low slope product data guide - buildsite...quality you can trust… from north america’s largest...
TRANSCRIPT
-
Quality You Can Trust… From North America’s Largest Roofing Manufacturer!™
1-800-ROOF-411 www.gaf.com
Low Slope Product Data Guide
APPLICATION & SPECIFICATIONS MANUAL
1/12
-
AsphAltic MeMbrAnes pageRUBEROID® ENERGYCAP™ MOP FR 4RUBEROID® MOP FR 5RUBEROID® DUAL FR 6RUBEROID® DUAL SMOOTH 7RUBEROID® MOP PLUS SMOOTH 8RUBEROID® MOP SMOOTH 1.5 9RUBEROID® MOP 170 FR 10RUBEROID® MOP GRANULE 11RUBEROID® 30FR 12RUBEROID® ENERGYCAP™ SBS 30 FR 13RUBEROID® 30 14RUBEROID® 20 15RUBEROID® ENERGYCAP™ SBS HEAT-WELD™ PLUS FR 16RUBEROID® SBS HEAT-WELD™ PLUS FR 17RUBEROID® SBS HEAT-WELD™ PLUS 18RUBEROID® SBS HEAT-WELD™ 170 FR 19RUBEROID® SBS HEAT-WELD™ GRANULE 20RUBEROID® SBS HEAT-WELD™ SMOOTH 21RUBEROID® SBS HEAT-WELD™ 25 22WORKHORSE™ ROOFMATCH™ SBS GRANULAR 23ULTRACLAD® SBS FOIL-FACED MEMBRANE 24RUBEROID® SA FR CAP SHEET 25RUBEROID® SA CAP SHEET 26RUBEROID® SA BASE/PLY SHEET 27LIBERTY™ SBS SELF-ADHERING CAP SHEET 28LIBERTY™ SBS SELF-ADHERING BASE/PLY SHEET 29LIBERTY™ MA MECHANICALLY ATTACHED BASE SHEET 30WEATHER WATCH® XT 31STORMSAFE™ ANCHOR SHEET 32WORKHORSE™ ROOFMATCH® APP GRANULAR 33RUBEROID® TORCH FR 34RUBEROID® ENERGYCAP™ TORCH PLUS FR 35RUBEROID® ENERGYCAP™ TORCH GRANULE FR 36RUBEROID® TORCH GRANULE 37RUBEROID® TORCH SMOOTH 38GAFGLAS® ENERGYCAP™ BUR MINERAL SURFACED CAP SHEET 39GAFGLAS® MINERAL SURFACED CAP SHEET 40GAFGLAS® FLEXPLY™ 6 41GAFGLAS® PLY 4 42GAFGLAS® STRATAVENT® ELIMINATOR™ PERFORATED BASE SHEET 43GAFGLAS® STRATAVENT® ELIMINATOR™ NAILABLE BASE SHEET 44GAFGLAS® #80 ULTIMA™ BASE SHEET 45GAFGLAS® #75 BASE SHEET 46insulAtion And FAstening systeMs pageENERGYGUARD™ ROOF INSULATION BOARD, 20 & 25 PSI 48ENERGYGUARD™ TAPERED POLYISO FOAM ROOF INSULATION, 20 & 25 50ENERGYGUARD™ COMPOSITE BOARD ROOF INSULATION 52ENERGYGUARD™ PERLITE ROOF INSULATION 54ENERGYGUARD™ PERLITE TAPERED ROOF INSULATION 56ENERGYGUARD™ PERLITE CANT STRIP 58ENERGYGUARD™ PERLITE TAPERED EDGE STRIP 60
-
insulAtion And FAstening systeMs (continued) pageENERGYGUARD™ PERLITE RECOVER BOARD 62DENS-DECK® ROOF BOARD 63DENS-DECK® PRIME™ ROOF BOARD 65DRILL-TEC™ ASAP® 3P ASSEMBLED SCREW AND 3” LOCKING PLASTIC PLATE 67DRILL-TEC™ HEAVY DUTY ASAP® 2S ASSEMBLED SCREW AND 2” STEEL BARBED PLATE 68DRILL-TEC™ EXTRA HEAVY DUTY ASAP® ASSEMBLED SCREW & 2 3/8” STEEL BARBED PLATE 69DRILL-TEC™ ASAP® 3S ASSEMBLED SCREW AND 3” STEEL PLATE 70DRILL-TEC™ CD-10 FASTENER 71DRILL-TEC™ BASE SHEET FASTENER E (1.2 in.) 72DRILL-TEC™ DL 1.7 BASE SHEET FASTENER 73DRILL-TEC™ BASE SHEET FASTENER (1.7in) 74DRILL-TEC™ HEAVY DUTY #14 ROOFING FASTENER 75DRILL-TEC™ LITE-DECK FASTENER 76DRILL-TEC™ MASONRY ANCHOR 77DRILL-TEC™ STEEL AND PLASTIC PLATES 78DRILL-TEC™ STANDARD #12 ROOFING FASTENER 79DRILL-TEC™ SUPER EXTRA HEAVY DUTY #21 ROOFING FASTENER 80DRILL-TEC™ EXTRA HEAVY DUTY #15 ROOFING FASTENER 81DRILL-TEC™ LOCKING IMPACT NAIL 82DRILL-TEC™ RHINOBOND® FASTENING PLATE 3” TPO COATED GALVALUME® STEEL 84DRILL-TEC™ ACCUTRAC® AND ACCUSEAM PLATES 85DRILL-TEC™ POLYMER GYPTEC™ 86LRF M ADHESIVE 87FlAshing Accessories pageTOPCOAT® MATRIX™ MAJORSEAL™ LIQUID FLASHING 90LEXSUCO® REINFORCED FLASHING RF 92LEXSUCO® METAL EDGE FLASHING 93M-WELD® ONE WAY M-VENT 94M-WELD® STANDARD M-DRAIN 96M-WELD® STANDARD M-VENT 98M-WELD® ADJUSTABLE M-VENT 100 M-WELD® M-CURB SYSTEM 102METALASTIC® SMF STRAIGHT METAL FLANGE EXPANSION JOINT COVER 104METALASTIC® CMF CURB MOUNT FLANGE EXPANSION JOINT COVER 106METALASTIC® CTW CURB TO WALL EXPANSION JOINT COVER 108METALASTIC® LP LOW PROFILE EXPANSION JOINT COVER 109TOPCOAT® MATRIX™ MAJORBOND™ MODIFIED BITUMEN ADHESIVE 112TOPCOAT® MATRIX™ MAJORBOND™ FLASHING CEMENT 114TOPCOAT® MATRIX™ 102 SBS MEMBRANE ADHESIVE 116TOPCOAT® MATRIX™ 103 COLD PROCESS ADHESIVE 118TOPCOAT® MATRIX™ 201 PREMIUM SBS FLASHING CEMENT 120TOPCOAT® MATRIX™ 202 SBS FLASHING CEMENT 122TOPCOAT® MATRIX™ 203 PLASTIC ROOF CEMENT 124TOPCOAT® MATRIX™ 204 WET/DRY ROOF CEMENT 126TOPCOAT® MATRIX™ 305 FIBERED ASPHALT EMULSION 128TOPCOAT® MATRIX™ 306 NON-FIBERED ASPHALT EMULSION 128TOPCOAT® MATRIX™ 307 PREMIUM ASPHALT PRIMER 130TOPCOAT® MATRIX™ 322 ELASTOMERIC ROOF COATING 132
-
product pageRUBEROID® ENERGYCAP™ MOP FR 4RUBEROID® MOP FR 5RUBEROID® DUAL FR 6RUBEROID® DUAL SMOOTH 7RUBEROID® MOP PLUS SMOOTH 8RUBEROID® MOP SMOOTH 1.5 9RUBEROID® MOP 170 FR 10RUBEROID® MOP GRANULE 11RUBEROID® 30FR 12RUBEROID® ENERGYCAP™ SBS 30 FR 13RUBEROID® 30 14RUBEROID® 20 15RUBEROID® ENERGYCAP™ SBS HEAT-WELD™ PLUS FR 16RUBEROID® SBS HEAT-WELD™ PLUS FR 17RUBEROID® SBS HEAT-WELD™ PLUS 18RUBEROID® SBS HEAT-WELD™ 170 FR 19RUBEROID® SBS HEAT-WELD™ GRANULE 20RUBEROID® SBS HEAT-WELD™ SMOOTH 21RUBEROID® SBS HEAT-WELD™ 25 22WORKHORSE™ ROOFMATCH™ SBS GRANULAR 23ULTRACLAD® SBS FOIL-FACED MEMBRANE 24RUBEROID® SA FR CAP SHEET 25RUBEROID® SA CAP SHEET 26RUBEROID® SA BASE/PLY SHEET 27LIBERTY™ SBS SELF-ADHERING CAP SHEET 28LIBERTY™ SBS SELF-ADHERING BASE/PLY SHEET 29LIBERTY™ MA MECHANICALLY ATTACHED BASE SHEET 30WEATHER WATCH® XT 31STORMSAFE™ ANCHOR SHEET 32WORKHORSE™ ROOFMATCH® APP GRANULAR 33RUBEROID® TORCH FR 34RUBEROID® ENERGYCAP™ TORCH PLUS FR 35RUBEROID® ENERGYCAP™ TORCH GRANULE FR 36RUBEROID® TORCH GRANULE 37RUBEROID® TORCH SMOOTH 38GAFGLAS® ENERGYCAP™ BUR MINERAL SURFACED CAP SHEET 39GAFGLAS® MINERAL SURFACED CAP SHEET 40GAFGLAS® FLEXPLY™ 6 41GAFGLAS® PLY 4 42GAFGLAS® STRATAVENT® ELIMINATOR™ PERFORATED BASE SHEET 43GAFGLAS® STRATAVENT® ELIMINATOR™ NAILABLE BASE SHEET 44GAFGLAS® #80 ULTIMA™ BASE SHEET 45GAFGLAS® #75 BASE SHEET 46
Asphaltic Membranes
-
©2012 GAF 1/12 4 www.gaf.com • 1-800-ROOF-411
description RUBEROID® EnergyCap™ MOP FR membrane is a premium, heavy duty, fire-retardant modified bitumen membrane with a factory applied layer of TOPCOAT® EnergyCote™ elastomeric coating. Its core is a strong, resilient non-woven polyester mat that is coated with a fire-retardant SBS polymer- modified asphalt and surfaced with mineral granules. uses RUBEROID® EnergyCap™ MOP FR is designed for new roofing and reroofing applications where long-term roof system performance is specified.Advantages • System guarantees are
available for up to 20 years. • Resilient—RUBEROID®
EnergyCap™ MOP FR’s heavy weight polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
• Durable—specially formulated modified asphalt gives RUBEROID® EnergyCap™ MOP FR lasting performance.
Advantages (Continued) • RUBEROID® EnergyCap™ MOP
FR is backed by GAF, a company with over 100 years in the roofing business.
• RUBEROID® EnergyCap™ MOP FR is available in highly reflective brilliant white only.
product specifications (nominal)Roll Size 1 square
(107.52 gross sq.ft.) (9.99m2)
Roll Length 32.56’ (9.92m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 103.8 lbs (47.04kg)ProductThickness 0.155” (3.9mm)Initial Emissivity* .83Initial Reflectivity* .73
SRI (Solar Reflective Index) 89
This product meets or exceeds the following ASTM D6164, Type II, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 100
Elongation @ 0°F (min), % ASTM D5147 20
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 70
Dimensional Stability, (max) % ASTM D5147 1
Applicable standardsMeets ASTM D6164, Type II, Grade G
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274 Pending
UL/ULc Classified
Title 24 Compliant
RUBEROID®
ENERGYCAP™MOP FR
Note: The emittance and reflectance values published are those required for Title 24 compliance as listed by CRRC. For certification or other reflectance and emittance code requirements, different calculations may be used resulting in different values. All EnergyCap products meet LEED requirements. Please contact technical services at 1-800-766-3411 for assistance and submittal information.
-
©2012 GAF 1/12 5 www.gaf.com • 1-800-ROOF-411
description RUBEROID® MOP FR membrane is a premium, heavy duty, fire-retarding modified bitumen membrane manu-factured to stringent GAF specifica-tions. Its core is a strong, resilient non-woven polyester mat that is coated with an inherently fire retar-dant SBS polymer-modified asphalt and surfaced with mineral granules. uses RUBEROID® MOP FR is designed for new roofing and reroofing applications where long-term roof system performance is specified.Advantages • System guarantees are available
for up to 20 years. • No coating required for Class A
ratings from UL and FMRC. • Lightweight—installed premium roof
designs weigh less than 3 pounds per square foot.
• Resilient—RUBEROID® MOP FR’s heavy weight polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
• Durable—specially formulated modified asphalt gives RUBEROID® MOP FR lasting performance.
Advantages (Continued) • RUBEROID® MOP FR is backed
by GAF, a company with over 100 years in the roofing business.
• Available with black or white granules.
RUBEROID®MOP FR
product specifications (nominal)Roll Size 1 square
(107.52 gross sq.ft.) (9.99m2)
Roll Length 32.56’ (9.92m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 103.7 lbs (47.04kg)
ProductThickness 0.155” (3.9mm)
This product meets or exceeds the following ASTM D6164, Type II, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 100
Elongation @ 0°F (min), % ASTM D5147 20
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 70
Dimensional Stability, (max) % ASTM D5147 1
Applicable standardsMeets ASTM D6164, Type II, Grade G
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
Texas Department of Insurance
UL/ULc Classified
City of Los Angeles Report #2527
-
©2012 GAF 1/12 6 www.gaf.com • 1-800-ROOF-411
description RUBEROID® DUAL FR membrane is a premium, heavy duty, fire- retarding modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, premium fiberglass/polyester/ composite mat that is coated with an inherently fire retardant SBS polymer-modified asphalt and surfaced with mineral granules. uses RUBEROID® DUAL FR is designed for new roofing and reroofing applications where long-term roof system performance is specified. Advantages • System guarantees are available
for up to 20 years. • No coating required for Class A
ratings from UL and FMRC. • Lightweight—installed premium
roof designs weigh less than 3 pounds per square foot.
• Resilient—RUBEROID® DUAL FR’s heavyweight composite mat and core allow it to resist splits and tears due to its strength, pliability and elongation characteristics.
Advantages (Continued) • Durable—specially
formulated modified asphalt gives RUBEROID® DUAL FR lasting performance.
• RUBEROID® DUAL FR is backed by GAF, a company with over 100 years in the roofing business.
• Available with black or white granules.
RUBEROID®DUAL FR
product specifications (nominal)Roll Size 1 square
(106.9 gross sq.ft.) (9.93m2)
Roll Length 32.56’ (9.92m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 104.9 lbs (47.58kg)
ProductThickness 0.164” (4.17mm)
This product meets or exceeds the following ASTM D6162, Type II, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 125
Elongation @ 0°F (min), % ASTM D5147 2
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 90
Dimensional Stability, (max) % ASTM D5147 0.5
Applicable standardsMeets ASTM D6162, Type II, Grade G
FM Approved
Meets CGSB-37-GP-56M
Miami-Dade County Product Control Approval
State of Florida Product Approval
UL/ULc Classified
Texas Department of Insurance Report RC-49
-
©2012 GAF 1/12 7 www.gaf.com • 1-800-ROOF-411
description RUBEROID® DUAL SMOOTH membrane is a premium, heavy duty, modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, premium fiberglass / polyester / composite mat that is coated with an SBS polymer-modified asphalt and is smooth-surfaced. NOTE: Smooth-surfaced mop applied installations must be protected with surfacing.uses RUBEROID® DUAL SMOOTH is designed for new roofing and reroofing applications, as well as the construction of flashings. RUBEROID® DUAL SMOOTH is also an ideal product for repairs of built-up roofing membranes or modified bitumen systems. Advantages • Guarantees are available for up
to 20 years. • No coating required for Class
A ratings from UL. • Lightweight—installed premium
roof designs weigh less than 3 pounds per square foot.
• Resilient—RUBEROID® DUAL SMOOTH’s heavyweight composite mat and core allow it to resist splits and tears due to its strength, pliability and elongation characteristics.
Advantages (Continued) • Durable—specially formulated
modified asphalt gives RUBEROID® DUAL SMOOTH lasting performance.
• RUBEROID® DUAL SMOOTH is backed by GAF, a company with over 100 years in the roofing business.
RUBEROID®DUAL SMOOTH
product specifications (nominal)Roll Size 1 square
(106.9 gross sq.ft.) (9.93m2)
Roll Length 32.56’ (9.92m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 92.5 lbs (41.96kg)
ProductThickness 0.138” (3.51mm)
This product meets or exceeds the following ASTM D6162, Type II, Grade S, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 125
Elongation @ 0°F (min), % ASTM D5147 2
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 90
Dimensional Stability, (max) % ASTM D5147 0.5
Applicable standardsMeets ASTM D6162, Type II, Grade S
UL/ULc Classified
FM Approved
-
©2012 GAF 1/12 8 www.gaf.com • 1-800-ROOF-411
description RUBEROID® MOP PLUS SMOOTH membrane is a premium, heavy duty, modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, resilient non-woven polyester mat that is coated with flexible, SBS polymer-modified asphalt and is smooth surfaced. Smooth surfaced mop applied installations must be protected with surfacing. uses RUBEROID® MOP PLUS SMOOTH is designed for new roofing and reroofing applications as well as the construction of flashings. RUBEROID® MOP PLUS SMOOTH is also an ideal product for repairs of built-up roofing membranes or other modified bitumen systems.Advantages •���Guarantees are available for
up to 20 years• Lightweight—installed roof
designs weigh less than 2 pounds per square foot.
• Durable —specially formulated modified asphalt gives RUBEROID® MOP PLUS SMOOTH lasting performance.
Advantages (Continued)• Resilient—RUBEROID® MOP PLUS
SMOOTH’s heavy weight polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
• RUBEROID MOP PLUS SMOOTH membrane is backed by GAF, a company with over 100 years in the roofing business.
RUBEROID®MOP PLUS SMOOTH
product specifications (nominal)Roll Size 1 square
(107.5 gross sq.ft.) (9.9m2)
Roll Length 32.56’ (9.9m)
Roll Width 39.625” (1006.5mm)
Approx.Roll Weight 80 lbs (36.29kg)
ProductThickness 0.120” (3.05mm)
This product meets or exceeds the following ASTM D6164, Type II, Grade S, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 100
Elongation @ 0°F (min), % ASTM D5147 20
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 70
Dimensional Stability, (max) % ASTM D5147 1
Applicable standardsMeets ASTM D6164, Type II, Grade S
FM Approved
ICC ESR#1274 Pending
UL/ULc Listed
-
©2012 GAF 1/12 9 www.gaf.com • 1-800-ROOF-411
description RUBEROID® MOP SMOOTH 1.5 membrane is a tough, resilient modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, resilient, non-woven polyester mat that is coated with flexible, SBS polymer-modified asphalt and is smooth surfaced. Smooth surfaced mop applied installations must be protected with surfacing. uses RUBEROID® MOP SMOOTH 1.5 is designed for new roofing and reroofing applications as well as the construction of flashings. RUBEROID® MOP SMOOTH 1.5 is also an ideal product for repairs of built-up roofing membranes or other modified bitumen systems.Advantages •�Typical system guarantees available for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
• Lightweight—installed roof designs weigh less than 2 pounds per square foot.
• Durable —specially formulated modified asphalt gives RUBEROID® MOP SMOOTH 1.5 lasting performance.
Advantages (Continued)• Resilient — RUBEROID® MOP
SMOOTH 1.5’s polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
• RUBEROID® MOP SMOOTH 1.5 membrane is backed by GAF, a company with over 100 years in the roofing business.
RUBEROID®MOP SMOOTH 1.5
product specifications (nominal)Roll Size 1.5 square
(163.5 gross sq.ft.) (15.9m2)
Roll Length 49.5’ (15.09m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 89.5 lbs (40.6kg)
ProductThickness 0.090” (2.29mm)
This product meets or exceeds the following ASTM D6164, Type I, Grade S, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (min), % ASTM D5147 20
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 55
Dimensional Stability, (max) % ASTM D5147 1
Applicable standardsMeets ASTM D6164, Type I, Grade S
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
Texas Department of Insurance
UL/ULc Listed
-
©2012 GAF 1/12 10 www.gaf.com • 1-800-ROOF-411
RUBEROID®MOP 170 FR
This product meets or exceeds the following ASTM D6164, Type I, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (min), % ASTM D5147 20
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 55
Dimensional Stability, (max) % ASTM D5147 1
description RUBEROID® MOP 170 FR membrane is a fire-retarding modified bitumen membrane manufactured to strin-gent GAF specifications. Its core is a strong, resilient non-woven polyester mat that is coated with an inherently fire retardant SBS polymer-modified asphalt and surfaced with mineral granules. uses RUBEROID® MOP 170 FR is designed for new roofing and reroofing applications where long-term roof system performance is specified. Advantages • Typical system guarantees
available for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
• No coating required for Class A ratings from UL and FMRC.
• Lightweight—installed roof designs weigh less than 2 pounds per square foot.
• Resilient—RUBEROID® MOP 170 FR’s special polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
• Durable—specially formulated modified asphalt gives RUBEROID® MOP 170 FR lasting performance.
Advantages (Continued) • RUBEROID® MOP 170 FR
is backed by GAF, a company with over 100 years in the roofing business.
• Available with black or white granules.
product specifications (nominal)Roll Size 1 square
(108.3 gross sq.ft.) (10.07m2)
Roll Length 32.8’ (10.0m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 102.5 lbs (46.49kg)
ProductThickness 0.155” (3.94mm)
Applicable standardsMeets ASTM D6164, Type I, Grade G
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
Texas Department of Insurance
UL/ULc Classified
City of Los Angeles RR 25271
-
©2012 GAF 1/12 11 www.gaf.com • 1-800-ROOF-411
description RUBEROID® MOP GRANULE membrane is a tough, resilient modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, resilient, non-woven polyester mat that is coated flexible, SBS polymer-modified asphalt and is surfaced with mineral granules. uses RUBEROID® MOP GRANULE is designed for new roofing and reroofing applications as well as the construction of flashings. RUBEROID® MOP GRANULE is also an ideal product for repairs of built-up roofing membranes or other modified bitumen systems.Advantages • Typical system guarantees
available for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
• Lightweight—installed roof designs weigh less than 2 pounds per square foot.
• Durable —specially formulated modified asphalt gives RUBEROID® MOP GRANULE lasting performance.
• Resilient —RUBEROID® MOP GRANULE’S polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
Advantages (Continued) • RUBEROID® MOP GRANULE
membrane is backed by GAF, a company with over 100 years in the roofing business.
• Available in granulated black, white, burnt sienna blend, cedar blend, slate blend, weathered wood blend.
RUBEROID®MOP GRANULE
product specifications (nominal)Roll Size 1 square
(107.5 gross sq.ft.) (9.99m2)
Roll Length 32.56’ (9.92m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 90 lbs (41kg)
ProductThickness 0.140” (3.56mm)
This product meets or exceeds the following ASTM D6164, Type I, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (min), % ASTM D5147 20
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 55
Dimensional Stability, (max) % ASTM D5147 1
Applicable standardsMeets ASTM D6164, Type I, Grade G
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
Texas Department of Insurance
UL/ULc Classified
City of Los Angeles RR 25271
-
©2012 GAF 1/12 12 www.gaf.com • 1-800-ROOF-411
description RUBEROID® 30FR membrane is a fire-retarding modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong resilient, non-woven glass mat that is coated with an inherently fire retardant SBS polymer modified asphalt and surfaced with mineral granules.uses RUBEROID® 30FR is designed for new roofing including GAF’s 20/30FR system and recover applications as well as in the construction of flashings. RUBEROID® 30FR is also an ideal product for repairs of built-up roofing membranes or modified bitumen systems. Advantages •��Typical system guarantees
available for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
•��Durable—RUBEROID® 30FR combines the strength of fiberglass reinforcement with the elongation characteristic of SBS modified asphalt.
• Lightweight—installed roof designs weigh less than 3 pounds per square foot.
Advantages (Continued) • RUBEROID® 30FR membrane
is backed by GAF, a company with over 100 years in the roofing business.
• No coating required for Class A rating from UL.
• Available with black or white granules.
RUBEROID®30FR
product specifications (nominal)Roll Size 1 square
(110.5 gross sq.ft.) (10.27m2)
Roll Length 33.7’ (10.27m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 95.9 lbs (43.50kg)
ProductThickness 0.140” (3.56mm)
This product meets or exceeds the following ASTM D6163, Type I, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (min), % ASTM D5147 1
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 35
Dimensional Stability, (max) % ASTM D5147 0.5
Applicable standardsMeets ASTM D6163, Type I, Grade G
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
Texas Department of Insurance
UL/ULc Classified
-
©2012 GAF 1/12 13 www.gaf.com • 1-800-ROOF-411
description RUBEROID® EnergyCap™ SBS 30 FR modified bitumen membrane is a fire-retarding modified bitumen membrane with a factory applied layer of TOPCOAT® EnergyCote™ elastomeric coating. EnergyCap™ SBS 30 FR is manufactured to stringent GAF specifications. Its core is a strong resilient, non-woven glass mat that is coated with fire retardant SBS polymer modified asphalt and surfaced with extra fine mineral granules and EnergyCote™ elastomeric coating.uses RUBEROID® EnergyCap™ SBS 30 FR modified bitumen membrane is designed for new roofing including new roofing and recover applications. Advantages • Typical system guarantees available
for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
• Durable—RUBEROID® EnergyCap™ SBS 30 FR modified bitumen membrane combines the strength of fiberglass reinforcement with the elongation characteristic of SBS Modified asphalt.
• Lightweight—installed roof designs weigh less than 3 pounds per sq. ft.
• RUBEROID® EnergyCap™ SBS 30 FR modified bitumen membrane is backed by GAF, a company with over 100 years in the roofing business.
Advantages (Continued) • RUBEROID® EnergyCap™ SBS
30 FR modified bitumen membrane is available in highly reflective brilliant white only.
product specifications (nominal)
Energy Cap SBS 30 FR (glass mat)
Roll Size1 square(110.5 gross sq.ft.) (10.27m2)
Roll Length 33.7’ (10.27m)
Roll Width 39.375” (1.0m)Approx.Roll Weight 98.4 lbs (44.63kg)ProductThickness 0.140” (3.56mm)InitialEmissivity 0.84InitialReflectivity 0.80
SRI (Solar Reflective Index) 99
This product meets or exceeds the following ASTM D6163, Type I, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (nom.), % ASTM D5147 1
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 35
Dimensional Stability, (max) % ASTM D5147 0.5
Applicable standardsMeets ASTM D6163, Type I, Grade G
ASTM C1549, ASTM E903
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
State of Florida Approved
Ul/ULc Classified
TItle 24 Compliant
CRRC Listed
ENERGY STAR® Listed
Miami Dade County Product Control Approval
RUBEROID®
ENERGYCAP™SBS 30 FR
Note: The emittance and reflectance values published are those required for Title 24 compliance as listed by CRRC. For certification or other reflectance and emittance code requirements, different calculations may be used resulting in different values. All EnergyCap products meet LEED requirements. Please contact technical services at 1-800-766-3411 for assistance and submittal information.
-
©2012 GAF 1/12 14 www.gaf.com • 1-800-ROOF-411
description RUBEROID® 30 membrane is a tough, resilient modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong resilient, non-woven glass mat that is coated with flexible, SBS polymer modified asphalt and surfaced with mineral granules.uses RUBEROID® 30 is designed for new roofing including GAF’s 20/30 system and recover applications as well as in the construction of flashings. RUBEROID® 30 is also an ideal product for repairs of built-up roofing membranes or modified bitumen systems. Advantages • Typical system guarantees
available for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
• Durable—RUBEROID® 30 combines the strength of fiberglass reinforcement with the elongation characteristic of SBS Modified asphalt.
• Lightweight—installed roof designs weigh less than 3 pounds per square foot.
Advantages (Continued)
• RUBEROID® 30 membrane is backed by GAF, a company with over 100 years in the roofing business.
• No coating required—available with black or white granules.
RUBEROID®30
product specifications (nominal)Roll Size 1 square
(110.5 gross sq.ft.) (10.27m2)
Roll Length 33.7’ (10.3m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 95.9 lbs (43.50kg)
ProductThickness 0.140” (3.56mm)
This product meets or exceeds the following ASTM D6163, Type I, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (min), % ASTM D5147 1
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 35
Dimensional Stability, (max) % ASTM D5147 0.5
Applicable standardsMeets ASTM D6163, Type I, Grade G
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
Texas Department of Insurance
UL/ULc Classified
-
©2012 GAF 1/12 15 www.gaf.com • 1-800-ROOF-411
description RUBEROID® 20 membrane is a tough, resilient modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, resilient non-woven glass mat that is coated with flexible, SBS polymer-modified asphalt.uses RUBEROID® 20 is designed for new roofing and recover applications as well as in the construction of flashings. RUBEROID® 20 is an ideal base or interply roofing membrane in modified bitumen systems including GAF CompositeRoof™ and 20/30 systems.Advantages • System guarantees are available
for up to 20 years•��Lightweight—installed�roof�
designs weigh less than three pounds per square foot.
•��Durable—combines�the�strength�of fiberglass reinforcement with the elongation characteristics of SBS modified asphalt.
Advantages (Continued) • RUBEROID® 20 membrane is
backed by GAF, a company with over 100 years in the roofing business.
•�Available�as�a�smooth�surface.
RUBEROID®20
product specifications (nominal)Roll Size 1.5 square
(165.1 gross sq.ft.) (15.3m2)
Roll Length 50.3’ (15.34m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 89.0 lbs (40.37kg)
ProductThickness 0.085” (2.1mm)
This product meets or exceeds the following ASTM D6163, Type I, Grade S, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (min), % ASTM D5147 1
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 35
Dimensional Stability, (max) % ASTM D5147 0.5
Applicable standardsMeets ASTM D6163, Type I, Grade S
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
Texas Department of Insurance
UL/ULc Classified
-
©2012 GAF 1/12 16 www.gaf.com • 1-800-ROOF-411
description RUBEROID® EnergyCap™ SBS Heat-Weld™ Plus FR is a modified bitumen membrane with a factory applied premium heavy duty fire retarding modified bitumen membrane and a factory applied layer of TOPCOAT® EnergyCote™ elastomeric coating. EnergyCap™ SBS Heat-Weld™ Plus FR is manufactured to stringent GAF specifi-cations. Its core is a strong, heavy-weight, resilient non-woven polyester mat that is coated with fire resistant SBS polymer modified asphalt and surfaced with extra fine mineral granules and EnergyCote™ elastomeric coating.uses RUBEROID® EnergyCap™ SBS Heat-Weld™ Plus FR modified bitumen membrane is designed for new roofing and reroofing applications where long term roof system performance is specified.Advantages • System guarantees are available
for up to 20 years. • Cost effective—the installed cost
of RUBEROID® EnergyCap™ SBS Heat-Weld™ Plus FR is much less than installing a reflective coating on top of a standard white granule membrane.
• Lightweight—installed premium roof systems weigh less than 3 pounds per sq. ft.
• Resilient—RUBEROID® EnergyCap™ SBS Heat-Weld™ Plus FR’s heavyweight polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics
• Durable—specially formulated modified asphalt gives RUBEROID® EnergyCap™ SBS Heat-Weld™ Plus FR lasting performance
Advantages (Continued) • RUBEROID® EnergyCap™ SBS
Heat-Weld™ Plus FR modified bitumen membrane is backed by GAF, a company with over 100 years in the roofing business.
• RUBEROID® EnergyCap™ SBS Heat-Weld™ Plus FR modified bitumen membrane is available in highly reflective brilliant white only
product specifications (nominal)
Roll Size 1 square(108.1 gross sq.ft.) (10.04m2)
Roll Length 32.75’ (9.98m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 108 lbs (49kg)
ProductThickness 0.165” (4.19mm)Initial Emissivity* 0.82
Initial Reflectivity* 0.75
SRI (Solar Reflective Index) 91
This product meets or exceeds the following ASTM D6164, Types I & II, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F, (lbf/in) ASTM D5147 100 min
Elongation @ 0°F, (%) ASTM D5147 20 min
Low Temperature Flexibility, (°F) ASTM D5147 0°F max (-18°C)
Tear Strength, (lbf) ASTM D5147 70 min
Dimensional Stability, (%) ASTM D5147 1.0 max
Applicable standardsMeets ASTM D6164, Types I & II, Grade G
ASTM E903, ASTM E408TItle 24 Compliant, ENERGY STAR® Qualified (expected)UL/ULc Listed
RUBEROID®
ENERGYCAP™SBS HEAT-WELD™ PLUS FR
Note: The emittance and reflectance values published are those required for Title 24 compliance as listed by CRRC.For certification or other reflectance and emittance code requirements, different calculations may be used resulting in different values. All EnergyCap products meet LEED requirements. Please contact technical services at 1-800-766-3411 for assistance and submittal information.
-
©2012 GAF 1/12 17 www.gaf.com • 1-800-ROOF-411
description RUBEROID® SBS HEAT-WELD™ PLUS FR is a premium, heavy duty fire-retarding SBS modified bitumen membrane that can be installed without the use of hot asphalt. Its core is a strong, resilient, non-woven polyester mat that is coated with an inherently fire retardant polymer modified asphalt and surfaced with mineral granules.uses RUBEROID® SBS HEAT-WELD™ PLUS FR is designed for new roofing and recovering applications as well as the construction of flashings. RUBEROID® SBS HEAT-WELD™ PLUS FR is also an ideal product for repairs of built-up roofing membranes or other modified bitumen systems. Advantages • System guarantees are available
for up to 20 years. • Lightweight— installed roof
designs weigh less than 2 pounds per square foot.
• Durable — specially formulated modified asphalt gives RUBEROID® SBS HEAT-WELD™ PLUS FR lasting performance.
• Specially formulated poly burn-off film allows for easy installation
• Heat welding allows for kettle free operation.
Advantages (Continued) • Resilient—RUBEROID® SBS
HEAT-WELD™ PLUS FR premium• polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
• RUBEROID® SBS HEAT-WELD™ PLUS FR membrane is backed by GAF, a company with over 100 years in the roofing business.
• No coatings required for Class A ratings from UL and FMRC.
• Available with granular surface: black, white.
RUBEROID®SBS HEAT-WELD™ PLUS FR
product specifications (nominal)Roll Size 1 square
(107.7 gross sq.ft.) (10.0m2)
Roll Length 32.6’ (9.9m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 105 lbs (47.6kg)
ProductThickness 0.165” (4.19mm)
This product meets or exceeds the following ASTM D6164, Types I & II, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 100
Elongation @ 0°F (min), % ASTM D5147 20
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 70
Dimensional Stability, (max) % ASTM D5147 1
Applicable standardsMeets ASTM D6164, Types I & II, Grade G
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
UL/ULc Listed
-
©2012 GAF 1/12 18 www.gaf.com • 1-800-ROOF-411
description RUBEROID® SBS HEAT-WELD™ PLUS is a premium SBS modified bitumen membrane that can be installed without the use of hot asphalt. Its core is a strong, resilient, non-woven polyester mat that is coated with a polymer- modified asphalt and surfaced with mineral granules.uses RUBEROID® SBS HEAT-WELD™ PLUS is designed for new roof-ing and recovering applica-tions as well as the construc-tion of flashings. RUBEROID SBS HEAT WELD PLUS is also an ideal product for repairs of built-up roofing membranes or other modified bitumen systems. Advantages • System guarantees are available
for up to 20 years.• Lightweight— installed roof
designs weigh less than 2 pounds per square foot.
• Durable — specially formulated modified asphalt gives RUBEROID® SBS HEAT-WELD™ PLUS lasting performance.
• Specially formulated poly burn-off film allows for easy installation.
• Heat welding allows for kettle free operation.
Advantages (Continued) • Resilient—RUBEROID® SBS
HEAT-WELD™ PLUS premium polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
• RUBEROID® SBS HEAT-WELD™ PLUS membrane is backed by GAF, a company with over 100 years in the roofing business.
• Available with granular surface: black, white.
RUBEROID®SBS HEAT-WELD™ PLUS
product specifications (nominal)Roll Size 1 square
(107.7 gross sq.ft.) (10.0m2)
Roll Length 32.6’ (9.9m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 105 lbs (47.6kg)
ProductThickness 0.165” (4.2mm)
This product meets or exceeds the following ASTM D6164, Types I & II, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 100
Elongation @ 0°F (min), % ASTM D5147 20
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 70
Dimensional Stability, (max) % ASTM D5147 1
Applicable standardsMeets ASTM D6164, Types I & II, Grade G
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
UL/ULc Listed
-
©2012 GAF 1/12 19 www.gaf.com • 1-800-ROOF-411
description RUBEROID® SBS HEAT-WELD™ 170 FR is a tough, fire-retarding SBS modified bitumen membrane that can be installed without the use of hot asphalt. Its core is a strong, resilient, non-woven polyester mat that is coated with an inherently fire retardant polymer modified asphalt and surfaced with mineral granules. uses RUBEROID® SBS HEAT-WELD™ 170 FR is designed for new roofing and recovering applications as well as the construction of flashings. RUBEROID® SBS HEAT-WELD™ 170 FR is also an ideal product for repairs of built-up roofing membranes or other modified bitumen systems. Advantages • Typical system guarantees
available for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
• Lightweight— installed roof designs weigh less than 2 pounds per square foot.
• Durable — specially formulated modified asphalt gives RUBEROID® SBS HEAT-WELD™ 170 FR lasting performance.
• Specially formulated poly burn-off film allows for easy installation.
•��Heat welding allows for kettle free operation.
• Resilient—RUBEROID® SBS HEAT-WELD™ 170 FR polyester mat core
Advantages (Continued)• allows it to resist splits and tears
due to its pliability and elongation characteristics.
•��RUBEROID® SBS HEAT-WELD™ 170 FR membrane is backed by GAF, a company with over 100 years in the roofing business.
•��No coatings required for Class A ratings from UL and FMRC.
• Available with granular surface: black, white.
RUBEROID®SBS HEAT-WELD™ 170 FR
product specifications (nominal)Roll Size 1 square
(107.7 gross sq.ft.) (10.0m2)
Roll Length 32.6’ (9.9m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 104 lbs (47.2kg)
ProductThickness 0.161” (4.1mm)
This product meets or exceeds the following ASTM D6164, Type I, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (min), % ASTM D5147 20
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 55
Dimensional Stability, (max)% ASTM D5147 1
Applicable standards
-
©2012 GAF 1/12 20 www.gaf.com • 1-800-ROOF-411
description RUBEROID® SBS HEAT-WELD™ GRANULE is a tough, resilient SBS modified bitumen membrane that can be installed without the use of hot asphalt. Its core is a strong, resilient, non-woven polyester mat that is coated with an SBS polymer-modified asphalt and surfaced with mineral granules.uses RUBEROID® SBS HEAT-WELD™ GRANULE is designed for new roofing and recovering applica-tions as well as the construction of flashings. RUBEROID® SBS HEAT-WELD™ GRANULE is also an ideal product for repairs of built-up roofing membranes or other modified bitumen systems. Advantages • Typical system guarantees
available for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
• Lightweight— installed roof designs weigh less than 2 pounds per square foot.
• Durable — specially formulated modified asphalt gives RUBEROID® SBS HEAT-WELD™ GRANULE lasting performance.
• Specially formulated poly burn-off film allows for easy installation.
• Heat welding allows for kettle free operation.
• Resilient—RUBEROID® SBS HEAT-WELD™ GRANULE polyester mat core allows it to resist splits and
Advantages (Continued)• tears due to its pliability and
elongation characteristics.• RUBEROID® SBS HEAT-WELD™
membrane is backed by GAF, a company with over 100 years in the roofing business.
• Available with granular surface: black, white.
RUBEROID®SBS HEAT-WELD™ GRANULE
product specifications (nominal)Roll Size 1 square
(107.7 gross sq.ft.) (10.0m2)
Roll Length 32.6’ (9.9m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 104.4 lbs (47.4kg)
ProductThickness 0.164” (4.17mm)
This product meets or exceeds the following ASTM D6164, Type I, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (min), % ASTM D5147 20
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 55
Dimensional Stability, (max) % ASTM D5147 1
Applicable standardsMeets ASTM D6164, Type I, Grade G
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
UL/ULc Listed
-
©2012 GAF 1/12 21 www.gaf.com • 1-800-ROOF-411
description RUBEROID® SBS HEAT-WELD™ SMOOTH membrane is a tough, resilient modified bitumen mem-brane manufactured to stringent GAF specifications. Its core is a strong, resilient, non-woven polyester mat that is coated with flexible, polymer-modified asphalt and is smooth surfaced. Smooth surfaced SBS HEAT-WELD installations must be protected with surfacing.uses RUBEROID® SBS HEAT-WELD™ SMOOTH is designed for new roofing and recovering applica-tions as well as the construction of flashings. RUBEROID® SBS HEAT-WELD™ SMOOTH is also an ideal product for repairs of built-up roofing membranes or other modified bitumen systems.Advantages • System guarantees are available
for up to 20 years.• Cost effective–the installed cost
is less than most single-ply systems on the market today.
• Light weight–installed roof designs weigh less than 2 pounds per square foot.
Advantages (Continued) • Durable–specially formulated
modified asphalt gives lasting performance.
• Resilient polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
• RUBEROID® SBS HEAT-WELD™ SMOOTH membrane is backed by GAF, a company with over 100 years in the roofing business.
RUBEROID®SBS HEAT-WELD™ SMOOTH
product specifications (nominal)Roll Size 1 square
(107.7 gross sq.ft.) (10.0m2)
Roll Length 32.6’ (9.9m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 104 lbs (47.2kg)
ProductThickness 0.165” (4.2mm)
This product meets or exceeds the following ASTM D6164, Type I, Grade S, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (min), % ASTM D5147 20
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 55
Dimensional Stability, (max)% ASTM D5147 1
Applicable standardsMeets ASTM D6164, Type I, Grade S
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
UL/ULc Listed
-
©2012 GAF 1/12 22 www.gaf.com • 1-800-ROOF-411
description RUBEROID® SBS HEAT-WELD™ 25 membrane is a tough, resilient modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, resilient non-woven glass mat that is coated with flexible, polymer modified asphalt. uses RUBEROID® SBS HEAT-WELD™ 25 is designed for new roofing and recovering applications as well as in the construction of flashings. RUBEROID® SBS HEAT-WELD™ 25 is an ideal base or interply roofing membrane in modified bitumen systems.Advantages • System guarantees are available
for up to 20 years. • Cost effective–the installed cost
of SBS HEAT-WELD systems is less than most single-ply systems on the market today.
• Lightweight–installed roof designs weigh less than two pounds per square foot.
• Durable–combines the strength of fiberglass reinforcement with the elongation characteristics of SBS modified asphalt.
Advantages (Continued) • RUBEROID® SBS HEAT-WELD™
25 membrane is backed by GAF, a company with over 100 years in the roofing business.
• Available as a smooth surface.
RUBEROID®SBS HEAT-WELD™ 25
product specifications (nominal)Roll Size 1.5 squares
(163.75 gross sq.ft.) (15.2m2)
Roll Length 50.0’ (15.2m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 105 lbs (47.6kg)
This product meets or exceeds the following ASTM D6163, Type I, Grade S, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (min), % ASTM D5147 1
Low Temperature Flexibility (max), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 35
Dimensional Stability, (max) % ASTM D5147 0.5
Applicable standardsMeets ASTM D6163, Type I, Grade S
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
UL/ULc Listed
-
©2012 GAF 1/12 23 www.gaf.com • 1-800-ROOF-411
description ROOFMatch™ SBS Granular membranes are tough, resilient modified bitumen membranes manufactured to stringent specifications. The core is a strong, resilient, non-woven polyester mat that is coated with flexible, SBS polymer-modified asphalt and is surfaced with mineral granules. uses ROOFMatch™ SBS Granular is designed for new roofing and reroofing applications as well as the construction of flashings. ROOFMatch™ SBS Granular is also an ideal product for repairs of built-up roofing membranes or other modified bitumen systems. Advantages • Typical system guarantees
available for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
• Lightweight—installed roof designs weigh less than 2 pounds per square foot.
• Durable—specially formulated modified asphalt for lasting performance.
Advantages (Continued)
• Resilient— ROOFMatch™ SBS Granular’s polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
• ROOFMatch™ SBS Granular is backed by GAF, a company with over 100 years in the roofing business.
• Available in five granular colors; hickory, shakewood, slate, weathered wood and tan.
WORKHORSE™
ROOFMATCH™SBS GRANULAR
product specifications (nominal)Roll Size 1 square
(107.5 gross sq.ft.) (9.99m2)
Roll Length 32.56’ (9.92m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 90 lbs (40.82kg)
ProductThickness 0.140” (3.56mm)
This product meets or exceeds the following ASTM D6164, Type I, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (nom.), % ASTM D5147 20
Low Temperature Flexibility (max.), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 55
Dimensional Stability, (max) % ASTM D5147 1
See GAF Applications and Specification Manual or UL Directory for specific approvals
Applicable standardsMeets ASTM D6164, Type I, Grade G
FM Approved
Miami-Dade County Product Control Approval
UL/ULc Classified
-
©2012 GAF 1/12 24 www.gaf.com • 1-800-ROOF-411
description ULTRACLAD® SBS Foil-Faced Membrane is a premium, fire retarding bitumen membrane manufactured to stringent GAF specifications. ULTRACLAD® SBS Foil-Faced Membrane is manufactured using a high tensile woven fiberglass scrim coated with an SBS modified asphalt, which provides excellent cold temperature flexibility and elongation properties. The membrane is covered with a protective foil facing with small built-in control channels.uses ULTRACLAD® SBS Foil-Faced Membrane is designed for new roofing and reroofing applications where long-term flashing and roof system performance is specified. ULTRACLAD® SBS Foil-Faced Membrane can be applied using heat welding methods.Advantages • Guarantees are available for
up to 20 years.
Advantages (continued)• SBS Modifier provides flexibility
for easy installation.• Available in aluminum, copper*,
stainless steel* and a variety of architectural colors* (*special order).
• ULTRACLAD® SBS Foil-Faced Membrane is used as a premium modified cap sheet in SBS modified or BUR system flashing.
• Embossed metal surface provides pleasing aesthetics and energy saving reflectivity.
ULTRACLAD® SBS FOIL-FACED MEMBRANE
product specifications (nominal)Roll Size 1 square
(110.6 gross sq.ft.) (10.27m2)
Roll Length 33.4’ (10.1m)
Roll Width 39.75” (1.0m)
Approx.Roll Weight 101 lbs (45.8kg)ProductThickness 0.145” (3.7mm)
Applicable standardsUL approved for use in the construction of Class A, B, or C roof systems
ASTM D6298
-
©2012 GAF 1/12 25 www.gaf.com • 1-800-ROOF-411
description RUBEROID® SA FR Cap Sheet is a durable, self-adhering modified bitumen membrane designed and manufactured to meet industry and code requirements. The product is designed for use as a waterproofing membrane and is reinforced with a polyester mat, which is coated with a polymer-modified asphalt. RUBEROID® SA FR Cap Sheet is a granule- surfaced roofing membrane designed to be used with RUBEROID® SA Base/Ply or Liberty™ MA Mechanically Attached Base Sheet to provide long-lasting protection for the low-slope areas of your property. System guaran-tees are available for up to 20 years. RUBEROID® SA Systems are applied without torches, open flames, hot asphalt, or messy solvent-based adhesives and are suitable for primed plywood decks and many other substrates. Technical and Sales information can be obtained through the GAF Contractor Services Hotline, (800) 766-3411.
Application RUBEROID® SA FR Cap Sheet is applied to approved substrates using its unique self-adhering formulation.
RUBEROID®SA FR CAP SHEET
product specifications (nominal)Roll Size 1 square
(111.6 gross sq.ft.) (10.4m2)
Roll Length 34.0’ (10.4m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 99 lbs (44kg)
ProductThickness 0.157” (4mm)
This product meets or exceeds the following ASTM D6164, Type I, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (nom.), % ASTM D5147 20
Low Temperature Flexibility (max.), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 55
Dimensional Stability, (max) % ASTM D5147 1
Applicable standardsMeets Performance Requirements of ASTM D6164, Type I, ASTM D1970
ICC Pending
UL/ULc Listed
FM Approved
Data reported based on available independent and in-house resources. GAF reserves the right to change or modify, at its discretion, and without prior notice, any of the information, requirements, specifications or policiescontained in this document.
-
©2012 GAF 1/12 26 www.gaf.com • 1-800-ROOF-411
description RUBEROID® SA Cap Sheet is a durable, self-adhering modified bitumen membrane designed and manufactured to meet industry and code requirements. The product is designed for use as a waterproofing membrane and is reinforced with a polyester mat, which is coated with a polymer-modified asphalt. RUBEROID® SA Cap Sheet is a granule-surfaced roofing membrane designed to be used with RUBEROID® SA Base/Ply or Liberty™ MA Mechanically Attached Base Sheet to provide long-lasting protection for the low-slope areas of your property. System guarantees are available for up to 20 years. RUBEROID® SA Systems are applied without torches, open flames, hot asphalt, or messy solvent-based adhesives and are suitable for primed plywood decks and many other substrates. Technical and Sales information can be obtained through the GAF Contractor Services Hotline, (800) 766-3411.
Application RUBEROID® SA Cap Sheet is applied to approved substrates using its unique self-adhering formulation.
RUBEROID®SA CAP SHEET
product specifications (nominal)Roll Size 1 square
(111.6 gross sq.ft.) (10.4m2)
Roll Length 34.0’ (10.4m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 97 lbs (44kg)
ProductThickness 0.157” (4mm)
This product meets or exceeds the following ASTM D6164, Type I, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (nom.), % ASTM D5147 20
Low Temperature Flexibility (max.), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 55
Dimensional Stability, (max) % ASTM D5147 1
Applicable standards
Meets Performance Requirements of ASTM D6164, Type I, ASTM D1970
ICC Pending
UL/ULc Listed
FM Approved
Data reported based on available independent and in-house resources. GAF reserves the right to change or modify, at its discretion, and without prior notice, any of the information, requirements, specifications or policiescontained in this document.
-
©2012 GAF 1/12 27 www.gaf.com • 1-800-ROOF-411
description RUBEROID® SA Base/Ply is a Self-Adhering Base/Ply Sheet. It is a durable, modified bitumen membrane designed and manufactured to meet industry and code requirements. The product is designed for use as a waterproofing membrane and is reinforced with a glass mat, which is coated with a polymer-modified asphalt. RUBEROID® SA Base/Ply Sheet is a self-adhering roofing membrane designed for use with RUBEROID® SA Cap Sheet or RUBEROID® SA Cap FR Sheet to provide long-lasting protection for the low-slope areas of your property. System guarantees are available for up to 20 years. RUBEROID® SA Systems are applied without torches, open flames, hot asphalt, or messy solvent-based adhesives and are suitable for primed plywood decks and many other substrates. Technical and Sales information
description (Continued) can be obtained through the GAF Contractor Services Hotline, (800) 766-3411. Application RUBEROID® SA Base/Ply Sheet is applied using its unique self-adhering formulation.
RUBEROID®SA BASE/PLY SHEET
product specifications (nominal)Roll Size 2 squares
(216.6 gross sq.ft.) (20.1m2)
Roll Length 66’ (20.1m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 82 lbs (37.2kg)
ProductThickness 0.068” (1.73mm)
This product meets or exceeds the following ASTM D6163, Type I, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (nom.), % ASTM D5147 1
Low Temperature Flexibility (max.), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 35
Dimensional Stability, (max) % ASTM D5147 0.5
Applicable standards
Meets ASTM D6163, Type I
ICC Pending
UL/ULc Listed
FM Approved
Data reported based on available independent and in-house resources. GAF reserves the right to change or modify, at its discretion, and without prior notice, any of the information, requirements, specifications or policiescontained in this document.
-
©2012 GAF 1/12 28 www.gaf.com • 1-800-ROOF-411
description Liberty™ SBS Self-Adhering Cap Sheet is a durable, modified bitu-men membrane designed and manufactured to meet industry and code requirements. The product is designed for use as a waterproof-ing membrane and is reinforced with a polyester mat, which is coated with a polymer-modified asphalt. Liberty™ SBS Self-Adhering Cap Sheet is a granule-surfaced roofing membrane designed to be used with Liberty™ SBS Self-Adhering Base/Ply or Liberty™ MA Mechanically Attached Base Sheet to provide long-lasting pro-tection for the low-slope areas of your property. System guarantees are available for up to 20 years. Liberty™ Systems are applied without torches, open flames, hot asphalt, or messy solvent-based adhesives and are suitable for primed plywood decks and many other substrates. Technical and Sales information can be obtained through the GAF Contractor Services Hotline, (800) 766-3411.
Application Liberty™ SBS Self-Adhering Cap Sheet is applied to approved substrates using its unique self-adhering formulation.
LIBERTY™SBS SELF-ADHERING CAP SHEET
product specifications (nominal)Roll Size 1 square
(111.6 gross sq.ft.) (10.4m2)
Roll Length 34.0’ (10.4m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 96.4 lbs (43.7kg)
ProductThickness 0.157” (4mm)
This product meets or exceeds the following ASTM D6164, Type I, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (nom.), % ASTM D5147 20
Low Temperature Flexibility (max.), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 55
Dimensional Stability, (max) % ASTM D5147 1
Data reported based on available independent and in-house resources. GAF reserves the right to change or modify, at its discretion, and without prior notice, any of the information, requirements, specifications or policies contained in this document.
Applicable standardsMeets ASTM D6164, Type I
FBC
FM Approved
Meets CGSB-37-GP-56M
ICC Pending
Miami-Dade County Product Control Approval
State of Florida Product Approval
Texas Department of Insurance
UL/ULc Listed
-
©2012 GAF 1/12 29 www.gaf.com • 1-800-ROOF-411
description Liberty™ SBS Self-Adhering Base/Ply Sheet is a durable, modified bitumen membrane designed and manufactured to meet industry and code requirements. The product is designed for use as a water-proofing membrane and is reinforced with a glass mat, which is coated with a polymer-modified asphalt. Liberty™ SBS Self-Adhering Base/Ply Sheet is a self-adhering roofing membrane designed for use with Liberty™ SBS Self-Adhering Cap Sheet or Liberty™ SBS Self-Adhering Cap FR Sheet to provide long-lasting protection for the low-slope areas of your property. System guarantees are available for up to 20 years. Liberty™ Systems are applied without torches, open flames, hot asphalt, or messy solvent-based adhesives and are suitable for primed plywood decks and many other substrates.
Technical and Sales information can be obtained through the GAF Contractor Services Hotline, (800) 766-3411. Application Liberty™ SBS Self-Adhering Base/Ply Sheet is applied using its unique self-adhering formulation.
LIBERTY™SBS SELF-ADHERING BASE/PLY SHEET
product specifications (nominal)Roll Size 2 squares
(216.6 gross sq.ft.) (20.1m2)
Roll Length 66’ (20.1m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 82 lbs (37.2kg)
ProductThickness 0.07” (1.73mm)
This product meets or exceeds the following ASTM D6163, Type I, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (nom.), % ASTM D5147 1
Low Temperature Flexibility (max.), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 35
Dimensional Stability, (max) % ASTM D5147 0.5
Data reported based on available independent and in-house resources. GAF reserves the right to change or modify, at its discretion, and without prior notice, any of the information, requirements, specifications or policies contained in this document.
Applicable standardsMeets ASTM D6163, Type I
FM Approved
ICC Pending
Miami-Dade County Product Control Approval
UL/ULc Listed
-
©2012 GAF 1/12 30 www.gaf.com • 1-800-ROOF-411
description Liberty™ MA Mechanically Attached Base Sheet is a durable, modified bitumen membrane designed and manufactured to meet industry and code requirements. The product is designed for use as a base mem-brane for self-adhered roof systems and is reinforced with mat, which is coated with a polymer-modified asphalt. Liberty™ MA Mechanically Attached Base Sheet is approved with a proprietary film surface that assures a good bond for self-adhered membranes. System guarantees are available for up to 20 years. Liberty™ Systems are applied without torches, open flames, hot asphalt, or messy solvent-based adhesives and are suitable for primed for many substrates. Technical and Sales information can be obtained through the GAF Contractor Services Hotline, (800) 766-3411.
Application Liberty™ MA Mechanically Attached Base Sheet should be applied to a plywood deck or other nailable surfaces and mechanically fastened using Drill•Tec™ Screws according to applicable specifications.
product specifications (nominal)Roll Size 2 squares
(216.6 gross sq.ft.) (20.1m2)
Roll Length 66’ (20.1m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 82 lbs (37.2kg)
ProductThickness 0.068” (1.73mm)
Applicable standardsMeets ASTM D6163, Type I
FM Approved
ICC Pending
Miami-Dade County Product Control Approval
Ul/ULc Listed
LIBERTY™ MA MECHANICALLY ATTACHED BASE SHEET
This product meets or exceeds the following ASTM D6163, Type I, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 70
Elongation @ 0°F (nom.), % ASTM D5147 1
Low Temperature Flexibility (max.), °F ASTM D5147 0
Tear Strength (min), lbf ASTM D5147 35
Dimensional Stability, (max) % ASTM D5147 0.5
Data reported based on available independent and in-house resources. GAF reserves the right to change or modify, at its discretion, and without prior notice, any of the information, requirements, specifications or policies contained in this document.
-
©2012 GAF 1/12 31 www.gaf.com • 1-800-ROOF-411
description Weather Watch® XT is an SBS modified self-adhering leak barrier that serves dual purpose as a low slope self-adhering base sheet for use with SBS heat-weld and APP membranes.
description The sheet is designed to meet industry and code requirements. Weather Watch® XT is fiberglass reinforced for dimensional stability and surfaced with a high tack asphaltic compound that provides an excellent welding surface for membrane attachment. The self-adhering compound is compatible with isocyanurate insulation. Weather Watch® XT should be covered with roofing membrane the same day it is installed. Staged construction is not recommended. For additional information on acceptable substrates, codes, and approvals, contact technical services at 1-800-766-3411.
Advantages •��Self�adhering�compound�forms�
enhanced bond to the substrate with the application of the heat welded membrane
•��Added�tack�surface�melts� during application of the mem-brane forming a superior bond
•��Meets�all�the�physical� requirements of a traditional base sheet
WEATHER WATCH® XT
product specifications (nominal)Roll Size 2 square
(200 gross sq.ft.) (18.6m2)
Roll Length 66.7’ (20.3m)
Roll Width 36” (0.9m)
Approx.Roll Weight 60 lbs (27.2kg)
ProductThickness 0.053” (1.32mm)
Applicable standardsMeets ASTM D4601, Type II
Meets ASTM D1970
ICC Evaluation Reports Pending
UL/ULc Listed
-
©2012 GAF 1/12 32 www.gaf.com • 1-800-ROOF-411
description StormSafe™ Anchor Sheet for self-adhered membranes is a tough, non-breathable synthetic anchor sheet designed and manufactured to meet industry and code requirements for self-adhered low slope roofing applications.It is a polypropylene woven fabric coated on both sides with polypropylene. StormSafe Anchor Sheet is designed for use as an anchor sheet for Liberty™ (Modified Bitumen) and Freedom™ TPO self-adhered roof systems.StormSafe Anchor Sheet’s woven fabric creates a tough, durable reinforcement and its polypro-pylene coating makes it suitable for many applications. StormSafe Anchor Sheet is alkaline resistant, making it suitable for use over lightweight insulating concrete systems. The tough woven fabric makes it extremely tear resistant. In addition, the polypropylene coating ensures a good bond with both the butyl adhesive of Freedom™ membranes and the SBS modified adhesive of Liberty™ SA Base/Ply and Liberty Cap membranes. uses StormSafe Anchor Sheet should be applied with the beige color on top (weather side) and white color coating towards the deck side. Suitable substrates include: plywood, OSB, acceptable
uses (Continued) EnergyGuard™ Insulations, and lightweight insulating concrete. The product is designed to be installed mechanically over approved roofing substrates using acceptable fasteners that include galvanized nails with 1-inch�integral�heads�or�Drill•Tec™ fasteners and plates in accordance with applicable specifications. Prior to installing any self-adhering membrane, StormSafe Anchor Sheet must be clean and dry. Use care walking on the sheet when it is wet as it may be slippery. Advantages •��System guarantees are available
for up to 20 years. •��Lightweight:�Adds�less�than�
1.3 lbs per sq to the system•��Durable:�Woven�fabric�provides�
superior tear strength and excellent dimensional stability
STORMSAFE™ANCHOR SHEET
product specifications (nominal)Roll Size 24 squares
(2400 gross sq.ft.) (222.97m2)
Roll Length 600’ (182.9m)
Roll Width 48” (1.2m)
Approx.Roll Weight 67.9 lbs (30.8 kg)
Applicable standardsSlip Sheet for Roofing SystemsAS TO EXTERNAL FIRE EXPOSURE
State of Florida Product Approval
See GAF Applications and SpecificationManual or UL Directory for specific approval
-
©2012 GAF 1/12 33 www.gaf.com • 1-800-ROOF-411
description ROOFMatch™ APP Granular mem-branes are tough, resilient modified bitumen membranes manufactured to stringent specifications. The core is a strong, resilient, non-woven polyester mat that is coated with weather-resistant, APP polymer modified asphalt. uses ROOFMatch™ APP Granular is designed for new roofing and reroofing applications as well as flashings. ROOFMatch™ APP Granular is also an ideal product for repairs of built-up roofing membranes or other modified bitumen systems.Advantages • Typical system guarantees
available for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
• Cost effective—the installed cost of ROOFMatch™ APP Granular is less than most single-ply systems on the market today.
• Lightweight—installed roof designs weigh less than 2 pounds per square foot.
• Resilient— ROOFMatch™ APP Granular’s polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
Advantages (Continued) • Durable—specially formulated
modified asphalt for lasting performance.
• ROOFMatch™ APP Granular is backed by GAF, a company with over 100 years in the roofing business.
• Available in five granular colors; hickory, shakewood, slate, weathered wood and tan.
WORKHORSE™
ROOFMATCH®APP GRANULAR
product specifications (nominal)Roll Size 1 square
(106.5 gross sq.ft.) (9.8m2)
Roll Length 32.25’ (9.8m)
Roll Width 39.375” (1.0m)Approx.Roll Weight 102 lbs (46kg)ProductThickness 0.157” (4mm)
This product meets or exceeds the following ASTM D6222, Type I, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 60
Elongation @ 0°F (nom.), % ASTM D5147 10
Low Temperature Flexibility (max.), °F ASTM D5147 32
Tear Strength (min), lbf ASTM D5147 70
Dimensional Stability, (max) % ASTM D5147 1
See GAF Application and Specifications Manual or UL Directory for specific approvals
Applicable standardsMeets ASTM D6222, Type I, Grade G
FM Approved
HUD Material Release #1216A
ICC Pending
Miami-Dade County Product Control Approval
Texas Department of Insurance
UL/ULc Listed
-
©2012 GAF 1/12 34 www.gaf.com • 1-800-ROOF-411
description RUBEROID® TORCH FR membrane is a premium, fire-retarding modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, heavyweight, resilient non-woven polyester mat that is coated with an inherently fire-retardant APP polymer modified asphalt and sur-faced with mineral granules. uses RUBEROID TORCH FR is designed for new roofing and reroofing applications where long-term roof system performance is specified. Advantages • System guarantees are available
for up to 20 years.• No coating required for Class
A rating from UL and FMRC.• Cost effective—the installed
cost of RUBEROID TORCH FR is less than most single-ply systems on the market today.
• Lightweight—instaIIed premium roof designs weigh less than 3 pounds per square foot.
• Resilient—RUBEROID TORCH FR’s heavyweight polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
• Durable—specially formulated modified asphalt gives RUBEROID TORCH FR lasting performance.
Advantages (Continued)• Wind uplift resistance—selected
roofing assemblies with RUBEROID TORCH FR meet FMRC Class 1-180 when installed over concrete decks.
• RUBEROID TORCH FR membrane is backed by GAF, a company with over 100 years in the roofing business.
• Available with black or white granules.
RUBEROID®TORCH FR
product specifications (nominal)Roll Size 1 square
(106.7 gross sq.ft.) (9.8m2)
Roll Length 32.3’ (9.8m)
Roll Width 39.625” (1.0m)Approx.Roll Weight 102 lbs (46.3kg)ProductThickness 0.177” (4.5mm)
This product meets or exceeds the following ASTM D6222, Type II, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 90
Elongation @ 0°F (min), % ASTM D5147 15
Low Temperature Flexibility (max), °F ASTM D5147 32
Tear Strength (min), lbf ASTM D5147 80
Dimensional Stability, (max) % ASTM D5147 0.5
Applicable standardsMeets ASTM D6222, Type II, Grade G
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
Texas Department of Insurance
UL/ULc Listed
-
©2012 GAF 1/12 35 www.gaf.com • 1-800-ROOF-411
description RUBEROID® EnergyCap™ Torch Plus FR membrane is a premium, fire-retarding modified bitumen membrane with a factory applied layer of TOPCOAT® EnergyCote™ elastomeric coating. RUBEROID® EnergyCap™ Torch Plus FR is manufactured to stringent GAF specifications. Its core is a strong, resilient non-woven polyester mat that is coated with fire-retardant APP polymer modified asphalt and surfaced with extra fine mineral granules and EnergyCote™ elastomeric coating. uses RUBEROID® EnergyCap™ Torch Plus FR is designed for new roofing and reroofing applications where long-term roof system performance is specified.Advantages •��System�guarantees�are�available�for
up to 20 years.• Cost effective—the installed cost of
RUBEROID® EnergyCap™ Torch Plus FR is much less than installing a reflective coating on top of a standard white granule membrane.
• Lightweight—instaIIed premium roof systems weigh less than 3 pounds per square foot.
• Resilient—RUBEROID® EnergyCap™ Torch Plus FR’s polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
•��Durable—specially formulated modified asphalt gives RUBEROID® EnergyCap™ Torch Plus FR lasting performance.
• RUBEROID® EnergyCap™ Torch Plus FR membrane is backed by GAF, a company with over 100 years in the roofing business.
Advantages (Continued) • RUBEROID® EnergyCap™ Torch Plus
FR is available in high reflective brilliant white only.
product specifications (nominal)
Roll Size 1 square(106.7 gross sq.ft.) (9.9m2)
Roll Length 32.4’ (10.3m)
Roll Width 39.5” (1.0m)
Approx.Roll Weight 106 lbs (48.1kg)
ProductThickness 0.160” (4.06mm)
InitialEmissivity 0.84InitialReflectivity 0.80
SRI (Solar Reflectivity Index) 99
This product meets or exceeds the following ASTM D6222, Type II, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 90
Elongation @ 0°F (min), % ASTM D5147 15
Low Temperature Flexibility (max), °F ASTM D5147 32
Tear Strength (min), lbf ASTM D5147 80
Dimensional Stability, (max) % ASTM D5147 0.5
Applicable standardsMeets ASTM D6222, Type II, Grade G
ASTM C1549, ASTM E903, ASTM E408
FM Approved
Meets CGSB-37-GP-56M
HUD Material Release #1216A
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
Texas Department Of Insurance
UL/ULc Listed
CRRC Listed
Title 24 Compliant
ENERGY STAR® Listed
RUBEROID®
ENERGYCAP™TORCH PLUS FR
-
©2012 GAF 1/12 36 www.gaf.com • 1-800-ROOF-411
description RUBEROID® EnergyCap™ Torch Granule FR membrane is fire-retarding modified bitumen membrane with a factory applied layer of TOPCOAT® EnergyCote™ elastomeric coating. EnergyCap™ EnergyCap™ Torch Granule FR is manufactured to stringent GAF specifica-tions. Its core is a strong, resilient non-woven polyester mat that is coated with fire-retardant APP polymer modified asphalt and surfaced with extra fine mineral granules and EnergyCote™ elastomeric coating. uses RUBEROID® EnergyCap™ Torch Granule FR is designed for new roofing and reroofing applications where long-term roof system performance is specified. Advantages • Typical system guarantees available
for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
• Cost effective—the installed cost of RUBEROID® EnergyCap™ Torch Granule FR is much less than installing a reflective coating on top of a standard white granule membrane.
• Lightweight—instaIIed premium roof systems weigh less than 3 pounds per square foot.
• Resilient—RUBEROID® EnergyCap™ Torch Granule FR’s polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
• Durable—specially formulated modified asphalt gives RUBEROID® EnergyCap™ Torch Granule FR lasting performance.
• RUBEROID® EnergyCap™ Torch Granule FR membrane is backed by GAF, a company with over 100 years in the roofing business.
Advantages (Continued) • RUBEROID® EnergyCap™ Torch
Granule FR is available in high reflective brilliant white only.
RUBEROID®
ENERGYCAP™TORCH GRANULE FR
product specifications (nominal)Roll Size 1 square
(106.7 gross sq.ft.) (9.9m2)
Roll Length 32.4’ (10.3m)
Roll Width 39.5” (1.0m)
Approx.Roll Weight 106 lbs (48.1kg)ProductThickness 0.160” (4mm)
InitialEmissivity .81
InitialReflectivity .84
SRI (Solar Reflective Index) 104
This product meets or exceeds the following ASTM D6222, Type I, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0F (min), lbf/in ASTM D5147 60
Elongation @ 0F (nom.), % ASTM D5147 10
Low Temperature Flexibility (max.), F ASTM D5147 32
Tear Strength (min), lbf ASTM D5147 70
Dimensional Stability, % ASTM D5147 0.5
Applicable standardsMeets ASTM D6222, Type I, Grade G
FM Approved
Meets CGSB-37-GP-56M
HUD Material Release #1216A
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
Texas Department of Insurance
Ul/ULc Listed
CRRC Listed
Title 24 Compliant
ENERGY STAR® Listed
Note: The emittance and reflectance values published are those required for Title 24 compliance as listed by CRRC. For certification or other reflectance and emittance code requirements, different calculations may be used resulting in different values. All EnergyCap products meet LEED requirements. Please contact technical services at 1-800-766-3411 for assistance and submittal information.
-
©2012 GAF 1/12 37 www.gaf.com • 1-800-ROOF-411
description RUBEROID® TORCH GRANULE membrane is a tough, resilient modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, resilient, non-woven polyester mat that is coated with weather resistant APP polymer modified asphalt.uses RUBEROID TORCH GRANULE is designed for new roofing and reroofing applications as well as flashings. RUBEROID TORCH GRANULE is also an ideal product for repairs of built-up roofing membrane or other modified bitumen systems.Advantages • Typical system guarantees
available for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
• Cost effective—the installed cost of RUBEROID TORCH is less than most single-ply systems on the market today.
• Lightweight—installed roof designs weigh less than 2 pounds per square foot.
• Resilient—RUBEROID TORCH’s polyester mat core allows it to resist splits and tears due to its pliability and elongation characteristics.
Advantages (Continued) • Durable—specially formulated
modified asphalt for lasting performance.
• RUBEROID TORCH GRANULE is backed by GAF, a company with over 100 years in the roofing business.
• Available in smooth surface and two granular colors: black and white
RUBEROID®TORCH GRANULE
product specifications (nominal)Roll Size 1 square
(106.5 gross sq.ft.) (9.8m2)
Roll Length 32.3’ (9.8m)
Roll Width 39.58” (.625m)
Approx.Roll Weight 99 lbs (44.9kg)
ProductThickness 0.160” (4mm)
This product meets or exceeds the following ASTM D6222, Type I, Grade G, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 60
Elongation @ 0°F (min), % ASTM D5147 10
Low Temperature Flexibility (max), °F ASTM D5147 32
Tear Strength (min), lbf ASTM D5147 70
Dimensional Stability, (max) % ASTM D5147
-
©2012 GAF 1/12 38 www.gaf.com • 1-800-ROOF-411
description RUBEROID® TORCH SMOOTH membrane is a tough, resilient modified bitumen membrane manufactured to stringent GAF specifications. Its core is a strong, resilient, non-woven polyester mat that is coated with weather resistant, APP polymer modified asphalt. The membrane is available with smooth surface. uses RUBEROID TORCH SMOOTH is designed for new roofing and reroofing applications as well as flashings. RUBEROID TORCH SMOOTH is also an ideal product for repairs of built-up roofing membranes or other modified bitumen systems.Advantages • Typical system guarantees
available for up to 15 years, select system constructions available with up to 20 year guarantee coverage.
• Cost effective—the installed cost of RUBEROID TORCH SMOOTH is less than most single-ply systems on the market today.
• Lightweight— installed roof designs weigh less than 2 pounds per square foot.
• Resilient — RUBEROID TORCH SMOOTH’s polyester mat core allows it to resist splits and tears due to its pliability
Advantages (Continued) • and elongation characteristics.• Durable—specially formulated
modified asphalt for lasting performance.
• RUBEROID TORCH SMOOTH is backed by GAF, a company with over 100 years in the roofing business.
RUBEROID®TORCH SMOOTH
product specifications (nominal)Roll Size 1 square
(106.5 gross sq.ft.) (9.8m2)
Roll Length 32.25’ (9.8m)
Roll Width 39.625” (1.0m)
Approx.Roll Weight 83.2 lbs (37.74kg)
ProductThickness 0.148” (3.8mm)
This product meets or exceeds the following ASTM D6222, Type I, Grade S, minimum requirements:
property test Method ValueTensile Strength @ 0°F (min), lbf/in ASTM D5147 60
Elongation @ 0°F (min), % ASTM D5147 10
Low Temperature Flexibility (max), °F ASTM D5147 32
Tear Strength (min), lbf ASTM D5147 70
Dimensional Stability, (max) % ASTM D5147 0.5
Applicable standardsMeets ASTM D6222, Type I, Grade S
FM Approved
Meets CGSB-37-GP-56M
ICC ESR#1274
Miami-Dade County Product Control Approval
State of Florida Product Approval
Texas Department of Insurance
UL/ULc Listed
-
©2012 GAF 1/12 39 www.gaf.com • 1-800-ROOF-411
description GAFGLAS® EnergyCap™ BUR is a mineral surfaced cap sheet surfaced with extra fine mineral granules and a factory applied layer of TOPCOAT® EnergyCote™ elastomeric coating.uses GAFGLAS® EnergyCap™ BUR mineral surfaced cap sheet is used as the surfacing ply in the application of hot applied built-up roofs and as a top ply in base flashing construction. Advantages • Cost effective—ENERGY STAR®
qualified, Title 24 compliant cap sheet, without the added expense of installing a reflective coating after the roof is installed.
• Systems guarantees up to 20 years available.
• Durability—glass base resists the effects of moisture on the roof system.
• Code approvals—UL Class A, B, or C membrane constructions are available.
product specifications (nominal)
Roll Size 1 square(106.9 gross sq.ft.) (9.9m2)
Roll Length 32.6’ (9.9m)
Roll Width 39.4” (1.0m)
Approx.Roll Weight 73 lbs (33.1kg)
Emissivity 0.90
Reflectivity 0.80
SRI (Solar Reflective Index) 100
Applicable standardsMeets ASTM D3909, ASTM E903, ASTM E408
ICC Evaluation Report Pending
TItle 24 Compliant
ENERGY STAR® Qualified
UL/ULc Listed
GAFGLAS®
ENERGYCAP™BUR MINERAL SURFACED CAP SHEET
Note: The emittance and reflectance values published are those required for Title 24 compliance as listed by CRRC. For certification or other reflectance and emittance code requirements, different calculations may be used resulting in different values. All EnergyCap products meet LEED requirements. Please contact technical services at 1-800-766-3411 for assistance and submittal information.
-
©2012 GAF 1/12 40 www.gaf.com • 1-800-ROOF-411
GAFGLAS®MINERAL SURFACED CAP SHEET
product specifications (nominal)Roll Size 1 square
(107 gross sq.ft.) (9.9m2)
Roll Length 32.6’ (9.9m)
Roll Width 39.375” (1.0m)
Approx.Roll Weight 68 lbs (30.8kg)
Applicable standards
Meets ASTM D3909
FM Approved
Miami-Dade County Product Control Approval
State of Florida Product Approval
UL/ULc Listed
description GAFGLAS® Mineral Surfaced Cap Sheet is an asphalt-coated glass fiber mat cap sheet surfaced with mineral granules. uses GAFGLAS Mineral Surfaced Cap Sheet