luxembourg’s “new” emission inventory system luxembourg’s “new” emission inventory...
TRANSCRIPT
Luxembourg’s “new” Emission Luxembourg’s “new” Emission Inventory SystemInventory System
Marc SchumanSebastian Siegmundt
Larnaca, 10-11 May 2010
TFEIP – Larnaca10-11 May 2010
Overview
• Historical considerations• Current inventory system• Data flow• Pro & Contra• Practical Implementation of new system
by Sebastian Siegmundt• Conclusions
TFEIP – Larnaca10-11 May 2010
Historical considerations
• before 2006:before 2006:
• 2006-2008:2006-2008:
one single person in charge of GHG and air pollutant inventories compilation using CollectER II and ReportER II inventories not complete (mostly large point sources, no energy balance
considered, lack of detailed data, not all sectors covered, SNAP nomenclature used)
establishment of a national system for GHG inventory nomination of sector experts focus on GHG (political awareness) switch to inventory compilation using MS-Excel covering all CRF
sectors
TFEIP – Larnaca10-11 May 2010
Current inventory system
Ministry of Sustainable Development & InfrastructuresNational Focal Point for the UNFCCC
final official inventory & report (NIR, IIR) submission
Environment Agency Single National Entity (SNE) with overall responsibility for the national inventory:
acts as National Inventory Compiler (supervises inventory preparation process) compiles CRF/NFR tables and Reports (NIR, IIR)
manages NIS, implements QA/QC procedures
input from sectoral expertsAEV
Air/Noise, Waste, Operation Permits
Ministries / AdministrationsADA, AEF, ASTA, DEN, DEV,
SNCT, STATEC, SER
(outsourced studies)
outputsInternational Obligations
GHG, CLRTAP & NEC, PRTR reporting AD for GHG and other gases projections
Spatial Data Information & SEIS (EC)National Monitoring
Statistics & Indicators for the State of the Environment or for Sustainable Development Reporting, PaMs definition and monitoring.
QA/QC
SEG Umwelt
(Tier 1 &2)
‘political’ responsibility
‘technical’ responsibility
TFEIP – Larnaca10-11 May 2010
Data flow
CRF ReporterCRF Reporter
NFR TemplatesNFR Templates
Sector ExpertsSector Experts
multiple multiple administrationsadministrations
multiple data multiple data sources (incl. sources (incl. PRTR)PRTR)
multiple multiple calculation filescalculation files
define structuredefine structure
perform QA/QCperform QA/QC
Inventory CompilerInventory Compiler
CLRTAP & NECD: inventory compiler acts as sector expert for all sectors !CLRTAP & NECD: inventory compiler acts as sector expert for all sectors !
TFEIP – Larnaca10-11 May 2010
Pro & Contra of current system
Streamlining the national system for GHG and air pollutants inventories (same basis of activity data)
Limited human and financial resources due to budgetary restrictions (financial crisis)
All calculation steps are easily verified and transparent Calculation files can be easily adapted. No direct link to plant specific data stored in the PRTR database. Handling of multiple linked Excel files is work intensive and error
prone Manual data transfer to CRF-Reporter or NFR templates is error prone
and time consuming
Efficient Inventory Data Handling System needed!
TFEIP – Larnaca10-11 May 2010
Practical implementation: Focus on…
• How could a single person manage the whole How could a single person manage the whole national emissions inventory of Luxemburg national emissions inventory of Luxemburg efficiently? efficiently?
– Efficient data structure– Simplifying workflows– Enhance data quality and reduce error proneness
TFEIP – Larnaca10-11 May 2010
AEC∏
AEC∏
Centralized Database System
Database
International treaties
Inventories
Emittents
Sectorexperts
European Pollutant Release TransferRegister
PRTR∑
PRTR∑
CRF∑
CRF∑
TFEIP – Larnaca10-11 May 2010
Principle of data storage in Mesap (1)
Gg a REF 92,41 87,70 89,30
2004 2005 2006
Combustion of non-biomass waste for electricity production by facility LU-34
Non-biomasswaste
Combustion
Multi dimensional key
Electricityproduction
Gg
ValuesSpecification
TFEIP – Larnaca10-11 May 2010
Principle of data storage in Mesap (2)
AttributeAttribute CategoryCategory PollutantPollutant CommodityCommodity SourceSource
Activity Rate
Combustion
Production Volume
Operation Hours
Quantity
Emission
Exports
Population Size
Cement
Electricity prod.
Soda ash
Hot rolling mills
Paint application
Crop residue
Rearing of poultry
Waste incineration
CO2
CH4
NMVOC
PM2,5
HFCs
Naphtalene
Lindane
Cadmium
Jet fuel
Crude oil
Residential oil
Motor gasoline
Waste
Charcoal
Wheat
Pigs
Poultry
LU-32
LU-33
LU-34
LU-35
LU-36
LU-37
LU-38
LU-39
LU-40
Descriptor Descriptor Unit Value Value ValueTime
Hyp.
TFEIP – Larnaca10-11 May 2010
Metadata of values
Data protection level
Quality level
History
Value documentation
Descriptor Descriptor Unit Value Value ValueTime
Hyp.
TFEIP – Larnaca10-11 May 2010
Data structure and resolution
CRF category: Non ferrous metals
CRF category: Non ferrous metals
Sector: Secondary aluminum productionSector: Secondary
aluminum production
Technology: Combustion plant <50MW
Technology: Combustion plant <50MW
Facility: Hydro Aluminum Clervaux
Facility: Hydro Aluminum Clervaux
Energy balance:Consumption of diesel oil
Energy balance:Consumption of diesel oil
NFR category: Road transport – passenger
cars
NFR category: Road transport – passenger
cars
TFEIP – Larnaca10-11 May 2010
Simplifying workflows: automisation
NFR table
∑∑
Time series aggregation
Export toCRF XML
PRTR- DatabasePRTR-
Database
Emissions InventoryDatabase
Emissions InventoryDatabase
∏∏
Emissioncalculation
Import ofExcel files
EuropeanComissionEuropeanComission
Ministry ofAgriculture Ministry ofAgriculture
Export intoEPRTR XML
Solventscalculation
TFEIP – Larnaca10-11 May 2010
Quality issues
• Plausibility check– Entering data– Import data– Calculate data
• Quality check tool– Outliers– Change date
• Data comparision– PRTR-Data vs. own
calulations
PRTR- DatabasePRTR-
Database
Emissions InventoryDatabase
Emissions InventoryDatabase
TFEIP – Larnaca10-11 May 2010
Conclusion
• Flexible data handling system• Easily adaptable to new reporting obligations• Timely submission