liquidation sale - uen.hsix.comuen.hsix.com › brochure › 005618.pdf · ¥ siemens avg system...

Featuring new and very late model machineryand equipment. First cost over 15 million dollars. Certain Original EquipmentManufacturers will pass new equipment warranties directly to buyers.

Liquidation Sale Liquidation Sale

New Never Installed!Waldrich Siegen CNC Lathes79"/75" (2/1.9 m) x 600" (15.2 m)

New Never Installed!(2) 315-Ton Ross PressesModel 315 R1M2S8¥ Rowe Coil Handling ¥ Taylor-Winfield Inline

Stackers / Feeders¥ Timesaver Sheet

Sanders

New Never Installed!7 New Fanuc RobotsR-2000-i 200F and S-430-iW

FIND INSIDE:Most new or less than 2 years old!¥ Locomotive¥ Autoclaves & Ovens¥ Machine Shop and

maintenance Equipment¥ Paint Booth with Air Handling¥ 400-Ton Positioning Rolls¥ Material Handling, Electric Tugs

and Pallet Trucks¥ Siemens AVG System Including

(2) Model DC-30 Guided Vehicles ¥ 400-Ton SES Transfer Car¥ NEW OEM Parts, Light Curtains,

Wire Ways, Transformers and MORE!

Call Casey Mulqueen, CEA203-227-2808

Fax: [email protected]

P.O. Box 3450Westport, CT 06880

ManyBrand New!

s

Save 30%-60% and more!Save 30%-60% and more! SEE INSIDE

SEE INSIDE

First cost over 15 million dollars.

2Call Casey Mulqueen, CEA 203-227-2808 Fax: 203-222-0128

[email protected] • www.solutionsforindustry.comP.O. Box 3450, Westport, CT 06880

Type DH 2200/100-12x15, 500-1 Serial Numbers 13.184 and 13.185

Machine capacity: • Swing over bed 79" (2 meters)• Swing over carriage/cross slide 75" (1.9 meters)• Distance between centers 600" (15.2 meters)• Max. weight of work, unsupported 100 tons

Equipped as follows:• 4-Way Bed Design• 2 Hydraulic Work Rests, Programmable• Tail Stock with Power Traverse• 72" Dia. Face Plate (accepts top jaws)• 150 HP DC Spindle Drive• Spindle Speeds 1 to 163 RPM• Chip Conveyor and Coolant• Way Guards• Fanuc 16T Control with Heidenhain

Linear Feedback Scales

2 – New Waldrich Siegen Heavy-Duty CNC Roll Lathes79"/75" (2/1.9 meters) x 600" (15.2 meters)

Save 30%or More!

Save 30%or More!

Views of Waldrich Siegen Heavy-Duty CNC Roll Lathes in Assembly Hall

Brand New!Still in Crates!

Call Casey Mulqueen, CEA 203-227-2808 Fax: [email protected] • www.solutionsforindustry.com

P.O. Box 3450, Westport, CT 068803

1 – Used Innocenti TVM – 450/S – 63/30 Vertical Turning with Milling & Drilling 1976

Machine capacity: • Table load capacity 300 Tons

External machining capacity:– Max. turning/milling dia. 378" (9600mm)– Min. turning/milling dia. w/tool

extension 88" (2235mm)– Lower limit above table, min. turning/

milling height 25.6" (650mm)– Upper limit above table, max. turning/

milling height 340.5" (8650mm)

Internal turning capacity:Features a center column for internal turning– Max. turning dia. 240" (6100mm)– Min. turning dia. 88" (2235mm)– Upper limit above table, max. turning

height 252.4" (6410mm)

Equipped as follows:Arranged for operation under computer numerical control. Requires new controls.

• Table Dia. 248" (6300mm) on slide w/C-Axis control positioning

• Spindle attachment for milling & drilling w/#50 taper

• Spindle Dia.12" (305mm) w/#60 Taper• Spindle Speeds 1.2 to 600 RPM• 50 HP Spindle Drive, 125 HP Table Drive

WANTEDCNC Vertical Turning Table diameter 8 m (315")C-axis with milling and drilling 250-ton capacity Max. turning 12 m (472") Max. height 5 m (197")

CNC Horizontal BoringY-Axis=4 meters (157")X-Axis=6 meters (236")Z-Axis=1.5 meters (59") Table 3 m (118") x 3 m (118") 35-ton capacity Customer requires four machines

Views ofInnocentiTVM Ð 450/SÐ 63/30VerticalTurning and MillingMachine



55-Ton Shop PressScottsman 65-Ton IronworkerModel 6509-24M

Harig Surface Grinder618 Hand Feed, s/n B-10558W

Never Installed!

Oster Pipe Threader582-A, s/n ABC502,Speeds 22-58, Cap1/4" - 2-1/4"

25

Marvel Series 8 Universal Vertical Band SawModel Mark II, s/n 829062, 2001

6" x 60" Max. Horizontal-Vertical Belt Sander

Tannewitz Vertical Band SawGHE, s/n 21012, 2001

(1) Used 36" x 36" x 96" MattisonHorizontal Surface Grinder

s/n 20892, 1963, Reconditioned 2001 • (2) 36" x 48" Electro-Magnetic Chucks • 50 HP Spindle Drive• Incremental Downfeed• Rapid Traverse• Wheel Dresser• Coolant with Magnetic Separator

Need anAppraisal?We specialize ininternational

assignments.

Mattison Surface Grinder

NEW!2001

2001

4

(1) Used Sass Model TRPS-4000CNC Track-Type Radial Drill

s/n 2437, 1968, Reconditioned 2002 • Column diameter 35.43"• Max. Drill Radius 177"• Max. Height Spindle Nose to Floor179.50" • Base travel X-Axis 35'• Spindle speeds 7 to 660 RPM, 40 HP• Fanuc Programmable Logic Controller



New Stokes Vacuum System

(1) Used EMD SW9 120-Ton Diesel Locomotive, Reconditioned2001, including rebuilt 12-567BCdiesel engine.

400-Ton Explosion Proof Transfer Car, delivered9/2001; 12'-6" x 36' deck; (16) 21" dia. wheels; (2) 20 HPdrive motors; max. speed 50 FPM; designed to ride on175#/yd. rail with 10'-4-1/4" centers

(4) Empire Model PF-3648Modified “Profinish” MediaBlast Systems, each including36" x 48" blast cabinets, mediastorage, 900 CFM turntable re-claimer with hopper, CDC-9cartridge dust collector withsilencer (new cost $36,453.00 each)

(2) Optima Source CapturingSystems, 2001; 9' deep x 5'-5" wide x12' high; air recirculation capacity 7800CFM; 8 filters; primary, secondary, carbon and final filters; 5 HP blowers

(2) Optima Source CapturingSystems, Model 300/3001, 2002; 8'deep x 4' wide x 7' high; air recirculationcapacity 2400 CFM; pre-filter, carbon filter and final filter; 2 HP blower

Need an autoclave or additional liquidstorage capacity? Take advantage ofseller's initial investment in design,material and labor.

OPTION ONE:

Complete as Two – NewAutoclaves with Hodge Doors andStokes Vacuum SystemsEach autoclave currently in (3) majorpieces. 34' long cylinder w/head; 8'-4"long cylinder and door flange; doorflange and head. There are (4) saddleswhich are currently loose for each tank.• All parts designed for 160PSI/Full

vacuum at 400°F• Approximate capacity is 47,600 gal.• Shell diameter is 13'-2" I.D.• Shell material is Sa-516 gr.70• New Stoke Vacuum Systems with

Microvac Pumps Model 912-10 andPositive Displacement Blowers ModelSNV 110HV (one spare)

OPTION TWO:Complete as Storage TanksDimensions would be 13'-2" I.D. x 34'long straight shell. Nozzles could beadded per customer requirements. • Shell & heads are Sa-516 gr.70• Design 160PSI/FV @ 400°F• Approx. capacity is 39,000 gallons

OPTION ONE:

OPTION TWO:

Need an autoclave or additional liquidstorage capacity? Take advantage ofseller's initial investment in design,material and labor.

Bleeker Truck Style Paint Booth25' wide x 49' long x 31' high; 18' x 22'high automatic door; (2) LPI man lifts

(7) Sets 400-Ton Kokie-ArronsonTurning and Positioning Rolls, ModelWSI400, 2001; load cap. 400 ton; dia. range7' to 15'; fixed center distance 75"; wheelsize 20" diameter x 16-3/4" wide; speed 48 to.48 IPM; 15 HP 460 Volts

2001

2001

NEW!

2001

Huge savings of30%-60%or more!

5

NEW!



Brand New Machinery and Equipment to Punch, Finish Coat and Cure Silicon Steel Laminates

(2) 315-Ton Ross Presses Model 315-R1M2S8

Brand New, Never Installed!1-Year Warranty AvailableSerial Numbers 90-0026 and 90-0027

Machine capacity: • 315 Ton; Double Crank• Stroke 9.8"; Adjustment 4.3"; Shut Height 18"• Bed Area 49" x 78"; Ram Area 45.5" x 78"• Between Frames Left to Right 82";

Windows 35"

Equipped as follows:• Speed 15 – 30 SPM• 30 HP w/Air Clutch, Brake & Counter Balance• Hilma Quick Change Die System• Omni Link 5000 Automation Control System• Sound Dampening Doors

(2) Rowe Unwind (de-reeler) BGY-H-10-15(2) Rowe Leveler, Straightener, B30 (2) Rowe Push Pull Press Feed(2) Rowe Take-up (re-reeler) BGY-H-4-15

Rowe Coil Handling and Feed, 30" x 48" x .093", 10,000 lbs.

New, Never U

sed!!!

Rowe B30 Straightener

NEW!

Rowe Re-ReelerRowe Unwind

NEW!

Save 30%or More!

Save 30%or More!

6



ch, Finish Coat and Cure Silicon Steel Laminates

Taylor-Winfield AutomaticStackers & Feeders(2) Stackers(2) De-Stackers(2) Dual Stackers

Casso-Solar Gas Infrared Curing Oven

Ovens, Conveyorized Gas Fired w/Oxidation

(2) Casso-Solar Curing Gas Infrared(2) Casco-Solar Cooling(1) “Megec Millennium” Regenerative

Oxidizer

36" Timesaver Sheet SandersModel 337-11CM Dry1) Timesaver – Press (Note: one

was transferred)4) Timesaver – Coating

Black Bros Precision Roll Coaters(1) Model 240-62" Super 1175, s/n 314700 (Note: one was transferred)

Torit Dust Collectors, Model DFT4-32 and Model DFT4-16

Material Handling IncludingConveyors and Coil Storage WilliamsMaterial Handling Design (7) Rico WalkBehind Trucks (Product and Die Handling)

(3) Rico HLP-20 2,000 Capacity(2) Rico PLW-6o 6,000 Capacity(1) Rico RDHFP2T-160 8,000 Capacity(1) Rico R-CH-WR-100 10,000 Capacity

Rico HLP-20 Walk Behind Trucks

Need anAppraisal?We specialize ininternationalassignments.

7

Miller “Synchrowave” Welders

(6) 7-Axis Fanuc Robots R-2000-i 200F#F-51453, 51454, 51455, 51456, 50982, Max.Load 200 kg, RJ-3 Controls and linear way/railfor 7th Axis traverse available

6-Axis Fanuc Robot S-430-iWMax. Load 165 kg, #F-49406

TERMS & CONDITIONSTerms and conditions of this sale pages 1-12: SUBJECT TO PRIOR SALES OR WITHDRAWAL. THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, ON THE EQUIPMENT OFFERED HEREIN AND ALL EQUIPMENTIS OFFERED SUBJECT TO PRIOR SALE OR WITHDRAWAL, AS IS, WHERE IS; ALL WARRANTIES, EXPRESSED ORIMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE SPECIFICALLY EXCLUDED FROM THIS OFFERING. SELLER MAKES NO REPRESENTATIONS ORWARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF ANY DESCRIPTION OF THE EQUIPMENT.BUYER IS SOLELY RESPONSIBLE FOR VERIFYING THAT THE EQUIPMENT IS SUFFICIENT FOR BUYERÕS PURPOSES.

(5) Eldec Induction Heating Units

For brazing each including: • Eldec MFG 17 KW DA Induction Power

Supply Unit• Water Chilling Unit• Curing Induction Coil• Brazing Induction Coil• Complete w/spare parts kits (total

investment $69,125.00 per system)

BRAND

NEW!

Brand New OEM Parts and AccessoriesPurchased to complete installation of automated production line. Including lightcurtains, fencing/partitions,wire ways, transformers

Many Items Brand New!! Many Items Brand New!!

New Transformers Including:

(2) 45KVA, 600 x 240V, delta-delta(1) 75KVA, 600 x 240V, delta-delta(3) 225KVA, 600 x 240V, delta-delta(1) 112.5KVA, 600 x 240V, delta-delta(3) 015KVA, 480 x 240V, delta-delta(2) 500 KVA, 600 x 240V, delta-delta

NEW!

NEW!

NEW!



Save 30%-60% and More!Save 30%-60% and More!

(60) New Acorn Plates 5' x 8' x 5.5"

Need anAppraisal?We specialize ininternationalassignments.

Shop Blocks including 22" x 24" x 144", 24" x 39" x 61"

(1) New 30 kw Blue-M High Temperature OvenModel CW-9980-G-MP350; s/n CW-1311; Max. Temp704 C/1300 F; 48" Wide x 24" Deep x 36" High.

(2) Used Steelman Bake Ovens, 90KWModel 90 EBB, 480Volts; Max. Temp 260C;Serial Numbers P010129-30, 2001; 40"Wide x 66" High x 45" Deep

Cincinnati Industrial Oven

12' x 12' Electric w/Honeywell Controls, s/n C-900-C140, 1993, 150 kw, Operatingtemp. 250 C / 482 F

Koolpac 6' x 8' x 7'6" Cooler

s/n OIJ1400 CLR, Medium Duty; 36 to 42degrees F; 440/3/60

NEW!

NEW!

NEW! 2001



Siemens AVG System, with (2) Model DC-30 Vehicles & Controls

(2) Motrec Electric Tugs, T-248, s/ns 1015024, 1015025• (2) Tow Bars• (2) Exide Chargers, Model D3E2-24-550

(25) 10,000 lb. capacity 4-wheel carts, 12" wheels,48" wide x 144" long x 48" high. Most “Brand New”

(3) 1/2-Ton Spanco 301-05 Jib Cranes 24' reach,motorized traverse & 200 degree swing, Installed 2001

Advance Floor Sweeper and Washer, Model 2067,s/n 1259742, Propane, 318 Hours

(8) 2-Ton Zinter Traveling Jib Cranes

Some with collision avoidance. Drawings areavailable. Some ÒBrand NewÓ and someinstalled 2001• (2) s/n 0111 and 01112, 28' reach (photo)• (4) s/n 0221, 0222, 0219, 0220, 28' reach • (2) s/n 0223, 0224, 18' reach • (1) 10-Ton Spreader – 7' x 14'

Material Handling

2001

NEW!NEW!

2001

NEW!

Save 30%-60%and More!

Save 30%-60%and More!



Other Sales In ProgressBihler Model RM 30 Automatic Multi Slide with Bihler Controls4 Linear Slides, s/n 25765, 1994

33-Ton Waterbury Farrell Hydraulic Press3.9" stroke, s/n 240429/240567, 1984

Coil Handling & Feeds, PartsWashers, Degreasers and FinishingSanding, Vibratory Finishers

Thermal Basic Temper Oven

Type CBD-2-10, s/n 390-805, Electric, 900degrees, 60 KW, 24" wide conveyor, 6"height, 144" long, three zone with washing

LK CoordinateMeasuring MachineG80 45.21.16MV, s/n G8259, Installed 4-3-95, X=180", Y=80",Z=60", PH9A RenishawProbe w/Auto Changer,Rotary Table, PalletShuttle, Heidenhainmeasuring w/CupeMicro-processor,Climate ControlledEnclosures - $32,500

Agie Wire EDMMachineModel AgieCut 200 withAgiematic-C Control andRC123 Pendant, CoolantFiltration Unit DA15, X-Axis=15.75", Y-Axis=9.84", Z-Axis=9.84",Wire diameter .03-.30mm,s/n 28, 1986

(4) Cincinnati Milacron T305-Axis HorizontalMachining CentersTilting Spindle with U-AxisTooling, 4000 RPM, 32" x 23"Pallets, Shuttle Changer, X=40", Y=60", Z=62", 100Position Automatic ToolChanger, GE2000 CNCControls, 1986 - $24,500 Each

75-Ton Niagara E75,36" x 24" Bed, 6"Stroke, 3" Bolster, 4"Adjustment, 15" ShutHeight, 35-70 SPM, AirCushion and CounterBalance, s/n 51772,1981

Bihler GRM 50 Automatic Multi Slide With Bihler Controls, 3 Left Hand Slides, 1 Narrow Slide,25-Ton Press in #1 Position w/o Bolster, s/n 25766, 1995

BurgerXUM2000, 6-Slide 100-Ton StampingWith Programmable Machine Control and ToolMonitor, Quick Change Tooling System, Tooling toProduce Constant Tension Hose Clamps 17mm to55mm in Diameter x Stock Size 2.2mm thick x 15mmWide, Laser Clamp Roundness Tester, 1995

1995, Like New

Condition

1995

1995

1981

WANTEDCNC Vertical Turning Table diameter 8 m (315")c-axis with milling &drilling, 250 ton capacity Max. turning 12 m (472") Max. height 5 m (197")

CNC Horizontal BoringY-Axis=4 meters (157")X-Axis=6 meters (236")Z-Axis=1.5 meters (59") Table 3 m (118") x 3 m (118") 35 ton capacity Customer requires fourmachines

Need anAppraisal?We specialize inInternationalassignments.



Call Casey Mulqueen, CEA203-227-2808

Fax: [email protected]

P.O. Box 3450Westport, CT 06880

Appraisals¥ Fair Market ¥ Orderly Liquidation¥ Auction

Remarketing Services ¥ Market Coverage¥ Sale Management

Web-based Software Solutions ¥ Purchasing¥ Asset Tracking¥ Surplus Asset Sales

Featuring new and very late modelmachinery and equipment. First cost over 15 million dollars.Save 30%-60% and more!Save 30%-60% and more!

Liquidation Sale in Progress

Liquidation SaleFeaturing new and very late model machinery and equipment. First cost over 15 million dollars. CertainOriginal Equipment Manufacturers will pass new equipment warranties directly to buyers.

Liquidation Sale

New Never Installed!• 2 - 315-Ton Ross Double Crank Straight Side

Presses, Model 315-R1M2S8 Including RoweCoil Handling and Feed, Taylor-WinfieldInline Automatic Stackers / Feeder andTimesaver Sheet Sanders

• 2 - New Waldrich Siegen Heavy-Duty CNC Lathes, 79"/75" x 600"

• 7 New Fanuc Robots R-2000-i 200F and S-430-iW

Save30%-60%

or More!

FIND INSIDE

Most new or less than 2 years old!• Machine shop and

maintenance equipment• Paint booth w/air handling• 400-Ton Positioning Rolls• Locomotive• Autoclaves and Ovens• Material Handling; Electric

Tugs and Pallet Trucks• Siemens AVG System

(2) DC-30 Guided Vehicles • 400-Ton SES Transfer Car• Brand new OEM parts; light

curtains, wire ways, trans-formers and more!

• Other sales featuring:- Bihler GRM50 & RM50- Burger XUM2000

Most new or less than 2 years old!

First cost over 15 million dollars.

- Bihler GRM50 & RM50- Burger XUM2000

liquidation sale - uen.hsix.comuen.hsix.com › brochure › 005618.pdf · ¥ siemens avg system...

Documents