7777 North Shore Place North Little Rock, AR 72118

501.568.3000

Branch Locations:

Springdale, AR

New Orleans, LA

Shreveport, LA

Jackson, MS

Oklahoma City, OK

Tulsa, OK

Memphis, TN

RPPOWER.COM

PLANNED MAINTENANCEIS CRITICAL.

LOAD BANKTESTING

You may never think about it until it’s too late, but Load Bank Testing on a regular basis goes a long way in saving you money.

Here are the top reasons you should safeguard your system with Load Bank Testing by RP Power.

1. By actually drawing power from the generator, load banking tests your system’s capability without interrupting standard utility services to your facility.

2. Load banking is the only way to ensure that the engine’s cooling system will perform as designed.

3. By fully loading the engine, load banking helps mitigate “wet stacking”, a condition in which unburned fuel enters the exhaust system.

4. Load banking exercises your generator. Standard exercising, running the engine with no load, only tests the engine’s ability to start. Load banking is the only true way to exercise

the entire generator.

5. Load banking is required by law in accordance with the National Fire Protection Association Code 110, “Standard for Emergency and Standby Power Systems” where life safety electrical power needs are involved.

NFPA 110 Section 8.4.2.3 states: “Diesel-powered EPS installations that do not

meet the requirements of 8.4.2 shall be exercised monthly with the available EPS

load and shall be exercised annually with supplemental loads at not less than 50

percent of the EPS nameplate kW rating for 30 continuous minutes and at not less

than 75 percent of the EPS nameplate kW rating for 1 continuous hour for a total

test duration of not less than 1.5 continuous hours.”

24 HOUR SERVICE (1-833-RP POWER)

RP Power provides customized Planned Maintenance (PM)

programs. Like any other equipment, your emergency power

system needs periodic maintenance to keep it in top condition

and ready to operate when the lights go out. The middle of

a power failure is not the time to find out your system has

problems. RP Power offers PM programs tailored to your

needs.

FACTORY CERTIFIED AND TRAINED TECHNICIANS

RP Power offers monthly, quarterly or yearly plans to meet your

budget, testing, and inspection requirements.

• 24/7 Emergency Service

• Comprehensive PM Programs

• Scheduled Inspections

• Extended Service

• Extended Warranty Programs

• Load Bank Testing

• Electrical Systems Testing

• Oil, Fuel and Coolant Testing

• Remote Wireless Monitoring

• Fuel Treating and Polishing

• Generator and ATS Rentals

• New Equipment Replacement

SERVICE MATTERS

Timely and efficient service is a well-known RP Power hallmark.

All of our technicians are factory trained professionals and we

don’t limit ourselves to just the popular brand products - we

repair ALL generator and automatic transfer switch makes and

models.

WHY PLANNED MAINTENANCE IS SO IMPORTANT

A

A

A

Semi Annual PM

You receive all services provided with Annual-PM with an additional inspection performed in six months.

Quarterly PM

You receive all services provided with Annual-PM with an additional inspection performed every three months.

Monthly PM

You receive all services provided with Annual-PM with an additional inspection performed monthly.

OUR PLANNED MAINTENANCE PROGRAMSAnnual PM

RP Power performs a thorough inspection to ensure the

functionality and reliability of your equipment. We also:

• Change engine oil and fluid filters

• Test coolant for index of refraction and particulate buildup

• Dispose of used oil and filters at an EPA approved recycling facility

• Perform battery conductance test to determine the state of health and charge of the system

• Replace air filter, if needed (additional fee)

• Test run generator under load (with customer authorization)

PROTECT YOUR INVESTMENT

A consistent planned maintenance schedule will uncover, diagnose, and correct problems before they become costly. While planned maintenance is not a problem-free guarantee, it is your best investment in the safe and reliable long term operation of your system.

Enhance the reliability of your equipment.

We service any manufacturer, make, and model.