loading the trays
TRANSCRIPT
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
1Printing
www.lexmark.com
Lexmark W820
Loading trays 1, 2, and 3For suggestions on avoiding jams, see Avoiding jams. See Print media source, size, andcapacity specifications for tray capacities.
1 Pull the tray open until it stops.
Handhold
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
2Printing
www.lexmark.com
Lexmark W820
2 Press down on the lever on the back guide and slide the back guide toward the backof the printer.
3 Lift the side guide up slightly and slide it to the right.
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
3Printing
www.lexmark.com
Lexmark W820
Note: Labels with print media size names are located on the bottom surface ofthe tray.
Each major indicator on the labels is marked with a number or paper-size name.
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
4Printing
www.lexmark.com
Lexmark W820
4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold orcrease the print media. Straighten the edges of the stack on a level surface.
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
5Printing
www.lexmark.com
Lexmark W820
5 Orient the stack of print media correctly for the size you are loading. Refer to the iconson the front inside surface of the tray.
Note: Do not exceed the maximum stack height indicated by the label on theback guide. Overfilling the tray may cause paper jams. Do not load bent orwrinkled print media.
Maximumstack heightindicator
Orientationicons
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
6Printing
www.lexmark.com
Lexmark W820
6 Place the print media against the front left corner of the tray.
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
7Printing
www.lexmark.com
Lexmark W820
7 Press down on the lever on the back guide, and then slide the back guide toward thefront of the tray until it lightly touches the stack of print media.
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
8Printing
www.lexmark.com
Lexmark W820
8 Lift the side guide up slightly and slide it to the left until it lightly touches the side of theprint media. Make sure the guide locks into place in one of the detents at the bottomof the tray.
Note: To install a paper-size label in the paper-size indicator window, refer to theSetup Guide.
Paper-sizeindicator labelgoes in this slot
Paper-sizeindicator window
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
9Printing
www.lexmark.com
Lexmark W820
9 Slide the tray all the way into the printer.
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
10Printing
www.lexmark.com
Lexmark W820
Loading trays 4 and 5Load trays 4 and 5 in the optional high capacity feeder in the same way. See Print mediasource, size, and capacity specifications for tray capacities.
Note: Do not load any print media other than paper in trays 4 and 5.
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
11Printing
www.lexmark.com
Lexmark W820
1 Pull the tray toward you.
2 Slide the guide to the rear of the tray.
Markings on the bottom of the tray indicate paper sizes.
Markings
Handhold
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
12Printing
www.lexmark.com
Lexmark W820
3 Flex the sheets back and forth to loosen them, and then fan them. Do not fold orcrease the print media. Straighten the edges of the stack on a level surface.
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
13Printing
www.lexmark.com
Lexmark W820
4 Orient the stack of print media correctly for the size and type you are loading. Refer tothe icons on the tray.
Note: Do not exceed the maximum stack height indicated on the guide.Overfilling the tray may cause paper jams. Do not load bent or wrinkledprint media.
Orientation icons
Maximumstackheightindicator
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
14Printing
www.lexmark.com
Lexmark W820
5 Place the print media against the front left corner of the tray.
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
15Printing
www.lexmark.com
Lexmark W820
6 Slide the guide forward until it lightly touches the stack of print media.
7 Gently push on the right side of the stack to make it even.
Note: To attach a paper-size sticker on trays 4 and 5, refer to the Setup Guide
Paper-size sticker
Loading the trays
Paper handling
Maintenance
Troubleshooting
Administration
Index
16Printing
www.lexmark.com
Lexmark W820
8 Slide the tray all the way into the printer. �