UD-SERIES40-50 HP \ UPDRAFT MODELS \ INDUSTRIAL ELECTRIC COMPRESSORS

UD-40, 40 HP \ UD-50, 50 HP

*Shown with optional enclosure

Dependable by design.TM

Sullivan-Palatek, Inc.1201 West US Highway 20Michigan City, IN 46360

219.874.2497 sullivan-palatek.com info@palatek.com

Specifications and designs are subject to change without notice. Machines may be shown with optional equipment. 139-(REV 004)-4/2020

SPECIFICATIONS » T1 Microprocessor - Program daily schedule to suit plant requirements

» Electric Motor - 460/575/3/60 standard (208/230/3/60 and 380/415/50 optional on most models)

» Motor Starter - Full voltage magnetic starter with 120 volt controls, NEMA 1, NEMA 4, Wye Delta, VFD - Optional

» Protective Devices - Class 20 Solid State overload relay, anti reverse, high temperature and high pressure shutdown switchs

» Lube Fill & Level Elbow - One piece fluid fill elbow and level indication sight glass

» Separator Tank - ASME coded 200PSIG tank, relief valve, minimum pressure/check valve

» Cooling System - Cooling system with dedicated fan motor, large side by side lube cooler and aftercooler

» Air Intake Filter - Heavy duty dry type with easily replaceable elements

» Inlet/check valve - One piece housing for dependable performance and complete modulation

» Coupling & Drive - Compressor is flange mounted to motor C-face for positive alignment and direct driven

» Controls - 0-100% modulation, solenoid controlled for smooth lowest possible no load power

FEATURES

Model UD-40 UD-50

Capacity @ 125 psi* cfm 160 184

Motor hp (kW) 40 (30) 50 (37)

Fan Motor Output hp (kW) 1 (.7) 1 (.7)

Sump Capacity gallons (liters) 3.5 (13.2) 3.5 (13.2)

Discharge NPT inches 1 1/4 1 1/4

Length inches (mm) 66 (1,676) 66 (1,676)

Width inches (mm) 34 (864) 34 (864)

Height inches (mm) 48 (1,219) 48 (1,219)

Weight pounds (kg) 1,050 (476) 1,215 (551)

Weight/Enclosed pounds (kg) 1,350 (612) 1,515 (687)

*Available from 100-175 psi, please consult factory for additional pressures.

« Air Compressor shown with standard open configuration and optional T1 Microprocessor.

« Updraft design allows hot air to be recovered or exhausted thru top of the machine

Dedicated fan motor and side » by side lube cooler and air cooled

aftercooler for easy cleaning

« C-Face motor for positive alignment

COOLING SYSTEM