Max.Size Pipe OD (mm) (mm) (mm) Rec.(mm) (mm) Load

(N)

ERIC31 - 168 150 165 75 x 10 318 M20 254 contact factory









Fastening of vertical & horizontal pipe services• Steel two piece bracket sizes 150 mm to 600 mm• Double bolted• Heavy duty • Finish: Hot dip galvanised (HDG)

ERIC31 - Heavy Duty Two Piece Clamp forSteel Pipe

THS

L

W

A



62


DOMESTIC PIPE CLIPS


9

BRC CU-HF CU-SAD CUS


FFC SPH HNG HST


SOW SPC - For Copper pipe SPC - For PVC pipe SPC - For P/PVC pipe


WB WB-PPC WB-ADJ



DOMESTIC PIPE CLIPS


64

Pipe Actual W x T L SSize Pipe OD (mm) (mm) (mm)(mm) (mm)

BRC-015-CU-PPC 15 13 25 x 1.7 25 7

BRC-020-CU-PPC 20 19 25 x 1.7 25 7

BRC-025-CU-PPC 25 25 25 x 1.7 25 7

BRC-032-CU-PPC 32 32 25 x 1.7 25 7

BRC-040-CU-PPC 40 38 25 x 1.7 25 7

BRC-050-CU-PPC 50 51 25 x 1.7 25 7

BRC-065-CU-PPC 65 64 25 x 1.7 25 7

BRC-080-CU-PPC 80 76 25 x 1.7 25 7

BRC-100-CU-PPC 100 102 25 x 1.7 25 7

• Bracket clips for sizes 15 mm to 100 mm • Two piece for fast convenient installation • Finish: Polyester powder coating (PPC) brown

Bracket Clip - BRC for Copper Pipe

9

T

L

W

S

S


DOMESTIC PIPE CLIPS


Pipe Actual W x T HSSize Pipe OD (mm) (mm)(mm) (mm)

CU-HF-015-PPC 15 12.7 12 x 1.2 4.8

CU-HF-020-PPC 20 19 16 x 1.2 4.8

Supports copper tube• Half saddle clip sizes 15 mm and 20 mm• Single fastener• Finish: Polyester powder coating (PPC) brown

Half Saddle Clip - CU-HF for Copper Pipe

Pipe Actual W x T HSSize Pipe OD (mm) (mm)(mm) (mm)

CU-SAD-006 6 6 11 x 0.6 4.0

CU-SAD-008 8 8 11 x 0.6 4.0

CU-SAD-010 10 10 11 x 0.6 4.0

CU-SAD-015 12 13 13 x 0.6 5.3

CU-SAD-016 16 16 15 x 0.6 5.3

CU-SAD-020 20 19 15 x 0.6 5.3

CU-SAD-025 25 25 15 x 0.6 5.3

Light duty support for copper tubing • Copper saddle sizes 6 mm to 25 mm• Attaches directly to wall or ceiling • Supports pipe close to wall or ceiling• Material: Copper

Copper Saddles - CU-SAD for Copper Pipe

9

W

HS T

T

HS

W


DOMESTIC PIPE CLIPS


66

Pipe Actual W x T L HSSize Pipe OD (mm) (mm) (mm)(mm) (mm)

CUS-006-CU-PPC 6 6 13 x 0.7 32 5

CUS-008-CU-PPC 8 8 13 x 0.7 34 5

CUS-010-CU-PPC 10 10 13 x 0.7 36 5

CUS-012-CU-PPC 12 13 13 x 0.7 39 5

CUS-016-CU-PPC 16 16 13 x 0.7 47 5

CUS-020-CU-PPC 20 19 13 x 0.8 50 5

CUS-025-CU-PPC 25 25 20 x 1.1 60 5

CUS-032-CU-PPC 32 32 20 x 1.1 75 5

CUS-040-CU-PPC 40 38 20 x 1.1 90 6.5

CUS-050-CU-PPC 50 51 20 x 1.1 100 6.5

Light duty support for copper tubing • Copper saddle sizes 6 mm to 50 mm• Attaches directly to horizontal or vertical wall • Supports pipe close to wall or ceiling• Finish: Polyester powder coating (PPC) brown

Copper Saddle - CUS for Copper Pipe

9

T

L

W

HS


DOMESTIC PIPE CLIPS


Pipe Actual W x T L HSSize Pipe OD (mm) (mm) (mm)(mm) (mm)

FFC-040-PVC-PPC 40 43 20 x 1.30 80 5

FFC-050-PVC-PPC 50 55 20 x 1.30 98 5

FFC-065-PVC-PPC 65 69 20 x 1.30 115 6

FFC-075-PVC-PPC 75 75 20 x 1.30 125 6

FFC-080-PVC-PPC 80 82 20 x 1.30 130 6

FFC-090-PVC-PPC 90 90 20 x 1.30 140 6

FFC-100-PVC-PPC 100 110 20 x 1.30 150 6

Horizontal and vertical support for close fit PVC pipe • Flush fitting clip sizes 40 mm to 100 mm• Suits DWV and PVC pipe• Finish: Polyester powder coating (PPC) white

Flush Fitting Clip - FFC for PVC Pipe

9

T

L

W

HS


DOMESTIC PIPE CLIPS


68

Pipe Actual W x T Strap HSSize Pipe OD (in) Length (L x W)(mm) (mm) (mm) (mm)

SPH-040-PVC-PPC 40 43 20 x 1 450 9 x 6

SPH-050-PVC-PPC 50 55 20 x 1 450 9 x 6

SPH-065-PVC-PPC 65 69 20 x 1 450 9 x 6

SPH-080-PVC-PPC 80 82 20 x 1 450 9 x 6

SPH-090-PVC-PPC 90 90 20 x 1 450 9 x 6

SPH-100-PVC-PPC 100 110 20 x 1 450 9 x 6

Suspends PVC pipe services• Hanging clip for sizes 40 mm to 100 mm • Suits DWV and PVC pipe• Cut to length• 450 mm strap• Finish: Polyester powder coating (PPC) white, EG strap

Single Piece Hanger - SPH for PVC Pipe

9

T

450

W

HS


DOMESTIC PIPE CLIPS


Pipe Actual W x T Strap HSSize Pipe OD (mm) Length (mm)(mm) (mm) (mm)

HNG-040-PVC-PPC 40 43 20 x 3 450 10

HNG-050-PVC-PPC 50 55 20 x 3 450 10

HNG-065-PVC-PPC 65 69 20 x 3 450 10

HNG-080-PVC-PPC 80 82 20 x 3 450 10

HNG-090-PVC-PPC 90 90 20 x 3 450 10

HNG-100-PVC-PPC 100 110 20 x 3 450 10

HNG-150-PVC-PPC 150 160 25 x 3 450 10

Suspends PVC pipe services• Hanging clip for sizes 40 mm to 150 mm • Suits DWV and PVC pipe• Double bolted• 450 mm strap• Finish: Polyester powder coating (PPC) white

Hanging Clip - HNG for PVC Pipe

9

T

450

W

HS


DOMESTIC PIPE CLIPS


70

L W T X Surface(mm) (mm) (mm) (mm) Finish Bolt

(Screw)

HST-GAL-300 300 25 1.2 110 EG Cup head 1/4" x 1"

HST-GAL-600 600 25 1.2 230 EG Cup head 1/4" x 1"

Vertical hanging support extension• Hanging strap sizes 300 mm and 600 mm • Suits all SPC single piece & BRC bracket clips • Convenient cup head fastener• Finish: Electro-zinc plated (EG)

Hanging Strap - HST for SPC Clip

9

Pipe Actual W x T H HSSize Pipe OD (mm) (mm) (mm)(mm) (mm)

SOW-040-PVC-PPC 40 43 20 x 3.0 70 5

SOW-050-PVC-PPC 50 55 20 x 3.0 85 5

SOW-065-PVC-PPC 65 69 20 x 3.0 95 6

SOW-080-PVC-PPC 80 82 20 x 3.0 105 6

SOW-090-PVC-PPC 90 90 20 x 3.0 110 6

SOW-100-PVC-PPC 100 110 20 x 3.0 135 6

Horizontal and vertical PVC pipe services • Stand off wall clip for sizes 40 mm to 100 mm • Suits DWV and PVC pipe• Finish: Polyester powder coating (PPC) white

Stand off Wall Clip - SOW for PVC Pipe

T

T

W

W

H

L

X

HS


DOMESTIC PIPE CLIPS


9


SPC-015-CU-PPC 15 13 25 x 1.0 25 7 x 7

SPC-020-CU-PPC 20 19 25 x 1.0 25 7 x 7

SPC-025-CU-PPC 25 25 25 x 1.2 25 7 x 7

SPC-032-CU-PPC 32 32 25 x 1.2 25 7 x 7

SPC-040-CU-PPC 40 38 25 x 1.2 25 7 x 7

SPC-050-CU-PPC 50 51 25 x 1.4 25 7 x 7

SPC-065-CU-PPC 65 64 25 x 1.5 25 7 x 7

SPC-080-CU-PPC 80 76 25 x 1.5 25 7 x 7

SPC-100-CU-PPC 100 102 25 x 1.5 25 7 x 7

SPC-125-CU-PPC 125 127 25 x 1.7 25 7 x 7

SPC-150-CU-PPC 150 152 25 x 1.7 25 7 x 7

Supports copper pipe services with wall bracket,hanging strap or ERIC 1010• Single piece clip for sizes 15 mm to 150 mm • One piece clip for fast convenient installation• Available in stainless steel grade 316• Finish: Polyester powder coating (PPC) brown

Single Piece Clip - SPC for Copper Pipe

T

L

W

SS


DOMESTIC PIPE CLIPS


72

9


SPC-040-PVC-PPC 40 43 25 x 1.2 25 7 x 7

SPC-050-PVC-PPC 50 55 25 x 1.4 25 7 x 7

SPC-065-PVC-PPC 65 69 25 x 1.5 25 7 x 7

SPC-080-PVC-PPC 80 82 25 x 1.5 25 7 x 7

SPC-090-PVC-PPC 90 90 25 x 1.5 25 7 x 7

SPC-100-PVC-PPC 100 110 25 x 1.5 25 7 x 7

SPC-150-PVC-PPC 150 160 25 x 1.7 25 7 x 7

Supports PVC pipe services with wall bracket,hanging strap or ERIC 1010• Single piece clip for sizes 40 mm to 150 mm • One piece clip for fast convenient installation• Finish: Polyester powder coating (PPC) white

Single Piece Clip - SPC for PVC Pipe

T

W

SS

L


DOMESTIC PIPE CLIPS


9


SPC-015-PPVC-PPC 15 21 25 x 1.0 25 7 x 7

SPC-020-PPVC-PPC 20 27 25 x 1.0 25 7 x 7

SPC-025-PPVC-PPC 25 33 25 x 1.2 25 7 x 7

SPC-032-PPVC-PPC 32 42 25 x 1.2 25 7 x 7

SPC-040-PPVC-PPC 40 48 25 x 1.4 25 7 x 7

SPC-050-PPVC-PPC 50 60 25 x 1.4 25 7 x 7

SPC-065-PPVC-PPC 65 75 25 x 1.4 25 7 x 7

SPC-100-PPVC-PPC 100 114 25 x 1.5 25 7 x 7

Supports Pressure pipe services with wall bracket, hanging strap or ERIC 1010• Single piece clip for sizes 15 mm to 100 mm • One piece clip for fast convenient installation• Finish: Polyester powder coating (PPC) white

Single Piece Clip - SPC for Pressure PVC Pipe

T

W

SS

L


DOMESTIC PIPE CLIPS


74

W x T L R HS(mm) (mm) (mm) (mm)

WB-GAL 25 x 1.5 85 20 6.5

Attaches to wall/ceiling with hanging strap, single piece clip, bracket clip • Wall bracket for all sizes of HST, SPC & BRC products • 20 mm adjustment• Supplied with cup head fastener• Finish: Electro-zinc plated (EG)

Wall Bracket - WB

9


WB-PPC 22 x 1.5 85 20 6.5

Attaches to wall/ceiling with hanging strap, single piece clip or bracket clip • Wall bracket for all sizes of HST, SPC, BRC and

ERIC 1010 products • 20 mm adjustment• Supplied with cup head fasteners• Finish: Polyester powder coating (PPC) white/galvabond

Wall Bracket - PPC

HSR

T LW

HSR

T LW


DOMESTIC PIPE CLIPS


Attaches to wall/ceiling with hanging strap, single piece clip or bracket clip • Wall bracket for all sizes of HST, SPC, BRC and

ERIC 1010 products • 47 mm adjustment• Supplied with cup head fasteners• Finish: Electro-zinc plated (EG)

Adjustable Stand Off Bracket - WB-ADJ

9


WB-ADJ-GAL 22 x 2.0 104 47 6.6

W

TR

L

HS



76




10

MACRO V ISO EQV EQVS EQZS


EQLS

Page 80

EQ-ZAB

Page 81




78

10

d W x T Sc x L(mm)

582450 200 23 x 1.5 M6 x 40 582470 224 23 x 2.0 M6 x 40 582480 250 23 x 2.0 M6 x 40 582490 280 23 x 2.0 M6 x 40 582500 300 23 x 2.0 M6 x 40 582510 315 23 x 2.0 M6 x 40 582530 355 23 x 2.0 M6 x 40 582540 400 23 x 2.0 M6 x 40 582550 450 25 x 2.5 M6 x 40 582560 500 25 x 2.5 M6 x 40 582580 560 25 x 2.5 M6 x 40 582590 600 25 x 2.5 M6 x 40 582600 630 25 x 2.5 M6 x 40 582810 710 25 x 2.5 M6 x 40

MACRO V ISO

Circular ducting clamp with M8/M10 combi boss• EPDM rubber insulation for sound reduction

compliant with DIN 4109• M6 multi-function screw with combination head

(slot & crosshead), with retaining washer• Steel profile (W x T)• For duct diameter from 200 mm - 710 mm• Temperature rating from -50°C up to +110°C• Fire rating B2 acc. to DIN EN 13501-1:E• Finish: Electro-zinc plated (EG)

d

Sc

L

M8/M10

T

W

- 50°/+110°BB22DIN EN13501-

1:E




10

H W D E(mm) (mm) (mm) (mm)

597590 60 40 10 4.2

EQV

Ducting fixing• V shaped bracket to form around spiral duct• Fits on to various duct diameters• Fixing with blind rivets or self drilling screws• Material 40 x 2.0 mm (W x T)• Finish: Electro-zinc plated (EG)

H

8.5

8.5x20

E

E T

W

D

H W D E(mm) (mm) (mm) (mm)

597770 60 40 8.4 4.2 1

EQVS

Ducting fixing• V shaped bracket to form around spiral duct• Type S is supplied with sound reduction mounting

compliant with DIN 4109• Fits on to various duct diameters• Fixing with blind rivets or self drilling screws• Material 40 x 2.0 mm (W x T)• Finish: Electro-zinc plated (EG)

H

8.5

8.5x20

E

E T

W

D




80

10

C D E A(mm) (mm) (mm) (mm)

597790 20 8.4 40 30

EQZS

Duct fixing bracket Z-shaped• Quick installation of square ducts• Supplied with sound reduction mounting compliant

with DIN 4109• Fixing with blind rivets or self drilling screws• Easy height adjustment by using threaded rod and

hex nuts• Material 35 x 2.0 mm (W x T)• Finish: Electro-zinc plated (EG)

D

W

60 mm

E

T

A

C

4.2

L C D E(mm) (mm) (mm) (mm)

597791 50 20 8.4 40 597780 85 20 8.4 40 597792 130 20 8.4 40

EQLS

Duct fixing bracket L-shaped• Quick fixing of square ducts• Supplied with sound reduction mounting compliant

with DIN 4109• Different lengths available for different applications• Fixing with blind rivets or self drilling screws• Easy height adjustment by using threaded rod and


W

D

L4.2

E

T

C




10

C D E A(mm) (mm) (mm) (mm)

597790 20 11 40 30

EQ-ZAB

Duct fixing bracket Z-shaped• Quick installation of square ducts• Fixing with blind rivets or self drilling screws• Easy height adjustment by using threaded rod and


D

W

60 mm

E

T

A

C

4.2



82


PLASTIC PIPE FIXINGS


11

CADDY® SUPERKLIP TSM TSMI





84

11PIPE FIXINGS CADDY® SUPERKLIP

Tube and Pipe Clamp• Size Range: 12 mm to 64 mm• Pushing the tube into the clamp closes and

locks the pipe clamp• Fasten with either wood screw, dual threaded screw

with or without collar, nail with collar or M6 threaded rod• Age resistant, UV resistant, suitable for outdoor

applications• Color: Gray

Steel Pipe Copper Tubing A B C Max. Rec.Description OD (mm) OD (mm) (mm) (mm) (mm) Load (N)

389001 CADDY SUPERKLIP 12 mm 12.7 11.8 - 14.3 14.5 29.9 200389002 CADDY SUPERKLIP 15 mm 14.3 - 16.8 14.5 32.0 220389003 CADDY SUPERKLIP 17 mm 19 16.8 - 19.5 16.0 35.4 235389004 CADDY SUPERKLIP 20 mm 21.3 19.5 - 21.8 16.3 39.4 250389005 CADDY SUPERKLIP 22 mm 21.8 - 24.8 16.5 42.0 270389006 CADDY SUPERKLIP 25 mm 26.7 25.4 24.8 - 27.8 17.0 45.1 300389007 CADDY SUPERKLIP 28 mm 27.8 - 31.2 17.0 48.9 320389008 CADDY SUPERKLIP 32 mm 33.4 31.8 31.2 - 35.5 17.5 54.4 370389009 CADDY SUPERKLIP 36 mm 38.1 35.5 - 39.5 18.0 59.4 400389011 CADDY SUPERKLIP 40 mm 42.2 39.5 - 43.5 19.5 64.2 440389012 CADDY SUPERKLIP 47 mm 48.3 46.5 - 50.5 19.5 72.8 470389013 CADDY SUPERKLIP 51 mm 51.2 50.5 - 55.5 20.0 78.7 500389014 CADDY SUPERKLIP 59 mm 60.3 63.5 58.5 - 64 21.0 88.2 540

A

C

B




11

TSM Non-metallic Tubing Channel Clip• Size Range: 10 mm to 41 mm CT sizes• Plenum rated for UL 2043• Use for installation of refrigeration, A/C tubing and

PEX piping in horizontal and vertical channels• Requires no tools for installation - Turn in installation• Fits any standard 41 mm wide strut channel

PIPE FIXINGS TSM

Description OD Size Cu OD PEX (mm OD) (mm) OD (mm)

389046 TSM0037 10 mm 10 mm389047 TSM0050 12 mm 12 mm389048 TSM0062 16 mm 15 mm 16 mm389049 TSM0075 20 mm 20 mm 20 mm389053 TSM0087 22 mm 22 mm389054 TSM0112 28 mm 28 mm389055 TSM0137 35 mm 35 mm 32 mm389056 TSM0162 41 mm 42 mm 40 mm

OD

Hand turn-in installation



86

PLASTIC PIPE FIXINGS 11

TSMI Non-metallic Tubing Channel Clip for Insulated Lines• Size Range: 15 mm to 54 mm CT sizes• Plenum rated for UL 2043• Use for installation of refrigeration, A/C tubing and

PEX piping in horizontal and vertical channels• Requires no tools for installation• Fits any standard 41 mm wide strut channel• Allows installation of copper tubing together with insulation

of either 9 mm or 13 mm thickness

PIPE FIXINGS TSMI

B

OD

Description OD Size Cu OD PEX (mm) (mm) OD (mm)

389057 TSMI0062 15 16.0 16.0389058 TSMI0075 20 19.0 19.0389059 TSMI0087 22 23.0 23.0389061 TSMI0100 25 25.0 25.0389062 TSMI0112 28 29.0 29.0389063 TSMI0125 32 32 32389064 TSMI0137 35 35.0 35.0389065 TSMI0150 40 40 40389066 TSMI0162 42 42 42389067 TSMI0200 50 50389068 TSMI0212 54 51


BEAM CLAMPS


12

TK300 BTK310 HB2


315

Page 90


BEAM CLAMPS


88

12TK300

Beam clamp• To fix on to beams without welding or drilling• Compact cast body• VdS and FM approved• Hollow pointed bolt for better grip• Finish: Electro-zinc plated (EG)

Ø A Max. Rec.(mm) (mm) Load (N)

389500 9 18 VdS - 1200389510 11 18 VdS FM 2500389520 13 26 VdS FM 3500

Ø

TOP MOUNT

BOTTOM MOUNT

A

May be mounted in either position

B

H


BEAM CLAMPS


Ø

TOP MOUNT

BOTTOM MOUNT

A


B

H

12

Description Ø A Max. Rec.(mm) (mm) Load (N)

389890 M10 31.8 VdS FM 2500388890 M12 31.8 VdS FM 3500598501 BTK310-11 mm 11 31.8 VdS FM 2500598502 BTK310-13 mm 13 31.8 VdS FM 3500

Beam clamp• To fix on to beams without welding or drilling• For beam thickness up to 31.8 mm• For rod sizes M10 & M12• FM approved • Hollow pointed bolt for better grip• Also available with Imperial threads • Finish: Electro-zinc plated (EG)

BTK310

A

TOP MOUNT

BOTTOM MOUNT


Ø


BEAM CLAMPS


90

12

6 Nm

2000 N 950 N 2000 N 2500 N 700 N 800 N

HB2

Clamp HB2• Swivel type fixing• Fix against the side of a steel beam• Finish: Electro-zinc plated (EG) or

Hot dip galvanised (HDG)

A Finish (mm)

336030 < 24 EG336040 < 24 HDG

Malleable Iron Purlin Clamp Black• Size Range: M10 rod size• Surface Finish: Black, Electro-zinc plated• Structural attachment to lower flange of metal beams or

purlins with 45° flanges up to 50 mm long and 90° flanges up to 38 mm high

• Set screw made of hardened steel• Conforms with Federal Specification WW-H-171 (Type 23),

Manufacturers Standardization Society ANSI/MSS-SP-58 (Type 23); install in accordance with ANSI/MSS-SP-69

• Setscrew must be tightened and torqued onto the sloped side of the I-beam

RS

A

C B

Part RS A B C Set Max. Max. Rec. Number (mm) (mm) (mm) Screw Pipe Size Load (N)

Plain Finish3150037PL M10 50 38 25 3/8” 100 1800Electro-zinc Plated Finish3150037EG M10 50 38 25 3/8” 100 1800

PURLIN HANGER 315




13

H H-i H-ST


H-CT

Page 95

H-CTB H-MA H-Ti/T


H-S

Page 98

H-SR H-MSM H-PSM


EM

Page 100

EM-SM EM-P EM-M


VF

Page 102




92

13

VAFT J J-MA


J-Ti/T

Page 104

EBC EBC-MSM EBC-M


EBC-P

Page 106

INC8 122 122 MA


122 Ti

Page 108

122 T10 EER EERS


EER-Ti/T

Page 110




13

EER-MA TDH TDHP MK2


HW

Page 112

WDC/WDC-M GTD PW2


PW2 Ti/T

Page 114

4Z34-CTS K AB


Ti/T

Page 116

B-Ti/T MAB MEBN

Page 116 Page 117




94

13

Description A Max. Rec.(mm) Load (N)

170010 2H4 2-3 700 170020 4H24 3-8 900170030 4H58 8-14 900170040 4H912 14-20 900

H


170150 4H24i 3-8 150170250 4H58i 8-14 150

H-i

Ø 6,8 mm

A

A

M6

Hammer-on beam clamp• Spring steel• For fixing wire or chain• Surface finish: CADDY® COAT

Hammer-on threaded rod hanger• Spring steel• With thread impression on tab for M6 fasteners• Surface finish: CADDY® COAT




13H-ST

Description A(mm)

173420 2H4ST3 2-3 171500 4H24ST3 3-8 171530 4H58ST3 8-14 171640 4H912ST3 14-20

H-CT


178510 2H4CT 2-3 150178520 4H24CT 3-8 150178530 4H58CT 8-14 150178540 4H912CT 14-20 150

9 mm

2 mm

A

69 mm

Hammer-on strap clamp• Spring steel• Bend strap to retain tubing on flange• Surface finish: CADDY® COAT

Hammer-on beam clamp for cable ties• Spring steel• With slots to support pipe or tubing using cable ties• Surface finish: CADDY® COAT

A

B




96

13H-CTB

Description A B Max. Rec.(mm) (mm) Load (N)

170170 2H4CTBW 2-3 10-70 150170180 4H24CTBW 3-8 10-70 150170190 4H58CTBW 8-14 10-70 150170200 4H912CTBW 14-20 10-70 150

170210 2H4CTBB 2-3 10-70 150170220 4H24CTBB 3-8 10-70 150170240 4H58CTBB 8-14 10-70 150170260 4H912CTBB 14-20 10-70 150

H-MA

Description A Ø Max. Rec.(mm) (mm) Load (N)

173270 M8MA4 2-3 M8 700173280 M8MA24 3-8 M8 700173290 M8MA58 8-14 M8 700173300 M8MA912 14-20 M8 700173310 M10MA4 2-3 M10 700173320 M10MA24 3-8 M10 700173330 M10MA58 8-14 M10 700173340 M10MA912 14-20 M10 700

Ø

A

A

B

Hammer-on beam clamp with cable tie• Spring steel• Comes equipped with cable ties to support pipe/tubing• Surface finish: CADDY® COAT

Hammer-on threaded rod hanger• Spring steel• With riveted fitting for threaded rods• Inside threads M8, M10• Surface finish: CADDY® COAT




13H-Ti/T

Description A Ø 1 Ø 2 Max. Rec.(mm) (mm) Load (N)

174810 M6Ti4 2-3 M6 7 700174820 M6Ti24 3-8 M6 7 900174830 M6Ti58 8-14 M6 7 900174840 M6Ti912 14-20 M6 7 900174900 M8Ti4 2-3 M8 8.5 700174910 M8Ti24 3-8 M8 8.5 900174920 M8Ti58 8-14 M8 8.5 900174930 M8Ti912 14-20 M8 8.5 900174990 M10Ti4 2-3 M10 11 700175000 M10Ti24 3-8 M10 11 900175010 M10Ti58 8-14 M10 11 900175020 M10Ti912 14-20 M10 11 900160000 TI04 2-3 11 11 700160010 TI024 3-8 11 11 900160020 TI058 8-14 11 11 900160030 TI0912 14-20 11 11 900

Ø 1

Ø 2

A

Hammer-on threaded rod hanger• Spring steel• With riveted fitting for threaded rods• Inside thread M6, M8, M10 and plain (11 mm)• Surface finish: CADDY® COAT




98

13


175480 S4 2-3 700172030 S24 3-8 900171760 S58 8-14 900171770 S912 14-20 900

H-S


175540 SR4 2-3 700171810 SR24 3-8 900175550 SR58 8-14 900172020 SR912 14-20 900

H-SR

A

25 x 6 mm

A

Hammer-on strap hanger clip• Spring steel• For fixing straps same direction as the beam• Surface finish: CADDY® COAT

Hammer-on strap hanger clip• Spring steel• For fixing straps• Surface finish: CADDY® COAT




13H-MSM


160040 812M4SM 2-3 18-30 120160050 812M24SM 3-8 18-30 120160060 812M58SM 8-14 18-30 120160070 812M912SM 14-20 18-30 120

H-PSM


175210 12P4SM 2-3 22-30 70175220 12P24SM 3-8 22-30 70175230 12P58SM 8-14 22-30 70175240 12P912SM 14-20 22-30 70

Ø

A

Ø

A

Hammer-on finger close pipe clamp• Spring steel• Beam clamp with pipe clamp with closing mechanism• Surface finish: CADDY® COAT

Hammer-on pipe clamp• Spring steel• Beam clamp with pipe clamp• Surface finish: CADDY® COAT




100

13EM

Description A Max. Rec. Max. Rec.(mm) Load (N) A Load (N) B

170050 EM24 3-8 450 150170060 EM58 8-14 450 150170070 EM912 14-20 450 150

B


170530 EM24SM 3-8 330172060 EM58SM 8-14 330171850 EM912SM 14-20 330

EM-SM

M6 x 11

M6

M6

M6

M6

A

A

9 x 2 mm

Hammer-on clip• Spring steel• Hornizontal and vertical inside thread M6• Surface finish: CADDY® COAT

Hammer-on clip with staked stud• Spring steel• Hornizontal and inside thread M6• Vertical bolt M6 x 11 mm• Surface finish: CADDY® COAT




13EM-P

Description A Ø Max. Rec.(mm) (mm) Load (N) B

172150 8EP24 3-8 18-22 110172160 8EP58 8-14 18-22 110175100 8EP912 14-20 18-22 110

EM-M


160120 812EM24 3-8 18-30 330160130 812EM58 8-14 18-30 330160140 812EM912 14-20 18-30 330171740 16EM24 3-8 30-35 330171490 16EM58 8-14 30-35 330173570 16EM912 14-20 30-35 330171800 20EM24 3-8 35-42 330171950 20EM58 8-14 35-42 330173580 20EM912 14-20 35-42 330171960 24EM24 3-8 42-50 330171970 24EM58 8-14 42-50 330173590 24EM912 14-20 42-50 330173600 32EM24 3-8 50-60 330173610 32EM58 8-14 50-60 330173620 32EM912 14-20 50-60 330

A

Ø

Ø

A M6

M6

Hammer-on pipe clamp• Spring steel• Beam clamp with pipe clamp• Surface finish: CADDY® COAT

Hammer-on finger close pipe clamp• Spring steel• Beam clamp with pipe clamp with closing mechanism• Surface finish: CADDY® COAT




102

13Rod Clip VF (Vertical Flange)

A Max. Rec. (mm) Load (N)

VF14 179850 1.5-6 600

VAFT

Description

190330 VAFT

VF hammer-on clip• Spring steel• For fixing wire or chain• Surface finish: CADDY® COAT

Installation tool• Installation tool for VF & AF assemblies• Used to install the AF or VF rod clips from the floor




13


170370 J1 1.5 - 4 700171590 J2 4 - 6.5 700

J

J-MA


173360 M8MAJ1 1.5 - 4 M8 700173370 M10MAJ1 1.5 - 4 M10 700173390 M8MAJ2 4 - 6.5 M8 700173400 M10MAJ2 4 - 6.5 M10 700

Ø 6.8 mm

A

42 mm50 mm

≥ 10 mm

≥ 10 mm

A

Ø

Hammer-on purlin clip• Spring steel• For fixing wire or chain• Surface finish: CADDY® COAT

Hammer-on C purlin rod clip• Spring steel• Size range: M8 and M10 rod sizes• Used to support M8 and M10 threaded rod from purlin

beam flanges 1.5 mm thru 6.5 mm thick• Surface finish: CADDY® COAT




104

13

Description A Ø 1 Ø 2 Max. Rec.(mm) (mm) (mm) Load (N)

174960 M8TiJ1 1.5 - 4 M8 8.5 700175050 M10TiJ1 1.5 - 4 M10 11 700174970 M8TiJ2 4 - 6.5 M8 8.5 700175060 M10TiJ2 4 - 6.5 M10 11 700

J-Ti/T

EBC

Description A Ø 1-2 Max. Rec.(mm) (mm) Load (N)

160220 T10J1 1.5 - 4 11 700160230 T10J2 4 - 6.5 11 700

Description A M Max. Rec.(mm) Load (N)

170380 EBC <16 6 450

Ø 10.5 mm

≥ 10 mm

M6

Ø 2

Ø 1

M6

M6

A

A

Hammer-on C purlin rod clip• Spring steel• Size range: M8 and M10 rod sizes• Used to support M8 and M10 threaded rod from purlin

beam flanges 1.5 mm thru 6.5 mm thick• Surface finish: CADDY® COAT

Beam clamp• Spring steel• Set screw• Surface finish: CADDY® COAT




13

3Nm

EBC-MSM


160180 EBC812MSM <16 18-30 110172660 EBC16MSM <16 30-35 110172670 EBC20MSM <16 35-42 110172680 EBC24MSM <16 42-50 110172690 EBC32MSM <16 50-60 110

EBC-M

Description A B Max. Rec.(mm) (mm) Load (N) B

160200 EBC812M <16 18-30 450172590 EBC16M <16 30-35 450172600 EBC20M <16 35-42 450172610 EBC24M <16 42-50 450172620 EBC32M <16 50-60 450

A

A Ø

Ø B

Beam clamp with finger close pipe clamp• Spring steel• Beam clamp with pipe clamp with closing mechanism• Surface finish: CADDY® COAT

Beam clamp with finger close pipe clamp• Spring steel• Beam clamp with pipe clamp with closing mechanism• Surface finish: CADDY® COAT




106

13EBC-P


172700 EBC8P <16 18-22 110172710 EBC12P <16 22-30 110172720 EBC16P <16 30-35 110


336290 INC8 13 450

INC8

Ø

A

6Nm

A

M8 x 25

Beam clamp with pipe clamp• Spring steel• Beam clamp with pipe clamp• Surface Finish: CADDY® COAT

Beam clamp• Spring steel• Beam clamp set that allows strut channel to be fixed

between 2 flanges of an H hot rolled beam• Surface Finish: CADDY® COAT




13


171690 122 ≤ 2.8 450

122

122 MA


174690 122 M8MA ≤ 2.8 M8 450174700 122 M10MA ≤ 2.8 M10 450

Ø 6.8 mm≥ 15 mm

35º

A

≥ 15 mm

35º

A

Ø

Purlin clip• Purlin hanger suitable to be fixed on flanges of a

purlin that have a 35º angle• Surface Finish: CADDY® COAT

Purlin rod clip• Purlin hanger suitable to be fixed on flanges of a

purlin that have a 35º angle• With riveted fitting for threaded rods• Inside thread M8, M10• Surface Finish: CADDY® COAT




108

13


174980 122M8Ti ≤ 2.8 M8 8,5 450175070 122M10Ti ≤ 2.8 M10 11 450

122 Ti


160240 122 T10 ≤ 2.8 11 11 450

122 T10

≥ 15 mm

35º

A

≥ 15 mm

35º

A


purlin that have a 35º angle• With riveted fitting for threaded rods• Inside thread M8, M10• Surface finish: CADDY® COAT


purlin that have a 35º angle• With riveted fitting for threaded rods• Surface finish: CADDY® COAT




13


171470 EER0.8 - 2 4502 - 3 900

EER

EERS


173080 EERS0.8 - 2 4502 - 3 900

A

Ø 7 mm

Ø 6.80 mm

Ø 7 mm

6 mm

25 mm

A

Decking clip• Spring steel• For fixing wire or chain• Surface Finish: CADDY® COAT

Decking clip with strap hanger• Spring steel• For fixing straps• Surface Finish: CADDY® COAT




110

13EER-Ti/T

Description A Ø 1 Ø 2 Max. Rec.(mm) M/mm (mm) Load (N) B

173130 EERM8Ti0.8 - 2 M8 8.5 4502 - 3 900

173140 EERM10Ti0.8 - 2 M10 11 4502 - 3 900

160250 EERT100.8 - 2 11 11 4502 - 3 900

EER-MA


173180 EERM8MA0.8 - 2 M8 4502 - 3 M8 700

173190 EERM10MA0.8 - 2 M10 450

2-3 M10 700

Ø1

Ø2

Ø 7 mm

A

Ø

Decking clip with rod hanger• Spring steel• With riveted fitting for threaded rods• Inside thread M8, M10 or 11 mm• Surface finish: CADDY® COAT

Decking clip with rod hanger• Spring steel• With riveted fitting for threaded rods• Inside thread M8, M10• Surface finish: CADDY® COAT




13

Description

179920 TDH179930 TDHM6179940 TDHM8179950 TDHM10179510 TDHiM8179945 TDHAM8179955 TDHAM10

TDH

A Max. Rec.mm Load (N)

0.63 - 0.70 6000.70 - 0.80 7000.80 - 1.00 8001.00 - 1.20 10001.20 - 1.50 1200

> 1.50 1500TDH iM8 200

Description

159441 TDHP MK2159442 BLADE SET

TDHP MK2

VKM

TDH M

TDH iM8

TDH AM8TDH AM10

TDH

Ø 10.5 mm

Ø 6.8 mmØ 6.8 mm

Ø 14 mm

Ø M6,8,10Ø M8

M10

Ø M8

23 mm

19 mm

Max. 50 mm Max. 50 mm

A

Ø 10.5 mm

Decking hanger• Spring steel• Without thread connection• Allows quick fixing against trapeze type ceilings• Surface Finish: CADDY® COAT

Decking hole punch tool• Makes holes in the side of trapeze ceilings• Painted




112

13HW

Description A B C M dº(mm) (mm) (mm)

187280 HW8 25 12 12 M8 15° 187290 HW10 25 12 12 M10 15° 187300 HW12 25 16 16 M12 15° 188740 HW6M 19 9.5 9.5 M6 15° 188780 HW8M 19 9.5 9.5 M8 15° 188840 PHW6 18 9.5 9.5 M6 25° 188850 PHW8 18 9.5 9.5 M8 25°

Description Ø Max. Rec.Load (N)

160920 WDCM8 M8 900160930 WDCM10 M10 900

WDC/WDC-M

> 10 mm

53 mmØ

30.8 mm

22 mm

43 - 45 mm

A

Mdº

C

B

Wedge nut for Holorib• V shaped nuts for Holorib ceilings• Surface finish: Electro-zinc plated

Decking insert• Spring steel• Hole accepts M8 or M10 bolts or rod• Surface finish: CADDY® COAT




13GTD

Description B C Ø Max. Rec.(mm) M/mm (mm) Load (N)

160330 M8GTD12-17 12-17 >14 M8 900160340 M10GTD12-17 12-17 >14 M10 900160360 M8GTD17-22 17-22 >16 M8 900160370 M10GTD17-22 17-22 >16 M10 900160380 10GDT12-17 12-17 >14 10.5 900160390 10GTD17-22 17-22 >16 10.5 900

Description Max. Rec.Load (N)

175590 PW2 700

PW2

B

C

Ø

55 mm

19.5 mm

12.5 mm

37.5 mm

7.8 mm

2 mm

6.8mm

9mm

Decking insert with rod hanger• For fixing to metal decking with hole for threaded rods• Inside thread M8, M10 or a hole 11 mm• Surface Finish: CADDY® COAT

Purlin clip• Spring steel• For fixing wire or chain• Surface Finish: CADDY® COAT



114

SPRING STEEL FIXING & FASTENERS 13PW2 Ti/T

Description Ø 1 Ø 2 Max. Rec.(mm) (mm) Load (N) B

175610 PW2M8Ti IN M8 8.5 700175620 PW2M10Ti IN M10 11 700175630 PW2T10Ti IN 11 11 700

4Z34-CTS

Description Ø M

172950 4Z34CTS M4 - M8 172960 6Z34CTS M8 - M12

35 x 6.5 mm

68 mm

Ø M

Ø 1

Ø 2

52 mm

12.5 mm

Purlin rod clip• Spring steel• With riveted fitting for threaded rods• Inside thread M8, M10 or 11 mm• Surface finish: CADDY® COAT

Rod mounted cable tray support• Spring steel• Hangs from threaded rod• With riveted fitting to support wire tray• Surface finish: CADDY® COAT




13K

Description Ø A Ø B B A+B Max. Rec. Max. Rec.(mm) (mm) (mm) (mm) Load (N) Load (N1)

170870 KX 5 - 10 4 - 8 10 - 16 170660 K8 14 - 18 4 - 6.5 2 - 10 20 - 24 220 110170670 K12 19 - 25 4 - 6.5 2 - 10 24 - 29 220 110170680 K16 25 - 32 4 - 6.5 2 - 12 30 - 37 220 110170690 K20 35 - 44 4 - 6.5 2 - 13 44 - 48 220 110

BØ B

Ø A

N1

NN

Ø B

Ø A Ø A

Rod mounted tubing support• Spring steel• Conduit/pipe hanger from flange, wire

or plain rod*• No installation tools required• Surface Finish: CADDY® COAT

*For horizontal applications only




116

13AB

Description Max. Rec.Load (N)

171120 AB 700

Ti/T


174800 M6Ti M6 7.5 700170900 M8Ti M8 8.5 700170910 M10Ti M10 11.5 700160260 T10 11 11.5 700

B-Ti/T


174940 M8TiB M8 8.5 700175030 M10TiB M10 11 700160280 T10B 11 11 700

7 mmØ 1

Ø 2

Ø 1

Ø 2

7 mm

Angle bracket• Permits wire or chain drops from concrete or wood• Surface finish: CADDY® COAT

Rod hanger• Rod hanger for wood applications• Inside thread M6, M8, M10 or 11 mm• Surface finish: CADDY® COAT

Ceiling mounted rod hanger • Permits rod drops from concrete or wood• Inside thread M8, M10 or 11 mm• Surface finish: CADDY® COAT




13

Description Ø Max. Rec.Load (N)

173440 M8MAB M8 700173450 M10MAB M10 700

MAB

MEBN

Description A(mm)

172130 8MEBN 8 172140 10MEBN 10

7 mm

Ø A

Ø

Ceiling mounted rod hanger • Permits rod drops from concrete or wood• Inside thread M8, M10 or 11 mm• Surface finish: CADDY® COAT

Rod clip• Spring steel• Used to secure objects on smooth rod• Surface finish: CADDY® COAT



118


CADDY® SPEED LINK


14

CADDY® SPEED LINK CADDY® SPEED LINK LD Tools & Accessories

Page 120 Page 121 Page 122-123

NEWNEW


CADDY® SPEED LINK


120

14CADDY® SPEED LINK

Universal wire rope fixing system• Reduces installation time and inventory• Works with a variety of CADDY® Fasteners or as

a stand-alone system without drilling into thebuilding structure

• Increases installation versatility by allowing objectsto be hung at an angle

• Allows for easy adjustments of supported objects both during and after installation

• Minimizes vibration and system wear and tearwith a strong, yet flexible wire rope

• Holds working loads of up to 900N with a 5:1 safety factor

• Meets the fire rating requirements of DIN 4102-2 for 30 minutes at 30 percent of rated load

• Finish: Electro-zinc plated (EG)

Rope Ø Rope L Max. Rec.(mm) (mm) Load (N)

195800 2 1 450195805 2 2 450195810 2 3 450195815 2 5 450195820 2 10 450


195825 3 1 900195830 3 2 900195835 3 3 900195840 3 5 900195845 3 10 900

3 mm CADDY SPEED LINK wire rope

2 mm CADDY SPEED LINK wire rope

BBB22DIN EN13501-

1:E


CADDY® SPEED LINK


14CADDY® SPEED LINK LD

Universal wire rope fixing system• Holds working loads of 200N with a 5:1

safety factor• Comes with a sleek, low-profile locking device that

minimizes visual impact• Allows for easy adjustments of supported objects

both during and after installation• Available upon special request with stainless steel

wire rope for applications where a higher level of corrosion resistance is required

• Works with a variety of CADDY® Fastenersincluding beam clamps and purlin clips (see chapter 13)

• Meets the fire rating requirements of DIN 4102-2 for 30 minutes at 30 percent of rated load

• Stainless steel versions available upon special request• Finish: Electro-zinc plated (EG)


195950 1.5 1 200195920 1.5 2 200195955 1.5 3 200195925 1.5 5 200195930 1.5 10 200

1.5 mm CADDY SPEED LINK wire rope

NEWNEW

BBB22DIN EN13501-

1:E


CADDY® SPEED LINK


122

14SLWC

Wire rope cutter• Designed for the CADDY® SPEED LINK wire rope systems• Special formed cutter prevents the unravelling of

the wire rope• Plastic moulded grips• Limited force required

195853

SLADCP

Ducting edge and surface protection• For square ducting• Plastic construction with pre-formed wire guides• Ensures good wire rope location

195851

SLADS

Fixing brackets• Universal model, to accept wire rope or hook• Secured with blind rivets or self drilling screws• Finish: Electro-zinc plated (EG)

195852

52 mm

52 mm

50 mm

14 mm

15 mm1,5 mm

20 m

m

8 m

m

4.2

mm

20 mm


CADDY® SPEED LINK


14SLESM

Eye bolts• Metric thread• Universal model, to accept wire rope or hook• Finish: Hot dip galvanised (HDG)

195859

M x L Ø A(mm) (mm)

195854 M6 x L30 7.0 20195856 M8 x L40 8.5 25

SLESH

Eye bolts• Wood thread• Universal model, to accept wire rope or hook• Finish: Hot dip galvanised (HDG)

M x L Ø A(mm) (mm)

195858 H6 x L60 8.75 32

SLWPT

Sound reduction tubing• Designed for 2 mm and 3 mm wire rope• Surface protection and insulating properties

M

A

Ø

L

H

A

Ø

L



124


SOUND INSULATION PRODUCTS


15

SBFF SGBC SBMF SBMK


SBFK

Page 128

KIT U SILENT

Page 128




126

M Ø Max. Rec.(mm) Load (N)

588440 8-8 39 1500 588430 6-6 39 1500

SBFFSound insulator female female• Max load 1500N• For tensile load• Temperature range -30°C up to +90°C• EPDM rubber insulation for sound reduction

compliant with DIN 4109• Finish: Electro-zinc plated (EG)

Ø A Ø B Max. Rec.(mm) (mm) Load (N)

588500 18.3 80 7000

SGBC

Heavy duty sound insulator• Fixing holes for M18 max.• Max load 7000N• For tensile and compressive load• EPDM rubber insulation for sound reduction


15

- 30°/+90°

- 30°/+90°

Ø

ØB

ØA

M




M1 M2 Ø Max. Rec.(mm) Load (N)

588560 8 8 39 1500588570 8 10 39 1500588580 10 10 39 1500

SBMF

Sound insulator male female• Max load 1500N• For tensile load• Temperature range -30°C up to +90°C• EPDM rubber insulation for sound reduction



588610 8-8 40 600

SBMK

Sound insulator male male• Max load 600N• For compressive load and bending• Temperature range -30°C up to +90°C• EPDM rubber insulation for sound reduction


15

- 30°/+90°

- 30°/+90°

Ø

Ø

M1

M2

M




128

15


588620 8-8 40 600

SBFK

Sound insulator female female• Max load 600N• For compressive load and bending• Temperature range -30°C up to +90°C• EPDM rubber insulation for sound reduction


Max. Rec. LLoad (N) (mm)

589980 1000 450 589990 730 600

KIT U SILENT

Universal-Fixing Kit with sound/vibrationabsorbers• Contains:

- Wall fixing profiles 300 mm, 2 No.- Cantilever arms, 2, c/w fixing screws and end caps- Sound absorbers with stud M8, 4 No.

• For wall mounting of air conditioning units• Easy height adjustment• EPDM rubber insulation for sound reduction

compliant with DIN 4109• Finish: Hot dip galvanised (HDG)

- 30°/+90°

- 30°/+90°

M

L

Ø


CADDY® PYRAMID


16

CADDY® PYRAMID 50

See the CADDY® PYRAMID website at www.erico.com/caddypyramid

CADDY® PYRAMID 25 CADDY® PYRAMID 150CADDY® PYRAMID 300CADDY® PYRAMID 600

Page 130 Page 131 Pages 132

NEWNEW NEWNEW

CADDY® PYRAMID 600

Page 132-133

NEWNEWNEWNEW


CADDY® PYRAMID


130

16

Fig. Description Max. Rec. L W H Finish No. Load (N) (mm) (mm) (mm)

182470 4 CADDY RPS50H4EG 220 264 101 101 EG182480 5 CADDY RPS50H6EG 220 264 127 152 EG182500 4 CADDY RPS50H4HD 220 264 101 101 HDG182510 5 CADDY RPS50H6HD 220 264 127 152 HDG182515* 4 CADDY RPS50H4MCP 220 264 101 101 MCP182520* 5 CADDY RPS50H6MCP 220 264 127 152 MCP

CADDY® PYRAMID 50• Dramatically reduces installation time by replacing slow,

heavy and labor-intensive methods for supporting pipes,conduits, cable tray and equipment on roofs and belowraised floors

• Protects the roof membrane while absorbing shock and vibration, but will not absorb water

• Metal cover protects against weather and other environmental conditions, such as damage caused by birds

• Easily increase load capacity by combining similar CADDY PYRAMID supports

• Polyethylene closed-cell foam and 1,5 mm steel construction• CADDY PYRAMID has been load tested to a 5-to-1 safety factor• Electro-galvanized (P1) or hot-dip galvanized (P3) finish on the rooftop version and CADDY® COAT

(P7) on the plenum version provide superior corrosion protection• Multilayer corrosion protection (P22) coating available for highly corrosive environments• Independent accelerated weather tested for outdoor performance• Finish: Electro-zinc plated (EG), Multi-layer Corrosion Protection (MCP)

Fig. 4 & 5 Electro-zinc plated

W L

H

101 mm RPS50H4127 mm RPS50H6

101 mm RPS50H4152 mm RPS50H6

68,3 mm RPS50AHSV

264 mm

NEWNEW


*Not available until mid 2008.


CADDY® PYRAMID


16

Fig. Description Max. Rec. L W HNo. Load (N) (mm) (mm) (mm)

182450 1 CADDY PPRPS25H4, Height 92 mm 110 119 144 112182460 2 CADDY PPRPS25H6, Height 143 mm 110 119 144 163

Fig. 2

Fig. 1

119 mm 144 mm

25 mm

25 mm

92 mm

20 mm

119 mm 144 mm

143 mm

20 mm

NEWNEW

W

WL

L

H

H


CADDY® PYRAMID 25• Fast click-in installation, No tools or fasteners needed• Sled design protects the roof membrane• Lightweight, all-plastic construction weighs less than 0,15 kg• Small 100 x 127 mm footprint• UV-resistant• Handles up to three 1/2” (21,3 mm) or two 3/4” (26,9 mm)

or one 1” (33,7 mm) pipes/conduit


CADDY® PYRAMID 150 CADDY® PYRAMID 300CADDY® PYRAMID 600• Innovative lightweight design Protects the roof membrane

while absorbing shock and vibration, but will not absorb water• Independently accelerated weather tested for outdoor performance• Has six M10 threaded inserts with captive nuts that allow the

product to be used with standard pipe clamps and accessories• Large footprint bases distributes load more evenly than

alternative methods• RPS 150 - polyethylene closed-cell foam and 2 mm

steel construction supports 680 N with each RPS 150 support

• RPS 300 - Crosslink polyethylene closed-cell foam and 2 mm steel construction supports up to 1350 N with each RPS 300 support

• RPS 600 - Consists of two CADDY PYRAMID 300 bases tied together with a length of strut and supports up to 2700 N with each RPS 600 support

• CADDY PYRAMID has been load tested to a 5-to-1 safety factor

• Easily increase load capacity by combining similar CADDY PYRAMID supports

• Multilayer corrosion protection (P22 or MCP) coating is available for environments where a higher degree of corrosion resistance is desired, such as areas where hot-dipped galvanized finishes are used today.

• P11 and P13 post bases (see chapter 18) are used toconstruct support structures with CADDY ERISTRUT

• Finish: Electro-zinc plated (EG), Multi-layer Corrosion Protection (MCP)

CADDY® PYRAMID


132

16

Fig. Description Max. Rec. L W H Finish With No. Load (N) (mm) (mm) (mm) Strut

182680 6 CADDY RPS150T7 666 406 305 81 EG No182690 7 CADDY RPS150T8 666 406 305 100 EG Yes182700 6 CADDY RPS300T7 1324 406 305 81 EG No182710 7 CADDY RPS300T8 1324 406 305 100 EG Yes182720 8 CADDY RPS600T8 2648 812 305 100 EG Yes

NEWNEW

Fig. Description Max. Rec. L W H Finish With No. Load (N) (mm) (mm) (mm) Strut

182580 6 CADDY RPS150T3 666 406 305 81 MCP No182590 7 CADDY RPS150T4 666 406 305 100 MCP Yes182620 6 CADDY RPS300T3 1324 406 305 81 MCP No182630 7 CADDY RPS300T4 1324 406 305 100 MCP Yes182650 8 CADDY RPS600T4 2648 812 305 100 MCP Yes



CADDY® PYRAMID


Fig. 6

Fig. 8

Fig. 7

305 mm

81 mm

820 mm

406 mm

305 mm

305 mm

81mm

100 mm

81mm

100 mm

406 mm

16

WW

W

LL

L

H

HH


Stands the test of time• Independent accelerated weather testing verifies CADDY PYRAMID’s performance

• Passed ASTM A 370-30A for mechanical pull testing between -40º C (-40º F) and +65º C (+150º F)

• Passed ASTM G154 on foam construction for accelerated UV exposure test

• Once installed, CADDY PYRAMID will not creep due to compression at rated loads

• Multilayer corrosion protection (P22) coating adds a higher level of protection for tough weather environments, with superior protection to a hot dipped galvanized finish



134


C-PROFILE SYSTEM


17

EOL C-EOL CFIX CFIX


ADK

Page 140

Page 138

ECN EOL/EO

Page 139

KP

Page 139



NEWNEW


C-PROFILE SYSTEM


136

17

500 750 1000 1250 1500 1750 2000250

N

mm

0

300

600

900

1200

1500

!�zul =160 N/mm2

fzul =l/200

ly mm4 8791lz mm4 2788Sc mm 8.336St mm 9.665A mm2 65.57

y y

z

z

CBAfff

q

B C

A

S

L

DO

E

H

EOL

C-Channel 27/18• For light applications• For individual fastening or for the efficient construction

of pipe or tube routes• Length 2 metre• Congruent hole pattern• Universally applicable for front-wall and shelf installations• A complete range of accessories for the construction

of bracketry• Finish: Pre-galvanised

L B x A x S C O D x E H(m) (mm) (mm) (mm) (mm) (mm)

599996 2 27 x 18 x 1.25 15.5 10.5 8.5 x 20 30

NEWNEW


C-PROFILE SYSTEM


17C-EOL

Cantilever arm, light duty 27/18• Same perforation as E0L channel• For wall mounted pipe runs• Universally applicable for shelf installations• Length 180 mm or 300 mm• A complete range of accessories for the construction

of bracketry• Finish: Electro-zinc plated (EG)

L B x A x S C O D x E H(mm) (mm) (mm) (mm) (mm) (mm)

599879 180 27 x 18 x 1.25 15.5 10.5 8.5 x 20 30599880 300 27 x 18 x 1.25 15.5 10.5 8.5 x 20 30

!�zul =160 N/mm2

fzul =l/200

180 200 220 240 280260 300160

N

mm

0

100

200

300

400

500

600

C

BA

qF

D

FF1 F1


y y

z

z

B C

A

L

S

DO

E

H

11x18

40 4

120

NEWNEW


C-PROFILE SYSTEM


138

17C-FIX

Channel nut with flat washer• Universal fixing for channels with openings

ranging from 13 mm to 15.5 mm• A 90º turn positions the nut into place in the channel• Finish: Electro-zinc plated (EG)

M

M

584500 6584510 8584520 10

C-FIX

Channel nut with pre-mounted stud and flat washer• Universal fixing for channels with openings

ranging from 13 mm to 15.5 mm• Pre-mounted for use with pipe clips or other

channel accessories• Easy to install• By turning the nut 90º it will snap in the right

position in the channel as seen above• Height adjustable• Finish: Electro-zinc plated (EG)

M x L

584530 M8 x 30584560 M10 x 40

M

L

NEWNEW

NEWNEW


C-PROFILE SYSTEM


17C-PROFILE SYSTEMECN EOL/EO

Channel nut• For channels EOL & EO• Threads M6, M8 or M10• Finish: Electro-zinc plated (EG)

KP

T-bolts• For channels EOL/EO/EI• Pre-mounted for use with pipe clips or other

channel accessories• Easy to install• Finish: Electro-zinc plated (EG)

M A B S(mm) (mm) (mm) (mm)

315370 EOL / EO 6 25 14 4315340 EOL / EO 8 25 14 4315350 EOL / EO 10 25 14 4

M

S

A

B

Ø A x BM x L (mm)

590076 EOL/E0/E1 8 x 30 25 x 14 590077 EOL/E0/E1 8 x 40 25 x 14 L

A

B

M

NEWNEW

NEWNEW


C-PROFILE SYSTEM


140

17ADK

End cap• Fits on to the end of C-channels and cantilever arms• Aesthetically pleasing• Reduces possible injury• Finish: Plastic, black

313301 EOL

NEWNEW




41 x 41 41 x 21 Slotted Angle KH


ECB

Page 146

ISSP

Page 146

CADDY® SLICK NUT

Page 147

STS

Page 148

UM UA UD ZTA605


ADK 421

Page 151

Profile Capping

Page 151

ZTA601

Page 151

ZT606

Page 152

18




142

18

ZZ704 INC8 ZEA110


ZEA100

Page 153

ZEA102 ZEA104 ZEA106


ZEA107

Page 154

ZEA108 ZEA109 ZWA 200


ZWA202

Page 156

ZWA209

Page 157

ZWA203 ZWA205 ZWA207





18

ZZA702 ZSA301 ZUA400 ZUA401


ZWA214

Page 159

ZWA215

Page 160

ZSA304

Page 160

ZGA501

Page 160

ZZA701 P11 P13 ROL10


ROL11

Page 162




144

18

2.5 mm Strut• 41 mm x 41 mm• For heavy applications• For individual fastening or for efficiently constructing pipe

or tube routes• Standard lengths: 3 m, 6 m• Finish: Hot dip galvanised (HDG) and Stainless steel (SS)

CADDY® ERISTRUT CHANNEL

Description L Configuration Finish (M)

ES4141PLX6 ERISTRUT, 41 X 41 X 2.5 mm 6 Plain HDGES4141SLOTX6 ERISTRUT, 41 X 41 X 2.5 mm Slotted 6 Slotted HDG

310326 ERISTRUT, AC-2 41 X 41 X 2.5 mm Slotted 6 Slotted S/SES1000 ERISTRUT, 41 X 41 X 2.5 mm 3 Plain HDGES1000T ERISTRUT, 41 X 41 X 2.5 mm Slotted 3 Slotted HDG310221 ERISTRUT, AAC 41 X 41 mm Back to Back 3 Back to Back HDG


310265 ERISTRUT, AC-2 41 X 21 X 2.5 mm Slotted 6 Slotted S/SES4121PLX6 ERISTRUT, 41 X 21 X 2.5 mm 6 Plain HDG

ES4121SLOTX6 ERISTRUT, 41 X 21 X 2.5 mm Slotted 6 Slotted HDGES3300 ERISTRUT, 41 X 21 X 2.5 mm 3 Plain HDGES3300T ERISTRUT, 41 X 21 X 2.5 mm Slotted 3 Slotted HDG

2.5 mm Strut• 41 mm x 21 mm• For medium – heavy applications• For individual fastening or for efficiently constructing pipe

or tube routes• Standard lengths: 3 m and 6 m• Finish: Hot dip galvanised (HDG) and Stainless steel (SS)


See technical section for loading dataSee chapter 20 for complete range of Stainless steel

See chapter 20 for complete range of Stainless steel See technical section for loading data




18

Slotted Angle Bracket• 2.5 mm and 4.5 mm• For light-medium applications• For efficiently constructing fire pipe or HVAC ducting routes• Standard lengths: 3 m• Finish: Electro-zinc plated (EG)

CADDY® ERISTRUT SLOTTED ANGLE

Description L Configuration Material Slot (M) Thickness (mm) Size (mm)

EA3030 30 mm x 30 mm Zinc Plated 3 Slotted 2.5 11 x 18EA5050 50 mm x 50 mm Zinc Plated 3 Slotted 4.5 14 x 30

Strut Bracket• Strut bracket for attachment to CADDY® ERISTRUT or

other structural member• Fits all standard strut depths• Finish: Hot dip galvanised (HDG)

CHANNEL BRACKET KH

A BDescription (mm) (mm)

KH10C KH Cantilever Arm, 150 mm 125 150KH5C KH Cantilever Arm, 200 mm 125 200KH6C KH Cantilever Arm, 250 mm 125 250KH11C KH Cantilever Arm, 300 mm 125 300KH15C KH Cantilever Arm, 400 mm 125 400KH12C KH Cantilever Arm, 450 mm 125 450KH16C KH Cantilever Arm, 550 mm 125 550KH13C KH Cantilever Arm, 600 mm 125 600KH8C KH Cantilever Arm, 650 mm 125 650KH9C KH Cantilever Arm, 700 mm 125 700KH14C KH Cantilever Arm, 750 mm 125 750

B

Ø 14 mm

A




146

18

Supported Strut Bracket• Strut bracket that attaches to strut• Fits all standard strut depths• Finish: Hot dip galvanised (HDG)

CHANNEL BRACKET ECB

BDescription (mm)

ECB150 Braced Cantilever Arms, 320 mm 320ECB300 Braced Cantilever Arms, 470 mm 470ECB450 Braced Cantilever Arms, 635 mm 635ECB600 Braced Cantilever Arms, 780 mm 780

ISSP

ISSP strut to threaded rod connector• Ideal for retrofitting strut to existing trapeze• Eliminates precise cutting of strut and the need for

multiple hardware pieces• Supplied with installed hex head set screw• M6, M8 and M10 all include 2 ISN nuts and is load

rated to 970N• See Chapter 19 for ISN nuts• Finish: Electro-galvanized

Description

ISSP 190800ISSP M6 190810ISSP M8 190820ISSP M10 190830

See technical section for loading data

B

Ø 14 mm

A




18CADDY® SLICK Strut Nut

Channel nut• Fast fixing method for threaded rods on to CADDY®

ERISTRUT channel• Tighten with a hex nut• CADDY SLICK is available with thread connections from

M6 up to M12• Finish: CADDY® COAT

Rod Max. Rec. Max. Rec. Max. Rec.Size Load (N) F1 Load (N) F2 Load (N) F3

174460 M6 588 735 1226174340 M8 588 735 1471174350 M10 588 735 1226174550 M12 588 735 1471

F3LOAD

F2 LOAD LOAD

F1

Features• Drastically reduce threaded rod installation time• No more tangled spring nuts• Installs with one hand utilizing plastic spring




148

18

C

BA

Strut-to-Strut Clamp• Surface Finish: Electro-zinc plated• Provides fast assembly of back-to-back half-slot strut

as an alternative to welded strut• Unique one-piece assembly eliminates the need for

washers, bolts and nuts• For new or retrofit applications• Allows joining of dissimilar half-slot channel, regardless

of profile size or finish• Easy installation with a 1/2” nut driver

CHANNEL CLAMP STS (STRUT-TO-STRUT)

Part A B C Max. Working Recommended Number (mm) (mm) (mm) Load (N) Torque

STS 25 12.7 32 4447 6.8 Nm

*1000 lbs working load per total assembly (5:1 safety factor). Not to exceed1000 lbs. Half-slot dimensions vary by manufacturer. Minimum half-slot dimensions 14 mm x 22 mm. Strut type and structure need to be evaluated to establish load for assembly. Use 1 STS per 300 mm of strut, minimum of 2required.

SW13 orsocket




18

M

H

UM• Size M6-M16• Serrated nuts to suit CADDY ERISTRUT channels• Fits on to all CADDY ERISTRUT channels• Finish: Electro-zinc plated (EG) and Hot dip galvanised (HDG)

CADDY® ERISTRUT CHANNEL NUT

M H Finish(mm) (mm) Nm

314995 6 5 12 EG315015 8 6 28 EG315025 10 8 55 EG315035 12 8 95 EG315036 16 8 125 EG315000 6 5 12 HDG315010 8 6 28 HDG315020 10 8 55 HDG315030 12 8 95 HDG315037 16 8 125 HDG

UA• Size M6-M12• Serrated nuts to suit CADDY ERISTRUT channels• Fits on to all CADDY ERISTRUT channels• Finish: Electro-zinc plated (EG) and Hot dip galvanised (HDG)


M

H


315085 6 5 12 EG315095 8 6 28 EG315105 10 8 55 EG315115 12 8 95 EG315080 6 5 12 HDG315090 8 6 28 HDG315100 10 8 55 HDG315110 12 8 95 HDG

NEED images w/ strut




150

18

M

H

UD• Size M6-M12• Serrated nuts to suit CADDY ERISTRUT channels• Finish: Electro-zinc plated (EG) and Hot dip galvanised (HDG)



315045 6 5 12 EG315055 8 6 28 EG315065 10 8 55 EG315075 12 8 95 EG315040 6 5 12 HDG315050 8 6 28 HDG315060 10 8 55 HDG315070 12 8 95 HDG

NEED images w/ strut

388080

ZTA605

Beam clamp internal• Structural attachment to beams to support

CADDY® ERISTRUT• For M12 screw• Finish: Hot dip galvanised (HDG)




18

313310

DLP

Profile capping, white plastic• Finish: Polyvinychloride

ADK 421

Profile end caps blue• Material: Polyethylene (PE)

313305 41 x 4141 x 21

ZTA601

Beam clamp• Structural attachment to beams to support

CADDY® ERISTRUT• To attach strut to structural I-Beams• Finish: Hot dip galvanised (HDG)

387700 41 mm x 21 mm back to back41 mm x 21 mm41 mm x 41 mm




152

18

313870 41 x 41

A Max. Rec.(mm) Load (N)

336290 13 450

ZZ704

Window bracket• Structural attachment to beams to support

CADDY® ERISTRUT• Finish: Hot dip galvanised (HDG)

INC8

Spring steel fastener• Beam clamp set that allows strut channel to be

fixed between 2 flanges of an H hot rolled beam• Finish: CADDY® COAT

ZT606

Profile end bracket• Fasten CADDY® ERISTRUT to beam• Finish: Hot dip galvanised (HDG)

313270




18ZEA110

Wide tee plate• To create metal frames with CADDY® ERISTRUT channels

and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)

387450

ZEA100

Square washer• To create metal frames with CADDY® ERISTRUT channels


387500

ZEA102

2 hole flat plate• To create metal frames with CADDY® ERISTRUT channels


387520




154

18

387540

ZEA104

4 hole flat plate• End to end channel connections to create metal frames

with CADDY® ERISTRUT channels and CADDY ERISTRUThardware

• For M12 hardware• Finish: Hot dip galvanised (HDG)

387560

ZEA106

3 hole adjustable flat plate• Angle channel plate to create metal frames with

CADDY® ERISTRUT channels and CADDY ERISTRUT hardware


387570

ZEA107

Right angle bracket• 90º angle bracket to create metal frames with






18ZEA108

Tee bracket• Tee bracket to create metal frames with



387580

ZEA109

Cross plate• Intersection cross plate to create metal frames with



387590




156

18

ZWA202

Angle bracket 3 holes• Angle bracket to create metal frames with CADDY®

ERISTRUT channels and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised (HDG)

387620

Angle bracket 2 holes• To create metal frames with CADDY® ERISTRUT channels

and CADDY ERISTRUT hardware• For M12 hardware• Finish: Hot dip galvanised

ZWA 200

313330 +387600 -

387630

ZWA203






18

387650

ZWA205



387670

ZWA207



ZWA209

Wide tee angle bracket 4 holes• Angle bracket to create metal frames with CADDY®


387690




158

18ZZA702

Transversal support bracket• To create metal frames with CADDY® ERISTRUT channels


387720

387740

ZSA301

Single cross over bracket 41 mm x 41 mm• To create metal frames with CADDY® ERISTRUT channels





18

387760

ZUA401

Offset tee bracket 41 mm x 21 mm• To create metal frames with CADDY® ERISTRUT channels


ZWA214

Offset angle bracket left• To create metal frames with CADDY® ERISTRUT channels


387890 56 90

387750

ZUA400

Offset tee bracket 41 mm x 41 mm• To create metal frames with CADDY® ERISTRUT channels





160

18

388270

ZGA501

Single base plate• To create metal frames with CADDY® ERISTRUT channels


388110

ZSA304

Corner angle bracket• To create metal frames with CADDY® ERISTRUT channels


ZWA215

Offset angle bracket right• To create metal frames with CADDY® ERISTRUT channels


387900




18

A

B

20 mm

C

Post Base for Channel• Post base to create metal frames for attachment

to CADDY® ERISTRUT and/or CADDY® PYRAMID, see Chapter 16

• Finish: Hot dip galvanised (HDG)

STRUT POST BASE P11

A B C(mm) (mm) (mm)

P110000HD 150 150 89

FITTING SPECIFICATIONS (unless noted otherwise):

Hole sizes 14 mm, Spacing 20 mm from edge and 47 mm on center

Width 41 mm, Thickness 6 mm, Standard Finish: HDG

Fits on CADDY® PYRAMID 150 and 300 models

388400

ZZA701

Transveral corner bracket• To create metal frames with CADDY® ERISTRUT channels





162

18

14 mm

Single Trolley• Wheels: 35 mm diameter• Finish: Electro-zinc

plated (EG)

STRUT TROLLEY ROL10

ROL10000EG



Width 41 mm, Thickness 6 mm, Standard Finish: EG

Double Trolley• Wheels: 35 mm diameter• Finish: Electro-zinc

plated (EG)

STRUT TROLLEY ROL11

ROL11000EG



Width 41 mm, Thickness 6 mm, Standard Finish: HDG

A

B

20 mm

C

Post Base for Welded Channel• Post base to create metal frames for attachement

to CADDY® ERISTRUT and/or CADDY PYRAMID, see Chapter 16

• Finish: Hot dip galvanised (HDG)

STRUT POST BASE P13

A B C(mm) (mm) (mm)

P130000HD 150 150 89

14 mm

14 mm

20 mm

C

B

A




19

ISN IHT VDF TMN


LA

Page 166

ANG

Page 167

HSCR

Page 167

CMP

Page 168

Rod Coupling D1 D2 D3


E2

Page 170

Rod Connectors

Page 170

ERIC

Page 171

Strike Anchor

Page 171




164

19

Ferrules NUT Threaded Rod Isolation Rubber


Hex Head Set Screws

Page 175

Square Washer

Page 175

Suredrive Anchor

Page 176

VMP

Page 176

Hardware Washers Hardware Washers ESGP MSP


Barrnog/TSGBHD

Page 178

TSGB TPC

Page 179 Page 179




19ISN

Fast installation nut• Allows for side mounting on rod• Time saving• Finish: Electro-zinc plated (EG)

IHT

Sound reduction lining• Silicon• For pipe clamps with steel profile 20 mm to 25 mm• For temperatures up to 200º C

Description Ø Max. Rec.(mm) Load (N)

ISNM6 187340 M6 750ISNM8 187350 M8 1000ISNM10 187360 M10 1000

B(mm)

578680 20578690 25

+200°BBB22DIN EN13501-

1:E




166

19VDF

Dual sided screw with collar• Size M10• Finish: Electro-zinc plated (EG)

LA

Drop in anchor• With internal thread• Finish: Electro-zinc plated (EG)

TMN

M x L(mm)

583860 10 x 45

M x L(mm)

590080 8 x 30590090 10 x 40

L

M

M

CADDY® ERISTRUT - Hammer head bolt• Pre-mounted with nut and large washer• With stud M8, M10, M12• Channel nuts are serrated• Fits onto all CADDY ERISTRUT channels• Finish: Electro-zinc plated (EG)

M kg/1

589890 M6 0.01574410 M8 0.01574420 M10 0.02574430 M12 0.05589895 M16 0.06589900 M20 0.08




19Angle bracket ANG

• Finish: Hot dip galvanised (HDG)• Variable sized pre-punched bolt holes

A OD1 OD2(mm) (mm) (mm)

AB77 25 7 7AB97 25 9 7AB711 25 11 7AB1111 25 11 11

37 mm

37 mm

OD1

OD2

3 mm20 mm

Steel Hex Cap Bolts• Size Range: M6, M8, & M10 sizes• Finish: Hot dip galvanised (HDG)

Hex bolt HSCR

M6, M8 or M10 Thread

A

Thread ASize (mm)

BOL-M625-HDG M6 25BOL-M820-HDG M8 20BOL-M825-HDG M8 25BOL-M830-HDG M8 30BOL-M840-HDG M8 40BOL-M1020-HDG M10 20BOL-M1030-HDG M10 30BOL-M1040-HDG M10 40




168

19

M Max. Rec.(mm) Load (N)

CMP8 M8 2500CMP10 M10 3000CMP12 M12 4000

CMP

CADDY® mounting plate• CADDY mounting plate M8 through M12• Used in conjunction with threaded rod• Finish: Electro-zinc plated (EG)

Coupling• Size Range: M8 to M20 rod sizes• Finish: Electro-zinc plated (EG)

Rod Coupling

RS

COU-M8-ZP M8COU-M10-ZP M10COU-M12-ZP M12COU-M16-ZP M16COU-M20-ZP M20

RS

M

25 mm

100 mm

3 mm





19D1


336280 D1 ≤ 4 11 600

D2


339100 D2 ≤ 4 11 600

D3


339110 D3 ≤ 4 11 600

15º

97 mm

32 mm

≤ 22 mm

max. M10

Ø

A

≤ 22 mm

max. M10

A

15º

≤ 22 mm

max. M10A

Purlin clip• for purlins• M10• Surface finish: Electro-zinc plated






170

19

H W T M Max. Rec.(mm) (mm) (mm) (mm) Load (N)

E28 52 25 3 M8 600E210 52 25 3 M10 600E212 52 25 3 M12 600

E2 for purlin application• Size Range: M8, M10 and M12 sizes• No mounting screws required • Compatible with most purlin profiles• A load rating is only applicable if the load-bearing capacity of

the supporting element (purlin) is adequate.• Finish: Electro-zinc plated (EG)

E2 Purlin Clip

W x T HS RS Height(mm) (mm) Adjustment

ERC1010 – – M10 NoERC02510 20.3 x 3.9 13.6 – –

• For connecting threaded rod to pipe hangers• Size Range: M10 to M12 rod• Finish: Electro-zinc plated (EG)

ERC1010

Rod Connectors

M

T

H

T

W

HS

W

ERC02510




W T H ODB ODT Max. Rec.(mm) (mm) (mm) (mm) (mm) Load (N)

ERIC 8 25 3 100 10 10 N/AERIC 10 25 5 113 12 10 1350ERIC 12 40 6 118 14 14 2650ERIC 16 50 6 122.5 18 14 4400

Two piece clamp extension• Clevis hanger sizes M8 through M16• Fasten from horizontal to vertical hanging configurations• Use in conjunction with all channel profiles• Finish: Hot dip galvanised (HDG)

Clevis - ERIC for horizontal extension

19

Strike Anchor

• For direct installation of pipe hangers to concrete• M8 & M10 thread • Finish: Electro-zinc plated (EG)

RS Thread Drill HoleLength Diameter (mm)

ESA0850 M8 25 10ESA1050 M10 25 10.5

H

T

ODT

ODB

W




172

19

• Width 40 mm• Other sizes available upon request

Plywood Timber Ferrules

Nominal Ferrule Wall Ferrule OutsidePipe Size Thickness (mm) Dia (mm)

(CU)

FER-015-12-PLY 15 12 35FER-015-25-PLY 15 25 64FER-015-38-PLY 15 38 89FER-015-50-PLY 15 50 114FER-020-12-PLY 20 12 45FER-020-25-PLY 20 25 70FER-020-38-PLY 20 38 95FER-020-50-PLY 20 50 120FER-025-12-PLY 25 12 51FER-025-25-PLY 25 25 75FER-025-38-PLY 25 38 102FER-025-50-PLY 25 50 127FER-032-12-PLY 32 12 56FER-032-25-PLY 32 25 83FER-032-38-PLY 32 38 102FER-032-50-PLY 32 50 140FER-040-12-PLY 40 12 64FER-040-25-PLY 40 25 89FER-040-38-PLY 40 38 114FER-040-50-PLY 40 50 140FER-050-12-PLY 50 12 76FER-050-25-PLY 50 25 102FER-050-38-PLY 50 38 127FER-050-50-PLY 50 50 152FER-065-12-PLY 65 12 89FER-065-25-PLY 65 25 114FER-065-38-PLY 65 38 140FER-065-50-PLY 65 50 165FER-080-12-PLY 80 12 102FER-080-25-PLY 80 25 127FER-080-38-PLY 80 38 152FER-080-50-PLY 80 50 178FER-100-25-PLY 100 25 152FER-100-38-PLY 100 38 178FER-100-50-PLY 100 50 203FER-125-25-PLY 125 25 178FER-125-50-PLY 125 50 228FER-150-25-PLY 150 25 203FER-150-38-PLY 150 38 228FER-150-50-PLY 150 50 254FER-200-25-PLY 200 25 254FER-200-38-PLY 200 38 280FER-200-50-PLY 200 50 305




19NUT

Steel hex nut• Size range: M6 to M20• Finish: Electro-zinc plated (EG), Hot dip galvanised (HDG)

& Stainless steel

Size SurfaceFinish

HEX-M6-ZP M6 EGHEX-M8-ZP M8 EGHEX-M10-ZP M10 EGHEX-M12-ZP M12 EGHEX-M16-ZP M16 EGHEX-M20-ZP M20 EGHEX-M6-HDG M6 HDGHEX-M8-HDG M8 HDGHEX-M10-HDG M10 HDGHEX-M12-HDG M12 HDGHEX-M16-HDG M16 HDGHEX-M20-HDG M20 HDG

HEX-M6-SS M6 316 Stainless steelHEX-M8-SS M8 316 Stainless steelHEX-M10-SS M10 316 Stainless steelHEX-M12-SS M12 316 Stainless steelHEX-M16-SS M16 316 Stainless steelHEX-M20-SS M20 316 Stainless steel




174

19

• Size range: M6 to M20• Attaches hangers to structural attachments• Low carbon steel, also available in Stainless steel (SS) - see

stainless steel section• Finish: Electro-zinc plated (EG) and Hot dip galvanised (HDG)

Threaded Rod

• For the isolation of dissimilar materials, inhibits galvanic corrosion

• Dampens sound and vibration

Isolation Rubber

RS

L

RS L Surface(mm) Finish

ROD-M6X3-HDG M6 3 HDGROD-M6X3-ZP M6 3 EG






For TypeIsolation of

RUB-FLAT Pipe Clamps 1RUB-LIP Strut/Channel 2

Type 1

Type 2




19

• Size Range: M6, M8 & M10• Finish: Electro-zinc plated (EG) and 316 Stainless steel (SS)

Hex Head Set Screws

• Rod size: M10, M12 and M16• Washer size: 38 mm x 38 mm x 3 mm• Finish: Electro-zinc plated (EG)

Square Washer

Thread A SurfaceSize (mm) Finish

SET-M625-SS M6 25 SSSET-M820-SS M8 20 SSSET-M825-SS M8 25 SSSET-M830-SS M8 30 SSSET-M840-SS M8 40 SSSET-M1020-SS M10 20 SSSET-M1030-SS M10 30 SSSET-M1040-SS M10 40 SSSET-M625-ZP M6 25 EGSET-M820-ZP M8 20 EGSET-M825-ZP M8 25 EGSET-M830-ZP M8 30 EGSET-M840-ZP M8 40 EGSET-M1020-ZP M10 20 EGSET-M1030-ZP M10 30 EGSET-M1040-ZP M10 40 EG


A

RS

SQ-38M10-ZP M10SQ-38M12-ZP M12SQ-38M16-ZP M16




176

19

• For the installation of pipe saddles• Finish: Electro-zinc plated (EG)

Suredrive Anchor

Dia.(mm)

SUR-M6 6

• CADDY vertical mounting plate M8 through M12• Horizontal pipe support application fastened to building structure• Used in conjunction with threaded rod• Finish: Electro-zinc plated (EG)

Vertical Mounting Plate - VMP

RS Max. Rec.(mm) Load (N)

VMP8 M8 2500VMP10 M10 3000VMP12 M12 4000

L

ØA


M

T

H

W




19

Round Steel Flat Washer• Size Range: M6 thru M20• Finish: Electro-zinc plated (EG)

HARDWARE WASHER

ID OD(mm) (mm)

WAS-M6-ZP 6 16WAS-M8-ZP 8 19WAS-M10-ZP 10 23WAS-M12-ZP 12 28WAS-M16-ZP 16 33WAS-M20-ZP 20 38

IDOD

NOTE: Snap one grommet into standard 34.1 mm field punchedhole, or snap two together into any shape factory punched hole;anti-rattle tabs in ESGP allow grommet to accommodate coppertubing from 15 mm to 25 mm

Easy Snap/Anti Rattle Pipe Grommet• Size Range: 15 mm thru 25 mm copper tubing• Yellow plastic pipe grommet provides 360º protection of

plumbing and fire sprinkler plumbing in metal studs

HARDWARE GROMMET ESGP

Size(mm)

ESGP 15-25




178

19

Metal Stud Punch• Used in the field for punching standard sized 34.1 mm

holes in metal studs• Cushioned handles mean less operator fatigue and more

comfortable handling• Tool design with offset handles allows punch to work in

confined locations and near perpendicular walls• Lightweight punch makes accurate location of holes easier• Hardened steel components keep tool sharp longer –

less replacement• Plastic grommets (ESGP) snap easily into 34.1 mm hole

HARDWARE TOOLS MSP

MSP20

Barrnog/TSGBHD adjustable metal nogging

Timber or steel nogging frame construction• Barrnog adjustable nogging up to 600 mm• Suitable for timber and steel construction• Pre-assembled metal nogging, fast, convenient

and strong construction• Finish: Electro-zinc plated (EG)

L W T(mm) (mm) (mm)

Barrnog 330-600 92 1

W

L

T




19

Nylon pipe clamp• Nylon pipe clamp to be used together with TSGB bracket• Pipe diameter 9 mm to 61 mm• Use self tapping screws to fix on metal stud• IPC are supplied with self-tapping screw

TPC 112 • TPC 238

D D(in) (mm)

187192 3/8 - 1-1/8 9-28187193 5/8 - 2-3/8 16-61

D

Support to enable the fixing of pipes in hollow walls• The bracket can be extended in length between

280 mm up to 660 mm• Fix the bracket between 2 vertical stands of the

hollow wall system• The perforations in the bracket allow quick fixings against the

vertical beams of the walls and allow also the plastic pipeclamps to be mounted on the horizontal channel

• Use SMS8 self-tapping screw to fix on stud• Finish: Electro-zinc plated (EG)

TSGB 16 • TSGB 24

LL L(in) (mm)

187190 11-18 280-458187191 17-26 432-660



180


SSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELLSSTTAAIINNLLEESSSS SSTTEEEELL



20

CADDY® ERISTRUT CADDY® ERISTRUT

Page 183 Page 183

CHC

Page 185-186

SPC

Page 187

CADDY® MACROFIX

Page 190

UD

Pages 184

UM

Page 184

WB

Page 188

CADDY® MACROFIX NI

Page 189

105

Page 191

406

Page 192

H-2

Page 193

H-CTB-2

Page 193

M-MSM-2 EM-2

Page 194Page 194

EM-M-2

Page 195





182

20

Threaded Rod Hex Head Set Screws

Page 195 Page 195

HSCR

Pages 196

NUT

Page 196





20

2.5 mm Strut• 41 mm x 41 mm• For heavy applications• For individual fastening or for efficiently constructing pipe

or tube routes• Standard lengths: 3 m, 6 m• Finish: Stainless steel (SS)

See technical section for loading data.

See technical section for loading data.



310326 ERISTRUT, AC-2 41 X 41 X 2.5 mm Slotted 6 Slotted S/S


310265 ERISTRUT, AC-2 41 X 21 X 2.5 mm Slotted 6 Slotted S/S

2.5 mm Strut• 41 mm x 21 mm• For medium – heavy applications• For individual fastening or for efficiently constructing pipe

or tube routes• Standard lengths: 3 m and 6 m• Finish: Stainless steel (SS)






184

20

M H(mm) (mm) (Nm)

315180 6 5 12315190 8 6 28315120 10 8 55315200 12 8 95

CADDY® ERISTRUT channel nut with spring• M6 - M12• Suitable for al CADDY ERISTRUT channels• Finish: 316 Stainless steel (SS)

UD

CADDY® ERISTRUT channel nut• M6 - M12• Suitable for all CADDY ERISTRUT channels• Finish: 316 Stainless steel (SS)

UM

M

H

M H(mm) (mm) (Nm)

315140 6 5 12315150 8 6 28315160 10 8 55315170 12 8 95

M

H





20

Fasten copper and stainless steel pipe services tostrut channel profiles• Channel clip sizes 20 mm through 200 mm• Suits all profile strut channels and cantilever brackets• Finish: 316 Stainless steel (SS)

Channel Clip Stainless Steel - CHC for Copper Pipe and Stainless Steel

Pipe Actual Pipe W x T BoltSize (mm) OD (mm) (mm)

CHC-015-CU-SS 15 13 32 x 1.5 M6CHC-020-CU-SS 20 19 32 x 1.5 M6CHC-025-CU-SS 25 25 32 x 1.5 M6CHC-032-CU-SS 32 32 32 x 2.0 M6CHC-040-CU-SS 40 38 32 x 2.0 M6CHC-050-CU-SS 50 51 32 x 2.5 M8CHC-065-CU-SS 65 64 32 x 2.5 M8CHC-080-CU-SS 80 76 32 x 2.5 M8CHC-100-CU-SS 100 102 32 x 2.5 M10CHC-125-CU-SS 125 127 32 x 2.5 M10CHC-150-CU-SS 150 152 25 x 3.0 M10CHC-200-CU-SS 200 203 25 x 3.0 M10

WT





186

20

Fasten PVC pipe services to strut channel profiles• Channel clip sizes 40 mm through 225 mm• Suits all profile strut channels and cantilever brackets • Finish: 316 Stainless steel (SS)

Channel Clip Stainless Steel - CHC for PVC Pipe

Pipe Actual Pipe W x T BoltSize (mm) OD (mm) (mm)

CHC-040-PVC-SS 40 43 32 x 2.0 M8CHC-050-PVC-SS 50 55 32 x 2.5 M8CHC-065-PVC-SS 65 69 32 x 2.5 M8CHC-080-PVC-SS 80 82 32 x 2.5 M8CHC-090-PVC-SS 90 90 32 x 2.5 M10CHC-100-PVC-SS 100 110 32 x 2.5 M10CHC-150-PVC-SS 150 160 32 x 3.0 M10CHC-225-PVC-SS 225 251 32 x 3.0 M10

WT





20

Support copper and stainless steel pipe services withwall bracket, hanging strap or ERIC 1010• Single piece clip for sizes 15 mm through 125 mm• One piece clip for fast convenient installation• Interchangeable product• Finish: 316 Stainless steel (SS)

Single Piece Clip Stainless Steel - SPC forCopper Pipe

Pipe Actual Pipe W x T L SSize (mm) OD (mm) (mm) (mm) (mm)

SPC-015-CU-SS 15 13 25 x 1.0 25 7 x 7SPC-020-CU-SS 20 19 25 x 1.0 25 7 x 7SPC-025-CU-SS 25 25 25 x 1.2 25 7 x 7SPC-032-CU-SS 32 32 25 x 1.2 25 7 x 7SPC-040-CU-SS 40 38 25 x 1.2 25 7 x 7SPC-050-CU-SS 50 51 25 x 1.4 25 7 x 7SPC-065-CU-SS 65 64 25 x 1.5 25 7 x 7SPC-100-CU-SS 100 102 25 x 1.5 25 7 x 7SPC-125-CU-SS 125 127 25 x 1.7 25 7 x 7

T

L

W

SS





188

20

Attach to wall/ceiling with hanging strap, singlepiece clip of bracket clip• Wall bracket for all sizes of HST, SPC & BRC products• 20 mm adjustment• Finish: 316 Stainless steel (SS)

Wall Bracket Stainless Steel - WB

W x T L A FH R Screw(mm) (mm) (mm) (mm) (mm) Type

WB-SS CUP 25 x 1.5 85 65 6.5 20 cup headWB-SS SET 25 x 1.5 85 65 6.5 20 set screw

T

W

A

FH

L

R





20

2 Screw pipe clamp with boss M8 or M10• M6 multifunction screw with hexagonal combination head

(slot & crosshead), c/w retaining washer• Steel profile (B x S)• For pipe diameter from 14 mm to 168 mm• Finish: 316 Stainless steel (SS)

CADDY® MACROFIX

Ø d B x S RS Max. Rec.(in) (mm) (mm) Load (N)

595400 3/8 14-18 20 x 1.5 M8 1000595410 1/2 20-26 20 x 1.5 M8 1000595420 3/4 23-30 20 x 1.5 M8 1000595430 1 33-40 20 x 1.5 M8 1000595440 1-1/4 41-47 20 x 1.5 M8 1000595450 1-1/2 48-54 20 x 1.5 M8 1000595470 2 56-62 20 x 1.5 M8 1300595475 62-69 20 x 1.5 M8 1300595480 67-71 20 x 1.5 M8 1300595490 2-1/2 69-78 25 x 2.0 M8 1300595500 3 85-91 25 x 2.0 M8 1300595505 90-98 25 x 2.0 M10 1300595510 97-107 25 x 2.0 M10 1300 595520 104-110 25 x2.0 M10 1300595530 4 108-116 25 x 2.0 M10 1300595535 116-126 25 x 2.5 M10 1300595540 129-140 25 x 2.5 M10 2200595550 5 133-141 25 x 2.5 M10 2200595555 144-154 25 x 2.5 M10 2200595560 6 159-168 25 x 2.5 M10 2200

d





190

20

2 Screw pipe clamp with boss M8 or M10• EPDM rubber insulation for sound reduction compliant with

DIN 4109• M6 multifunction screw with hexagonal combination head

(slot & crosshead), c/w retaining washer• Steel profile (B x S)• For pipe diameter from 12 mm to 220 mm• Temperature rating from -50ºC up to +110ºC• Fire rating DIN EN 13501-1:E• Finish: 316 Stainless steel (SS)

CADDY® MACROFIX

Ø d B x S RS Max. Rec.(in) (mm) (mm) Load (N)

595595 1/4 12-15 20 x 1.5 M8 1000595600 3/8 15-19 20 x 1.5 M8 1000595610 1/2 20-24 20 x 1.5 M8 1000595620 3/4 25-30 20 x 1.5 M8 1000595630 1 32-37 20 x 1.5 M8 1000595640 1-1/4 40-45 20 x 1.5 M8 1000595650 1-1/2 48-53 20 x 1.5 M8 1300595660 54-58 20 x 1.5 M8 1300595670 2 59-63 20 x 1.5 M8 1300595675 62-64 25 x 2.0 M8 1300595680 68-73 25 x 2.0 M8 1300595690 2-1/2 75-80 25 x 2.0 M8 1300595695 82-86 25 x 2.0 M8 1300595700 3 89-91 25 x 2.0 M10 1300595710 95-103 25 x 2.0 M10 1300595720 4 108-116 25 x 2.5 M10 2200595730 121-127 25 x 2.5 M10 2200595740 129-135 25 x 2.5 M10 2200595750 5 135-141 25 x 2.5 M10 2200595755 159-162 25 x 2.5 M10 2200595760 6 165-168 25 x 2.5 M10 2200595770 198-202 30 x 3.0 M10 2500595775 210-215 30 x 3.0 M10 2500595780 8 216-220 30 x 3.0 M10 2500

d

- 50°/+110°BBB22DIN EN13501-

1:E





20

Nominal Steel Pipe OD A B Max. Rec.Pipe Size (nb) (mm) (mm) (mm) Load (N)

1050050S4 15 21 12 56 27151050075S4 20 27 12 78 27151050100S4 25 34 12 84 27151050125S4 32 43 12 92 27151050150S4 40 48 12 102 27151050200S4 50 60 12 111 27151050250S4 65 76 14 124 43201050300S4 80 89 14 138 43201050400S4 100 114 17 152 55651050500S4 125 140 17 165 55651050600S4 150 165 17 219 71201050800S4 200 219 21 270 8010

304 Stainless Steel Band Hanger• Size Range: 15nb to 200nb • Recommended for the suspension of stationary stainless

steel pipe lines

SWIVEL LOOP HANGER 105

B

A

NOTE: Stainless steel hex nuts recommended for use with hanger(not included)





192

20

Nominal Pipe Pipe OD RS A B Max. Rec.Size (nb) (mm) (mm) (mm) Load (lbs.)

4060050S4 15nb 21 M10 54 41 27154060075S4 20nb 27 M10 60 44 27154060100S4 25nb 34 M10 70 52 27154060125S4 32nb 43 M10 84 60 27154060150S4 40nb 48 M10 100 75 27154060200S4 50nb 60 M10 114 83 27154060250S4 65nb 76 M12 133 95 50254060300S4 80nb 89 M12 152 105 50254060400S4 100nb 114 M16 197 137 63654060500S4 125nb 140 M16 248 173 86304060600S4 150nb 165 M20 298 210 89004060800S4 200nb 219 M20 356 241 160204061000S4 250nb 273 M20 419 276 169004061200S4 300nb 324 M20 473 305 186804061600S4 400nb 406 M24 610 400 204604061800S4 450nb 457 M28 679 445 213504062000S4 500nb 508 M32 762 498 213504062400S4 600nb 610 M32 867 552 21350

Standard Duty 304 Stainless Steel• Size Range: 15nb to 600nb • Recommended for the suspension of stationary non-insulated

stainless steel pipe lines

CLEVIS HANGER 406

RS

BA





20


179610 4H24-2 3 - 8 650179620 4H58-2 8 - 14 650179630 4H912-2 14 - 20 650

H-2

Ø 6.8 mm

A

Stainless steel hammer on beam clamp• For fixing wire or chain• Material: Stainless steel AISI 304, V2A

H-CTB-2


170280 4H24CTBR-2 3-8 25 - 51 300170300 4H58CTBR-2 8- 14 25 - 51 300170310 4H912CTBR-2 14 - 20 25 - 51 300

A

B

Stainless steel hammer-on beam clamp with strap• Comes equipped with cable tie to support pipe tubing• Material: Stainless steel AISI 304, V2A





194

20M-MSM-2


179650 8M24SM-2 3 - 8 18 - 22 90179660 8M58SM-2 8 - 14 18 - 22 90179670 8M912SM-2 14 - 20 18 - 22 90179690 12M24SM-2 3 - 8 22 - 30 90179700 12M58SM-2 8 - 14 22 - 30 90179710 12M912SM-2 14 - 20 22 - 30 90

A

Ø

Stainless steel hammer-on finger close pipe clamp• With pipe clamp with closing mechanism• Material: Stainless steel AISI 304, V2A


179720 EM24-2 3 - 8 200179730 EM58-2 8 - 14 200179740 EM912-2 14 - 20 200

EM-2

9 x 2 mmM6

M6

Stainless steel hammer-on clip • Horizontal and vertical inside thread M6• Material: Stainless steel AISI 304, V2A





20EM-M-2


179780 8EM24-2 3 - 8 18 - 22 200179790 8EM58-2 8 - 14 18 - 22 200179800 8EM912-2 14 - 20 18 - 22 200179810 12EM24-2 3 - 8 22 - 30 200179820 12EM58-2 8 - 14 22 - 30 200179830 12EM912-2 14 - 20 22 - 30 200

A

Ø

Stainless steel hammer-on finger close pipe clamp• With pipe clamp with closing mechanism• Material: Stainless steel AISI 304, V2A

• Size range: M6 to M20• Attaches hangers to structural attachments• Finish: Stainless steel (SS)

Threaded Rod

RS

L

RS L(mm)

ROD-M6X3-SS M6 3ROD-M8X3-SS M8 3ROD-M10X3-SS M10 3ROD-M12X3-SS M12 3ROD-M16X3-SS M16 3ROD-M20X3-SS M20 3

• Size Range: M6, M8 & M10• Finish: 316 Stainless steel (SS)

Hex Head Set Screws

Thread A SurfaceSize (mm) Finish

SET-M625-SS M6 25 SSSET-M820-SS M8 20 SSSET-M825-SS M8 25 SSSET-M830-SS M8 30 SSSET-M840-SS M8 40 SSSET-M1020-SS M10 20 SSSET-M1030-SS M10 30 SSSET-M1040-SS M10 40 SS M6, M8 or M10 Thread

A




196

STAINLESS STEEL RANGE 20

Steel Hex Cap Bolts• Size Range: M6, M8, & M10 sizes• Finish: Stainless steel (SS)

Hex bolt HSCR


A

Thread ASize (mm)

BOL-M625-SS M6 25BOL-M820-SS M8 20BOL-M825-SS M8 25BOL-M830-SS M8 30BOL-M840-SS M8 40BOL-M1020-SS M10 20BOL-M1030-SS M10 30BOL-M1040-SS M10 40

NUT

Steel hex nut• Size range: M6 to M20• Finish: Stainless steel (SS)

Size SurfaceFinish

HEX-M6-SS M6 316 Stainless steelHEX-M8-SS M8 316 Stainless steelHEX-M10-SS M10 316 Stainless steelHEX-M12-SS M12 316 Stainless steelHEX-M16-SS M16 316 Stainless steelHEX-M20-SS M20 316 Stainless steel


GUIDES & ROLLERS


21

ROL12 ROL13 ROL14 ROL15


610

Page 202

615

Page 203

PESMO

Page 204

PESHO

Page 205

PESMOS

Page 206

PESHOS

Page 207

PESHTS

Page 211

PESMT

Page 208

PESHT

Page 209

PESMTS

Page 210


GUIDES & ROLLERS


198

21Strut Pipe Roller ROL12

• Size Range: 25nb to 100nb pipe• Pipe rollers mount to strut for applications where

there is longitudinal pipe movement• Hole Sizes: 14 mm, Spacing 17 mm from edge and

48 mm on center• Width: 41 mm• Thickness: 6 mm• Finish: Electro-zinc plated (EG)

Strut Pipe Roller ROL13

• Size Range: 100nb to 200nb pipe• Pipe rollers mount to strut for applications

where there is longitudinal pipe movement• Hole Sizes: 14 mm, Spacing 17 mm from edge and


A

B

See chart on page 199

See chart on page 199

A

B

ROL12000EG

PipeSize

ROL13034EG 100nbROL13046EG 150nbROL13068EG 200nb


GUIDES & ROLLERS


Pipe Saddle Actual Actual Actual A B Size Number Covering O.D. Radius

Thickness

None 0 17 13 165 75630 22 83 41 165 105631 37 111 56 210 113632 48 129 64 210 122

None 0 24 17 165 79630 18 92 46 184 108631 40 117 59 210 116632 54 146 73 210 130

None 0 43 21 165 84630 22 98 49 184 110631 41 130 65 210 122632 49 152 76 210 133633 62 175 87 235 143

None 0 48 24 165 86630 25 108 54 210 111631 38 133 67 210 124632 59 175 87 235 141633 71 197 98 235 152

None 0 60 30 165 94630 27 121 60 210 117631 40 146 73 210 130632 54 181 90 235 144633 67 206 103 257 154634 79 232 116 257 168

None 0 73 37 165 100630 27 137 68 210 125631 37 156 78 235 133632 59 200 100 235 156633 73 229 114 235 171634 86 254 127 235 184

None 0 89 44 184 105630 25 149 75 210 133631 40 178 89 235 143632 52 203 102 257 154633 65 229 114 257 168634 78 254 127 276 178

None 0 114 57 210 114630 27 181 90 235 144631 40 206 103 257 154632 52 232 116 257 168633 65 254 127 257 179634 78 286 143 276 194635 103 330 165 276 217

None 0 143 71 210 129630 25 210 105 257 156631 38 238 119 257 170632 51 264 132 276 178633 65 286 143 276 194634 78 314 157 276 206635 106 362 181 276 233

None 0 168 84 235 138630 25 229 114 257 167631 38 257 129 276 178632 51 279 140 276 191633 64 314 157 276 208634 76 343 171 276 219635 105 384 192 276 246

None 0 219 110 257 162631 38 305 152 276 203632 51 330 165 276 217633 68 368 184 276 237634 79 391 195 276 249635 105 441 221 276 276

ROL12 & ROL13 Sizing Chart

20

25

32

40

50

65

100

80

125

150

200

21


GUIDES & ROLLERS


200






ThicknessNone 0 168 84 243 175630 25 229 105 259 200631 38 254 127 270 213632 51 279 140 279 225633 64 305 152 289 238634 76 330 165 298 251635 105 387 194 318 278

None 0 219 110 260 198631 38 305 152 289 238632 51 330 165 298 251633 68 365 183 310 265634 79 387 194 318 278635 105 438 219 337 302

None 0 273 137 279 224631 38 362 181 308 265632 52 387 194 318 278633 65 413 206 325 289634 78 438 219 333 302635 103 489 248 352 325

None 0 324 162 297 248631 40 410 205 327 289632 52 438 219 337 302633 67 464 232 344 313634 78 489 244 352 325635 105 543 271 371 349

None 0 356 178 306 262631 38 445 222 335 302632 51 467 233 344 313633 64 492 246 352 325634 76 518 259 362 337635 102 568 284 378 362

None 0 406 203 324 287631 38 498 249 352 325632 51 518 259 376 337633 64 549 275 368 349634 76 562 281 378 362635 102 619 310 394 384

ROL14 Sizing Chart

B

A

150

200

250

300

350

400

ROL14000EG


GUIDES & ROLLERS







ThicknessNone 0 457 229 394 302631 38 543 271 411 341632 51 568 284 416 354633 64 594 297 421 367634 76 619 310 425 379635 102 670 335 437 405

None 0 508 254 406 310631 38 594 297 421 367632 51 619 310 429 378633 64 645 322 430 392634 76 670 335 437 403635 102 721 360 445 430

None 0 610 305 427 376631 38 699 349 445 416632 51 724 362 445 429633 64 749 375 449 441634 76 775 387 454 454635 102 826 413 460 479

special order 0 762 381 452 452

ROL15 Sizing Chart

B

A

450

500

600

750

ROL15000EG


GUIDES & ROLLERS


202

21

NOTE: Yoke and axle are carbon steel and roll is cast iron, available with Electro-zinc plated (EG) finish by special order

A

RS

One Rod Roller Hanger• Size Range: 65nb to 600nb• Suspends pipe from a single hanger rod where longitudinal

movement may occur in the pipe due to expansion or contraction

• Finish: Black

PIPE ROLLER 610

Nominal Steel RS A Max. Rec. Pipe Size (nb) (mm) Load (N)

6100250PL 65 M12 162 1006100300PL 80 M12 178 13806100400PL 100 M16 214 21156100500PL 125 M16 259 30506100600PL 150 M20 291 34706100800PL 200 M20 351 34706101000PL 250 M20 416 42906101200PL 300 M20 479 53406101400PL 350 M24 530 53406101600PL 400 M24 570 53406101800PL 450 M24 654 62306102000PL 500 M32 686 71156102400PL 600 M32 824 7115


GUIDES & ROLLERS


21

Pipe Roller Support• Size Range: 65nb to 600nb• Supports pipe from a sub-structure or structural member

where longitudinal movement may occur due to expansion or contraction

• Finish: Black

A

B

C

D

E

PIPE ROLLER 615

Nominal Steel A B C D E Max. Rec. Pipe Size (nb) (mm) (mm) (mm) (mm) Bolt Size Load (N)

6150250PL 65 89 32 102 48 3/8” x 1-1/4” 26706150300PL 80 102 51 116 57 3/8” x 1-1/4” 26706150400PL 100 132 51 124 73 1/2” x 1-1/2” 31156150500PL 125 152 76 176 77 1/2” x 1-1/2” 31156150600PL 150 172 79 203 102 1/2” x 1-1/2” 44506150800PL 200 210 86 254 132 5/8” x 1-3/4” 57856151000PL 250 252 133 318 160 5/8” x 1-3/4” 57856151200PL 300 295 140 356 191 5/8” x 1-3/4” 102306151400PL 350 330 146 403 213 5/8” x 1-3/4” 133456151600PL 400 370 203 454 240 5/8” x 2” 177956151800PL 450 405 241 508 265 5/8” x 2” 177956152000PL 500 435 254 559 292 3/4” x 2-1/4” 177956152400PL 600 522 305 664 354 3/4” x 2-1/4” 17795

NOTE: Chair and axle are carbon steel and roll is cast iron, available with Electro-zinc plated (EG) finish by special order


GUIDES & ROLLERS


204

21

• Medium duty• Supports pipe from a sub-structure, structural member or

strut channel where longitudinal movement may occur dueto expansion or contraction

• One connector nut, medium duty• Finish: Electro-zinc plated (EG)

One Rod Pipe Expansion Slides PESMO

Max. Δ L H L W Fmax (N)Description Temp RS (travel, (mm) (mm) (mm)

(deg C) mm)

580560 PESMO 120º C M10/M12 80 42 122 67 2300 2300

Ceiling FloorMount Mount

ΔL

L

10.5 x 22

12.5

H

RS

W

Floor Mounted

Ceiling Mounted

Fmax

Fmax

+120° C


GUIDES & ROLLERS


21

• Heavy duty• Supports pipe from a sub-structure, structural member or


• One connector nut, heavy duty• Finish: Electro-zinc plated (EG)

One Rod Pipe Expansion Slides PESHO


(deg C) mm)

580564 PESHO 240°C M12/M16 120 51 150 100 5000 9000


ΔL

L

10.5 x 22

12.5

H

RS

W

Floor Mounted

Ceiling Mounted

Fmax

Fmax

+120° C


GUIDES & ROLLERS


206

21



• One connector nut with flange for attachment to strut channels, medium duty


One Rod Pipe Expansion Slides PESMOS


(deg C) mm)

580561 PESMOS 120º C M10/M12 80 46 122 150 2300 2300


ΔL

RS

H

W

100

40

L

12.5 x 20.0

Floor Mounted

Ceiling Mounted

Fmax

Fmax

+120° C


GUIDES & ROLLERS


21



• One connector nut with flange for attachment to strut channels, heavy duty


One Rod Pipe Expansion Slides PESHOS


(deg C) mm)

580565 PESHOS 240º C M12/M16 120 57 150 188 5000 9000


ΔL

RS

H

W

160

40

L

13 x 25

Floor Mounted

Ceiling Mounted

Fmax

Fmax

+120° C


GUIDES & ROLLERS


208

21



• Two connector nuts, medium duty• Finish: Electro-zinc plated (EG)

Two Rod Pipe Expansion Slides PESMT


(deg C) mm)

580562 PESMT 120º C M10/M12 140 42 165 67 2300 2300


ΔLRS

H

W

12.5

123

L

10.5 x 22Floor Mounted

Ceiling Mounted

Fmax

Fmax

+120° C


GUIDES & ROLLERS


21



• Two connector nuts, heavy duty• Finish: Electro-zinc plated (EG)

Two Rod Pipe Expansion Slides PESHT


(deg C) mm)

580566 PESHT 240º C M12/M16 245 51 275 100 5000 9000


ΔL

RSRS

H

W

13210

L

13 x 25

Floor Mounted

Ceiling Mounted

Fmax

Fmax

+120° C


GUIDES & ROLLERS


210

21



• Two connector nuts with flange for attachment to strutchannels, medium duty


Two Rod Pipe Expansion Slides PESMTS


(deg C) mm)

580563 PESMTS 120º C M10/M12 140 46 165 150 2300 2300


ΔL

RS

H

W

100

40

123

L

12.5 x 20.0

Floor Mounted

Ceiling Mounted

Fmax

Fmax

+120° C


GUIDES & ROLLERS


21



• Two connector nuts with flange for attachment to strutchannels, heavy duty


Two Rod Pipe Expansion Slides PESHTS


(deg C) mm)

580567 PESHTS 240º C M12/M16 245 57 275 188 5000 9000


ΔL

RSRS

H

W160

210L

13 x 25

Floor Mounted

Ceiling Mounted

Fmax

Fmax

+240° C



212


CADDY® SEISMIC SWAY BRACING


22

TP220 TP225 TP225G TP225A


TP230

Page 216

TP230G

Page 216

TP235

Page 217

TP240

Page 217

TP280

Page 218

SB55

Page 219

CADDY® EZ BRACE

Page 220




214

22

Quick Clamp Sway Brace Pipe Attachment• Size Range: 1-1/4” thru 8” braced pipe• Used for laterally bracing pipe against sway disturbances• Complies with NFPA® 13• Snap off nut design at recommended torque• Finish: Electro-zinc galvanized (EG)

SWAY BRACING TP220

A (Service B (Brace CPipe Size) (in) Pipe Size) (in) (in)

TP2201000125EG 1-1/4 1 4-13/16TP2201000150EG 1-1/2 1 5-1/8TP2201000200EG 2 1 5-5/16TP2201000250EG 2-1/2 1 6-1/2TP2201000300EG 3 1 7-1/4TP2201000400EG 4 1 8-1/8TP2201000500EG 5 1 8-5/8TP2201000600EG 6 1 10TP2201000800EG 8 1 11-3/4TP2201250125EG 1-1/4 1-1/4 5-1/4TP2201250150EG 1-1/2 1-1/4 5-1/2TP2201250200EG 2 1-1/4 6TP2201250250EG 2-1/2 1-1/4 6-1/2TP2201250300EG 3 1-1/4 7-1/4TP2201250400EG 4 1-1/4 8-5/16TP2201250500EG 5 1-1/4 9-1/4TP2201250600EG* 6 1-1/4 10-1/2TP2201250800EG* 8 1-1/4 12

NOTE: Also available in Plain (PL) finish

Brace Pipe

Service Pipe

*Not Listed

C

B

A




22


Quick End Threadless Brace Fitting• Size Range: 1” and 1-1/4” bracing pipe • Used to install lateral and/or

longitudinal sway bracing• Complies with NFPA® 13• Finish: Electro-zinc plated (EG)

SWAY BRACING TP225 & TP225G


Quick Loader Adapter Plate• Allows TP225 to be attached with two or three

attachment bolts• Finish: Electro-zinc plated (EG)• Complies with NFPA® 13

SWAY BRACING ADAPTER PLATE TP225A

Fig. A (Brace B C DNo. Pipe Size) (in) (in) (in) (in)

TP225G100EG* 1 1 1-3/8 1-1/4 1-1/4TP225G125EG* 1 1-1/4 1-5/8 1-1/4 1-1/4TP225100EG 2 1 1-3/8 1-3/8 1-1/8TP225125EG 2 1-1/4 1-5/8 1-3/8 1-1/8

*Heavy Duty Assembly

Fig. 2

TP225

TP225G

TP225A000EG 4 3/4"

1 1/2"

1 1/2"

D

C

BA

17/32”

B C

D

9/16" DIA.

Fig. 1

A

Fig. 2

Fig. 1

C B

A

TP225

TP225G




216

22


Quick In-line Lateral & Longitudinal Sway Brace Clamp• Size Range: 1” thru 8” braced pipe • Used for laterally and longitudinally bracing piping against sway• Complies with NFPA® 13• Finish: Electro-zinc plated (EG)

SWAY BRACING TP230 & TP230G

Fig. A (Service B (Brace C DNo. Pipe Size) (in) Pipe Size) (in) (in) (in)

TP2301000100EG 1 1 1 3/16 1TP2301000125EG 1 1-1/4 1 3/16 1TP2301000150EG 1 1-1/2 1 3/16 1TP2301000200EG 1 2 1 3/16 1TP2301000250EG 1 2-1/2 1 3/16 1TP2301000300EG 1 3 1 3/16 1TP2301250125EG 1 1-1/4 1-1/4 3/16 1TP2301250150EG 1 1-1/2 1-1/4 3/16 1TP2301250200EG 1 2 1-1/4 3/16 1TP2301250250EG 1 2-1/2 1-1/4 3/16 1TP2301250300EG 1 3 1-1/4 3/16 1

TP230G1000400EG* 2 4 1 3/16 1TP230G1000500EG* 2 5 1 3/16 2TP230G1000600EG* 2 6 1 3/16 2TP230G1000800EG* 2 8 1 1/4 2TP230G1250400EG* 2 4 1-1/4 3/16 1TP230G1250500EG* 2 5 1-1/4 3/16 2TP230G1250600EG* 2 6 1-1/4 3/16 2TP230G1250800EG* 2 8 1-1/4 1/4 2

*Heavy Duty Assembly

TP230

TP230G

C

D

B

A

Fig. 2

Brace Pipe

Fig. 1




22



Quick Tab Welded Longitudinal Sway Brace Fitting• Size Range: 1” and 1-1/4” bracing pipe • Used for longitudinally bracing piping against

sway when welding is an option• Complies with NFPA® 13• Finish: Electro-zinc plated (EG)

SWAY BRACING TP235

A (Brace B CPipe Size) (in) (in) (in)

TP235100EG 1 3/16 1TP235125EG 1-1/4 3/16 1

Quick 4-way Longitudinal Sway Brace Clamp• Size Range: 1” and 1-1/4” bracing pipe• Used for longitudinally bracing lateral sway bracing

against sway disturbance• Complies with NFPA® 13• Also used for riser bracing• Finish: Electro-zinc plated (EG)

SWAY BRACING TP240

A (Brace B B1Pipe Size) (in) (in) (in)

A x A1

TP2401000100EG 1 x 1 1-3/8 1-3/8TP2401250125EG 1-1/4 x 1-1/4 1-3/8 1-5/8

B B1

A

A1

A

B

C




218

22

Threaded Sway Brace Fitting• Size Range: 1” pipe • Used with Models: #400, #450, #610, and any length of 1”

pipe to restrain pipe from swaying during an earthquake• Finish: Electro-zinc plated (EG)

SWAY BRACING TP280

UL® LISTING & TESTED WORKING LOAD CHART FOR ERICO® SWAY BRACES*

NOTE: Plain (PL) finish available by special order

Pipe Size Style(in)

TP2800100EG 1 ABTP280P0100EG 1 A

Pipe Working Model Model Model Model Model Model Model Size Load Per TP220** TP225 TP225G TP230 TP230G TP235 TP240(in) U.L. 203A

2 380 LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED2-1/2 395 LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED

3 435 LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED 3-1/2 540 LISTED LISTED LISTED NOT LISTED LISTED LISTED LISTED

4 655 LISTED** LISTED LISTED NOT LISTED LISTED LISTED LISTED5 935 LISTED LISTED LISTED NOT LISTED LISTED LISTED LISTED6 1265 NOT LISTED NOT LISTED LISTED NOT LISTED LISTED LISTED NOT LISTED8 2015 NOT LISTED NOT LISTED LISTED NOT LISTED LISTED LISTED NOT LISTED

1. ERICO Sway Braces are UL® tested and Listed for use with ASTM® schedule 10 and 40 brace pipe

2. ERICO Sway Braces meet the full UL rated load when used with 1” or 1-1/4” schedule 40 brace pipe

3. ERICO Sway Braces meet the UL requirement that lateral braces must support a load equal to 1-1/2 times the working load without slippage. Actual working load capacity can be more than UL203A above. Seeour rated loads on the UL website.

Style AB

Style A

*See website for latest updates at www.erico.com** TP220 list only through 4” pipe for schedule 10 pipe

Welded Structural Attachment 320W0050PL




22

SB55N Easy Attach Sway Brace• Lateral and longitudinal sway bracing attachments • cULus Listed• Complies with NFPA® 13• Set screw torque in the brace attachment is 160 in-lbs• Structural attachment bracket (L100000EG) included with

SB55N, additional L100000EG attachments can be ordered separately for added attachment strength

• For use with ERIC16• Finish: Electro-zinc plated (EG) and Plain (PL) finish

SWAY BRACING SB55

Brace Sprinkler Working Max. Rec. Attach-Description Pipe Finish Pipe Size to Load Torque Value ment

Size be Braced (lbs) for Bolts Hole(in) (in) (ft lbs) Size (in)

SB55N1000037EG Sway brace clamp, 3/8 x 1 1 EG 1 - 2-1/2 400 20 3/8SB55N1000037PL Sway brace clamp, 3/8 x 1 1 Plain 1 - 2-1/2 400 20 3/8SB55N1000050EG Sway brace clamp, 1/2 x 1 1 EG 1 - 3-1/2 600 50 1/2SB55N1000050PL Sway brace clamp, 1/2 x 1 1 Plain 1 - 3-1/2 600 50 1/2SB55N1000062EG Sway brace clamp, 5/8 x 1 1 EG 1-4 700 90 5/8SB55N1000062PL Sway brace clamp, 5/8 x 1 1 Plain 1-4 700 90 5/8SB55N1250037EG Sway brace clamp, 3/8 x 1.25 1-1/4 EG 1 - 2-1/2 400 20 3/8SB55N1250037PL Sway brace clamp, 3/8 x 1.25 1-1/4 Plain 1 - 2-1/2 400 20 3/8SB55N1250050EG Sway brace clamp, 1/2 x 1.25 1-1/4 EG 1 - 3-1/2 600 50 1/2SB55N1250050PL Sway brace clamp, 1/2 x 1.25 1-1/4 Plain 1 - 3-1/2 600 50 1/2SB55N1250062EG Sway brace clamp, 5/8 x 1.25 1-1/4 EG 1-4 700 90 5/8SB55N1250062PL Sway brace clamp, 5/8 x 1.25 1-1/4 Plain 1-4 700 90 5/8

Attachment FinishHole Size

SB50N038EG 3/8 EGSB50N050EG 1/2 EGSB50N062EG 5/8 EGSB50N038PL 3/8 PlainSB50N050PL 1/2 PlainSB50N062PL 5/8 Plain

Additional SB50N if needed

SB50N

AttachmentHole Size

SB55N

BracePipe



220

CADDY® SEISMIC SWAY BRACING 22

• The fast easy to install CADDY EZ BRACE seismic sway brace• No disassembly of hardware, it stays in place• Patent pending design• Call for availability• Finish: Electrogalvanised, Hot dip galvanised (HDG) and Plain (PL)

CADDY® EZ BRACE

Brace Service Pipe Size (in) Pipe Size(in)

CSBEZ1000100EG 1 1CSBEZ1000125EG 1 1-1/4CSBEZ1000150EG 1 1-1/2CSBEZ1000200EG 1 2CSBEZ1000250EG 1 2-1/2CSBEZ1000300EG 1 3CSBEZ1000400EG 1 4CSBEZ1000500EG 1 5CSBEZ1000600EG 1 6CSBEZ1000800EG 1 8CSBEZ1250100EG 1-1/4 1CSBEZ1250125EG 1-1/4 1-1/4CSBEZ1250150EG 1-1/4 1-1/2CSBEZ1250200EG 1-1/4 2CSBEZ1250250EG 1-1/4 2-1/2CSBEZ1250300EG 1-1/4 3CSBEZ1250400EG 1-1/4 4CSBEZ1250500EG 1-1/4 5CSBEZ1250600EG 1-1/4 6CSBEZ1250800EG 1-1/4 8

Pictured with our SB55N product for structuralattachment.


TECHNICAL SECTION


N

W E

S

Quality Assurance ISO 9001:2000, Technical Tests . . . . . . . . . . . . . . . . . . . . . Page 218

Fire Rating Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 219

Corrosion Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 221

Load Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 222

CADDY® Productsa. Spring Steel Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 223

b. CADDY “Bolt on” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 223

Fixing of Pipe Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 223

Pipe Sizing Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 224

Channels and Cantilever Arms Load Values a. C-channels load values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 225

b. C-cantilever arms load values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 225

c. CADDY® ERISTRUT channels load values . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 226

d. CADDY ERISTRUT cantilever arms load values . . . . . . . . . . . . . . . . . . . . . . . Page 228


TECHNICAL SECTION


222

N

W E

S

Quality AssuranceQuality Assurance ISO 9001:2000Quality Control includes material and product performace testing - Heat treatment and coating/painting ("corrosion protection") are part of our process.We complete performance testing to validate the partshave been hardened properly and meet tensile load testing. We also complete performance testing to validate the coating is adequate.

Test and Control ProcedureERICO systematically conducts tests on finished productsaccording to the procedures of the ERICO quality assurance manual.The test methodology is confirmed by independent laboratory tests, who have issued certificates according to DIN 18168 for the tested CADDY products (Ref. seebelow).

Research and Development

ERICO’S RESEARCH AND DEVELOPMENT DEPARTMENTIS CONSTANTLY RESEARCHING, DESIGNING AND DEVELOPING NEW FIXINGS AND FASTENERS, AND ATTHE SAME TIME IMPROVING THE CURRENT RANGE OFCADDY PRODUCTS.


TECHNICAL SECTION


N

W E

S

The fire-testPer ERICO’s request, the MPA, Braunschweig, Germany, conducted several tests on CADDY® Fasteners, which were installed withincable tray systems and other applications. These tests were conducted within a calibrated fire-chamber to obtain appropriate Fire-Rating Classification approvals.

The fire chamber tests were conducted in accordance to DIN4102-12. The temperatureincrease is according to the graph curve as detailed. The Fire Rating is achieved providingthat the installation does not collapse or there is no “short circuit” within the system.

All systems and products were subjected to two fire tests. Theweight of several cables within the cable trays is simulated by steel chains.

Total loads of the two systems are:

• 100 N/m• 200 N/m

Temperature-curve

Installation within fire chamber.

Time (MN)

ETK-curve

Tem

p. I

ncr

ease

(K

)

Chains applied as weight simulation

E30: 30 minutes without deviation.



The tests were conducted in association with a Swissmanufacturer of cables and a German manufacturerof cable trays.


TECHNICAL SECTION


224

N

W E

S

RIGD CADDY® ERISTRUT ISN+TFZ+C-ECSTRUT+TFZ+ISSP

CADDY® SLICK C-EC+RIGD+ ISSPSTRUT NUT CADDY SLICK+PLN

The systems after the fire-test

ABP certificate

Nr. P-3414/1904-MPA BS

(according to German standards)

The tests were successfully concluded within the specified norms.

FIRE

E90 Certification for:

• Strut channels and canti -lever arms 41x41x2.5 mm

• CADDY® SLICK Strut Nut• ISN-nut• ISSP-plate• PLN-plate• C-EC Clamp• RIGD• Several products used in

combination within these systems

F30 Certification for:

• CADDY® SPEED LINK• CADDY® SPEED LINK LD

Meets the fire rating requirementsof DIN 4102-2 for 30 minutes at 30 percent of rated load

Fire Rating Classification


TECHNICAL SECTION


N

W E

S

CADDY® COATCADDY® COAT is a patented multi-layer system consisting of a zinc phosphate coating for optimum adhesion and creep resistance covered by a nominal 20 microns of a lead-free cathodic electrocoat finish for exceptional corrosion resistance.

CP - Copper-colored coatingCopper electroplated (no corrosion protection; foridentification purposes only).(Alternative finish is CADDY COAT)

EG - Electro-zinc platedThe anti-corrosion protection consists of an electrolytically applied zinc coating with a layer thickness of 8-15 micron or an equivalent treatment.This protection will withstand 90 hours saltspray test toSS-DIN 50021, ISO/R 1456-1970, ASTM B 117-90.

HDG - Hot Dip GalvanisedProtection against corrosion is provided by hot dip galvanising in accordance with DIN 50976+Zn-D, NFA 91-121; NEN 1275. The zinc layer thickness is 50-70 micron (350-500 g/m2).The finish can be used for indoor and outside applications and is suitable for use in humid and mildly corrosive environments.

PG - Pre-galvanised Continuous mill annealed and galvanised. Cut edges and welded areas are not galvanised. Zinc near theuncoated metal becomes a sacrificial anode which protects the bare areas after exposure. (ANSI/ASTM A525 and 526)

PL - Plain or BlackPlain without coating or Black

PPC - Polyester powder coatingPolyester thermoset powder coating with a minimumcoating thickness of 60 micron color brown for copperpipe and white for PVC pipe clips.

SS - Stainless SteelStainless steel hammer-on fasteners are made of austenitic stainless steel type X12. Cr Ni 17-7 (AISI 302,Standard no. 1.4310, according to DIN 17224).CADDY components C20, C30, C45, 5000, 6000 and allCR clamps are made of austenitic stainless steel type X5Cr Ni 18-10 (AISI 304, standard n° 1.4301).ERICO CADDY profiles, the associated fixing componentand the strut nuts are normally made of standardn° 1.4571. All stainless steel finish CADDY® MACROFIX,CHC (channel clip) and SPC (single piece clips) are manufactured from AISI 316 or 316L stainless steel.

ERICO-fixing products made of stainless steel are intended for indoor and outdoor use in non-corrosiveenvironments or where only mildly corrosive conditionsapply.

NOTE:Because stainless steel is susceptible to stress corrosionin chloride environments it is forbidden to use theseERICO-fixing products in chloride environments(indoor swimming pools, etc.).When selecting ERICO stainless steel products for acorrosive environment, it is always best to consult witha corrosion engineer and, if possible, conduct tests inthe environment involved under actual operatingconditions or ask ERICO for engineering approval andload rating.

Corrosion Protection


TECHNICAL SECTION


226

N

W E

S

Maximum Recommended Load in NEWTONSRecommended working loads are static load limit values.

Load ratings are only valid within +5 to + 35°C unlessotherwise specified in this catalogue. All loads should be applied VERTICALLY to the normalfixing product installation except as may be indicatedotherwise in diagrams. If no direction is indicated or azero load rating is given, the product is to be used forpositioning purposes only.A load rating in this catalogue is only applicable if theload-bearing capacity of the supporting element (purlin,angle beam, flange, bar, etc.) is adequate. Any repositioning, deformation, or cracking of the supporting element should be a warning that the loadbearing capacity of the element is exceeded. In such situations, take preventive measures: consult a structural engineer, or consult ERICO® for advice.

NOTE:ERICO will be pleased to advise on special applications or loading situations.

1kg = 9.806N

Load Rating


TECHNICAL SECTION


N

W E

S

CADDY® Spring Steel Clips CADDY® “Bolt on”

1a. Description

CADDY® spring steel clips fromERICO® are manufactured fromheat treated spring steel and, as a single or combined fixing system will primarily apply to steel beam applications.

The fixing method relies on theuse of the spring retention force,loads of up to 90 kg (with a 4:1 safety factor) can be carriedthrough the clamping force.

1b. Installation Advice

The installation of CADDY springsteel clips is simple and easy.

In each box of CADDY products,you will find a clear instructionsheet with all appropriate technical information.

1c. Basic Guidelines

ERICO® DOES NOT RECOM-MEND THE INSTALLATIONOF CADDY SPRING STEELCLIPS ONTO ALUMINIUMSECTION:• Because aluminium is a sof-

ter material, the clampingeffect would be reduced.

• The bi-metal connection between the aluminium and zinc coated clips wouldcreate a galvanic corrosivereaction causing the alumini-um to corrode.

ERICO® RECOMMENDSSPRING STEEL FOR ONLYINDOOR NON-CORROSIVEENVIRONMENTS.

NEVER APPLY ADDITIONAL HOT DIP GALVANISING TO CADDYSPRING STEEL CLIPS:

• This would reduce or eliminate the spring steelretention force.

• The appropriate corrosionprotection has already beenapplied.

2a. Description

For the installation of this type of CADDY® fixing, sometechnical details have to betaken into consideration.

In particular the torque required, as indicated on therequired technical information.

2b. Installation Advice

The 8.8 grade high tensile steelscrew has a cupped or hollowcone point of contact to DIN 78.

This helps ensure a constantcontact pressure with a highresistance to loosening or uns-crewing.

The endurance of a clampedconnection is determined by thetorque required.

2c. Indirect Clamp

In this application, the bolt setting forces are transferred to the clamping component.

Bolts to tensile stress are 8.8grade high tensile steel, to DIN ISO 939.

In most applications, CADDY®

clamping components are tightened with an open-endedor ring spanner. The tablebelow gives a “guideline value”derived from experience for the force and leverage lengthrequired for grades 6.8 and 8.8.

Explanation of the diagram:

- pre-tension - Fv- clamping force - Fk- max. spring tension - Fmax- clamping range - Fb- usable action of spring - Mn

Do not insertany secondarycomponent between thebeam and theCADDY springsteel clip

Up to a 15degree inclination fromthe vertical axis is acceptable

Bolt grade 8.8 high tensile steel, DIN EN 20898-1 : 1991

Screw Manual Wrenchsize force N length mm

M6 375 110

M8 380 120

M10 390 170

M12 400 260

M16 430 530

Code A(mm) N

2H4 2-3 700

4H24 3-8 900

4H58 8-14 900

4H912 14-20 900

Code A(mm) M N

4H24i 3-8 M6 150

4H58i 8-14 M6 150


TECHNICAL SECTION


228

N

W E

S

NominalSize

PexPipe OD

HPDE Ductile CPVCActual OD Iron OD Pipe OD

PressurePVC FRC FRC

PVC OD (Pipe) (Cutter)Copper PVC SteelPipe OD Pipe OD Pipe OD

8 14 1410 17 1715 13 21 2116 16 1620 19 27 27 2025 25 34 33 32 34 2532 32 42 42 40 4240 38 43 48 48 50 4850 51 55 60 60 56 6065 64 69 75 76 6380 76 82 89 89 7590 89 90 90100 102 110 113 114 131 122 110 122125 127 140 140 125150 152 160 165 168 189 177 160 177175 178200 203 225 219 219 225 232225 229 250 250 269 257 259250 254 273 280 286300 303 315 324 315 350 335 315 345375 400 430 415 426400 406450 457 519 505 507500 508 560 560525 594 584600 60 680 665675

Pipe Sizing Chart


TECHNICAL SECTION


N

W E

S

C-Profile loads data

C-Cantilever loads data

All load ratings in NEWTON [N] !�zul =160 N/mm2

fzul =l/200y y

z

z

EOL loading case A loading case B loading case C

L[mm]

250 738 2034 738 1477 3255 1477 554 1194 554500 369 509 369 738 814 738 277 298 277750 246 226 226 492 362 362 185 133 133

1000 185 127 127 369 203 203 138 75 751250 148 81 81 295 130 130 111 48 481500 123 57 57 246 90 90 92 33 331750 105 42 42 211 66 66 79 24 242000 92 32 32 185 51 51 69 19 19

F from F fromrecommended recommended recommended

tension deflection load[N] [N] [N]





500 750 1000 1250 1500 1750 2000250

N

mm

0

300

600

900

1200

1500ly mm4 8791lz mm4 2788Sc mm 8.336St mm 9.665A mm2 65.57

180 200 220 240 280260 300160

N

mm

0

100

200

300

400

500

600ly mm4 8791lz mm4 2788Sc mm 8.336St mm 9.665A mm2 65.57

C-EOL loading case A loading case B loading case C loading case D

L[mm]F from F from

recommended recommended recommendedtension deflection load

[N] [N] [N]







160 577 686 577 577 915 577 288 1164 288 288 343 288180 513 542 513 513 723 513 256 920 256 256 271 256200 462 439 439 462 585 462 231 745 231 231 220 220220 420 363 363 420 484 420 210 616 210 210 181 181240 385 305 305 385 407 385 192 517 192 192 152 152260 355 260 260 355 346 346 178 441 178 178 130 130280 330 224 224 330 299 299 165 380 165 165 112 112300 308 195 195 308 260 260 154 331 154 154 98 98

CBA

qF

D

FF1 F1


fzul =l/200y y

z

zCBAfff

q


TECHNICAL SECTION


230

N

W E

S

CADDY® ERISTRUT 41 x 21 x 2.5 mm without slots

CADDY ERISTRUT 41 x 21 x 2.5 mm with slots


fzul =l/200y y

z

zCBAfff

q


fzul =l/200y y

z

zCBAfff

q

loading case A loading case B loading case C

L[mm]

500 1817 2204 1817 3634 3527 3527 1363 1294 12941000 908 551 551 1817 882 882 681 323 3231500 606 245 245 1211 392 392 454 144 1442000 454 138 138 908 220 220 341 81 812500 363 88 88 727 141 141 273 52 523000 303 61 61 606 98 98 227 36 363500 260 45 45 519 72 72 195 26 264000 227 34 34 454 55 55 170 20 204500 202 27 27 404 44 44 151 16 165000 182 22 22 363 35 35 136 13 135500 165 18 18 330 29 29 124 11 116000 151 15 15 303 24 24 114 9 9







DC loading case A loading case B loading case C

L[mm]

500 1309 1824 1309 2619 2918 2619 982 1070 9821000 655 456 456 1309 730 730 491 268 2681500 436 203 203 873 324 324 327 119 1192000 327 114 114 655 182 182 245 67 672500 262 73 73 524 117 117 196 43 433000 218 51 51 436 81 81 164 30 303500 187 37 37 374 60 60 140 22 224000 164 28 28 327 46 46 123 17 174500 145 23 23 291 36 36 109 13 135000 131 18 18 262 29 29 98 11 115500 119 15 15 238 24 24 89 9 96000 109 13 13 218 20 20 82 7 7







0

500

1000

1500

2000

2500

3000

1000 2000 3000 4000 5000 6000500

N

mm


0

500

1000

1500

2000

2500

3000

3500

4000

1000 2000 3000 4000 5000 6000500

N

mm



TECHNICAL SECTION


N

W E

S

AC loading case A loading case B loading case C

L[mm]

500 3811 10980 3811 7622 17569 7622 2858 6445 28581000 1905 2745 1905 3811 4392 3811 1429 1611 14291500 1270 1220 1220 2541 1952 1952 953 716 7162000 953 686 686 1905 1098 1098 715 403 4032500 762 439 439 1524 703 703 572 258 2583000 635 305 305 1270 488 488 476 179 1793500 544 224 224 1089 359 359 408 132 1324000 476 172 172 953 275 275 357 101 1014500 423 136 136 847 217 217 318 80 805000 381 110 110 762 176 176 286 64 645500 346 91 91 693 145 145 260 53 536000 318 76 76 635 122 122 238 45 45







1000 2000 3000 4000 5000 60000

1000

2000

3000

4000

5000

6000

7000

8000

500

N

mm


CADDY® ERISTRUT 41 x 41 x 2.5 mm without slots

CADDY ERISTRUT 41 x 41 x 2.5 mm with slots

loading case A loading case B loading case C

L[mm]

500 4966 12929 4966 9931 20686 9931 3724 7588 37241000 2483 3232 2483 4966 5171 4966 1862 1897 18621500 1655 1437 1437 3310 2298 2298 1241 843 8432000 1241 808 808 2483 1293 1293 931 474 4742500 993 517 517 1986 827 827 745 304 3043000 828 359 359 1655 575 575 621 211 2113500 709 264 264 1419 422 422 532 155 1554000 621 202 202 1241 323 323 466 119 1194500 552 160 160 1103 255 255 414 94 945000 497 129 129 993 207 207 372 76 765500 451 107 107 903 171 171 339 63 636000 414 90 90 828 144 144 310 53 53








fzul =l/200y y

z

zCBAfff

q

0

2000

4000

6000

8000

10000

1000 2000 3000 4000 5000 6000500

N

mm



TECHNICAL SECTION


232

N

W E

S

Cantilevers loads data

KH loading case A loading case B loading case C loading case D

L[mm]F from F from

recommended recommended recommendedtension deflection load

[N] [N][N]







150 8276 19846 8276 8276 26462 8276 4138 33668 4138 4138 9923 4138200 6207 11164 6207 6207 14885 6207 3103 18938 3103 3103 5582 3103250 4966 7145 4966 4966 9526 4966 2483 12120 2483 2483 3572 2483300 4138 4962 4138 4138 6615 4138 2069 8417 2069 2069 2481 2069400 3103 2791 2791 3103 3721 3103 1552 4735 1552 1552 1395 1395450 2759 2205 2205 2759 2940 2759 1379 3741 1379 1379 1103 1103550 2257 1476 1476 2257 1968 1968 1129 2504 1129 1129 738 738600 2069 1240 1240 2069 1654 1654 1034 2104 1034 1034 620 620650 1910 1057 1057 1910 1409 1409 955 1793 955 955 528 528700 1773 911 911 1773 1215 1215 887 1546 887 887 456 456750 1655 794 794 1655 1058 1058 828 1347 828 828 397 397

ECB loading case A

L[mm] recommended load [N]

320 4470470 3170635 3330790 2800


fzul =l/200y y

z

zCBA

qF

D

FF1 F1

B

Ø 14 mm

A

180 200 220 240 280260 300160

N

mm

0

2000

4000

6000

8000

10000 ly mm4 70880lz mm4 89320Sc mm 23.03St mm 18.27A mm2 320.2


INDEX

Description Item # Page PageDescription Item #


122

1070075EG

1070100EG

1070125EG

1070150EG

1070200EG

1080075EG

1080100EG

1080125EG

1080150EG

1080200EG

1090075EG

1090100EG

1090125EG

1090150EG

1090200EG

10GDT12-17

10GTD17-22

10MEBN

115M0050EG

115M0075EG

115M0100EG

115M0125EG

115M0150EG

115M0200EG

115M0250EG

115M0300EG

115M0400EG

115M0500EG

115M0600EG

115M0800EG

122M10MA

122M10TI

122M8MA

122M8TI

122T10

12EM24-2

12EM58-2

12EM912-2

12M24SM-2

12M58SM-2

12M912SM-2

12P24SM

12P4SM

12P58SM

12P912SM

16EM24

16EM58

16EM912

20EM24

20EM58

20EM912

171690

597816

597817

597818

597819

597821

597822

597823

597824

597825

597826

597827

597828

597829

597831

597832

160380

160390

172140

597860

597870

597880

597890

597900

597910

597920

597930

597940

597950

597960

597970

174700

175070

174690

174980

160240

179810

179820

179830

179690

179700

179710

175220

175210

175230

175240

171740

171490

173570

171800

171950

173580

107

34

34

34

34

34

35

35

35

35

35

36

36

36

36

36

113

113

117

25

25

25

25

25

25

25

25

25

25

25

25

107

108

107

108

108

195

195

195

194

194

194

99

99

99

99

101

101

101

101

101

101

171960

171970

173590

170010

178510

170210

170170

173420

173600

173610

173620

179398

179399

179420

179421

179422

179423

179424

179425

179426

179427

179428

179429

179430

179431

179432

179433

179434

179435

179436

179312

179313

179314

179315

179316

179317

179318

179319

179320

179321

179322

179323

179324

178300

178301

178302

178303

178304

178305

178306

178307

178308

101

101

101

94

95

96

96

95

101

101

101

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

42

42

42

42

42

42

42

42

42

42

42

42

42

29,41

29,41

29,41

29,41

29,41

29,41

29,41

29,41

29,41

24EM24

24EM58

24EM912

2H4

2H4CT

2H4CTBB

2H4CTBW

2H4ST3

32EM24

32EM58

32EM912

4010050EG

4010075EG

4010100EG

4010125EG

4010150EG

4010200EG

4010250EGAU

4010300EG

4010400EG

4010500EG

4010600EG

4010800EG

4011000EG

4011200EG

4011400EG

4011600EG

4011800EG

4012000EG

4012400EG

4020050CP

4020075CP

4020100CP

4020125CP

4020150CP

4020200CP

4020250CP

4020300CP

4020350CP

4020400CP

4020500CP

4020600CP

4020800CP

4270050EG

4270075EG

4270100EG

4270125EG

4270150EG

4270200EG

4270250EGAU

4270300EG

4270400EG


INDEX


234

Description Item # Page

4270500EG

4270600EG

4270800EG

4H24

4H24-2

4H24CT

4H24CTBB

4H24CTBR-2

4H24CTBW

4H24I

4H24ST3

4H58

4H58-2

4H58CT

4H58CTBB

4H58CTBR-2

4H58CTBW

4H58I

4H58ST3

4H912

4H912-2

4H912CT

4H912CTBB

4H912CTBR-2

4H912CTBW

4H912ST3

4Z34CTS

5100050EG

5100075EG

5100100EG

5100125EG

5100150EG

5100200EG

5100250EGAU

5100300EG

5100400EG

5100500EGAU

5100600EGAU

5100800EG

5101000EG

5101200EG

5101400EG

5101600EG

5101800EG

5102000EG

5102400EG

5110050CPAU

5110075CPAU

5110100CPAU

5110125CPAU

5110150CPAU

5110200CPAU

178309

178310

178311

170020

172130

178520

170220

170280

170180

170150

171500

170030

179620

178530

170240

170300

170190

170250

171530

170040

179630

178540

170260

170310

170200

171640

172950

129325

129326

129327

129328

129329

129330

129331

129332

129333

129334

129335

129336

129337

129338

129339

129340

129341

129342

129343

179344

179345

179346

179347

179348

179349

29,41

29,41

29,41

94

117

95

96

193

96

94

95

94

193

95

96

193

96

94

95

94

193

95

96

193

96

95

114

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

45

45

45

45

45

45

179350

179351

179352

179353

179354

172960

179355

179356

179357

179358

179359

179360

179361

179362

179363

179364

179365

179366

160120

160130

160140

160050

160040

160060

160070

179780

179790

179800

172150

172160

175100

179650

179660

179670

172130

310221

171120

310265

310326

313301

313305

598501

598502

389890

388890

574420

589890

574410

599879

599880

584520

584560

45

45

45

45

45

114

46

46

46

46

46

46

46

46

46

46

46

46

101

101

102

99

99

99

99

195

195

195

101

101

101

195

194

194

117

144

116

144

144

140

151

89

89

89

89

166

166

166

137

137

138

138

Page

5110250CPAU

5110300CPAU

5110400CPAU

5110500CPAU

5110600CPAU

6Z34CTS

7000050PL

7000075PL

7000100PL

7000125PL

7000150PL

7000200PL

7000250PLAU

7000300PL

7000400PL

7000500PLAU

7000600PLAU

7000800PL

812EM24

812EM58

812EM912

812M24SM

812M4SM

812M58SM

812M912SM

8EM24-2

8EM58-2

8EM912-2

8EP24

8EP58

8EP912

8M24SM-2

8M58SM-2

8M912SM-2

8MEBN

AAC 41 X 41mm

AB

AC-2 41 X 21 X 2.5mm

AC-2 41 X 41 X 2.5mm

ADK

ADK421

BTK310-11mm

BTK310-13mm

BTK310-M10

BTK310-M12

CA10

CA6

CA8

C-E0L 27x18 180mm

C-E0L 27x18 300mm

C-Fix M10

C-Fix M10 X 40 mm

Description Item #


INDEX



C-Fix M6

C-Fix M8

C-Fix M8 X 30 mm

D1

D2

D3

DLP

E 0L 2m 27x18x1.25

EBC

EBC12P

EBC16M

EBC16MSM

EBC16P

EBC20M

EBC20MSM

EBC24M

EBC24MSM

EBC32M

EBC32MSM

EBC812M

EBC812MSM

EBC8P

ECN EO M10

ECN EO M6

ECN EO M8

EER

EERM10MA

EERM10TI

EERM8MA

EERM8TI

EERS

EERT10

EM24

EM24-2

EM24SM

EM58

EM58-2

EM58SM

EM912

EM912-2

EM912SM

EQLS130

EQLS50

EQLS85

EQV

EQVS

EQ-ZAB

EQZS

HB2

HDPC 110-116 mm

HDPC 140-146 mm

HDPC 159-165 mm

584500

584510

584530

336280

339100

339110

313310

599996

170380

172710

172590

172660

172720

172600

172670

172610

172680

172620

172690

160200

160180

172700

315350

315370

315340

171470

173190

173140

173180

173130

173080

160250

170050

179720

170530

170060

179730

172060

170070

179740

178150

597792

597791

597780

597590

597770

597790

597790

336030

577016

577020

577022

138

138

138

169

169

169

151

136

104

106

105

105

106

105

105

105

105

105

105

105

105

106

139

139

139

109

110

110

110

110

109

110

100

194

100

100

194

100

100

194

100

80

80

80

79

79

81

80

90

22,27

22,27

22,27

577002

577028

577003

577032

577004

577006

577007

577009

577011

577013

577048

577052

577055

577034

577061

577035

577066

577037

577038

577039

577041

577043

577045

187290

187300

188740

187280

188780

578680

578690

336290

336290

187360

187340

187350

190800

190830

190810

190820

170370

171590

170670

170680

170690

170660

589980

589990

590076

590077

170870

160340

160370

22,27

22,27

22,27

22,27

22,27

22,27

22,27

22,27

22,27

22,27

5

5

5

5

5

5

5

5

5

5

5

5

5

112

112

112

112

112

165

165

106

106

165

165

165

146

146

146

146

103

103

115

115

115

115

128

128

139

139

115

113

113

HDPC 20-24 mm

HDPC 219-226 mm

HDPC 25-30 mm

HDPC 267-273 mm

HDPC 31-35 mm

HDPC 40-45 mm

HDPC 48-53 mm

HDPC 60-65 mm

HDPC 76-81 mm

HDPC 88-94 mm

HDPCI 108-116 mm

HDPCI 138-145 mm

HDPCI 165-171 mm

HDPCI 19-23 mm

HDPCI 219-225 mm

HDPCI 24-28 mm

HDPCI 265-273 mm

HDPCI 33-37 mm

HDPCI 40-45 mm

HDPCI 47-52 mm

HDPCI 60-65 mm

HDPCI 73-78 mm

HDPCI 88-93 mm

HW10

HW12

HW6M

HW8

HW8M

IHT 20mm

IHT 25mm

INC8

INC8

ISN M10

ISN M6

ISN M8

ISSP Plate

ISSP Plate M10

ISSP Plate M6

ISSP Plate M8

J1

J2

K12

K16

K20

K8

KIT U Silent 450

KIT U Silent 600

KP27 M8 X 30 mm

KP27 M8 X 40 mm

KX

M10GTD12-17

M10GTD17-22


INDEX


236


M10MA24

M10MA4

M10MA58

M10MA912

M10MAB

M10MAJ1

M10MAJ2

M10TI

M10TI24

M10TI4

M10TI58

M10TI912

M10TIB

M10TIJ1

M10TIJ2

M6TI

M6TI24

M6TI4

M6TI58

M6TI912

M8GTD12-17

M8GTD17-22

M8MA24

M8MA4

M8MA58

M8MA912

M8MAB

M8MAJ1

M8MAJ2

M8TI

M8TI24

M8TI4

M8TI58

M8TI912

M8TIB

M8TIJ1

M8TIJ2

MACRO V ISO 200 M8/10














CADDY® MACROFIX 240LF 108-113 mm

173320

173310

173330

173340

173450

173370

173400

170910

175000

174990

175010

175020

175030

175050

175060

174800

174820

174810

174830

174840

160330

160360

173280

173270

173290

173300

173440

173360

173390

170900

174910

174900

174920

174930

174940

174960

174970

582450

582470

582480

582490

582500

582510

582530

582540

582550

582560

582580

582590

582600

582810

595045

96

96

96

96

117

103

103

116

97

97

97

97

116

104

104

116

97

97

97

97

113

113

96

96

96

96

117

103

103

116

97

97

97

97

116

104

104

78

78

78

78

78

78

78

78

78

78

78

78

78

78

4

595046

595047

595035

595048

595036

595037

595038

595039

595040

595041

595042

595043

595044

595930

595940

596460

595950

595955

596470

595960

595970

596480

596490

596500

596510

595860

595870

595880

595885

596450

595890

595900

595910

595920

596360

596380

596410

596220

596230

596250

596260

596270

596280

596290

596300

596310

596320

595720

595730

595740

595750

595755

4

4

4

4

4

4

4

4

4

4

4

4

4

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

9

9

9

9

9

9

9

9

9

9

9

9

9

190

190

190

190

190

Page

CADDY MACROFIX 240LF 123-128 mm


CADDY MACROFIX 240LF 14-19mm











CADDY MACROFIX 250 108-116mm





















CADDY MACROFIX 250 NI 108-116mm










CADDY® MACROFIX 250 NI 67-71mm



CADDY MACROFIX S M10 108-116mm





Description Item #


INDEX






















CADDY MACROFIX S NI M10 104-110mm




















PESHO

PESHOS

PESHT

PESHTS

PESMO

PESMOS

PESMT

PESMTS

PHW6

PHW8

PPRPS25H4

PPRPS25H6

PW2

595760

595770

595775

595780

595700

595710

595595

595600

595610

595620

595630

595640

595650

595660

595670

595675

595680

595690

595695

595520

595530

595535

595540

595550

595555

595560

595505

595510

595400

595410

595420

595430

595440

595450

595470

595475

595480

595490

595500

580564

580565

580566

580567

580560

580561

580562

580563

188840

188850

182450

182460

175590

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

189

189

189

189

189

189

189

189

189

189

189

189

189

189

189

189

189

189

189

189

205

207

209

211

204

206

208

210

112

112

131

131

113

175620

175610

175630

182580

182590

182680

182690

182620

182630

182700

182710

182470

182500

182480

182510

182650

182720

172030

175480

171760

171770

588430

588440

588620

588580

588570

588560

588610

588500

195800

195820

195805

195810

195815

195825

195845

195830

195835

195840

195851

195852

195950

195930

195920

195955

195925

195858

195854

195856

174350

174550

174460

114

114

114

132

132

132

132

132

132

132

132

130

130

130

130

132

132

98

98

98

98

126

126

128

127

127

127

127

126

120

120

120

120

120

120

120

120

120

120

122

122

121

121

121

121

121

123

123

123

147

147

147

PW2M10TIIN

PW2M8TIIN

PW2T10TIIN

RPS150T3 EG

RPS150T4 MCP

RPS150T7

RPS150T8

RPS300T3 MCP

RPS300T4 MCP

RPS300T7

RPS300T8

RPS50H4EG

RPS50H4HD

RPS50H6EG

RPS50H6HD

RPS600T4 MCP

RPS600T8

S24

S4

S58

S912

SBFF 6-6

SBFF 8-8

SBFK

SBMF 10-10

SBMF 8-10

SBMF 8-8

SBMK

SGBC

SL2/1

SL2/10

SL2/2

SL2/3

SL2/5

SL3/1

SL3/10

SL3/2

SL3/3

SL3/5

SLADCP

SLADS

SLD15L1

SLD15L10

SLD15L2

SLD15L3

SLD15L5

SLESH6x60

SLESM6x30

SLESM8x40

SLICK M10

SLICK M12

SLICK M6


INDEX


238


SLICK M8

SLWC

SLWPT

SO12A

SO16A

SO20A

SO24A

SO32A

SR24

SR4

SR58

SR912

CADDY® SUPERFIX 243 101-106mm

CADDY SUPERFIX 243 108-114mm















CADDY® SUPERKLIP 11.8-14.3mm

CADDY SUPERKLIP 14.3-16.8mm












T10

T10B

T10J1

T10J2

TDH

TDHAM10

TDHAM8

TDHIM8

TDHM10

TDHM6

TDHM8

174340

195853

195859

597811

597812

597813

597814

597815

171810

175540

175550

172020

400076

400077

400063

400064

400065

400066

400067

400068

400069

400070

595870

400071

400072

400073

400074

400075

389001

389002

389003

389004

389005

389006

389007

389008

389009

389011

389012

389013

389014

160260

160280

160220

160230

179920

179955

179945

179510

179950

179930

179940

147

122

123

37

37

37

37

37

98

98

98

98

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

84

84

84

84

84

84

84

84

84

84

84

84

84

116

116

104

104

111

111

111

111

111

111

111

159441

160010

160000

160020

160030

389520

389510

389500

590090

590080

187192

187193

187190

187191

389046

389047

389048

389049

389053

389054

389055

389056

389057

389058

389059

389061

389062

389063

389064

389065

389066

389067

389068

315085

315080

315045

315095

315090

315055

315105

315100

315065

315115

315110

315075

315040

315050

315060

315070

314995

315000

315015

111

97

97

97

97

88

88

88

166

166

179

179

179

179

85

85

85

85

85

85

85

85

86

86

86

86

86

86

86

86

86

86

86

149

149

150

149

149

150

149

149

150

149

149

150

150

150

150

150

149

149

149

Page

TDHP MK2

TI024

TI04

TI058

TI0912

TK300-13mm

TK300-11mm

TK300-9mm

TMN M10 x 40

TMN M8 x 30

TPC112

TPC238

TSGB16

TSGB24

TSM0037

TSM0050

TSM0062

TSM0075

TSM0087

TSM0112

TSM0137

TSM0162

TSMI0062

TSMI0075

TSMI0087

TSMI0100

TSMI0112

TSMI0125

TSMI0137

TSMI0150

TSMI0162

TSMI0200

TSMI0212

UA 506

UA 506

UA 506

UA 608

UA 608

UA 608

UA 810

UA 810

UA 810

UA 812

UA 812

UA 812

UD 506

UD 608

UD 810

UD 812

UM 506

UM 506

UM 608

Description Item #


INDEX



UM 608

UM 810

UM 810

UM 812

UM 812

UM 816

UM 816

UM506-2

UM608-2

UM810-2

UM812-2

VAFT

VDF M10 x 45

VF14

WDCM10

WDCM8

ZEA100

ZEA102

ZEA104

ZEA106

ZEA107

ZEA108

ZEA109

ZEA110

ZGA501

ZSA301

ZSA304

ZT605

ZTA601

ZTA605

ZUA400

ZUA401

ZWA200

ZWA200

ZWA202

ZWA203

ZWA205

ZWA207

ZWA209

ZWA214

ZWA215

ZZ704

ZZA701

ZZA702

315010

315025

315020

315035

315030

315036

315037

315140

315150

315160

315170

190330

583860

179850

160930

160920

387500

387520

387540

387560

387570

387580

387590

387450

388270

387740

388110

388080

387700

387190

387750

387760

313330

387600

387620

387630

387650

387670

387690

387890

387900

313870

388400

387720

149

149

149

149

149

149

149

184

184

184

184

102

166

102

112

112

153

153

154

154

154

155

155

153

160

158

160

150

151

150

159

159

156

156

156

156

157

157

157

159

160

152

161

158


INDEX


240

Part No. Description Page

129325

129326

129327

129328

129329

129330

129331

129332

129333

129334

129335

129336

129337

129338

129339

129340

129341

129342

129343

159441

159442

160000

160010

160020

160030

160040

160050

160060

160070

160120

160130

160140

160180

160200

160220

160230

160240

160250

160260

160280

160330

160340

160360

160370

160380

160390

160920

160930

170010

170020

170030

170040

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

30,44

111

111

97

97

97

97

99

99

99

99

101

101

101

105

105

104

104

108

110

116

116

113

113

113

113

113

113

112

112

94

94

94

94

100

100

100

94

96

96

96

96

96

96

96

94

96

193

193

193

103

104

100

115

115

115

115

115

116

116

116

109

101

95

95

103

95

107

101

98

98

101

98

100

101

101

101

98

98

100

117

117

101

101

105

105

CADDY® EZ RISER #510 Riser Clamp 1/2" EG 5100050EG

CADDY EZ RISER #510 Riser Clamp 3/4" EG 5100075EG

CADDY EZ RISER #510 Riser Clamp 1" EG 5100100EG

CADDY EZ RISER #510 Riser Clamp 1-1/4" EG 5100125EG

CADDY EZ RISER #510 Riser Clamp 1-1/2" EG 5100150EG


CADDY EZ RISER #510 Riser Clamp 2-1/2" EG 5100250EGAU



CADDY EZ RISER #510 Riser Clamp 5" EG 5100500EGAU

CADDY EZ RISER #510 Riser Clamp 6" EG 5100600EGAU




#510 Riser Clamp 14" EG 5101400EG





Decking Hole Punch Tool TDHP MK2

Decking Hole Punch Tool Blade Set

Hammer On Threaded Rod Hanger TI04




Hammer On Finger Close Pipe Clamp 812M4SM




Hammer On Finger Close Pipe Clamp 812EM24



Beam Clamp with Finger Close Pipe Clamp EBC812MSM

Beam Clamp with Finger Close Pipe Clamp EBC812M

Hammer On C Purlin Rod Clip T10J1

Hammer On C Purlin Rod Clip T10J2

Purlin Rod Clip 122T10

Decking Clip with Rod Hanger EERT10

Rod Hanger T10

Ceiling Mounted Rod Hanger T10B

Decking Insert with Rod Hanger M8GTD12-17




Decking Insert with Rod Hanger 10GDT12-17

Decking Insert with Rod Hanger 10GTD17-22

Decking Insert WDCM8

Decking Insert WDCM10

Hammer On Beam Clamp 2H4




Hammer On Clip EM24

Hammer On Clip EM58

Hammer On Clip EM912

Hammer On Threaded Rod Hanger 4H24I

Hammer On BC with White Cable Tie 2H4CTBW




Hammer On BC with Black Cable Tie 2H4CTBB



Hammer On Threaded Rod Hanger 4H58I


SS Hammer On Beam Clamp with Strap 4H24CTBR-2



Hammer On C Purlin Clip J1

Beam Clamp EBC

Hammer On Clip with Stud EM24SM

Rod Mounted Tubing Support K8




Rod Mounted Tubing Support KX

Rod Hanger M8TI

Rod Hanger M10TI

Angle Bracket AB

Decking Clip EER


Hammer On Strap Clamp 4H24ST3


Hammer On C Purlin Clip J2


Purlin Clip 122


Hammer On Strap Hanger S58



Hammer On Strap Hanger SR24








Rod Clip 8MEBN

Rod Clip 10MEBN

Hammer On Pipe Clamp 8EP24




DescriptionPart No. Page

170050

170060

170070

170150

170170

170180

170190

170200

170210

170220

170240

170250

170260

170280

170300

170310

170370

170380

170530

170660

170670

170680

170690

170870

170900

170910

171120

171470

171490

171500

171530

171590

171640

171690

171740

171760

171770

171800

171810

171850

171950

171960

171970

172020

172030

172060

172130

172140

172150

172160

172590

172600



INDEX

Part No. Description Page DescriptionPart No. Page

172610

172620

172660

172670

172680

172690

172700

172710

172720

172950

172960

173080

173130

173140

173180

173190

173270

173280

173290

173300

173310

173320

173330

173340

173360

173370

173390

173400

173420

173440

173450

173570

173580

173590

173600

173610

173620

174340

174350

174460

174550

174690

174700

174800

174810

174820

174830

174840

174900

174910

174920

174930

105

105

105

105

105

105

106

106

106

114

114

109

110

110

110

110

97

97

97

97

97

97

97

97

103

103

103

103

95

117

117

101

101

101

101

101

101

147

147

147

147

107

107

116

97

97

97

97

97

97

97

97

116

104

104

108

97

97

97

97

116

104

104

108

101

99

99

99

99

98

98

98

113

114

114

114

29,41

29,41

29,41

29,41

29,41

29,41

29,41

29,41

29,41

29,41

29,41

29,41

95

95

95

95

42

42

42

42

42

42

42

42

42

42

42

42







Beam Clamp with Pipe Clamp EBC8P



Rod Mounted Cable Tray Support 4Z34CTS

Rod Mounted Cable Tray Support 6Z34CTS

Decking Clip with Strap Hanger EERS

Decking Clip with Rod Hanger EERM8TI

Decking Clip with Rod Hanger EERM10TI

Decking Clip with Rod Hanger EERM8MA

Decking Clip with Rod Hanger EERM10MA

Hammer On Rod Hanger M8MA4








Hammer On C Purlin Rod Clip M8MAJ1





Ceiling Mounted Rod Hanger M8MAB

Ceiling Mounted Rod Hanger M10MAB







CADDY® SLICK M8 Threaded Strut Nut

CADDY SLICK M10 Threaded Strut Nut



Purlin Rod Clip 122M8MA

Purlin Rod Clip 122M10MA

Rod Hanger M6TI

Hammer On Threaded Rod Hanger M6TI4








Ceiling Mounted Rod Hanger M8TIB

Hammer On C Purlin Rod Clip M8TIJ1


Purlin Rod Clip 122M8TI





Ceiling Mounted Rod Hanger M10TIB



Purlin Rod Clip 122M10TI


Hammer On Pipe Clamp 12P4SM







Purlin Clip PW2

Purlin Rod Clip PW2M8TIIN

Purlin Rod Clip PW2M10TIIN

Purlin Rod Clip PW2T10TIIN

CADDY® SLOT LOCK #427 Clevis Hanger 1/2" EG 4270050EG

CADDY SLOT LOCK #427 Clevis Hanger 3/4" EG 4270075EG

CADDY SLOT LOCK #427 Clevis Hanger 1" EG 4270100EG

CADDY SLOT LOCK #427 Clevis Hanger 1-1/4" EG 4270125EG

CADDY SLOT LOCK #427 Clevis Hanger 1-1/2" EG 4270150EG


CADDY SLOT LOCK #427 Clevis Hanger 2-1/2" EG 4270250EGAU






Hammer On BC for Cable Ties 2H4CT




#402 Copper Clevis Hanger 1/2" CP 4020050CP

#402 Copper Clevis Hanger 3/4" CP 4020075CP

#402 Copper Clevis Hanger 1" CP 4020100CP

#402 Copper Clevis Hanger 1-1/4" CP 4020125CP









174940

174960

174970

174980

174990

175000

175010

175020

175030

175050

175060

175070

175100

175210

175220

175230

175240

175480

175540

175550

175590

175610

175620

175630

178300

178301

178302

178303

178304

178305

178306

178307

178308

178309

178310

178311

178510

178520

178530

178540

179312

179313

179314

179315

179316

179317

179318

179319

179320

179321

179322

179323


INDEX


242


179324

179344

179345

179346

179347

179348

179349

179350

179351

179352

179353

179354

179355

179356

179357

179358

179359

179360

179361

179362

179363

179364

179365

179366

179398

179399

179420

179421

179422

179423

179424

179425

179426

179427

179428

179429

179430

179431

179432

179433

179434

179435

179436

179510

170020

170030

170040

179650

179660

179670

179690

179700

42

45

45

45

45

45

45

45

45

45

45

45

46

46

46

46

46

46

46

46

46

46

46

46

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

28,40

111

94

94

94

194

194

194

194

194

194

194

194

194

195

195

195

195

195

195

102

111

111

111

111

111

111

131

131

130

130

130

130

130

130

132

132

132

132

132

132

132

132

132

132

179

179

179

179

112

112

112

165

165

165

112

112

112

112

102

146

146


CADDY® EZ RISER #511 Copper Riser Clamp 1/2" CP 5110050CPAU

CADDY EZ RISER #511 Copper Riser Clamp 3/4" CP 5110075CPAU

CADDY EZ RISER #511 Copper Riser Clamp 1" CP 5110100CPAU

CADDY EZ RISER #511 Copper Riser Clamp 1-1/4" CP 5110125CPAU








#700 Offset Pipe Clamp 1/2" PL 7000050PL

#700 Offset Pipe Clamp 3/4" PL 7000075PL

#700 Offset Pipe Clamp 1" PL 7000100PL

#700 Offset Pipe Clamp 1-1/4" PL 7000125PL

#700 Offset Pipe Clamp 1-1/2" PL 7000150PL


#700 Offset Pipe Clamp 2-1/2" PL 7000250PLAU



#700 Offset Pipe Clamp 5" PL 7000500PLAU

#700 Offset Pipe Clamp 6" PL 7000600PLAU


#401 Clevis Hanger 1/2" EG 4010050EG

#401 Clevis Hanger 3/4" EG 4010075EG

#401 Clevis Hanger 1" EG 4010100EG

#401 Clevis Hanger 1-1/4" EG 4010125EG

#401 Clevis Hanger 1-1/2" EG 4010150EG


#401 Clevis Hanger 2-1/2" EG 4010250EGAU













Decking Hanger TDHIM8

SS Hammer On Beam Clamp 4H24



SS Hammer On Finger Close Pipe Clamp 8M24SM-2






SS Hammer On Clip EM24-2



SS Hammer On Finger Close Pipe Clamp 8EM24-2






Hammer On Clip VF14

Decking Hanger TDH

Decking Hanger TDHM6


Decking Hanger TDHAM8


Decking Hanger TDHAM10

CADDY® PYRAMID 25 PPRPS25H4

CADDY PYRAMID 25 PPRPS25H6

CADDY® PYRAMID 50 RPS50H4EG

CADDY PYRAMID 50 RPS50H6EG

CADDY PYRAMID 50 RPS50H4HD

CADDY PYRAMID 50 RPS50H6HD

CADDY PYRAMID 50 RPS50H4MCP

CADDY PYRAMID 50 RPS50H6MCP

CADDY® PYRAMID 150 RPS150T3 EG

CADDY PYRAMID 150 RPS150T4 MCP

CADDY® PYRAMID 300 RPS300T3 MCP

CADDY PYRAMID 300 RPS300T4 MCP

CADDY® PYRAMID 600 RPS600T4 MCP

CADDY® PYRAMID 150 RPS150T7

CADDY PYRAMID 150 RPS150T8

CADDY® PYRAMID 300 RPS300T7



Adjustable screw gun bracket TSGB16

Adjustable screw gun bracket TSGB24

Tube & pipe clamp TPC112

Tube & pipe clamp TPC238

Wedge Nut for Holorib Decking HW8



CADDY® ISN Nut M6

CADDY ISN Nut M8

CADDY ISN Nut M10

Wedge Nut for Holorib Decking HW6M

Wedge Nut for Holorib Decking HW8M

Wedge Nut for Holorib Decking PHW6

Wedge Nut for Holorib Decking PHW8

Installation Tool, VF Clips VAFT

CADDY® ISSP Plate

CADDY ISSP Plate M6


179710

179720

179730

179740

179780

179790

179800

179810

179820

179830

179850

179920

179930

179940

179945

179950

179955

182450

182460

182470

182480

182500

182510

182515

182520

182580

182590

182620

182630

182650

182680

182690

182700

182710

182720

187190

187191

187192

187193

187280

187290

187300

187340

187350

187360

188740

188780

188840

188850

190330

190800

190810



INDEX


190820

190830

195800

195805

195810

195815

195820

195825

195830

195835

195840

195845

195851

195852

195853

195854

195856

195858

195859

195920

195925

195930

195950

195955

310221

310265

310326

313301

313305

313310

313330

313870

314995

315000

315010

315015

315020

315025

315030

315035

315036

315037

315040

315045

315050

315055

315060

315065

315070

315075

315080

146

146

120

120

120

120

120

120

120

120

120

120

122

122

122

123

123

123

123

121

121

121

121

121

144

144

144

140

151

151

156

152

149

149

149

149

149

149

149

149

149

149

150

150

150

150

150

150

150

150

149

149

149

149

149

149

149

149

184

184

184

184

184

184

184

184

139

139

139

90

90

169

152

152

169

169

150

153

153

153

154

154

154

155

155

156

156

156

157

157

157

151

158

158

159

159

159

160

160

160

161

89

84

CADDY® ISSP Plate M8

CADDY ISSP Plate M10

CADDY® SPEED LINK SL2/1

CADDY SPEED LINK SL2/2









CADDY SPEED LINK Air Duct Corner Protector SLADCP

CADDY SPEED LINK Screw-on Air Duct Angle Support SLADS

CADDY SPEED LINK Wire Cutter SLWC

CADDY SPEED LINK Eyebolt M6 x 30 SLESM6x30

CADDY SPEED LINK Eyebolt M8 x 40 SLESM8x40

CADDY SPEED LINK Eyebolt H6 x 40 SLESH6x40

CADDY SPEED LINK Wire Insulation Protection Tube SLWPT

CADDY SPEED LINK SLD15L2





CADDY® ERISTRUT, AAC 41 X 41mm Back to Back HDG (3M)

CADDY ERISTRUT, AC-2 41 X 21 X 2.5mm Slotted 316SS (6M)

CADDY ERISTRUT, AC-2 41 X 41 X 2.5mm Slotted 316SS (6M)

ADK End Cap for EOL C-Channels and Cantilever

ADK421 Strut End Caps

DLP Plastic Strut Capping

ZWA200 2-hole Angle Bracket With bolts

ZZ704 Window Bracket

Strut Nut, UM 506 EG

Strut Nut, UM 506 P3

Strut Nut,UM 608 P3

Strut Nut,UM 608 EG

Strut Nut,UM 810 P3

Strut Nut,UM 810 EG

Strut Nut,UM 812 P3

Strut Nut,UM 812 EG

Strut Nut,UM 816 EG

Strut Nut,UM 816 P3

Strut Nut, UD 506 P3

Strut Nut, UD 506 EG







Strut Nut, UA 506 P3

UA 506 ERISTRUT Channel Nut with Spring M6 EG







UA810-2, Stainless Steel strut nuts

UM506-2, Stainless Steel strut nuts







ECN CHANNEL NUT EOL/EO M8



Beam Clamp EG HB2

Beam Clamp EG HB2

Purlin Clip D1

Strut Mounting Clamp INC8

INC8 Strut Mounting Clamps

Purlin Clip D2

Purlin Clip D3

ZTA605 Beam Clamp Internal

ZEA110 Wide Tee Plate

ZEA100 Square Washer

ZEA102 2-hole Flat Plate

ZEA104 4-hole Flat Plate

ZEA106 3-hole Adjustable Flat Plate

ZEA107 Flat Right Angle Bracket

ZEA108 Tee Bracket

ZEA109 Cross Plate

ZWA200 2-hole Angle Bracket





ZWA209 Wide Tee 4-hole Angle Bracket

ZTA601 Strut to Beam Clamp

ZZA702 Traverse Support Bracket

ZSA301 Single Cross Over Bracket 41 x 41 mm

ZUA400 Offset Tee Bracket 41 x 41 mm

ZUA401 Offset Tee Bracket41 x 21 mm

ZWA214 Offset Angle Bracket Left

ZWA215 Offset Angle Bracket Right

ZSA304 Corner Angle Bracket

ZGA501 Single Base Plate

ZZA701 Traverse Corner Bracket

Beam Clamp BTK310-M12


315085

315090

315095

315100

315105

315110

315115

315120

315140

315150

315160

315170

315180

315190

315200

315340

315350

315370

336030

336040

336280

336290

336290

339100

339110

388080

387450

387500

387520

387540

387560

387570

387580

387590

387600

387620

387630

387650

387670

387690

387700

387720

387740

387750

387760

387890

387900

388110

388270

388400

388890

389001


INDEX


244


389002

389003

389004

389005

389006

389007

389008

389009

389011

389012

389013

389014

389046

389047

389048

389049

389053

389054

389055

389056

389057

389058

389059

389061

389062

389063

389064

389065

389066

389067

389068

389500

389510

389890

400063

400064

400065

400066

400067

400068

400069

400070

400071

400072

400073

400074

400075

400076

400077

577002

577003

577004

84

84

84

84

84

84

84

84

84

84

84

84

85

85

85

85

85

85

85

85

86

86

86

86

86

86

86

86

86

86

86

88

88

89

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

22,27

22,27

22,27

22,27

22,27

22,27

22,27

22,27

22,27

22,27

22,27

22,27

22,27

5

5

5

5

5

5

5

5

5

5

5

5

5

165

165

204

206

208

210

204

207

209

211

78

78

78

78

78

78

78

78

78

78

78

78

78

78

166

138

138

138

138













TSM0037

TSM0050

TSM0062

TSM0075

TSM0087

TSM0112

TSM0137

TSM0162

TSMI0062

TSMI0075

TSMI0087

TSMI0100

TSMI0112

TSMI0125

TSMI0137

TSMI0150

TSMI0162

TSMI0200

TSMI0212

Beam Clamp TK300-9mm

Beam Clamp TK300-11mm

Beam Clamp BTK310-M10

CADDY® SUPERFIX 243 12-14mm















HDPC 20-24 mm

HDPC 25-30 mm

HDPC 31-35 mm

HDPC 40-45 mm

HDPC 48-53 mm

HDPC 60-65 mm

HDPC 76-81 mm

HDPC 88-94 mm

HDPC 110-116 mm

HDPC 140-146 mm

HDPC 159-165 mm

HDPC 219-226 mm

HDPC 267-273 mm

HDPCI 19-23 mm

HDPCI 24-28 mm

HDPCI 33-37 mm

HDPCI 40-45 mm

HDPCI 47-52 mm

HDPCI 60-65 mm

HDPCI 73-78 mm

HDPCI 88-93 mm

HDPCI 108-116 mm

HDPCI 138-145 mm

HDPCI 165-171 mm

HDPCI 219-225 mm

HDPCI 265-273 mm

Sound Reduction Rubber IHT 20mm

Sound Reduction Rubber IHT 25mm

Pipe Expansion Slide PESMO

Pipe Expansion Slide PESMOS

Pipe Expansion Slide PESMT

Pipe Expansion Slide PESMTS

Pipe Expansion Slide PESHO

Pipe Expansion Slide PESHOS

Pipe Expansion Slide PESHT

Pipe Expansion Slide PESHTS

MACRO V ISO 200 M8/10 Circular Duct Clamp














Dual Sided Screw VDF M10 x 45

C-Fix Channel Nut M6



C-Fix Channel Nut with Stud M8 X 30 mm


577006

577007

577009

577011

577013

577016

577020

577022

577028

577032

577034

577035

577037

577038

577039

577041

577043

577045

577048

577052

577055

577061

577066

578680

578690

580560

580561

580562

580563

580564

580565

580566

580567

582450

582470

582480

582490

582500

582510

582530

582540

582550

582560

582580

582590

582600

582810

583860

584500

584510

584520

584530



INDEX


584560

588430

588440

588500

588560

588570

588580

588610

588620

595870

589980

589990

590076

590077

590080

590090

593180

593190

593200

595035

595036

595037

595038

595039

595040

595041

595042

595043

595044

595045

595046

595047

595048

595400

595410

595420

595430

595440

595450

595470

595475

595480

595490

595500

595505

595510

595520

595530

595535

595540

595550

595555

138

126

126

126

127

127

127

127

127

3

128

128

139

139

166

166

166

166

166

4

4

4

4

4

4

4

4

4

4

4

4

4

4

189

189

189

189

189

189

189

189

189

189

189

189

189

189

189

189

189

189

189

189

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

190

3

3

3

3

3

3

3

3

3

3

3

3

3

3

9

9

9

9

9

9

9

9

9

9

9

9

C-Fix Channel Nut with Stud M10 X 40 mm

Sound Insulator female/female SBFF 6-6

Sound Insulator female/female SBFF 8-8

Sound Insulator Heavy Duty SGBC

Sound Insulator male/female SBMF 8-8



Sound Insulator female/female SBMK

Sound Insulator male/female SBFK


KIT U Silent 450

KIT U Silent 600

KP T-BOLTS Premounted Stud Washer and nut M8 X 30 mm

KP T-BOLTS Premounted Stud Washer and nut M8 X 40 mm

Pre Mounted Nut TMN M8 x 30

Pre Mounted Nut TMN M10 x 40

Drop In Anchor CA6

Drop In Anchor CA8

Drop In Anchor CA10

CADDY® MACROFIX 240LF 14-19mm




















































































595560

595595

595600

595610

595620

595630

595640

595650

595660

595670

595675

595680

595690

595695

595700

595710

595720

595730

595740

595750

595755

595760

595770

595775

595780

595860

595870

595880

595885

595890

595900

595910

595920

595930

595940

595950

595955

595960

595970

596220

596230

596250

596260

596270

596280

596290

596300

596310

596320

596360

596380


INDEX


246


596410

596450

596460

596470

596480

596490

596500

596510

597590

597770

597780

597790

597790

597791

597792

597811

597812

597813

597814

597815

597816

597817

597818

597819

597821

597822

597823

597824

597825

597826

597827

597828

597829

597831

597832

597860

597870

597880

597890

597900

597910

597920

597930

597940

597950

597960

597970

598501

598502

599879

599880

599996

9

3

3

3

3

3

3

3

79

79

80

80

81

80

80

37

37

37

37

37

34

34

34

34

34

35

35

35

35

35

36

36

36

36

36

25

25

25

25

25

25

25

25

25

25

25

25

89

89

137

137

136

191

191

191

191

191

191

191

191

191

191

191

191

25

25

25

25

25

25

25

25

25

25

25

25

192

192

192

192

192

192

192

192

192

192

192

192

192

192

192

192

192

192

202

202

202

202

202

202

202

202

202

202

CADDY® MACROFIX 250 NI 159-168mm








Duct Fixing V-Shape EQV

Duct Fixing V-Shape EQVS

Duct Fixing Bracket L-Shape EQLS85

Duct Fixing Bracket Z-Shape EQZS

Duct Fixing Bracket Z-Shape EQ-ZAB



Stand-Off 2-Hole Strap CPVC 20nb SO12A





#107 Wrap Around Strap CPVC 20nb 1070075EG





#108 Two-Hole Strap CPVC 20nb 1080075EG





#109 Side Mount Strap CPVC 20nb 1090075EG





#115M Loop 15mm EG 115M0050EG












Beam Clamp BTK310-11mm

Beam Clamp BTK310-13mm

EOL Cantileaver Light Duty 180 mm

EOL Cantileaver Light Duty 300 mm

EOL C Light duty Profile

#105 Stainless Steel Loop Hanger 15nb












#115 Loop 1/2" EG

#115 Loop 3/4" EG

#115 Loop 1" EG

#115 Loop 1-1/4" EG

#115 Loop 1-1/2" EG

#115 Loop 2" EG

#115 Loop 2-1/2" EG

#115 Loop 3" EG

#115 Loop 4" EG

#115 Loop 5" EG

#115 Loop 6" EG

#115 Loop 8" EG

#406 Clevis Hanger 15nb 304 SS


















#610 One Rod Roller 65nb PL











1050050S4

1050075S4

1050100S4

1050125S4

1050150S4

1050200S4

1050250S4

1050300S4

1050400S4

1050500S4

1050600S4

1050800S4

1150050EG

1150075EG

1150100EG

1150125EG

1150150EG

1150200EG

1150250EG

1150300EG

1150400EG

1150500EG

1150600EG

1150800EG

4060050S4

4060075S4

4060100S4

4060125S4

4060150S4

4060200S4

4060250S4

4060300S4

4060400S4

4060500S4

4060600S4

4060800S4

4061000S4

4061200S4

4061600S4

4061800S4

4062000S4

4062400S4

6100250PL

6100300PL

6100400PL

6100500PL

6100600PL

6100800PL

6101000PL

6101200PL

6101400PL

6101600PL



INDEX


6101800PL

6102000PL

6102400PL

6150250PL

6150300PL

6150400PL

6150500PL

6150600PL

6150800PL

6151000PL

6151200PL

6151400PL

6151600PL

6151800PL

6152000PL

6152400PL

AB1111

AB711

AB77

AB97

ADJ-015-GWIR-HDG

ADJ-015-PPVC-PPC

ADJ-020-CU-HDG

ADJ-020-CU-PPC

ADJ-020-GWIR-HDG

ADJ-025-CU-HDG

ADJ-025-CU-PPC

ADJ-025-GWIR-HDG

ADJ-025-PPVC-PPC

ADJ-032-CU-HDG

ADJ-032-CU-PPC

ADJ-032-GWIR-HDG

ADJ-032-PPVC-PPC

ADJ-040-CU-HDG

ADJ-040-CU-PPC

ADJ-040-GWIR-HDG

ADJ-040-PVC-HDG

ADJ-040-PVC-PPC

ADJ-050-CU-HDG

ADJ-050-CU-PPC

ADJ-050-GWIR-HDG

ADJ-050-PPVC-PPC

ADJ-050-PVC-HDG

ADJ-050-PVC-PPC

ADJ-065-CU-HDG

ADJ-065-CU-PPC

ADJ-065-GWIR-HDG

ADJ-065-PVC-HDG

ADJ-065-PVC-PPC

ADJ-080-CU-HDG

ADJ-080-CU-PPC

ADJ-080-GWIR-HDG

202

202

202

203

203

203

203

203

203

203

203

203

203

203

203

203

167

167

167

167

10

10

11

11

10

11

11

10

10

11

11

10

10

11

11

10

12

12

11

11

10

10

12

12

11

11

10

12

12

11

11

10

10

12

12

12

11

11

10

10

12

12

11

11

10

11

11

10

12

12

11

12

12

11

11

12

12

178

167

167

167

167

167

167

167

167

64

64

64

64

64

64

64

64

64

31

31

31

31

50

50

50

185

51




#615 Roller Chair 65nb PL













Angle bracket 11-11

Angle bracket 7-11

Angle bracket 7-7

Angle bracket 7-9

Adjustable Clamp, 15 Steel HDG

Adjustable Clamp, 15 Pressure PVC PPC

Adjustable Clamp, 20 Copper HDG

Adjustable Clamp, 20 Copper PPC













Adjustable Clamp, 40 PVC HDG

Adjustable Clamp, 40 PVC PPC








































Adjustable Nogging Bracket

Bolt, M10x20 HDG

Bolt, M10x30 HDG

Bolt, M10x40 HDG

Bolt, M6x25 HDG

Bolt, M8x20 HDG

Bolt, M8x25 HDG

Bolt, M8x30 HDG

Bolt, M8x40 HDG

Bracket Clip, 15 Copper PPC









Deep Saddle, Steel 25nb EG




Channel Clip, 15 Copper GAL

Channel Clip, 15 Copper HDG

Channel Clip, 15 Copper PPC

Channel Clip, 15 Copper/SS Tube 316 SS

Channel Clip, 15 Steel GAL

ADJ-080-PPVC-PPC

ADJ-080-PVC-HDG

ADJ-080-PVC-PPC

ADJ-090-PVC-HDG

ADJ-100-CU-HDG

ADJ-100-CU-PPC

ADJ-100-GWIR-HDG

ADJ-100-PPVC-PPC

ADJ-100-PVC-HDG

ADJ-100-PVC-PPC

ADJ-125-CU-HDG

ADJ-125-CU-PPC

ADJ-125-GWIR-HDG

ADJ-150-CU-HDG

ADJ-150-CU-PPC

ADJ-150-GWIR-HDG

ADJ-150-PVC-HDG

ADJ-150-PVC-PPC

ADJ-200-CU-HDG

ADJ-225-PVC-HDG

ADJ-225-PVC-PPC

ADJ-250-CU-HDG

ADJ-300-CU-HDG

ADJ-300-PVC-HDG

ADJ-300-PVC-PPC

Barrnog

BOL-M1020-HDG

BOL-M1030-HDG

BOL-M1040-HDG

BOL-M625-HDG

BOL-M820-HDG

BOL-M825-HDG

BOL-M830-HDG

BOL-M840-HDG

BRC-015-CU-PPC

BRC-020-CU-PPC

BRC-025-CU-PPC

BRC-032-CU-PPC

BRC-040-CU-PPC

BRC-050-CU-PPC

BRC-065-CU-PPC

BRC-080-CU-PPC

BRC-100-CU-PPC

CDS 25

CDS 32

CDS 40

CDS 50

CHC-015-CU-GAL

CHC-015-CU-HDG

CHC-015-CU-PPC

CHC-015-CU-SS

CHC-015-GWIR-GAL


INDEX


248


CHC-015-GWIR-HDG

CHC-015-PPVC-PPC

CHC-016-CU-GAL

CHC-016-CU-HDG

CHC-020-CU-GAL

CHC-020-CU-HDG

CHC-020-CU-PPC

CHC-020-CU-SS

CHC-020-GWIR-GAL

CHC-020-GWIR-HDG

CHC-020-PPVC-PPC

CHC-023-CU-GAL

CHC-025-CU-GAL

CHC-025-CU-HDG

CHC-025-CU-PPC

CHC-025-CU-SS

CHC-025-GWIR-GAL

CHC-025-GWIR-HDG

CHC-025-PPVC-PPC

CHC-029-CU-GAL

CHC-029-CU-HDG

CHC-032-CU-GAL

CHC-032-CU-HDG

CHC-032-CU-PPC

CHC-032-CU-SS

CHC-032-GWIR-GAL

CHC-032-GWIR-HDG

CHC-032-PPVC-PPC

CHC-035-CU-GAL

CHC-040-CU-GAL

CHC-040-CU-HDG

CHC-040-CU-PPC

CHC-040-CU-SS

CHC-040-GWIR-GAL

CHC-040-GWIR-HDG

CHC-040-PPVC-PPC

CHC-040-PVC-GAL

CHC-040-PVC-HDG

CHC-040-PVC-PPC

CHC-040-PVC-SS

CHC-050-CU-GAL

CHC-050-CU-HDG

CHC-050-CU-PPC

CHC-050-CU-SS

CHC-050-GWIR-GAL

CHC-050-GWIR-HDG

CHC-050-PPVC-PPC

CHC-050-PVC-GAL

CHC-050-PVC-HDG

CHC-050-PVC-PPC

CHC-050-PVC-SS

CHC-065-CU-GAL

51

53

50

50

50

50

50

185

51

51

53

50

50

50

50

185

51

51

53

50

50

50

50

50

185

51

51

53

50

50

50

50

185

51

51

53

52

52

52

186

50

50

50

185

51

51

53

52

52

52

186

50

50

50

185

51

51

53

52

52

52

186

50

50

50

185

51

51

53

52

52

52

186

52

52

52

186

50

50

50

185

51

51

53

52

52

52

186

50

50

50

185

51

51

50

50

50

185

51

51

52

52

52

186

Channel Clip, 15 Steel HDG

Channel Clip, 15 Pressure PVC PPC



































Channel Clip, 40 PVC GAL

Channel Clip, 40 PVC HDG

Channel Clip, 40 PVC PPC

Channel Clip, 40 PVC 316 SS


































































CHC-065-CU-HDG

CHC-065-CU-PPC

CHC-065-CU-SS

CHC-065-GWIR-GAL

CHC-065-GWIR-HDG

CHC-065-PPVC-PPC

CHC-065-PVC-GAL

CHC-065-PVC-HDG

CHC-065-PVC-PPC

CHC-065-PVC-SS

CHC-080-CU-GAL

CHC-080-CU-HDG

CHC-080-CU-PPC

CHC-080-CU-SS

CHC-080-GWIR-GAL

CHC-080-GWIR-HDG

CHC-080-PPVC-PPC

CHC-080-PVC-GAL

CHC-080-PVC-HDG

CHC-080-PVC-PPC

CHC-080-PVC-SS

CHC-090-PVC-GAL

CHC-090-PVC-HDG

CHC-090-PVC-PPC

CHC-090-PVC-SS

CHC-100-CU-GAL

CHC-100-CU-HDG

CHC-100-CU-PPC

CHC-100-CU-SS

CHC-100-GWIR-GAL

CHC-100-GWIR-HDG

CHC-100-PPVC-PPC

CHC-100-PVC-GAL

CHC-100-PVC-HDG

CHC-100-PVC-PPC

CHC-100-PVC-SS

CHC-125-CU-GAL

CHC-125-CU-HDG

CHC-125-CU-PPC

CHC-125-CU-SS

CHC-125-GWIR-GAL

CHC-125-GWIR-HDG

CHC-150-CU-GAL

CHC-150-CU-HDG

CHC-150-CU-PPC

CHC-150-CU-SS

CHC-150-GWIR-GAL

CHC-150-GWIR-HDG

CHC-150-PVC-GAL

CHC-150-PVC-HDG

CHC-150-PVC-PPC

CHC-150-PVC-SS



INDEX


CHC-200-CU-GAL

CHC-200-CU-HDG

CHC-200-CU-PPC

CHC-200-CU-SS

CHC-200-GWIR-GAL

CHC-200-GWIR-HDG

CHC-200-PPVC-GAL

CHC-225-CU-GAL

CHC-225-CU-HDG

CHC-225-PVC-GAL

CHC-225-PVC-HDG

CHC-225-PVC-PPC

CHC-225-PVC-SS

CHC-250-CU-GAL

CHC-250-CU-HDG

CHC-250-GWIR-GAL

CHC-250-GWIR-HDG

CHC-250-PPVC-GAL

CHC-300-CU-GAL

CHC-300-CU-HDG

CHC-300-PVC-GAL

CHC-300-PVC-HDG

CHC-300-PVC-PPC

CHC-375-PVC-GAL

CHC-375-PVC-HDG

CHC-375-PVC-PPC

CLS 25

CLS 32

CLS 40

CLS 50

CLS 65

CMP10

CMP12

CMP8

CNC 100

CNC 100 M12

CNC 125

CNC 125 M12

CNC 150

CNC 150 M12

CNC 20

CNC 25

CNC 32

CNC 40

CNC 50

CNC 65

CNC 65 M12

CNC 80

CNC 80 M12

COU-M10-ZP

COU-M12-ZP

COU-M16-ZP

50

50

50

185

51

51

53

50

50

52

52

52

186

50

50

51

51

53

50

50

52

52

52

52

52

52

31

31

31

31

31

168

168

168

26

26

26

26

26

26

26

26

26

26

26

26

26

26

26

168

168

168

168

168

32

32

32

32

32

65

65

66

66

66

66

66

66

66

66

66

66

65

65

65

65

65

65

65

169

169

169

170

170

170

145

145

146

146

146

146

24

24

24

24

24

24

24

24

24

24

170

170

171

171



























Shallow Saddle, Steel 25nb EG





CADDY Mounting Plate, M10



Nut Clip, Steel 100nb EG

Nut Clip, Steel 100nb M12 EG














Threaded Rod Coupler, M10 EG





Twist Clip, Steel 25nb EG





Half Saddle Clip, 15 Copper PPC

Half Saddle Clip, 20 Copper PPC

Copper Saddle, 6mm PPC










Solid Copper Saddle, 6mm







D1 Purlin Clip, M10 rod



E2 Purlin Clip, M10

E2 Purlin Clip, M12

E2 Purlin Clip, M8

ERICO Slotted Angle, 30mm x 30mm EG

ERICO Slotted Angle, 50mm x 50mm EG

Braced Cantilever Arms, 320mm




Pear Bands, Steel, 100nb EG










ERICO Rod Connector, adj, M10

ERICO Rod Connector, M10

ERIC Clevis, M10

ERIC Clevis, M12

COU-M20-ZP

COU-M8-ZP

CTC 25

CTC 32

CTC 40

CTC 50

CTC 65

CU-HF-015-PPC

CU-HF-020-PPC

CUS-006-CU-PPC

CUS-008-CU-PPC

CUS-010-CU-PPC

CUS-012-CU-PPC

CUS-016-CU-PPC

CUS-020-CU-PPC

CUS-025-CU-PPC

CUS-032-CU-PPC

CUS-040-CU-PPC

CUS-050-CU-PPC

CU-SAD-006

CU-SAD-008

CU-SAD-010

CU-SAD-015

CU-SAD-016

CU-SAD-020

CU-SAD-025

D1M10

D1M12

D1M8

E210

E212

E28

EA3030

EA5050

ECB150

ECB300

ECB450

ECB600

EPB 114

EPB 165

EPB 220

EPB 27

EPB 34

EPB 43

EPB 48

EPB 60

EPB 76

EPB 89

ERC02510

ERC1010

ERIC 10

ERIC 12


INDEX


250


ERIC 16

ERIC 8

ERIC1-34

ERIC1-43

ERIC1-48

ERIC15 - 114

ERIC15 - 165

ERIC15 - 219

ERIC15 - 60

ERIC15 - 76

ERIC15 - 89

ERIC16 - 102

ERIC16 - 114

ERIC16 - 127

ERIC16 - 140

ERIC16 - 152

ERIC16 - 165

ERIC16 - 220

ERIC16 - 273

ERIC16 - 324

ERIC16 - 60

ERIC16 - 76

ERIC16 - 89

ERIC18 - 114

ERIC18 - 127

ERIC18 - 152

ERIC18 - 165

ERIC18 - 219

ERIC18 - 273

ERIC18 - 60

ERIC18 - 76

ERIC18 - 89

ERIC30 - 168

ERIC30 - 219

ERIC30 - 273

ERIC30 - 324

ERIC30 - 356

ERIC30 - 406

ERIC30 - 457

ERIC30 - 508

ERIC31 - 168

ERIC31 - 219

ERIC31 - 273

ERIC31 - 324

ERIC31 - 356

ERIC31 - 406

ERIC31 - 457

ERIC31 - 508

ERIC31 - 610

ES1000

ES1000T

ES3300

171

171

32

32

32

56

56

56

56

56

56

57

57

57

57

57

57

57

57

57

57

57

57

58

58

58

58

58

58

58

58

58

60

60

60

60

60

60

60

60

61

61

61

61

61

61

61

61

61

159

144

144

144

144

144

144

144

171

171

177

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

172

67

67

ERIC Clevis, M16

ERIC Clevis, M8

ERIC1 Saddle, 25 Steel EG



Medium Duty Saddle Clamp, Steel 100nb HDG






Medium Duty 2 pc Clamp, Copper 100mm HDG

Medium Duty 2 pc Clamp, Steel 100nb HDG











Adjustable Clamp, Steel 100nb HDG

Adjustable Clamp, Copper 125mm HDG

Adjustable Clamp, Copper 150mm HDG







Heavy Duty Saddle Clamp, Steel 150mm HDG








Heavy Duty 2 pc Clamp, Steel 150mm HDG









CADDY® ERISTRUT, 41 X 41 X 2.5mm HDG (3M)

CADDY ERISTRUT, 41 X 41 X 2.5mm Slotted HDG (3M)

CADDY ERISTRUT, 41 X 21 X 2.5mm HDG (3M)






Strike Anchor, M8

Strike Anchor, M10

Metal Stud Anti-Rattle Grommet

Plywood Ferrule, 100 Copper 25mm Wall










































Flush Fitting Clip 40 PVC PPC



ES3300T

ES4121PLX6

ES4121SLOTX6

ES4141PLX6

ES4141SLOTX6

ESA0850

ESA1050

ESGP

FER-0100-25-PLY

FER-0100-38-PLY

FER-0100-50-PLY

FER-0125-25-PLY

FER-0125-50-PLY

FER-0150-25-PLY

FER-0150-38-PLY

FER-0150-50-PLY

FER-015-12-PLY

FER-015-25-PLY

FER-015-38-PLY

FER-015-50-PLY

FER-0200-25-PLY

FER-0200-38-PLY

FER-0200-50-PLY

FER-020-12-PLY

FER-020-25-PLY

FER-020-38-PLY

FER-020-50-PLY

FER-025-12-PLY

FER-025-25-PLY

FER-025-38-PLY

FER-025-50-PLY

FER-032-12-PLY

FER-032-25-PLY

FER-032-38-PLY

FER-040-12-PLY

FER-040-25-PLY

FER-040-38-PLY

FER-040-50-PLY

FER-050-12-PLY

FER-050-25-PLY

FER-050-38-PLY

FER-050-50-PLY

FER-065-12-PLY

FER-065-25-PLY

FER-065-38-PLY

FER-065-50-PLY

FER-080-12-PLY

FER-080-25-PLY

FER-080-38-PLY

FER-080-50-PLY

FFC-040-PVC-PPC

FFC-050-PVC-PPC



INDEX


FFC-065-PVC-PPC

FFC-075-PVC-PPC

FFC-080-PVC-PPC

FFC-090-PVC-PPC

FFC-100-PVC-PPC

HEX-M10-HDG

HEX-M10-SS

HEX-M10-ZP

HEX-M12-HDG

HEX-M12-SS

HEX-M12-ZP

HEX-M16-HDG

HEX-M16-SS

HEX-M16-ZP

HEX-M20-HDG

HEX-M20-SS

HEX-M20-ZP

HEX-M6-HDG

HEX-M6-SS

HEX-M6-ZP

HEX-M8-HDG

HEX-M8-SS

HEX-M8-ZP

HNG-040-PVC-PPC

HNG-050-PVC-PPC

HNG-065-PVC-PPC

HNG-080-PVC-PPC

HNG-090-PVC-PPC

HNG-100-PVC-PPC

HNG-150-PVC-PPC

HST-GAL-300

HST-GAL-600

KH10C

KH11C

KH12C

KH13C

KH14C

KH15C

KH16C

KH5C

KH6C

KH8C

KH9C

MSP20

NUT-015-CU-PPC

NUT-020-CU-PPC

NUT-025-CU-PPC

NUT-032-CU-PPC

NUT-040-CU-PPC

NUT-040-PVC-PPC

NUT-050-CU-PPC

NUT-050-PVC-PPC

67

67

67

67

67

173

173

173

173

173

173

173

173

173

173

173

173

173

173

173

173

173

173

69

69

69

69

69

69

69

70

70

145

145

145

145

145

145

145

145

145

145

145

178

13

13

13

13

13

14

13

14

13

14

13

14

14

13

14

13

13

14

161

162

14

14

14

14

14

14

14

14

48

48

48

48

48

48

48

48

48

174

174

174

174

174

174

174

174

174

174

174

174

162

162

198

198

198

198

200

201

174

174

15






Hex Nut, M10 HDG

Hex Nut, M10 316 SS

Hex Nut, M10 EG

Hex Nut, M12 HDG

Hex Nut, M12 316 SS

Hex Nut, M12 EG

Hex Nut, M16 HDG

Hex Nut, M16 316 SS

Hex Nut, M16 EG

Hex Nut, M20 HDG

Hex Nut, M20 316 SS

Hex Nut, M20 EG

Hex Nut, M6 HDG

Hex Nut, M6 316 SS

Hex Nut, M6 EG

Hex Nut, M8 HDG

Hex Nut, M8 316 SS

Hex Nut, M8 EG

Hanging Bracket 40 PVC PPC







Hanging Strap, 300mm EG

Hanging Strap, 600mm EG

KH Cantilever Arm, 150mm HDG











Metal Stud Punch

Nut Clip, 15 Copper PPC





Nut Clip, 40 PVC PPC













P11 Strut Post Bast

P13 Strut Post Base for Welded Strut

Pear Band, 40 PVC PPC








Strut Clamp for Rigid Pipe 15mm









Threaded Rod, M10 x 3m HDG

Threaded Rod, M10 x 3m EG











ROL10 Strut Trolley

ROL11 Double Strut Trolley

ROL12 25nb to 100nb pipe

ROLLER,SINGLE,3-1/8 -100nb pipe



ROLLER,SINGLE, 150nb to 400nb pipe

ROLLER,SINGLE,400nb to 620nb pipe,E-GAL

Rubber Insulation, Flat

Rubber Insulation, for Strut Lip

Saddle, 15 Copper PPC

NUT-065-CU-PPC

NUT-065-PVC-PPC

NUT-080-CU-PPC

NUT-080-PVC-PPC

NUT-090-PVC-PPC

NUT-100-CU-PPC

NUT-100-PVC-PPC

NUT-125-CU-PPC

NUT-150-CU-PPC

NUT-150-PVC-PPC

P110000HD

P130000HD

PNG-040-PVC-PPC

PNG-050-PVC-PPC

PNG-065-PVC-PPC

PNG-080-PVC-PPC

PNG-100-PVC-PPC

PNG-150-PVC-PPC

PNG-225-PVC-PPC

PNG-300-PVC-PPC

RIGD0050EG

RIGD0075EG

RIGD0100EG

RIGD0125EG

RIGD0150EG

RIGD0200EG

RIGD0250EG

RIGD0300EG

RIGD0400EG

ROD-M10X3-HDG

ROD-M10X3-ZP

ROD-M12X3-HDG

ROD-M12X3-ZP

ROD-M16X3-HDG

ROD-M16X3-ZP

ROD-M20X3-HDG

ROD-M20X3-ZP

ROD-M6X3-HDG

ROD-M6X3-ZP

ROD-M8X3-HDG

ROD-M8X3-ZP

ROL10000EG

ROL110000EG

ROL12000EG

ROL13034EG

ROL13046EG

ROL13068EG

ROL14000EG

ROL15000EG

RUB-FLAT

RUB-LIP

SAD-015-CU-PPC


INDEX


252


SAD-020-CU-PPC

SAD-020-GWIR-HDG

SAD-025-CU-PPC

SAD-025-GWIR-HDG

SAD-032-CU-PPC

SAD-032-GWIR-HDG

SAD-040-CU-PPC

SAD-040-GWIR-HDG

SAD-040-PVC-PPC

SAD-050-CU-PPC

SAD-050-GWIR-HDG

SAD-050-PVC-PPC

SAD-065-CU-PPC

SAD-065-GWIR-HDG

SAD-065-PVC-PPC

SAD-080-CU-PPC

SAD-080-GWIR-HDG

SAD-080-PVC-PPC

SAD-090-PVC-PPC

SAD-100-CU-PPC

SAD-100-GWIR-HDG

SAD-100-PVC-PPC

SAD-150-CU-PPC

SAD-150-GWIR-HDG

SAD-150-PVC-PPC

SAD-200-GWIR-HDG

SAD-225-PVC-PPC

SAD-250-GWIR-HDG

SAD-300-PVC-PPC

SET-M1020-SS

SET-M1020-ZP

SET-M1030-SS

SET-M1030-ZP

SET-M1040-SS

SET-M1040-ZP

SET-M625-SS

SET-M625-ZP

SET-M820-SS

SET-M820-ZP

SET-M825-SS

SET-M825-ZP

SET-M830-SS

SET-M830-ZP

SET-M840-SS

SET-M840-ZP

SOB-040-CU-PPC

SOB-040-PVC-PPC

SOB-050-CU-PPC

SOB-050-PVC-PPC

SOB-065-CU-PPC

SOB-065-PVC-PPC

SOB-080-CU-PPC

15

16

15

16

15

16

15

16

17

15

16

17

15

16

17

15

16

17

17

15

16

17

15

16

17

16

17

16

17

175

175

175

175

175

175

175

175

175

175

175

175

175

175

175

175

18

18

18

18

18

18

18

18

18

18

18

18

18

18

18

18

70

70

70

70

70

70

71

187

73

71

187

73

71

187

73

71

187

73

71

187

73

72

71

187

73

72

71

187

73

72

71

72

72

71

187

73

72

71

187

71

72

68

68


Saddle, 20 Steel HDG







Saddle, 40 PVC PPC



Saddle, 50 PVC PPC



Saddle, 65 PVC PPC



Saddle, 80 PVC PPC

Saddle, 90 PVC PPC



Saddle, 100 PVC PPC



Saddle, 150 PVC PPC


Saddle, 225 PVC PPC


Saddle, 300 PVC PPC

Set Screw M10 x 20 316 SS

Set Screw M10 x 20 EG















Stand Off Bracket, 40 Copper PPC

Stand Off Bracket, 40 PVC PPC















Stand Off Wall Bracket, 40 PVC PPC






Single Piece Clip, 15 Copper PPC

Single Piece Clip, 15 Copper/SS 316 SS

Single Piece Clip, 15 Pressure PVC PPC













Single Piece Clip, 40 PVC PPC




















Single Piece Hanger, 40 PVC PPC



SOB-080-PVC-PPC

SOB-090-PVC-PPC

SOB-100-CU-PPC

SOB-100-PVC-PPC

SOB-125-CU-PPC

SOB-150-CU-PPC

SOB-150-PVC-PPC

SOB-225-PVC-PPC

SOB-300-PVC-PPC

SOW-040-PVC-PPC

SOW-050-PVC-PPC

SOW-065-PVC-PPC

SOW-080-PVC-PPC

SOW-090-PVC-PPC

SOW-100-PVC-PPC

SPC-015-CU-PPC

SPC-015-CU-SS

SPC-015-PPVC-PPC

SPC-020-CU-PPC

SPC-020-CU-SS

SPC-020-PPVC-PPC

SPC-025-CU-PPC

SPC-025-CU-SS

SPC-025-PPVC-PPC

SPC-032-CU-PPC

SPC-032-CU-SS

SPC-032-PPVC-PPC

SPC-040-CU-PPC

SPC-040-CU-SS

SPC-040-PPVC-PPC

SPC-040-PVC-PPC

SPC-050-CU-PPC

SPC-050-CU-SS

SPC-050-PPVC-PPC

SPC-050-PVC-PPC

SPC-065-CU-PPC

SPC-065-CU-SS

SPC-065-PPVC-PPC

SPC-065-PVC-PPC

SPC-080-CU-PPC

SPC-080-PVC-PPC

SPC-090-PVC-PPC

SPC-100-CU-PPC

SPC-100-CU-SS

SPC-100-PPVC-PPC

SPC-100-PVC-PPC

SPC-125-CU-PPC

SPC-125-CU-SS

SPC-150-CU-PPC

SPC-150-PVC-PPC

SPH-040-PVC-PPC

SPH-050-PVC-PPC



INDEX


SPH-065-PVC-PPC

SPH-080-PVC-PPC

SPH-090-PVC-PPC

SPH-100-PVC-PPC

SQ-38M10-ZP

SQ-38M12-ZP

SQ-38M16-ZP

SUR-M6

TCC0025CP

TCC0037CP

TCC0050CP

TCC0062CP

TCC0075CP

TCC0087CP

TCC0100CP

TCC0112CP

TCC0125CP

TCC0137CP

TCC0150CP

TCC0162CP

TCC0175CP

TCC0187CP

TCC0200CP

TCC0212CP

TCC0250CP

TCC0262CP

TCC0300CP

TCC0312CP

TCC0331CP

TCC0362CP

TCC0400CP

TCC0412CP

TCC0512CP

TCC0612CP

TP2201000125EG

TP2201000150EG

TP2201000200EG

TP2201000250EG

TP2201000300EG

TP2201000400EG

TP2201000500EG

TP2201000600EG

TP2201000800EG

TP2201250125EG

TP2201250150EG

TP2201250200EG

TP2201250250EG

TP2201250300EG

TP2201250400EG

TP2201250500EG

TP2201250600EG

TP2201250800EG

68

68

68

68

175

175

175

176

49

49

49

49

49

49

49

49

49

49

49

49

49

49

49

49

49

49

49

49

49

49

49

49

49

49

210

210

210

210

210

210

210

210

210

210

210

210

210

210

210

210

210

210

215

215

215

215

215

216

216

216

216

216

216

216

216

216

216

216

216

216

216

216

216

216

216

216

216

216

216

216

217

217

217

217

217

217

218

218

20

19

20

21

19

20

21

19

20

21

19

20

21

21

19

20





Square Washer, M10 EG



Suredrive Anchor, M6 EG

Tube Cushion Clamp 6.35mm

Tube Cushion Clamp 10mm





Tube Cushion Clamp 25.4m








Tube Cushion Clamp51mm












TP220 25nb x 32nb Lateral Sway Brace


TP220 25nb x50nb Lateral Sway Brace









TP220 32nb x50nb Lateral Sway Brace







TP225 25nb Quick End Brace

TP225 32nb Quick End Brace

TP225A Adapter Plate

TP225G 25nb Brace Fitting, Heavy Duty

TP225G 32nb Brace Fitting, Heavy Duty

TP230 25nb x 25nb Long Sway Brace

TP230 25nb x 32nb Lat & Longitudinal Sway Brace


TP230 25nb x50nb Lat & Longitudinal Sway Brace









TP230 32nb x50nb Lat & Longitudinal Sway Brace







TP230G 25nb x 150nb Lat & Longitudinal Sway Brace, Heavy Duty




TP235 25nb Quick Tab Brace Welded

TP235 32nb Quick Tab Brace Welded

TP240 Quick 4-Way Longitudinal Sway Brace Clamp 1 Inch EG

TP240 Quick 4-Way Longitudinal Sway Brace Clamp 1 Inch Plain

TP240 Quick 4-Way Longitudinal Sway Brace Clamp 1-1/4 Inch EG

TP240 Quick 4-Way Longitudinal Sway Brace Clamp 1-1/4 Inch Plain

TP280 Threaded Brace Fitting, Style AB

TP280 Threaded Brace Fitting, Style A

Two Piece Clip, 15 Steel HDG

Two Piece Clip, 20 Copper PPC


Two Piece Clip, 20 Pressure-PVC PPC










Two Piece Clip, 40-PVC PPC



TP225100EG

TP225125EG

TP225A000EG

TP225G100EG

TP225G125EG

TP2301000100PL

TP2301000125PL

TP2301000150PL

TP2301000200PL

TP2301000250PL

TP2301000300PL

TP2301000400PL

TP2301000500PL

TP2301000600PL

TP2301000800PL

TP2301250125PL

TP2301250150PL

TP2301250200PL

TP2301250250PL

TP2301250300PL

TP2301250400PL

TP2301250500PL

TP2301250600PL

TP2301250800PL

TP230G1000600PL

TP230G1000800PL

TP230G1250600PL

TP230G1250800PL

TP235100EG

TP235125EG

TP2401000100EG

TP2401000100PL

TP2401250125EG

TP2401250125PL

TP2800100EG

TP280P0100EG

TPC-015-GWIR-HDG

TPC-020-CU-PPC

TPC-020-GWIR-HDG

TPC-020-PPVC-PPC

TPC-025-CU-PPC

TPC-025-GWIR-HDG

TPC-025-PPVC-PPC

TPC-032-CU-PPC

TPC-032-GWIR-HDG

TPC-032-PPVC-PPC

TPC-040-CU-PPC

TPC-040-GWIR-HDG

TPC-040-PPVC-PPC

TPC-040-PVC-PPC

TPC-050-CU-PPC

TPC-050-GWIR-HDG


INDEX


254


TPC-050-PPVC-PPC

TPC-050-PVC-PPC

TPC-065-CU-PPC

TPC-065-GWIR-HDG

TPC-065-PVC-PPC

TPC-080-CU-PPC

TPC-080-GWIR-HDG

TPC-080-PPVC-PPC

TPC-080-PVC-PPC

TPC-100-CU-PPC

TPC-100-GWIR-HDG

TPC-100-PPVC-PPC

TPC-100-PVC-PPC

TPC-125-CU-PPC

TPC-125-GWIR-HDG

TPC-150-CU-PPC

TPC-150-GWIR-HDG

TPC-150-PVC-PPC

TPC-200-CU-PPC

TPC-225-FRC-HDG

TPC-225-PVC-HDG

TPC-225-PVC-PPC

TPC-250-CU-HDG

TPC-300-CU-HDG

TPC-300-FRC-HDG

TPC-300-PVC-HDG

TPC-300-PVC-PPC

TPC-375-FRC-HDG

TPC-375-PVC-HDG

TPC-450-FRC-HDG

UBOLT-M10X25

UBOLT-M10X32

UBOLT-M10X40

UBOLT-M10X50

UBOLT-M12X100

UBOLT-M12X150

UBOLT-M12X200

UBOLT-M12X65

UBOLT-M12X80

UBOLT-M6X32

UBOLT-M6X40

UBOLT-M6X50

VMP10

VMP12

VMP8

WAS-M10-ZP

WAS-M12-ZP

WAS-M16-ZP

WAS-M20-ZP

WAS-M6-ZP

WAS-M8-ZP

21

21

19

20

21

19

20

21

21

19

20

21

21

19

20

19

20

21

19

21

21

21

19

19

22

21

21

22

21

22

33

33

33

33

33

33

33

33

33

33

33

33

176

176

176

177

177

177

177

177

177

75

74

74

188

188




















Two Piece Clip, 225 FRC HDG

Two Piece Clip, 225 PVC HDG


Two Piece Clip, 250 Copper HDG

Two Piece Clip, 300 Copper HDG







U-Bolt c/w Nut, M10 x 25 HDG









U-Bolt c/w Nut, M6 x 32 EG



Vertical Mounting Plate M10



Flat Washer, 10mm EG




Flat Washer, 6mm EG

Flat Washer, 8mm EG

Adjustable Wall Bracket, 47mm EG

Adjustable Wall Bracket, 20mm PPC

Adjustable Wall Bracket, 20mm EG

Wall Bracket, adj, Cup Screw SS

Wall Bracket, adj, Set Screw SS


WB-ADJ-GAL

WB-ADJ-PPC

WB-GAL

WB-SS CUP

WB-SS SET


M738C-ENAU M710CT06ENAU 0116M7Copyright ©2007 ERICO International Corporation. All rights reserved.CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.

AUSTRALIAPhone 61-2-9751-8500Fax 61-2-9475-5334

BELGIUMPhone 32-14-69-96-88Fax 32-14-69-96-90

CANADAPhone 1-800-677-9089Fax 1-800-677-8131

CHILEPhone 56-2-370-2908Fax 56-2-370-2914

DENMARKPhone 46-40-611-13-60Fax 46-40-611-9415

FRANCEPhone 33-4-77-36-54-32Fax 33-4-77-55-20-10

GERMANYPhone 0-800-189-0272Fax 0-800-189-0274

HONG KONGPhone 852-2764-8808Fax 852-2764-4486

HUNGARYPhone 31-13-58-35-415Fax 31-13-58-35-499

INDONESIAPhone 62-21-575-0941Fax 62-21-575-0942

ITALYPhone 39-02-8474-2250Fax 39-02-8474-2251

MEXICOPhone 52-55-5260-5991Fax 52-55-5260-3310

NETHERLANDSPhone 31-13-58-35-400Fax 31-13-58-35-499

NORWAYPhone 47-67-53-12-00Fax 47-67-12-42-68

SINGAPOREPhone 65-6-268-3433Fax 65-6-268-1389

SPAINPhone 34-93-467-7726Fax 34-93-467-7725

SWEDENPhone 46-40-611-13-60Fax 46-40-611-94-15

SWITZERLANDPhone 00-800-5000-1090Fax 00-800-6000-1090

THAILANDPhone 66-2-267-5776Fax 66-2-636-6988

UNITED KINGDOMPhone 44-118-958-8386Fax 44-118-955-0925

UNITED STATESPhone 1-440-248-0100Fax 1-440-248-0723

POLANDPhone 48-71-374-40-22Fax 48-71-374-40-43

BRAZILPhone 55-11-3623-4333Fax 55-11-3621-4066

www.erico.com

CHINAPhone 86-21-3430-4878Fax 86-21-5831-8177

UNITED ARABEMIRATESPhone 971-4-881-7250Fax 971-4-881-7270


m710ct06enau_new_09_27_07.qxp:mff australian catalog

Documents