lockers and cupboards - avanta uk€¦ · design makes these lockers and cupboards extremely...

PERSONAL STORAGE SOLUTIONSX

Lockers and Cupboards

your partner in storage solutionsWorkspace Creation

Call: 0800 975 4933

Deliveringthe right solution for youMoresecure lockers and cupboards are designed and manufacturedto a high specification to meet any personal storage requirements.

They are built for a long efficient working life in factories, hospitals, schools, colleges, retailoutlets - in fact anywhere needing tough, reliable and asethetic storage. Their modulardesign makes these lockers and cupboards extremely adaptable and cost effective. Units canbe specified from a wide range with a choice of locks, doors, colours and accessories,allowing lockers and cupboards to be tailored to a customers precise needs.

Our experience and expertise has enabled us to put together a proven product range,designed to conform to BS 4680 standards and manufactured in the UK to internationallyrecognised quality and environmental ISO standards. This reflects our commitment toproducing the best products whilst reducing environmental impact in the design andmanufacturing process.

Free site visit and designWe will gladly come and discuss your requirements and help you plan your lockeror cupboard needs. We will survey the room or area and produce a layout foryour approval. Installation, if required, is undertaken by our appointed fitters,who ensure your job is installed to your satisfaction with the minimum ofdisruption and mess.

Contents

Locker Features

Accessories

Full height lockers

Three-quarterheight lockers

Half height lockers

Colour Options

Door Options

Lock Options

Quarto lockers

Sixto lockers

Cube lockers

Locker RoomDesign

Utilty Lockers

Crew Lockers

Medium DutyLockers

Stronghold HeavyDuty Lockers

GarmentDispensers

Laptop Lockers

Personal ItemLockers

Post Lockers

Laminate DoorLockers

Wooden DoorLockers

AluminiumLaminate DoorLockers

Seating andBenching

Security & StandardCupboards

Slim, Large Volume,Vision and StorageCupboards

Tool Cabinets

HazardousSubstanceCupboards

12

10

9

345

16

17

18

19

20

21

22

23

15

13

14

l Our standard duty lockers have been tested and conform to the requirements of the British Standard for Clothes Lockers BS 4680: 1996 ‘Standard Duty’.

Robust Design

l All doors have an all-round reinforcing edge, spot-welded at each corner to enhance strength and rigidity.

l A welded vertical channel section stiffens the door for protection against impact damage.

l Steel three-knuckle hinges are welded to the door and riveted to the frame to give added strength and allow for easy replacement of damaged doors.

l Complying with BS 4680, a close fit between the door and the frame of less than 2mm protects against leverage in attempted forced entry.

l Colours are applied electro-staticallyas an epoxy-polyester powder coat, then baked to provide a high quality, durable finish.

Integral Security

Lockingl Features in-frame locking through

the door with a hooked cam engaging into the frame.

lThis provides extra security by significantly increasing resistance toforced entry.

Anti-theft shelfl The design of the intermediate

shelf prevents access to compartments above and below an open door.

Lock platel The lock cover plate and handle

provides recesses to accept compartment numbering or identification.

Proven Products

BioCote ® - bacteria locked outl BioCote® antimicrobial technology is

incorporated into all Moresecure lockers and cupboards at the time of manufacture, offering constant protection against a wide range of bacteria.

l Field tests prove that storage equipment treated with BioCote®

powder coating benefits from a 94% reduction in bacteria on their surface, helping create a cleaner and more hygienic working environment.

BIOCOTE®

PROTECTED

BS 4680 - the standard for clothes lockers

Locker support frames and seat unitsraise lockers off the floor, reducingimpact damage and making cleaningeasier. Support frames aremanufactured from 25mm square steeltube in a welded construction and arepainted light grey as standard tomatch the lockers. Standard height is150mm, and widths and depths aredesigned to match the lockerinstallation.

Seat units are incorporated into thelocker frame as well as slatted seats tothe front. They can include a meshshelf for footwear. Standard height is400mm to match freestanding benchseating units.

Sloping tops are essential in hygiene-sensitive locations such as hospitalsand the food industry. The 22 degreeslope prevents litter being left onlocker tops and makes cleaning easier.

Sloping Tops for lockers

Locker Depth300380450500550600

Top Height125158187207228240

Dimensions mm

Support Frame

Support Frame with seat

Bridge Unit forModular Lockers

Bridge Unit TopThis is fitted to adjacent lockerswith nuts & bolts supplied.Incorporates a central full-lengthhanging rail with the option of‘captive’ clothes hangers whichcannot be removed, therebypreventing theft and accidental loss.

Bridge Unit BaseA free-standing rack to supportfootwear or other items 150mmabove the floor.

Widths mm600900

1200

Depths mm300450500550

Height - 60mm

Accessories for tailored solutions

page 4

Widths mm225300380450

Depths mm300380450500550600

Height - 1800mm

Full Height

Internal fittings:

l One intermediate fixed shelf.

l Each compartment has a fixed garment hanging rail (except for 300mm deep).

l Each compartment has two coat hooks.

Two-Door

Pastel Door Colours

Light Grey (RAL 7035)

Light Grey (RAL 7035) Red (RAL 3020)

Blue (RAL 5002) Green (RAL 6001)

Carmine Red (RAL 3002) Yellow (RAL 1003)

Dark Grey (BS 00A11) Electric Blue (BS 20 E 51)

Black (RAL 9005)

Sunburst Yellow (BS 10 E 50) Candy Pink (BS 02 C33)

Light Violet (BS 381 C 797) Turquoise (RAL 6034)

Standard Door Colours

Colours and Finishes

Note: due to the limitations of matching painted steel to theprinting process, colours illustrated on this page offer a good,but approximate guide. For exact colour reference, paintedsteel samples are available upon request.

Standard Body colour is Light Grey (RAL 7035)

page 5

Internal fittings:

l Fixed top shelf.

l Fixed garment hanging rail (except 300mm deep).

l Two coat hooks.

Single-Door

Epoxy-polyester powder coat colours with BioCote® protection.

BioCote® Paint Finish

Widths mm225300380450

Depths mm300380450500550600

Height - 1800mm

Mild Steel Modular

Vision Door

Incorporates atoughenedpolycarbonate viewpanel set within asteel door with anall-roundstrengthened edge -allows you to seeitems stored inlockercompartmentswithoutcompromisingsecurity.

Perforated Door

Particularly usefulwhere damp clothesand odours pose aproblem.

Door OptionsYou can choose from a variety ofdoor styles to tailor the locker toyour specific situation.

Standard Duty Door

This flat mild steeldoor fits flush withinthe door frame – lessthan 2mm betweendoor and frame (forcompliance withBS 4680) to protectagainst leverage inattempted forcedentry.

LockOptions

Standard Deadlock

This simple and economicalcam lock provides useraccess with a small, easilyreplaced key. The lock issupplied with two keys anda master key is available.

Hasp & Staple Padlock Fitting

Transfers responsibilty forlocking to the user. The user isrequired to secure the lockerwith a padlock (not supplied).This system provides flexibilityat the loss of some control overallocation of lockers.

Internal fittings:

l Two intermediate fixed shelves.

Internal fittings:

l Three intermediate fixed shelves.

Internal fittings:

l Four intermediate fixed shelves.

Internal fittings:

l Five intermediate fixed shelves.

Widths mm225380450

Depths mm300380450500

Height - 1800mm

Six-DoorThree-Door Four-Door Five-Door

Widths mm225300380450

Depths mm300380450500550600

Height - 1800mm

Widths mm225300380450

Depths mm300380450500550600

Height - 1800mm

Widths mm225300380450

Depths mm300380450500550600

Height - 1800mm

lockers for maximum versatility

Insight Door

These shatterproofpolycarbonatedoors allow100% visibilitywhile maintainingthe highest levelof security.

page 6

Coin/Token Return Lock

Ideal when lockers have‘shared’ users. The key isreleased when coin (£/€) ortoken is inserted. Key is captiveagain when the door isreopened and the coin/token isreturned to the user.

Mastered Combination Lock

Provides a keyless system for asingle user. Turning thetumbler to each of the numbersettings releases the lock.Supplied with combinationnumber, instructions andoverride master key.

Digital Combination Lock

Simple-to-use, battery-operatedkeyless lock. Can beprogrammed for dedicatedsingle-user or multi-user ‘openaccess’ mode. Personal entrycode can be set and changed,whilst a preset master codeensures supervisor access.

Multi-user Combination Lock

Ideal for facilities where keys arenot desirable. The lock can bereset whenever it is open. Thisallows the locker to be used byseveral people at different timesthroughout the day, reducing thenumber of locker compartmentsrequired and the need for keys.

Magnetic Catch Lock

For use in Primary schools orenvironments where risk of keyloss is high and security minimal.Offers positive closure of the door.

Coin/Token Retain Lock

Generates revenue from‘shared’ user lockers. The keyis released when coin (£/€)or token is inserted. Key iscaptive again when the dooris reopened. Coin/token isretained in the box.

Three Quarter Height Half Height

Internal fittings:


Internal fittings:

l Compartment has a fixed garment hanging rail with two coat hooks.

Internal fittings:


Internal fittings:

l Compartment has a fixed garment hanging rail with two coat hooks.

Single-DoorSingle-Door Three-Door Two-Door

Widths mm225300380450

Depths mm300380450500550600

Height - 1382mm

Widths mm225300380450

Depths mm300380450500550600

Height - 1382mm

Widths mm225300380450

Depths mm300380450500550600

Height - 900mm

Widths mm225300380450

Depths mm300380450500550600

Height - 900mm

page 7

Internal fittings:


Three-Door

Widths mm225300380450

Depths mm300380450500550600

Height - 900mm

Quarto Sixto Cube

Widths mm225300380450

Depths mm300380450500550

Height - 511mm

Widths mm225300380450

Depths mm300380450500550

Height - 372mm

Widths mm300380450

Depths mm300380450

Heights - 300, 380or 450mm

Small Modular lockers

Quarto and Sixto lockers can be stacked, their modular designalso allowing them to be used with standard lockers

Full height lockers with Sixtolockers for additional under-seatstorage.

Quarto and Sixto lockers can befitted on top of lockers to increaseavailable storage height withadditional compartments.

Cube lockers are ideal for stacking, creatingbanks of individual compartments.

page 8

Cubes - as the namesuggests - have an equalheight, width anddepth allowingcombined stacking ofunits on the floor or onsupport frames.

Locker Room Design

Lockers are supplied as nested units - lockers of the same overall dimensions,sharing common side panels, manufactured and supplied fitted together.

This saves on the steel used, giving you the most economical solution.

Locker Nesting

Features of the locker room Requirements for usage

Initial lockerNest of 1

Nest of 2 lockers Nest of 3 lockers

The size, location, fixtures & fittings of the area or room designated for thelockers will affect the positioning and layout of the lockers. Take intoaccount the following:

l Is the room or area large enough to accommodate the number (and size) of lockers required, whilst still leaving enough space for users to have easy access?

Note: ensure that the space is not confined, making the lockers awkward or uncomfortable to use, and the room potentially hazardous in an emergency evacuation situation (in response to a fire alarm, for example).

l Is the room or area accessible to groups of people who may all arrive at one time? Are any adjacent corridors, stairs or lifts easy to get to and move through? Is the room readily accessible for delivery and installation of the lockers?

l Take into account the position of doors and windows and their effect on the locker layout.

Note: the position of fixtures and fittings which could either obstruct the lockers or be obstructed by them. For example: ceiling pillars, low ceilings, alcoves, beams, skirting boards, radiators & heating pipes, light switches, sockets and other power outlets, lighting fixtures, ventilators and air-conditioning units, any access to service points.

l Check the condition of the floor - What is it made of? Is the surface suitable and in good condition? Is it level: lockers should always be located on a level, even floor. If there is significant slope, consider locating the lockers on support frames with adjustable feet .

l How are the floors cleaned? Even in a generally ‘dry’ changing area, the floor may be washed or mopped down from time to time. Where floors may be left damp for some time and on a regular basis, consider raising the lockers from the floor on a support frame which has a protective finish against corrosion.

l Assess the lighting - ill-lit locker rooms can appear oppressive and unwelcoming. Carefully assess the positioning of lockers and their effect on lighting - avoid creating areas of dark or shadow in the room, particularly in corners. If there is natural light, make the best use of it. How is the artificial light provided? Will it conflict with the locker layout? If so, can the lighting be altered or the locker layout changed?

Consider the following at the initial planning stage:

l How many people in all have a requirement for a locker?

l Do people require their own personal locker or can the lockers be shared? - for example, to cater for shift workers

l When will the lockers be used? - are they required on a regular daily basis, or infrequently?

l Accessibility: what would be the maximum number of people requiring access to the lockers at any one time? - is additional space required to prevent overcrowding at ‘peak times’ - during the the changeover of work shifts, for example

l What kinds of items of clothing, equipment, personal possessions or carrying bags will users bring into the locker room? This will help determine the size of compartment/s required and also the locker and floor spacing - for example, where bulky clothing or equipment is involved, more floor space may be necessary for ease of movement

l What kind of access and ‘ownership’ is required for the lockers? This will influence the type of lock used: where an individual has their own locker, a cam-lock or padlock can be fitted, operated by the owner’s key; where lockers are for shared use, coin or token-operated locks may be preferred as easier to administer

l What degree of privacy is appropriate? - people may need to change their clothes, in part or in full

l Is there a requirement for seating?

l Is there a requirement for ‘shared’ clothes hanging facilities within the locker room?

Overall DimensionsWhen planning a locker room layout, allowance should also be made forthe incremental increase in the overall length of locker runs, where nestedunits are butted together. 2mm is added to the overall length at each point where two nested unitsjoin together (refer to example illustrated, below).

Locker Nesting - overall run length dimension (plan view)

Nest of 3 Nest of 3 Nest of 3 Nest of 3 Nest of 3

+ 2mm + 2mm + 2mm + 2mm

Example: run of 15 locker units, 300mm wide, in 5 nests of 3. Overall run length calculation:5 x 900mm + 8mm (4 x 2mm, nested units join at 4 points) = 4508mm overall

Locker Run SpacingLockers standing on the floor should be positioned so that there is a clearspace or aisle at least 900mm wide - but preferably 1000mm - between thelocker fronts and the opposing fixture - this could be a parallel run oflockers, or a corridor wall. Always allow clearance for wide-open doors - thisvaries according to the locker width.Where space is available, the width of the aisle can be increased up to1500mm where facing lockers are likely to be used simultaneously.

900mm min up to 1500mm

Lockers standing on support frames fitted with a seat should have aminimum aisle width of 900-1000mm between seats, but a spacing of1200mm is desirable if facing lockers are to be used simultaneously.

Internal fittings:

l Users have a three quarter length compartment with a separate full width compartment opened with the same key.l Hanging compartment has two coat hooks.

Width mm450

Depth mm450

Height - 1800mm

Internal fittings:

l Fixed top shelf.l Central divider.l Both divided compartments have a garment hanging rail and coat hook.

Width mm450

Depth mm450

Height - 1800mm

Clean & Dirty LockerInternal fittings:

l Fixed top shelf.l Central divider.l Hanging rail and hook.l Three fixed shelves.

Width mm450

Depth mm450

Height - 1800mm

Uniform Locker

Utility

Two Person Locker

Utility Lockers

page10

We also offer a variety ofPolice locker solutions. Fromthe storage of ‘Airwave’radios to PSU bags we havethe right solution for Policeforces throughout the UK.

Police

Width mm450600

Depth mm600600

Height - 1800mm

l Also available sloping tops, see page 4.l Choice of door colours, see page 5.l Fitted with Deadlock as standard. Optional locks, see page 6 for details.

Crew

Internal fittings:

l Fixed heavy-duty top shelf.l The hanging compartment has a heavy duty hanging rail.

Two compartmentInternal fittings:

l Fixed heavy duty top and lower shelves.l Divided compartments. l Heavy duty hanging rail.

Four compartmentInternal fittings:

l Top shelf, divided compartment below, with one fixed shelf and hanging rail to either side.

Width mm380

Depth mm450

Height - 1800mm

Work Wear Locker

Police Lockerwith:l Airwaves compartmentl CS Cannister holder

Police Lockerwith:l Lockable cube on door with clear perspex front

Police Lockerwith:l CS Cannister holder

Width mm600

Depth mm600

Height - 1800mm

page 11

Width mm450600

Depth mm600600

Height - 1800mm

Enhancing the already robustdesign of the Standard Dutysteel locker, the uprated mediumduty versions have an additionalvertical reinforcement channeland a shielded front of double-gauge steel for triple thicknessprotection.

This toughened design providesadditional defence against thetwin problems of vandalism andtheft.

Inner reinforcingchannel to standardduty specification

Outer reinforcing channelto medium dutyspecification

Double-gauge shielding

l Second channel section welded to the inside of the door to provide triple thickness strength.l This significantly increases the reinforced area of the door's width and height and makes the door extremely difficult to deform, providing additional protection against forced entry.l The form of the of the channel is extended across both sides of the door it doubles the gauge of the steel to resist impact damage.l Also available sloping tops, see page 4.l Choice of door colours, see page 5.l Fitted with Deadlock as standard. Optional locks, see page 6 for details.

page 12

Medium Duty Lockers

Widths mm300380450

Depths mm300380450500550600

Height - 1800mm

The medium duty design raises thestandard duty ranges to a higherlevel of protection.

Combining robust design with a heavy gauge‘double skin’ door to guard against leverage andimpact, Stronghold lockers are hard to beat whenit comes to long-lasting security.

Strengthened doorconstructed fromheavy gauge steelreinforced at top andbase

Right-angled doorflangeto guardagainstleverage

Additionalbox-section

Wrap-around securesection located behind thefull length of the door framewhen closed, protectingagainst forced entry

Tough paintfinish protectsand resistscorrosion andwear. Pre-phosphated,then powdercoated

l Heavy-duty 5-knuckle hinge welded to the door, but rivetted to the frame to allow for easy replacement.l Single compartment lockers, fitted with hat shelf and hanging rail with double coat hook as standard.l Two compartment lockers have double coat hook in each compartment.l Choice of door colours, see page 5.l Fitted with Deadlock as standard. Optional locks. Hasp & staple fitting (for use with own padlock). Coin/token operated locks. See page 6 for details.

page 13

Single Door

Two Door Three Door Four Door Six Door

Width mm305

Depths mm305457

Height - 1778mm

Stronghold Heavy Duty Lockers

10-Door Dispenser15-Door Dispenser

Designed initially for work wear, these lockersare equally suitable for the controlled issue ofsafety equipment, consumables or specificmaterials required for a working day or shift.

Individual Access

Garment issue lockers provide each workerwith key access to their secure compartment tocollect a freshly laundered issue of clothing.Compartment doors are inset within the mainfull-height door, which remains locked.

Convenient Re-supply

The full-height main door allows access to allof the individual compartments for re-stockingwith laundered clothing.

Laundry Collection

Workers ‘post’ their used garments into anadjacent Collection locker. These arecollected in a laundry bag (not suppliedwith lockers). This separation of cleanand used items can make a majorcontribution to maintaining ahygienic working environment.

The managed issue of workplace clothing - often via thirdparty laundries - is an essential part of hygiene procedure inmany sectors. Integral BioCote protection (see page 3) onall our garment issue lockers provides a valuable additionalbenefit to these industries.

5-Door Collector &Dispenser

l Half-height upper ‘issue’ doorwith 5 compartments.

l Lower ‘collector’ door with ‘post slot’.

l Hooks for laundry collection sack (sack not included).

Width mm381

Depth mm457

Height - 1778mm

Garment Dispensers and Collectors

5-Door Dispenser 20-Door Dispenser

l Also available sloping tops, see page 4.l Choice of door colours, see page 5.l Fitted with Deadlock, with 2 keys.

Collector

l Full-height door.

l Galvanised anti-theft shelf, angled inside ‘post slot’.

l Hooks for laundry collection sack (sack not included).

l 15 compartment locker has each door reinforced fitted with its own key-operated cam lock (‘dead locking’).l Single door locker version allows access to all compartments under one key.l 15 compartment lockers accept laptops WITHOUT carry cases.l Laptop lockers are available with optional hardwiring for power and networking, allowing computers to be recharged while being stored.l Also available sloping tops, see page 4.l Choice of door colours, see page 5.l Fitted with Deadlock as standard. Optional locks. Hasp & staple fitting (for use with own padlock) Digital combination lock (4 door only). Coin return lock (4 door only). See page 6 for details.

Fifteen-Door LockerCompartment sizel 90h x 285w x 425d mm

Single-Door LockerCompartment sizel 90h x 285w x 425d mm

Width mm381

Depth mm457

Height - 1778mm

Width mm381

Depth mm457

Height - 1778mm

These purpose-designed locker unitsprovide a safe sanctuary for laptops andreal peace of mind for users.

Personal item lockers provide secure storage forsmall but valuable possessions in public areasand throughout the working environment.

Perforated Door Plain Door

Also available, optional factoryfitted, full-height protective steel channel kit to cover all locks. Requires padlock.

Width mm250

Depth mm155

Height - 915mm*

Personal Item Lockers

l Allows sorted mail to be posted into secure compartments which are opened on the recipients key.l 10 or 15 tier lockers.l Individual doors are set within a main door, which is opened on its own key giving access to all of the interior.l Choice of door colours, see page 5.l Fitted with Deadlock, with 2 keys.

Post Lockers

Laptop Lockers

*Height rises to 975mmwith sloping top.

page 15

Width mm381

Depth mm457

Height - 1800mm

l Choose from 4 or 8 doors in nests of 1 or 2.l Units can be hung on walls, fitted on top of each other or side to side.l Choice of door colours, see page 5.l Fitted with Deadlock as standard. Optional locks. Hasp & staple fitting (for use with own padlock). Digital combination lock (4 door only). Coin return lock (4 door only). See page 6 for details.

Combines the versatility of steel lockers withthe durability of solid grade laminate doors.

Plant-On Door Inset Door

Two Door Locker withPlant-On Doorsl Two compartment lockers fitted with double coat hook in each compartment.

Three Door Locker withInset Doors & Sloping Top

Four Door Lockerwith Inset Doors

page 16

Depths mm300450500550600

Height - 1800mm

Laminate Door Lockers

l Solid grade laminate material offers a robust, elegant solution with a range of colours and material designs, to satisfy all requirements.l Choice of door styles.l Plant-on doors cover the front face of the locker carcase creating a wall of colour.l Inset doors offer a full-length hinge to provide continuous support for the door and provides a visual contrast between the door finish and the locker frame.l Fitted with Deadlock as standard. Optional locks. Digital combination lock. Coin/token operated locks. See page 6 for details.

Widths mm225300380450

Wooden Door Lockerscombine the strength anddurability of steel lockers withthe aesthetic appearance ofwooden lockers.

Wooden door lockers provide aneconomical alternative to all woodenfacilities, providing a clean, professionalfinished line presenting an all wood front.Matching end panels ensure the finishedinstallation has a quality ‘all wood’ effect.

l Attractive profiled doors.l Concealed self closing hinges.l Fitted with Deadlock as standard. Optional locks. Digital combination lock. Padlock fitting. Coin/token operated locks. See page 6 for details.

Wooden Door Lockers

Beech Oak

Wild Cherry European Wild Apple

Wood Grain Finish

White

Sand

Black

Melon Yellow

Gold Yellow

Poppy Red

SpeckledAquamarine

Aqua Blue

Aqua Marine Powder Blue

Mid Grey

As standard we provide laminatedoors using Trespa® Athlonmaterial in the following colours.

Standard SolidGrade Laminate

SpeckledWhite

SpeckledSand

SpeckledSilver Grey

SpeckledPowder Blue

Flat Door Finish

Speckled Door FinishWidth mm

300380

Depths mm450

Height - 1800mm

Internal fittings:

l Three intermediate fixed shelves.

Four-DoorInternal fittings:


l Each compartment has a fixed garment hanging rail.

l Each compartment has two coat hooks.

Two-DoorInternal fittings:

l Fixed top shelf.

l Fixed garment hanging rail (except 300mm deep).

l Two coat hooks.

Single-Door

page 17

MFC Wood Grain Finishes

Beech Light Oak Birch

Maple Ash Cherry

Withstanding humid atmospheres, theselockers have a superb finish to suit anyarchitectural design.

l Lockers have clean lines and continuous colour across the changing area. l 1800mm lockers available as 1, 2, 4 or 2 door above 2 quarter height doors and visa versa.l 900mm high lockers available as 1 or 2 doors.l Concealed hinges bolted to doors and frames.l Single-piece body for easy internal cleaning and snag-free storage of clothes and personal belongings.l Robust aluminium shelves riveted through the body for additional strength. l 95O custom-designed hinge.l Maximum clear access into locker width due to the compact design of frame uprights.l Gentle integral return spring on doors to avoid trapping hands or fingers; Doors have rounded, bull nose safe edges.l Integral double coat hook and hanging rail.l Choice of finishes, see page 17.l Fitted with Deadlock as standard. Optional locks. Digital combination lock. Coin/token operated locks. See page 6 for details.

Lockers are designed to provide cost-effective ‘wet-area’ personal storagesolutions in leisure and sports facilities.

Widths mm300380

Depths mm450500

Height - 900 or 1800mm

Aluminium Laminate Door Lockers

Seat units are incorporated intothe locker frame as well as slattedseats to the front. They can alsoinclude a mesh shelf for footwear.Seats are a standard depth of 300,400 or 450mm and standard heightis 400mm to match freestandingbench seating units.

Support Frame with Seat

Bench seating and accessories

An essential element of all changing facilities, our bench andseating range is available to meet all your needs from mild orstainless steel frames to solid wood, composite or solid gradelaminate slats.

You can choose from:

l Free-standing benches

l Wall-mounted back rest and clothes hook boards

l Single or double-sided free standing seat units with back rest & hook board

l Cantilever wall bench

l Locker support frames with integral seating

page 19

Seating & Benching

Cupboards meet the stringent requirements ofBS EN 14073:2004 (Parts 1, 2 & 3) and BS EN14074:2004. Cupboards feature:

l Door vertical stiffening for added strength l Adjustable shelves on a 25mm vertical pitchl Shelves carry a maximum of 78kg UDLl Choice of door colours, see page 5

Handle designed for easieroperation, allows door closingwithout the key

Three point locking as standard

Where valuable and potentially vulnerable materials or equipment are usedin the workplace, the need for storage equipment with enhanced securitybecomes a necessity. Security cupboards benefit from an additional hasp and staple fitting for use with a padlock (not supplied) as well as the standard 3 point locking.

Internal LayoutsStandard, Security, Slimline, LargeVolume and Vision cupboards are allavailable in the internal configurationsshown right. These offer a range ofsolutions to meet the need for securestorage around the workplace.

A versatile and robust range ofsteel cupboards providing securestorage in the workplace.

page 20

Width mm915

Depth mm505


Security Cupboards

Width mm915

Depth mm505


Standard Cupboards

S12S12 S13 S14

S00 S01 S02

With the same all-steel design and features of standard cupboards,Slimlines are available with various internal configurations.

l Door vertical stiffening for added strength l Adjustable shelves on a 25mm vertical pitchl Shelves carry a maximum of 78kg UDLl Choice of door colours, see page 5

The practical solution where storage space is limitedSlimline cupboards provide secure storage in a compact‘footprint’.

Large Volume Cupboards are available with various internal configurationsand feature the following

l Semi-concealed hingesl Magnetic door catchesl Door vertical stiffening for added strength l High quality lock operating 3-point locking bars l Shelves supported on clips, height adjustable on 25mm incrementsl Robust, all-steel constructionl Choice of door colours, see page 5

Spacious storage of larger items in the workplace

Slimline Cupboards

Large Volume Cupboards

page 21

Width mm615

Depth mm505

Height -1820mm

Width mm1220

Depth mm457

Height -1829mm

Large Volume Cupboards have ahigh quality metal lock operationthe 3 point locing system

S20 S21 S22 S25

S08 S09 S10 S11

Lockers provide visible but secure storagesuitable for most working environments tostore tools, computer periperals, electroniccomponents and high value items.

Vision Cupboards

Based on the standard all-steel cupboards, with the additionof toughened polycarbonate view panels set within a steeldoor which has an all-round strengthened edge.l Semi-concealed hingesl Magnetic door catchesl High quality lock operating 3-point locking bars l Shelves supported on clips, height adjustable on

25mm incrementsl Robust, all-steel constructionl Choice of door colours, see page 5

Width mm915

Depth mm505

Height - 1820mm

Width mm915

Depth mm505

Height - 984mm

Storage Cupboards

Width mm915

Depth mm505

Height - 984mm

Width mm450

Depth mm300

Height - 684mm

l Ronis deadlock operating single point locking

l 1 adjustable shelf

l 3 point lockingl 2 adjustable shelves

Width mm480

Depth mm505

Height - 984mm

l 3 point lockingl 2 adjustable shelves

A useful range of smaller, practically sizedlow cupboards designed for generalstorage uses.

l Door vertical stiffening for added strength l Adjustable shelves on a 25mm vertical pitchl Shelves carry a maximum of 78kg UDLl Choice of BioCote door colours,

see page 5

page 21

Handle designed for easieroperation, allows doorclosing without the key.

Versatile tool cabinets in four overall sizes with variouscombinations of painted drawers and galvanised shelves.

All cabinets feature a secure barrel lock, operating a 3-point locking system.

l Door has vertical stiffening for added strength.l Choice of door colours, see page 5.

Tool Cabinets

page 22

Width mm915

Depth mm505

Height - 1820mm

Width mm915

Depth mm505

Height - 984mm

l 2 drawers, 2 shelvesC1661TGU--29S35

l 7 drawers, 1 shelfC1661TGU--29S41

l 4 shelvesC1661TGU--29S31


l 8 shelvesC1961TGU--29S32



l 1 drawer, 1 shelfCH661TGU--29S33

l 1 drawer, 2 shelvesCH661TGU--29S34

l 2 drawers, 1 shelfCH661TGU--29S45

l 2 shelvesCH661TGU--29S30

l 6 drawersCH661TGU--29S39

l 8 drawersCH661TGU--29S42

l 4 drawers, 1shelfCH961TGU--29S37

l 2 drawers, 4 shelvesCH961TGU--29S36

l 8 drawers, 2 shelvesCH961TGU--29S43

Width mm480

Depth mm505

Height - 984mmWidth mm

480Depth mm

505

Height - 1820mm

Extension drawers 90mm high with 25kgload capacity (evenly distributed). Safetystop allows extension up to 80%. Height adjustable in 25mm increments.

Rubber mat fitted to topof all low cabinets.

Optional desk unit isavailable for low singlecabinets.

Mobile chassis for use withlow cabinets.

Shelves adjustable in 25mm increments.Safety stop allows extension up to 80%.

Provide a secure facility for materials which are requiredto be stored when not in use. Supplied with appropriate safety labelling, the highly visible yellow colour alsoensures awareness of the potential danger of the materials stored and makeslocation in the workplace easy.

l Epoxy powder coating in high-visibility yellow RAL 1003l Safety labelling in accordance with BS 5378l Pull-out shelves, height-adjustable to accommodate stored material l Perforated shelves to allow drainage into the sumpl Door vertical stiffening for added strengthl Sturdy all-steel construction

HazardousSubstance Cupboards

page 23

Width mm300

Depth mm300

Height - 684mm


CA221HYDYD00S11

Width mm915

Depth mm505

Height - 704mm


CA961HYDYD29S11

Width mm915

Depth mm355

Height - 704mm


CA931HYDYD29S11

Width mm450

Depth mm450

Height - 684mm


CA551HYDYD00S11

Width mm450

Depth mm300

Height - 511mm

l Ronis deadlock with l No shelf

CQ521HYDYD00S00

Width mm915

Depth mm505

Height - 1820mm

l 3 adjustable shelfC1961HYDYD29S13

Width mm480

Depth mm505

Height - 1820mm

l 3 adjustable shelfC1661HYDYD29S13

Width mm915

Depth mm505

Height - 984mm

l 1 adjustable shelfCH961HYDYD29S11

Width mm480

Depth mm505

Height - 984mm

l 1 adjustable shelfCH661HYDYD29S11

Width mm450

Depth mm300

Height - 684mm

l 1 adjustable shelfCA521HYDYD00S11

Handle designed for easieroperation, allows door

closing without the key

3-point lockingas standard

Seam weldedremovable sump with

carry handles

Ranges are based on the sizes and construction of the hazardous substance storagecabinets. Colours indicate the type of material stored for quick identification withinthe workplace.

We also provide a range of cupboards for the storage of:

l Agrochemicals and pesticides

l Acid or alkaline chemicals

l COSHH materials

l Personal Protection Equipment

Member Company Member CompanyCertificate No. FM 09409

For further information on Moresecure products, please contact your local distributor:

Pallet racking Two-tier shelving Heavy duty shelving

Mobile shelving Mezzanine floors Industrial shelving

Stockroom shelving Small parts storage Square tube

Workspace Creation

Avanta UK Ltd • Unit B1 • Astra Park • Parkside Lane • Leeds • West Yorkshire • LS11 5SZ

Mezzanine Floors Steel Partitions Pallet Racking Shelving Systems Workplace Equipment Office Interiors

Tel: 0800 975 4933Email: [email protected] Web: www.avantauk.com

lockers and cupboards - avanta uk€¦ · design makes these lockers and cupboards extremely...

Documents