longmen getmore polyurethane co., ltd · longmen getmore polyurethane co., ltd technical report:...

Bureau Veritas Shenzhen Co., Ltd., Dongguan Branch No.34, Chenwulu section, Guantai Rd., Houjie Town, Dongguan City, Guangdong Province, China 523942 Tel: +86-769-85935656 Fax: +86-769-85991080 www.bureauveritas.com/cps

This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/cps and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents.

LONGMEN GETMORE POLYURETHANE CO., LTD

Technical Report: (8814)176-0061 Jul 18, 2014 Date Received: Jun 26, 2014 of 35

LONGMEN GETMORE POLYURETHANE CO., LTD MAXING VILLAGE, YONGHAN TOWN, LONGMEN, HUIZHOU CITY, GUANGDONG, CHINA

Sample Description: LIGHT STAX (LIGHT-UP BUILDING BLOCK) Vendor: N/A Sample Size: N/A Manufacturer: N/A Style No(s): 12PCS TRY ME

VERSION Buyer: N/A SKN/SKU No.: N/A Labeled Age Grade: NOT PRESENT PO No.: N/A Appropriate Age Grade: NOT REQUESTED Ref #: N/A Client Specified Age Grade:

3+ Country of Origin: CHINA

Tested Age Grade: OVER 3 YEARS OF AGE Country of Destination: EU UPC Code: N/A Assortment No.: N/A Test Starting Date: JUN 26, 2014 Test Finished Date: JUL 18, 2014

EXECUTIVE SUMMARY: The sample(s) MEETS the following requirement(s): - The mechanical and physical properties requirements of the tested subclauses of the European Standard,

“Safety of toys”, EN71: Part 1:2011, incorporating amendment A3: 2014 clauses 1-7. - The flammability requirements of the European Standard "Safety of Toys”, EN 71: Part 2: 2011+A1: 2014. The tested component sample(s) MEETS the following requirement(s): - The migration of certain elements in Category III - Scraped off toy material requirements of the European

Standard, “Safety of Toys”, EN 71 Part 3: 2013. - The cadmium content requirement of the European Regulation (EC) No. 1907/2006 of the Registration,

Evaluation, Authorisation and Restriction of Chemicals (REACH), Annex XVII concerning the Restrictions on the manufacture, placing on the market and use of certain dangerous substances, preparations and articles, Item no. 23.

To be continued

BUREAU VERITAS SHENZHEN CO.,LTD DONGGUAN BRANCH

Harvey Xue

Assistant Manager, Analytical & Toys Lab RT/OJ REMARK If there are questions or concerns on this report, please contact the following persons: Report Enquiry: (86) 0769 85935656 Ext. 8282 [email protected] Business Contact: (86) 0769 85893595 This report shall not be reproduced except in full, without the written approval of our laboratory.

LONGMEN GETMORE POLYURETHANE CO., LTD Technical Report: (8814)176-0061

Jul 18, 2014 of 35

EXECUTIVE SUMMARY: The tested component sample(s) MEETS the following requirement(s): - The BBP, DBP and DEHP content requirements of the European Regulation (EC) No. 1907/2006 of the

Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), Annex XVII concerning the Restrictions on the manufacture, placing on the market and use of certain dangerous substances, preparations and articles, Item no. 51.

- The DNOP, DINP and DIDP content requirements of the European Regulation (EC) No. 1907/2006 of the

Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), Annex XVII concerning the Restrictions on the manufacture, placing on the market and use of certain dangerous substances, preparations and articles, Item no. 52.

- The DBT, DOT and tri-substituted organostannic compound content requirements of the European Regulation

(EC) No. 1907/2006 of the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH), Annex XVII concerning the Restrictions on the manufacture, placing on the market and use of certain dangerous substances, preparations and articles, Item no. 20 (4, 5 & 6).

- The heavy metals content / labeling / removal of waste batteries requirement of the European “Council Directives

2006/66/EC on batteries and accumulators and waste batteries and accumulators”. - The heavy metals requirements of the European "Council Directive 94/62/EC of 20 December 1994 on packaging

and packaging waste." - European Council Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in

Electrical and Electronic Equipment (RoHS). - The Polycyclic Aromatic Hydrocarbons (PAHs) Content requirement of § 30 LFGB, (Lebensmittel-

,Bedarfsgegenstände- und Futtermittelgesetzbuch), Chem Verbots V., method ZEK 01.4-08, “Testing and validation of PAHs in products in the course of GS-Mark Certification”.

Note: At the request of the client, the sample(s) was evaluated for use by children 3+. Note: Only importer name and address was presented on the packaging. If the manufacturer (declaring himself as

manufacturer by establishing and signing the EC declaration of conformity) is outside the community and the products are placed on the EU market by an importer, the toy will bear two company name and addresses: the one of the manufacturer and the one of the importer.

Note: According to TSD 2009/48/EC, manufacturers shall ensure that their toys bear a type, batch, serial or model

number or other element allowing their identification, or, where the size or nature of the toy does not allow it, that the required information is provided on the packaging or in a document accompanying the toy.

Note: According to TSD 2009/48/EC, the manufacturers and importer shall indicate their name, registered trade

name or registered trade mark and the address at which they can be contacted on the toy, or, where that is not possible, on its packaging or in a document accompanying the toy. The importer information presented on packaging only.

Note: At the request of client, heavy metal ,phthalates and PAHs test(s) was conducted on the certain

component(s) of the submitted sample(s) / submitted component(s). Note: The composite test sample(s) of the submitted samples was prepared in the manner requested by the client,

when subject to the test performed.


Jul 18, 2014 of 35

RESULTS:

APPROPRIATE AGE GRADE DETERMINATION

The Appropriate Age Grade is determined with reference to the EN71 : Part 1 : 2011, CR 14379:2002 "Classification of toys-Guidelines" prepared by Technical Committee CEN TC 52 and Age Grade Determination Guidelines of the Consumer Product Safety Commission (CPSC).

Note : The most stringent age grade from the Labeled Age Grade and the Appropriate Age Grade will be used for testing.

Note : If the client does not specify an age grade for testing or request Bureau Veritas Consumer Products Services, Inc. to determine an appropriate age grade, the labeled age grade will be used for testing.

EXPLANATION OF THE ABBREVIATIONS FOR PART 1, 2 & 6

Symbol Explanation NM The sample(s) DOES NOT MEET the requirement of this Subclause M The sample(s) MEET the requirement of this Subclause

N/A Not Applicable NR Not Requested NE Not Evaluated NT Not Tested NP None Present P Present R Refer to Comment Section of this report

Symbol Language Present Symbol Language Present Symbol Language Present B Belgian language G German language PR Portuguese language D Danish language GR Greek language S Spanish language E English language H Dutch language SD Swedish language F Finnish language I Italian language SZ Swiss language

FR French language N Norwegian language


Jul 18, 2014 of 35

RESULTS:

MECHANICAL & PHYSICAL PROPERTIES (EN 71: PART 1 – 2011+A3:2014)

Subclause Requirement Result

4.1 Material cleanliness M

4.2 Assembly NA

4.3 Flexible plastic sheeting NA

4.4 Toy Bags NA

4.5 Glass NA

4.6 Expanding materials NA

4.7 & 7.6 Edges M

4.8 & 7.6 Points and metallic wires M

4.8e Splinters M

4.9 Protruding parts M

4.10.1 Folding and sliding mechanisms NA

4.10.2 Driving mechanisms NA

4.10.3 Hinges NA

4.10.4 Springs M

4.11 Mouth actuated toys and other toys intended to be put in the mouth

NA

4.12 & 7.3 Balloons NA

4.13 & 7.9 Cord of toy kites and other flying toys NA

4.14.1 Toys which a child can enter NA

4.14.2 & 7.8 Masks and helmets NA

4.15.1 Toys propelled by child

4.15.1.2 & 7.10.1 & 7.10.2 & 7.10.3 & 7.10.4 & 7.16

Toys propelled by child – Instructions for use NA

4.15.1.3 Toys propelled by child – Strength NA

4.15.1.4 Toys propelled by child – Stability NA

4.15.1.5 Toys propelled by child – Braking NA

4.15.1.6 Toys propelled by child - Transmission NA

4.15.1.7 Toys propelled by child – insertion mark NA

4.15.1.8 Electrically-driven ride-on toys NA

4.15.2 Toy bicycles

4.15.2.2 & 7.15 Toy bicycles – Warnings and instructions for use NA

4.15.2.3 Toy bicycles – Braking NA

4.15.3 & 7.16 & 7.19 Rocking horses and similar toys NA

4.15.4 & 7.16 Toys not propelled by child NA

4.15.5 & 7.18 Toy scooters NA


Jul 18, 2014 of 35

RESULTS:


4.16 Heavy immobile toys NA

4.17.1 Projectiles – General NA

4.17.2 Projectiles toys without stored energy NA

4.17.3 & 7.7 Projectile toys with stored energy NA

4.17.4 & 7.7 Bows and arrows NA

4.18 & 7.4 Aquatic toys and inflatable toys NA

4.19 & 7.13 & 7.14 Percussion caps NA

4.20.2.1- 4.20.2.8, 4.20.2.10, 4.20.2.12

Acoustics NA

4.20.2.9, 4.20.2.11 & 7.14

Acoustics – percussion toys & cap-firing toys NA

4.21 Toys containing a non-electrical heat source NA

4.22 & 7.2 Small balls NA

4.23 Magnet

4.23.2 a, b & c Toy other than magnetic / electrical experimental setsintended for children over 8 years

NA

4.23.3 & 7.20 Magnetic / electrical experimental sets intended for children over 8 years

NA

4.24 Yo-yo ball NA

4.25 Toys attached to food NA

FOR TOYS INTENDED FOR CHILDREN UNDER 36 MONTHS

5 Cleaning instruction for item intended for child under 3 years of age

NA

5.1 General NA

5.1a Small parts – as received NA

5.1b Small parts, sharp points, sharp edges – after tests NA

5.1c Cross section <2mm metal points & wires NA

5.1e Toys contain glue NA

5.1f Casing of toys NA

5.2 Filings, coverings and seams NA

5.3 Adhesion of plastic sheeting NA

5.4 & Cords on toys NA

5.4(a) Cords connected to self-retraction mechanism or in pull along toys

NA

5.4(b) & 7.22 Cords and chains that can form tangled loop or noose NA

5.4(c) & 7.22 Fixed loop of cords or chains NA

5.4(d) Nooses NA

5.4(e) Self-retraction mechanism NA

5.4(f) & 7.11 Toy across cradle, cot or perambulator NA


Jul 18, 2014 of 35

RESULTS:


5.4(g) & 7.22 Cords and chains with free end (exclude pull along toy) NA

5.4(h) Cords and chains with free end on pull along toy NA

5.4(i) & 7.21 Electrical cables NA

5.5 & 7.12 Liquid filled toys NA

5.6 Electrically driven toys NA

5.7 Glass and porcelain NA

5.8 Shape and size NA

5.9 & 7.17 Monofilament fibres NA

5.10 Small balls NA

5.11 Play figures NA

5.12 Hemispheric shaped toys NA

5.13 Suction cups NA

5.14 Straps intended to be worn fully or partially around the neck NA

6 Packaging NA

WARNINGS, INSTRUCTIONS FOR USE

7 CE Mark M

7 Manufacturer name and address M

7 Importer name and address M

7 Product Identification M

7.1 General NA

7.2 Toys not intended for children under 36 months NA

7.5 Functional toys NA


Jul 18, 2014 of 35

RESULTS:

REQUIREMENTS & TEST METHODS CROSS REFERENCE TABLE FOR PART 1

Sub-clause

Test Method Sub-clause



Test Method

4.3 8.25.1 4.14.2 8.3, 8.4.2.1, 8.5, 8.7, 8.8,

8.11, 8.12 4.17.3 8.24.1 5.3 8.4.2.1, 8.25

4.5 8.5, 8.7, 8.11, 8.12 4.15.1.3 8.11, 8.12,

8.21, 8.22 4.17.4 8.24.2 5.4 8.20, 8.36, 8.38, 8.39,

8.40

4.6 8.2, 8.3,

8.4.2.1, 8.5, 8.7, 8.8, 8.14

4.15.1.4 8.23.1 4.18 8.2, 8.3, 8.4.2.1

5.5 8.15

4.7 8.11 4.15.1.5 8.26.1 4.20 8.28 5.6 8.29

4.8 8.12, 8.13 4.15.1.8 8.29 4.21 8.30 5.8 8.16

4.9 8.4.2.3, 8.11, 8.12 4.15.2.4 8.26.2 4.22

8.3, 8.4.2.1, 8.5, 8.6, 8.7,

8.8, 8.32 5.10

8.3, 8.4.2.1, 8.5, 8.6, 8.7, 8.8, 8.9, 8.32

4.10.1 8.18.2, 8.18.3 4.15.3 8.21, 8.23.1 4.23

8.2, 8.3, 8.4.2.1,

8.4.2.2, 8.5, 8.6, 8.7, 8.8,

8.34, 8.35

5.11 8.33

4.10.2 8.5, 8.6, 8.7, 8.11, 8.12 4.15.4 8.21, 8.23.1 4.24 8.37 5.12

8.3, 8.4.2.1, 8.5, 8.6, 8.7,

8.8, 8.9,

4.11 8.2, 8.3,

8.4.2.1, 8.9, 8.17

4.15.5 8.11, 8.12, 8.21, 8.22,

8.26.3, 8.27 4.25

8.2, 8.3, 8.4.2.1, 8.5,

8.7, 8.8, 8.32.1 5.13

8.3, 8.4.2.1, 8.5, 8.7, 8.8,

8.32

4.13 8.19 4.16 8.23.2 5.1

8.2, 8.3, 8.4.2.1, 8.5, 8.7, 8.8, 8.9,

8.11, 8.12

4.14.1 8.31.1, 8.31.2 4.17.1 8.4.2.3


Jul 18, 2014 of 35

RESULTS:

FLAMMABILITY (EN 71 PART 2: 2011+A1: 2014)


4.1 Cellulose nitrate NP

4.1 Surface flash on a piled surface NA

*4.1 Flammable gases NA

*4.1 Extremely flammable liquids, highly flammable liquids, flammable liquids and flammable gels

NA

4.2 Toys to be worn on the head NA

4.3 Toy disguise costumes and toys intended to be worn by child in play NA

4.3 warning on product and packaging (10 - 30 mm/s)

NA

4.4 Toys intended to be entered by a child NA

4.4 warning on product and packaging (10 – 30 mm/s)

NA

4.5 Soft-filled toys NA

REQUIREMENTS & TEST METHODS CROSS REFERENCE TABLE FOR PART 2

Sub-clause Test Method




4.2.2 5.2 4.2.4 5.3 4.3 5.4 4.5 5.5

4.2.3 5.3 4.2.5 5.4 4.4 5.4 - - * Note: Subclause indicated with * are not accredited.


Jul 18, 2014 of 35

RESULTS: Migration of Certain Elements – European Standard EN 71 Part 3: 2013

Test Method: European Standard EN 71 Part 3: 2013, Annex E.

Class: Category III - Scraped off toy material

Test Item(s) Item / Component Description(s) Location(s) Style(s)

I001 White plastic Pin holder of USB plug

I002 Black plastic Pin holder of plug

I003 Yellow plastic Blocks

I004 Orange plastic Blocks

I005 Off white plastic Blocks

I006 Blue plastic Blocks

I007 Green plastic Blocks

I008 Red plastic Blocks

I009 Black plastic Blocks

I010 Soft white plastic Logo

I011 Clear plastic Blocks

I012 Black PVC Case of USB

I013 White printed bright black PVC Wire

I014 Off black PVC Case of USB


Jul 18, 2014 of 35

RESULTS:

Result (mg/kg) Requirement (mg/kg) Test Item(s) Analyte

Category III I001 I002 I003 I004

Aluminium (Al) 70000 LT 2 6 LT 2 LT 2

Arsenic (As) 47 LT 2 LT 2 LT 2 LT 2

Boron (B) 15000 LT 2 2 LT 2 LT 2

Barium (Ba) 18750 4 LT 2 LT 2 LT 2

Cadmium (Cd) 17 LT 2 LT 2 LT 2 LT 2

Cobalt (Co) 130 LT 2 LT 2 LT 2 LT 2

Chromium III (Cr III) 460

Chromium VI (Cr VI) 0.2 LT 0.15 LT 0.15 LT 0.15 LT 0.15

Copper (Cu) 7700 3 46 LT 2 LT 2

Mercury (Hg) 94 LT 2 LT 2 LT 2 LT 2

Manganese (Mn) 15000 LT 2 LT 2 LT 2 LT 2

Nickel (Ni) 930 LT 2 13 LT 2 LT 2

Lead (Pb) 160 LT 2 LT 2 LT 2 LT 2

Antimony (Sb) 560 LT 2 LT 2 LT 2 LT 2

Selenium (Se) 460 LT 2 LT 2 LT 2 LT 2

Tin (Sn) 180000 6 114 LT 2 LT 2

Organic tin 12 LT 2# LT 2# LT 2 LT 2

Strontium (Sr) 56000 LT 2 LT 2 LT 2 LT 2

Zinc (Zn) 46000 LT 2 10 2 LT 2

Mass of trace amount (gram) - - - -

Conclusion PASS PASS PASS PASS


Jul 18, 2014 of 35

RESULTS:



Aluminium (Al) 70000 LT 2 LT 2 LT 2 LT 2


Boron (B) 15000 LT 2 LT 2 LT 2 LT 2

Barium (Ba) 18750 LT 2 LT 2 LT 2 LT 2




Chromium VI (Cr VI) 0.2 LT 0.15 LT 0.15 LT 0.15 LT 0.15

Copper (Cu) 7700 LT 2 LT 2 LT 2 LT 2



Nickel (Ni) 930 LT 2 LT 2 LT 2 LT 2




Tin (Sn) 180000 LT 2 LT 2 LT 2 LT 2

Organic tin 12 LT 2 LT 2 LT 2 LT 2


Zinc (Zn) 46000 LT 2 LT 2 LT 2 LT 2




Jul 18, 2014 of 35

RESULTS:



Aluminium (Al) 70000 LT 2 LT 2 LT 2 5


Boron (B) 15000 LT 2 LT 2 LT 2 LT 2

Barium (Ba) 18750 LT 2 LT 2 LT 2 LT 2




Chromium VI (Cr VI) 0.2 LT 0.15 LT 0.15 0.16 LT 0.15

Copper (Cu) 7700 LT 2 LT 2 LT 2 LT 2



Nickel (Ni) 930 LT 2 LT 2 LT 2 LT 2




Tin (Sn) 180000 LT 2 LT 2 LT 2 3.5

Organic tin 12 LT 2 LT 2 LT 2 9


Zinc (Zn) 46000 LT 2 LT 2 3 3




Jul 18, 2014 of 35

RESULTS:


Category III I013 I014 - -

Aluminium (Al) 70000 3 4 - -

Arsenic (As) 47 LT 2 LT 2 - -

Boron (B) 15000 LT 2 LT 2 - -

Barium (Ba) 18750 LT 2 LT 2 - -

Cadmium (Cd) 17 LT 2 LT 2 - -

Cobalt (Co) 130 LT 2 LT 2 - -


Chromium VI (Cr VI) 0.2 LT 0.15 LT 0.15 - -

Copper (Cu) 7700 LT 2 LT 2 - -

Mercury (Hg) 94 LT 2 LT 2 - -

Manganese (Mn) 15000 LT 2 LT 2 - -

Nickel (Ni) 930 LT 2 LT 2 - -

Lead (Pb) 160 LT 2 LT 2 - -

Antimony (Sb) 560 LT 2 LT 2 - -

Selenium (Se) 460 LT 2 LT 2 - -

Tin (Sn) 180000 LT 2 LT 2 - -

Organic tin 12 LT 2 LT 2 - -

Strontium (Sr) 56000 LT 2 LT 2 - -

Zinc (Zn) 46000 4 4 - -


Conclusion PASS PASS - -

mg/kg = milligrams per kilogram (ppm=parts per million) LT = Less Than * = Average of duplicate analysis Organic tin = migration of total organic tin is expressed as tributyl tin cation content in mg/kg # = Verified results (see note) Remark:

- Results of Cr III and Cr VI were reported as sum of soluble Chromium content unless specified. - Result(s) of organic tin was (were) calculated while assuming the tin content wholly contributed from tributyltin cation unless specified.

-The item(s) 012~014 was/were parts and provided by client dated on Jul 14, 2014. Note: If soluble chromium content or soluble tin content exceeded the screening limits of soluble chromium (VI) or organic tin content, the results were verified by below method

- Chromium VI: In house Ion-chromatography analysis - Organic tin: EN71 part 3:2013, Annex G by Gas Chromatography – Mass Spectroscopy analysis.


Jul 18, 2014 of 35

RESULTS: Total Cadmium Content – European Regulation (EC) No. 1907/2006 REACH Annex XVII, Item no. 23

Test Method : BS EN 1122: 2001, Method B and Acid digestion followed by Atomic Absorption Spectrophotometry or Inductively Coupled Plasma Spectrometry.


I001 Shiny silver coating Bottom -

I002 White coating Bottom -

I003 White plastic Pin holder of USB plug -

I004 Black plastic Pin holder of plug -

I005 Yellow plastic Blocks -

I006 Orange plastic Blocks -

I007 Off white plastic Blocks -

I008 Blue plastic Blocks -

I009 Green plastic Blocks -

I010 Red plastic Blocks -

I011 Black plastic Blocks -

I012 Soft white plastic Logo -

I013 Clear plastic Blocks -

I014 Black PVC Case of USB -

I015 White printed bright black PVC Wire -

I016 Off black PVC Case of USB -

I017 Bright black plastic Button of PCB -

I018 Clear glue Glue of PCB -

I019 Dull white plastic Connection of wire -

I020 Soft black plastic PCB -

I021 Black PVC Insulation of USB -

I022 Red PVC Insulation of USB -

I023 Bright black PVC Wire -

I024 Bright red PVC Wire -


Jul 18, 2014 of 35

RESULTS:

Type I Paints on Painted Article: 1000 mg/kg

Type II Plastics: 100 mg/kg Maximum

Allowable Limit : Type III Metals in Jewellery: 100 mg/kg

Result

Test Item(s) Type Total Cadmium (Cd)

Unit Conclusion

I001+I002 I ND mg/kg PASS

I003+I004+I005+I006 II ND mg/kg PASS


I011+I012+I013 II ND mg/kg PASS

I014+I015+I016 II ND mg/kg PASS



Note / key:

ND = Not detected mg/kg = milligram(s) per kilogram Detection Limit (mg/kg) : 10

Remark:

- The item 001 & 002 were spraying parts and provided by client dated on Jul 8, 2014. - The item(s) 015~017 & 023-024 was/were parts and provided by client dated on Jul 14, 2014.


Jul 18, 2014 of 35

RESULTS: BBP/DBP/DEHP Contents in Toys and Childcare Articles – European Regulation (EC) No. 1907/2006 REACH Annex XVII, Item no. 51

Test Method : Sample was extracted with organic solvent and then analyzed by Gas Chromatograph Mass Spectrometer.


















I017 Bright black plastic Button of PCB -

I018 Clear glue Glue of PCB -

I019 Dull white plastic Connection of wire -

I020 Soft black plastic PCB -

I021 Black PVC Insulation of USB -

I022 Red PVC Insulation of USB -

I023 Bright black PVC Wire -

I024 Bright red PVC Wire -


Jul 18, 2014 of 35

RESULTS:

Test Parameter: BBP DBP DEHP SUM -

Limit (%): 0.1 (Sum of three phthalates) -

Test Item(s) Result (%) Conclusion

I001+I002 ND ND ND ND PASS

I003+I004+I005 ND ND ND ND PASS









Note / key:

BBP = Butyl benzyl phthalate DBP = Dibutyl phthalate DEHP = Di(2-ethylhexyl) phthalate ND = Not detected % = percent 10000 mg/kg = 1 % mg/kg = milligram(s) per kilogram Detection Limit (%) : Each 0.005

Remark:

- The item 001 & 002 were spraying parts and provided by client dated on Jul 8, 2014. - The item(s) 015~017 & 023-024 was/were parts and provided by client dated on Jul 14, 2014.


Jul 18, 2014 of 35

RESULTS: DNOP/DINP/DIDP Contents in Toys and Childcare Articles which can be placed in the Mouth by the Children – European Regulation (EC) No. 1907/2006 REACH Annex XVI I, Item no. 52

Test Method : Sample was extracted with organic solvent and then analyzed by Gas Chromatograph Mass Spectrometer.


















Test Parameter: DIDP DINP DNOP SUM -

Limit (%): 0.1 (Sum of three phthalates) -

Test Item(s) Result (%) Conclusion







Note / key:

DNOP = Di-n-octyl phthalate DINP = Di-iso-nonyl phthalate DIDP = Di-iso-decyl phthalate ND = Not detected % = percent 10000 mg/kg = 1 % mg/kg = milligram(s) per kilogram Detection Limit (%) : Each 0.005

Remark:

- The item 001 & 002 were spraying parts and provided by client dated on Jul 8, 2014. - The item(s) 015~017 was/were parts and provided by client dated on Jul 14, 2014.


Jul 18, 2014 of 35

RESULTS:

DBT, DOT AND TRI-SUBSTITUTED ORGANOSTANNIC COMPOUND (Euro pean Regulation (EC) No. 1907/2006 REACH Annex XVII, Item no. 20 (4, 5 & 6))

Test Method: In house test method (ICP screening / GC-MS analysis)

Sample Identity

Test Component Location Style

A. Black PVC

White printed

Bright black PVC

Plug

Wire of plug

B. Silver printed translucent plastic

Black plastic

Yellow plastic

Button

Base

Block

C. Orange plastic

Red plastic

Green plastic

Block

Block

Block

D. Dark blue plastic

White plastic

Clear plastic

Block

Block

Joint

E. Red PVC

Black PVC

Wire inner base

Wire inner base

F. Light red PVC

Soft black PVC

Inner wire of plug

Inner wire of plug

G. Yellow/white body/metal EC on PCB inner block

H. White printed black body/metal EC on PCB

I. White printed brown plastic/metal PCB inner block

J. Grey printed black body/metal EC on PCB inner base(D1,D2)

K. White printed

Green/dark green body/metal

EC on PCB inner base(F1)

L. Black printed soft white body/metal Led on PCB inner base

M. Dull black body/metal EC on PCB inner base(SW1)

N. Brown body/silvery metal EC on PCB inner base(C1)

O. Matt black body/metal EC on PCB inner base(U1)


Jul 18, 2014 of 35

RESULTS:



Sample Identity

Test Component Location Style

P. Green /orange printed clear body/metal EC on PCB inner base(DW1)

Q. Dull black body/metal EC on PCB inner base(Q1,Q2…)

R. Green/dark green printed white body/metal

Small PCB inner base

S. White/light green printed brown plastic/

Metal

Big PCB inner base

T. Dull black plastic/

Bright white plastic

Soft black plastic

Pin

Plug

Inner button

U. Dull white plastic

Matt black plastic

Plug & socket inner base

Socket on base


Jul 18, 2014 of 35

RESULTS:



Test Parameter: Tri-substituted Organotin compound

DBT DOT

Limit (% by weight of tin):

0.1 0.1 0.1

Sample Result (%) Conclusion

Type I: Type II: Type III:

A. ND ND ND Pass

B. ND ND ND Pass

C. ND ND ND Pass

D. ND ND ND Pass

E. ND ND ND Pass

F. ND ND ND Pass

G. ND ND ND Pass

H. ND ND ND Pass

I. ND ND ND Pass

J. ND ND ND Pass

K. ND ND ND Pass

L. ND ND ND Pass

M. ND ND ND Pass

N. ND ND ND Pass

O. ND ND ND Pass

P. ND ND ND Pass

Q. ND ND ND Pass

R. ND ND ND Pass

S. ND ND ND Pass

T. ND ND ND Pass

U. ND ND ND Pass

Detection Limit : Results reported in percentage DBT = Dibutyltin (0.01% by weight of tin) LT = Less than DOT = Dioctyltin (0.01% by weight of tin) ND = None detected

Remark: This list of Organotin compound is summarized in table of appendix


Jul 18, 2014 of 35

RESULTS: Appendix

List of Organotin compound Type Name of Analyte Type Name of Analyte

I

Tri-substituted Organotin compound - Tripropyltin(TPT) - Tributyltin (TBT) - Trioctyl tin(TOT) - Triphenyltin (TPhT) - Tricyclohexyltin(TcyT)

III Dioctyltin

II Dibutyltin (DBT) - -

List of sample type Type Description

I Articles, or part thereof, placed on the market after 1 July 2010

II Mixtures of articles, or part thereof, placed on the market after 1 January 2012, except materials and articles regulated under Regulation (EC) No 1935/2004; and For the following mixtures or articles, or part thereof, placed on the market after 1 January 2015, - one-component and two-component room temperature vulcanization sealants (RTV-1 and RTV-2

sealants) and adhesives - paints and coatings containing DBT compounds as catalysts when applied on articles, - soft polyvinyl chloride (PVC) profiles whether by themselves or coextruded with hard PVC, - fabrics coated with PVC containing DBT compounds as stabilisers when intended for outdoor

application, - outdoor rainwater pipes, gutters and fittings, as well as covering material for roofing and facades.

III Articles, or part thereof, placed on the market after 1 January 2012, - textile articles intended to come into contact with the skin, - gloves, - footwear or part of footwear intended to come into contact with the skin, - wall and floor coverings, - childcare articles, - female hygiene products, - nappies, - two-component room temperature vulcanization moulding kits (RTV-2 moulding kits)


Jul 18, 2014 of 35

RESULTS:

BATTERIES AND ACCUMULATORS AND WASTE BATTERIES AND ACCUMULA TORS – PORTABLE BATTERIES (European Council Directives 2006/66/EC) Heavy metal content and labeling requirement

Element: Mercury Cadmium Lead

Maximum allowable limit :

0.0005 % 0.002% See remark

Sample Description Result (%) Conclusion Result (%) Conclusion Result (%) Conclusion (A) New leader

AAA R03p 1.5V 0% mercury & cadmium

LT 0.00005 Pass

LT 0.0005 Pass

0.023 Pass with marking 2

LT = Less than * = average of duplicate analysis

Remark: Marking 1: According to 2006/66/EC, all batteries, accumulators and battery packs are appropriately marked

with the symbol as below:

Marking 2: When the sample consists of lead exceeding 0.004%, the product is to be labeled heavy metal

content with the requirements as below - Marked with the chemical symbol for the metal concerned: Pb - Print beneath the symbol - Cover an area of at least ¼ of the size of the symbol

Removal of waste batteries

Requirement: Can be readily removed and shall be accompanied by instructions

Sample Conclusion

(A) New leader AAA R03p 1.5V 0% mercury & cadmium

Pass


Jul 18, 2014 of 35

RESULTS: Heavy Metals Content in Packaging – European Council Directive 94/62/EC on Packaging and Packaging Waste


I001 Black plastic Clapboard -

I002 Clear laminated multi color printed white paper board Box -

I003 Red/ black coating Paper sticker -

I004 White paper with adhesive Paper sticker -

I005 Clear plastic Box -

I006 Yellow /black /red /blue printed white paper Instruction -

I007 Clear plastic Bag -

I008 Black coating Bag -

I009 Soft black PVC Fastener -

I010 Silvery metal Fastener -

Maximum Allowable Limit: Sum of Pb, Cd, Hg & CrVI: 100 mg/kg

Result

Test Item(s) Sum of Pb, Cd, Hg & CrVI

Unit Conclusion

I001 ND mg/kg PASS

I002 ND mg/kg PASS

I003 ND mg/kg PASS

I004 ND mg/kg PASS

I005 ND mg/kg PASS

I006 ND mg/kg PASS

I007 ND mg/kg PASS

I008 ND mg/kg PASS

I009 ND mg/kg PASS

I010 35 mg/kg PASS

Note / key:

Pb = Lead Cd = Cadmium Hg = Mercury CrVI = Hexavalent Chromium ND = Not detected mg/kg = milligram(s) per kilogram Detection Limit (mg/kg) : Sum 20

Remark:

- Unless further specified, the reported result(s) of Test Item(s) was (were) performed by total metal(s) content analysis through complete decomposition. - The item 003 & 008 were spraying parts and provided by client dated on Jul 10, 2014.


Jul 18, 2014 of 35

Results: Test Item Description And Photo List

Test

Item(s) Sample Photo Item / Component Description(s) Location(s) Style(s)

I001 Silvery metal Case, USB plug ,USB cable -

I002 White plastic Pin holder, USB plug ,USB cable -

I003 Golden metal Pin, USB plug ,USB cable -

I004 White plastic Connector, USB plug ,USB cable -

I005 White printed black soft

plastic Cable jacket, USB cable -

I006 Black soft plastic Wire insulation, USB cable -

I007 Red soft plastic Wire insulation, USB cable -

I008 Coppery metal Wire, USB cable -

I009 Silvery plated golden metal Pin, small USB plug, USB cable -

I010 Black plastic Pin holder, small USB plug, USB

cable -

I011 Black soft plastic Case, small USB plug, USB cable -

I012

Silvery solder small USB plug, USB cable -

I013 Green plastic Case, block -

I014 Orange plastic Case, block -

I015 Yellow plastic Case, block -

I016 Blue plastic Case, block -

I017 White plastic Case, block -

I018

Red plastic Case, block -


Jul 18, 2014 of 35

Test


I019 Silvery coated beige plastic Logo -

I020 White coated black plastic Case, block -

I021 Black plastic Battery box, block -

I022 Black plastic Battery cover, block -

I023 Silvery metal Pin, DC socket , block -

I024 Silvery metal Case, DC socket, block -

I025 Translucent plastic Tube, DC socket, block -

I026 Yellow/white body SMD LED,PCB, block -

I027 White printed black body SMD resistor, PCB, block -

I028

White coated brown plastic with coppery metal

PCB, block -

I029 Silvery metal Pin, Connector, block -

I030

Black plastic Connector, block -

I031 Silvery metal Contact plate, block -

I032 Silvery metal Spring, block -

I033 Silvery solder Contact plate, block -

I034 Silvery metal Big screw -

I035 Silvery metal Small screw -

I036 Silvery metal Nut -


Jul 18, 2014 of 35

Test


I037 Silvery metal Case , DC socket , block -

I038 Silvery plated golden metal Pin, DC socket , block -

I039 Black plastic Holder , block -

I040 White plastic Housing -

I041 White plastic Connector -

I042 Silvery plated golden metal Contact plate, PCB -

I043 Black soft plastic Wire insulation, PCB -

I044 Red soft plastic Wire insulation, PCB -

I045 Coppery metal Wire, PCB -

I046

Green coated brown plastic with coppery metal

PCB -

I047 Black plastic Button, contact switch, PCB -

I048 Silvery metal Case, contact switch, PCB -

I049 Black plastic Case, contact switch, PCB -

I050 Silvery metal Contact plate, contact switch, PCB -

I051 Silvery metal Contact point, contact switch, PCB -

I052 White printed black body SMD resistor, PCB -

I053 Black/white body SMD LED, PCB -

I054 Black body SMD diode, PCB -

I055

White coated green body EC”F1”, PCB -


Jul 18, 2014 of 35

Test


I056 Black plastic Case, DC socket , PCB -

I057 Silvery metal Pin, DC socket , PCB -

i058

Silvery metal Case, DC socket , PCB -

I059 Brown body SMD capacitor, PCB -

I060 Black body SMD IC, PCB -

I061 Black body SMD transistor, PCB -

I062 Green coated

transparent/coppery body Glass diode, PCB -

I063 Silvery solder PCB -

I064

Green coated brown plastic with coppery metal

PCB -


Jul 18, 2014 of 35

RESULTS:

Compliance Test - European Council Directive 2011/65 /EU on the Restriction of the Use of Certain

Hazardous Substances in Electrical and Electronic Equip ment (RoHS)

Test Method ： See Appendix.

See Analytes and their corresponding Maximum Allowab le Limit in Appendix

- Result

Parameter Lead (Pb) Cadmium (Cd)

Mercury (Hg)

Chromium VI (Cr VI) PBBs PBDEs Conclusion

Unit mg/kg - Test Item(s) - - - - - - -

I001 ND ND ND ND NA NA PASS I002 ND ND ND ND ND ND PASS I003 ND ND ND ND NA NA PASS I004 ND ND ND ND ND ND PASS I005 ND ND ND ND ND ND PASS I006 ND ND ND ND ND ND PASS I007 ND ND ND ND ND ND PASS I008 ND ND ND ND NA NA PASS I009 ND ND ND ND NA NA PASS I010 ND ND ND ND ND ND PASS I011 ND ND ND ND NA NA PASS I012 ND ND ND ND ND ND PASS I013 ND ND ND ND ND ND PASS I014 ND ND ND ND ND ND PASS I015 ND ND ND ND ND ND PASS I016 ND ND ND ND ND ND PASS I017 ND ND ND ND ND ND PASS I018 ND ND ND ND ND ND PASS I019 ND ND ND ND ND ND PASS I020 ND ND ND ND ND* ND* PASS I021 ND ND ND ND ND ND PASS I022 ND ND ND ND ND ND PASS I023 ND ND ND Negative* NA NA PASS I024 ND ND ND Negative* NA NA PASS I025 ND ND ND ND ND ND PASS I026 ND ND ND ND ND ND PASS I027 ND ND ND ND ND ND PASS I028 ND ND ND ND ND ND PASS I029 ND ND ND ND NA NA PASS I030 ND ND ND ND ND ND PASS I031 ND ND ND ND NA NA PASS I032 ND ND ND ND NA NA PASS I033 ND ND ND ND NA NA PASS I034 ND ND ND Negative* NA NA PASS


Jul 18, 2014 of 35

RESULTS:

- Result

Parameter Lead (Pb) Cadmium (Cd)

Mercury (Hg)

Chromium VI (Cr VI)

PBBs PBDEs Conclusion

Unit mg/kg - Test Item(s) - - - - - - -

I035 ND ND ND ND NA NA PASS I036 ND ND ND Negative* NA NA PASS I037 ND ND ND ND NA NA PASS I038 ND ND ND ND NA NA PASS I039 ND ND ND ND ND ND PASS I040 ND ND ND ND ND ND PASS I041 ND ND ND ND ND ND PASS I042 ND ND ND ND NA NA PASS I043 ND ND ND ND ND ND PASS I044 ND ND ND ND ND ND PASS I045 ND ND ND ND NA NA PASS I046 ND ND ND ND ND ND PASS I047 ND ND ND ND ND ND PASS I048 ND ND ND ND NA NA PASS I049 ND ND ND ND ND ND PASS I050 ND ND ND ND NA NA PASS I051 ND ND ND ND NA NA PASS I052 ND ND ND ND ND* ND* PASS I053 ND ND ND ND ND ND PASS I054 ND ND ND ND ND ND PASS I055 ND ND ND ND ND ND PASS I056 ND ND ND ND ND* ND* PASS I057 ND ND ND ND NA NA PASS I058 ND ND ND ND NA NA PASS I059 ND ND ND ND ND ND PASS I060 ND ND ND ND ND* ND* PASS I061 ND ND ND ND ND ND PASS I062 ND ND ND ND ND ND PASS I063 ND ND ND ND NA NA PASS I064 ND ND ND ND ND* ND* PASS


Jul 18, 2014 of 35

RESULTS:

Note / Key

ND = Not detected “>” = Greater than “<” = Less than NA = Not applicable mg/kg = milligram(s) per kilogram = ppm = part(s) per million % = percent 10000 mg/kg = 1 % Detection Limit : See Appendix.

Remark:

- The testing approach is listed in table of Appendix. - * denotes as reported result(s) was (were) performed by wet chemistry method. Others were

screened by XRF. For XRF screening, the result(s) of Cr VI was (were) reported as total chromium and the result(s) of PBBs and PBDEs was (were) reported as total bromine. Also, the XRF result(s) may be different to the actual content based on various factors including, but not limit to, sample size, thickness, area, non-uniformity composition, surface flatness.

- According to European Council Directive 2011/65/EU, Article 5 “Adaptation of the Annexes to scientific and technical progress”, exemption(s) should be granted to the materials and components of Test Item(s) in the lists in Annexes III and IV of this directive.

APPENDIX:

List of Analytes and their Corresponding Test Metho ds, Detection Limit and Maximum Allowable Limit [ Compliance Test for European Council Directive 201 1/65/EU ] :

Detection Limit (mg/kg)

X-ray fluorescence (XRF) [a] No. Name of Analytes

Plastic Metallic /

glass / ceramic

Others

Wet Chemistry

Maximum Allowable Limit

(mg/kg)

1 Lead (Pb) 100 200 200 10[b] 1000

2 Cadmium (Cd) 50 50 50 10[b] 100

3 Mercury (Hg) 100 200 200 10[c] 1000

4 Chromium (Cr) 100 200 200 NA NA

5 Chromium VI (Cr VI) NA NA NA 10[d] /

See [e, h] 1000 / Negative[h]

6 Bromine (Br) 200 NA 200 NA NA

7

Polybromobiphenyls (PBBs) - Bromobiphenyl (MonoBB) - Dibromobiphenyl (DiBB) - Tribromobiphenyl (TriBB) - Tetrabromobiphenyl (TetraBB) - Pentabromobiphenyl (PentaBB) - Hexabromobiphenyl (HexaBB) - Heptabromobiphenyl (HeptaBB) - Octabromobiphenyl (OctaBB) - Nonabromobiphenyl (NonaBB) - Decabromobiphenyl (DecaBB)

NA NA NA Each 50[f] Sum 1000

8 Polybromodiphenyl ethers (PBDEs) - Bromodiphenyl ether (MonoBDE)

NA NA NA Each 50[f] Sum 1000


Jul 18, 2014 of 35

- Dibromodiphenyl ether (DiBDE) - Tribromodiphenyl ether (TriBDE) - Tetrabromodiphenyl ether (TetraBDE) - Pentabromodiphenyl ether (PentaBDE) - Hexabromodiphenyl ether (HexaBDE) - Heptabromodiphenyl ether (HeptaBDE) - Octabromodiphenyl ether (OctaBDE) - Nonabromodiphenyl ether (NonaBDE) - Decabromodiphenyl ether (DecaBDE)

NA = Not applicable

[a] Test method with reference to IEC 62321: 2008, Clause 6. [b] Test method with reference to IEC 62321: 2008, Clauses 8, 9 and 10. [c] Test method with reference to IEC 62321: 2008, Clause 7. [d] Test method with reference to IEC 62321: 2008, Annex C. [e] Test method with reference to IEC 62321: 2008, Annex B[g]. [f] Test method with reference to IEC 62321: 2008, Annex A.

[g] The principle of this method was evaluated and supported by two studies organized by IEC TC 111 WG3. These studies were focused on detecting the presence of Cr VI in the corrosion protection coatings on metallic samples.

[h]

Result(s) of Cr VI for metallic material(s) was (were) expressed in term of positive and negative. Negative means the absence of Cr VI on the tested areas and the result(s) was (were) regarded as in compliance with European Council Directive 2001/65/EU, Article 4(1). While, positive means the presence of Cr VI on tested areas and the result(s) was (were) regarded as in conflict with European Council Directive 2001/65/EU, Article 4(1).

Testing Approach [ Compliance Test for European Coun cil Directive 2011/65/EU ] :

The testing approach was with reference to the following document(s).

1 “RoHS Enforcement Guidance Document Version 1” by EU RoHS Enforcement Authorities Informal Network. (May 2006)

2 “RoHS Regulations - Government Guidance Notes” by United Kingdom Department for Business Innovation & Skills. (February 2011)

3 “Final Report to RoHS substances (Hg, Pb, Cr(VI), Cd, PBB and PBDE) in electrical and electronic equipment in Belgium” by Belgium Federal Public Service Health, Food Chain Safety and Environment. (November 2005)


Jul 18, 2014 of 35

RESULTS: Polycyclic Aromatic Hydrocarbons (PAHs) Content – § 3 0 LFGB, Chem Verbots V

Test Method : ZEK 01.4-08, solvent extraction and analysis by Gas Chromatograph Mass Spectrometer. (Testing and validation of PAHs in products in the course of GS-Mark Certification.)
















Type I

Food Contact / Mouth Contact / Toys For Children Aged Up To 3 Years; Benzo (a) pyrene: Not Detectable or less than 0.2 mg/kg All listed PAHs: Not Detectable (Sum) or less than 0.2 mg/kg (Sum)

Type II

Skin Contact Time Longer Than 30 Seconds / Toys For Children Aged Over 3 Years; Benzo (a) pyrene: 1.0 mg/kg All listed PAHs: 10 mg/kg (Sum)

Maximum Allowable Limit :

Type III

Skin Contact Time Up To 30 Seconds / Without Skin Contact; Benzo (a) pyrene: 20 mg/kg All listed PAHs: 200 mg/kg (Sum)

Result

Test Item (s) Type Detected Analyte (s) Conc. Unit

Conclusion

I001+I002+I003 II ND ND mg/kg PASS



I010+I011 II ND ND mg/kg PASS



Jul 18, 2014 of 35

RESULTS: Note / key:

ND = Not detected “>” = Greater than Conc. = Concentration mg/kg = milligram(s) per kilogram Detection Limit (mg/kg): Each PAHs: 0.2; Sum of all PAHs: 0.2

Remark:

- The list of polycyclic aromatic hydrocarbons is summarized in table of Appendix. APPENDIX:

List of Polynuclear Aromatic Hydrocarbons:

No. Name of Analytes CAS-No. No. Name of Analytes CAS-No.

1 Naphthalene 91-20-3 10 Chrysene 218-01-9

2 Acenaphthylene 208-96-8 11 Benzo (a) pyrene 50-32-8

3 Acenaphthene 83-32-9 12 Indeno (1,2,3-cd) pyrene 193-39-5

4 Fluorene 86-73-7 13 Dibenzo (a,h) anthracene 53-70-3

5 Phenanthrene 85-01-8 14 Benzo (g,h,i) perylene 191-24-2

6 Anthracene 120-12-7 15 Benzo (b) fluoranthene 205-99-2

7 Fluoranthene 206-44-0 16 Benzo (k) fluoranthene 207-08-9

8 Pyrene 129-00-0 17 Benzo (j) fluoranthen 205-82-3

9 Benzo (a) anthracene 56-55-3 18 Benzo (e) pyren 192-97-2


Jul 18, 2014 of 35

RESULTS:

END OF REPORT

(8814)176-0061

longmen getmore polyurethane co., ltd · longmen getmore polyurethane co., ltd technical report:...

Documents