lowe’s special order catalog special...schluter systems k.g. and licensed to schluter systems l.p....
TRANSCRIPT
5536
51
10
/201
3
© 2
013
Sch
lute
r S
yste
ms
L.P
.
All
prod
uct
nam
es a
re r
egis
tere
d tr
adem
arks
of S
chlu
ter
Sys
tem
s K
.G. a
nd li
cens
ed t
o S
chlu
ter
Sys
tem
s L.
P.
Schluter Systems L.P. • 194 Pleasant Ridge Road, Plattsburgh, NY 12901-5841 • Tel.: 800-267-1923 • Fax: 800-477-9783
www.schluter.com
Lowe’s Special Order Catalog
Installation Systems for Ceramic & Stone Tile
Effective January 10, 2014
All prior conditions of sale shall be deemed to be modified as hereinafter stated and the following conditions shall be deemed to supersede and control disputes or claims to goods.
1. Ownership of the PropertyOwnership of the products shall remain and vest with Schluter until full payment has been received with respect thereto.
2. DeliveryIf Schluter is prevented from carrying out the provisions hereof by reason of any acts of God, war, revolution, strike, riot, earthquake, delay by carrier, fuel shortage, embargo, lockout or other labour disturbance, the operations of statute of law, interference of civil or military authority or any other event beyond its control, interfering with the production or delivery of the products as herein contemplated, Schluter shall be exonerated from and shall not be liable for any loss or damage arising from any of the foregoing and shall be further excused from making deliveries to the extent of such interference and shall have, in addition to the foregoing and without prejudice thereto, the absolute right to cancel any purchase orders with respect to any of the products therein described or with respect to any part thereof without any liability of any nature whatsoever attaching to itself other than the obligation to reimburse and return any payments of monies made in advance for the products which shall not be delivered for the reasons hereinabove set forth. Any delivery not in dispute shall be paid for regardless of any other existing disputes between Schluter and the Buyer relating to other delivered or undelivered products.
3. Inspection and SampleThe Buyer shall have the right to inspect the products upon delivery of same. Failure by the Buyer to inspect the said products and specify in writing to Schluter any defective products shall constitute on the Buyer’s part an absolute and unconditional waiver of the Buyer’s right to reject the products and shall be deemed an acceptance by the Buyer of the products as to quality and/or quantity of same. Any samples of the products shown to the Buyer prior to placement of any order with Schluter are for the sole purpose and intent of exhibiting to the Buyer the type of products which may be the subject matter of an order by the Buyer. Such samples create no warranty on the part of Schluter, implied or otherwise, that the said products ultimately forming the subject matter of an order placed by the Buyer necessarily shall conform with the samples referred to above.
4. ClaimsAny claim for damage, short shipment, misdelivery or defects of the products must be specified in writing on the delivery slip and brought to the attention of Schluter at the time of delivery. If no claim is made by the Buyer at the time of receipt of the products, then the right to make such claim or the right to reject any or all of the products shall be waived by the Buyer. At its option, Schluter will either replace such products that are proven defective or allow credit for them.
5. InstallationSchluter shall in no way be responsible for any claims resulting from the installation or finishing of the products.
6. LiabilitySchluter is not liable and/or responsible toward any third party and/or Buyer, as the case may be, for any damage and/or loss of any nature or kind howsoever arising, resulting directly or indirectly from the use of the products in a manner not in conformity with the instructions accompanying same and in effect with respect thereto and/or resulting from the products being improperly used for which the products were not intended. Prior to any use of products, the user and/or Buyer has the prior obligation to verify the suitability of the products for their intended use and the Buyer shall assume all risks and responsibility with respect thereto.
Schluter’s responsibility and liability with respect to defective products and/or work attaching thereto shall be confined solely to the replacement and/or repair of same. In addition to the foregoing, Schluter shall alternatively have the right to reimburse the Buyer the purchase price paid with respect thereto rather than to replace and/or repair the defective products.
7. AcceptanceInstallation and/or use of the products by the Buyer shall constitute an irrevocable acceptance of the products. Failure to reject the products in the manner and within the time period stipulated in paragraphs 4 and 5 hereof shall be deemed to constitute an acceptance of the products.
8. CancellationOrders are not subject to cancellation or deferment of shipment unless Schluter is indemnified against the loss resulting therefrom. Schluter shall not be responsible for delays or non-performance caused by strikes, fires or other causes beyond its control, as the whole is stipulated in paragraph 3 hereof. Orders entered on Schluter’s order book cannot be cancelled or changed without Schluter’s prior written consent and then only on the terms which will indemnify Schluter against all loss. No cancellations will be accepted or allowed after the order has been shipped from our warehouse.
10. Modifications of ConditionsNo modifications of the conditions can be made without the prior written authorization from a representative of Schluter.
C O N D I T I O N S O F S A L E
To access your Lowe’s item number and pricing please check your electronic catalog or go to lowes.com.
Example:
Model # PRO80SP
The Schluter® Virtual HouseA home is more than a roof over your head. It is a place to raise a family, entertain friends and relatives, practice your favorite hobbies, cook your signature dishes, and relax in a hot bubble bath.
As a leader in the tile industry, Schluter®-Systems develops the best products to ensure the functionality, durability, and comfort of home.
The Schluter® Virtual House is a state-of-the-art educational website that allows you to navigate through the rooms of a house in a three-dimensional interactive environment and discover a variety of tile installations and applications.
Each tile project offers you three sections: LEARN, CHOOSE, and BUILD.
The LEARN section is the educational portion of the Virtual House that you should visit before starting your project. This section contains videos and documents on tile-related subjects such as uncoupling, waterproofing, substrates, and the benefits of using tile.
The CHOOSE section is the interactive showroom where you can select the appropriate products for the project you have chosen.
Once you’ve learned about your tile project and chosen the materials you’ll need, you are ready for the BUILD section where you’ll find installation videos and tips to complete your project.
With these three simple steps, the Schluter® Virtual House helps you become the master of your tile project.
www.schluterhouse.com
Material
A = AluminumAC = Color-coated aluminumACB = Bright chrome anodized aluminum
AM = Satin brass anodized aluminumAMB = Bright brass anodized aluminumAMG = Polished brass anodized aluminumAMGB = Brushed brass anodized aluminum
AE = Satin anodized aluminumACG = Polished chrome anodized aluminumACGB = Brushed chrome anodized aluminum
AK = Satin copper/bronze anodized aluminumAKB = Bright copper/bronze anodized aluminumAKG = Polished copper/bronze anodized aluminumAKGB = Brushed copper/bronze anodized aluminum
ABGB = Brushed antique bronze anodized aluminum
AGR = Graphite anodized aluminumAGRB = Brushed graphite anodized aluminumAGSG = Bright black anodized aluminum
AGSB = Brushed black anodized aluminum
AT = Satin nickel anodized aluminumATB = Bright nickel anodized aluminumATG = Polished nickel anodized aluminumATGB = Brushed nickel anodized aluminum
TSB = Tuscan beige color-coated aluminumTSOB = Tuscan bronze color-coated aluminumTSG = Tuscan pewter color-coated aluminum
E = Stainless steelEB = Brushed stainless steel
M = Solid brassMC = Chrome-plated solid brass
P = PVC
Symbols
H = Height of tileL = Lengthmil = Thickness in milsmm = Millimetersin. = InchesØ = Diameter
BW Bright whiteRAL 9001
W WhiteRAL 9010
SP Sand pebbleRAL N/A
BH BahamaRAL N/A
HB Light beigeRAL N/A
NB Nut brownRAL N/A
RB Red brownRAL 8003
ZR Brick redRAL 8004
SB Black brownRAL 8019
GS BlackRAL 9011
HG Light greyRAL 7035
PG Classic greyRAL N/A
G GreyRAL 7030
CG YellowRAL 1021
Note: Colors referenced are not available for all products.
L E G E N DC O L O R T A B L E
Stainless Steel: Can withstand high levels of mechanical stress, and is especially suited for areas of application where resistance to chemicals and acids is necessary.
Solid Brass: Can withstand high levels of mechanical stress, making it ideal for transitions subjected to heavy traffic, including exposure to wheel loads (for example: carpet to marble in hotel lobbies or industrial settings). Brass is resistant to most chemicals commonly used in tiled environments. Note: While solid brass is highly resistant to most common chemicals, it will oxidize, resulting in a natural patina. In areas exposed to moisture or aggressive substances, heavy oxidation and spotting may occur. Common brass cleaners can be used to clean the profile.
Mill-finished Aluminum: Provides effective edge protection for residential and light commercial applications where minimum exposure to moisture and chemicals is expected. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminum is sensitive to alkaline materials, it is important to remove mortar or grout residue from visible surfaces.
Anodized Aluminum: The anodized layer creates a durable finish that retains a uniform appearance over a long period of time. Anodized aluminum provides added protection against the corrosive effects of moisture. Any anodized finish is susceptible to scratching and wear.
Color-coated Aluminum: This pretreated aluminum is color-coated with a polyurethane powder coat. The coating is color-stable, UV-resistant, and suitable for exterior use. Not suitable for corners or transitions subjected to heavy mechanical stresses (for example: at step edges or floor transitions).
PVC: Moisture resistant. Made of rigid PVC, which resists bending or scratching. It is also UV-resistant, though not permanently color-stable, in exterior applications. Not suited for corners or transitions subjected to heavy mechanical stresses (for example: at step edges or floor transitions).
M A T E R I A L A P P L I C A T I O N S
Material Floor Wall
Stainless SteelSolid BrassMill-finished AluminumAnodized AluminumColor-coated AluminumPVC
Heavy Duty
Light Duty
Chemical Resistance
Moisture Resistance
STAINLESS STEEL, CHROME-PLATED BRASS, AND SOLID BRASS
E Stainless steel 304 (1.4301=V2A) High-grade stainless steel 316 L (1.4404=V4A)
ANODIZED ALUMINUM
Polished and bright anodized aluminum
ACG Polished chromeACB Bright chrome
Brushed anodized aluminum
ACGB Brushed chrome
Satin anodized aluminum
AE Satin
EB Brushed stainless steel MC Chrome-plated solid brass
AMG Polished brass AMB Bright brass
AMGB Brushed brass
AT Satin nickel
AKG Polished copper/bronze
AKB Bright copper/bronze
AKGB Brushed copper/bronze
AK Satin copper/bronze
ATG Polished nickelATB Bright nickel
ATGB Brushed nickel
AM Satin brass
M Solid brass
AGR Graphite
ABGB Brushed antique bronze
AGRB Brushed graphite
AGSG Bright black
AGSB Brushed black
TSB Tuscan beige TSG Tuscan pewterTSOB Tuscan bronze
COLOR-COATED ALUMINUM - TUSCAN INSPIRATIONS
E A S I E R I N S T A L L A T I O N W I T H T H ESchluter® I N T E G R A T E D J O I N T S P A C E R
CONTENTS
Finishing, edge-protection & transition profiles for floors 8 - 17
Finishing & edge-protection profiles for walls & countertops 18 - 39
Stair-nosing profiles 40 - 45
Movement joint & cove-shaped profiles 46 - 59
Waterproofing, uncoupling, & drainage membranes 62 - 63
Shower system 64 - 79
H =Schluter® IntegratedJoint Spacer
Tile or Stone
www.schluter .com
Customer support: 800-267-1923
1. Select the height of profile (H) according to the tile thickness (ie. 3/8" tile = 3/8" profile).
2. Press the perforated anchoring leg of the profile into the tile adhesive and align. Trowel additional adhesive over the leg.
3. Set the tile flush with the profile. The integrated joint spacer establishes a small, uniform joint (approximately 1/16"), to be filled when grouting.
60 - 61Schluter®-KERDI-BOARD
7For information or to place an order, please call: 800-267-1923
PRODUCT LIST IN ALPHABETICAL ORDER
Schluter®-DECO 12
Schluter®-DECO-DE 36
Schluter®-DESIGNLINE 35
Schluter®-DILEX-AHK 54 - 55
Schluter®-DILEX-AHKA 56
Schluter®-DILEX-AKWS 50
Schluter®-DILEX-AS 50
Schluter®-DILEX-BT 49
Schluter®-DILEX-BWA 51
Schluter®-DILEX-BWB 48
Schluter®-DILEX-BWS 47
Schluter®-DILEX-EDP 48
Schluter®-DILEX-EHK 58
Schluter®-DILEX-EKE 52
Schluter®-DILEX-EZ 6 + 9 47
Schluter®-DILEX-HK 53
Schluter®-DILEX-HKU 59
Schluter®-DILEX-HKW 52
Schluter®-DILEX-KSA 51
Schluter®-DILEX-KSN 49
Schluter®-DILEX-PHK 57
Schluter®-DITRA 62
Schluter®-DITRA-XL 62
Schluter®-DITRA-ROLLER 79
Schluter®-DITRA-TROWEL 63
Schluter®-ECK-E 37
Schluter®-ECK-K 38
Schluter®-ECK-KI 38
Schluter®-ECK-KHK 39
Schluter®-JOLLY 11, 19-20
Schluter®-KERDI 65
Schluter®-KERDI-BAND 65
Schluter®-KERDI-BOARD 61
Schluter®-KERDI-BOARD-SN 61
Schluter®-KERDI-BOARD-ZT/-ZS 61
Schluter®-KERDI-DRAIN 67 - 70
Schluter®-KERDI-FIX 66
Schluter®-KERDI-FLEX 63
Schluter®-KERDI-KERECK-F 66
Schluter®-KERDI-KM 66
Schluter®-KERDI-LINE 76 - 77
Schluter®-KERDI-LINE-FC 79
Schluter®-KERDI-SEAL 66
Schluter®-KERDI-SHOWER-L/-LS 78
Schluter®-KERDI-SHOWER-SB 72
Schluter®-KERDI-SHOWER-SC 71
Schluter®-KERDI-SHOWER-SR 71
Schluter®-KERDI-SHOWER-ST 71
Schluter®-KERDI-SHOWER-KIT 73 - 75
Schluter®-KERDI-TROWEL 65
Schluter®-QUADEC 21 - 22
Schluter®-QUADEC-K 23
Schluter®-QUADEC-FS 24
Schluter®-REMA 36
Schluter®-RENO-RAMP 16
Schluter®-RENO-RAMP-K 16
Schluter®-RENO-T 12
Schluter®-RENO-TK 13 - 14
Schluter®-RENO-U 15
Schluter®-RENO-V 17
Schluter®-RONDEC 24 - 32
Schluter®-RONDEC-CT 33
Schluter®-RONDEC-DB 35
Schluter®-RONDEC-STEP 34 & 42
Schluter®-SCHIENE 9 - 10
Schluter®-SCHIENE-STEP 43
Schluter®-SHOWERPROFILE-R 79
Schluter®-SHOWERPROFILE-S 78
Schluter®-SNIPS 79
Schluter®-TREP-E/-EK 43
Schluter®-TREP-FL 41
Schluter®-TREP-G/GK 44
Schluter®-TREP-SE/-S/-B 45
Schluter®-TREP-T/-TL 41
Schluter®-TREP-TAP 45
Schluter®-TROBA 63
Schluter®-TROBA-PLUS 63
8 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R S
Schluter®-RENO-U Schluter®-RENO-TK
Schluter®-SCHIENE
9For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R S
= H
3/32"
Stainless steel *
Schluter®-SCHIENE
Multiple spacer design
H = 17/32" - 1- 3/16"
1/8"
H = 3/32" - 3/16"H = 1/4" - 1/2"
1/8"
Single spacer design
Schluter®-SCHIENE is a special profile that finishes and protects the edges of tiled surfaces of the same height. However, it can also be used in conjunction with other covering materials and applications. The integrated joint spacer creates a channel for grouting the tile.
(Technical data sheet available at schluter.com)
* The Schluter®-SCHIENE in stainless steel does not have an integrated joint spacer.
Note: The design configuration of Schluter®-SCHIENE is identical to that of Schluter®-JOLLY. However, their materials and finishes do vary. Schluter®-JOLLY is suited primarily for walls and countertops. However JOLLY in AM, AMGB, AK, AT, ATGB and ACGB is also suitable for floors, and may be used in such applications to increase design options. Please refer to page 19.
Finishes: Stainless steel 304(1.4301 = V2A) (E)
Brushed stainless steel 304 (1.4301 = V2A) (EB)
Solid brass (M)
Aluminum (A)
Satin anodized aluminum (AE)
H = tile thickness Item No. Item No. Item No. Item No. Item No.
3/32 E20 - - A20 AE201/8 E30 - M30 A30 AE303/16 E45 - M45 A45 AE451/4 E60 E60EB M60 A60 AE609/32 E70 - - A70 AE705/16 E80 E80EB M80 A80 AE8011/32 E90 - M90 A90 AE903/8 E100 E100EB M100 A100 AE1007/16 E110 E110EB M110 A110 AE1101/2 E125 E125EB M125 A125 AE12517/32 E140 - - A140 AE1409/16 E150 - M150 A150 AE1505/8 E160 - M160 A160 AE16011/16 E175 - M175 A175 AE1753/4 E200 - M200 A200 AE20013/16 - - - A210 AE2107/8 E225 - M225 A225 AE2251 E250 - M250 A250 AE2501-1/16 - - - A275 AE2751-3/16 E300 - M300 A300 AE300
Finishes: Bright chrome
anod. alu. (ACB)Bright nickel
anod. alu. (ATB)Bright copper/bronze
anod. alu. (AKB)Bright brass
anod. alu. (AMB)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 A60ACB A60ATB A60AKB A60AMB5/16 A80ACB A80ATB A80AKB A80AMB3/8 A100ACB A100ATB A100AKB A100AMB1/2 A125ACB A125ATB A125AKB A125AMB
10 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R S
Schluter®-SCHIENE-RADIUSSchluter®-SCHIENE-RADIUS is an extruded profile with special perforations, for finishing and protecting the edges of curved tile coverings. SCHIENE-RADIUS provides edge protection while enhancing the aesthetic appearance of a curved design, including curved tile-to-tile transitions and curved outside wall corners, as well as curved designs in other surface coverings. Due to its special perforations, even curves with small radiuses are possible.
(Technical data sheet available at schluter.com)
R = Radius
Finishes: Stainless steel 304(1.4301 = V2A) (E)
Brushed stainless steel 304 (1.4301 = V2A) (EB)
Solid brass (M)
Aluminum (A)
Satin anodized aluminum (AE)
H = tile thickness Item No. Item No. Item No. Item No. Item No.
3/32 R/E20 - - R/A20 R/AE201/8 R/E30 - R/M30 R/A30 R/AE303/16 R/E45 - R/M45 R/A45 R/AE451/4 R/E60 R/E60EB R/M60 R/A60 R/AE609/32 R/E70 - - R/A70 R/AE705/16 R/E80 R/E80EB R/M80 R/A80 R/AE8011/32 R/E90 - R/M90 R/A90 R/AE903/8 R/E100 R/E100EB R/M100 R/A100 R/AE1007/16 R/E110 - R/M110 R/A110 R/AE1101/2 R/E125 R/E125EB R/M125 R/A125 R/AE12517/32 R/E140 - - R/A140 R/AE1409/16 R/E150 - R/M150 R/A150 R/AE1505/8 R/E160 - R/M160 R/A160 R/AE16011/16 R/E175 - R/M175 R/A175 R/AE1753/4 R/E200 - R/M200 R/A200 R/AE20013/16 - - - R/A210 R/AE2107/8 R/E225 - R/M225 R/A225 R/AE2251 R/E250 - R/M250 R/A250 R/AE2501-1/16 - - - R/A275 R/AE2751-3/16 R/E300 - - R/A300 R/AE300
Finishes: Bright chrome
anod. alu. (ACB)Bright nickel
anod. alu. (ATB)Bright copper/bronze
anod. alu. (AKB)Bright brass
anod. alu. (AMB)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 R/A60ACB R/A60ATB R/A60AKB R/A60AMB5/16 R/A80ACB R/A80ATB R/A80AKB R/A80AMB3/8 R/A100ACB R/A100ATB R/A100AKB R/A100AMB1/2 R/A125ACB R/A125ATB R/A125AKB R/A125AMB
11For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R S
Schluter®-JOLLY (Anodized aluminum)The design configuration of Schluter®-SCHIENE is identical to that of Schluter®-JOLLY. However, their materials and finishes do vary. Schluter®-JOLLY is suited primarily for walls and countertops. However, JOLLY in AM, AMGB, AK, AKGB, AT, ATGB, ACGB, and ABGB is also suitable for floors, and may be used in such applications to increase design options.
(Technical data sheet available at schluter.com)
= H
1/8"
Finishes: Brushed chrome anod. alu. (ACGB)
Satin nickel anod. alu. (AT)
Brushed nickel anod. alu. (ATGB)
Satin copper/bronze anod. alu. (AK)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 A60ACGB A60AT A60ATGB A60AK5/16 A80ACGB A80AT A80ATGB A80AK3/8 A100ACGB A100AT A100ATGB A100AK1/2 A125ACGB A125AT A125ATGB A125AK
Finishes: Brushed copper/bronze anod. alu. (AKGB)
Brushed antique bronze anod. alu. (ABGB)
Satin brass anod. alu. (AM)
Brushed brass anod. alu. (AMGB)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 A60AKGB A60ABGB A60AM A60AMGB5/16 A80AKGB A80ABGB A80AM A80AMGB3/8 A100AKGB A100ABGB A100AM A100AMGB1/2 A125AKGB A125ABGB A125AM A125AMGB
Finishes: Brushed chrome anod. alu. (ACGB)
Satin nickel anod. alu. (AT)
Brushed nickel anod. alu. (ATGB)
Satin copper/bronze anod. alu. (AK)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 R/A60ACGB R/A60AT R/A60ATGB R/A60AK5/16 R/A80ACGB R/A80AT R/A80ATGB R/A80AK3/8 R/A100ACGB R/A100AT R/A100ATGB R/A100AK1/2 R/A125ACGB R/A125AT R/A125ATGB R/A125AK
Finishes: Brushed copper/bronze anod. alu. (AKGB)
Brushed antique bronze anod. alu. (ABGB)
Satin brass anod. alu. (AM)
Brushed brass anod. alu. (AMGB)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 R/A60AKGB R/A60ABGB R/A60AM R/A60AMGB5/16 R/A80AKGB R/A80ABGB R/A80AM R/A80AMGB3/8 R/A100AKGB R/A100ABGB R/A100AM R/A100AMGB1/2 R/A125AKGB R/A125ABGB R/A125AM R/A125AMGB
Schluter®-JOLLY RADIUSSchluter®-JOLLY RADIUS is an extruded profile with special perforations, for finishing and protecting the edges of curved tile coverings. JOLLY RADIUS provides edge protection while enhancing the aesthetic appearance of a curved design, including curved tile-to-tile transitions and curved outside wall corners, as well as curved designs in other surface coverings. Due to its special perforations, even curves with small radiuses are possible.
(Technical data sheet available at schluter.com)
R = Radius
12 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R SF I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R S
Schluter®-DECOSchluter®-DECO has a 1/4"-wide visible surface for creating decorative joint designs in tiled surfaces.
(Technical data sheet available at schluter.com)
= H
1/4"
Aluminum and MC80D
Schluter®-RENO-TSchluter®-RENO-T is retrofitted to adjoin different types of floor coverings of the same height.
(Technical data sheet available at schluter.com)Stainless steel
Aluminum, Brass
11/32"
W
11/32"
W
Schluter®-DECO profiles can be produced with a special perforated anchoring leg to radius the profile:
• Available in all materials except stainless steel. • Call for pricing • For more information, please call Customer Support • Item No.: R / Profile No. (e.g., R/AE80D)
R = Radius
Finishes: Stainless steel 304 (1.4301 = V2A) (E)
Solid brass(M)
Chrome-platedsolid brass (MC)
Satin anodized aluminum (AE)
H = tile thickness Item No. Item No. Item No. Item No.
5/16 E80D - MC80D AE80D11/32 E90D M90D MC90D -3/8 E100D - - AE100D7/16 E110D M110D MC110D -1/2 E125D M125D MC125D AE125D17/32 E140D - - -5/8 E160D - - -23/32 E185D - - -13/16 E210D - - -1 E250D - - -1-3/16 E300D - - -
Finishes: Satin nickelanod. alu. (AT)
Satin copper/bronzeanod. alu. (AK)
Satin brass anod. alu. (AM)
W = in. Item No. Item No. Item No.
17/32 T9/14AT T9/14AK T9/14AM1 T9/25AT T9/25AK T9/25AM
Finishes: Stainless steel 304 (1.4301 = V2A) (E)
Brushed stainless steel 304 (1.4301 = V2A) (EB)
Solid brass (M)
Satin anodized aluminum (AE)
W = in. Item No. Item No. Item No. Item No.
17/32 T9/14E T9/14EB T9/14M T9/14AE1 T9/25E T9/25EB T9/25M T9/25AE
Stainless steel
1/4"
= H
1/4"
= H
Brass
13For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R S
Finishes: Stainless steel 304 (1.4301 = V2A) (E)
Brushed stainless steel 304 (1.4301 = V2A) (EB)
Solid brass (M)
H = tile thickness Item No. Item No. Item No.
5/16 ETK80 EBTK80 MTK803/8 ETK100 EBTK100 MTK1007/16 ETK110 EBTK110 -1/2 ETK125 EBTK125 MTK125
Finishes: Satin anodized aluminum (AE)
Bright chromeanod. alu. (ACB)
Satin nickelanod. alu. (AT)
Brushed nickelanod. alu. (ATGB)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 AETK60 ATK60ACB ATK60AT -5/16 AETK80 ATK80ACB ATK80AT ATK80 ATGB3/8 AETK100 ATK100ACB ATK100AT ATK100ATGB1/2 AETK125 ATK125ACB ATK125AT ATK125ATGB
Finishes: Satin copper/bronzeanod. alu. (AK)
Brushed copper/bronzeanod. alu. (AKGB)
Brushed antique bronzeanod. alu. (ABGB)
Bright brassanod. alu. (AMB)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 ATK60AK - - ATK60AMB5/16 ATK80AK ATK80AKGB ATK80ABGB ATK80AMB3/8 ATK100AK ATK100AKGB ATK100ABGB ATK100AMB1/2 ATK125AK ATK125AKGB ATK125ABGB ATK125AMB
F I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R S
Aluminum
Schluter®-RENO-TKSchluter®-RENO-TK provides a smooth transition between tiled surfaces and lower neighboring floor coverings. In addition, the edge of the adjacent floor covering is effectively protected.
(Technical data sheet available at schluter.com)
Stainless steel, Brass Aluminum
1/4"
ADA-Compliant
= 5/16" - 1/2" H = 1/4"1/4"
H = 5/16" - 3/8"1/4"
Aluminum
H = 1/2"
1/4"
Diagram Values
H = in.LB = in.
Aluminum Stainless steel/Brass
1/4 19/64 -5/16 21/64 9/323/8 21/64 7/167/16 - 17/321/2 39/64 21/32
= H1/4"
LB
14 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R S
Finishes: Solid brass (M)
Satin anodized aluminum (AE)
Bright chromeanod. alu. (ACB)
Satin nickelanod. alu. (AT)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 - R/AETK60 R/ATK60ACB R/ATK60AT5/16 R/MTK80 R/AETK80 R/ATK80ACB R/ATK80AT3/8 R/MTK100 R/AETK100 R/ATK100ACB R/ATK100AT
Schluter®-RENO-TK-RADIUSSchluter®-RENO-TK-RADIUS has a special perforated anchoring leg to radius the profile.
AluminumAluminum
H = 1/4"1/4"
H = 5/16" - 3/8"1/4"
R = Radius
H = 5/16" - 1/2"1/4"
Brass
Finishes: Brushed nickelanod. alu. (ATGB)
Satin copper/bronzeanod. alu. (AK)
Brushed copper/bronzeanod. alu. (AKGB)
Brushed antique bronzeanod. alu. (ABGB)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 - R/ATK60AK - -5/16 R/ATK80ATGB R/ATK80AK R/ATK80AKGB R/ATK80ABGB3/8 R/ATK100ATGB R/ATK100AK R/ATK100AKGB R/ATK100ABGB
Finishes: Bright brassanod. alu. (AMB)
H = tile thickness Item No.
1/4 R/ATK60AMB5/16 R/ATK80AMB3/8 R/ATK100AMB
ADA-CompliantDiagram Values
H = in.LB = in.
Aluminum Stainless steel/Brass
1/4 19/64 -5/16 21/64 9/323/8 21/64 7/16
= H1/4"
LB
15For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R S
ADA-Compliant
Note: Sizes 3/4", 9/16", and 11/16" are not ADA-compliant.
Aluminum
Schluter®-RENO-USchluter®-RENO-U provides a smooth transition between floor coverings of different heights.
(Technical data sheet available at schluter.com)
Stainless steel, Brass Aluminum
= H 5/32"H = 1/8"
5/32"
Aluminum
H = 1/2" - 3/4"5/32"H = 5/16" - 3/8"
Finishes: Stainless steel 304 (1.4301 = V2A) (E)
Brushed stainless steel 304 (1.4301 = V2A) (EB)
Solid brass (M)
Satin anodized aluminum (AE)
H = tile thickness Item No. Item No. Item No. Item No.
1/8 - - - AEU355/16 EU80 EBU80 MU80 AEU803/8 EU100 EBU100 MU100 AEU1007/16 EU110 EBU110 - -1/2 EU125 EBU125 MU125 AEU1259/16 EU150 EBU150 MU150 AEU15011/16 EU175 EBU175 - AEU1753/4 EU200 EBU200 - -
Finishes: Bright chromeanod. alu. (ACB)
Satin nickelanod. alu. (AT)
Brushed nickelanod. alu. (ATGB)
Satin copper/bronzeanod. alu. (AK)
H = tile thickness Item No. Item No. Item No. Item No.
5/16 AU80ACB AU80AT AU80ATGB AU80AK3/8 AU100ACB AU100AT AU100ATGB AU100AK1/2 AU125ACB AU125AT AU125ATGB AU125AK
Finishes: Brushed copper/bronzeanod. alu. (AKGB)
Brushed antique bronzeanod. alu. (ABGB)
Satin brassanod. alu. (AM)
Bright brassanod. alu. (AMB)
H = tile thickness Item No. Item No. Item No. Item No.
5/16 AU80AKGB AU80ABGB AU80AM AU80AMB3/8 AU100AKGB AU100ABGB AU100AM AU100AMB1/2 AU125AKGB AU125ABGB AU125AM AU125AMB
Finishes: Tuscan bronze color-coated alu. (TSOB)
H = tile thickness Item No.
5/16 AU80TSOB3/8 AU100TSOB1/2 AU125TSOB
Diagram Values
H = in.LB = in.
Aluminum Stainless steel/Brass
1/8 23/64 -5/16 31/64 33/643/8 21/32 11/167/16 - 49/641/2 55/64 29/329/16 1-5/64 1-7/6411/16 1-1/16 1-5/163/4 1-15/64 1-37/64
= H
5/32"
LB
16 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R S
ADA-Compliant
Note: Sizes 9/16" and 3/4" are not ADA-compliant.
Schluter®-RENO-RAMP/-KSchluter®-RENO-RAMP/-K create a gradual transition between tiled surfaces and lower neighboring floor coverings. Ideal for commercial applications where wheel carts are used, e.g., bakeries, hospitals, etc.
RENO-RAMP has an anchoring leg which is embedded in the tile bond coat.
RENO-RAMP-K is subsequently bonded adjacent to existing floor coverings.
(Technical data sheet available at schluter.com)
= H
LB
Schluter®-RENO-RAMP
Finish Satin anodized aluminum (AE)
H = tile thickness Item No.
B = 2"1/4 AERP60B50B = 2-1/2"3/8 AERP100B651/2 AERP125B65B = 3-1/2"1/2 AERP125B909/16 AERP150B903/4 AERP200B90
Schluter®-RENO-RAMP-K
Finish Satin anodized aluminum (AE)
H = tile thickness Item No.
B = 2-1/2"1/2 AERPK125B65
B= 2-1/2"
= H
= B
Diagram Values
H = in. LB = in.
1/4 2 3/8 2-1/2 1/2 2-1/2 1/2 3-1/2 9/16 3-1/2 3/4 3-1/2
= H
LBNew product
17For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R S
Schluter®-RENO-VSchluter®-RENO-V is a variable transition profile for smoothly joining floor coverings of different heights. The profile consists of two components: the support profile and the variable transition leg.
(Technical data sheet available at schluter.com)
= B
= H
= H
B = 3/4" or 1-3/16" or 1-9/16"
3/16"
Finishes: Satin anodized aluminum(AE)
Satin brass anodized aluminum (AM)
H = tile thickness Item No. Item No.
Ramp length B20 - 3/4"5/16 AEVT80B20 AVT80B20AM3/8 AEVT100B20 AVT100B20AM1/2 AEVT125B20 AVT125B20AM9/16 AEVT150B20 AVT150B20AM11/16 AEVT175B20 AVT175B20AM3/4 AEVT200B20 AVT200B20AM
Ramp length B30 - 1-3/16"5/16 AEVT80B30 AVT80B30AM3/8 AEVT100B30 AVT100B30AM1/2 AEVT125B30 AVT125B30AM9/16 AEVT150B30 AVT150B30AM11/16 AEVT175B30 AVT175B30AM3/4 AEVT200B30 AVT200B30AM
Ramp length B40 - 1-9/16"5/16 AEVT80B40 AVT80B40AM3/8 AEVT100B40 AVT100B40AM1/2 AEVT125B40 AVT125B40AM9/16 AEVT150B40 AVT150B40AM11/16 AEVT175B40 AVT175B40AM3/4 AEVT200B40 AVT200B40AM
18 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Schluter®-JOLLY Schluter®-RONDEC-CT
Schluter®-QUADEC
19For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Note: Schluter®-JOLLY profiles can be produced with a special perforated anchoring leg to radius the profile:
• Available in metal profiles only • Polished aluminum and chrome-plated brass require a relatively large bending radius.• Call for pricing • For more information, please call Customer Support • Item No.: R / Profile No. (e.g., R/A60AT)
R = Radius
Schluter®-JOLLY (Anodized aluminum & Chrome-plated brass)Schluter®-JOLLY finishes and protects outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile. Note: The design configuration of Schluter®-JOLLY is identical to that of Schluter®-SCHIENE. However, their materials and finishes do vary. Schluter®-SCHIENE is suited primarily for floors. However SCHIENE in M, E, EB, and AE is also suitable for walls, and may be used in such applications to increase design options. Please refer to page 9.
(Technical data sheet available at schluter.com)
= H
1/8"
Finishes: Chrome-plated solid brass (MC)
Polished chrome anod. alu. (ACG)
Brushed chrome anod. alu. (ACGB)
Satin nickel anod. alu. (AT)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 MC60 A60ACG A60ACGB A60AT5/16 MC80 A80ACG A80ACGB A80AT3/8 MC100 A100ACG A100ACGB A100AT1/2 MC125 A125ACG A125ACGB A125AT
Finishes: Polished nickel anod. alu. (ATG)
Brushed nickel anod. alu. (ATGB)
Satin copper/bronze anod. alu. (AK)
Polished copper/bronze anod. alu. (AKG)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 A60ATG A60ATGB A60AK A60AKG5/16 A80ATG A80ATGB A80AK A80AKG3/8 A100ATG A100ATGB A100AK A100AKG1/2 A125ATG A125ATGB A125AK A125AKG
Finishes: Brushed copper/bronze anod. alu. (AKGB)
Brushed antique bronze anod. alu. (ABGB)
Satin brass anod. alu. (AM)
Polished brass anod. alu. (AMG)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 A60AKGB A60ABGB A60AM A60AMG 5/16 A80AKGB A80ABGB A80AM A80AMG3/8 A100AKGB A100ABGB A100AM A100AMG1/2 A125AKGB A125ABGB A125AM A125AMG
Finishes: Brushed brass anod. alu. (AMGB)
Brushed graphite anod. alu. (AGRB)
Bright black anod. alu. (AGSG)
H = tile thickness Item No. Item No. Item No.
3/16 - - A45AGSG1/4 A60AMGB A60AGRB A60AGSG 5/16 A80AMGB A80AGRB A80AGSG3/8 A100AMGB A100AGRB A100AGSG1/2 A125AMGB A125AGRB A125AGSG
20 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Schluter®-JOLLY (Color-coated aluminum & PVC)Schluter®-JOLLY finishes and protects outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.
(Technical data sheet available at schluter.com)
H = 1/4" - 1/2"
1/8"
PVC
COLOR-COATED ALUMINUM
Note: JOLLY in color-coated aluminum is no longer available in Black (GS). For a black finish, the profile is available in Bright black anodized aluminum (AGSG). See page 19.
*Color Codes
HBLightbeige
BWBright white
HGLightgrey
WWhite
PGClassicgrey
SPSandpebble
GGrey
BHBahama
GSBlack
RBRed brown
SBBlack brown
H = 1/8" - 3/16"
H = tile thickness
Bright white White Sand pebble Bahama Light beige
Item No.
1/8 A30BW A30W A30SP A30BH A30HB3/16 A45BW A45W A45SP A45BH A45HB1/4 A60BW A60W A60SP A60BH A60HB5/16 A80BW A80W A80SP A80BH A80HB3/8 A100BW A100W A100SP A100BH A100HB1/2 A125BW A125W A125SP A125BH A125HB
H = tile thickness
Light grey Classic grey Grey Red brown Black brown
Item No.
1/8 A30HG A30PG A30G - -3/16 A45HG A45PG A45G - -1/4 A60HG A60PG A60G - -5/16 A80HG A80PG A80G A80RB A80SB3/8 A100HG A100PG A100G A100RB A100SB1/2 A125HG A125PG A125G A125RB A125SB
H = tile thickness
Bright white White Sand pebble Bahama Light beige
Item No.
3/16 BW45 W45 SP45 BH 45 HB451/4 BW60 W60 SP60 BH 60 HB605/16 BW80 W80 SP80 BH 80 HB803/8 BW100 W100 SP100 BH 100 HB1001/2 BW125 W125 SP125 BH 125 HB125
H = tile thickness
Light grey Classic grey Grey Black
Item No.
3/16 HG45 PG45 G45 GS451/4 HG60 PG60 G60 GS605/16 HG80 PG80 G80 GS803/8 HG100 PG100 G100 GS1001/2 HG125 PG125 G125 GS125
21For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Schluter®-QUADECSchluter®-QUADEC is a square profile designed to protect and decorate outside wall corners, tile bases, and other tiled edges, e.g., tiled skirting. QUADEC can also be used as an accent within tile fields on both floors and walls. This profile allows for modern decorative design and interesting contrasts. The integrated joint spacer creates a channel for grouting the tile.Note: Schluter®-QUADEC in stainless steel does not have an inte-grated joint spacer.(Technical data sheet available at schluter.com)
= H
= H
Note: The same corner piece can be used to produce a 90° inside corner and a 90° outside corner. It can also be used as an end cap.
Inside/outside corner/end cap
Stainless steel
Aluminum
= H
= H
Finishes: Stainless steel (E) Brushed stainless steel (EB) Satin anodized aluminum (AE)
Polished chrome anod. alu. (ACG)
H = tile thickness Item No. Item No. Item No. Item No.
3/16 Q45E - Q45AE Q45ACG1/4 Q60E Q60EB Q60AE Q60ACG5/16 Q80E Q80EB Q80AE Q80ACG11/32 Q90E Q90EB - -3/8 Q100E Q100EB Q100AE Q100ACG7/16 Q110E Q110EB - -1/2 Q125E Q125EB Q125AE Q125ACG17/32 Q140E Q140EB - -9/16 Q150E Q150EB Q150AE -3/4 - - Q200AE -
Inside/outside corner 90°/end cap3/16 EV/Q45E - EV/Q45AE EV/Q45ACG1/4 EV/Q60E EV/Q60EB EV/Q60AE EV/Q60ACG5/16 EV/Q80E EV/Q80EB EV/Q80AE EV/Q80ACG11/32 EV/Q90E EV/Q90EB - -3/8 EV/Q100E EV/Q100EB EV/Q100AE EV/Q100ACG7/16 EV/Q110E EV/Q110EB - -1/2 EV/Q125E EV/Q125EB EV/Q125AE EV/Q125ACG17/32 EV/Q140E EV/Q140EB - -9/16 EV/Q150E EV/Q150EB EV/Q150AE -3/4 - - EV/Q200AE -
Connector5/16 V/RO80E V/RO80E V/RO80 V/RO803/8 V/RO100E V/RO100E V/RO100 V/RO1001/2 V/RO125E V/RO125E V/RO125 V/RO125
Connector
22 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Schluter®-QUADECSchluter®-QUADEC is a square profile designed to protect and decorate outside wall corners, tile bases, and other tiled edges, e.g., tiled skirting. QUADEC can also be used as an accent within tile fields on both floors and walls. This profile allows for modern decorative design and interesting contrasts. The integrated joint spacer creates a channel for grouting the tile.Note: Schluter®-QUADEC in stainless steel does not have an inte-grated joint spacer.(Technical data sheet available at schluter.com)
= H
= H
Stainless steel
Aluminum
= H
= H
Finishes: Satin nickel anod. alu. (AT) Brushed antique bronze anod. alu. (ABGB)
H = tile thickness Item No. Item No.
3/16 Q45AT -1/4 Q60AT Q60ABGB5/16 Q80AT Q80ABGB3/8 Q100AT Q100ABGB1/2 Q125AT Q125ABGB
Inside/outside corner 90°/end cap3/16 EV/Q45AT -1/4 EV/Q60AT EV/Q60ABGB5/16 EV/Q80AT EV/Q80ABGB3/8 EV/Q100AT EV/Q100ABGB1/2 EV/Q125AT EV/Q125ABGB
Connector5/16 V/RO80 V/RO803/8 V/RO100 V/RO1001/2 V/RO125 V/RO125
Finishes: Tuscan beige color-coated alu. (TSB)
Tuscan bronze color-coated alu. (TSOB)
Tuscan pewter color-coated alu. (TSG)
H = tile thickness Item No. Item No. Item No.
5/16 Q80TSB Q80TSOB Q80TSG3/8 Q100TSB Q100TSOB Q100TSG1/2 Q125TSB Q125TSOB Q125TSG
Inside/outside corner 90°/end cap5/16 EV/Q80TSB EV/Q80TSOB EV/Q80TSG3/8 EV/Q100TSB EV/Q100TSOB EV/Q100TSG1/2 EV/Q125TSB EV/Q125TSOB EV/Q125TSG
Connector5/16 V/RO80 V/RO80 V/RO803/8 V/RO100 V/RO100 V/RO1001/2 V/RO125 V/RO125 V/RO125
Note: The same corner piece can be used to produce a 90° inside corner and a 90° outside corner. It can also be used as an end cap.
Inside/outside corner/end cap
Connector
23For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Schluter®-QUADEC-KSchluter®-QUADEC-K is a variant of the QUADEC profile without an anchoring leg. It features an open cavity that is filled with thin-set mortar to secure the profile in the assembly. Alternatively, the profile may be installed with an adhesive such as Schluter®-KERDI-FIX. QUADEC-K is installed in wall applications (e.g., wainscotings and bases) with coverings up to 1/2" thick. The profile is particularly suited for finishing edges in retrofit applications, such as thin porcelain panel installation over existing wall tiles. (Technical data sheet available at schluter.com)
1/2"
1/2"
Finishes: Satin anodized aluminum (AE)
Polished chrome anod. alu. (ACG)
Satin nickel anod. alu. (AT)
Brushed antique bronze anod. alu. (ABGB)
H = tile thickness Item No. Item No. Item No. Item No.
1/2 Q125AEK Q125ACGK Q125ATK Q125ABGBKInside/outside corner 90°/end cap
1/2 EV/Q125AE EV/Q125ACG EV/Q125AT EV/Q125ABGBConnector
1/2 V/RO125
Finishes: Tuscan beige color-coated alu. (TSB)
Tuscan bronze color-coated alu. (TSOB)
Tuscan pewter color-coated alu. (TSG)
H = tile thickness Item No. Item No. Item No.
1/2 Q125TSBK Q125TSOBK Q125TSGKInside/outside corner 90°/end cap
1/2 EV/Q125TSB EV/Q125TSOB EV/Q125TSGConnector1/2 V/RO125
New product
Inside/outside corner/end cap
Connector
Note: The same corner piece can be used to produce a 90° inside corner and a 90° outside corner. It can also be used as an end cap.
24 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Finishes: Chrome-plated solid brass (MC) Aluminum with polished chrome finish
H = tile thickness Profile Outside corner, 90º Inside corner, 90º
1/4 RO60MC EV/RO60ACG IV/RO60ACG5/16 RO80MC EV/RO80ACG IV/RO80ACG3/8 RO100MC EV/RO100ACG IV/RO100ACG1/2 RO125MC EV/RO125ACG IV/RO125ACG
= H
Brass
Schluter®-RONDEC (Chrome-plated solid brass)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.
(Technical data sheet available at schluter.com)
Note: Inside and outside wall corners for the Schluter®-RONDEC (MC) are made of aluminum with a polished chrome finish.
Outside corner
Inside corner
Schluter®-QUADEC-FSSchluter®-QUADEC-FS is a double-rail profile that features a recessed section with dovetailed grooves to which field or accent tile is bonded. The profile can be used to produce accents in tile fields on walls, chair rails, and various other decorative applications. The profile is designed to integrate with Schluter®-QUADEC.Note: The same corner piece can be used to produce a 90° inside corner and a 90° outside corner. It can also be used as an end cap.(Technical data sheet available at schluter.com)
= H
2"
2-7/
8"
Finishes: Satin anodized aluminum (AE)
Satin nickel anod. alu. (AT)
Brushed antique bronze anod. alu. (ABGB)
H = tile thickness Item No. Item No. Item No.
5/16 QF8/50AE QF8/50AT QF8/50ABGBInside/outside corner 90°/end cap
5/16 EV/QF8/50AE EV/QF8/50AT EV/QF8/50ABGB
Inside/outside corner / End cap (EV/)
25For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
= H
Stainless steel
Schluter®-RONDEC (Stainless steel)Note: The Schluter®-RONDEC in stainless steel does not have an integrated joint spacer.
(Technical data sheet available at schluter.com)
Note: Outside corners are available in solid stainless steel, or in aluminum with stainless steel appearance. Inside corners are only available in aluminum with stainless steel appearance.
Outside corner
Inside corner
RONDEC sink corners are used with the RONDEC profile to produce tiled-under sinks. The corners have a large radius (3/8" or 1-1/2") that allows them to match the contour of most standard sinks. The 3/8" corner piece features a double-leg design for ease of installation, while the 1-1/2" corner includes two stainless steel connectors to maintain the alignment of the corner piece and profiles during installation.
Sink corner with 3/8" radius
Sink corner with 1-1/2" radius
RONDEC connectors simplify the alignment of adjacent profile sections.
Connector
Finishes: Stainless steel (E) Brushed stainless steel (EB)
H = tile thickness Item No. Item No.
3/16 RO45E -1/4 RO60E RO60EB9/32 RO70E RO70EB5/16 RO80E RO80EB11/32 RO90E RO90EB3/8 RO100E RO100EB7/16 RO110E RO110EB1/2 RO125E RO125EB9/16 RO150E RO150EB
Outside corner 90°, stainless steel3/16 EV/RO45E -1/4 EV/RO60E EV/RO60EB 9/32 EV/RO70E EV/RO70EB5/16 EV/RO80E EV/RO80EB11/32 EV/RO90E EV/RO90EB3/8 EV/RO100E EV/RO100EB7/16 EV/RO110E EV/RO110EB1/2 EV/RO125E EV/RO125EB9/16 EV/RO150E EV/RO150EB
Outside corner 90°, aluminum with stainless steel appearance1/4 ED/RO60E -5/16 ED/RO80E -3/8 ED/RO100E -1/2 ED/RO125E -
Inside corner 90°, aluminum with stainless steel appearance1/4 ID/RO60E -5/16 ID/RO80E -3/8 ID/RO100E -1/2 ID/RO125E -
Sink corner with 3/8" radius, stainless steel5/16 I2S/RO80E/V2A I2S/RO80EB/V2A3/8 I2S/RO100E/V2A I2S/RO100EB/V2A1/2 I2S/RO125E/V2A I2S/RO125EB/V2A
Sink corner with 1-1/2" radius, stainless steel5/16 ISK/RO80E/38 -3/8 ISK/RO100E/38 -1/2 ISK/RO125E/38 -
Connector, stainless steel5/16 V/RO80E V/RO80E3/8 V/RO100E V/RO100E1/2 V/RO125E V/RO125E
End cap5/16 - EK/RO80EB3/8 - EK/RO100EB1/2 - EK/RO125EB
End cap
RONDEC end caps feature a bendable leg that is inserted into the RONDEC profile, and a brushed stainless steel plate that covers the open area of the profile in applications where the end of the profile is to be left exposed.
26 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Finishes: Satin anodized aluminum (AE)
Polished chrome anod. alu. (ACG)
Brushed chrome anod. alu. (ACGB)
Satin nickel anod. alu. (AT)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 RO60AE RO60ACG RO60ACGB RO60AT5/16 RO80AE RO80ACG RO80ACGB RO80AT3/8 RO100AE RO100ACG RO100ACGB RO100AT1/2 RO125AE RO125ACG RO125ACGB RO125AT
= H
Aluminum
Schluter®-RONDEC (Anodized aluminum)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.
(Technical data sheet available at schluter.com)
Schluter®-RONDEC sink corners are used with the RONDEC profile to produce tiled-under sinks. The corners, which feature a double-leg design for ease of installation, have a large radius (3/8”) that allows them to match the contour of most standard sinks.
Outside corner Inside corner Sink corner Double-leg inside or outside corner Connector
Schluter®-RONDEC double-leg corners simplify the framing of smaller elements with Schluter®-RONDEC, such as niches, windows, etc. The legs are detachable for use in applications where a single-leg corner is needed.
Finishes: Satin anodized aluminum (AE)
Polished chrome anod. alu. (ACG)
Brushed chrome anod. alu. (ACGB)
Satin nickel anod. alu. (AT)
H = tile thickness Item No. Item No. Item No. Item No.
Outside corner 90°1/4 EV/RO60AE EV/RO60ACG EV/RO60ACGB EV/RO60AT5/16 EV/RO80AE EV/RO80ACG EV/RO80ACGB EV/RO80AT3/8 EV/RO100AE EV/RO100ACG EV/RO100ACGB EV/RO100AT1/2 EV/RO125AE EV/RO125ACG EV/RO125ACGB EV/RO125ATInside corner 90°1/4 IV/RO60AE IV/RO60ACG IV/RO60ACGB IV/RO60AT5/16 IV/RO80AE IV/RO80ACG IV/RO80ACGB IV/RO80AT3/8 IV/RO100AE IV/RO100ACG IV/RO100ACGB IV/RO100AT1/2 IV/RO125AE IV/RO125ACG IV/RO125ACGB IV/RO125ATDouble-leg outside corner, 90º5/16 E2L/RO 80 AE E2L/RO80ACG E2L/RO80ACGB E2L/RO80AT3/8 E2L/RO 100 AE E2L/RO100ACG E2L/RO100ACGB E2L/RO100AT1/2 E2L/RO 125 AE E2L/RO125ACG E2L/RO125ACGB E2L/RO125ATDouble-leg inside corner, 90º5/16 I2L/RO 80 AE I2L/RO80ACG I2L/RO80ACGB I2L/RO80AT3/8 I2L/RO 100 AE I2L/RO100ACG I2L/RO100ACGB I2L/RO100AT1/2 I2L/RO 125 AE I2L/RO125ACG I2L/RO125ACGB I2L/RO125ATSink corner 3/8" (10 mm) radius5/16 I2S/RO 80 AE - I2S/RO80ACGB I2S/RO80AT3/8 I2S/RO 100 AE - I2S/RO100ACGB I2S/RO100AT1/2 I2S/RO 125 AE - I2S/RO125ACGB I2S/RO125ATConnector5/16 V/RO 80 V/RO80 V/RO80 V/RO803/8 V/RO 100 V/RO100 V/RO100 V/RO1001/2 V/RO 125 V/RO125 V/RO125 V/RO125
27For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
= H
Aluminum
Schluter®-RONDEC (Anodized aluminum)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.
(Technical data sheet available at schluter.com)
Finishes: Polished nickel anod. alu. (ATG)
Brushed nickel anod. alu. (ATGB)
Satin copper/bronze anod. alu. (AK)
Polished copper/bronze anod. alu. (AKG)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 RO60ATG RO60ATGB RO60AK RO60AKG5/16 RO80ATG RO80ATGB RO80AK RO80AKG3/8 RO100ATG RO100ATGB RO100AK RO100AKG1/2 RO125ATG RO125ATGB RO125AK RO125AKG
Schluter®-RONDEC sink corners are used with the RONDEC profile to produce tiled-under sinks. The corners, which feature a double-leg design for ease of installation, have a large radius (3/8”) that allows them to match the contour of most standard sinks.
Outside corner Inside corner Sink corner Double-leg inside or outside corner Connector
Schluter®-RONDEC double-leg corners simplify the framing of smaller elements with Schluter®-RONDEC, such as niches, windows, etc. The legs are detachable for use in applications where a single-leg corner is needed.
Finishes: Polished nickel anod. alu. (ATG)
Brushed nickel anod. alu. (ATGB)
Satin copper/bronze anod. alu. (AK)
Polished copper/bronze anod. alu. (AKG)
H = tile thickness Item No. Item No. Item No. Item No.
Outside corner 90°1/4 EV/RO60ATG EV/RO60ATGB EV/RO60AK EV/RO60AKG5/16 EV/RO80ATG EV/RO80ATGB EV/RO80AK EV/RO80AKG3/8 EV/RO100ATG EV/RO100ATGB EV/RO100AK EV/RO100AKG1/2 EV/RO125ATG EV/RO125ATGB EV/RO125AK EV/RO125AKGInside corner 90°1/4 IV/RO60ATG IV/RO60ATGB IV/RO60AK IV/RO60AKG5/16 IV/RO80ATG IV/RO80ATGB IV/RO80AK IV/RO80AKG3/8 IV/RO100ATG IV/RO100ATGB IV/RO100AK IV/RO100AKG1/2 IV/RO125ATG IV/RO125ATGB IV/RO125AK IV/RO125AKGDouble-leg outside corner, 90º5/16 E2L/RO80ATG E2L/RO80ATGB E2L/RO80AK E2L/RO80AKG3/8 E2L/RO 100 ATG E2L/RO100ATGB E2L/RO100AK E2L/RO100AKG1/2 E2L/RO 125 ATG E2L/RO125ATGB E2L/RO125AK E2L/RO125AKGDouble-leg inside corner, 90º5/16 I2L/RO80ATG I2L/RO80ATGB I2L/RO80AK I2L/RO80AKG3/8 I2L/RO100ATG I2L/RO100ATGB I2L/RO100AK I2L/RO100AKG1/2 I2L/RO125ATG I2L/RO125ATGB I2L/RO125AK I2L/RO125AKGSink corner 3/8" (10 mm) radius5/16 - I2S/RO80ATGB I2S/RO80AK -3/8 - I2S/RO100ATGB I2S/RO100AK -1/2 - I2S/RO125ATGB I2S/RO125AK -Connector5/16 V/RO80 V/RO80 V/RO80 V/RO803/8 V/RO100 V/RO100 V/RO100 V/RO1001/2 V/RO125 V/RO125 V/RO125 V/RO125
28 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
= H
Aluminum
Schluter®-RONDEC (Anodized aluminum)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.
(Technical data sheet available at schluter.com)
Finishes: Brushed copper/bronze anod. alu. (AKGB)
Brushed antique bronze anod. alu. (ABGB)
Satin brass anod. alu. (AM)
Polished brass anod. alu. (AMG)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 RO60AKGB RO60ABGB RO60AM RO60AMG5/16 RO80AKGB RO80ABGB RO80AM RO80AMG3/8 RO100AKGB RO100ABGB RO100AM RO100AMG1/2 RO125AKGB RO125ABGB RO125AM RO125AMG
Schluter®-RONDEC sink corners are used with the RONDEC profile to produce tiled-under sinks. The corners, which feature a double-leg design for ease of installation, have a large radius (3/8”) that allows them to match the contour of most standard sinks.
Outside corner Inside corner Sink corner Double-leg inside or outside corner Connector
Schluter®-RONDEC double-leg corners simplify the framing of smaller elements with Schluter®-RONDEC, such as niches, windows, etc. The legs are detachable for use in applications where a single-leg corner is needed.
Finishes: Brushed copper/bronze anod. alu. (AKGB)
Brushed antique bronze anod. alu. (ABGB)
Satin brass anod. alu. (AM)
Polished brass anod. alu. (AMG)
H = tile thickness Item No. Item No. Item No. Item No.
Outside corner 90°1/4 EV/RO60AKGB EV/RO60ABGB EV/RO60AM EV/RO60AMG5/16 EV/RO80AKGB EV/RO80ABGB EV/RO80AM EV/RO80AMG3/8 EV/RO100AKGB EV/RO100ABGB EV/RO100AM EV/RO100AMG1/2 EV/RO125AKGB EV/R125ABGB EV/RO125AM EV/RO125AMGInside corner 90°1/4 IV/RO60AKGB IV/RO60ABGB IV/RO60AM IV/RO60AMG5/16 IV/RO80AKGB IV/RO80ABGB IV/RO80AM IV/RO80AMG3/8 IV/RO100AKGB IV/RO100ABGB IV/RO100AM IV/RO100AMG1/2 IV/RO125AKGB IV/RO125ABGB IV/RO125AM IV/RO125AMGDouble-leg outside corner, 90º5/16 E2L/RO80AKGB E2L/RO80ABGB E2L/RO80AM E2L/RO80AMG3/8 E2L/RO100AKGB E2L/RO100ABGB E2L/RO100AM E2L/RO100AMG1/2 E2L/RO125AKGB E2L/RO125ABGB E2L/RO125AM E2L/RO125AMGDouble-leg inside corner, 90º5/16 I2L/RO80AKGB I2L/RO80ABGB I2L/RO80AM I2L/RO80AMG3/8 I2L/RO100AKGB I2L/RO100ABGB I2L/RO100AM I2L/RO100AMG1/2 I2L/RO125AKGB I2L/RO125ABGB I2L/RO125AM I2L/RO125AMGSink corner 3/8" (10 mm) radius5/16 I2S/RO80AKGB I2S/RO80ABGB I2S/RO80AM -3/8 I2S/RO100AKGB I2S/RO100ABGB I2S/RO100AM -1/2 I2S/RO125AKGB I2S/RO125ABGB I2S/RO125AM -Connector5/16 V/RO80 V/RO80 V/RO80 V/RO803/8 V/RO100 V/RO100 V/RO100 V/RO1001/2 V/RO125 V/RO125 V/RO125 V/RO125
29For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
= H
Aluminum
Schluter®-RONDEC (Anodized aluminum)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.
(Technical data sheet available at schluter.com)
Finishes: Brushed brass anod. alu. (AMGB)
Graphite anod. alu. (AGR)
Bright black anod. alu. (AGSG)
Brushed black anod. alu. (AGSB)
H = tile thickness Item No. Item No. Item No. Item No.
1/4 RO60AMGB RO60AGR RO60AGSG RO60AGSB5/16 RO80AMGB RO80AGR RO80AGSG RO80AGSB3/8 RO100AMGB RO100AGR RO100AGSG RO100AGSB1/2 RO125AMGB RO125AGR RO125AGSG RO125AGSB
Schluter®-RONDEC sink corners are used with the RONDEC profile to produce tiled-under sinks. The corners, which feature a double-leg design for ease of installation, have a large radius (3/8”) that allows them to match the contour of most standard sinks.
Outside corner Inside corner Sink corner Double-leg inside or outside corner Connector
Schluter®-RONDEC double-leg corners simplify the framing of smaller elements with Schluter®-RONDEC, such as niches, windows, etc. The legs are detachable for use in applications where a single-leg corner is needed.
Finishes: Brushed brass anod. alu. (AMGB)
Graphite anod. alu. (AGR)
Bright black anod. alu. (AGSG)
Brushed black anod. alu. (AGSB)
H = tile thickness Item No. Item No. Item No. Item No.
Outside corner 90°1/4 EV/RO60AMGB EV/RO60AGR EV/RO60AGSG EV/RO60AGSB5/16 EV/RO80AMGB EV/RO80AGR EV/RO80AGSG EV/RO80AGSB3/8 EV/RO100AMGB EV/RO100AGR EV/RO100AGSG EV/RO100AGSB1/2 EV/RO125AMGB EV/RO125AGR EV/RO125AGSG EV/RO125AGSBInside corner 90°1/4 IV/RO60AMGB IV/RO60AGR IV/RO60AGSG IV/RO60AGSB5/16 IV/RO80AMGB IV/RO80AGR IV/RO80AGSG IV/RO80AGSB3/8 IV/RO100AMGB IV/RO100AGR IV/RO100AGSG IV/RO100AGSB1/2 IV/RO125AMGB IV/RO125AGR IV/RO125AGSG IV/RO125AGSBDouble-leg outside corner, 90º5/16 E2L/RO80AMGB E2L/RO80AGR E2L/RO80AGSG E2L/RO80AGSB3/8 E2L/RO100AMGB E2L/RO100AGR E2L/RO100AGSG E2L/RO100AGSB1/2 E2L/RO125AMGB E2L/RO125AGR E2L/RO125AGSG E2L/RO125AGSBDouble-leg inside corner, 90º5/16 I2L/RO 80 AMGB I2L/RO 80 AGR I2L/RO 80 AGSG I2L/RO 80 AGSB3/8 I2L/RO 100 AMGB I2L/RO 100 AGR I2L/RO 100 AGSG I2L/RO 100 AGSB1/2 I2L/RO 125 AMGB I2L/RO 125 AGR I2L/RO 125 AGSG I2L/RO 125 AGSBSink corner 3/8" (10 mm) radius5/16 I2S/RO80AMGB - - -3/8 I2S/RO100AMGB - - -1/2 I2S/RO125AMGB - - -Connector5/16 V/RO80 V/RO80 V/RO80 V/RO803/8 V/RO100 V/RO100 V/RO100 V/RO1001/2 V/RO125 V/RO125 V/RO125 V/RO125
30 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
= H
Aluminum
Schluter®-RONDEC (Color-coated aluminum)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.
(Technical data sheet available at schluter.com)
Finishes: Tuscan beige color-coated aluminum (TSB)
Tuscan bronze color-coated aluminum (TSOB)
Tuscan pewter color-coated aluminum (TSG)
H = tile thickness Item No. Item No. Item No.
5/16 RO80TSB RO80TSOB RO80TSG3/8 RO100TSB RO100TSOB RO100TSG1/2 RO125TSB RO125TSOB RO125TSG
Outside corner Inside corner Connector
Finishes: Tuscan beige color-coated aluminum (TSB)
Tuscan bronze color-coated aluminum (TSOB)
Tuscan pewter color-coated aluminum (TSG)
H = tile thickness Item No. Item No. Item No.
Outside corner 90°5/16 EV/RO80TSB EV/RO80TSOB EV/RO80TSG3/8 EV/RO100TSB EV/RO100TSOB EV/RO100TSG1/2 EV/RO125TSB EV/RO125TSOB EV/RO125TSGInside corner 90°5/16 IV/RO80TSB IV/RO80TSOB IV/RO80TSG3/8 IV/RO100TSB IV/RO100TSOB IV/RO100TSG1/2 IV/RO125TSB IV/RO125TSOB IV/RO125TSGConnector5/16 V/RO80 V/RO80 V/RO803/8 V/RO100 V/RO100 V/RO1001/2 V/RO125 V/RO125 V/RO125
31For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Color Codes
HBLightbeige
BWBright white
HGLightgrey
Wwhite
PGClassicgrey
SPSandpebble
GGrey
BHBahama
Note: For aluminum profiles in black finish please see page 29.
Schluter®-RONDEC (Color-coated aluminum)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.
(Technical data sheet available at schluter.com)
Outside corner
Inside corner
H = tile thickness
Bright white White Sand pebble Bahama Light beige
Item No.1/4 RO60BW RO60W RO60SP RO60BH RO60HB5/16 RO80BW RO80W RO80SP RO80BH RO80HB3/8 RO100BW RO100W RO100SP RO100BH RO100HB1/2 RO125BW RO125W RO125SP RO125BH RO125HB
Outside corner 90°1/4 ED/RO60BW ED/RO60W ED/RO60SP ED/RO60BH ED/RO60HB5/16 ED/RO80BW ED/RO80W ED/RO80SP ED/RO80BH ED/RO80HB3/8 ED/RO100BW ED/RO100W ED/RO100SP ED/RO100BH ED/RO100HB1/2 ED/RO125BW ED/RO125W ED/RO125SP ED/RO125BH ED/RO125HB
Inside corner 90°1/4 ID/RO60BW ID/RO60W ID/RO60SP ID/RO60BH ID/RO60HB5/16 ID/RO80BW ID/RO80W ID/RO80SP ID/RO80BH ID/RO80HB3/8 ID/RO100BW ID/RO100W ID/RO100SP ID/RO100BH ID/RO100HB1/2 ID/RO125BW ID/RO125W ID/RO125SP ID/RO125BH ID/RO125HB
H = tile thickness
Light grey Classic grey Grey
Item No.1/4 RO60HG RO60PG RO60G5/16 RO80HG RO80PG RO80G3/8 RO100HG RO100PG RO100G1/2 RO125HG RO125PG RO125GOutside corner 90°1/4 ED/RO60HG ED/RO60PG ED/RO60G5/16 ED/RO80HG ED/RO80PG ED/RO80G3/8 ED/RO100HG ED/RO100PG ED/RO100G1/2 ED/RO125HG ED/RO125PG ED/RO125GInside corner 90°1/4 ID/RO60HG ID/RO60PG ID/RO60G5/16 ID/RO80HG ID/RO80PG ID/RO80G3/8 ID/RO100HG ID/RO100PG ID/RO100G1/2 ID/RO125HG ID/RO125PG ID/RO125G
= H
Aluminum
32 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Color Codes
HBLightbeige
BWBright white
HGLightgrey
Wwhite
PGClassicgrey
SPSandpebble
GGrey
BHBahama
GSBlack
= H
PVC
Schluter®-RONDEC (PVC)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.
(Technical data sheet available at schluter.com)
Outside corner
Inside corner
H = tile thickness
Bright white White Sand pebble Bahama Light beige Light grey
Item No.1/4 PRO60BW PRO60W PRO60SP PRO60BH PRO60HB PRO60HG5/16 PRO80BW PRO80W PRO80SP PRO80BH PRO80HB PRO80HG3/8 PRO100BW PRO100W PRO100SP PRO100BH PRO100HB PRO100HGOutside corner 90°1/4 E/PRO60BW E/PRO60W E/PRO60SP E/PRO60BH E/PRO60HB PRO60HG5/16 E/PRO80BW E/PRO80W E/PRO80SP E/PRO80BH E/PRO80HB PRO80HG3/8 E/PRO100BW E/PRO100W E/PRO100SP E/PRO100BH E/PRO100HB PRO100HGInside corner 90°1/4 I/PRO60BW I/PRO60W I/PRO60SP I/PRO60BH I/PRO60HB I/PRO60HG5/16 I/PRO80BW I/PRO80W I/PRO80SP I/PRO80BH I/PRO80HB I/PRO80HG3/8 I/PRO100BW I/PRO100W I/PRO100SP I/PRO100BH I/PRO100HB I/PRO100HG
H = tile thickness
Classic grey Grey Black
Item No.1/4 PRO60PG PRO60G PRO60GS5/16 PRO80PG PRO80G PRO80GS3/8 PRO100PG PRO100G PRO100GSOutside corner 90°1/4 E/PRO60PG E/PRO60G E/PRO60GS5/16 E/PRO80PG E/PRO80G E/PRO80GS3/8 E/PRO100PG E/PRO100G E/PRO100GSInside corner 90°1/4 I/PRO60PG I/PRO60G I/PRO60GS5/16 I/PRO80PG I/PRO80G I/PRO80GS3/8 I/PRO100PG I/PRO100G I/PRO100GS
33For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
How to order corners:
* To complete the item number for corners, add the corresponding profile item number (e.g., E90RC80AK39).
A = 1-1/2"
= H
= H1-1/4"
Schluter®-RONDEC-CTSchluter®-RONDEC-CT is a double-rail edging profile for countertops that have been fitted with a ceramic or dimensional stone tile covering. The face of the profile features a recessed section with dovetailed grooves to which field or accent tile is bonded.
(Technical data sheet available at schluter.com)
Outside corner Inside corner
Finishes: Satin anodized aluminum (AE)
Brushed chrome anod. alu. (ACGB)
Satin nickel anod. alu. (AT)
Brushed nickel anod. alu. (ATGB)
H = tile thickness Item No. Item No. Item No. Item No.
A = 1-1/2"5/16 RC80AE39 RC80ACGB39 RC80AT39 RC80ATGB39 3/8 RC100AE39 RC100ACGB39 RC100AT39 RC100ATGB391/2 RC125AE39 RC125ACGB39 RC125AT39 RC125ATGB39
Finishes: Satin copper/bronze anod. alu. (AK)
Brushed copper/bronze anod. alu. (AKGB) Satin brass anod. alu. (AM) Brushed brass
anod. alu. (AMGB)
H = tile thickness Item No. Item No. Item No. Item No.
A = 1-1/2"5/16 RC80AK39 RC80AKGB39 RC80AM39 RC80AMGB39 3/8 RC100AK39 RC100AKGB39 RC100AM39 RC100AMGB391/2 RC125AK39 RC125AKGB39 RC125AM39 RC125AMGB39
Finishes: Tuscan beige color-coated alu. (TSB)
Tuscan bronze color-coated alu. (TSOB)
Tuscan pewter color-coated alu. (TSG)
H = tile thickness Item No. Item No. Item No.
A = 1-1/2"5/16 RC80TSB39 RC80TSOB39 RC80TSG39 3/8 RC100TSB39 RC100TSOB39 RC100TSG391/2 RC125TSB39 RC125TSOB39 RC125TSG39
Accessories Item No.
Corners for AE, AM, AT, and AK (Satin finishes)Outside corners, 90° E90 profile item number*Outside corners, 135° E135 profile item number*Inside corners, 90° I90 profile item number*Inside corners, 135° I135 profile item number*Corners for ACGB, AMGB, ATGB, and AKGB (Brushed finishes)Outside corners, 90° E90 profile item number*Outside corners, 135° E135 profile item number*Inside corners, 90° I90 profile item number*Inside corners, 135° I135 profile item number*Corners for TSB, TSOB, and TSG (Tuscan finishes)Outside corners, 90° E90 profile item number*Outside corners, 135° E135 profile item number*Inside corners, 90° I90 profile item number*Inside corners, 135° I135 profile item number*
34 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Schluter®-RONDEC-STEPSchluter®-RONDEC-STEP is an edging profile for countertops or stairs that have been fitted with a ceramic or stone tile covering.
(Technical data sheet available at schluter.com)
= H
A = 1-1/2" or 2-1/4"
How to order corners:
* To complete the item number for corners, add the corresponding profile item number (e.g., E90RS80ACGB39).
Outside corner (90º or 135º)
Inside corner (90º or 135º)
Finishes: Satin anodized aluminum (AE)
Brushed chrome anod. alu. (ACGB)
Satin nickel anod. alu. (AT)
Satin copper/bronze anod. alu. (AK)
H = tile thickness Item No. Item No. Item No. Item No.
A = 1-1/2"5/16 RS80AE39 RS80ACGB39 RS80AT39 RS80AK393/8 RS100AE39 RS100 ACGB39 RS100AT39 RS100AK391/2 RS125AE39 RS125ACGB39 RS125AT39 RS125AK39A = 2-1/4"5/16 RS80AE57 RS80ACGB57 RS80AT57 RS80AK573/8 RS100AE57 RS100ACGB57 RS100AT57 RS100AK571/2 RS125AE57 RS125ACGB57 RS125AT57 RS125AK57
Finishes: Brushed copper/bronze anod. alu. (AKGB)
Brushed brass anod. alu. (AMGB) Satin brass anod. alu. (AM)
H = tile thickness Item No. Item No. Item No.
A = 1-1/2"5/16 RS80AKGB39 RS80AMGB39 -3/8 RS100AKGB39 RS100AMGB39 -1/2 RS125AKGB39 RS125AMGB39 -A = 2-1/4"5/16 RS80AKGB57 RS80AMGB57 RS80AM573/8 RS100AKGB57 RS100AMGB57 RS100AM571/2 RS125AKGB57 RS125AMGB57 RS125AM57
Finishes: Brushed nickel anod. alu. (ATGB)
Brushed antique bronze anod. alu. (ABGB)
H = tile thickness Item No. Item No.
A = 1-1/2"5/16 RS80ATGB39 RS80ABGB393/8 RS100ATGB39 RS100ABGB391/2 RS125ATGB39 RS125ABGB39
Accessories Item No.
Corners for AE, AM, AT, and AK (Satin finishes)
Outside corners, 90° E90 profile item number*Outside corners, 135° E135 profile item number*Inside corners, 90° I90 profile item number*Inside corners, 135° I135 profile item number*Corners for ACGB, AMGB, ATGB, AKGB, and ABGB (Brushed finishes)
Outside corners, 90° E90 profile item number*Outside corners, 135° E135 profile item number*Inside corners, 90° I90 profile item number*Inside corners, 135° I135 profile item number*
35For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
17/32"
5/16" 7/32"
Note: All corresponding RONDEC finishes match those of Schluter®-DESIGNLINE.
Schluter®-RONDEC-DBSchluter®-RONDEC-DB is a decorative profile for wall and skirting edges.
(Technical data sheet available at schluter.com)
Schluter®-DESIGNLINESchluter®-DESIGNLINE is a border profile for creating decorative designs in wall coverings. These profiles can be combined with the appropriate Schluter®-RONDEC profiles for outside wall corners.
(Technical data sheet available at schluter.com)
Stainless steel, Solid brass
Aluminum
1/4"
1"
1/4"
1"
Finishes: Satin anodized aluminum (AE)
Satin copper/bronze anod. alu. (AK)
Satin brass anod. alu. (AM)
H = tile thickness Item No. Item No. Item No.
17/32 DB14AE DB14AK DB14AMOutside corner, 90°
17/32 EV/DB14AE
Item No. Finishes
DL625E Stainless steel (E)DL625EB Brushed stainless steel (EB)DL625MC Chrome-plated solid brass (MC)DL625AE Satin anodized aluminum (AE)DL625ACG Polished chrome anod. alu. (ACG)DL625ACGB Brushed chrome anod. alu. (ACGB)DL625AT Satin nickel anod. alu. (AT)DL625ATG Polished nickel anod. alu. (ATG)DL625ATGB Brushed nickel anod. alu. (ATGB)DL625AK Satin copper/bronze anod. alu. (AK) DL625AKG Polished copper/bronze anod. alu. (AKG)DL625AKGB Brushed copper/bronze anod. alu. (AKGB) DL625AM Satin brass anod. alu. (AM)DL625AMG Polished brass anod. alu. (AMG)DL625AMGB Brushed brass anod. alu. (AMGB)
Outside corner (90º)
36 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Schluter®-DECO-DE is a stainless steel finishing and edge-protection profile for 135° outside corners of tiled surfaces.
(Technical data sheet available at schluter.com)
Schluter®-DECO-DE
Finishes: Stainless steel 304(1.4301 = V2A) (E)
Brushed stainless steel 304 (1.4301 = V2A) (EB)
H = tile thickness Item No. Item No.
5/16 DE80ES DE80EBS 3/8 DE100ES DE100EBS7/16 DE110ES DE110EBS1/2 DE125ES DE125EBS
135°
= H
= H
New product
Schluter®-REMASchluter®-REMA is a system for creating concealed access panels in tiled walls. REMA can be applied irrespective of the tile size and thickness, and adapts perfectly to the joint pattern.
(Technical data sheet available at schluter.com)
Mounting plate
Magnet
Set = 4 Magnets + 4 Mounting plates
Item No.
REMA
37For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Schluter®-ECK-ESchluter®-ECK-E is a stainless steel edging profile for outside corners on tiled surfaces, offering excellent protection for edges subject to high degrees of wear. The perforated anchoring legs are embedded in the tile adhesive during tile installation.
(Technical data sheet available at schluter.com)
Finishes: Stainless steel 304(1.4301 = V2A) (E)
Brushed stainless steel 304 (1.4301 = V2A) (EB)
H = tile thickness Item No. Item No.
90º AngleL = 4' 11"1/4 E37V2A60/150 E37V2AEB60/150 5/16 E37V2A80/150 E37V2AEB80/1507/16 E37V2A110/150 E37V2AEB110/150L = 6' 7"
1/4 E37V2A60/200 E37V2AEB60/2005/16 E37V2A80/200 E37V2AEB80/200 7/16 E37V2A110/200 E37V2AEB110/200L = 8' 2-1/2"
1/4 E37V2A60/250 E37V2AEB60/2505/16 E37V2A80/250 E37V2AEB80/250 7/16 E37V2A110/250 E37V2AEB110/250 135º AngleL = 8' 2-1/2"
1/4 E37E60S E37EB60S5/16 E37E80S E37EB80S7/16 E37E110S E37EB110S
= H
1-15/32"
= H
r = 5/16"
1-15/32"
90º 135º
38 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Schluter®-ECK-KI
W = in.
Stainless steel 304(1.4301 = V2A) (E)
Brushed stainless steel 304 (1.4301 = V2A) (EB)
Item No. Item No.
L = 4' 11"
9/16 KI15E/150 KI15EB/150 L = 6' 7"
9/16 KI15E/200 KI15EB/200 L = 8' 2-1/2"
9/16 KI15E KI15EB
Schluter®-ECK-KISchluter®-ECK-KI is a stainless steel profile for inside wall corners that produces a clean, decorative finish. ECK-KI is subsequently bonded to the inside corners of existing tile or other wall coverings. As such, the profile can be installed as a repair so that existing, damaged corners do not have to be replaced.
(Technical data sheet available at schluter.com)
Schluter®-ECK-KSchluter®-ECK-K is a stainless steel corner profile for subsequent installation on the outside corners of tile or other wall coverings. The profile is applied using Schluter®-KERDI-FIX (see page 66), or a similar adhesive.
(Technical data sheet available at schluter.com)
W = in.
Stainless steel 304(1.4301 = V2A) (E)
Brushed stainless steel 304 (1.4301 = V2A) (EB)
Item No. Item No.
90º AngleL = 4' 11" 9/16 K15V2A/150 K15V2AEB/150 1-9/32 K32V2A/150 K32V2AEB/150 2 K50V2A/150 K50V2AEB/150L = 6' 7"
1-9/32 K32V2A/200 K32V2AEB/200 2 K50V2A/200 K50V2AEB/200L = 8' 2-1/2"
9/16 K15V2A/250 K15V2AEB/250 1-9/32 K32V2A/250 K32V2AEB/250 2 K50V2A/250 K50V2AEB/250 135º AngleL = 4' 11"1-9/32 K32ES/150L = 8' 2-1/2"
1-9/32 K32ES
r = 1/8"
= W = W
90º 135º
W = 9/16"
r = .03"
39For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S
Schluter®-ECK-KHK
Schluter®-ECK-KHK
Stainless steel 304 (1.4301 = V2A) (E)
H = in. Profile Outside corner, 90°
Inside corner, 90º (2-way)
Inside corner, 90º (3-way)
L = 4' 11"
E/KHK15E I/2KHK15E I/3KHK15E
9/16 KHK15E/150 L = 6' 7"
9/16 KHK15E/200 L = 8' 2-1/2"
9/16 KHK15E Connector V/KHK15E
Brushed stainless steel 304 (1.4301 = V2A) (EB)
H = in. Profile Outside corner, 90°
Inside corner, 90º (2-way)
Inside corner, 90º (3-way)
L = 4' 11"
E/KHK15EB I/2KHK15EB I/3KHK15EB
9/16 KHK15EB/150 L = 6' 7"
9/16 KHK15EB/200 L = 8' 2-1/2"
9/16 KHK15EB Connector V/KHK15EB
Schluter®-ECK-KHK is a stainless steel profile for inside wall corners that produces a radiused edge for a clean, decorative finish. ECK-KHK is subsequently bonded to the inside corners of existing tile or other wall coverings. As such, the profile can be installed as a repair so that existing, damaged corners do not have to be replaced.
(Technical data sheet available at schluter.com)
Inside corner, 2-way Inside corner, 3-way
W = 9/16" mm
r = 5/16"
40 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
S T A I R - N O S I N G P R O F I L E S
Schluter®-RONDEC-STEP
Schluter®-TREP-FL
Schluter®-TREP-E
41For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
S T A I R - N O S I N G P R O F I L E S
Schluter®-TREP-FLSchluter®-TREP-FL is a stainless steel stair nosing profile with a protruding rounded edge used to finish and protect tiled stair edges.
(Technical data sheet available at schluter.com)
= H
13/1
6"
87°
GGrey
SBBlackbrown
HBLightbeige
NBNutbrown
*Color Codes (-T)
To complete the item number, add the color code (e.g., THB8).
GGrey
SBBlackbrown
*Color Codes (-TL)
To complete the item number, add the color code (e.g., TSB8L).
Schluter®-TREP-T/-TLSchluter®-TREP-T/-TL are made of rigid and soft PVC for safe, slip-resistant stair edges.
(Technical data sheet available at schluter.com)
= H
3/4" TREP-T
End cap
Finishes: Stainless steel (E) Brushed stainless steel (EB)
H = tile thickness Item No. Item No.
L = 8' 2-1/2"
11/32 FL90E FL90EB7/16 FL110E FL110EB1/2 FL125E FL125EBL = 4' 11"
11/32 FL 90E/150 FL90EB/150 7/16 FL110E/150 FL110EB/1501/2 FL125E/150 FL125EB/150End cap
E/FLEB
Finishes: Rigid/soft PVC (T) Rigid/soft PVC with luminescent inlay (TL)
H = tile thickness Item No. Item No.
L = 8' 2-1/2"
5/16 Tcolor*8 Tcolor*8 L7/16 Tcolor*11 Tcolor*11 LEnd cap
EKT/+ color*
End cap (E/)
42 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
S T A I R - N O S I N G P R O F I L E S
Schluter®-RONDEC-STEPSchluter®-RONDEC-STEP is an edging profile for countertops or stairs that have been fitted with a ceramic or stone tile covering.
(Technical data sheet available at schluter.com)
= H
A = 1-1/2" or 2-1/4"
How to order corners:
* To complete the item number for corners, add the corresponding profile item number (e.g., E90RS80ACGB39).
Outside corner
Inside corner
Finishes: Satin anodized aluminum (AE)
Brushed chrome anod. alu. (ACGB)
Satin nickel anod. alu. (AT)
Satin copper/bronze anod. alu. (AK)
H = tile thickness Item No. Item No. Item No. Item No.
A = 1-1/2"5/16 RS80AE39 RS80ACGB39 RS80AT39 RS80AK393/8 RS100AE39 RS100 ACGB39 RS100AT39 RS100AK391/2 RS125AE39 RS125ACGB39 RS125AT39 RS125AK39A = 2-1/4" 5/16 RS80AE57 RS80ACGB57 RS80AT57 RS80AK57 3/8 RS100AE57 RS100ACGB57 RS100AT57 RS100AK57 1/2 RS125AE57 RS125ACGB57 RS125AT57 RS125AK57
Finishes: Brushed copper/bronze anod. alu. (AKGB)
Brushed brass anod. alu. (AMGB) Satin brass anod. alu. (AM)
H = tile thickness Item No. Item No. Item No.
A = 1-1/2"5/16 RS80AKGB39 RS80AMGB39 -3/8 RS100AKGB39 RS100AMGB39 -1/2 RS125AKGB39 RS125AMGB39 -A = 2-1/4"5/16 RS80AKGB57 RS80AMGB57 RS80AM573/8 RS100AKGB57 RS100AMGB57 RS100AM571/2 RS125AKGB57 RS125AMGB57 RS125AM57
Finishes: Brushed nickel anod. alu. (ATGB)
Brushed antique bronze anod. alu. (ABGB)
H = tile thickness Item No. Item No.
A = 1-1/2"5/16 RS80ATGB39 RS80ABGB393/8 RS100ATGB39 RS100ABGB391/2 RS125ATGB39 RS125ABGB39
Accessories Item No.
Corners for AE, AM, AT, and AK (Satin finishes)
Outside corners, 90° E90 profile item number*Outside corners, 135° E135 profile item number*Inside corners, 90° I90 profile item number*Inside corners, 135° I135 profile item number*Corners for ACGB, AMGB, ATGB, AKGB, and ABGB (Brushed finishes)
Outside corners, 90° E90 profile item number*Outside corners, 135° E135 profile item number*Inside corners, 90° I90 profile item number*Inside corners, 135° I135 profile item number*
43For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
S T A I R - N O S I N G P R O F I L E S
Schluter®-SCHIENE-STEPSchluter®-SCHIENE-STEP is an anodized aluminum finishing and edging profile for ceramic tile and natural stone installations on stairs. The top of the profile features an 87° sloped vertical wall section that transfers point loads to the substrate and surface covering while protecting the tile from damage, while the ribbed vertical leg covers the edge of the sub-assembly or top of the riser.
(Technical data sheet available at schluter.com)
A = 1-3/16" or 1-1/2"
= H
Finishes: Satin anodized aluminum (AE)
Satin nickel anodized aluminum (AT)
H = tile thickness Item No. Item No.
A = 1-3/16"5/16 SS80AE30 SS80AT303/8 SS100AE30 SS100AT301/2 SS125AE30 SS125AT309/16 SS150AE30 SS150AT30
A = 1-1/2"5/16 SS80AE39 SS80AT393/8 SS100AE39 SS100AT391/2 SS125AE39 SS125AT399/16 SS150AE39 SS150AT39
New product
Schluter®-TREP-E/-EKSchluter®-TREP-E/-EK are stainless steel profiles designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design.
TREP-E has a stainless steel anchoring leg which is embedded in the tile bond coat. TREP-EK is subsequently bonded to existing installations using Schluter®-KERDI-FIX (see page 66), or a similar adhesive. As such, TREP-EK can be installed as a repair so that existing, damaged stair treads do not have to be replaced.
ADA – Wear surface meets or exceeds the static coefficient of friction recommendation, for use in applications where the risk of slipping exists.
(Technical data sheet available at schluter.com)
End cap (E/)
= H
1-3/16"
3/8" 1/8"
1-19/64"
3/8"
3/16"
TREP-E TREP-EK
3/16"
ADA-Compliant
To adhere use Schluter®-KERDI-FIX
KERDI-FIX
Schluter®-TREP-EStainless steel (E) with ancholring leg
H = tile thickness Item No.
L = 8' 2-1/2"
3/32 TE203/16 TE505/16 TE807/16 TE1105/8 TE1601 TE250L = 4' 11"
3/32 TE20/150 3/16 TE50/1505/16 TE80/1507/16 TE110/1505/8 TE160/1501 TE250/150End cap
E/TE
Schluter®-TREP-EKStainless steel 304 (E) retro-fit
H = tile thickness Item No.
L = 8' 2-1/2"
TEKL = 4' 11"
TEK/150
44 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
S T A I R - N O S I N G P R O F I L E S
Schluter®-TREP-G/-GKSchluter®-TREP-G/-GK are designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design. The surface features a self-adhesive, non-slip tread with an embedded mineral grain coating, which is available in a variety of colors and can be replaced in case of damage or wear. TREP-GK is bonded to existing installations using Schluter®-KERDI-FIX (see page 66), or a similar adhesive.
(Technical data sheet available at schluter.com)
= H
1-3/16" or 2-5/32"
11/16"
1/16"
1-11/32" or 2-21/64"
11/16"
TREP-G TREP-GK
*Color Codes (-G/-GK)
CGYellow
GSBlack
NBNut brown
TTransparent
* To complete the item number, add thecolor code (e.g., GSEB90GS).
To adhere use Schluter®-KERDI-FIX
KERDI-FIX
Schluter®-TREP-G-SBrushed stainless steel support with non-slip tread (1-3/16")
H = tile thickness Item No.
L = 8' 2-1/2"
11/32 GSEB90color* 7/16 GSEB110color*33/64 GSEB130color*9/16 GSEB150color*L = 4' 11"
11/32 GSEB90color*/150 7/16 GSEB110color*/15033/64 GSEB130color*/1509/16 GSEB150color*/150Replacement treadL = 60' 1/32"
GSKB183color*End cap
E/GSEB
Schluter®-TREP-G-BBrushed stainless steel support with non-slip tread (2-5/32")
H = tile thickness Item No.
L = 8' 2-1/2"
11/32 GBEB90color* 7/16 GBEB110color*33/64 GBEB130color*9/16 GBEB150color*L = 4' 11"
11/32 GBEB90color*/150 7/16 GBEB110color*/15033/64 GBEB130color*/1509/16 GBEB150color*/150Replacement treadL = 60' 1/32"
GBKB183color*End cap
E/GBEB
Schluter®-TREP-GK-SBrushed stainless steel support with non-slip tread (1-11/32")
H = tile thickness Item No.
L = 8' 2-1/2"
GSEBKcolor* L = 4' 11"
GSEBKcolor*/150Replacement treadL = 60' 1/32"
GSKB183color*
Schluter®-TREP-GK-BBrushed stainless steel support with non-slip tread (2-21/64")
H = mm - in. Item No.
L = 8' 2-1/2"
GBEBKcolor* L = 4' 11"
GBEBKcolor*/150Replacement treadL = 60' 1/32"
GBKB183color*
End cap
45For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
S T A I R - N O S I N G P R O F I L E S
NBNutBrown
GSBlack
CGYellow
GGrey
*Color Codes
To complete the item number, add the color code (e.g., G10SE).
HBLightbeige
Schluter®-TREP-SE/-S/-BSchluter®-TREP-SE/-S/-B are slip-resistant stair nosings. The profiles have an aluminum support section (-S/-B) or a stainless steel support section (-SE) with a replaceable thermoplastic tread.
(Technical data sheet available at schluter.com)
TREP-SE/-S TREP-B
TREP-B
TREP-SE TREP-S
= H
1-1/32" 3/32"
= H
1-1/32" 3/32"
= H
2-1/16" 3/32"
TREP-B
End cap
TREP-SE/-S
Schluter®-TREP-SEStainless steel support with thermoplastic rubber insert (1-1/32")
H = tile thickness Item No.
L = 8' 2-1/2"
5/16 color*8SE3/8 color*10SE1/2 color*12SEL = 4' 11"
5/16 color*8SE/1503/8 color*10SE/1501/2 color*12SE/150Replacement thermoplastic rubber insertL = 8' 2-1/2"
PE26/color*End cap
E26/color*
Schluter®-TREP-SAluminum support with thermoplastic rubber insert (1-1/32")
H = tile thickness Item No.
L = 8' 2-1/2"
5/16 color*8S3/8 color*10S1/2 color*12SL = 4' 11"
5/16 color*8S/1503/8 color*10S/1501/2 color*12S/150Replacement thermoplastic rubber insertL = 8' 2-1/2"
PEA26/color*End cap
E26/color*
Schluter®-TREP-BAluminum support with thermoplastic rubber insert (2-1/16")
H = tile thickness Item No.
L = 8' 2-1/2"
5/16 color*8B3/8 color*10B1/2 color*12B9/16 color*15B1 color*25BL = 4' 11"
5/16 color*8B/1503/8 color*10B/1501/2 color*12B/1509/16 color*15B/1501 color*25B/150Replacement thermoplastic rubber insertL = 8' 2-1/2"
PEA 52/color*End cap
E52/color*
Schluter®-TREP-TAPSchluter®-TREP-TAP is an anodized aluminum cover profile that can be used in conjunction with the Schluter®-TREP-S or TREP-B stair-nosing profiles to conceal the top of the riser.
(Technical data sheet available at schluter.com)
= H
= A
2-13
/32"
Schluter®-TREP-TAPSatin anod. alu. (AE)
Item No.
L = 8' 2-1/2"
TAPR61AE L = 4' 11"
TAPR61AE/150
46 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
46
Schluter®-DILEX-BWBSchluter®-DILEX-EKE
Schluter®-DILEX-AHK
47For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
PGClassicgrey
GGrey
BWBrightwhite
SPSandpebble
*Color Codes
To complete the item number, add the color code (e.g., BWS80G).
GSBlack
HBLightbeige
Schluter®-DILEX-EZ 6 + 9Schluter®-DILEX 6 and 9 combine decorative design with stress-relieving function for tile and stone set in a thin bed of adhesive. The profile features two usable surfaces in different colors. The sidewalls are made of rigid PVC; the movement zones are made of soft PVC.
(Technical data sheet available at schluter.com)
= H
9/32"
Schluter®-DILEX-BWSSchluter®-DILEX-BWS is a movement joint profile with side sections made of rigid, recycled PVC. The movement zone, made of soft CPE, creates the 3/16”-wide visible surface.
(Technical data sheet available at schluter.com)
= H
3/16"
2-3/16"
*Color Codes
GGrey
CGYellow
M/G = Brass inlay / greyC/CG = Chrome inlay / yellow
Decorative movement joint (PVC)
H = tile thickness Item No. Item No.
1/4 EZM/G6 EZC/CG611/32 EZM/G9 EZC/CG9
Movement profile (PVC)
H = tile thickness Item No.
3/16 BWS45color*1/4 BWS60color*5/16 BWS80color*11/32 BWS90color*3/8 BWS100color*7/16 BWS110color*1/2 BWS125color*
48 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
Stainless steel (E)
H = tile thickness Item No.
5/16 EDP8011/32 EDP903/8 EDP1007/16 EDP1101/2 EDP12517/32 EDP1405/8 EDP16023/32 EDP18513/16 EDP2101 EDP2501-3/16 EDP300
PGClassicgrey
GGrey
BWBrightwhite
SPSandpebble
*Color Codes
To complete the item number, add the color code (e.g., BWB80G).
Note: BWB 60 is not available in Sand Pebble (SP).
GSBlack
HBLightbeige
Schluter®-DILEX-BWBSchluter®-DILEX-BWB is a movement joint profile with side sections made of rigid, recycled PVC. The top movement zone, made of soft CPE, creates the 3/8”-wide visible surface.
(Technical data sheet available at schluter.com)
= H
3/8"
2-3/16"
= H
15/32"Schluter®-DILEX-EDPSchluter®-DILEX-EDP is a stainless steel movement profile that allows horizontal movement via a tongue-and-groove connection.
(Technical data sheet available at schluter.com)
Movement profile (PVC)
H = tile thickness Item No.
1/4 BWB60color**5/16 BWB80color*3/8 BWB100color*1/2 BWB125color*9/16 BWB150G (Grey only)3/4 BWB200G (Grey only)
49For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
Schluter®-DILEX-KSNSchluter®-DILEX-KSN is a movement profile with edge protection. The profile consists of side anchoring legs made of brass, aluminum, or stainless steel, which are connected to a movement zone of soft synthetic rubber.
(Technical data sheet available at schluter.com)
Stainless steel
Aluminum, Solid brass
7/16"
2-5/16"
7/16"
2-11/16"
Schluter®-DILEX-BTSchluter®-DILEX-BT is a structural expansion joint profile made of aluminum or brass, with opposing support profiles that connect to a sliding telescopic center section. This allows for absorption of three-dimensional movement.
(Technical data sheet available at schluter.com)
GGrey
GSBlack
SPSandpebble
HBLightbeige
*Color Codes
To complete the item number, add the color code (e.g., EKSN125G).
PGClassicgrey
= H
1-19/32"
1-3/16"1-3/32"
3/16"
Finishes: Stainless steel 304(1.4301 = V2A) (E)
Aluminum (A)
H = tile thickness Item No. Item No.
5/16 EKSN80color* AKSN80color*3/8 EKSN100color* AKSN100color*7/16 EKSN110color* AKSN110color*1/2 EKSN125color* AKSN125color*17/32 EKSN140color* AKSN140color*5/8 EKSN160color* AKSN160color*23/32 EKSN185color* -13/16 EKSN210color* AKSN210color*1 EKSN250color* -1-3/16 EKSN300color* -Rubber insert replacement
KSE/color*
Finishes: Satin anodized aluminum (AE)
H = tile thickness Item No.
5/16 AEBT803/8 AEBT1001/2 AEBT1259/16 AEBT15011/16 AEBT1753/4 AEBT200
50 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
11/32"
3/4"
1-1/
8"
Schluter®-DILEX-ASSchluter®-DILEX-AS is a joining profile for creating flexible joints to fixtures such as shower trays, bathtubs, and door and window frames. The profile is made of rigid and soft PVC.
Note: Suitable for tiles 3/16" to 3/8" thick.
(Technical data sheet available at schluter.com)
Standard tub surround requires:• Dilex-AS – 2 units • Inside corner – 2 units• Left end cap – 1 unit • Right end cap – 1 unit
= H
1/4"
2-5/16"
GGrey
GSBlack
SPSandpebble
HBLightbeige
*Color Codes
To complete the item number, add the color code (e.g., AKWS80G).
PGClassicgrey
Schluter®-DILEX-AKWSSchluter®-DILEX-AKWS is a movement profile for tiled coverings. The anchoring legs and vertical side sections, made of aluminum, are connected to a soft, PVC movement zone, which is also the visible surface.
(Technical data sheet available at schluter.com)
End cap
Inside corner
Aluminum (A)
H = tile thickness Item No.
5/16 AKWS80color*11/32 AKWS90color*3/8 AKWS100color*7/16 AKWS110color*1/2 AKWS125color*17/32 AKWS140color*5/8 AKWS160color*13/16 AKWS210color*
Joining profile (PVC)
H = tile thickness Profile
11/32 AS20BW
Color Code
BWBright white
Accessories Item No.
Outside end cap (right) EKR/AS20BWOutside end cap (left) EKL/AS20BWInside corners I/AS20BW2 inside corners + 1 right end cap + 1 left end cap EKI/AS20BW
51For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
51
= H
3/16"
1-3/16"
Schluter®-DILEX-BWASchluter®-DILEX-BWA is a movement profile made of recycled rigid PVC and soft CPE that provides a 3/16"-wide, flexible connection to existing construction elements, such as windows, door frames, thresholds, etc.
(Technical data sheet available at schluter.com)
*Color Codes
BWBrightwhite
HBLightbeige
PGClassicgrey
GGrey
* To complete the item number, add the color code (e.g., BWA80G).
Note: BWA45 is not available in Sand Pebble (SP)
GSBlack
SPSand pebble
Schluter®-DILEX-KSASchluter®-DILEX-KSA is a perimeter joint profile with a stainless steel or aluminum anchoring leg and a 3/8"-wide, soft thermoplastic rubber movement zone that isolates the tile covering from fixed building elements (e.g., window and door frames).
*Color Codes
HBLightbeige
PGClassicgrey
GGrey
GSBlack
* To complete the item number, add the color code (e.g., EKSA80G).
= H
3/8"Aluminum
3/8"Stainless steel
= H
PVC perimeter joint profile
H = tile thickness Item No.
3/16 BWA45color*1/4 BWA60color*5/16 BWA80color*3/8 BWA100color*1/2 BWA125color*
Finishes: Stainless steel (E) Aluminum (A)
H = tile thickness Item No. Item No.
5/16 EKSA80color* AKSA80color*3/8 EKSA100color* AKSA100color*7/16 EKSA110color* AKSA110color*1/2 EKSA125color* AKSA125color*17/32 EKSA140color* AKSA140color*5/8 EKSA160color* -23/32 EKSA185color* -13/16 EKSA210color* -1 EKSA250color* -1-3/16 EKSA300color* -
Rubber insert replacementKSAE/color*
52 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
Cove base (PVC)
Item No.U = floor or wall, O = wall
HKWU7/O7color*HKWU9/O9color*HKWU11/O11color*
Corner movement profile (PVC)
Item No.U = floor or wall, O = wall
EKEU8/O7color*EKEU9/O8color*EKEU11/O10color*EKEU13/O12color*EKEU15/O14color*
GGrey
BWBrightwhite
HBLightbeige
*Color Codes
To complete the item number, add the color code (e.g., HKWU9/O9HB).
PGClassicgrey
U: 7 = 9/32” 9 = 11/32” 11 = 7/16”
O: 7 = 9/32” 9 = 11/32” 11 = 7/16”
= O
= U
r = 11/16"
Schluter®-DILEX-HKWSchluter®-DILEX-HKW is a cove-shaped profile for inside wall corners and floor/wall transitions in applications where only slight movement occurs. The profile’s anchoring legs are made of recycled rigid PVC; the cove section is made of colored PVC.
(Technical data sheet available at schluter.com)
PGClassicgrey
GGrey
BWBrightwhite
SPSand pebble
*Color Codes
To complete the item number, add the color code (e.g., EKEU8/O7BW).
GSBlack
HBLightbeige
= O
= U
3/16"
U: 8 = 5/16” 9 = 11/32” 11 = 7/16” 13 = 33/64” 15 = 9/16”
O: 7 = 9/32” 8 = 5/16” 10 = 3/8” 12 = 1/2” 14 = 17/32”
Schluter®-DILEX-EKESchluter®-DILEX-EKE is a corner movement profile that effectively absorbs movement at inside wall corners and at floor/wall transitions in applications where no large movement is expected. The profile is made of recycled rigid PVC with a soft CPE movement zone.
(Technical data sheet available at schluter.com)
Inside wall corners
Floor/wall transition
Outside corner Inside corner, 3-wayInside corner, 2-way End cap
Accessories Item No.
Outside corner A/HKW/color*Inside corner (2-way) I/HKW2R18/color*Inside corner (3-way) I/HKW3R18/color*End cap E/HKW/G(grey only)
53For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
53
= O
= U
r = 11/16"
GGrey
BWBrightwhite
HBLightbeige
*Color Codes
To complete the item number, add the color code (e.g., HKU12/O9BW).
U: 12 = 1/2"
O: 9 = 11/32"
Schluter®-DILEX-HKSchluter®-DILEX-HK, a cove-shaped profile for floor/wall transitions, is suited for use in commercial bathrooms and the food processing industry. The profile’s anchoring legs are made of recycled rigid PVC; the cove section is made of colored CPE.
Note on inside corner (3-way):To create a cove and trim for 3-way inside corners, Schluter®-DILEX-HK must be used in combination with Schluter®-DILEX-HKW (page 52).
(Technical data sheet available at schluter.com)
Outside corner
Connector
Inside corner, 2-way
End cap
Inside corner, 3-way Schluter®-DILEX-HK integrated with Schluter®-DILEX-HKW (see page 52) to create a 3-way inside corner.
Schluter®-DILEX-HKW (HKWU9/09color*)
Schluter®-DILEX-HK
Schluter®-DILEX-HK
Cove base (PVC)
Item No.U = floor or wall, O = wall
HKU12/O9color*
Accessories Item No.
Outside corner A/HK/color*Inside corner (2-way) I/HK2R18/color*Inside corner (3-way) I/HK3R18/color*Connector V/HKEnd cap (left) EL/HK/G(grey only)End cap (right) ER/HK/G(grey only)
54 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
= H
= H
r = 3/8"
Schluter®-DILEX-AHKSchluter®-DILEX-AHK is an anodized aluminum, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in environments with strict hygienic requirements and where limited movement is expected. The profile features a single anchoring leg design for ease of installation.
(Technical data sheet available at schluter.com)
Finishes: Satin anodized aluminum (AE)
Polished chrome anod. alu. (ACG)
Brushed chrome anod. alu. (ACGB)
Satin nickel anod. alu. (AT)
H = tile thickness Item No. Item No. Item No. Item No.
5/16 AHK1S80AE AHK1S80ACG AHK1S80ACGB AHK1S80AT3/8 AHK1S100AE AHK1S100ACG AHK1S100ACGB AHK1S100AT1/2 AHK1S125AE AHK1S125ACG AHK1S125ACGB AHK1S125AT9/16 - - - AHK1S150AT
Finishes: Polished nickel anod. alu. (ATG)
Brushed nickel anod. alu. (ATGB)
Satin copper/bronze anod. alu. (AK)
Polished copper/bronze anod. alu. (AKG)
H = tile thickness Item No. Item No. Item No. Item No.
5/16 AHK1S80ATG AHK1S80ATGB AHK1S80AK AHK1S80AKG3/8 AHK1S100ATG AHK1S100ATGB AHK1S100AK AHK1S100AKG1/2 AHK1S125ATG AHK1S125ATGB AHK1S125AK AHK1S125AKG
Finishes: Brushed copper/bronze anod. alu. (AKGB)
Satin brass anod. alu. (AM)
Polished brass anod. alu. (AMG)
Brushed brass anod. alu. (AMGB)
H = tile thickness Item No. Item No. Item No. Item No.
5/16 AHK1S80AKGB AHK1S80AM AHK1S80AMG AHK1S80AMGB3/8 AHK1S100AKGB AHK1S100AM AHK1S100AMG AHK1S100AMGB1/2 AHK1S125AKGB AHK1S125AM AHK1S125AMG AHK1S125AMBG
Finishes: Brushed graphite anod. alu. (AGRB)
Tuscan beige color-coated alu. (TSB)
Tuscan bronze color-coated alu. (TSOB)
Tuscan pewter color-coated alu. (TSG)
H = tile thickness Item No. Item No. Item No. Item No.
5/16 AHK1S80AGRB AHK1S80TSB AHK1S80TSOB AHK1S80TSG3/8 AHK1S100AGRB AHK1S100TSB AHK1S100TSOB AHK1S100TSG1/2 AHK1S125AGRB AHK1S125TSB AHK1S125TSOB AHK1S125TSG9/16 AHK1S150AGRB - - -
Corners, connectors and end caps are available for this product, please refer to the table on page 55.
55For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
Accessories Item No.
Corners for AE, AM, AT, and AKOutside corners, 90° E90/AHK1S/finish*Outside corners, 135° E135/AHK1S/finish*Inside corners, 90° I90/AHK1S/finish*Inside corners, 135° I135/AHK1S/finish*Connector V/AHKEnd cap E/AHK1S/finish*
Corners for ACG, AMG, AKG, ATG, ACGB, AMGB, AKGB, ATGB, and AGRBOutside corners, 90° E90/AHK1S/finish*Outside corners, 135° E135/AHK1S/finish*Inside corners, 90° I90/AHK1S/finish*Inside corners, 135° I135/AHK1S/finish*Connector V/AHKEnd cap E/AHK1S/finish*
Corners for TSB, TSOB, and TSGOutside corners, 90° E90/AHK1S/finish*Outside corners, 135° E135/AHK1S/finish*Inside corners, 90° I90/AHK1S/finish*Inside corners, 135° I135/AHK1S/finish*Connector V/AHKEnd cap E/AHK1S/finish*
= H
= H
r = 3/8"
Schluter®-DILEX-AHKSchluter®-DILEX-AHK is an anodized aluminum, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in environments with strict hygienic requirements and where limited movement is expected. The profile features a single anchoring leg design for ease of installation.
(Technical data sheet available at schluter.com)
* To complete the item number, add the finish code (e.g., E90/AHK1S/AE).
Inside corner, 2- or 3-way (90º or 135º)
Connector
Outside corner (90º or 135º)
End cap
Outside corner, square (90º)
Accessories Item No.
Corners for AE and ATOutside corners square, 90° E90Q/AHK1S/finish*
Corners for ACGOutside corners square, 90° E90Q/AHK1S/finish*
Corners for TSB, TSOB, and TSGOutside corners square, 90° E90Q/AHK1S/finish*
56 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
Schluter®-DILEX-AHKA
r = 3/8"
= H
Schluter®-DILEX-AHKA is an anodized aluminum, cove-shaped profile for transitions between walls to be tiled and previously finished floors. DILEX-AHKA prevents surface water penetration and meets the maintenance and hygienic requirements of commercial kitchens, bathrooms, and food-processing plants, or any tiled environment where a sanitary cove base is desired. DILEX-AHKA integrates with the Schluter®-DILEX-AHK and Schluter®-RONDEC profiles at 90° inside and outside vertical wall corners, respectively.
Finishes: Satin anodized aluminum (AE)
Brushed chrome anod. alu. (ACGB)
Satin nickel anod. alu. (AT)
Brushed nickel anod. alu. (ATGB)
H = tile thickness Item No. Item No. Item No. Item No.
5/16 AHKA80AE AHKA80ACGB AHKA80AT AHKA80ATGB3/8 AHKA100AE AHKA100ACGB AHKA100AT AHKA100ATGB1/2 AHKA125AE AHKA125ACGB AHKA125AT AHKA125ATGB9/16 AHKA150AE AHKA150ACGB AHKA150AT AHKA150ATGB
Inside corner (90º or 135º)
End cap
Outside corner (90º or 135º)
90º inside corners can be used 2-way, or 3-way when combined with DILEX-AHK on the vertical inside corner.
Accessories Item No.
Corners for AE and ATOutside corners, 90° E90/AHKA/color*Outside corners, 135° E135/AHKA/color*Inside corners, 90° I90/AHKA/color*Inside corners, 135° I135/AHKA/color*End cap (left) EL/AHKA/color*End cap (right) ER/AHKA/color*
Corners for ACGB and ATGBOutside corners, 90° E90/AHKA/color*Outside corners, 135° E135/AHKA/color*Inside corners, 90° I90/AHKA/color*Inside corners, 135° I135/AHKA/color*End cap (left) EL/AHKA/color*End cap (right) ER/AHKA/color*
New product
57For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
Schluter®-DILEX-PHK
Connector
= H
r = 3/8"
= H
Outside corner (90º or 135º)
End cap
Schluter®-DILEX-PHK is a PVC, cove-shaped profile for inside wall corners, countertop/backsplash transitions and floor/wall transitions in applications where limited movement is expected. DILEX-PHK provides a 3/8" radius to prevent the accumulation of dirt and makes cleaning simple. DILEX-PHK prevents surface water penetration and meets the maintenance and hygienic requirements of commercial kitchens, bathrooms, food processing plants, or any tiled environment where a sanitary cove base is desired.
Finishes: Cove base profile (PVC)
H = tile thickness Item No.
5/16 PHK1S80color*3/8 PHK1S100color*1/2 PHK1S125color*
Inside corner (90º or 135º)
90º inside corners can be used 2-way or 3-way.
*Color Codes
BWBright white
WWhite
SPSandpebble
* To complete the item number, add the color code (e.g., PHK 1S 80 BW).
BHBahama
HBLightbeige
PGClassicgrey
GGrey
Accessories Item No.
Outside corners, 90° E90/PHK1Scolor*Outside corners, 135° E135/PHK1Scolor*Inside corners, 90° I90/PHK1Scolor*Inside corners, 135° I135/PHK1Scolor*Connector V/PHKEnd cap E/PHK1Scolor*
58 For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
Finishes: Stainless steel (E) Brushed stainless steel (EB)
Accessories Item No. Item No.
Outside corners, 90° A/EHK2R18 A/EBHK2R18Outside corners, 135° E135/EHK2R18 E135/EBHK2R18Inside corners, 90° (2-way) I/EHK2R18 I/EBHK2R18Inside corners, 90° (3-way) I/EHK3R18 I/EBHK3R18Inside corners, 135° I135/EHK2R18 I135/EBHK2R18Connector V/EHK V/EBHKEnd cap E/HKW/G (Grey PVC only) E/HKW/G (Grey PVC only)
Stainless steel (E) Brushed stainless steel (EB)
Item No.U = floor or wall, O - wall
Item No.U = floor or wall, O - wall
EHKU7/O7 EBHKU7/O7EHKU9/O9 EBHKU9/O9EHKU11/O11 EBHKU11/O11
= U
= O
r = 23/32"
U: 7 = 9/32" 9 = 11/32" 11 = 7/16"
O: 7 = 9/32" 9 = 11/32" 11 = 7/16"
Schluter®-DILEX-EHKSchluter®-DILEX-EHK is a stainless steel cove-shaped profile for inside wall corners or for floor/wall transitions with strict hygienic requirements.
(Technical data sheet available at schluter.com)
Outside corner (90º or 135º) Inside corner, 3-way (90º)Inside corner, 2-way (90º or 135º)
Connector End cap
59For more information, please call: 800-267-1923
All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.
M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S
Schluter®-DILEX-HKUSchluter®-DILEX-HKU is a stainless steel, cove-shaped profile for inside wall corners and floor/wall (including countertop/ backsplash) transitions. DILEX-HKU may be used with floor coverings other than ceramic and stone tile, provided the floor coverings are fastened or adhered (i.e., no floating floors). The profile features a single anchoring leg that turns inward, which allows the DILEX-HKU to be used with different thicknesses of tile. A 3/8" radius cove section forms the visible surface and prevents the accumulation of dirt, making cleaning simple. DILEX-HKU prevents surface water penetration and meets the maintenance and hygienic requirements of commercial kitchens, bathrooms, and food processing plants, or any tiled environment where a sanitary cove base is desired.
(Technical data sheet available at schluter.com)
r = 3/8"
5/16"
3/4"
5/8"
5/16
"
Outside corner (90° or 135°) ConnectorInside corner (90° or 135°)
Note: DILEX-HKU outside and inside corners are made of stainless steel, 316 L (1.4404 = V4A).
Finishes: Stainless steel (E) Stainless steel 316L (1.4404 = V4A) (E)
Brushed stainless steel (EB)
Accessories Item No. Item No. Item No.
Outside corners, 90° EQ/HKUR10E EQ/HKUR10E EQ/HKUR10EBOutside corners, 135° E135/HKUR10E E135/HKUR10E E135/HKUR10EBInside corners, 90° (2 or 3-way) I/HKU3R10E I/HKU3R10E I/HKU3R10EBInside corners, 135° I135/HKUR10E I135/HKUR10E I135/HKUR10EBConnector V/HKUR10E V/HKUR10E V/HKUR10EB
Finishes: Stainless steel 304 (1.4301 = V2A) (E)
Stainless steel 316L (1.4404 = V4A) (E)
Brushed stainless steel 304 (1.4301 = V2A) (EB)
H = tile thickness Item No. Item No. Item No.
3/8 HKUR10E HKUR10E/V4A HKUR10EB
New product
Schluter®-KERDI-BOARD
60 For more information, please call: 800-267-1923
No minimum required. Please check your electronic catalog system for pricing.
Schluter®-KERDI-BOARD
Schluter®-KERDI-BOARD
61For more information, please call: 800-267-1923
No minimum required. Please check your electronic catalog system for pricing.
Schluter®-KERDI-BOARDSchluter®-KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used for creating bonded waterproofing assemblies with tile coverings. It consists of an extruded polystyrene foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in thin-set mortar.
1/2"
Substrate and building panel
H = in. Item No. Panels /Bundle
Panel dimension: 48" x 32"1/2 KB121220812 18
Schluter®-KERDI-BOARD-SNSchluter®-KERDI-BOARD-SN is a prefabricated shower niche made of Schluter®-KERDI-BOARD that can be installed in both Schluter®-KERDI and Schluter®-KERDI-BOARD wall assemblies. The shower niche features a 1/2" -thick by 2" -wide integrated bonding flange and is available in 4 different sizes. Larger sizes include a prefabricated KERDI-BOARD shelf that can be installed at any height to create separate compartments within the shower niche if desired.
Niche
Item No. Size Depth Shelf
KB12SN305152A 12" x 6" 3-1/2" -KB12SN305305A 12" x 12" 3-1/2" -KB12SN305508A1 12" x 20" 3-1/2" 1KB12SN305711A1 12" x 28" 3-1/2" 1
Schluter®-KERDI-BOARD-ZT/-ZSSchluter®-KERDI-BOARD-ZT are galvanized steel washers used to fasten KERDI-BOARD to stud framing. They feature tabs that penetrate the surface of the KERDI-BOARD and temporarily hold the washers in place to enable quick installation of the corresponding screws.Schluter®-KERDI-BOARD-ZS are screws used to fasten KERDI-BOARD to stud framing with the corresponding washers.
Schluter®-KERDI-BOARD-ZT/-ZSWasher and Screw Set
Item No. Pieces /Box
KBZS35GT32Z 40 each
1-1/4"
1-5/8"
62 For more information, please call: 800-267-1923
U N C O U P L I N G M E M B R A N E S
Schluter®-TROBASchluter®-DITRA
H = 1/8"
Schluter®-DITRA and Schluter®-DITRA-XL are polyethylene uncoupling membranes with a grid structure of square cutback cavities and an anchoring fleece laminated to the underside. DITRA and DITRA-XL provide uncoupling through the open rib structure, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface. Schluter®-DITRA is 1/8"-thick, which minimizes tile assembly thickness and reduces transitions to lower surface coverings (e.g., carpet, engineered wood, and vinyl). DITRA allows for ceramic tile application over single-layer plywood or OSB subfloors on joists spaced up to 19.2" o.c. DITRA is listed by cUPC®.
Schluter®-DITRA-XL is 5/16" thick, which permits even transitions between tile and 3/4"-thick hardwood flooring. DITRA-XL allows for ceramic tile application over single-layer plywood/OSB subfloors on joists spaced up to 24" o.c.
(Technical data sheet available at schluter.com)
Schluter®-DITRA and Schluter®-DITRA-XL
H = 7 mm - 5/16"H = 7 mm - 5/16"H =
5/16"
Schluter®-DITRA Installation Handbook
The Schluter®-DITRA Installation Handbook contains complete details and illustrations for tile installations over various substrates, and supplementary information on topics such as waterproofing, movement joints, and thin-set mortars.
To obtain or download a free copy of the DITRA Installation Handbook, visit www.schluter.com or call 800-267-1923.
DITRA (1/8")
Item No. Dimensions
DITRA5M 3' 3" x 16' 5" = 54 ft2
DITRA150 3' 3" x 45' 9" = 150 ft2
DITRA30M 3' 3" x 98' 5" = 323 ft2
DITRA-XL (5/16")
Item No. Dimensions
DITRA-XL/175 3' 3" x 53' 3" = 175 ft2
63For more information, please call: 800-267-1923
U N C O U P L I N G M E M B R A N E S
No minimum required. Please check your electronic catalog system for pricing.
63
Schluter®-DITRA-TROWEL Used to install the DITRA membrane, the DITRA-TROWEL features an 11/64" x 11/64" square-notched design.
Trowel
Item No. Notch Size Pkg
TRL-DIT 11/64" x 11/64" 1 unit
Schluter®-KERDI-FLEXSchluter®-KERDI-FLEX is a flexible waterproofing strip for sealing KERDI and DITRA seams over movement joints or flexible edge joints.
(Technical data sheet available at schluter.com)
Waterproofing strip for use above movement joints
Item No. Width Length Thickness
FLEX125/5M 5" 16' 5" 12 milFLEX250/5M 10" 16' 5" 12 milFLEX125/30 5" 98' 5" 12 milFLEX250/30 10" 98' 5" 12 mil
Schluter®-TROBASchluter®-TROBA is a reliable and durable sub-surface drainage system for use over horizontal waterproofing layers. It consists of a pressure-stable, polyethylene sheet with perforated studs, which enable the water to flow freely to the sloped waterproofing layer and on to the designated drainage exit.
(Technical data sheet available at schluter.com)H =
9/32"
Schluter®-TROBA-PLUSSchluter®-TROBA-PLUS is a durable subsurface drainage system that permits water to drain off freely and reliably. The closely positioned, cone-shaped studs are covered by a water permeable filter fabric. They serve to support the floor covering over the entire surface, thus creating a continuous drainage area above the waterproofing layer.
(Technical data sheet available at schluter.com)H =
5/16"
Sub-surface drainage system
Item No. Dimensions
TROBA-RO 3' 3" x 65' 7" = 215 ft2
TROBA-MA 3' 3" x 3' 3" = 10.73 ft2
Sub-surface drainage system
Item No. Dimensions
TROBA-PLUS8 3' 3" x 41' = 135 ft2
64 For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
64
Schluter®-KERDI-DRAIN Schluter®-KERDI-SHOWER-KIT
Schluter®-KERDI-LINE
65For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
Note: 1 mil = one thousandth of an inch
Schluter®-KERDI-BANDSchluter®-KERDI-BAND is a waterproofing strip used to seal butt joints and floor/wall connections with the KERDI and DITRA mattings.
(Technical data sheet available at schluter.com)
Schluter®-KERDI-TROWEL Used to install the Schluter®-KERDI membrane, the KERDI-TROWEL features a 1/8” x 1/8” square-notched design.
Note: 1 mil = one thousandth of an inch
Schluter®-KERDISchluter®-KERDI is a polyethylene, waterproofing membrane, equipped with an anchoring fleece on both sides. It is suitable for waterproofing in conjunction with tiled surfaces on walls and floors. Schluter®-KERDI is listed by cUPC® and evaluated by ICC-ES (Report No. ESR-2467).
(Technical data sheet available at schluter.com)
H = 8 mil
KERDI (8 mil)
Item No. Dimensions
KERDI200/5M 3' 3" x 16' 5" = 54 ft2
KERDI200/10M 3' 3" x 33' = 108 ft2
KERDI200/20M 3' 3" x 65' 7" = 215 ft2
KERDI200 3' 3" x 98' 5" = 323 ft2
Waterproofing strip
Item No. Width Length Thickness
KEBA100/125/5M 5" 16' 5" 4 milKEBA100/125/10M 5" 33' 4 milKEBA100/185/5M 7-1/4" 16' 5" 4 milKEBA100/250/5M 10" 16' 5" 4 milKEBA100/125 5" 98' 5" 4 milKEBA100/185 7-1/4" 98' 5" 4 milKEBA100/250 10" 98' 5" 4 mil
Trowel
Item No. Notch Size Pkg
TRL-KER 1/8" x 1/8" 1 unit
Schluter®-SHOWER SYSTEM Installation Handbook
The Schluter®-SHOWER SYSTEM Installation Handbook contains complete details and illustrations for various tiled shower applications, and supplementary information on topics such as vapor (including steam showers and bathtub surrounds), mold, barrier-free showers, profiles, and thin-set mortars.
To obtain or download a free copy of the SHOWER SYSTEM Installation Handbook, visit www.schluter.com or call 800-267-1923.
66 For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
Note: 1 mil = one thousandth of an inch
Schluter®-KERDI-KERECK-FSchluter®-KERDI-KERECK-F are preformed corners made of KERDI for waterproofing inside and outside corners.
(Technical data sheet available at schluter.com)
Schluter®-KERDI-SEAL-PS/-MVSchluter®-KERDI-SEAL-PS/-MV prefabricated seals with overmolded rubber gaskets are cut sections of the Schluter®-KERDI waterproofing membrane designed to seal protrusions through the Schluter®-KERDI or Schluter®-DITRA/DITRA-XL membranes.
(Technical data sheet available at schluter.com)-PS -MV
Note: 1 mil = one thousandth of an inch
Waterproofing for corners
Item No. Thickness Packaging
KERECK/FI2 4 mil 2 Inside cornersKERECK/FA2 4 mil 2 Outside cornersKERECK/FI10 4 mil 10 Inside cornersKERECK/FA10 4 mil 10 Outside corners
KERDI-SEAL-PS - Pipe seal
Item No. Pipe nipple opening diam. Thickness Packaging
KMS185/12 1/2" 4 mil 1 unitKMS185/20 3/4" 4 mil 1 unit
KERDI-SEAL-MV - Mixing valve seal
Item No. Mixing valve opening diam. Thickness Packaging
KMSMV235/114 4-1/2" 4 mil 1 unit
Inside corner (FI) Outside corner (FA)
Note: 1 mil = one thousandth of an inch
Schluter®-KERDI-KMSchluter®-KERDI-KM is a is a pipe collar designed to be used in conjunction with the Schluter®
-KERDI or Schluter®-DITRA mattings to seal around pipes or other similar elements that penetrate the waterproofing layer.
(Technical data sheet available at schluter.com)
Pipe seal
Item No. Dimensions Thickness Packaging
KM5117/22 7" x 7"(Pipe nipple opening diam. - 7/8") 4 mil 5 units
BWBrightwhite
GGrey
*Color Codes
Schluter®-KERDI-FIXSchluter®-KERDI-FIX is a single-component sealing and bonding compound with a silane-modified polymer base. Schluter®-KERDI-FIX is suitable for the bonding of Schluter®-KERDI waterproofing membrane in overlapping areas and at connections to building elements. Schluter®-KERDI-FIX is also suitable for sealing or as a joint filing compound.
Cartridge (290 ml)
Item No.
KERDIFIX/color*
67For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
KERDI-SEAL-MV - Mixing valve seal
Item No. Mixing valve opening diam. Thickness Packaging
KMSMV235/114 4-1/2" 4 mil 1 unit
Schluter®-KERDI-DRAIN is a floor drain with an integrated bonding flange that provides a large contact area for a secure connection to the Schluter®-KERDI waterproofing membrane, as well as other bonded waterproof membranes, at the top of the assembly. KERDI-DRAIN is appropriate for both mortar bed and Schluter®-KERDI-SHOWER-ST shower tray applications. The bonding flange is sloped to simplify mortar bed installation. KERDI-DRAIN features a fully adjustable grate (available in stainless steel and anodized aluminum in various finishes) that accommodates a wide range of tile thicknesses: 1/4” to 1-1/4”. The grate assembly allows lateral and tilt adjustment as well. Simple connection to standard 2” drain outlets makes KERDI-DRAIN ideal for new construction and renovations. KERDI-DRAIN is listed by UPC®, CSA, and NSF.
(Technical data sheet available at schluter.com)
Schluter®-KERDI-DRAIN
Subfloor
Mortar bed orKERDI SHOWER-ST tray Tile
KERDI MEMBRANE
Note: Phillips head screws are included with the KERDI-DRAIN. If you require tamper-proof screws, they must be purchased seperately.
Tamper proof screws
Item No. Description
KD/TPSCRW Tamper proof screwKD/TPWRCH Wrench
4" Grate Options
Tileable Covering Support Anodized Aluminum Stainless Steel
Brushed nickel(ATGB)
Brushed copper/bronze(AKGB)
Brushed brass(AMGB)
Stainless steel (E)
Oil-rubbedbronze(EOB)
Flange Options
ABS - 2" or 3" Outlet PVC - 2" or 3" Outlet
6" Grate Options
Stainless Steel
Note: Please reference the ordering tables for drain assemblies that have listings with UPC®, CSA, and NSF.
Note: Please reference page 68-70 for model numbers.
(6E) (6RE)
Patent pending
3-15/16"
3-3/8"
1/4" 3/4"
5-1/2"
3-11/16"
11-13/16"
4-1/16"
4-5/16"
2-5/8"
1-9/16"7/8"
1
3
4
3-7/8"
2 3-5/8"
2-15/16"
1-7/16"
Grate
Height adjustment collar
Lateral adjustment collar
Fleeced bonding flange
2
3
4
1
(ECS)
68 For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
2" Drain Outlet
Grate finish ABS - 2" PVC - 2"
4" Square GrateTileable covering support (ECS)* KD2/ABS/ECS2 KD2/PVC/ECS2
Stainless steel(E) KD2/ABS/E1 KD2/PVC/E1
Oil-rubbed bronze stainless steel (EOB) KD2/ABS/EOB KD2/PVC/EOB
Brushed brassanod. alu. (AMGB) KD2/ABS/AMGB1 KD2/PVC/AMGB1
Brushed copper/ bronzeanod. alu. (AKGB) KD2/ABS/AKGB1 KD2/PVC/AKGB1
Brushed nickelanod. alu. (ATGB) KD2/ABS/ATGB1 KD2/PVC/ATGB1
6" Square or Round GrateSquare grate
stainless steel (6E) KD2/ABS/6E1 KD2/PVC/6E1
Round gratestainless steel (6RE) KD2/ABS/6RE1 KD2/PVC/6RE1
3" Drain Outlet
Grate finish ABS - 3" PVC - 3"
6" Square or Round GrateSquare grate
stainless steel (6E) KD3/ABS/6E1 KD3/PVC/6E1
Round gratestainless steel (6RE) KD3/ABS/6RE1 KD3/PVC/6RE1
Schluter®-KERDI-DRAIN - Components - ABS or PVC Flange
Includes Description Quantity
KERDI-DRAIN Drain, with integrated bonding flange and grate assembly 1
KERDI-KERECK-F Preformed waterproofing corners 4 inside and 2 outside
KERDI-SEAL-PS Pipe seal (3/4") 1
KERDI-SEAL-MV Mixing valve seal 1
1
2
3
4
1
432
1 Listed by UPC®, CSA, and NSF. 2 Listed by NSF and CSA. UPC listing in progress, please check www.schluter.com for the most up-to-date information.* Patent pending
DRAIN KITS - ABS or PVC FLANGE - 2" OR 3" OUTLET
69For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
Grate Kits
Finish Item No.
4" Square Grate
Tileable covering support (ECS)* KD2/ECS/GR
Stainless steel (E) KD2/E/GR
Oil-rubbed bronze stainless steel (EOB) KD2/EOB/GR
Brushed brass anod. alu. (AMGB) KD2/AMGB/GR
Brushed copper/ bronze anod. alu. (AKGB) KD2/AKGB/GR
Brushed nickel anod. alu. (ATGB) KD2/ATGB/GR
6" Square or Round Grate
Square grate stainless steel (6E) KD2/6E/GR
Round grate stainless steel (6RE) KD2/6RE/GR
Grate Kit - Components
Includes Description Quantity
Grate Assembly a) For stainless steel and aluminum grates1
b) For tileable covering support
KERDI-KERECK-F Preformed waterproofing corners 4 inside and 2 outside
KERDI-SEAL-PS Pipe seal (3/4") 1
KERDI-SEAL-MV Mixing valve seal 1
2
3
4
1a
432
Flange Kits
Material Item No.
2" Drain Outlet
ABS KD2/ABS/FL
PVC KD2/PVC/FL
3" Drain Outlet
ABS KD3/ABS/FL
PVC KD3/PVC/FL
Flange Kit - Components
Includes Quantity
Drain with integrated bonding flange 1
GRATE & FLANGE KITS (sold separately)
1b
1a 1b
iPlease note that flanges with 3" outlets are intended for use with 6" grates as these combinations have listings and certifications while flanges with 3" outlet combined with 4" grates do not. Please refer to the table below.
Patent pending
Product Listings and Certifications Table
Schluter®-KERDI-DRAIN - Listings and Certifications
Bonding Flange 2" OutletGrate - 4" Grate - 6"
E EOB AMGB AKGB ATGB ECS* 6E 6RE
ABS / PVC 1 - 1 1 1 2 1 1Stainless steel 1 - 1 1 1 2 1 1
Bonding Flange 3" OutletGrate - 6"
6E 6RE
ABS / PVC 1 1Stainless steel 1 1
Various configurations of KERDI-DRAIN are listed by UPC®, CSA, and NSF as shown in the table above. 1 - Listed by UPC®, CSA, and NSF2 - Listed by CSA* Patent pendingFor copies of these documents, please contact Schluter®-Systems at 800-472-4588 (USA) or 800-667-8746 (Canada) or by email at [email protected]. Links to the documents can also be accessed at www.schluter.com.
70 For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
with residential adaptor ring
The residential adaptor ring is used to convert a traditional residential clamping ring drain to an integrated bonding flange drain when removal of the clamping ring drain is not practical. A stainless steel adaptor ring with an overmolded rubber gasket replaces the clamping ring and is sealed to the existing drain body using Schluter®-KERDI-FIX. The bonding flange then slides into the adaptor ring and seals against the rubber gasket. The KERDI-DRAIN with residential adaptor ring features an ABS bonding flange and is suitable for both mortar bed and Schluter®-KERDI-SHOWER-ST shower tray applications.
Schluter®-KERDI-DRAIN
Residential Adaptor Kits - ABS Flange
Grate finish ABS bonding flange
4" Square GrateStainless steel
(E) KDAR/ABS/E
Oil-rubbed bronze stainless steel (EOB) KDAR/ABS/EOB
Brushed brassanod. alu. (AMGB) KDAR/ABS/AMGB
Brushed copper/ bronzeanod. alu. (AKGB) KDAR/ABS/AKGB
Brushed nickelanod. alu. (ATGB) KDAR/ABS/ATGB
Schluter®-KERDI-DRAIN with residential adaptor ring and ABS flange
Includes Description Quantity
KERDI-DRAINDrain, with integrated bonding flange and grate assembly
1
Adaptor ring* For residential clamping ring drains 1
KERDI-KERECK-F Preformed waterproofing corners 4 inside and 2 outside
KERDI-SEAL-PS Pipe seal (3/4") 1
KERDI-SEAL-MV Mixing valve seal 1
KERDI-FIX Sealing and bonding compound (66 ml) 1
1
2
3
4
1
43
2
6
5
* D Schluter-Systems L.P., U.S. patent No. D593,641, other patents pending
KERDI-DRAIN WITH RESIDENTIAL ADAPTOR RING - standard ABS bonding flange
6
5
71For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
Schluter®-KERDI-SHOWER-STSchluter®-KERDI-SHOWER-ST is a sloped shower tray made of lightweight, expanded polystyrene (PS 40) for constructing mortar-free shower receptors. It is specifically designed to integrate with the Schluter®-KERDI-SHOWER-SC, KERDI, and KERDI-DRAIN.
Schluter®-KERDI-SHOWER-SCSchluter®-KERDI-SHOWER-SC is a lightweight, expanded polystyrene (PS 40) shower curb specifically designed to integrate with Schluter®-KERDI-SHOWER-ST, KERDI, and KERDI-DRAIN.
Schluter®-KERDI-SHOWER-SRSchluter®-KERDI-SHOWER-SR is a lightweight, expanded polystyrene (PS 40) shower ramp specifically designed to integrate with Schluter®-KERDI-SHOWER-ST, KERDI, and KERDI-DRAIN.
Prefabricated EPS tray
Item No. Dimensions Perimeter height Drain placement
ST122 48" x 48" 1-1/2" centerST-183 72" x 72" 1-1/2" centerST-81/152 32" x 60" 1-3/4" centerST-81/152BR 32" x 60" 1-1/2" off-center
Prefabricated EPS curb
Item No. Dimensions
SC122 48" x 6" x 4-1/2"
Prefabricated EPS ramp
Item No. Dimensions
SR122 48" x 15-7/8"
Note: Tray ST-81/152 BR features off-center drain placement: 10" o.c. from end of tray.
48" x 48"
ST-122
32" x 60"
ST-81/152
32" x 60"
ST-81/152 BR
72" x 72"
ST-183
48"
6"
6"
4-1/2"
1-1/2"1/4"
15-13/16"
15-7/8"
72 For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
Schluter®-KERDI-SHOWER-SBSchluter®-KERDI-SHOWER-SB are lightweight, expanded polystyrene shower benches specifically designed to integrate with the Schluter®-Shower System. They are stable and load bearing, feature sloped surfaces, and are quick and easy to install.
20
16 16
19-13/16
BENCH TRIANGLE 16in. x 16in.
SB4116" 16"
20"19-13/16"
11-1/2
32
20
19-13/16
BENCH 11-1/2in. x 32in.
SB2981
19-13/16"
20"
11-1/2"
32"
20
11-1/2
48
19-13/16
BENCH 11-1/2in. x 48in.
SB29122
19-13/16"
20"
11-1/2"
48"
20
16
32
19-3/4
BENCH 16in. x 32in.
SB4181
19-3/4"
20"
16"32"
20
16
48
19-3/4
BENCH 16in. x 48in.
SB41122
19-3/4"
20"
16"
48"
Prefabricated EPS bench
Item No. Width Depth Height Shape
SB41 16" 16" 20" TriangularSB2981 32" 11-1/2" 20" RectangularSB29107 42" 11-1/2" 20" RectangularSB29122 48" 11-1/2" 20" RectangularSB4181 32" 16" 20" RectangularSB41122 48" 16" 20" Rectangular
20
11-1/2
42
19-13/16
BENCH 11-1/2n. x 42in.
SB29107
19-13/16"
20"20"
42"
11-1/2"
Schluter®-KERDI-BOARD-SNSchluter®-KERDI-BOARD-SN is a prefabricated shower niche made of Schluter®-KERDI-BOARD that can be installed in both Schluter®-KERDI and Schluter®-KERDI-BOARD wall assemblies. The shower niche features a 1/2" -thick by 2" -wide integrated bonding flange and is available in 4 different sizes. Larger sizes include a prefabricated KERDI-BOARD shelf that can be installed at any height to create separate compartments within the shower niche if desired.
Niche
Item No. Size Depth Shelf
KB12SN305152A 12" x 6" 3-1/2" -KB12SN305305A 12" x 12" 3-1/2" -KB12SN305508A1 12" x 20" 3-1/2" 1KB12SN305711A1 12" x 28" 3-1/2" 1
73For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
Schluter®-KERDI-SHOWER-KIT is an all-inclusive package containing each of the integrated family of components required to create a maintenance-free, watertight shower assembly without a mortar bed.
Complete installation instructions are available at www.schluter.com
2
1
4
3
5
Schluter®-KERDI-SHOWER-KIT
6
3
4
7
5
1
2
66
8
9
KERDI-SHOWER-ST Prefabricated, sloped tray
KERDI-SHOWER-SC Prefabricated curb
KERDI Waterproofing membrane
KERDI-BAND Waterproofing strip
KERDI-DRAIN Floor drain with a sloped, integrated bonding flange, 2” outlet, 4” grate
KERDI-KERECK-F Pre-formed waterproofing corners
KERDI-SEAL-PS Pipe seal
KERDI-SEAL-MV Mixing valve seal
Schluter®-EHK/-HKW/-AHK Cove-base profile (optional)
1
2
3
4
5
6
7
8
9
7 8
Schluter®-KERDI-SHOWER-KIT
Includes DescriptionQuantity
48" x 48" 72" x 72" 32" x 60"
KERDI-SHOWER-ST Shower Tray 1 1 1KERDI-SHOWER-SC Shower Curb 48" x 6" x 4-1/2" 1 2 2KERDI 10 M Waterproofing membrane 3' 3" x 33' = 108 ft2 1KERDI 12 M Waterproofing membrane 3' 3" x 39' 4" = 128 ft2 1KERDI 20 M Waterproofing membrane 3' 3" x 65' 7" = 215 ft2 1KERDI-BAND Waterproofing strip 5" x 33' 1 2 1KERDI-DRAIN Drain, with integrated bonding flange with 2" outlet 1 1 1KERDI-KERECK-F Preformed waterproofing corners 4 inside and 2 outsideKERDI-SEAL-PS Pipe seal (3/4") 1KERDI-SEAL-MV Mixing valve seal 1
1
2
3
4
5
6
7
8
74 For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
48"
48"
72"
72"
72" x 72" Kit - Select material for drain (ABS or PVC) and grate finish
Item No. DrainMaterial Grate finish
KK183ABSECS ABS Tileable covering support*KK183ABSE ABS Stainless steel 304 (1.4301 = V2A)KK183ABSEOB ABS Oil-rubbed bronze stainless steelKK183ABSATGB ABS Brushed nickel anodized aluminumKK183ABSAKGB ABS Brushed copper/bronze anod. alu.KK183ABSAMGB ABS Brushed brass anodized aluminumKK183PVCECS PVC Tileable covering support*KK183PVCE PVC Stainless steel 304 (1.4301 = V2A) KK183PVCEOB PVC Oil-rubbed bronze stainless steelKK183PVCATGB PVC Brushed nickel anodized aluminumKK183PVCAKGB PVC Brushed copper/bronze anod. alu.KK183PVCAMGB PVC Brushed brass anodized aluminum
48" x 48" Kit - Select material for drain (ABS or PVC) and grate finish
Item No. DrainMaterial Grate finish
KK122ABSECS ABS Tileable covering support* KK122ABSE ABS Stainless steel 304 (1.4301 = V2A)KK122ABSEOB ABS Oil-rubbed bronze stainless steelKK122ABSATGB ABS Brushed nickel anodized aluminumKK122ABSAKGB ABS Brushed copper/bronze anod. alu.KK122ABSAMGB ABS Brushed brass anodized aluminumKK122PVCECS PVC Tileable covering support* KK122PVCE PVC Stainless steel 304 (1.4301 = V2A) KK122PVCEOB PVC Oil-rubbed bronze stainless steelKK122PVCATGB PVC Brushed nickel anodized aluminumKK122PVCAKGB PVC Brushed copper/bronze anod. alu.KK122PVCAMGB PVC Brushed brass anodized aluminum
* Patent pending
60"
32"
32" x 60" Kit - Select material for drain (ABS or PVC) and grate finish
Item No. DrainMaterial Grate finish
KK81152ABSECS ABS Tileable covering support*KK81152ABSE ABS Stainless steel 304 (1.4301 = V2A)KK81152ABSEOB ABS Oil-rubbed bronze stainless steelKK81152ABSATGB ABS Brushed nickel anodized aluminumKK81152ABSAKGB ABS Brushed copper/bronze anod. alu.KK81152ABSAMGB ABS Brushed brass anodized aluminumKK81152PVCECS PVC Tileable covering support*KK81152PVCE PVC Stainless steel 304 (1.4301 = V2A) KK81152PVCEOB PVC Oil-rubbed bronze stainless steelKK81152PVCATGB PVC Brushed nickel anodized aluminumKK81152PVCAKGB PVC Brushed copper/bronze anod. alu.KK81152PVCAMGB PVC Brushed brass anodized aluminum
75For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
Schluter®-KERDI-SHOWER-KIT without the drain is a kit containing the same components as the complete KERDI-SHOWER-KIT, with the exception of the KERDI-DRAIN which must be purchased separately (see pages 75-78). This kit allows you to select the drain that is best suited to your application (i.e. KERDI-DRAIN with 3" outlet or KERDI-DRAIN with residential adaptor ring).
Complete installation instructions are available at www.schluter.com
Schluter®-KERDI-SHOWER-KIT without the drain
2
1
4
3
60"
32"
Note: Tray features off-center drain placement:10" o.c. from end of tray.
32" x 60" Kit with off-center drain - Select material for drain (ABS or PVC) and grate finish
Item No. DrainMaterial Grate finish
KKB81152ABSECS ABS Tileable covering support*KKB81152ABSE ABS Stainless steel 304 (1.4301 = V2A)KKB81152ABSEOB ABS Oil-rubbed bronze stainless steelKKB81152ABSATGB ABS Brushed nickel anodized aluminumKKB81152ABSAKGB ABS Brushed copper/bronze anod. alu.KKB81152ABSAMGB ABS Brushed brass anodized aluminumKKB81152PVCECS PVC Tileable covering support*KKB81152PVCE PVC Stainless steel 304 (1.4301 = V2A) KKB81152PVCEOB PVC Oil-rubbed bronze stainless steelKKB81152PVCATGB PVC Brushed nickel anodized aluminumKKB81152PVCAKGB PVC Brushed copper/bronze anod. alu.KKB81152PVCAMGB PVC Brushed brass anodized aluminum
Tray size Item No.
48" x 48" KK12272" x 72" KK18332" x 60" KK8115232" x 60" off-center drain KKB81152
Schluter®-KERDI-SHOWER-KIT
Includes DescriptionQuantity
48" x 48" 72" x 72" 32" x 60"
KERDI-SHOWER-ST Shower Tray 1 1 1KERDI-SHOWER-SC Shower Curb 48" x 6" x 4-1/2" 1 2 2KERDI 10 M Waterproofing membrane 3' 3" x 33' = 108 ft2 1KERDI 12 M Waterproofing membrane 3' 3" x 39' 4" = 128 ft2 1KERDI 20 M Waterproofing membrane 3' 3" x 65' 7" = 215 ft2 1KERDI-BAND Waterproofing strip 5" x 33' 1 2 1
1
2
3
4
* Patent pending
76 For more information, please call: 800-267-1923
S H O W E R S Y S T E M
1
2
3
4
A. Channel body with Schluter®-KERDI waterproofing collar
B. Channel support
C. No-hub coupling
A
B
C
Choose your bonding flange
• Formed stainless steel channel body with 2" no-hub outlet (coupling included)
• Foam channel support sets the drain flush with shower tray
• Integrated bonding flange with Schluter®-KERDI collar ensures a simple and secure connection to the bonded waterproofing assembly
1
KERDI-LINE components
Covering Support D: Frameless tileablesuitable for coverings of any thickness
Choose your grate assembly
• Lengths ranging from 20" to 48" nom.
• Two grate frames accommodate 1/8" to 1" -thick tiles
2
3/4" framefor coverings with thicknesses from 1/8" to 9/16"
1-3/16" framefor coverings with thicknesses from 1/2" to 1"
Grate A: Closed design
Grate B: Perforated
• Choose your sloped shower tray (please refer to page 86)
• Available for wall or intermediate drain placement in two sizes: 39" x 39" or 55" x 55"
• Schluter®-KERDI waterproofing membrane laminated to the surface
• Choose shower profiles (please refer to page 86-87)
• Elegant solutions for finishing area between shower base and first course of wall tile in applications incorporating KERDI-LINE
• The SHOWERPROFILE-S tapered profile matches the slope of the shower tray and eliminates angled cuts to simplify tile installation
• The SHOWERPROFILE-R two-part wall transition profile is adjusted to cover the exposed area where KERDI-LINE is installed adjacent to the wall
• Two brushed stainless steel design grate options: closed design or square perforations
• Frameless tileable covering support provides virtually invisible drainage; suitable for any thickness tile
There are multiple selections to be made for the KERDI-LINE. Start by selecting the appropriate flange length then proceed to grate selection accordingly, keeping in mind there are two frame heights with two grate options (A or B), and
a frameless option (D). - Please refer to page 85 for sizes and ordering information.
Schluter®-KERDI-LINE
4
3
77For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
Schluter®-KERDI-LINEThe Schluter®-KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage. The floor can be sloped on a single plane to KERDI-LINE, which enables the use of large-format tiles and creates interesting design opportunities.
Schluter®-KERDI-LINE consists of a formed stainless steel channel body and a grate assembly that can be seamlessly adjusted to the thickness of the ceramic tile or stone covering from 1/8" to 1". Grate assemblies are available in three designs: closed, perforated, or tile pan.
Schluter®-KERDI-LINE is listed by UPC®, CSA, and NSF.
Bonding flange - stainless steel
L = in.(inside dimension)
L1= in.(outside dimension)
Item No.
20 22 KLV60E5024 26 KLV60E6028 30 KLV60E7032 34 KLV60E8036 38 KLV60E9040 42 KLV60E10044 46 KLV60E11048 50 KLV60E120
Note: There are multiple selections to be made for this product. Start by selecting the appropriate flange length then proceed to grate selection accordingly, keeping in mind there are two frame heights with two grate options (A or B), and a frameless option (D).
4-23/32"
2-1/4"7/8" 7/8"
15/16"
= L (inside dimension)
= L 1 (outside dimension)
5-15/32"
2-1/4"7/8" 7/8"
15/16"
Intermediate placement
Wall placement
Grate assemblies
Length = in.
Item No. Item No.
Closed (A) Perforated (B)
Frameless Tileable (D)
Patent pending
For 1/8" to 9/16" -thick coverings
3/4" frame height
20 KLAR19EB50 KLB19EB50 KLDRE5024 KLAR19EB60 KLB19EB60 KLDRE6028 KLAR19EB70 KLB19EB70 KLDRE7032 KLAR19EB80 KLB19EB80 KLDRE8036 KLAR19EB90 KLB19EB90 KLDRE9040 KLAR19EB100 KLB19EB100 KLDRE10044 KLAR19EB110 KLB19EB110 KLDRE11048 KLAR19EB120 KLB19EB120 KLDRE120
For 1/2" to 1" -thick coverings
1-1/8" frame height
20 KLAR30EB50 KLB30EB5024 KLAR30EB60 KLB30EB6028 KLAR30EB70 KLB30EB7032 KLAR30EB80 KLB30EB8036 KLAR30EB90 KLB30EB9040 KLAR30EB100 KLB30EB10044 KLAR30EB110 KLB30EB11048 KLAR30EB120 KLB30EB120
2"
Frameless Tileable (D) Patent pending
= H
3/8"1-27/32"
2-29/32"
Closed (A)
= H
3/8"2-1/8"
2-29/32"
Perforated (B)
Bonding Flange
78 For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
SHOWERPROFILE-SA - Two-part tapered edging profile
H = tile thickness Item No. H1 = in. H2 = in.
L = 47-1/4" 3/16 SPSA50EB/120 1/4 1-3/16
L = 63" 3/16 SPSA50EB/160 1/4 1-1/2
L = 78-3/4"3/16 SPSA50EB/200 1/4 1-13/16
Schluter®-SHOWERPROFILE-SB - Two-part tapered edging profile
H = tile thickness Item No. H1 = in. H2 = in.
L = 47-1/4"3/8 SPSB100EB/120 3/8 1-11/321/2 SPSB125EB/120 3/8 1-11/32
L = 63" 3/8 SPSB100EB/160 3/8 1-21/321/2 SPSB125EB/160 3/8 1-21/32
L = 78-3/4"3/8 SPSB100EB/200 3/8 2 1/2 SPSB125EB/200 3/8 2
= H1
= L
2%= H2
H = 3/16" or
3/8"H = 1/2"
3/8"
KERDI-SHOWER-LS - Shower tray - wall drain placement
Item No. Dimensions End height
KSL1000S 39" x 39" 1-21/32"KSL1400S 55" x 55" 2"
KERDI-SHOWER-L - Shower tray - center drain placement
Item No. Dimensions End height
KSL1000 39" x 39" 1-1/4"KSL1400 55" x 55" 1-13/32"
Schluter®-KERDI-SHOWER-L/-LSThe KERDI-SHOWER-L/-LS are polystyrene sloped trays with integrated Schluter®-KERDI waterproofing. The KERDI-SHOWER-L allows for the installation of a center drain whereas the KERDI-SHOWER-LS accommodates the installation of the drain along the perimeter of the shower.
Schluter®-SHOWERPROFILE-SThe SHOWERPROFILE-S is a two-part profile with a tapered edge, designed to cover adjoining tile edges that become exposed as the shower floor slopes to accommodate drainage to the Schluter®-KERDI-LINE. The tapered profile features a visible surface of brushed stainless steel and a fleece fabric on the reverse for bonding with the tile adhesive. It is designed to be inserted into the U-shaped groove of the matching hard PVC support profile. The profile can be used for lateral transitions to the wall or the adjoining floor.
Schluter®-KERDI-SHOWER-LS Schluter®-KERDI-SHOWER-L
79For more information, please call: 800-267-1923
S H O W E R S Y S T E M
No minimum required. Please check your electronic catalog system for pricing.
Schluter®-KERDI-LINE-FCSchluter®-KERDI-LINE-FC is a stainless steel cover plate for use with the Schluter®-KERDI-LINE linear floor drain to create a seamless look in applications where multiple drains are installed end to end. KERDI-LINE-FC features a brushed finish, and is designed for use with either the solid or perforated grates with brushed stainless steel frame.
Schluter®-KERDI-LINE-FC Cover plate
Item No.
V/KLEB35
SHOWERPROFILE-R - Two-part wall transition profile
H = tile thickness Item No.
L = 39"29/32 - 1-3/8 SPRA23EB/1001-5/16 - 1-25/32 SPRA33EB/100L = 55"29/32 - 1-3/8 SPRA 23 EB/1401-5/16 - 1-25/32 SPRA 33 EB/140
Schluter®-SHOWERPROFILE-RThe Schluter®-SHOWERPROFILE-R is a two part wall transition profile made of brushed stainless steel for covering the exposed wall area where the floor slopes down to a perimeter linear drain. A fleece fabric is laminated on the reverse of the profile for bonding with the tile adhesive. The two-part design of Schluter-SHOWERPROFILE-R can be seamlessly adjusted to any height between 29/32" and 1-25/32" (available in two versions). The profile is available in lengths of 39" and 55" and can be cut to the desired length.
= H
25/32"
7/8" / 1-1/4"
H = variable
T O O L S
Schluter®-SNIPSSchluter®-SNIPS are specifically designed to cut PVC trim profiles.
Item No.
PSFReplacement blade
PS90/45EK
Schluter®-DITRA RollerDITRA roller is used to embed DITRA/-DITRA-XL in the bond coat during membrane installation. The lightweight DITRA-ROLLER features a 14-1/2" (37 cm) wide roller and a shelf for placing 50 to 75 lbs of weight (e.g., bag of thin-set mortar or grout, box of tiles, etc.). Between uses, it can be conveniently disassembled for transport and storage.
Schluter®-DITRA Roller
Item No.
DIRO
1-3/8''
80 For more information, please call: 800-472-4588
Schluter-Systems Tools 2-Year Limited Warranty
COVERAGE AND CONDITIONS: Subject to the conditions and limitations as stated hereinafter, Schluter-Systems* warrants that Schluter-Systems Tools (the “Products”)** will be free from manufacturing defects in materials and workmanship for a period of two (2) years from the date of purchase only when the Products have been used for their intended purpose in accordance with the Schluter-Systems Illustrated Price List. Abnormal use, including but not limited to, misuse, accident, modification, unrea-sonable use, abuse, neglect, lack of maintenance, or use after the product is significantly worn, is not covered by this warranty. Consumable Products or consumable parts of Products are warranted, at the time of sale, only against defects in workmanship or materials that prevent their use. Consumable products or parts are goods reasonably expected to be used up or damaged during normal use, including but not limited to trowels, cutting blades, and cutting wheels. This warranty does not cover normal wear and tear or defects revealed by normal wear and tear.
RESOLUTION: If the Products fail to meet this warranty, then then the owner’s exclusive remedy and the sole obligation of Schluter-Systems, at its election, shall be to a) repair or replace the failed Products or b) pay an amount not to exceed the original cost of the Products verified to be defective.
DISCLAIMER: THERE ARE NO WARRANTIES BEYOND THIS EXPRESSED WARRANTY AS STATED ABOVE. ALL OTHER WAR-RANTIES, REPRESENTATIONS OR CONDITIONS, EXPRESSED OR IMPLIED, ARE DISCLAIMED AND EXCLUDED, INCLUDING WARRANTIES, REPRESENTATIONS OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARISING BY STATUTE OR OTHERWISE BY LAW OR FROM A COURSE OF DEALING OR USAGE OF TRADE. SCHLUTER-SYS-TEMS EXCLUDES AND IN NO EVENT SHALL HAVE ANY LIABILITY FOR LOST PROFITS OR ANY OTHER INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, EXEMPLARY, OR CONSEQUENTIAL DAMAGES, ARISING OUT OF OR OTHERWISE CONNECTED TO FAILURE OF THE PRODUCTS, NOR MISUSE OF THE PRODUCTS, REGARDLESS OF ANY STRICT LIABILITY, ACTIVE OR PASSIVE NEGLIGENCE OF SCHLUTER-SYSTEMS, AND REGARDLESS OF THE LEGAL THEORY (CONTRACT OR TORT OR EXTRA-CONTRACTUAL OR OTHER), NOR FROM ACTS OF WAR, TERRORISM, FIRES, EXPLOSIONS, ACTS OF GOD, INTEN-TIONAL ACTS OF DESTRUCTION OR ANY LOSSES DUE TO CAUSES UNRELATED TO THE PRODUCT OR DELAYS, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS WARRANTY IS GIVEN IN LIEU OF ANY OTHER WARRANTY EXPRESSED OR IMPLIED. THE REMEDIES CONTAINED HEREIN ARE THE ONLY REMEDIES AVAILABLE FOR BREACH OF THIS WARRANTY. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, SOME STATES AND PROVINCES DO NOT ALLOW DISCLAIMERS OR OTHER RESTRICTIONS OF IMPLIED WARRANTIES SO SOME OF THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
TRANSFERRABILITY: This Limited Warranty extends ONLY to the original intended owner (defined as original purchaser of the tool – herein after referred to as “Owner”) and is not transferable or assignable, unless otherwise prohibited by specific state or provincial law.
MODIFICATIONS TO WARRANTY: No changes or modification of any terms or conditions of this warranty are allowed unless authorized by written agreement and signed by the Technical Director or an Officer of Schluter-Systems.
EFFECTIVE DATE: This warranty shall supersede and replace any and all prior oral or written warranties, agreements, or other such representations made by or on behalf of Schluter-Systems relative to the Products or the use of the Products and shall apply to any purchase occurring on or after January 1, 2013.
CLAIMS ON THIS LIMITED WARRANTY: To make a claim under this Limited Warranty, the owner must provide Schluter-Sys-tems with written notice within 30 days of any alleged defect in the Products covered by this Limited Warranty, together with date and proof of purchase of the Products, failing which this Limited Warranty shall be of no legal effect. Schluter-Systems reserves the right at its election and as a condition of this Limited Warranty to inspect the alleged failed and defective condition.
All U.S. Claims shall be sent to: All Canadian Claims shall be sent to:
Schluter Systems L.P. Schluter Systems (Canada), Inc.Attn: Warranty Claims Dept. Attn: Warranty Claims Dept.194 Pleasant Ridge Road 21100 ch. Ste-MariePlattsburgh, NY 12901-5841 Ste-Anne-de-Bellevue, QC H9X 3Y8
*For the purpose of this warranty Schluter Systems, L.P. shall provide the warranty for all products for end users located in the United States, and Schluter-Systems (Canada) Inc. shall provide the warranty for all products for end users located in Canada. This warranty is limited to sales of the products made in and intended for use in the United States and Canada.
**Schluter-Systems Tools (the “Products”): The products are defined to include all Schluter-Systems tools referred to in the Schluter-Systems Illustrated Price List.
81For information or to place an order, please call: 800-472-4588
2013 Warranty Program Summary
All Schluter-Systems products are covered under our warranty program. Products are warranted for the applicable term from the date of purchase only when the products are used and installed in accordance with the terms and conditions of the applicable Schluter-Systems technical literature and industry standard guidelines that are not in conflict with the technical literature.
There are three different categories of warranties as follows:
Systems
Systems are application based and include a variety of products that form an integrated system. Systems are defined by installation handbooks.
• Schluter®-DITRA and Schluter®-DITRA-XL uncoupling membranes• Schluter®-Shower System
Consolidated Products
Consolidated products are products with similar characteristics or functions that are grouped under a single warranty document. These product groups are defined by technical data sheets.
• Floor profiles• Wall and countertop profiles• Stair-nosing profiles• Movement joints and cove-shaped profiles• Balcony profiles and gutters• Schluter®-TROBA and Schluter®-TROBA-PLUS drainage mattings• Schluter®-BEKOTEC modular screed panels• Schluter®-KERDI-DRAIN and Schluter®-KERDI-LINE floor drains• Schluter®-KERDI and Schluter®-KERDI-DS waterproofing membranes
Individual Products
Individual products are those that do not fit into a current consolidated product group and therefore have a separate warranty docu-ment. These products are defined by technical data sheets.
• Schluter®-KERDI-BOARD building panels• Schluter®-DITRA-DRAIN thin-bed drainage membrane• Schluter®-KERDI-FIX adhesive/sealant• Tools
For complete warranty information, please see our website: www.schluter.com/warranty.aspx
All prior conditions of sale shall be deemed to be modified as hereinafter stated and the following conditions shall be deemed to supersede and control disputes or claims to goods.
1. Ownership of the PropertyOwnership of the products shall remain and vest with Schluter until full payment has been received with respect thereto.
2. DeliveryIf Schluter is prevented from carrying out the provisions hereof by reason of any acts of God, war, revolution, strike, riot, earthquake, delay by carrier, fuel shortage, embargo, lockout or other labour disturbance, the operations of statute of law, interference of civil or military authority or any other event beyond its control, interfering with the production or delivery of the products as herein contemplated, Schluter shall be exonerated from and shall not be liable for any loss or damage arising from any of the foregoing and shall be further excused from making deliveries to the extent of such interference and shall have, in addition to the foregoing and without prejudice thereto, the absolute right to cancel any purchase orders with respect to any of the products therein described or with respect to any part thereof without any liability of any nature whatsoever attaching to itself other than the obligation to reimburse and return any payments of monies made in advance for the products which shall not be delivered for the reasons hereinabove set forth. Any delivery not in dispute shall be paid for regardless of any other existing disputes between Schluter and the Buyer relating to other delivered or undelivered products.
3. Inspection and SampleThe Buyer shall have the right to inspect the products upon delivery of same. Failure by the Buyer to inspect the said products and specify in writing to Schluter any defective products shall constitute on the Buyer’s part an absolute and unconditional waiver of the Buyer’s right to reject the products and shall be deemed an acceptance by the Buyer of the products as to quality and/or quantity of same. Any samples of the products shown to the Buyer prior to placement of any order with Schluter are for the sole purpose and intent of exhibiting to the Buyer the type of products which may be the subject matter of an order by the Buyer. Such samples create no warranty on the part of Schluter, implied or otherwise, that the said products ultimately forming the subject matter of an order placed by the Buyer necessarily shall conform with the samples referred to above.
4. ClaimsAny claim for damage, short shipment, misdelivery or defects of the products must be specified in writing on the delivery slip and brought to the attention of Schluter at the time of delivery. If no claim is made by the Buyer at the time of receipt of the products, then the right to make such claim or the right to reject any or all of the products shall be waived by the Buyer. At its option, Schluter will either replace such products that are proven defective or allow credit for them.
5. InstallationSchluter shall in no way be responsible for any claims resulting from the installation or finishing of the products.
6. LiabilitySchluter is not liable and/or responsible toward any third party and/or Buyer, as the case may be, for any damage and/or loss of any nature or kind howsoever arising, resulting directly or indirectly from the use of the products in a manner not in conformity with the instructions accompanying same and in effect with respect thereto and/or resulting from the products being improperly used for which the products were not intended. Prior to any use of products, the user and/or Buyer has the prior obligation to verify the suitability of the products for their intended use and the Buyer shall assume all risks and responsibility with respect thereto.
Schluter’s responsibility and liability with respect to defective products and/or work attaching thereto shall be confined solely to the replacement and/or repair of same. In addition to the foregoing, Schluter shall alternatively have the right to reimburse the Buyer the purchase price paid with respect thereto rather than to replace and/or repair the defective products.
7. AcceptanceInstallation and/or use of the products by the Buyer shall constitute an irrevocable acceptance of the products. Failure to reject the products in the manner and within the time period stipulated in paragraphs 4 and 5 hereof shall be deemed to constitute an acceptance of the products.
8. CancellationOrders are not subject to cancellation or deferment of shipment unless Schluter is indemnified against the loss resulting therefrom. Schluter shall not be responsible for delays or non-performance caused by strikes, fires or other causes beyond its control, as the whole is stipulated in paragraph 3 hereof. Orders entered on Schluter’s order book cannot be cancelled or changed without Schluter’s prior written consent and then only on the terms which will indemnify Schluter against all loss. No cancellations will be accepted or allowed after the order has been shipped from our warehouse.
10. Modifications of ConditionsNo modifications of the conditions can be made without the prior written authorization from a representative of Schluter.
C O N D I T I O N S O F S A L E
To access your Lowe’s item number and pricing please check your electronic catalog or go to lowes.com.
Model # RO80SP
5536
51
11
/201
3
© 2
013
Sch
lute
r S
yste
ms
L.P
.
All
prod
uct
nam
es a
re r
egis
tere
d tr
adem
arks
of S
chlu
ter
Sys
tem
s K
.G. a
nd li
cens
ed t
o S
chlu
ter
Sys
tem
s L.
P.
Schluter Systems L.P. • 194 Pleasant Ridge Road, Plattsburgh, NY 12901-5841 • Tel.: 800-267-1923 • Fax: 800-477-9783
www.schluter.com
Lowe’s Special Order Catalog
Installation Systems for Ceramic & Stone Tile
Effective January 10, 2014