lte mifi serial spec - aksesmurah.com
TRANSCRIPT
Item Sub Item SPEC NoteID name ID Drawing LCD/LED Battery Size Weight Painting&silk print
Product PCBA Name TDD-LTE FDD-LTE TD-SCDMA UMTS EDGE/GPRS TDD-LTE CA FDD-LTE CA
General Features
HW Basic information
CPUASR1826MTK7621DA
RAM CP: 1Gb LPDDR2 ; AP: 1Gb Embedded DDR3-1200 128MBytes (KGD)
ROM CP: 1Gb Nand flash ; AP: 1Gb Nand flash
Wifi 2,4G, 5G
Power features
Working Voltage DC jack: 12V/2A ;
Input Voltage range TBD
Battery NA
Working Power TBD
Max working Power TBD
Port/Interface
SIM
Form Factor
Voltage
others
OthersT-Flash Card NA
Key Key1: Restore; Key2: WPS; Key3 : Power
LCD/LED
1.4'LCD, 128*128
Signal strength(3 LED): White Power: White WIFI : White Net type(4G/3G/2G):Red+White LAN: White
USB
USB protocal USB 2.0 only for update SW USB port micro USBPower input NA
Power supply without Battery Not supportedRJ45 1000M x3 (LAN) ; 1000Mx1 (WAN/LAN)RJ11 NATS9 NA
AntennaWifi antenna PCB, 2.4G and 5G
RF Antenna Internal , compatible SMA*2 (External )
Environmental Characteristics
Extreme working temperature -5 ℃~+40℃
Storage Temperature -20℃~+70℃Operating humidity 5%~95% (non-condensing)
WAN
RF Capability
LTE Chipset ASR 1826
LTE Channel Bandwidth 1.4/3/5/10/15/20/40 MHz
ModulationDownlink QPSK/16-QAM/64-QAMUplink QPSK/16-QAM
LTE Authentication EPS-AKAAdaptive Modulation and Coding Supported
MIMO support Support both MIMO 4x4Idle Mode SupportedSleep Mode SupportedIdle Mode Signaling Reduction (ISR) Supported
Power Level
TDD-LTE Power Class 3(23 +/-3dBm)FDD-LTE Power Class 3(23 +/-3dBm)TD-SCDMA /
UMTS Power Class 3(23 +/-2dBm)EDGE /GPRS /
Sensitivity
TDD-LTE -94 dBm(20MHZ) @ 2 antennaFDD-LTE -93 dBm(20MHZ) @ 2 antennaTD-SCDMA /UMTS -106 dBm @ 1 antenna; some bands can be supported 2 antenna to improve sensitivityEDGE /GPRS /
Data Rate
FDD-LTE CA 3GPP R10 ,Category 6, DL 300Mbps UL 50MbpsTDD-LTE CA 3GPP R10 ,Category 6, DL 224Mbps UL 10MbpsTDD-LTE 3GPP R10 ,Category 4, DL 112Mbps UL 10MbpsFDD-LTE 3GPP R10 ,Category 4, DL 150Mbps UL 50MbpsTD-SCDMA /UMTS 3GPP R7 DL 21.6Mbps UL 5.76MbpsEDGE/GPRS /
�1
HKM-281 LED / 210*165.5*53mm TBD Standard
HKM-281 P28 40 01/3/8 / / / 40+40 /
LTE MIFI Serial SPEC
Certification
3GPP Conformance Compliance
UE Certification
Device Operator TA WithoutDevice Reginal Certificate Without
Device Country 1 Certificate Without
Device Country 2 Certificate WithoutWIFI Certificate NO
Battery general certificate Without
Battery country certificate Without
Charger Certificate WithoutLANWIFI Chipset MTK7603+7613 Certificated by All Operators
WIFI info
WLAN ModeFrequency Band
WLAN Channel supported
Antenna TypeSupported SecurityWIFI MIMO 2x2
Power Level
WIFI IEEE 802.11b(11M) 17dBmWIFI IEEE 802.11g(54M) 14dBmWIFI IEEE 802.11n(72.2M) 14dBmWIFI IEEE 802.11ac(433M) 14dBm
Sensitivity
WIFI IEEE 802.11b(11M) -80dBm@ 8%BERWIFI IEEE 802.11g(54M) -70dBm@ 10%BERWIFI IEEE 802.11n(72.2M) -68dBm@ 10%BERWIFI IEEE 802.11ac(433M) -55dBm@10%BER
Data Rate
WIFI IEEE 802.11b 11/5.5 /2/1 MbpsWIFI IEEE 802.11g 54/48/36/24/18/12/9/6 MbpsWIFI IEEE 802.11n(20M) 7.2/14.2/21.7/28.9/43.3/57.8/65/72.2/14.4/28.9/43.3/57.8/86.7/115.6/130/144.4 MbpsWIFI IEEE 802.11n(40M) 15/30/45/60/90/120/135/150/30/60/90/120/180/240/270/300 MbpsWIFI IEEE 802.11ac(80M) 32.5/65/97.5/130/195/260/292/325/390/433/65/130/195/260/390/520/585/650/780/867 Mbps
Reception range Coverage range indoor:15 m; outdoor:30mSystem
2G/3G/4G setup
Network SelectionManual, Auto SupportedSetup by user Supported
SMSSMS over SGs Func at LTE SupportedSMS's receiving and reading Supported
APN setup APN setup and revise SupportedPIN Func PIN:Save, revise, lock,unlock SupportedModem Func Connect to PC by USB SupportedAutomatically connect reconstructed Can automatically reconnect to network after off-network in data using Supported
WIFI setup Protocol
Max users 64 Supported
DHCP client / server, you can set whether to activate the DHCP service assigns IP addresses starting and ending addresses, set the gateway address; Support client list: Displays all the DHCP server to obtain IP address of the host, including MAC address, IP address obtained Supported
Support terminal IP address, SSID, communication channel, security type, the administrator account and password factory setting Supported
Support SSID and channel settings: Set SSID, communication channel (frequency band WiFi settings, select the range of WiFi support of the band all the available channels), WIFI function on/off, and the SSID broadcast on/off Supported
Provides WEP, WPA-WPA2 Mixed, WPA2-PSK, etc. SupportedSupport MAC and IP filtering Supported
Other setup
Driver setup With the PC operating system automatically recognizes, supports drivers installed automatically Partly Supported
Web Server WEB UI SupportedAdministrator password configuration Terminal preset default administrator password, supports password changes Supported
SW update Support local upgrade the firmware of the terminal SupportedTime setup Set user location's time SupportedRecovery Support the terminal restore all settings to the factory default state SupportedReboot Reboot by SW SupportedOperator lock Software locking(can customization hardware locking) SupportedOnline help This menu item provides the user with the help of the course, descriptive information SupportedHTTP upgrade Local HTTP server prefered SupportedOTA (HTTP/TR069) HTTP/TRO69 Supported
System Log Display system during operation log information generated. Easy for users to understand the equipment through query log system events that have occurred on. Allows the user to clear the log operation Supported
Connection-based HostlessPlug & Play Supported
PC OS
Win7/WinXP SupportedMAC OS SupportedWindows8 SupportedAndroid SupportedLINUX Supported
AccessoryCharger SupportedData cable SupportedPackage box & Label Supported
�2