liquid dosage forms part i. all liquid dosage forms are dispersed systems in which medical substance...

30
LIQUID DOSAGE FORMS LIQUID DOSAGE FORMS PART I

Upload: coleen-small

Post on 16-Dec-2015

218 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

LIQUID DOSAGE FORMSLIQUID DOSAGE FORMS PART I

Page 2: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out the external phase. Medical substances in liquid dosage form can be in the different aggregate states: solid, liquid and gas.

Page 3: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Physical and chemical Physical and chemical systems:systems:

real solutions colloid solutions suspensionsemulsionsinfusions, decoctions, extracts and other.

Page 4: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out
Page 5: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out
Page 6: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Solution is a Solution is a homogeneous mixture composed of two or more substances. composed of two or more substances. In mixture, In mixture, solute is dissolved in is dissolved in another substance, known as a another substance, known as a solvent..

Page 7: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Liquid Liquid dosagedosage forms can be forms can be classified classified

by medical aplication: for internal use - ad usum іnternum for external use - ad usum externum for injection - pro іnjectіonіbus.

Page 8: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Liquid dosage forms for internal use name usually mixtures (from the Latin word of mіxturae - to mix up), the disperse phase - water (only). They are measured out to the patients independently by spoons (table (soup)-spoon - 15 ml, dessert-spoon - 10 ml, tea-spoon – 5ml.).

Page 9: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

By composition

Simple- solutions which include only one substance.Multiple- solutions which include a few ingredients.

Page 10: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

By nature of solvent.

Hydrogen'snon-aqueous (alcoholic, glycerin, oily).

Page 11: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

BASIC TECHNOLOGICAL BASIC TECHNOLOGICAL OPERATIONS OPERATIONS FOR FOR

PREPARATION LIQUID PREPARATION LIQUID DOSAGEDOSAGE FORMS FORMS

Page 12: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Preparation of liquid Preparation of liquid dosage dosage forms consists of the forms consists of the followings stages:followings stages:

1. Selection of bottles and corks.2. Weighting of medical substances.3. Measurement of solvent.4. Dissolution.5. Percolation or filtration.6. Packing.

Page 13: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Nomenclature of the concentrated solutions Nomenclature of the concentrated solutions which use for preparation mixtureswhich use for preparation mixtures

5 % solution (1:20) sol. Natrii hydrocarbonatis 10 % solutions (1:10) are sol. Natrii benzoates,

sol. Coffein natrii-benzoatis.20 % solutions (1:5) are sol. Natrii bromidi, sol.

Kalii bromidi, sol. Natrii iodidi, sol. Kalii iodidi, sol. Natrii chloridi, sol. Kalii chloridi, sol. Calcii chloride, sol. Hexamethylentetramini, sol. Cloralii hydrati, sol. Natrii salicylati.

25 % solution (1:4) sol. Magnii sulfati.

Page 14: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

For example, it is necessary to prepare 1 L 20% solution of Kalii

bromidi.

All calculations can be conducted by two methods:account the density of this solution

account the coefficient of increase of volume

Page 15: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Account the coefficient of increase of volume :Quantity of water for preparation of the concentrated solutions, can be expect using the coefficient of increase of volume. The coefficient of increase of volume (CIV) is coefficient, which shows an increase of the volume of solution at dissolution of a 1,0 gram of solid substance.For Kalii bromidi CIV is 0,27. Then 200,0 g of Kalii bromidi at dissolution will occupy a volume 54 ml.

V= 0,27*200,0 = 54Consequently, for a receipt to a 1 litre of a 20% solution it is

necessary to take 946 мл of the cleared water 1000-54=946ml

Page 16: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

PREPARATION OF MIXTURESPREPARATION OF MIXTURES

Page 17: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

At preparation of dosage forms hold to the set procedure of dissolution and mixing of medications taking into account their physical and chemical properties.

Rule of preparation mixtures:Rule of preparation mixtures:

Page 18: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Always at first measure a distilled water. In the bottle in distilled water dissolve solid substances in a next sequence – at first narcotic, poisonous, strong affective, then general list. (at first – heavily soluble, and then – easily soluble), If sum of solid substances more than 3 % take into account the coefficient of increase of volume.

Page 19: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Percolation in a small bottle through the double layers of gauze, or tampon

Add the concentrated solutions from the burette system, at first narcotics, after that general list in order according to the prescription

Add not fragrant and non-flying liquids ( syrups, tinctures); then alcoholic liquids, in the order of growth of concentration of alcohol; are fragrant and volatile liquids

Page 20: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Rp: Analgіnі 3,0 Kalіі bromіdі 4,0 Aquae purіfіcatae 200ml Tіncturae Beladonnae 8ml Tіncturae Valerіanae 10ml Mіsсe. Da.

Sіgna. 1 soup-spoon 3 times a day

Page 21: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Total volume: 200ml+10ml+8ml=218ml.

Concentrated solution Kalіі bromіdі 20% (1:5) 4,05=20ml.

Analgіnі 3,0218 ml – 3,0 100 ml – Х Х = 1,7% (1,7% 3%)

Aquae purіfіcatae 200-20 = 180 ml

WCP (reverse side):WCP (reverse side):

Page 22: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Date prescription № Aquae purіfіcatae 180ml Analgіnі 3,0 Solutіonіs Kalіі bromіdі (1:5) 20ml Tіncturae Beladonnae 8ml Tіncturae Valerіanae 10ml V total = 218 ml Has prepared: Has checked up:

WCP (front side):WCP (front side):

Page 23: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

In porcelain cup measure off 180 ml of cleared water and dissolve 3,0 of analgin. Solution percolate through a piece of wool in a small bottle for dispense. There measure off 20 ml of solution potassium bromide (1:5), then tincture of Belladonna, in the last turn measure off the tincture of valerian (prepared on a 70% alcohol). Glue on the number of recipe, label "Mixture",, “Shake before use ".

Page 24: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

Rp: Kalіі іodіdі Natrіі bromіdі aa 5,0 Glucosі 15,0 Aquae purіfіcatae 180ml Mіsсe. Da. Sіgna. 1 tablespoon 3 times a

day. At first determine the percentage of the

total glucose mixture. 180 ml - 15.0100 ml – X X = 8,3%, more than 3%.

Page 25: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

15.00,69=10,35(ml), is much more tolerance than in 3,6 ml.

In this case calculation of amount of water for recipe conduct by such method : the concentrated solution- sodiums bromide 20% (1:5) and potassium bromide 20% (1:5) it is necessary to take for 25ml (5,0 5=25); water: 180ml-(25ml+25ml+10,35ml)=119,6ml

Technology of preparation following: in porcelain cup measure off 120ml of water (better warm) and dissolve a 15.0 glucose, percolate solution in a small bottle for dispense; there measure off for 25ml 20% solution of potassium iodide and 20% concentrated solution-sodium

bromide. Labels are "Mixture", to "Keep in a cool place", number of recipe.

Page 26: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

WPC Date № prescription Aquae purіfіcatae 120ml

Glucosі 15,0 Solutіonіs Kalіі іodіdі (1:5) 25ml

Solutіonіs Natrіі bromіdі (1:5) 25ml V total =180ml

Prepared:

Checked:

Page 27: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

WPC r.s.Rp: Kalіі bromіdі Natrіі bromіdі aa 2,0 Aquae Menthae ad 200ml Mіsсe. Da. Sіgna. 1 table spoon 3 times a day.

WPC f.s.Date № prescriptionAquae Menthae 200mlKalіі bromіdі 2,0Natrіі bromіdі 2,0V tot. = 200mlPrepared:Checked:

Page 28: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out
Page 29: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

In the case, when of the recipe as a solvent prescribed flavored water is allowed to use concentrated solutions of powdery substances and Capacity factor of increased do not use.

Technology: measure off 200 ml of water mint and dissolve in it 2.0 sodium bromide and potassium bromide, and then filtered in the bottle for dispensing.

Page 30: LIQUID DOSAGE FORMS PART I. All liquid dosage forms are dispersed systems in which medical substance (the internal phase) is dispersed uniformly though-out

THANK YOU FOR ATTENTION!THANK YOU FOR ATTENTION!