loader attachments skidsteer attachments snow blades ... · loader attachments skidsteer...
TRANSCRIPT
1-800-698-5510www.martatch.com
LOADER ATTACHMENTS
SKIDSTEER ATTACHMENTS
SNOW BLADES
CUSTOM MADE ATTACHMENTS TO fIT ANy LOADER
OR SKID STEER
PRODUCT INDEXATTACHMENTS Page
Buckets 2-3
Bale Spears 4
Manure Forks 5
Stone Forks 5
Grapples 6-7
Pallet Forks 8-9
Logging Equipment 10-11
Lift Boom 11
Rotary Cutter 11 Gardening 12
Industrial 13
SNOWBLADES
Snowblades 14-18
1-800-698-5510 1
CUsTOm maDE aTTaChmENTs TO fIT aNy lOaDER OR
skID sTEER.
FEATURES• ¼” material used for body• hardened side cutting edge for longer wear life• ¾” x 6” hardened cutting edge• trailer hitch for front towing available• will custom fabricate to any size or specifications• skidsteer bucket shown
skIDsTEER / lOaDER BUCkET
MARTATCH buckets, and all other attachments, are built with the end user in mind. With our roots as farmers, we know the abuse, and wear and tear, that attachments need to go through to get the job done. Each attachment is reinforced and gussetted to make it strong and durable for years after purchase.Attachments are stocked for fast turn arounds but custom pieces are built constantly as well.
Give us a call at 1-800-698-5510 for your needs today.
BUCKETS
1-800-698-5510www.martatch.com2
PRODUCT
FEATURES• Increases height of dump• piles manure higher in your storage
hIgh DUmP BUCkET
skIDsTEER / lOaDER BUCkETs
FEATURES• ¼” material used for body• inside gussets for more strength• hardened side cutting edge for
longer wear life• ¾” x 6” hardened cutting edge• trailer hitch for front towing available• will custom fabricate to any size or specifications• (loader bucket shown)
lOaDER, hEavy DUTy, hIgh vOlUmE, BUCkET
BUCKETS
1-800-698-5510 3
GUIDE
lOaDER BUCkET wITh TOP gUaRD
FEATURES• ¼” material used for body• inside gussets for more strength• hardened side cutting edge for
longer wear life• ¾” x 6” hardened cutting edge• top guard for bigger loads• trailer hitch for front towing available• will custom fabricate to any size or specifications
FEATURES• extreme duty teeth • hardened side wear plates• pointed side for better penetration
hEavy DUTy TOOTh BUCkET
FEATURES• bucket floors are
constructed with AR400 Steel• extra heavy duty construction for
high capacity work loads• OPTIONAL: grill to prevent overflow
TElEhaNDlER & whEEl lOaDER BUCkET
Standard
High Volume
Hitch
Chain Hookis inside bucket to
prevent chain snap-ping at operator
SkidsteerBucketSteps
Ice Scraper AttachmentThe ice scraper easily
attaches and detaches with a single hitch pin
FEATURES• standard 3-point hitch mounts • 46” wide frames (30” tine spacing)• available with any amount of tines to
suit your needs• 32”, 39”, and 49” spear lengths
COmPaCT UTIlITy BalE sPEaR
3-POINT hITCh BalE sPEaR
BALE SPEARS
FEATURES• top safety frames are removable for higher
stacking capabilites under truss and low buildings• safety frames easily remove without tools• available in 26” and 36” high• see through backplate for better visibility at
truck level• 32”, 39”, and 49” spear lengths
• 46” wide frames (30” tine spacing)• available with any amount of tines to suit
your needs
safETy fRamE BalE sPEaR
1-800-698-5510www.martatch.com4
PRODUCT
laRgE, hEavy DUTy, BalE sPEaRwith hydraulic Bale release Pusher
FEATURES• safety frames can be easily removed • light duty bale spears • economical pricing • 20-40 hp tractors and skid steers • light weight to maximize the lifting
capacity of the machine
FEATURES• designed to carry 3 or 4 large
square bales• hydraulic pusher to release bales
from tines• top frame can be removed for handling
bales in low buildings• safety support to prevent bale fork from
tipping when not in use. Folds up when not in use.
• 25” tine spacing• 60” W x 54” H main frame dimensions• 60” W x 79” H total frame with extension• hydraulic hoses included• quick couplers sold separately
Safety Stand Vertical ExtensionNo Hydraulic Option
FEATURES• 36” Conus I cranked tines at 8” centers• 31” useable length• from 42” to 108” widths• available in skidsteer and loader profiles• optional: 32” cranked tines with 26” useable length• original kverneland tines
maNURE fORk
FEATURES• an economical choice with 2 tools in one attachment• pallet fork tines easily remove without tools• bale spear tines easily remove without tools• safety frames easily remove without tools
• 48” bale spear tines• 42” and 48” pallet fork tines
• pallet fork tines adjustable for width• standard class II forklift forks
Easy removal of safety frames. No tools needed!
Forks, tines and safety frames are
easily removed without tools.
hEavy DUTy PallET fORk BalE sPEaR COmBO
MANURE / STONE FORKS
1-800-698-5510 5
REgUlaR sTylE sTONE fORkFEATURES• 39” Conus II cranked tines at
4” centers• 32” useable length• available from 54” to 108”
widths• see through back for better
visibility• original kverneland tines• performs well in loose ground or pasture land
FEATURES• 40” useable length tines at 3” centers• plasma cut for strength and durability• points are reinforced with
cross bar• performs well in loose
ground• available from 54” to 108”
RETaINER sTylE sTONE fORk
GUIDE
FEATURES• handles it all: gravel, logs, garbage, large bales,
manure, brush, cement - the list is endless• 2 hydraulic grabbers work independently to
hold uneven loads• hardened cutting edge
• an all purpose tool, to turn your skidsteer into a multi-purpose machine without changing bits
• available from 48” to 96”
FEATURES• opens to 72” - handy for large
bails • able to grab and move
almost anything you can think of
• extra heavy duty construction with AR400 materal
• Handles the most rugged jobs
BUCkET gRaPPlE
TElEhaNDlER & whEEl lOaDER gRaPPlE
Features• available from 60” to 108”• useful for stones and heavy debris etc.• can be fitted on any front end loader or skidsteer• 39” conus II cranked tines
34” useable length at 4” centers• original kverneland tines
sTONE fORk gRaPPlE
maNURE / UTIlITy gRaPPlEFEATURES• available from 60” to 108”• useful for large bales, manure, debris,
logs, stones etc.• can be fitted on any front end loader
or skidsteer• 36” conus I cranked tines
31” useable length at 8” centersOptiOnal: 32” cranked tines, 26” useable at 8” centers• original kverneland tines
Handling odd materials throws a challenging curve ball every time. With Martatch’s grapple buckets and forks you won’t be stumped when the worst comes along. From inside the cab you can scoop, dig, and grab materials such as large rocks, branches, debris etc. and move them to a different location within minutes. Neglected cleanup jobs will disappear in front of you while you operate a grapple without ever getting out of your seat!
GRAPPLES
1-800-698-5510www.martatch.com6
PRODUCT
GRAPPLES
PallET fORk gRaPPlEFEATURES• excellent for logging and fence posts• available with adjustable forks 42” to 60” long• 7500 lbs. lifting capacity• hydraulic clamping arms clamp
independently to clamp uneven loads• can be used for lifting skidsOptiOnal: fence unroller will adapt to the side
of the grapple pallet forks
DEBRIs gRaPPlE 37”
DEBRIs gRaPPlE 27”
ROOT RakE gRaPPlE
FEATURES• shown is 37” tines• 69” to 106” widths• 5½” opening between tines• 48” grapple opening• heavy duty ¾” plasma cut material• available in single or double grapple• hoses included• 27” tines grapple available
FEATURES• 27” tines• 69” to 106” widths• 5½” opening between tines• 39” grapple opening• heavy duty ¾” plasma cut material• available in single or double grapple• hoses included
FEATURES• 48” to 80” widths• plasma cut ½” AR400 high
tensile teeth• teeth spaced at 8” centers• available in 30” height,
single grapple• available in 36” height,
double grapple• hoses included
PallET fORk - sINglE aRm gRaPPlE
FEATURES• excellent for laying landscape stones• 7500 lbs. lifting capacity• can be used for lifting skids
1-800-698-5510 7
GUIDE
PALLET FORKS
Pallet forks can make handling your skidded materials much easier and safer. Martatch offers you different options when you need to buy a pallet fork. This way you can get the perfect match to your loader or skidsteer, and the application, for the best cost. Contact us for more information on our pallet forks. Don’t settle for less!
hEavy DUTy PallET fORk / BalE sPEaR COmBO
1-800-698-5510www.martatch.com8
PRODUCT
FEATURES• an economical choice with 2 tools in one
attachment• pallet fork, bale spear tines and safety
frames easily remove without tools• 48” bale spear tines
• 42” and 48” pallet fork tines• pallet fork tines adjustable for width
• standard class II forklift forks
PALLET FORKS
hEavy DUTy fORk
REgUlaR DUTy PallET fORk
lIghT DUTy PallET fORk
FEATURES• 3700 lbs. capacity - 50” frame• tines adjustable for width• 36” , 42”, and 48” fork lengths• standard class II forklift forks• see through back plate for ease of
pallet insertion at truck level• anti-slip step• 1¼” thick x 4” wide forks
FEATURES• 5500 lbs. capacity - 50” frame• tines adjustable for width• 36” , 42”, and 48” fork lengths• standard class II forklift forks• see through back plate for ease of
pallet insertion at truck level• anti-slip step• 1½” thick x 4” wide forks
FEATURES• 7500 lbs. capacity - 46” frame• tines adjustable for width• 36” , 42”, and 48” fork lengths• standard class II forklift forks• see through back plate for ease of
pallet insertion at truck level• anti-slip step• 1¾” thick x 4” wide forks
FEATURES• standard 3-point hitch mounts • tines adjustable for width• 36” , 42”, and 48” fork lengths• standard class II forklift forks
3-POINT hITCh PallET fORk
Pallet Fork extensionsavailable from 54” to 96”
PallET fORk EXTENsIONs
1-800-698-5510 9
GUIDE
lOg gRaPPlE
FEATURES• 40 - 80 hp and 80 - 100 hp models available• grabs up to 30” logs• chain swivel• clamps on the main frame to keep grapple
from swinging when driving over rough terrrain
• extra heavy duty construction• front jaws to grab hanging trees to back drag• grabs logs on one end for easy
piling (shown above)OptiOnal:• hydraulic winch with 165’ 3/8” cable• 8000 lb. pulling capacity at 25 gal/min
and 2700 lb. pressure• 15 metres/min line speed• free spooling
LOGGING EqUIPMENT
hyDRaUlIC wINCh
FEATURES• will handle any job from logging to
dead stock removal• hydraulic 8000 lbs. free
spooling winch.• 165’ by 3/8” logging cable at 15
metres/min line speed• 25 gal/min/2700 lbs. hydraulic
pressure• self anchoring plate• brush removal blade
1-800-698-5510www.martatch.com10
PRODUCT
maRTaTCh PRODUCTs aRE BUIlT TO lasT!
LOGGING EqUIPMENT
ROTaRy CUTTER
lIfT BOOm
FEATURES• adjustable boom length• pintle hook on end• adjustable from 48” to 78”• extended capacity 1500 lbs.
1-800-698-5510 11
FEATURES• available in 60”, 72” and 84” for 30 to 100 hp• high flow not needed• lateral float & side shift• adjustable side slides• hardened cutting blades• hydraulic motor 30 hp @ 20 gal/min with
40 hp gearbox• can be fitted on any front end loader
or skidsteer• easily adjusts without tools for
cutting along ditches, fences etc.• safety chain guardOptiOnal: available with
front caster
GUIDE
flaIl mOwER
• available in 60”- 96” widths • high flow not needed • vertical float • hydraulic motor 30 hp - approx. 17–25 gallons / minute • adjustable side sliders
lOaDER mOUNT sPRayER
FEATURES• Front mount or 3 pt hitch• 10’ fold away booms• Hand gun sprayer• 15 - 60 gallon tanks available• Fold away booms up to
30’ available
fERTIlIzER sPREaDER
hyDRaUlIC aRm ROTaRy CUTTER
ROTOTIllER
FEATURES• spreads fertilizer, salt, sand and seed• front mount or 3 pt hitch mount• hydraulic or PTO driven• available from 100 L to 500 L capacity
FEATURES• designed for mowing on uneven terrain along roadsides and laneways, etc.• available from 54” - 66” wide• front castor is standard to ensure even travel on uneven terrain
FEATURES• front mount or 3 pt hitch• hydraulic or PTO driven• 40” to 90” wide available
LANDSCAPING
1-800-698-5510www.martatch.com12
PRODUCT
TRaIlER hITCh aDaPTER
ROTaTINg hyDRaUlIC BROOm
hyDRaUlIC aNglE BROOmFEATURES• excellent for snow cleanup,
sweeping feed alley ways, outside yards
• does an excellent job without creating dust
• hydraulic adjustable angle
FEATURES• trailer hitch adapter for front end skid
steer or loader• move ball hitch trailers easily with your
front end loader or skid steer• 4 way variable size ball or hook hitch
FEATURES• Angles both ways (manually
with pin)• Sweeps forward or reverse
into bucket• Dump swept-up debris by
tripping bucket manually• After dumping, bucket will
latch into place when sitting on floor
• Uses hydraulic motor to spin broom
3 PT hITCh aDaPTER
FEATURES• Hookup to any 3 pt hitch equipment
with skidsteer or tractor
LANDSCAPING
1-800-698-5510 13
GUIDE
Snow removal with large tractors and blades is a growing market due to large parking lots needing to be cleared with minimal delay to businesses. Increase your efficiency and control with a Martatch hydraulic end wing blade, or one of our heavy duty snow pushers. Whatever the application, Martatch can suit you up with the best of both worlds.
FEATURES:• spring trip cutting edge • lateral float• cross-over relief valve protection• hydraulic angle 30 degrees both ways• adjustable skid shoes• reversible cutting edge for longer wear life
AVAILABLE IN:• 24” high - 60” - 96” wide - 30-50 hp• 30” high - 72” - 108” wide - 30-80 hp• 34” high - 108” - 168” wide c/w double cylinder - 60-120 hp• 42” high - 144” - 192” wide c/w double cylinder - 90-200 hp extra heavy duty construction
hEavy DUTy hyDRaUlIC aNglE sNOw BlaDEs
SNOw BLADES
1-800-698-5510www.martatch.com14
PRODUCT
FEATURES:• spring trip mouldboard • lateral float• cross-over relief valve protection• hydraulic angle 30 degrees both ways• adjustable skid shoes• reversible cutting edge for longer
wear life
AVAILABLE IN:• 20” high mouldboard• from 54” to 72” widths• made to fit any loader• for 20 - 35 hp. range• available with undercarriage mount
The true name of Martatch’s compact tractor snowblades is - convenience. Now you don’t have to spend your whole morning shoveling your driveway only to have it snow again later that day. With a Martatch snow blade on the front of your compact, you can have your’s, and the neighbour’s driveway clean before your coffee is done. Look no further!
SNOw BLADES
1-800-698-5510 15
PURE CONVENIENCE!
hyDRaUlIC aNglE COmPaCT sNOw BlaDEs
GUIDE
Martatch Snow-pushers are strictly designed for the contractor / farmer that needs the best solution for a bare-bones price. Snow-pushers are built with loader attachments specifically to your request or with a bucket attachment. You can convert your loader tractor or wheel loader to a snow removal machine in minutes for a low cost. Most buckets will simply slide into the sleeves at the back of the snow pushers while chains securely hold the pusher onto your bucket. This is definitely your best bet for a simple conversion where versatility is important.
FEATURES:• AR 400 material - replaceable skid shoes• adjustable skid shoes• spring trip cutting edgeOptiOnal: spring trip end plates• lateral float
AVAILABLE IN:• 30” high - 96” wide - 30-50 hp• 34” high - 120” wide - 40-90 hp• 38” high - 168” wide - 80-120 hp• made to fit any loader or bucket
REgUlaR DUTy sNOw PUshERs
SNOw PUShERS
1-800-698-5510www.martatch.com16
PRODUCT
FEATURES:• AR 400 material - replaceable skid shoes• adjustable skid shoes• spring trip cutting edgeOptiOnal: spring trip end plates• lateral float
AVAILABLE IN:• 42” high - 144” - 192” wide - 110-150 hp• 48” high - 144” - 192” wide - 150-200 hp• extra heavy duty construction designed for 150-200 hp wheel loaders• made to fit any loader or bucket
CONvERT yOUR lOaDER TRaCTOR OR whEEl lOaDER
TO a sNOw REmOval maChINE IN mINUTEs
SNOw PUShERS
hEavy DUTy sNOw PUshERs
1-800-698-5510 17
GUIDE
SNOw BLADES
sUPER hEavy DUTy sNOw-PUshERs
1-800-698-5510www.martatch.com18
The Martatch SNOW BRUTE snow pusher is a beefed up version of the Heavy Duty Snow Pusher for 150 - 200 HP machines. Built with heavier material and more strength, this is one serious contender in the snow pusher market. One seriously heavy duty snow pusher for serious snow pushers.
FEATURES:• AR 400 material - replaceable
skid shoes• adjustable skid shoes• spring trip cutting edgeOptiOnal: spring trip end plates• lateral float
AVAILABLE IN:• 42” high - 144” - 192” wide - 110-150 hp• 48” high - 144” - 192” wide - 150-200 hp• extra heavy duty construction designed for 150-200 hp wheel loaders• made to fit any loader or bucket
PRODUCT
SNOw BLADES
FEATURES:• blade wings hydraulically
extend from 0-180 degrees• spring trip cutting edge • lateral float• cross-over relief valve protection on all 4 cylinders• hydraulic angle 30 degrees both ways• adjustable skid shoes• reversible cutting edge for longer wear life• round pipe bullnose edge on wings to
protect tiresAVAILABLE IN:• 30” high - 72” - 105” wide - 55-85 hp• 34” high - 96” - 168” wide - 80-155 hp• wings are 30” deep• extended wings add a maximum of 60” to
main mouldboard width
hyDRaUlIC END wINg sNOw BlaDEs
1-800-698-5510 19
Martatch Hydraulic End Wing Snowblades give you a significant edge over any other conventional blade. From the cab you can windrow the snow, then with the touch of a button you can setup your blade as a box blade to push it to the far end of the lot. Even tight corners aren’t an issue with this capable blade. Just swing the wings back and back-dragging becomes easy and efficient. When hard-to-get-at spots are all over your lot, don’t settle for anything less.
whEN haRD-TO-gET-aT sPOTs aRE all OvER
yOUR lOT, DON’T sETTlE fOR aNyThINg lEss
GUIDE
1-800-698-551020
TAKE A BITE OUT OF OLD MAN wINTER!
NEW STYLE SNOW PUSHER WITH BACK DRAGAVAILABLE IN:30” high, 120” wide (30-50 hp) 34” high, 144” wide (40-90 hp)38” high, 168” wide (70-120 hp)
FEATURES:• Available with Steel or Rubber cutting edge for back drag• A must have for putlling snow away from doors, buildings or loading docks• Spring trip cutting edge • AR400 Adjustable shoes
1-800-698-5510
Custom made attaChments to fit any loader or
skid steer.
Buckets - Page 3 Angle Broom - Page 13
Bale Spears - Page 4
Hydraulic Winch - Page 11
Stone Forks - Page 6
Snow Blade - Page 14
Snow Pusher - Page 16Palette Forks - Page 9
4350 Hessen Strasse, RR #3,Wellesley, ON N0B 2T0 Canada
Phone: 519-699-4668 Fax: 519-699-54161-800-698-5510
Email: [email protected] Website: www.martatch.com
LOADER ATTACHMENTS
SKIDSTEER ATTACHMENTS
SNOW BLADES
Available At: