lug tear sheet

Contact us at: 845.247.4708 www.we-llc.com • Material: 304 stainless steel, tin-plated copper, outdoor rated • Low proﬁle design • Multiple equipment ground conductor allowance: One 14 AWG to 6 AWG or two 10 AWG, two 12 AWG • Listed to ANSI/UL 467 by Intertek ETL WEEB Lug The WEEB Lug consists of a WEEB (Washer, Electrical Equipment Bond), lay-in lug, and hardware. It is used with one solid or stranded copper wire (6AWG to 14AWG), or two copper wires (10AWG to 12AWG) to provide a continuous ground on PV mounted solar systems. Unlike traditional lay-in lugs, the WEEB Lug does not require surface preparation on rail or module to install. The WEEB Lug is installed using a 1/4-20 stainless steel screw which tightens the WEEB, allowing the specialized teeth to embed into anodized aluminum, galvanized steel, or any electrically conductive metal to establish a gas tight electrical connection. The tin-plated Lug assures minimum contact resistance and protection against corrosion. The copper wire is clamped by a 1/4-28 stainless steel screw, which is horizontal to the tang for easy access when mounted under a PV module. The low proﬁle of the WEEB Lug allows it to be installed in a variety of positions and comes with hardware to mount it to a rail or through a 1/4 inch clearance hole.

Upload: wiley

Post on 27-Mar-2016

233 views

Category:

Documents

1 download

Report

Download

Embed Size (px):

DESCRIPTION

LUG Tear Sheet

TRANSCRIPT

• Material:304stainlesssteel,tin-platedcopper,outdoorrated• Lowprofiledesign• Multipleequipmentgroundconductorallowance:One14AWGto6AWGortwo10AWG,two12AWG• ListedtoANSI/UL467byIntertekETL

WEEB Lug TheWEEBLugconsistsofaWEEB(Washer,ElectricalEquipmentBond),lay-inlug,andhardware.Itisusedwithonesolidorstrandedcopperwire(6AWGto14AWG),ortwocopperwires(10AWGto12AWG)toprovideacontinuousgroundonPVmountedsolarsystems.Unliketraditionallay-inlugs,theWEEBLugdoesnotrequiresurfacepreparationonrailormoduletoinstall.TheWEEBLugisinstalledusinga1/4-20stainlesssteelscrewwhichtightenstheWEEB,allowingthespecializedteethtoembedintoanodizedaluminum,galvanizedsteel,oranyelectricallyconductivemetaltoestablishagastightelectricalconnection.Thetin-platedLugassuresminimumcontactresistanceandprotectionagainstcorrosion.Thecopperwireisclampedbya1/4-28stainlesssteelscrew,whichishorizontaltothetangforeasyaccesswhenmountedunderaPVmodule.ThelowprofileoftheWEEBLugallowsittobeinstalledinavarietyofpositionsandcomeswithhardwaretomountittoarailorthrougha1/4inchclearancehole.

Tear-Sheet Toolkit - LLLI

NWC Tear Sheet

Financial Tear Sheet - Zions Bank | Personal Banking | Savings

HMP Tear Sheet - College of Health and Human Services

Tear Sheet Blue Man

IRC TYRE INDUSTRIAL RUBBER COMPANYirctyre.com/irc.pdf · 2018-03-09 · wall Width Load Steer Wheel Wheel J 6km,'h 25km/h LUG, RIB LUG LUG, Ria LUG, Ria RIB LUG LUG LUG LUG LUG LUG

Tear Sheet & Poster Calendar Sales Manual - Gordon Bernard

2019 Environmental, Social and Governance Tear Sheet

2020 Environment, Social and Governance Tear Sheet

2012-05-07 University of Texas, Austin, Daily Texan Page 3 tear sheet

Vero Seating Tear Sheet

Accounting Services Tear Sheet