live demo using smartpss on pc or mac - cctv security pros · 2018. 11. 28. · live demo using...
TRANSCRIPT
Please download the latest version of SmartPSS from our website found in the link below.
PC Download: https://www.cctvsecuritypros.com/content/pages/software/573285-General-SmartPSS-ChnEng-Win32-IS-V2-02-0-R-171124.zip
Mac Download: https://www.cctvsecuritypros.com/content/pages/software/473591-General-SmartPSS-Eng-Mac-IS-V2-00-0-R-20170120.pkg.zip
Once the Software is downloaded you may proceed with the installation.
After the installation you will need to Add the Device into SmartPSS. Add the device by clicking on the Add Button at the top left corner.
Live Demo Using SmartPSS on PC or Mac
Add our Demo Device in by copying the info seen in the picture below. Once all the information is copied you may click the Add button at the bottom. Use the following username and password combination. Be sure to enter the IP address of our Demo
found below ( 72.82.144.138 )
Username: guestPassword: guest1234
The Demo Device will show an Online Status within a few seconds.
Once the device is online you can Navigate to the live view section of SmartPSS.
Double click on the camera you wish to view on the left column, or drag and drop cameras to the window of your choice.
You may change your window view count at the bottom right hand corner of the screen. Below is an example of a 9 camera view.
Our knowledgeable and helpful Sales department is only a phone call or email away. If you have any questions about customizing or ordering your new Surveillance system we
encourage you to contact us right away!
(888)653-2288 Extension [email protected]