liquid crystal display module - densitron · 2020. 11. 2. · if the liquid crystal touches your...

Product No. TUR10971EW102G76WIL REV. 02 / 31

Copyright ©2016 DENSITRON CORPORATION All rights reserved. – Proprietary Data FORM No. DT-029 V2

LIQUID CRYSTAL DISPLAY MODULE

Product Specification

PRODUCT NUMBER TUR10971EW102G76WIL

INTERNAL APPROVALS Engineering Document Control

Product No. TUR10971FW102G76WIL REV. 02 / 31


TABLE OF CONTENTS LIQUID CRYSTAL DISPLAY MODULE ...................................................... 1

PRODUCT SPECIFICATION .......................................................................... 1

1 MAIN FEATURES ....................................................................................... 4

2 MECHANICAL DRAWING ....................................................................... 5

3 ABSOLUTE MAXIMUM RATINGS ........................................................ 6

4 ELECTRICAL CHARACTERISTICS ...................................................... 6

5 BACKLIGHT CHARACTERISTICS ....................................................... 7

5.1 LED DRIVING CONDITIONS ................................................................................. 7

6 PROJECTED CAPACITIVE TOUCH PANEL ....................................... 8

6.1 OPERATING CONDITION ...................................................................................... 8

7 INTERFACE TIMING ................................................................................ 9

7.1 INPUT SIGNAL TIMING SPECIFICATIONS ......................................................... 9

8 OPTICAL CHARACTERISTICS ............................................................ 20

8.1 OPTICAL SPECIFICATION ................................................................................... 20

9 INTERFACE PIN ASSIGNMENT ........................................................... 23

9.1 LCM PIN ASSIGNMENT ........................................................................................ 23

10 RELIABILITY............................................................................................ 25

10.1 RELIABILITY TEST ............................................................................................... 25

11 STANDARD SPECIFICATION FOR PRODUCT QUALITY ............. 26

11.1 DELIVERY INSPECTION STANDARDS ............................................................. 26 11.2 INSPECTION CRITERIA ....................................................................................... 27

12 PART NUMBER LABELLING ................................................................ 30

13 HANDLING PRECAUTIONS .................................................................. 31



REVISION RECORD

Rev. Date Page Sec. Comment ECN No.

00 6/6/18 -- -- Preliminary release TBD

01 8/28/18

--

-- Mechanical Drawing modified TBD

02 9/18/18

--

-- Mechanical Drawing modified TBD



1 MAIN FEATURES

ITEM DESCRIPTION UNIT

Screen Size 9.7” Diagonal in

Outline Dimension 228.1 (W) x 187.9 (H) x 8.03 (D) mm

Display Format 1024 x 768 dots

Viewing Area 197.61 (W) x 148.46 (H) mm

Active Area 196.6 (W) x 147.46 (H) mm

LCD Type Transmissive / Normally Black --

Viewing Angle Free --

Backlight Type LED (350 Cd/m2 Brightness) --

Interface LCD: LVDS PCT: USB --

Operating Temperature 0 ~ 50 °C

Storage Temperature -20 ~ 60 °C

RoHS Compliant Yes --



2 MECHANICAL DRAWING



3 ABSOLUTE MAXIMUM RATINGS

4 ELECTRICAL CHARACTERISTICS RECOMMENDED OPERATING CONDITION



5 BACKLIGHT CHARACTERISTICS 5.1 LED DRIVING CONDITIONS



6 PROJECTED CAPACITIVE TOUCH PANEL

6.1 OPERATING CONDITION



7 INTERFACE TIMING

7.1 INPUT SIGNAL TIMING SPECIFICATIONS AC ELECTRICAL CHARACTERISTICS



DC ELECTRICAL CHARACTERISTICS



TIMING



DATA INPUT FORMAT



LVDS MODE DATA INPUT FORMAT



POWER ON/OFF SEQUENCE



8 OPTICAL CHARACTERISTICS

8.1 OPTICAL SPECIFICATION



9 INTERFACE PIN ASSIGNMENT

9.1 LCM PIN ASSIGNMENT



10 RELIABILITY

10.1 RELIABILITY TEST



11 STANDARD SPECIFICATION FOR PRODUCT QUALITY

11.1 DELIVERY INSPECTION STANDARDS

Environmental Conditions

Sampling Conditions



11.2 INSPECTION CRITERIA Cosmetic Inspection (Panel):



Functional Inspection:



12 PART NUMBER LABELLING All parts will be labelled with the below Part Number.

* where “Rev X” denotes the current Revision and YY and MM the 2-digit Year and Month of manufacture *where “Country” denotes the origin of the manufacture

DENSITRON TUR10971EW102G76WIL *Rev X

**COUNTRY *YYMM



13 HANDLING PRECAUTIONS Safety If the LCD panel breaks, be careful not to get the liquid crystal fluid in your mouth or in your eyes. If the liquid crystal touches your skin or clothes, wash it off immediately using soap and plenty of water. Mounting and Design Place a transparent plate (e.g. acrylic, polycarbonate or glass) on the display surface to protect the display from external pressure. Leave a small gap between the transparent plate and the display surface. When assembling with a zebra connector, clean the surface of the pads with alcohol and keep the surrounding air very clean. Design the system so that no input signal is given unless the power supply voltage is applied. Caution during LCD Cleaning Lightly wipe the display surface with a soft cloth soaked with Isopropyl alcohol, Ethyl alcohol or Trichlorotriflorothane. Do not wipe the display surface with dry or hard materials that will damage the polarizer surface. Do not use aromatic solvents (toluene and xylene), or ketonic solvents (ketone and acetone). Caution against Static Charge As the display uses C-MOS LSI drivers, connect any unused input terminals to VDD or VSS. Do not input any signals before power is turned on. Also, ground your body, work / assembly table and assembly equipment to protect against static electricity. Packaging Displays use LCD elements, and must be treated as such. Avoid strong shock and drop from a height. To prevent displays from degradation, do not operate or store them exposed directly to sunlight or high temperature / humidity. Caution during Operation It is indispensable to drive the display within the specified voltage limit since excessive voltage shortens its life. Direct current causes an electrochemical reaction with remarkable deterioration of the display quality. Give careful consideration to prevent direct current during ON/OFF timing and during operation. Response time is extremely delayed at temperatures lower than the operating temperature range while, at high temperatures, displays become dark. However, this phenomenon is reversible and does not mean a malfunction or a display that has been permanently damaged. If the display area is pushed on hard during operation, some graphics will be abnormally displayed but returns to a normal condition after turning off the display once. Even a small amount of condensation on the contact pads (terminals) can cause an electro-chemical reaction which causes missing rows and columns. Give careful attention to avoid condensation. Storage Store the display in a dark place where the temperature is 25°C ± 10°C and the humidity below 50% RH. Store the display in a clean environment, free from dust, organic solvents and corrosive gases. Do not crash, shake or jolt the display (including accessories).

liquid crystal display module - densitron · 2020. 11. 2. · if the liquid crystal touches your...

Documents