lynx touch – l5100 z-wave setup
DESCRIPTION
Lynx Touch – L5100 Z-Wave SetupTRANSCRIPT
![Page 1: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/1.jpg)
Lynx Touch – L5100 Technical Training
Z-Wave Setup
![Page 2: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/2.jpg)
2 HONEYWELL - CONFIDENTIAL File Number
L5100-Z-wave – Combines Home Automation and Security
• Controls up to: - 40 Devices (Lights, switches and lamp
modules) - 3 Thermostats - 4 Door Locks
• Rules and Scenes - 20 Rules (Event Based Actions) - 20 Schedules (Time Based Actions) - 20 Scenes (Pre-defined set of actions)
• Remote Control using Total Connect 2.1
![Page 3: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/3.jpg)
3 HONEYWELL - CONFIDENTIAL File Number
Z-Wave Setup
• First, Enable the Z-Wave Module - Enable the L5100 for Z-Wave Before Installing the Z-Wave
Module. - Enter Installer Programming and Touch the Page Down Arrow.
• From this Screen, Touch “Z-Wave”.
![Page 4: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/4.jpg)
4 HONEYWELL - CONFIDENTIAL File Number
Z-Wave Setup
• Next, Touch “Z-Wave” and Toggle it to “Enabled…”
• Touch “Temperature Display” to Toggle Celsius, if Needed. • Touch Save After Making Changes
![Page 5: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/5.jpg)
5 HONEYWELL - CONFIDENTIAL File Number
Z-Wave Setup
• Z-Wave Module is Installed Telephone Side - Power System Down Before Installation and
after Enabling in Programming
![Page 6: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/6.jpg)
Lynx Touch – L5100 Technical Training
Including Devices
![Page 7: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/7.jpg)
7 HONEYWELL - CONFIDENTIAL File Number
Including Devices
• To Include Devices Touch the Automation Icon. • Next Touch “Tools”, and followed by, “Include Devices”.
Note: Install Switch and Thermostats in Final Location Before Inclusion.
![Page 8: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/8.jpg)
8 HONEYWELL - CONFIDENTIAL File Number
Including Devices
• The L5100 will Enter Inclusion Mode and Prompt You When Ready to Include Devices.
• Toggle the Device On/Off or Press the Device’s Function Button to Enroll.
![Page 9: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/9.jpg)
9 HONEYWELL - CONFIDENTIAL File Number
Including Devices
• The L5100 will Include the Device into its Network.
• After Included, the Device Type, Manufacture and Node ID will be displayed.
• To Include More Devices, Touch “Include.” • When Finished, Touch the Back Arrow.
![Page 10: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/10.jpg)
10 HONEYWELL - CONFIDENTIAL File Number
Including Devices
Including a Switching Module • Make Sure the Switch/Module Indicator LED is Illuminated • Press, and Release, the Switch/Module Button to Include. • The Indicator LED will Flash Amber During the Inclusion
Process
ON/OFF Enroll Button
ON/OFF Enroll Button
![Page 11: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/11.jpg)
11 HONEYWELL - CONFIDENTIAL File Number
Including Devices
Including a Yale Lock • Activate the Yale Touch Screen by Palming the Keypad
with Your Hand • Next, Follow the Steps below, Starting with the Master PIN
• Default Master PIN is “12345678”
![Page 12: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/12.jpg)
12 HONEYWELL - CONFIDENTIAL File Number
Including Devices
Including a Kwikset Lock • Remove the Back Cover, then Press and Release the
“A” Button
![Page 13: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/13.jpg)
13 HONEYWELL - CONFIDENTIAL File Number
Enrolling Schlage Locks
Including Devices
![Page 14: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/14.jpg)
14 HONEYWELL - CONFIDENTIAL File Number
Enrolling a Schlage Lock • The program code can be
found on top of document number 1 of the LiNK Installation Instructions.
• It can also be found on the back of the lock
Including Devices
![Page 15: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/15.jpg)
15 HONEYWELL - CONFIDENTIAL File Number
Including Devices
User Codes & Z-Wave Locks • Lynx Touch Can Push User Codes to Z-Wave Locks • Unlocking Door with Code Can Unlock or Also Disarm
Note: During Inclusion, Each Programmed User Code Will Take 4 Seconds to Transfer to the Z-Wave Lock.
![Page 16: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/16.jpg)
16 HONEYWELL - CONFIDENTIAL File Number
Including Devices
Including a ZWSTAT • At the ZWSTAT, Enter the Program Mode
1. Press SYSTEM
2. Press, and Hold the 3rd and 5th Buttons Simultaneously
![Page 17: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/17.jpg)
17 HONEYWELL - CONFIDENTIAL File Number
Including Devices
Including a ZWSTAT • Press the Down Arrow Until the Following Screen is
Displayed:
![Page 18: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/18.jpg)
18 HONEYWELL - CONFIDENTIAL File Number
Including Devices
Including A Thermostat • Press the Up Arrow to Change the Option to a “1”
• Press DONE on the ZWSTAT to Exit Programming
Change This Value to a “1”
This Will Be Displayed
![Page 19: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/19.jpg)
19 HONEYWELL - CONFIDENTIAL File Number
Including Devices
• Each Device May be Renamed by Selecting the Device, Found within its Category.
![Page 20: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/20.jpg)
20 HONEYWELL - CONFIDENTIAL File Number
Including Devices
• Touch “Edit” to Edit the Name.
• Use the Keyboard to Enter a New Name for this Lock.
• Touch “Done” when Complete
![Page 21: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/21.jpg)
21 HONEYWELL - CONFIDENTIAL File Number
Including Devices
• The New Name will Appear on the Device Control Screen and on the Selection List.
• Touch “Back” to Return to the Selection List.
• To Return to the Automation Screen, Touch the Back Arrow “”.
![Page 22: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/22.jpg)
22 HONEYWELL - CONFIDENTIAL File Number
Including Devices
• Each Selection List Has a Refresh Status Button
• Refresh Status will Poll Each Device for its Current Status. - Supports real time status
![Page 23: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/23.jpg)
23 HONEYWELL - CONFIDENTIAL File Number
Including Devices
• Devices Can Only be Included Within Direct Range. • Inclusion Ranges
- Switches & Thermostats – Full Power at MAX Range - Locks – Low Power at 6 Feet Max Range Does not apply to the latest firmware of the Yale locks
• Include Z-Wave Locks First, at the L5100. Direct Range = Low Power Inclusion
Device
![Page 24: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/24.jpg)
24 HONEYWELL - CONFIDENTIAL File Number
Including Devices
• Z-Wave Programming Tools Assist with Large Installations • USB Program Tool Allows for Z-Wave Device Map Backup
- Excluding Locks Setup Steps • Include All Switches and Thermostats Using Program Tool.
- If Using the USB Program Tool, Save Device Map When Complete. • Shift L5100 to Secondary Controller. (Advanced Tools) • Enroll L5100 into Program Tool as Secondary Controller. • L5100 Imports Z-Wave Device Map.
![Page 25: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/25.jpg)
25 HONEYWELL - CONFIDENTIAL File Number
Including Devices
• Transfer Primary Control from Program Tool - Shifts Primary Control to L5100
• L5100 Queries All Devices For Node Information and Updates Node Map (Network Rediscovery)
• Take L5100 to Z-Wave Locks to Enroll - Can be Accomplished Running on Battery Only
![Page 26: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/26.jpg)
26 HONEYWELL - CONFIDENTIAL File Number
Including Devices
• Locks Must be Included Directly Into the L5100 - Secure Devices (Locks) Are Not Support by Remotes
Low Power Inclusion Range
![Page 27: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/27.jpg)
Lynx Touch – L5100 Technical Training
Excluding Devices
![Page 28: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/28.jpg)
28 HONEYWELL - CONFIDENTIAL File Number
Excluding Devices
• A Device Can Only be Included into One Z-Wave Network at a Time.
• Resetting, Fixing or Defaulting the Controller Does Remove Devices from its Own Memory; but, Does Not Communicate this to the Devices Themselves.
• Devices Removed Without Being Excluded will Still Need to Undergo the Exclusion Process. - 15 second supervision rate
• Devices that Fail Inclusion Should be Excluded before Re-Attempting to be Included.
• See Advanced tools for more information
![Page 29: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/29.jpg)
29 HONEYWELL - CONFIDENTIAL File Number
Excluding Devices
• To Exclude a Device, Touch “Tools” and “Exclude Devices” from the Automation Screen.
• After Entering Exclusion Mode, the L5100 will Prompt You to Press the Function Button on the Device.
![Page 30: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/30.jpg)
30 HONEYWELL - CONFIDENTIAL File Number
Excluding Devices
• Results Shown When Devices Are Excluded • If the Excluded Device was Not Part its Own Network,
“Unknown Device Excluded” will be Displayed. • To Exclude Additional Devices, Touch “Exclude”.
![Page 31: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/31.jpg)
Lynx Touch – L5100 Technical Training
Advanced Tools
![Page 32: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/32.jpg)
32 HONEYWELL - CONFIDENTIAL File Number
Advanced Tools
• Node/Device Supervision - Provides Notice of Failed Nodes
• Network Rediscovery
![Page 33: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/33.jpg)
33 HONEYWELL - CONFIDENTIAL File Number
Advanced Tools
• Failed Nodes Listed • Fixing Failed Nodes, Deletes the Device
![Page 34: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/34.jpg)
34 HONEYWELL - CONFIDENTIAL File Number
Advanced Tools
The L5100 has a Suite of Advanced Z-Wave Tools • View Enrolled Devices • View Enrolled Controllers • Reset Controller • Pri. Controller Shift to Secondary • Learn • Locking Door • Base Command Set On • Base Command Set Off
![Page 35: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/35.jpg)
35 HONEYWELL - CONFIDENTIAL File Number
Advanced Tools
• To Access the Advanced Tools Menu: - From the Automation Screen, “Touch Tools” - From the Tools Screen, Touch “Advanced Tools”
![Page 36: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/36.jpg)
36 HONEYWELL - CONFIDENTIAL File Number
Advanced Tools
• To Access the Advanced Tools Menu: - Next, Enter the System Master Code
![Page 37: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/37.jpg)
37 HONEYWELL - CONFIDENTIAL File Number
Advanced Tools
• View Enrolled Devices – Lists All Mapped Slave Nodes - System Index/Name - Device Type - Device ID - Node Number - Manufacturer
![Page 38: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/38.jpg)
38 HONEYWELL - CONFIDENTIAL File Number
• View Enrolled Controllers – Lists All Mapped Primary and Secondary Controllers - Node Number - Controller Role: (P)rimary or (S)econdary - Home ID - Device Type - Device ID - Manufacturer
Advanced Tools
![Page 39: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/39.jpg)
39 HONEYWELL - CONFIDENTIAL File Number
Advanced Tools
• Reset Controller – Default Resets Controller - Deletes All Nodes - Generates a New Random Home ID
![Page 40: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/40.jpg)
40 HONEYWELL - CONFIDENTIAL File Number
Advanced Tools
• Pri. Controller Shift to Secondary – Transfers the Role of Primary Controller to Another Controller, Usually a Z-Wave Remote Control. - Z-Wave Network is Duplicated - Both controllers Can Operate the Z-Wave Devices - Only the Primary Can Include/Exclude Devices
![Page 41: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/41.jpg)
41 HONEYWELL - CONFIDENTIAL File Number
Advanced Tools
• Learn – Includes the Panel as Secondary Controller, Usually on a Z-Wave Remote Control. - Start Include Process on Remote/Primary, then Touch Learn - Z-Wave Network is Duplicated - Both controllers Can Operate the Z-Wave Devices - Only the Primary Can Include/Exclude Devices - Z-Wave Remote Used to Include Z-Wave Devices During Setup
![Page 42: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/42.jpg)
42 HONEYWELL - CONFIDENTIAL File Number
Advanced Tools
• Locking Door – Locking the Door Can Arm the Panel in the Following Modes - Arm Away - Arm Without Auto Stay - Arm Stay
![Page 43: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/43.jpg)
43 HONEYWELL - CONFIDENTIAL File Number
Advanced Tools
• Base Command Set On – Turns On All Switches. - Some Thermostats Enter Energy Savings Mode - Locks Ignore this Command - Z-Wave Certification Required Test Command
![Page 44: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/44.jpg)
44 HONEYWELL - CONFIDENTIAL File Number
Advanced Tools
• Base Command Set Off – Turns Off All Switches. - Some Thermostats Exit Energy Savings Mode - Locks Ignore this Command - Z-Wave Certification Required Test Command
![Page 45: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/45.jpg)
45 HONEYWELL - CONFIDENTIAL File Number
FAQ’s
• Z-wave Device support - Will work with same Z-wave devices specified in Tuxedo, see
User Guide for details - Inclusion device support - GE, Aspire, and Leviton.
• How do I Flash lights on an event (like burglary)? - Z-wave does not handle flashing of lights well. - The easiest way is to use an outlet that is z-wave controlled, and
then install a strobe into the outlet. - When the event occurs, switch on the outlet to turn on the strobe.
The strobe will then begin to flash. • How do you back up Z-wave information?
- Z-wave information is uploaded into Compass, so it can be used to recreate the scenes, rules and schedules originally created if necessary.
- Use a secondary controller, connected to a laptop (such as the Leviton USB device), save the information to a file.
![Page 46: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/46.jpg)
46 HONEYWELL - CONFIDENTIAL File Number
FAQ’s
• Can the Duress code be used to unlock the door and disarm the system? - Yes, if enabled in user code programming
• If there is a z-wave system, and someone moves a device (lamp module or other), how do you “repair” the network so that the device still reports into and can be controlled from the system? - Z-wave has a self-repair function.
• Z-wave devices - Primary controller is the only controller to include devices - Nodes start at 1 (primary controller), and go to 232. - If you include and exclude the same device 232 times, you will
run out of nodes, and the controller will then restart and fill open nodes
![Page 47: Lynx Touch – L5100 Z-Wave Setup](https://reader030.vdocuments.mx/reader030/viewer/2022020117/55cf994d550346d0339cafd7/html5/thumbnails/47.jpg)
47 HONEYWELL - CONFIDENTIAL File Number
FAQ’s
• Can you learn a L5100 into another L5100 as a secondary controller - No, this does not work, and may be fixed in a running change. - The panel will try and find the device through each of the nodes
on the network. - It will take some time, but you can expedite it by turning on/off the
light, or activating the device. • Does L5100 support Network Wide Inclusion
- No. But, most manufacturers don’t support it yet, including Leviton.
• What if I install more than 40 light switches on a L5100? - You can add more than 40, you cant control more than 40