m2013015605 vsm-xp r10 en datasheet
TRANSCRIPT
-
7/27/2019 m2013015605 Vsm-xp r10 en Datasheet
1/2
ALCATEL-LUCENT7750 SERVICE ROUTER ANDALCATEL-LUCENT 7450 ETHERNETSERVICE SWITCH
VERSATILE SERVICES MODULE-XP
The AlcatelLucent Versatile Services ModuleXP (VSMXP) on the industryleading
AlcatelLucent 7750 Service Router (SR) and AlcatelLucent 7450 Ethernet Service Switch (ESS)
platorms enables new service oerings by internally connecting services with centralized
quality o service (QoS) enorcement.
The AlcatelLucent VSMXP provides high
perormance, interservice connectivity
within a single chassis with the advanced
QoS and accounting eatures that have
made the AlcatelLucent 7750 SR and
7450 ESS industryleading platorms.
The VSMXP can be used to internally
interconnect pairs o services, thus creating
new service oerings. For example, by
interconnecting a Layer 2 service and a
Layer 3 service, a routed Layer 2 service
is created. Another example o a new
application is interconnecting the upper
and lower rings or a wholesale serviceprovider with a G.8032 ring topology
network in a single node. By utilizing the
VSMXP, trafc rom each ring direction is
aggregated, allowing each retail customer
to have individual QoS policy applied and
ull accounting detail.
AlcatelLucent VSMXPs are ully supported
by the AlcatelLucent 5620 Service Aware
Manager (SAM), and support inservice
insertion and removal. Each AlcatelLucent
VSMXP occupies hal a slot in an Input/
Output Module (IOM) and can interconnect
up to 25 Gb/s (halduplex) o serviceswhen installed in an IOM3XP and 10 Gb/s
(hal duplex) when installed in an IOM2 or
IOM1. Unidirectional trafc can peak to
the hal duplex capacity through a VSMXP
with onboard logic, ensuring air access
to available bandwidth or bidirectional
trafc patterns. Multiple VSMXP modules
can be installed in a chassis and logically
grouped, increasing the overall inter
connect capacity through load sharing
across VSMXPs in the group.
FEATURES AND BENEFITS
Allowsforthecreationofnewservices
by internally interconnecting services
High-performanceserviceinterconnectwith up to 25 Gb/s (hal duplex)
throughput per VSMXP
SupportforgroupingmultipleVSM-XP
modules to redundantly scale interconnect
bandwidth to more than 200 Gb/s
per group
AdvancedHierarchicalQoS(H-QoS)for
interconnected services or aggregated
interconnected services, including QoS
remapping, shaping and policing
Comprehensiveingressandegress
accounting or each interconnected service
-
7/27/2019 m2013015605 Vsm-xp r10 en Datasheet
2/2
www.alcatellucent.com Alcatel, Lucent, AlcatelLucent and the AlcatelLucent logo are trademarks o
AlcatelLucent. All other trademarks are the property o their respective owners. The inormation presented
is subject to change without notice. AlcatelLucent assumes no responsibility or inaccuracies contained herein.
Copyright 2013 AlcatelLucent. All rights reserved. M2013015605 (February)
ORDERING INFORMATION
Table 1 provides ordering inormation or the VSMXP hardware.
Table 1. AlcatelLucent VSMXP order inormation
PART NUMBER PART NAME DESCRIPTION
3HE05942AA VSM 7x50 VSMXP 7x50 Versatile Services Module (VSM),
25 Gb/s ullduplex throughput,
occupies one (1) MDA slot
TECHNICAL SPECIFICATIONS
Minimum operating system sotware
Release9
Hardware compatibility
7750SR
IOM3XPB
IOM3XP
IOM2 20G
IOM 20G
7450ESS
IOM3XPB
IOM3XP
IOM 20G
Perormance and scalability
IOM3-XP:Upto25Gb/shalfduplex
per VSMXP
IOM2andIOM1:Upto10Gb/shalfduplex
per VSMXP
AtleasteightlogicalgroupsofVSM-XP
or interconnected bandwidth scaling
AtleasteightVSM-XPsperlogicalgroup
LimitsonlogicalgroupsandVSM-XPper
logical group are chassis and sotware
release dependent
Dimensions and weight
Height:3.6cm(1.4in.)
Width:19cm(7.5in.)
Depth:17.8cm(7in.)
Weight:1.15kg(0.52lb)
Note:Weightanddimensionsareapproximateandsubject to change. Reer to the appropriate Installation
Guide or the current weight and dimensions.
Environmental specifcations
Operatingtemperature:5Cto40C(41Fto104F)
Operatingrelativehumidity:5%to85%
Operatingaltitude:Upto4000m
(13,123ft)at30C(86F)
NetworkEquipmentBuildingSystem
(NEBS) Level 3 design (compliance
testing pending)
Maximumpowerconsumption:50W
Regulatory agency standards
Safety:UL60950-1;CAN60950-1;
EN60950-1;CEMark
EMC:EN55022
EMI:FCCPart15,ClassA;EN55022