m-power sine wave dc/ac inverters - farnell … · ignition inhibit circuit automatically switches...
TRANSCRIPT
www.merl inequipment.com 19
M-Power Inverters simply and
silently convert 12V DC battery
power to 230V AC electricity. Ideal for
operating mains powered devices on board
boats and vehicles.
Merlin Equipment was the first in the
UK to introduce high frequency inverters to
the UK twenty years ago. This experience
translates into a highly efficient and reliable
range today.
M-Power employs state of the art
switch-mode power conversion techniques
to provide compact, efficient and
reliable power. Our Pure Sinewave
output ensures compatibility
with all AC appliances (Modified
Sinewave/Square Wave inverters
are not compatible with sensitive
electronics, variable speed power
tools, some chargers and motors).
Connections are via heavy duty
studs on the rear of the unit. AC
output connects directly to the UK
socket on the front panel. A digital
display provides the user with battery and
inverter status information.
M-Power inverters interface with an
optional remote panel. This provides inverter
status information, remote on/off switch and
an ignition inhibit circuit. If connected, the
ignition inhibit circuit automatically switches
the inverter off when the engine is turned off
– perfect for service van use, where inverters
being left inadvertandly on is a regular
problem.
PRODUCT HIGHLIGHTS4 Pure Sinewave output.
4 extremely compact, efficient &
reliable.
4 easy to install and use.
4 Built in display provides battery and
inverter status.
4 Huge surge power ability for
starting ‘difficult’ loads.
4 optional remote on/off Panel.
M-POWER 700W M-POWER 1400W M-POWER 2000W
MERLIN PART NUMBER 01-8004 01-8005 01-8006
NoMINal INPut Voltage 12V dc 12V dc 12V dc
INPut Voltage raNge 700W 1400W 2000W
Surge caPacItY (PeaK) 1400W 2800W 4000W
ac outPut FreQueNcY 50Hz +/- 0.5Hz 50Hz +/- 0.5Hz 50Hz +/- 0.5Hz
ac outPut Voltage raNge 230 V ac +/- 10% 230 V ac +/- 10% 230 V ac +/- 10%
outPut WaVeForM true SINe WaVe true SINe WaVe true SINe WaVe
eFFIcIeNcY 90% 90% 90%
No load curreNt draW <1000 ma <1000 ma <1000 ma
loW BatterY alarM audIBle, 11V dc audIBle, 11V dc audIBle, 11V dc
loW BatterY cutout 10.5V dc 10.5V dc 10.5V dc
oPeratINg teMPerature raNge 0 c - 40 c 0 c - 40 c 0 c - 40 c
ac recePtacle* uK - tHree PIN uK - tHree PIN uK - tHree PIN
dIgItal dISPlaY (FroNt oF uNIt)
V dc, ac outPut PoWer& error codeS
V dc, ac outPut PoWer& error codeS
V dc, ac outPut PoWer& error codeS
dIMeNSIoNS (H x W x l) 90 x 185 x 310mm 115 x 240 x 369mm 115 x 240 x 369mm
WeIgHt 2.7Kg 4.7Kg 5.5Kg
reMote oN/oFF PaNel (25’ caBle) oPtIoNal oPtIoNal oPtIoNal
StaNdardS ce, e-MarK, aBYc, ul ce, e-MarK, aBYc, ul ce, e-MarK, aBYc, ul
24V DC - 230V AC Inverters also available - please call our sales team for details* Euro sockets also available.
M-Power Sine Wave DC/AC Inverters
4 Open Lead Acid4 Sealed Lead Acid (Wet)4 VRLA Gel4 VRLA AGM4 Carbon Fibre
Optional Remote On / Off Panel complete with 25 ft cable. Plugs into inverter via a telephone type socket. (P/N 01-8021)
M-Power is available in three power
outputs:
700 watts – Computers, power tool
chargers, audio/visual equipment, fridge/
freezer etc
1400 watts – Power tools, small toaster,
small microwave, small water heater etc
2000 watts – Kettle, large microwave,
small welder, pumps, small air conditioner
and much more!
The diagram below illustrates the difference between a modified sine wave and a pure sine wave AC supply (as seen through a scope). The modified output (although it follows a similar pattern) has sharp edges that protrude outside the normal shape of the smooth sine wave. This causes interference and compatibility issues with many appliances.