living & bedroom solutions
TRANSCRIPT
ww
w.h
afel
e.co
m.a
u
LIVING & BEDROOMSOLUTIONSBROUGHT TO YOU BY HÄFELE
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
2
STORAGE THAT FITS YOU HÄFELE LIVING AND BEDROOM SOLUTIONS
Be it in a home or apartment: space is a scarce commodity. Therefore it is essential for it to be used in the best possible way. Optimum use of space can only be achieved to a limited extent with standard solutions, since they cannot take the existing space situation or your personal requirements into consideration.
This brochure shows you some clever ideas and individual options for making use of storage space. Furnishing examples from the dressing room to the office show how you can exploit and organise existing space in the best possible way with your cabinet maker/joiner.
With Häfele as a powerful technology and design partner, we have access to a wide range of fittings, optimum design expertise and the latest technological innovations.
A WARDROBE THAT CONTAINS MORE THAN JUST CLOTHES
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
3
SLIDER SC SLIDINGWARDROBE DOORS
ELITE PULL-OUT STORAGE SYSTEM
FLEXSTORE PULL-OUT STORAGE SYSTEM
SYNERGY WARDROBE FITTINGS
PAGE PAGE PAGE PAGE
14-18 19 20-21 22-23
04 05-09 10-11 12-13
PAGE PAGE PAGE PAGE
PULL-OUT WARDROBE FITTINGS
PULL-OUT WIRE STORAGE
SHOE RACKS & RAIL SYSTEMS
DRAWER ORGANISATION
24-26 27-29 30-33 34-36PAGE PAGE PAGE PAGE
HIGH STORAGE WARDROBE RAILS AND ACCESSORIES
BED FITTINGS LADDER SYSTEMS
37 38PAGE PAGE
IRONFIX IRONING BOARD WARDROBE SECURITY
CONTENTS
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
4
Description Length (mm) Cat. No.
2 door set2000 944.02.095
2500 944.02.094
3 door set2700 944.02.093
3600 944.02.092
SLIDER SC
SOFT CLOSE SLIDING SYSTEM
The Slider SC sliding system can handle just about any size possible. Whether it’s a new build or retrofit, the design has been carefully studied to provide easy installation and adaptation without any special fitting.
The floor running system features soft closing mechanisms integrated into the top track, with a maximum weight capacity of 50 kg per door. Silent and efficient rollers provide an effortless sliding motion. The decorative vertical and horizontal door stiles provide a contemporary finish and act as an optional accessory to the timber door. Supplied packaged into 2 or 3 door openings as loose components or packaged opening sets, Häfele can provide simple and economical ordering options complete with either slimline or handle profiles. All kitsets are packed with vertical elements to 2750 mm. All horizontal rails supplied to opening widths as stated.
SLIMLINE DOOR PROFILE AND TRACK SETS
Description Length (mm) Cat. No.
2 door set2000 944.02.099
2500 944.02.098
3 door set2700 944.02.097
3600 944.02.096
HANDLE DOOR PROFILE AND TRACK SETS
Packing: 1 set
Supplied with: > Double guide track x 1 piece > Double bottom track with lip x 1 piece > Horizontal door profile x 1 piece per door, handle profile x
2 pieces per door, slimline profile x 2 pieces per door > End extrusion x 2 pieces
Note:Door set exclude fitting set - please order separately
Packing: 1 set
Packing 1 set
Cat. No.2 Door set 403.90.0003 Door set 403.90.001Additional soft close mechanism 403.90.011
FITTING SET
> Installation: Fitting set for sliding doors > Weight capacity: 50 kg per door
Supplied with: > Bottom rollers > Top guides > Soft close mechanism
Note:Consider substrate weights and measures when calculating sliding panel weights.
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
5
SMART SPACES SMART WARDROBESFOR THE STYLISH AND ORGANISED WARDROBE
Häfele‘s premium offering is ELITE Pull-Out Storage Systems. Put together to enhance our already vast product selection by focusing on one of those often forgotten areas of the home, the wardrobe.
ELITE Pull-Out Storage Systems will fulfil all your design requirements when considering any freestanding or walk-through wardrobe or dressing room. In a range of colours and sizes, almost any small or difficult area can be configured to provide the elegant and organised spaces you have always dreamed of.
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
6
> Load bearing capacity (kg): 40
> Area of application: Adjustable frame to accommodate different storage elements made of wood, steel or plastic
> Type of pull-out: Full extension, with self and soft closing mechanism
> Material: Aluminium and steel galvanised > Depth (mm): 526 > Height (mm): 68 > Installation: For screw fixing to cabinet side panel
STORAGE ELEMENTSCHROME WIRE BASKETS
ELITE PULL-OUT STORAGE SYSTEM
PULL-OUT FRAME
Packing: 1 piece
CHROME WIRE SHELVES
CHROME WIRE SHOE RACKS
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Depth (mm) Height (mm) Width (mm) Cat. No.
510 150
305 805.83.105410 805.83.101490 805.83.102730 805.83.103
Internal cabinet width (mm)
Effective width (mm)
White Black
410 - 550 310 - 450 805.85.731 805.85.331
550 - 690 450 - 590 805.85.732 805.85.332
690 - 830 590 - 730 805.85.733 805.85.333
830 - 970 730 - 870 805.85.734 805.85.334
970 - 1100 870 - 1000 805.85.735 805.85.335
> Material: Steel > Finish: Chrome polished > Installation: For hanging onto pull out frame
> Material: Steel > Finish: Chrome polished > Installation: For hanging onto pull out frame
> Material: Steel > Finish: Chrome polished > Installation: For hanging onto pull out frame
Note:To help with selecting the correct individual components for use with the Soft Closing pull-out frames, the following information applies: The useable space for accessories is determined by the internal cabinet width – 100 mm (i.e For a 900 mm overall cabinet with 16 mm sides your useable space for accessories is: 900 – 32 = 868 – 100 = 768 mm).
Internal cabinet width for pull-out framePlease take care not to exceed the usable width when subdividing the pull-out frame. Effective width = internal cabinet width – 100 mm
Installation depth for pull-out frameThe installation height varies depending on the storage elements that are used. Please refer to the product pages for further information.
Installation dimensions
Depth (mm) Height (mm) Width (mm) Cat. No.
510 90
305 805.83.125410 805.83.121490 805.83.122730 805.83.123
Depth (mm) Height (mm) Width (mm) Cat. No.
510 200390 805.84.101470 805.84.102
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
7
SHATTER PROOF PLASTIC TRAYS
QUILTED COTTON BASKET LINERSFor use with wire and plastic baskets and trays
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Width (mm) Depth (mm) Height (mm) Cat. No.98 440 - 520 43 807.49.390
> Material: Plastic > Colour: Transparent > Installation: For hanging onto pull-out frame or wooden
trouser rack
Note:When laundry bag is loaded, height will be greater than specified.
> Material: Plastic > Colour: Transparent > Installation: For hanging onto pull-out frame
> Material: Tuffed cotton > Colour: Cream > Installation: For inserting into wire basket or wire shelf
LAUNDRY HAMPERSWith timber frame
With steel frame
Packing: 1 piece
Width (mm) Depth (mm) Height (mm) Cat. No.480 505 430 805.82.120
> Usage: For hanging onto frame > Includes: Removable bag with handle holes > Material: Beech timber frame, linen bag > Finish: Lacquered beech frame, cream linen bag
> Usage: For hanging onto frame > Includes: Removable bag with handle holes > Material: Steel frame, linen bag > Finish: Silver frame, cream linen bag
Packing: 1 piece
Width (mm) Depth (mm) Height (mm) Cat. No.480 505 430 805.82.200
Note:When laundry bag is loaded, height will be greater than specified.
ELITE PULL-OUT STORAGE SYSTEM
PULL-OUT FRAMESHATTER PROOF ACCESSORY TRAY
Depth (mm) Height (mm) Width (mm) Cat. No.
508 85
240 805.83.481320 805.83.482400 805.83.483480 805.83.484
Depth (mm) Height (mm) Width (mm) Cat. No.
465 5
300 805.83.491400 805.83.492460 805.83.493720 805.83.494
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
8
BEECH TROUSER HOLDER
Width(mm)
Depth (mm)
Height (mm)
White Black
305 50586 805.83.750 805.83.350148 805.83.760 805.83.360
Packing: 1 piece
Packing: 1 piece
455 mm Wide
720 mm Wide
BEECH INSERT FOR TIES, BELTS AND ACCESSORIES
Packing: 1 piece
Packing: 1 piece
Width (mm) Depth (mm) Height (mm) Cat. No.
300 476 60 805.83.370
Width (mm) Depth (mm) Height (mm) Cat. No.455 510 60 807.49.310720 525 65 807.49.302
Width (mm) Depth (mm) Height (mm) Cat. No.455 510 103 807.48.120
> Version: Base: Beech, natural coloured > Material: Steel > Installation: For hanging onto pull-out frame
> Area of application: Only suitable for steel tray basket > Material: Beech > Adjustment facility: Between 12 or 15 compartments,
adjustable > Suitable for: Ties and belts
CHROME WIRE TROUSER HOLDER
> Material: Steel > Finish: Chrome polished > Installation: For hanging onto pull-out frame
> Material: Beech > Finish: Lacquered > Installation: For hanging onto pull-out frame > Features: 720 mm version includes space for accessory
tray
PULL-OUT CLOTHES HANGER
> Fixing: Left or right handed > Mounting: Top, with single extension ball bearing slide > Dimensions (mm): 84 x 526 x 163 (W x D x H) > Load Capacity (kg): 5 > Finish: White or black powder-coated with chrome
wire
Packing: 1 piece
Colour Cat. No.White 807.45.030Black 807.45.330
ELITE PULL-OUT STORAGE SYSTEM
PULL-OUT FRAMEPOWDER COATED STEEL TRAY BASKETS With beech base
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
9
> Fixing: Left or right handed > Mounting: Side, with single extension ball bearing slide > Load Capacity (kg): 10 > Finish: White or black powder-coated with chrome
wire
Packing: 1 piece
PULL-OUT BELT / TIE RACK
> Fixing: Left or right handed > Mounting: Side, with single extension ball bearing slide > Load Capacity (kg): 5 > Finish: White or black powder-coated with chrome
wire
Packing: 1 piece
PULL-OUT WIRE SHELFSide mounted, with soft close runners
PULL-OUT WIRE SHOE RACKSide mounted, with soft close runners
ACCESSORY TRAY
TiersHeight (mm)
FixingPowder-coated
White Black3 772 RH 805.81.074 805.81.174
LH 805.81.075 805.81.1752 580 RH 805.81.076 805.81.176
LH 805.81.077 805.81.177
Width (mm)
Depth (mm)
Height (mm)
White Black
267 509 220 805.81.690 805.81.190
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
> Dimensions (mm): 291 x 521 (W x D x H) > Load Capacity (kg): 40 > Finish: Shelves: Chrome wire
> Dimensions (mm): 291 x 521 (W x D x H) > Load Capacity (kg): 40 > Finish: Shelves: Chrome wire
> Area of application: For hooking into shoe rack > Finish: Translucent tray with white or black
connecting fittings, chrome wire frame
TiersHeight (mm)
FixingPowder-coated
White Black3 772 RH 805.81.066 805.81.166
LH 805.81.063 805.81.1672 580 RH 805.81.064 805.81.164
LH 805.81.065 805.81.165
ELITE PULL-OUT STORAGE SYSTEM
PULL-OUT FRAMEPULL-OUT TROUSER RACK
Width (mm)
Depth (mm)
Height (mm)
White Black
163 526 84 807.46.030 807.46.330
Width (mm)
Depth (mm)
Height (mm)
White Black
257 526 290 807.47.020 807.47.320
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
10
WARDROBES THAT ARENOT OFF THE PEGFLEXSTORE
Your clothes and accessories fit you. But does a standard wardrobe also fit your clothes and accessories? Fortunately, it has never been so simple, with Flexstore solutions for perfect organisation. Sophisticated fittings provide an optimum space situation. From cufflinks to winter coats, everything has its place.
FLEXSTORE PULL-OUT STORAGE SYSTEM
PULL-OUT FRAME
Installation dimensions
> Area of application: For flexible storage system combinations, variable pull-out frame for baskets, trouser and shoe racks.
> Material: Aluminium, steel > Finish/colour: Galvanized, Silver coloured > Internal installation
depth: min. 515 mm > Type of pull-out: Full extension with self closing and soft closing
mechanisms
Packing: 1 piece
Cat. No.806.10.900
Supplied with: > 1 Pair of frame sides > 1 Pair of runners, with bracket for wall mounting and cover
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
11
Packing: 1 piece
Note:Railing length = cabinet width – 150 mmSeveral hook-in elements can be combined when hooked onto the crossrail.A side panel thickness of 19 mm is required when hooked onto the pullout frame (without cross rail).
RAILING
Packing: 1 piece
For cabinet width (mm) Length (mm) Cat. No.600 450 806.10.915900 750 806.10.913
> Area of application: For stabilisation, for hooking accessories onto the pull-out frame
> Version: Can be shortened > Material: Aluminium > Colour: Silver coloured > Side panel thickness: 16–19 mm
For cabinet width (mm) Dim. W x D x H (mm) Cat. No.600 457 x 446 x 150 806.09.243900 751 x 446 x 150 806.09.244600 457 x 446 x 300 806.09.253900 751 x 446 x 300 806.09.254
For cabinet width (mm)
Dim. W x D x H (mm)
No. Trousers Cat. No.
600 457 x 446 x 100 11 pairs 806.09.273900 757 x 446 x 100 13 pairs 806.09.274
TROUSER RACK
WIRE BASKET
For cabinet width (mm) Dim. W x D x H (mm) Cat. No.600 457 x 446 x 170 806.10.245900 757 x 446 x 170 806.10.246
Packing: 1 piece
SHOE RACK
Packing: 1 piece
LAUNDRY BAG WITH VELCRO FASTENING & RACK
Cabinet width (mm)
Dim. W x D x H (mm)
Version Cat. No.
Laundry bag rack
600 457 x 446 x 8 1 806.10.265900 757 x 446 x 8 2 bags 806.10.266
Bag600 353 x 430 x 430 - 806.10.767900* 326 x 430 x 430 - 806.10.768
Packing: 1 piece
Note:* Please order 2 bags for 900 mm frame.
FLEXSTORE PULL-OUT STORAGE SYSTEM
HOOK IN ELEMENTS
RAILING HOLDER
> Area of application: For hooking onto the pull-out frame > Colour: Tele grey 4, RAL 7047
Packing: 1 set
Cat. No.806.10.590
HOLDER FOR WIRE
> Area of application: For hooking baskets, trouser and shoe racks onto pull-out frame or railing
> Material: Plastic > Colour: Tele grey 4, RAL 7047
Packing: 1 set
Version Supplied with Cat. No.For hooking onto railing 4 holders 806.10.595
For hooking onto pull-out frame
4 holders and 2 stabilising brackets 806.10.597
In pull-out frame with stabilising bracket
In railing
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
12
SYNERGY WARDROBE FITTINGS
HAMPERSPULL-OUT HAMPER
TILT-OUT HAMPER
Packing: 1 set Packing: 1 set
Frame attaches to the back of tilt – out door.
Width (mm) Number of bags Cat. No.Polished chrome457 1 (1 large bag) 807.52.231610 2 (2 small bags) 807.52.233762 2 (1 large & 1 small bag) 807.52.235Matt aluminium457 1 (1 large bag) 807.52.931610 2 (2 small bags) 807.52.933768 2 (1 large & 1 small bag) 807.52.935
Width (mm) Number of bags Cat. No.418 1 (1 large bag) 547.43.302568 2 (2 small bags) 547.43.300714 2 (1 large & 1 small bag) 547.43.305
Replacement bags
> Area of application: Pull-out, with full extension slides and removable bags
> Material: Frame: aluminium, anodised, bag: nylon black
> Dimensions (mm): 355 x 546 (D x H). Height is from top of the handle to the bottom of the bag
Supplied with: > Frame > Bag/bags
> Area of application: Screw-mounts to back of door, with removable bags
> Material: Frame: steel, epoxy-coated; black, bag: nylon black
> Dimensions (mm): 345 x 600 (D x H). Height is from top of the handle to the bottom of the bag
Supplied with: > Frame > Bag/bags
Packing: 1 set
Dim. W x D x H (mm) Number of bags Cat. No.267 x 306 x 485 1 (1 large bag) 547.43.390380 x 306 x 485 2 (2 small bags) 547.43.391
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
13
Packing: 1 piece
For cabinet width (mm) Length (mm) Cat. No.Polished chrome457 12 805.58.231610 18 805.58.233762 24 805.58.235Matt aluminium457 12 805.58.931610 18 805.58.933762 24 805.58.935
A
58.3(2 5/16”)
83.1(3 1/4”)
354
449
> Version: Without handles > Material: Aluminium trouser rack, steel wire trouser
hangers > Dimensions (mm): 354 x 58 (D x H)
Supplied with: > Frame > Hangers
GARMENT CLIP
Optional garment clip attaches to hangers for skirts, trousers etc.
Packing: 100 pieces (2 required per hanger)
WIRE TROUSER RACK
> Area of application: Extra hangers for trouser rack > Material: Steel, epoxy-coated
Packing: 1 piece
Finish Cat. No.Black 805.58.330
> Area of application: For skirts and trousers, use with hangers > Material: Plastic
Finish Cat. No.Black 805.58.331
SYNERGY WARDROBE FITTINGS
TROUSER RACKSPULL-OUT TROUSER RACKWith full extension slides
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
14
> Version: For right and left hand use > Material: Cover: Aluminium, silver coloured
Hooks: Chrome plated polished > Type of pull-out: Full extension > Installation: Concealed fixing
Packing: 1 piece
Dimensions (mm) Cat. No.454 x 65 x 67 (W x D x H) 805.67.905
PULL-OUT WARDROBE FITTINGS
TIE RACKFULL EXTENSIONFor 24 ties
BELT RACKFULL EXTENSION For 8 belts
> Version: For right and left hand use > Material: Cover: Aluminium, silver coloured
Hooks: Zinc alloy > Finish/colour: Hooks: Chrome plated, polished
Cover: Silver coloured > Type of pull-out: Full extension > Installation: Concealed fixing
Packing: 1 piece
Dimensions (mm) Cat. No.454 x 42 x 71 (W x D x H) 805.67.915
CLOTHES HANGER HOLDER
> Version: Extending > Material: Cover: Aluminium, Hooks: Zinc alloy > Finish/colour: Hooks: Chrome plated, polished
Cover: Silver coloured > Extension
length (mm): 243 > Installation: Concealed fixing
Packing: 1 piece
Dimensions (mm) Cat. No.359 x 48 x 24 (W x D x H) 807.71.403
SCARF RACKFULL EXTENSION For 8 scarves
> Version: For right and left hand use > Material: Cover: Aluminium, Hooks: Zinc alloy > Finish/colour: Hooks: Chrome plated, polished
Cover: Silver coloured > Type of pull-out: Full extension > Installation: Concealed fixing
Packing: 1 piece
Dimensions (mm) Cat. No.359 x 48 x 24 (W x D x H) 807.67.425
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
15
PULL-OUT WARDROBE FITTINGS
TIE RACK, 3/4 EXTENSION SLIDEFOR 20 TIES
Packing: 2 pieces
Finish Cat. No.Chrome, polished/black 807.54.233Aluminium, matt/black 807.54.933
> Dimensions (mm): 358 x 56 x 43 (W x D x H) > Material: Aluminium support track, plastic hooks
BELT RACK 3/4 EXTENSION SLIDEFOR 6 BELTS
Packing: 2 pieces
Finish Cat. No.Chrome, polished/black 807.54.231Aluminium, matt/black 807.54.931
> Dimensions (mm): 358 x 56 x 43 (W x D x H) > Material: Aluminium support track, plastic hooks
SCARF RACK 3/4 EXTENSION SLIDEFOR 6 SCARVES
Packing: 2 pieces
Finish Cat. No.Aluminium, matt/black 807.54.934
> Dimensions (mm): 358 x 56 x 43 (W x D x H) > Material: Aluminium support track, plastic hooks
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
16
BELT RACKFor 7 belts, fixed
BELT RACKFor 8 belts, extending
PULL-OUT WARDROBE FITTINGS
TIE AND BELT RACKS
> Material: Aluminium support rack and rails, plastic screw-on parts and hooks or clips
> Finish: Support rack and rails silver coloured anodised, screw-on parts and hooks transparent or black
Packing: 1 pieces
Plastic parts colour Cat. No.Transparent 807.25.955Black 807.25.935
> Dimensions (mm): 432 x 48 x 47 (W x D x H)
TIE RACKFor 28 ties, fixed
Packing: 1 pieces
Plastic parts colour Cat. No.Transparent 807.22.951Black 807.22.931
> Dimensions (mm): 432 x 48 x 47 (W x D x H)
Packing: 1 pieces
Plastic parts colour Cat. No.Transparent 807.25.950Black 807.25.930
> Dimensions (mm): 432 x 48 x 47 (W x D x H)
TIE RACKFor 32 ties, extending
Packing: 1 pieces
Plastic parts colour Cat. No.Transparent 807.21.950Black 807.21.930
> Dimensions (mm): 432 x 48 x 47 (W x D x H)
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
17
Packing: 1 piece
Cat. No.807.16.203
30
300
270
EXTENDING
28
22
PULL-OUT WARDROBE FITTINGS
TIE AND BELT RACKS
> Material: Extension: steel, Mounting block and spacer: plastic,
> Finish: Wire parts: chrome-plated polished, Mounting block and spacer: silver coloured
> Version: With glide and spacer for compensating for door offsets, can be used right or left
Packing: 1 pieces
Cat. No.807.41.211
> Version: With non-slip rails. 5 hooks and 9 rails > Dimensions (mm): 74 x 455 x 118 (W x D x H)
Supplied with: > Fixing Materials
EXTENDING
Packing: 1 pieces
Cat. No.807.41.210
> Version: With non-slip rails. > Dimensions (mm): 74 x 455 x 87 (W x D x H)
Supplied with: > Fixing Materials
EXTENDING
Packing: 1 pieces
Cat. No.807.41.206
> Version: For left or right hand use > Dimensions (mm): 130 x 540 x 90 (W x D x H)
FIXED
Packing: 1 pieces
Cat. No.807.20.743
> Material: Steel rail, zinc- alloy rail mounts > Finish: Nickel-plated polished > Hole spacing (mm): 400
SWIVELS BY 90º
> Installation width (mm): 320
> Material: Steel rail, zinc-alloy bearing > Finish: Chrome-plated
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
18
PULL-OUT WARDROBE FITTINGS
PIVOT PULL-OUT MIRROR
Installation dimensions
Packing: 1 set
Cat. No.563.40.341
> Version: With single extension runners > Fixing: Side mounting / reversible > Finish: Mirror > Dimensions (mm): 45 x 445 x 1450 (W x D x H) > Runner depth: 400 > Mirror size: 300 x 1400 (W x H)
SHOE RACK PULL-OUT
> Features: Extending shoe rack with shelves for up to 50 pairs of shoes
Extending and rotating (180º) for access from both sides
Shelves can easily be hooked in and removed for easy cleaning
> Version: Shoe rack pull-out rotates through 180° > Material: Hanging frame: Steel, shelves: Plastic > Finish: Hanging frame: Black, shelves: Dark grey > Installation: For screw fixing to base panel and shelf > For internal cabinet > height (mm): 1,680 / 1000 > For internal cabinet > depth (mm): > 365 > Load bearing > capacity (kg): 2 kg per shelf > Max. shoe > length (mm): 310
Packing: 1 set
Installed height Number of shoes Cat. No.1680 50 806.22.3011000 20 806.22.300
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
19
Packing: 1 piece
Installed Actual basket size (mm)Cat. No.Height
(mm)Width (mm)
Depth (mm) Width (mm)
For carcase width: 450 mm150 418 420 410 540.14.711210 418 420 410 540.14.721325 418 420 410 540.14.731For carcase width: 457 mm150 425 420 410 540.14.712210 425 420 410 540.14.722325 425 420 410 540.14.732For carcase width: 508 mm150 475 420 410 540.14.713210 475 420 410 540.14.723325 475 420 410 540.14.733
PULL-OUT WIRE STORAGE
BASKET AND RUNNER SET
> Area of application: Kitchen cabinets and wardrobes > Material: Steel > Finish: White powder-coated
BASKET
> Area of application: Designed for cabinet interiors with doors To suit full extension ball bearing runners.
> Material: Steel > Finish: Chrome-plated > Carcase
width (mm): 450, 600 and 900
Packing: 1 piece
Installed Actual basket size (mm)Cat. No.Height
(mm)Width (mm)
Depth (mm) Width (mm)
For carcase width: 450 mm150 418 400 356 541.70.261280 418 400 356 541.70.260430 418 400 356 541.70.265For carcase width: 600 mm150 568 400 506 541.71.261280 568 400 506 541.71.260430 568 400 506 541.71.265For carcase width: 900 mm150 868 400 806 541.72.261280 868 400 806 541.72.260430 868 400 806 541.72.265
BASKET RUNNERS
> Material: Steel > Finish: Zinc-plated > Length (mm): 400 > Load capacity (kg): 30
Packing: 1 pair
Cat. No.541.78.841
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
20
SHOE RACK AND RAIL SYSTEMS
SHOE RACKCONTINUOUSLY ADJUSTABLE
WALL RAIL FOR SHOE RACK
SHOE RACKCONTINUOUSLY ADJUSTABLE
TILT MECHANISM INSTALLATION IN SHOE CUPBOARDS
Packing: 1 piece (with fixing material)
Width (mm) Rail colourPlastic parts colour
Cat. No.
560 - 1000Aluminium coloured Grey 892.11.901
Black Black 892.11.300
296307
199247
560–1000
102
221
200
460–75085
Installation options
> Material: Steel rail, plastic screw-on parts > Finish: Chrome-plated rail and silver
coloured screw-on parts > Installation: Screw fixing independently or with
wall rail 892.12.990
Packing: 1 piece
Width (mm) Cat. No.460 - 760 892.12.906
> Area of application: Mounting of multiple shoe racks, 892.12.906 > Material: Aluminium rail, plastic end caps > Finish: Silver coloured rail, silver coloured end caps > Version: With end caps > Installation: Screw fixing to wall
Packing: 1 pair
Width (mm) Length (mm) Cat. No.460 - 760 1120 892.12.990
> Material: Steel rail, plastic rail mounts > Colour: Rail aluminium coloured or black, plastic parts
grey or black > Installation: In shoe cupboards
Packing: 1 pair (with fixing material)
Compartments Cat. No.2 892.14.7283 892.14.737
> Material: Plastic > Colour: White > Installation: In shoe cupboards
SHOE RACKFOR 2 PAIRS
45
411220
26
> Material: Steel wire > Finish: Plastic-coated white aluminium > Installation: Screw fixing to wall
Packing: 1 pair
Width (mm) Cat. No.411 544.43.210
160
420 - 630105 - 110
Packing: 1 piece
Compartments Cat. No.2 544.43.7573 544.43.766
> Material: Steel wire > Colour: White, powder-coated > Installation: Screw fixing to wall
SHOE RACKFOR 2 OR 3 PAIRS
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
21
SHOE RAIL SYSTEM
SHOE RAILCUT TO SIZE
SHOE RAIL BRACKET
F
F
32
13.3(1/2”)
28.6
2º
4.7(3/16”)
7(1/4”)
12.1(1/2”)
18.7(3/4”)
18.9(3/4”)
32
32
Ø5
18.4
º
64
68192
Mounting
Rear rod can be positioned upwards, allowing shoes to be displayed on an incline.
1.3(1/16”)
L
Ø19 1
Length (mm) Finish Cat. No.
914Chrome, polished 805.87.210Aluminium, matt 805.87.910
Packing: 1 piece
Note:Requires mounting rail, order separately.
> Material: Aluminium, anodised
> Area of application: Connects the shoe rail to the side panel using 32 mm line bore holes with 5 mm press in dowels
> Material: Aluminium, anodised
Packing: 1 piece
Finish Cat. No.Black 805.87.993
SHOE FENCE RAILS
SHOE RAIL
Length (mm)Polished chrome
Matt nickel
275 547.52.221 547.52.621425 547.52.222 547.52.622575 547.52.223 547.52.623725 547.52.224 547.52.6241025 547.52.226 547.52.626
> Area of application: For shelving > Features: Width can be reduced by sliding the end post
off and cutting. Aluminium rail, reattach post by tapping on
with rubber mallet. Centre post slides back and forth for easy positioning. Horizontal rails are two sided, one being
smooth and the other. Textured to match other Synergy Elite items.
> Material: Aluminium
Packing: 1 piece
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
22
DRAWER ORGANISATION
DRAWER INSERTS12 COMPARTMENTS
545
1715
17
3
380
545
150
380
120 12091
135
352 66
127
12
14
Packing: 1 piece
Width (mm) Depth (mm) Height (mm) Cat. No.545 380 70 811.17.303
> Version: 12 compartments > Material: Exterior - artificial leather
Interior - felt > Colour: Black interior, black surround
8 COMPARTMENTS + RING HOLDER
Packing: 1 piece
Width (mm) Depth (mm) Height (mm) Cat. No.545 380 70 811.17.301
> Version: 8 compartments > Material: Exterior - artificial leather
Interior - felt > Colour: Black interior, black surround
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
23
FOR WATCHES AND JEWELLERYWith 6 rows
FOR WATCHES AND JEWELLERY With 6 rows
DRAWER ORGANISATION
DRAWER INSERTSFOR SOCKS AND TIES
Packing: 1 piece
Compartments Cat. No.9 811.15.50216 811.15.503
> Material: Steel > Finish: Powder-coated grey
Interior – felt > Dimensions (mm): 300 x 300 x 69 (W x D x H)
Packing: 1 piece
Cat. No.811.15.505
> Material: Steel > Finish: Powder-coated grey
Interior – felt > Dimensions (mm): 300 x 300 x 14 (W x D x H)
Packing: 1 piece
Cat. No.811.15.504
> Material: Steel/timber > Finish: Black > Dimensions (mm): 300 x 300 x 14 (W x D x H)
FOR DRAWER BASE
Packing: 1 piece
Cat. No.891.21.593
> Material: Felt > Finish: Black > Dimensions (mm): 450 x 1000 (2 mm thick)
Version A Version B
Version C
Version Cat. No.A 811.08.300B 811.08.301C 811.08.303Lid 811.08.309
Packing: 1 piece
MULTI-FUNCTION INSERTS
JEWELLERY INSERTSSTACKABLE
> Material: Solid timber > Finish: Box: Beech
Internal: black flocked Lid: Beech
> Dimensions (mm): 227 x 300 x 32 (W x D x H)
Lid
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
24
HIGH STORAGE
WARDROBE LIFTWITH INTEGRATED SOFT OPENING MECHANISM Load bearing capacity 10 kg
> Area of application: For 560 - 1100 mm carcase > Material: Clothes arm and rail: Steel, pull rod, housing
and connecting parts: plastic > Installation: For screw fixing to side panel
Packing: 1 piece
Surface colourFor internal cabinet
width (mm)
560 - 950 750 - 1100Brown, pull rod: transparent 805.25.100 805.25.101
Black, arm and clothes rail: Chrome plated, pull rod: transparent 805.25.300 805.25.301
White, pull rod: Transparent 805.25.700 805.25.701
White, arm and clothes rail: Chrome plated, pull rod: Transaparent 805.25.200 805.25.201
Supplied with: > Fixing Materials
Installation in centre of wardrobe side panel
Installation in rear row of holes
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
25
Packing: 1 set
For internal cabinet width (mm)Colour 440 - 610 600 - 1000 770 - 1200Grey 805.20.525 805.20.532 805.20.557Black & chrome rail 805.20.324 805.20.331 805.20.355
Black & nickel-plated rail 805.20.424 805.20.431 805.20.455
White & chrome rail 805.20.724 805.20.731 805.20.755
HIGH STORAGE
2004 WARDROBE LIFTFOR MOUNTING TO SIDE PANELLoad bearing capcity 10 kg
> Material: Arm and clothes rail: steel Pull rod, housing and connecting parts: plastic
> Colour: Clothes rail: Nickel-plated > For internal cabinet
width (mm): 440 - 1200 > Load bearing
capacity (kg): 1.6 - 10 > Installation: For screw fixing to side panel
SUPER PRO WARDROBE LIFTFOR MOUNTING TO SIDE PANELLoad bearing capacity 18 kg
For internal cabinet width (mm)
Load bearing capacity (kg)
Cat. No.
800 - 1100 18 805.24.961
> Version: Clothes rail for Super Pro can be shortened > Load bearing
capacity (kg): 18 kg > Material: Steel, housing, screw-on parts and connecting
parts: Plastic > Colour: White aluminium housing, screw-on parts and
connecting parts: Grey > Installation: For screw fixing to side panel into 32 mm
series drilled holes with distance of 480 mm or 450 mm between the rows of vertical holes.
Packing: 1 piece
SOFT OPENING MECHANISMFor 2004 Wardrobe Lift
> Area of application: For soft and gentle opening of 2004 Wardrobe Lift
> Installation: Hook into the housing of the 2004 Wardrobe Lift
Packing: 1 set
Material Colour Cat. No.
PlasticGrey 805.20.906Black 805.20.905White 805.20.907
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
26
Packing: 1 piece
Mounting plateFinishClothes rail
ColourArm mounting plate
Cat. No.
For internal wardrobe width 600 – 1000 mm
LargeSilver Grey 805.21.911Nickel-plated Black 805.21.310
For internal wardrobe width 730 – 1190 mm
LargeSilver Grey 805.21.901Nickel-plated Black 805.21.300
HIGH STORAGE
ONLY WARDROBE LIFTFOR MOUNTING TO SIDE PANELLoad bearing capacity 12 kg
> Material: Clothes rail: steel Mounting plate and arm: plastic
> Colour: Clothes rail: Nickel-plated > For internal cabinet
width (mm): 600 - 1190 > Clothes rail Ø (mm): 22.4 > Installation: For screw fixing to wardrobe side panel into
32 mm series drilled hole.
WARDROBE LIFTFOR MOUNTING TO REAR PANELLoad bearing capacity 8 kg
Colour Cat. No.Grey, arm and clothes rail: Silver 805.29.901Black, arm and clothes rail: Nickel-plated 805.29.300
Packing: 1 piece
> Material: Arm and clothes rail: Steel, screw-on plate, housing, connecting parts and pull rod: Plastic
> Adjustment facility: Clothes rail 620 – 950 mm
Note:Screw holes of the wardrobe lift are covered.
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
27
WARDROBE RAILS AND ACCESSORIES
OVA WARDROBE RAILSWELDED
30
15
1
Material thickness (mm) Cat. No.0.7 801.39.2121.0 801.39.2321.2 801.39.2421.5 801.39.252
Packing: 1 piece (2500 mm)
30
15
1.0 - 1.5
> Material: Steel > Finish: Chrome-plated > Height (mm): 30
> Material: Steel > Finish: Nickel-plated > Height (mm): 30
Material thickness (mm) Cat. No.1.0 801.14.702
Packing: 1 piece (2500 mm)
> Material: Aluminium > Finish: Silver anodised or white powder coated > Height (mm): 30
Material thickness (mm) Colour Cat. No.
1.5Silver anodised 801.08.904White 801.08.704
Packing: 1 piece (3600 mm)
30
15
1.5
WARDROBE RAIL RECTANGLE
30
10
1.0
> Material: Steel > Finish: Chrome-plated > Height (mm): 30 > Width (mm): 10
Material thickness (mm) Cat. No.1.0 801.59.232
Packing: 1 piece (2500 mm)
END SUPPORTS
> Material: Steel > Finish: Chrome-plated > Height (mm): 76 > Width (mm): 14
Material thickness (mm) Cat. No.1.0 803.34.200
Packing: 1 set
45
1420
11
32
4432
1420
118
RAIL END SUPPORTS
> Material: Zinc-alloy > Finish: Nickel-plated > Mounting: Screw fixing
Screw fixing to side panel
Cat. No.803.33.757
Packing: 1 piece
Screw fixing to side panel - with mounting pin
Mounting pin (mm) Cat. No.Ø5 803.33.725
Packing: 1 piece
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
28
WARDROBE RAILS AND ACCESSORIES
WARDROBE RAILS FOR CORNERS90º CURVED RAIL
Material thickness (mm) Cat. No.1.0 801.19.200
Packing: 1 set
825
825
45
90-105
1621
20.5
15
1
30
End supportCentre support
90º wardrobe rail
30010
43
1319
10
22
WARDROBE RAIL CORNER SETFOR CONNECTING TO STRAIGHT RAILS
Supplied with: > 1 x Wardrobe rail > 2 x End supports > 2 x Centre supports > Fixing material
> Material: Rail: Steel End supports: Zinc-alloy Centre supports: Zinc-alloy
> Finish: Rail: Chrome, polished End Supports: Nickel-plated Centre supports: Chrome, polished
> Features: Height adjustable centre supports > Length (mm): 825 x 825
> Material: Rail: Steel Rail connectors: Steel Centre supports: Zinc-alloy
> Finish: Rail, centre supports and rail connectors: Chrome, polished
> Features: Height adjustable centre supports > Dimensions (mm): 350 x 350
Material thickness (mm) Cat. No.1.0 801.19.201
Packing: 1 set
END CAPPush Fit
30 15
12.5
> Area of application: For use with 30 x 15 mm wardrobe rails > Finish: Black plastic insert, polished chrome-plated
cap
Cat. No.805.05.291
Packing: 1 set
350
350
15
1
30
Wardrobe railconnectorCentre support90º wardrobe rail
46
11
75
22
16
32
15
30
60
WARDROBE RAIL CORNER SETFOR CONNECTING TO STRAIGHT RAILS
30
15350
Material thickness (mm) Cat. No.1.0 801.19.220
Packing: 1 set
> Material: Steel > Finish: Polished chrome
Note:Suitable for use with rail 801.39.232.
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
29
Conductor
Profile railbracket
Profile rail
Hanger
BUILT-IN WARDROBE
PROFILE RAIL FOR ANTI THEFT HANGERS
BRACKET FOR PROFILE RAIL
CONDUCTOR
HANGER
Packing: 1 piece
Packing: 1, 20 and 50 pieces
Colour Cat. No.Silver 804.30.403
Type Material ColourLength (mm)
Cat. No.
BasicPlastic Light grey 400 804.31.509Beech Polished 450 804.32.006
With trouser hanger
Plastic Light grey 400 804.31.518Beech Polished 450 804.32.015
Conductor
Profile railbracket
Profile rail
Hanger
With trouser hanger
> Material: Aluminium > Length (mm): 2500
Packing: 1 or 20 pieces
Colour Cat. No.White 804.31.214
> Material: Plastic > Mounting: Screw into side wall
Packing: 1, 20 and 50 pieces
Colour Cat. No.Light grey 804.31.107
> Material: Plastic > Area of application: Holding fixture for hanger
> Material: Plastic or beech > Mounting: Mount in conductor
Basic51/5938/43
25/31
Ø4(Ø7.5)
22/30
72/82
7
36/4261/67
20/26
12/15
6
1
18/25
51/6038/45
25/314
22/28
515/1623/30
1
Ø4 (Ø8)
Ø57
Ø45
3 x Ø6.8
3 x Ø4 3 x 120º±1º
Ø28
22.3
R.8.7R.5
1.4
Ø25.6
Ø29
WARDROBE RAILS AND RAIL SUPPORTS
WARDROBE RAIL
> Material: Steel > Finish: Chrome-plated > Material
thickness (mm): 1
Packing: 1 piece (3600)
Tube diameter (mm) Cat. No.Ø18 801.55.233Ø25 801.54.233
OVAL RAIL END SUPPORT
> Material: Steel > Finish: Chrome-plated > Mounting: Screw fixing
Packing: 1 piece
To suit tube diameter (mm) Cat. No.Ø18 803.01.252Ø25 803.01.250
ROUND RAIL END SUPPORT
Packing: 1 piece
To suit tube diameter (mm) Cat. No.Ø25 803.01.270
RAIL END BRACKET AND CENTRE SUPPORT
> Material: Zinc alloy > Finish: Chrome-plated > Mounting: Screw fixing
Packing: 1 piece
To suit tube diameter (mm) End bracketCentre support
Ø18 803.06.203 802.09.203Ø25 803.06.205 802.09.205
End bracket
Centre support
51/59
20/26
23/31
638/43
25/31
Ø4 (Ø7)
72/82
7
22/30
61/6736/42
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
30
Installation
HIGH-TECH FOAM MATTRESS
Packing: 1 set
Version Cat. No.Without mattress 271.92.132
BED FITTINGS
BED-LIFTQUEEN-SIZE With adjustable front
1584
75-95 Toekick height
2145
Min. depth 470 based on a 203 thick mattress
1852
310
Dimensions are internal cabinet dimensions.
Bed-lift installation has never been so easy and safe. Häfele’s bed-lift system comes complete with pre-mounted fittings and can be installed in 4 easy steps.
1. Mark drilling position on both panels with the aid of the included drilling pattern.
2. Drill 7 holes in each side panel.
3. Fasten the two support brackets with the screws provided.
4. Slide bed frame onto support brackets, tighten screws, and attach the front panel.
> Ensure that the wall surface is suitable for attaching the securing brackets.> Secure foldaway beds with securing brackets to prevent tilting.
> Features: Sturdy, torsion-free, tubular steel frame with concealed gas-filled struts Integral automatic foot folding mechanism extends the feet automatically when the bed is opened for use and retracts when closed. Choice of plinth panel height from 75-95 mm The dimensions listed are internal cabinet dimensions, the cabinet and bed box constructions require a wood thickness of 19-25 mm
> Material: Steel, Slats: Wood, elm > Colour: Black
Supplied with: > 2 Securing brackets > Bedding Straps > 1 Set of installation instructions
Note:Bed weight: The gas filled struts are designed to accompany a 19 mm particle board front with a weight of approximately 45 kgs, and a mattress weighing 30-40 kgs (the bed-lift will not operate properly unless these two ratings are adhered to).
Internal cabinet dimensions
Packing: 1 piece
Dimensions (mm) Cat. No.1530 x 2030 x 170 (Queen size) 271.65.040
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
31
InstallationOrder reference:
> Order 2 single beds and 1 centre support for double bed. > Weaker or stronger struts can be installed for different load
capacities.
960
75–1
0021
00
480–6001926
90–1
00
480–600
2100
71 380
2382650
269045
0
> Follow supplied installation drawing and assembly instructions. > 2 Single beds can be installed next to each other with a center
support to make the double bed. The cabinet for double beds does not have a centre/side panel.
> The specified carcase dimensions are internal carcase dimensions.
> Use material that is at least 19 mm thick for carcase construction.
> Ensure that the bottom is suitable for attaching the securing brackets.
> Secure foldaway beds with provided securing brackets to prevent tilting.
1780 incl. foot
1780 incl. foot
approx. 320 slatted frame upper edge
approx. 320 slatted frame upper edge
Resilient wooden slat pockets
Support degree regulation
CENTRE SUPPORT
> Ensure that the wall surface is suitable for attaching the securing brackets.> Secure foldaway beds with securing brack-
ets to prevent tilting.
BED FITTINGS
BED-LIFTSINGLE-SIZE With slatted frame
Packing: 1 set
Version Cat. No.Without mattress 271.91.114With hyperflex mattress 271.91.113
> Material: Torsion-free tubular steel frame, laminated wood slats and rubber caps
> Colour: Anthracite frame, natural wood slats > Version: With gas filled struts for easy opening
and closing, with automatic foot mechanism and mattress retainer
> Slatted frame: With 28 wooden slats mounted in flexible pockets with cushioning support, with shoulder comfort zone, with 5 central zone reinforcing slats and centre strap, continuously adjustable support degree regulation
> Installation: Quick fixing system (bearing plates, gas filled strut, pre-mounted foot linkage)
> With LGA quality certificate
Supplied with: > 2 Securing brackets > Bedding Straps > 1 Set of installation instructions
Note:Bed weight: The gas filled struts are designed to accompany a 19 mm particle board front with a weight of approximately 28 kgs, and a mattress weighing 20-27 kgs (the bed-lift will not operate properly unless these two ratings are adhered to.)Automatic foot mechanism:Angular feet automatically come out when the bed is opened and are retracted when the bed is closed again.
> Area of application: Connecting two single beds to make a double bed
> Material: Steel > Finish: Powder-coated anthracite
Packing: 1 piece
Cat. No.271.87.101
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
32
> Ensure that the wall surface is suitable for attaching the securing brackets.> Secure foldaway beds with securing
brackets to prevent tilting.
BED FITTINGS
DUOLETTO SIDE MOUNTED FOLDAWAY BEDWith slatted frame
> Application: Individual and / or bunk beds, guest room
> Capacity (kg): 100 > For mattress size (mm): 900 x 2000 (W x L) > Bed weight (kg): 55-85 > Material: Frame: steel tube with wooden slats > Surface: Powder coated white RAL 9016 > Execution: With gas struts for easy operation > Installation: Quick fixing system (bearing plates,
gas filled struts) > Internal cabinet
width (mm): 2060 > Internal cabinet depth: 400 including front panel > Rear wall
thickness (mm): ≥15 > Side-wall
thickness (mm): ≥ 22 > Dimensions (mm): Panel height: 990,
Panel thickness: 15-16
Packing: 1 set
Version Cat. No.Without mattress 271.89.000With mattress 271.89.005
Supplied with: > 1 Folding bed > 1 Bearing plate > 2 Securing brackets > 3 Bedclothes securing belts > 1 Mattress retaining clip > 1 Installation instructions
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
33
BED FITTINGS
BED-LIFT INCLINED AND 90º OPENING
Packing: 1 set
For mattress size W x L (mm) Cat. No.900 x 2000 274.52.9111400 x 2000 274.52.913
> Material: Steel > Finish: Silver coloured > Area of application: Allows opening in inclined position and 90º
position
Supplied with: > 1 x Opening mechanism left and right > 1 x Cross bar > 2 x Gas-filled strruts > 2 x Supporting brackets and 2 fixing brackets > Fixing material
Note:Please order Sanobasic KF slatted frame and mattress separately.
SANOBASIC KF SLATTED FRAMEWITH ADJUSTABLE HEAD AND FOOT SECTIONS
Adjustable head section, shoulder comfort zone and flexible resilient wooden slat support
> Area of application: For latex, foam and pocket spring core mattresses
> Version: With shoulder comfort zone > Material: Frame and resilient wooden slats:
laminated timber, pockets: rubber > Slatted frame
support: With 28 resilient wooden slats in pockets, with pressure-distributing centre strap, 5 double central zone reinforcing slats, continuously adjustable hardness degree regulation.
> Dimensions: Frame height: 40 mm, Installation height: 50 mm Slat: 34 x 8 mm Slat spacing: 26 mm
Packing: 1 set
Dimensions. W x L (mm)
For mattress size W x L (mm)
Cat. No.
890 x 1960 900 x 2000 271.75.0141390 x 1960 1400 x 2000 271.75.017
Support for slatted frame (provided by customer)Bedding box height min. 260 mmBedding box length = slatted frame length + 50 mmBedding box width = slatted frame width + 30 mmX = optional
Support for slatted frame (provided by customer)Bedding box height min. 260 mmBedding box length = slatted frame length + 50 mmBedding box width = slatted frame width + 30 mmX = optional
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
34
Function:> Hook-in ladder is simply hooked on and off.> Hook-in ladder can be propped vertically
against the shelf without unhooking.
Hook-in height (mm) Clearance (mm) Number of steps Weight (kg) Cat. No.Without steps2000 - 2240 800 - 9.7 819.16.0012250 - 2490 880 - 10.6 819.16.0022500 - 2740 950 - 11.8 819.16.0032750 - 2990 1030 - 12.7 819.16.0043000 - 3250 1100 - 13.6 819.16.005With steps, beech2000 - 2240 800 8 16.9 819.16.0312250 - 2490 880 9 18.7 819.16.0322500 - 2740 950 10 20.8 819.16.0332750 - 2990 1030 11 22.6 819.16.0343000 - 3250 1100 12 24.4 819.16.035With steps, birch2000 - 2240 800 8 16.9 819.16.0812250 - 2490 880 9 18.7 819.16.0822500 - 2740 950 10 20.8 819.16.0832750 - 2990 1030 11 22.6 819.16.0843000 - 3250 1100 12 24.4 819.16.085
Packing: 1 piece
LADDER SYSTEMS
HOOK IN LADDERSTAINLESS STEEL
> Area of application: For library, hotel and residential areas > Material: Frame and step holders: Stainless steel
Steps: Birch or beech veneer plywood > Finish: Frame and step holders: Matt brushed
Steps: Clear lacquered > Version: With hook-in bracket to prevent
tipping with concealed step fixing step thickness 24 mm
> Installation: For hooking onto hook-in tube > Load bearing capacity: Up to approx. 150 kg
Note:Please specify the exact hook-in height as well as the catalogue number when ordering. Ladders are made to order. Please enquire for delivery time.
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
35
Hook-in height (mm) Clearance (mm) Number of steps Weight (kg) Cat. No.2000 - 2240 approx. 600 7 13 819.14.2122250 - 2490 approx. 650 8 16 819.14.2212500 - 2740 approx. 700 9 18 819.14.2302750 - 2990 approx. 750 10 21 819.14.2493000 - 3250 approx. 800 11 23 819.14.258
Packing: 1 piece
ning and ConstructionDimensional data not binding. We reserve the right to alter speci�cations without notice.
Hooks
Dimensions X (extension over top edge of hook-in tube) In retracted position = 130 mmIn withdrawn position = 20 mm
Hook-in height = dimension floor to centre of tube holder + 22 mm
LADDER SYSTEMS
HOOK IN LADDERSTAINLESS STEEL
> Area of application: For warehouse, workshop, hospital and laboratory areas
> Material: Frame: Aluminium Steps: Multiplex birch
> Finish: Frame: Powder-coated silver, RAL 9006 Steps: Clear lacquered
> Width: 400 mm with hook-in heights 3000 - 3250 mm: 450 mm
> Version: With hooks to prevent toppling > Installation: For hooking-in
Note:Please specify the exact hook-in height as well as the catalogue number when ordering.
Available on request:> Hook-in ladder with powder-coated frame in other RAL colours> Handrail (on one side or both)> Other hook-in heights
The hooks allow the sliding ladder being propped vertically against the shelf without the need of unhooking. Hook-in ladder is simply hooked on and off.
Ladders are made to order. Please enquire for delivery time.
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
36
LADDER SYSTEMS
LADDERHOOK IN TUBE
Note:Tube holder suitable for panel thickness of at least 19 mm.Mount tube holders at approx.800 mm intervals.
Packing: 1 piece
Dim. A (mm) Cat. No.2000 819.15.0203000 819.15.030
> Material: Stainless steel > Finish: Matt brushed > Version: Without drill holes
COVER CAP
Packing: 1 piece
Material Finish/colour Cat. No.Plastic Black 819.15.374Stainless steel Matt brushed 819.15.074
> Installation: For inserting into running tube
Packing: 1 piece
Cat. No.819.15.067
> Material: Solid beech
TUBE HOLDER
Packing: 1 piece
Cat. No.819.15.080
> Material: Stainless steel > Finish: Matt brushed
Supplied with: > Fixing material
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
37
IRONFIX IRONING BOARD
DRAWER MOUNTED
MountingMounting
DE
32
41637
max
. 19
In order to mount the ironing board at the same height as the worktop, the following measurements need to be followed:
Dimension D mm 20 30 40 50
Dimension E mm 86 76 66 66
WALL MOUNTED
326
185950
300
985
525
Front cover
595
140
365
950
300
Min. internal width362 – 500 mm
Min. Carcasedepth 500 mm
> Material: Steel fittings, cotton ironing board cover > Finish: Powder-coated white natural white and grey
stripe cover > Features: Collapsible ironing board pulls out
automatically with the opening of the drawer > Mounting: Screw fixing in cabinet
Packing: 1 piece
Cat. No.568.60.710
> Material: Steel fittings, Cotton ironing board cover, plastic front cover
> Finish: Powder-coated white, natural white and grey striped cover, white front cover
> Features: Collapsible, 180° rotatable to left or right, lockable, with or without front cover
> Mounting: Screw fixing to wall
Packing: 1 piece
Version Cat. No.
Without front cover 568.66.700With front cover 568.66.710
Supplied with: > 2 carcase tracks > 1 Folding fitting with pre-mounted 2-part runners and
collapsible ironing board > 1 set fixing materials > 1 installation and usage guide
Supplied with: > 1 set fixing materials > 1 installation and usage guide
HÄFELE – LIVING AND BEDROOM SOLUTIONS / 07.16
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
38
WARDROBE SECURITY
HOME SAFE
Finish Cat. No.Black 836.26.391
Packing: 1 piece
Supplied with: > 2 Overide keys
> Features: Basic security with 1.5 mm steel walls and 4mm steel door Handle operation mechanism Solenoid lock system Key pad with LED light indicator, opening with combination of 3 - 6 digits Mechanical overide key Felt inner floor
> Fixing: Bolts to floor or wall > Finish: Black > Dimensions (mm): 310 x 200 x 200 (W x H x D)
Finish Cat. No.Black body, silver handle 836.26.330
Packing: 1 piece
Supplied with: > 2 Overide keys
> Features: 2 mm steel wall and 6 mm steel door Electronic keypad operation Guest code: 3 - 6 digits Administrator code: 3 - 6 digits Blue LED display and backlight button Automatic opening driven by micro motor Internal LED light Mechanical overide key Felt inner floor
> Fixing: Bolts to floor > Finish: Black body, silver handle > Dimensions (mm): 400 x 195 x 410 (W x H x D)
HOTEL SAFE
IRONFIX IRONING BOARD
LATERAL MOUNTED
> Material: Steel fittings, cotton ironing board cover > Finish: Powder-coated white, white and grey striped
cover > Features: Collapsible, 180º rotatable with positioning at
15º intervals pre-mounted > Dimensions: 350 x 125 x 520 mm (D x H x W) > Mounting: Screw fixing to shelf > Min. installation
width (mm): 568 internal (600 mm cabinet width)
Cat. No.568.60.780
Packing: 1 piece
Supplied with: > Ironing board > Installation and usage guide
Dim
ensi
ons
in m
m D
imen
sion
al d
ata
not b
indi
ng, i
mag
es a
re fo
r illu
stra
tive
purp
oses
onl
y. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
39
INDEX
271.271.65.040............................ 30271.75.014............................ 33271.75.017............................ 33271.87.101............................ 31271.89.000............................ 32271.89.005............................ 32271.91.113............................ 31271.91.114............................ 31271.92.132............................ 30
274.274.52.911............................ 33274.52.913............................ 33
403.403.90.000.............................. 4403.90.001.............................. 4403.90.011.............................. 4
504.504.68.613............................ 37504.68.615............................ 37504.68.623............................ 37
540.540.14.711............................ 19540.14.712............................ 19540.14.713............................ 19540.14.721............................ 19540.14.722............................ 19540.14.723............................ 19540.14.731............................ 19540.14.732............................ 19540.14.733............................ 19
541.541.70.260............................ 19541.70.261............................ 19541.70.265............................ 19541.71.260............................ 19541.71.261............................ 19541.71.265............................ 19541.72.260............................ 19541.72.261............................ 19541.72.265............................ 19541.78.841............................ 19
544.544.43.210............................ 20544.43.757............................ 20544.43.766............................ 20
547.547.43.300............................ 12547.43.302............................ 12547.43.305............................ 12547.43.390............................ 12547.43.391............................ 12547.52.221............................ 21547.52.222............................ 21547.52.223............................ 21547.52.224............................ 21547.52.226............................ 21547.52.621............................ 21547.52.622............................ 21547.52.623............................ 21547.52.624............................ 21547.52.626............................ 21
563.563.40.341............................ 18
568.568.60.710............................ 38568.66.700............................ 38568.66.710............................ 38
801.801.08.704............................ 27801.08.904............................ 27801.14.702............................ 27801.19.200............................ 28801.19.201............................ 28801.19.220............................ 28
801.39.212............................ 27801.39.232............................ 27801.39.232............................ 28801.39.242............................ 27801.39.252............................ 27801.54.233............................ 29801.55.233............................ 29801.59.232............................ 27
802.802.05.291............................ 28802.09.203............................ 29802.09.205............................ 29
803.803.01.250............................ 29803.01.252............................ 29803.01.270............................ 29803.06.203............................ 29803.06.205............................ 29803.33.725............................ 27803.33.757............................ 27803.34.200............................ 27
804.804.30.403............................ 29804.31.107............................ 29804.31.214............................ 29804.31.509............................ 29804.31.518............................ 29804.32.006............................ 29804.32.015............................ 29
805.805.20.324............................ 25805.20.331............................ 25805.20.355............................ 25805.20.424............................ 25805.20.431............................ 25805.20.455............................ 25805.20.525............................ 25805.20.532............................ 25805.20.557............................ 25805.20.724............................ 25805.20.731............................ 25805.20.755............................ 25805.20.905............................ 25805.20.906............................ 25805.20.907............................ 25805.21.300............................ 26805.21.310............................ 26805.21.901............................ 26805.21.911............................ 26805.24.961............................ 25805.25.100............................ 24805.25.101............................ 24805.25.200............................ 24805.25.201............................ 24805.25.300............................ 24805.25.301............................ 24805.25.700............................ 24805.25.701............................ 24805.29.300............................ 26805.29.901............................ 26805.58.231............................ 13805.58.233............................ 13805.58.235............................ 13805.58.330............................ 13805.58.331............................ 13805.58.931............................ 13805.58.933............................ 13805.58.935............................ 13805.67.905............................ 14805.67.915............................ 14805.81.063.............................. 9805.81.064.............................. 9805.81.065.............................. 9805.81.066.............................. 9805.81.074.............................. 9805.81.075.............................. 9805.81.076.............................. 9805.81.077.............................. 9805.81.164.............................. 9805.81.165.............................. 9805.81.166.............................. 9805.81.167.............................. 9805.81.174.............................. 9
805.81.175.............................. 9805.81.176.............................. 9805.81.177.............................. 9805.81.190.............................. 9805.81.690.............................. 9805.82.120.............................. 7805.82.200.............................. 7805.83.101.............................. 6805.83.102.............................. 6805.83.103.............................. 6805.83.105.............................. 6805.83.121.............................. 6805.83.122.............................. 6805.83.123.............................. 6805.83.125.............................. 6805.83.350.............................. 8805.83.360.............................. 8805.83.370.............................. 8805.83.481.............................. 7805.83.482.............................. 7805.83.483.............................. 7805.83.484.............................. 7805.83.491.............................. 7805.83.492.............................. 7805.83.493.............................. 7805.83.494.............................. 7805.83.750.............................. 8805.83.760.............................. 8805.84.101.............................. 6805.84.102.............................. 6805.85.331.............................. 6805.85.332.............................. 6805.85.333.............................. 6805.85.334.............................. 6805.85.335.............................. 6805.85.731.............................. 6805.85.732.............................. 6805.85.733.............................. 6805.85.734.............................. 6805.85.735.............................. 6805.87.210............................ 21805.87.910............................ 21805.87.993............................ 21
806.806.09.243............................ 11806.09.244............................ 11806.09.253............................ 11806.09.254............................ 11806.09.273............................ 11806.09.274............................ 11806.10.245............................ 11806.10.246............................ 11806.10.265............................ 11806.10.266............................ 11806.10.590............................ 11806.10.595............................ 11806.10.597............................ 11806.10.767............................ 11806.10.768............................ 11806.10.900............................ 10806.10.913............................ 11806.10.915............................ 11806.22.300............................ 18806.22.301............................ 18
807.807.16.203............................ 17807.20.743............................ 17807.21.930............................ 16807.21.950............................ 16807.22.931............................ 16807.22.951............................ 16807.25.930............................ 16807.25.935............................ 16807.25.950............................ 16807.25.955............................ 16807.41.206............................ 17807.41.210............................ 17807.41.211............................ 17807.45.030.............................. 8807.45.330.............................. 8807.46.030.............................. 9807.46.330.............................. 9807.47.020.............................. 9807.47.320.............................. 9807.48.120.............................. 8
807.49.302.............................. 8807.49.310.............................. 8807.49.390.............................. 7807.52.231............................ 12807.52.233............................ 12807.52.235............................ 12807.52.931............................ 12807.52.933............................ 12807.52.935............................ 12 807.54.231............................ 15807.54.233............................ 15807.54.931............................ 15807.54.933............................ 15807.54.934............................ 15807.67.425............................ 14
808.808.71.403............................ 14
811.811.08.300............................ 23811.08.301............................ 23811.08.303............................ 23811.08.309............................ 23811.15.502............................ 23811.15.503............................ 23811.15.504............................ 23811.15.505............................ 23811.17.303............................ 22811.17.303............................ 22
819.819.14.212............................ 35819.14.221............................ 35819.14.230............................ 35819.14.249............................ 35819.14.258............................ 35819.15.020............................ 36819.15.030............................ 36819.15.067............................ 36819.15.074............................ 36819.15.080............................ 36819.15.374............................ 36819.16.001............................ 34819.16.002............................ 34819.16.003............................ 34819.16.004............................ 34819.16.005............................ 34819.16.031............................ 34819.16.032............................ 34819.16.033............................ 34819.16.034............................ 34819.16.035............................ 34819.16.081............................ 34819.16.082............................ 34819.16.083............................ 34819.16.084............................ 34819.16.085............................ 34
836.836.26.391............................ 39836.26.391............................ 39
891.891.21.593............................ 23
892.892.11.300............................ 20892.11.901............................ 20892.12.906............................ 20892.12.906............................ 20892.12.990............................ 20892.12.990............................ 20892.14.728............................ 20892.14.737............................ 20
944.944.02.092.............................. 4944.02.093.............................. 4944.02.094.............................. 4944.02.095.............................. 4944.02.096.............................. 4944.02.097.............................. 4944.02.098.............................. 4944.02.099.............................. 4
732.04.649 LIVING AND BEDROOM SOLUTIONS - 07.2016
Häfele Australia Pty. Ltd. | 8 Monterey Road | Dandenong | Victoria 3175Phone: 1300 659 728 | Fax: (03) 9212 2001 | Email: [email protected] | www.hafele.com.au
Häfele New Zealand Ltd. | 16 Accent Drive | East Tamaki | Auckland 2013Phone: 0800 442 335 | Email: [email protected] | www.hafele.co.nz
HÄFELE LOCATIONS:
Australia I MELBOURNE I SYDNEY I NEWCASTLE I BRISBANE I ADELAIDE I LAUNCESTON I HOBART I PERTH
New Zealand I AUCKLAND I WELLINGTON I CHRISTCHURCH