LLC «Severstal-Gonvarri-Kaluga»

SEVERSTAL–GONVARRI–KALUGA PLANNING

First cut 23.06

First cut 18.10

First pack 19.07

GENERAL INFORMATION

Start of the project 2 quarter 2009 Put in the operation 3 quarter 2010 Investment in the non-current assets 30 million Euros Production capacity is about 170 000 tons per year Quantity of job positions: 50

LAYOUT STEEL SERVICE CENTER SGK

5

1 Blanking Line

2

Cut to length

3

Slitting Line

ITINERARY FOR FACTORY TOUR

Entry from GSK

EQUIPMENT

1 Blanking Line

1 Cut to Length Line

1 Slitting Line

BLANKING LINEIt’s a cutting line that process irregular shapes. Using a specific tool, forms can be adapted to the final shape of the part.

Technical capabilities

Input coil:

The thickness of the rolled metal: 0,6 - 3 mmCoil width: 200 - 1855 mmInternal diameter of the coil: 508 - 610 mmOuter diameter of the coil: 1000 - 2100 mm Maximum coil weight: 30 tons

Output blanks:

Maximum size of formats: 850x4000 mm The minimum size of formats : 200x200 mm

Uncoiling maximum speed 90 m/minFeeding maximum speed 120 m/minAbility to provide accuracy along the length of ± 0,1 mm

SLITTING LINETechnical capabilities

Input coil: The thickness of the rolled metal: 0,8 – 6 mm Coil width: 600 - 1850 mm Internal diameter of the coil: 508 -610 mm Outer diameter of the coil l: 900 – 2100 mm Maximum coil weight: 32 tons

Output coil:

Internal diameter: 508 -610 mmMaximum outer diameter: 2100 mmMaximum weight: 32 tonsMinimum strip width 30 mm (depending on the

thickness of rolled metal)

Maximum processing speed 300 m/min Ability to provide accuracy along the width of ± 0,5 mm

CUT TO LENGTH LINE

Technical capabilities

Input coil:

The thickness of the rolled metal: 0,5 – 3 ммCoil width: 200-1850 mm Internal diameter of the coil: 508-610 mm Outer diameter of coil: 900–2100 mm Maximum coil weight: 30 tons

Output parameters of sheets:

Maximum sheet length: 4000 mm Minimum sheet length: 200 mm Maximum weight stack: 10 tons

Maximum processing speed 90 m/minAbility to provide accuracy along the length of ± 0,5 mm