literature tools productline rev02 - sullivan-palatek...sullivan-palatek, inc. es us wa m cy in...
TRANSCRIPT
-
Dependable by design.TM
PNEUMATIC TOOLSFULL LINE
-
PNEUMATIC TOOL LINE
PAVING BREAKERS «The line of paving breakers include 30, 40, 60, and 90 pound “T” handle tools, all with industry standard chuck sizes. They are all built from a proven market design, 4 bolt back heads, heavy-duty side rod bolts and springs, forged alloy construction with removable chucks. Internal oilers on the 30, 60 and 90 pound breakers.
CHIPPING HAMMERS «The full line of 15 pound class Chippers can come with open handles and thumb triggers, heavy-duty “D” style 4-bolt handles with Internal Triggers or Thumb Triggers. The open handle is forged and is machined from high The 4-bolt chipper is machined from high alloy steel, piston is high shock tool steel and a cast “D” handle with an internal trigger or external Thumb Trigger. The 4 bolt Chippers are now available with a screw-on fine thread, Universal Ball Retainer (no retainer springs needed). All are available with either .680 Round or .580 Hex chucks.
BACKFILL TAMPER «The tamper cylinders are precision ground from alloy steel and have an internal oiler. They come with a 6” hollow cast iron butt and can be used with a variety of different optional tamping butts.
ModelNet
Weight Length Bore StrokeBlows per
MinuteChuck Size
Air Inlet
Air Consumption
lbs inch inch inch bpm inch inch cfm
SPB-90-4 92.5 28.75 2.625 6.0625 1250 1 1/4 x 6 3/4 75
SPB-90-8 92.5 26.75 2.625 6.0625 1250 1 1/8 x 6 3/4 75
SPB-60-4 67 25.625 2.25 4.0937 1400 1 1/4 x 6 3/4 59
SPB-60-8 67 25.625 2.25 4.0937 1400 1 1/8 x 6 3/4 59
SPB-40-1 42 25.125 1.73 5.75 900 1 x 4 1/4 1/2 56
SPB-30-1 34 22.5 1.75 3.375 1550 1 x 4 1/4 3/8 49
SPB-30-7 34 22.5 1.75 3.375 1550 7/8 x 3 1/4 3/8 49
ModelNet
Weight Length Bore StrokeBlows per
Minute Chuck Size Air InletAir
Consumption
lbs inch inch inch bpm inch inch cfm
SCHO-2 H 13 14 1.125 2 2300 .580 Hex 3/8 29.75
SCHO-2 R 13 14 1.125 2 2300 .680 Rnd 3/8 29.75
SCHO-3 H 14 15.25 1.125 3 2200 .580 Hex 3/8 31.5
SCHO-3 R 14 15.25 1.125 3 2200 .680 Rnd 3/8 31.5
SCHO-4 H 15 17 1.125 4 1800 .580 Hex 3/8 33.23
SCHO-4 R 15 17 1.125 4 1800 .680 Rnd 3/8 33.23
SCH-2 H 13 14 1.125 2 2300 .580 Hex 3/8 29.75
SCH-2 R 13 14 1.125 2 2300 .680 Rnd 3/8 29.75
SCH-3 H 14 15.25 1.125 3 2200 .580 Hex 3/8 31.5
SCH-3 R 14 15.25 1.125 3 2200 .680 Rnd 3/8 31.5
SCH-4 H 15 17 1.125 4 1800 .580 Hex 3/8 33.23
SCH-4 R 15 17 1.125 4 1800 .680 Rnd 3/8 33.23
SCH-11 H 11 16.5 1.125 2.375 2550 .580 Hex 3/8 15.8
SCH-11 R 11 16.5 1.125 2.375 2550 .680 Rnd 7/8 15.8
ModelNet
Weight Length Bore StrokeBlows per
Minute Chuck SizeAir
InletAir
Consumption
lbs inch inch inch bpm inch inch cfm
SBT-6 40 48.25 1.5 5.5 800 .804 1/2 38.5
-
SPIKE DRIVERS «Railroad spike drivers are the same design as the standard paving breakers and have a special forged alloy striking dolly with an additional grease fitting for lower end lubrication. The SSD-60 is for used or seasoned ties and the SSD-90 is for new or green ties.
ROCK DRILLS «The Sullivan-Palatek line of drills are available from 20-60 pounds and a large variety of chuck sizes. The SRD-75 is a heavy quarry drill suitable for drilling granite and available in two chuck sizes. The drill that can be used on high psi concrete it is a proven Toyo design and is available in two chuck sizes. The SRD-50 is heavy construction drill and for medium hard rock and is available in three chuck sizes. The SRD-30 is a light construction drill, high speed and has excellent flushing characteristics making it an excellent construction drill and soft rock quarry drill. All of these drills are available with an optional wet kit for dust suppression. The SRD-20 is a light construction shallow hole drill for con-crete, anchors, and collaring holes. The “D” handle allows easy use in horizontal positions.
RIVET BUSTERS «Are made with a durable premium alloy machined cylinder that is stepped internally. This safety “bridged” design prevents the piston from exiting the bottom end of tool. A Replaceable Auto Valve extends tool operation life without expensive valve repairs. Tools come standard with a screened inlet, urethane bumpers and hardened sleeves for extended wear life on the job and all utilize 11 X Jumbo steel.
ModelNet
Weight Length Bore StrokeBlows per
Minute RPMChuck Size
Air Inlet
Air Consumption
lbs inch inch inch bpm inch inch cfm
SRD-75-14 61 23.75 2.625 3.22 2250 200 1 X 4 1/4 3/4 98
SRD-75-74 61 23.75 2.625 3.22 2250 200 7/8 X 4 1/4 3/4 98
SRD-60-14 59 24 2.625 2.5 1800 200 1 x 4 1/4 3/4 98
SRD-60-74 59 24 2.625 2.5 1800 200 7/8 x 4 1/4 3/4 98
SRD-50-14 51 20.5 3 2 2300 180 1 x 4 1/4 3/4 92.2
SRD-50-74 51 20.5 3 2 2300 180 7/8 x 4 1/4 3/4 92.2
SRD-50-73 51 20.5 3 2 2300 180 7/8 x 3 1/4 3/4 92.2
SRD-30-74 29 19.5 2.4375 1.4375 2700 240 7/8 x 4 1/4 3/4 73
SRD-30-73 29 19.5 2.4375 1.4375 2700 240 7/8 x 3 1/4 3/4 73
SRD-20-73 16.5 19 1.9375 1.89 2900 7/8 x 3 1/4 3/8 36
SRD-20-74 16.5 19 1.9375 1.89 2900 7/8 x 4 1/4 3/8 36
SRD-9 9 15 1.25 1 3400 Spline 3/8 20
ModelNet
Weight Length Bore StrokeBlows per
MinuteChuck Size
Air Inlet
Air Consumption
lbs inch inch inch bpm inch inch cfm
SRB-6 23 17 1.418 2.75 1560 11 x JUMBO 7/8 40
SRB-8 30 22 1/2 1.1875 8 1140 11 x JUMBO 1/2 44
SRB-11 33 25 1/2 1.1875 11 850 11 x JUMBO 1/2 50
ModelNet
Weight Length Bore StrokeBlows per
Minute Chuck Size Air InletAir
Consumption
lbs inch inch inch bpm inch inch cfm
SSD-90 89.5 26.5 2.625 6.0625 1250 n/a 3/4 75
SSD-60 64 24.5 2.25 4.0937 1400 n/a 3/4 59
PNEUMATIC TOOL LINE
-
Sullivan-Palatek, Inc.1201 West US Highway 20Michigan City, IN 46360
219.874.2497 sullivan-palatek.com [email protected]
Specifications and designs are subject to change without notice. Machines may be shown with optional equipment. 118-(REV 009)-4/2020
COMPRESSOR PRODUCT LINE
ElectricConstructionCompressors
Aftercooler/DryerSkid Packages
Utilities110-260 CFM
PORTABLE DIESEL COMPRESSORS110-1800 CFM, Up to 500 psi
INDUSTRIAL ELECTRIC COMPRESSORS1-450 HP, Up to 450 psi